1827u_en

2015 Training CoursesElectrical engineering - Power electronics - Electromechanical products

Drive systems - Alternators

1827 en - 2014.12 / u

The Leroy-Somer Training Centre in Angouleme offers a complete range of technical training courses on motors, gearboxes, brakes, drives, starters, drive systems, alternators.

Because you all have different needs, the Training Centre adapts to your requirements, using dedicated training material and techniques.

From the basics to proficiency, each traineewill benefit from an appropriate level of training.

Codes

GENERAL TRAINING - THEORY

GENERAL TRAINING - PRACTICE

SPECIFIC PRODUCT TRAINING - PRACTICE

SOFTWARE - APPLICATIONS TRAINING

CUSTOMISED TRAINING

SELECTION

OPERATION

MAINTENANCE

Types of training

Topics

EDITORIAL

Electrical engineering

Power electronics

Electromechanical products

Alternators

Drive systems

Contents

GENERAL TRAINING - THEORY

GENERAL TRAINING - PRACTICE

SPECIFIC PRODUCT TRAINING - PRACTICE

SOFTWARE - APPLICATIONS TRAINING

CUSTOMISED TRAINING

PRACTICAL INFORMATION

FIT 100 - Definition and selection of drive systems - Beginner ................................................................ 4FIT 200 - Energy optimization .................................................................................................................. 5FAT 120 - Definition and selection of drive systems - Advanced .............................................................. 6FAT 159 - Definition of variable speed products ....................................................................................... 7FAT 160 - Definition and selection of UNIDRIVE M .................................................................................. 8ALT 1 - Definition and selection of alternators - Beginner ........................................................................ 9ALT 2 - Definition and selection of alternators - Advanced ..................................................................... 10

EXP 4 - D.C. variable speed drive MENTOR MP-DMV ......................................................................... 15EXP 5 - A.C. variable speed drive POWERDRIVE ................................................................................. 16EXP 6 - Electronic starters DIGISTART .................................................................................................. 17EXP 7 - Variable speed drive for servomotor DIGITAX ST ..................................................................... 18EXP 9.a - A.C. variable speed drive DIGIDRIVE SK/PROXIDRIVE ....................................................... 19EXP 9.b - A.C. variable speed drive UNIDRIVE SP ............................................................................... 20EXP 15 - A.C. variable speed VARMECA .............................................................................................. 21EXP 30 - A.C. variable speed Regenerative POWERDRIVE ................................................................. 22EXP 40.a - A.C. variable speed UNIDRIVE M100 to M400 .................................................................... 23EXP 40.b - A.C. variable speed UNIDRIVE M600 to M702 .................................................................... 24EXP 41 - Migration to UNIDRIVE M ....................................................................................................... 25AVR 1 - Analog AVRs for PARTNER LOW VOLTAGE alternators .......................................................... 26AVR 2 - Digital AVRs for PARTNER LOW VOLTAGE alternators ........................................................... 27AVR 3 - Analog AVRs for POWER range alternators (R600) ................................................................. 28AVR 4 - Digital AVRs for POWER alternators range (D600) .................................................................. 29ALT 3 - Maintenance for alternators ....................................................................................................... 30

EXP 1 - Introduction to A.C. and D.C. variable speed ............................................................................ 11EXP 2 - Geared motors and brake motors ............................................................................................. 12EXP 3 - A.C. variable speed ................................................................................................................... 13EXP 10 - D.C. motors ............................................................................................................................. 14

EXP 8 - Applications (Hoisting, PID, Pumping, Position Control, Digital Lock) ...................................... 31EXP 14 - Position Control application (SMPos card) .............................................................................. 32

Customised training courses .................................................................................................................. 33

Practical information and enrolment ....................................................................................................... 34General conditions of training ................................................................................................................. 35

4

DE

CID

ING

ON

TH

E P

RO

DU

CT

Definition and selection of drive systemsFIT 100Level: Beginner

After completing the course, trainees will be able to:

- Identify the basic drive system components- Use catalogues and the configurator in standard mode- Define and select motors and gearboxes for a "fixed speed" simple application

OBJECTIVES

Price: €875 ex tax/traineeDuration: 3 daysNo. of people*: 3 to 8 participantsPrerequisites: None Location: Training Centre Content: 20% exercises - 80% theory

INTENDED FOR

- Design office staff- Technical sales representatives- Manufacturers- Users/owners- Distributors- Service centres

PROGRAMME

- Applications and their environments (standards, directives, etc)- Electrical and mechanical concepts applied to motors and gearboxes

- Details of drive system ranges with induction motors - Presentation and use of tools (technical catalogues and configurator)

APPLICATION PRODUCTS

- Induction motors (special ranges and applications)- Brake motors: FMC, FCR, FAP, FCPL- Gearboxes: Compabloc, Multibloc, Orthobloc, Manubloc

*The Course is confirmed once at least 3 inter and/or intra company participants have signed up.

Please ask us for the [email protected]

5

DE

CID

ING

ON

TH

E P

RO

DU

CT


- Expanding your business promoting sustainable development in proposing drive system solutions with reduced energy consumption- Selecting LEROY-SOMER products which promote Energy Optimization according application and its Return On Investment- Understanding French white certificate C2E

OBJECTIVES

Price: €400 ex tax/traineeDuration: 1 dayNo. of people*: 4 to 8 participantsPrerequisites:Knowledge of the Leroy-Somer range of drive systemsLocation: Training Centre Content: 30% exercises - 70% theory

INTENDED FOR

- You are in charge of an industrial or commercial site to improve the energy efficiency of drive systems fitted to your applications: pumping, fan, conveyors, ...- You are responsible for Energy- You are in charge in the Engineering Department to carry out an energy audit on drive systems (motors, geared motors, variable speed)

PROGRAM

- Basic theory: transfer of Energy, efficiency, active and reactive power- Technology of the products

• Asynchronous motors high efficiency - Synchronous motors - Gears - Electronic soft start and variable speed drive

- Understand the application in its global system• Diagnostics - Opportunities, identifying applications - Electrical measurement - Technology choice - Return on investment

- Understand the new Directive on efficiency- Investment for saving energy according to french rules, certificates EEC


- Asynchronous and synchronous motors- Variable speed drive and soft start



Energy optimization of drive systemsFIT 200Level: Basic

6

DE

CID

ING

ON

TH

E P

RO

DU

CT

Definition and selection of drive systemsFAT 120Level: Advanced


- Select and optimise the drive system according to the application- Make the sizing calculations- Define and select the starting controller according to the application

OBJECTIVES

Price: €1210 ex tax/traineeDuration: 3 daysNo. of people*: 3 to 8 participantsPrerequisites: FIT 100 or Knowledge of the Leroy-Somer range of drive systemsLocation: Training Centre Content: 30% exercises - 70% theory

INTENDED FOR

- Design office staff- Technical sales representatives- Manufacturers- Users/owners- Service centres

PROGRAMME

- Calculations of forces and machine input according to the type of application

- Use of catalogues and the configurator - In-depth study of electrical and mechanical concepts specific to motors- Characteristics and selection of starting controllers


- LSES range of induction motors- Brake motors: FMC, FCR, FCPL- Gearboxes: Compabloc, Multibloc, Orthobloc, Manubloc - Starting controllers: Digistart D2 and D3



7

DE

CID

ING

ON

TH

E P

RO

DU

CT

Definition of variable speed productsFAT 159Level: Intermediate


- Identify the different variable speed systems- Use determination tools- Define and select variable speed drive systems according to the application being driven

OBJECTIVES

Price: €1287 ex tax/traineeDuration: 4 daysNo. of people*: 3 to 8 participantsPrerequisites: FIT 100+ BR certificationLocation: Training CentreContent: 40% exercises - 60% theory

INTENDED FOR

- Technical sales representatives- Design office staff- Manufacturers- Distributors/owners- Service centres

PROGRAMME

- Explanation of variable speed motor technologies- Various applications and related needs- Presentation of MS, LSK motor ranges - Presentation of MENTOR MP drive ranges- D.C. drive system calculations- Presentation of synchronous and asynchronous motor ranges - Presentation of drive ranges for synchronous and asynchronous motors

- Sizing exercises for several applications- Calculation methods (power, torque, energy savings)- Presentation of technical catalogues, selection methods


- Asynchronous, synchronous and D.C. motors- MENTOR MP drive range- Drive ranges for A.C. motors: DIGIDRIVE SK, UNIDRIVE SP, POWERDRIVE, DIGITAX



8

DE

CID

ING

ON

TH

E P

RO

DU

CT

Definition and selection of UNIDRIVE MFAT 160Level: Intermediate


- Identify systems to use UNIDRIVE M- Use determination tools- Define and select variable speed drive systems according to the application being driven

OBJECTIVES

Price: €850 ex tax/traineeDuration: 2 daysNo. of people*: 3 to 6 participantsPrerequisites: FIT 100+ BR certificationLocation: Training Centre Content: 40% practical - 60% theory

INTENDED FOR

- Design office staff- Technical sales representatives- Users/Owners- Distributors- Service centres

PROGRAMME

- Explanation of the various A.C. variable speed motor technologies- Various applications and their needs- Presentation of synchronous and asynchronous motor ranges - Presentation of UNIDRIVE M drive ranges- Calculation methods (power, torque, energy savings)- Presentation of technical catalogues and configurations, catalogue selection method

- Sizing exercises for several applications


- UNIDRIVE M100-200-300-400-600-700



9

DE

CID

ING

ON

TH

E P

RO

DU

CT

Definition and selection of alternatorsALT 1Level: Beginner


- Explain how an alternator works (mechanical constructions and configurations)- Identify the principles of alternator excitation and regulation- Select an alternator in the catalogue

OBJECTIVES

Price: €875 ex tax/traineeDuration: 2 daysNo. of people*: 4 to 8 participantsPrerequisites: None Location: Leroy-Somer factorySillac Content: 100% theory

INTENDED FOR

- Design office staff- Technical sales representatives- Genset builders- Users/Owners- Service centres

PROGRAMME

- Reminder of the fundamentals of electricity for alternators- Excitation systems- Regulation and parallel operation modes- Electrical engineering concepts applied to alternators - Main mechanical aspects: construction (IM), protection (IP), cooling (IC)

- Presentation of the LS range: design and manufacture


- Synchronous alternators in the Leroy-Somer range



10

DE

CID

ING

ON

TH

E P

RO

DU

CT

Definition and selection of alternatorsALT 2Level: Advanced


- Understand the principles of alternator excitation and regulation- Identify electrical parameters and mechanical configurations in detail- Select an alternator from a specification

OBJECTIVES

Price: €1313 ex tax/traineeDuration: 3 daysNo. of people*: 4 to 8 participantsPrerequisites: Basic electrical engineering knowledgeLocation: Leroy-Somer factorySillacContent: 30% exercises -70% theory

INTENDED FOR

- Design office staff- Technical sales representatives- Genset builders- Users/Owners- Service centres

PROGRAMME

- Reminder of the fundamentals of different excitation systems- Presentation of regulation and parallel operation modes- Demonstration of help options: LAM, U/F, matching, AREP, etc- Presentation of electrical engineering concepts for alternators (insulation, temperature rises, harmonics, neutral point, reactance, PQ diagram, IEEE diagram, curves, etc)

- Presentation of the mechanical aspects: construction (IM), protection (IP), cooling (IC), shields, terminal box

- Actual case study based on trainees' experiences


- Synchronous alternators in the Leroy-Somer range



11

GE

NE

RA

L TR

AIN

ING

Introduction to A.C. and D.C. variable speedEXP 1Level: Beginner


- Perform basic commissioning of induction motors- Understand the basics of various variable speed drive systems

OBJECTIVES

Price: €885 ex tax/traineeDuration: 3 daysNo. of people*: 3 to 6 participantsPrerequisites: BR certificationLocation: Training Centre Content: 60% practical - 40% theory

INTENDED FOR

- New technicians- Design office staff- Maintenance department personnel- Users/Owners- Manufacturers- Distributors- Service centres

PROGRAMME

- Operating principle of the various electric motor technologies- Operating principle and setup of D.C. variable speed - Operating principle and setup of A.C. variable speed


- Induction motors and D.C. motors- Variable speed drives for induction motors- Variable speed drive for D.C. motors



12

G

EN

ER

AL

TRA

ININ

GGeared motors and brake motorsEXP 2Level: Advanced


- Understand in detail how gearboxes and brake motors work - Use maintenance manuals- Perform diagnostics prior to intervention- Dismantle, assemble, set up gearboxes and brakes

OBJECTIVES

INTENDED FOR

- Design office staff- Maintenance department personnel- Users/Owners- Partners- Service centres

PROGRAMME

- Basic knowledge adapted to each product- Using maintenance manuals- Product technical characteristics - Diagnostics prior to intervention- Dismantling, assembling and setting up gearboxes and brakes


- Gearboxes: Compabloc (Cb 2000 and 3000), Orthobloc, Mecabloc, Multibloc, Manubloc

- Brake motors: FAST, FCO, FCL, FAP, FCPL, FCR, FMC

Price: €1400 ex tax/traineeDuration: 4 daysNo. of people*: 3 to 6 participantsPrerequisites: BR certificationLocation: Leroy-Somer factoryGond Pontouvre Content: 50% practical - 50% theory



13

GE

NE

RA

L TR

AIN

ING

A.C. variable speed EXP 3Level: Advanced


- Install and wire up asynchronous and synchronous variable speed systems- Configure the drive inputs and outputs- Diagnose a malfunction using the drive error messages- Back up or restore drive settings

OBJECTIVES

Price: €1308 ex tax/traineeDuration: 3 daysNo. of people*: 3 to 6 participantsPrerequisites: BR certification+ EXP 1Location: Training Centre Content: 60% practical - 40% theory

INTENDED FOR

- Technicians- Design office staff- Users/Owners- Distributors- Manufacturers- Service centres

PROGRAMME

- Operating principle of flux vector drives- Drive installation in accordance with EMC recommendations- Commissioning open loop and closed loop flux vector drives- Diagnostics using error messages- Backing up and restoring settings


- LS, LSMV asynchronous motors - LSRPM, Unimotor synchronous motors- DIGIDRIVE SK, UNIDRIVE SP, PROXIDRIVE drives



14

G

EN

ER

AL

TRA

ININ

GD.C. motorsEXP 10Level: Advanced


- Understand how D.C. motors work- Diagnose malfunctions on a D.C. motor- Make various checks and measurements on D.C. motors

OBJECTIVES

INTENDED FOR

- Technicians- Maintenance department personnel- Users/Owners- Manufacturers- Distributors- Service centres

PROGRAMME

- Composition of the D.C. motor- Presentation of the ranges and different types of motor- Explanation of motor switching and the power supply form factor- Method for estimating whether all the brushes/commutators are working properly (viewing patina, Westinghouse scale)

- Method for viewing the motor power supply signals using an oscilloscope

- Checking the motor insulation- Checking the field coil and motor armature power supply signals- Checking the commutator dimensions- Checking the mechanical strength of the brushes- Methods for running in the brushes and adjusting the neutral line


- D.C. motors

Price: €741 ex tax/traineeDuration: 2 daysNo. of people*: 3 to 6 participantsPrerequisites: BR certificationLocation: Training Centre Content: 20% practical - 80% theory



15

SP

EC

IFIC

PR

OD

UC

T

D.C. variable speed drive - MENTOR MP - DMVEXP 4Level: Advanced


- Install and wire up D.C. variable speed systems- Commission and adjust drives according to the driven application- Diagnose a malfunction using the drive error messages- Back up and reload drive settings

OBJECTIVES

Price: €1308 ex tax/traineeDuration: 3 daysNo. of people*: 3 to 6 participantsPrerequisites: EXP 1 or knowledge of D.C. variable speed + BR certificationLocation: Training Centre Content: 50% practical - 50% theory

INTENDED FOR

- Technicians - Design office staff- Distributors- Users/Owners- Manufacturers- Service centres

PROGRAMME

- Operating principles of D.C. motors and drives- Installation, wiring and commissioning- Study of internal function blocks- Diagnostics and error messages- Using backup media (Smartcard, CTSoft)- FXMP25 field excitation control option


- D.C. motors- DMV, MENTOR MP variable speed drives- On-load motor drive benches



16

S

PE

CIF

IC P

RO

DU

CT

A.C. variable speed drive - POWERDRIVEEXP 5Level: Advanced


- Set up POWERDRIVE variable speed drive, excluding regeneration- Diagnose malfunctions in the drive- Replace the electronic power components

OBJECTIVES

INTENDED FOR

- Design office staff- Technicians- Users/Owners- Manufacturers- Distributors- Service centres

PROGRAMME

- Understanding the principles of high-power variable speed control- Using technical catalogues- Installing, commissioning and backing up POWERDRIVE parameter settings

- Diagnosing malfunctions in the POWERDRIVE- Changing drive sub-assemblies


- Asynchronous motors - POWERDRIVE variable speed drive

Price: €1308 ex tax/traineeDuration: 3 daysNo. of people*: 3 to 4 participantsPrerequisites: EXP 3+ Knowledge of A.C. variable speed + BR certificationLocation: Training CentreContent: 60% practical - 40% theory



17

SP

EC

IFIC

PR

OD

UC

T

Electronic starters - DIGISTARTEXP 6Level: Intermediate


- Identify the starting phase for asynchronous motors- Install and wire up starting controllers- Adjust starting controllers according to specific applications- Diagnose malfunctions and failures

OBJECTIVES

Price: €741 ex tax/traineeDuration: 2 daysNo. of people*: 3 to 6 participantsPrerequisites: Basic electro-mechanicalknowledge + BR certificationLocation: Training CentreContent: 50% practical - 50% theory

INTENDED FOR

- Technicians - Users/Owners- Manufacturers- Distributors- Service centres

PROGRAMME

- Reminder of the operating principles of starting controllers- Electrical and mechanical characteristics of the DIGISTART- Installation, wiring and commissioning - Diagnostics and error messages- Using backup media (DIGISTART SOFT)- Presentation of the main options


- Asynchronous motors - DIGISTART D2-D3 starting controllers



18

S

PE

CIF

IC P

RO

DU

CT

Variable speed drive for servomotor - DIGITAX STEXP 7Level: Advanced


- Install and wire up DIGITAX ST drives- Commission and adjust DIGITAX ST drives according to the driven application- Diagnose a malfunction using DIGITAX ST error messages- Back up or restore settings in DIGITAX ST drives

OBJECTIVES

INTENDED FOR

- Technicians - Design office staff- Users/Owners- Manufacturers- Distributors- Service centres

PROGRAMME

- Operating principle of Brushless motors and DIGITAX ST drives- Setting up DIGITAX STB or STP for motor control - Setting up DIGITAX STB and STP with the positioner- Setting up DIGITAX STI (Indexers) using the CTSoft software


- Unimotor FM and HD self-starting synchronous motors- Drives in the DIGITAX ST range (Base, Indexer, Plus)

Price: €1308 ex tax/traineeDuration: 3 daysNo. of people*: 3 to 6 participantsPrerequisites: EXP 3+ BR certificationLocation: Training Centre Content: 50% practical - 50% theory



19

SP

EC

IFIC

PR

OD

UC

T

A.C. variable speed drive - DIGIDRIVE SK/PROXIDRIVE EXP 9.aLevel: Intermediate


- Use the detailed synoptic views in the technical documents- Configure and use the internal functions of DIGIDRIVE SK and PROXIDRIVE drives- Use the PC tools available for these products

OBJECTIVES


INTENDED FOR

- Technicians - Distributors- Users/Owners- Manufacturers- Service centres

PROGRAMME

- Presentation and composition of technical documents - Explanation of what the parameters represent- Presentation of PC tools and how to use them (CTSoft, CTScope, ProxiSoft)

- Presentation of the motor control menu synoptic views- Explanation of how torque regulation works- Presentation of the drive I/O configuration synoptic views- Programmable logic, faster/slower, binary sum- Comparator, transfer of variable, electromechanical brake control- PID, use with replica master


- Asynchronous motors - Drive for asynchronous motors: DIGIDRIVE SK, PROXIDRIVE



20

S

PE

CIF

IC P

RO

DU

CT

A.C. variable speed drive - UNIDRIVE SPEXP 9.bLevel: Intermediate


- Use the detailed synoptic views in the technical documents- Configure and use the internal functions of UNIDRIVE SP drives- Use the PC tools available for these products

OBJECTIVES

INTENDED FOR

- Technicians - Users/Owners- Manufacturers- Distributors- Service centres

PROGRAMME

- Presentation and composition of technical documents - Explanation of what the parameters represent- Presentation of PC tools and how to use them (CTSoft, CTScope)- Presentation of the motor control menu synoptic views- Explanation of how torque regulation works- Programmable logic, faster/slower, binary sum- Synchronisation function (electrical shaft), index stop- Comparator, transfer of variable, electromechanical brake control- PID, use with replica master


- UNIDRIVE SP variable speed drive for asynchronous and synchronous motors (LSRPM and Brushless)




21

SP

EC

IFIC

PR

OD

UC

T

A.C. variable speed drive - VARMECAEXP 15Level: Intermediate


- Set up a VARMECA drive

OBJECTIVES


INTENDED FOR

- Technicians - Users/Owners- Manufacturers- Distributors- Partners

PROGRAMME

- Understanding how A.C. variable speed control works- Using dedicated catalogues- Installing, commissioning and backing up the VARMECA parameter settings- Diagnosing malfunctions in the VARMECA


- VARMECA motor-drive



22

S

PE

CIF

IC P

RO

DU

CT

A.C. variable speed drive - Regenerative POWERDRIVE EXP 30Level: Advanced


- Understand how A.C. drive regeneration works- Use dedicated technical catalogues- Diagnose malfunctions in the drive regenerative function

OBJECTIVES

INTENDED FOR

- Technicians- Design office staff- Distributors- Users/Owners- Manufacturers- Service centres

PROGRAMME

- Reminder of how the regeneration function works- Electrical characteristics of the various regenerative drives- Installation, wiring and commissioning - Diagnostics and error messages- Using backup media (mdx soft)


- Regenerative POWERDRIVE A.C. variable speed drive

Price: €1308 ex tax/traineeDuration: 3 daysNo. of people*: 2 to 4 participantsPrerequisites: BR certification+ very good knowledge of variable speed controlLocation: Training Centre Content: 75% practical - 25% theory



23

SP

EC

IFIC

PR

OD

UC

T

A.C. variable speed drive - UNIDRIVE M100 to M400EXP 40.aLevel: Intermediate


- Install and wire up UNIDRIVE M100 to M400 drives- Use automatic drive configurations- Diagnose a malfunction from error messages- Back up and reload application settings

OBJECTIVES

Price: €896 ex tax/traineeDuration: 2 daysNo. of people*: 3 to 6 participantsPrerequisites: EXP 1 or basic knowledge of variable speed control + BR certificationLocation: Training Centre Content: 50% practical - 50% theory

INTENDED FOR

- Technicians- Design office staff- Users/Owners- Manufacturers- Distributors- Service centres

PROGRAMME

- How the U/F ratio works- How open loop flux vector control works- Presentation of UNIDRIVE M100 to M400 drives- Wiring scheme for drives in factory configuration- Commissioning principle for M100 to M400 drives- Messages: operating states, alarms, errors- Important read-only parameters- Backing up and reloading settings with backup media and PC tools (UNIDRIVE M Connect)


- UNIDRIVE M100 to M400 universal drive



24

S

PE

CIF

IC P

RO

DU

CT

A.C. variable speed drive - UNIDRIVE M600 to M702EXP 40.bLevel: Intermediate

After completing the course, trainees will be able to:- Install and wire up UNIDRIVE M600 to M702 drives- Commission and adjust drives- Use and configure the drive's internal functions from menu synoptic views- Diagnose a malfunction from error messages- Back up and reload application settings

OBJECTIVES

INTENDED FOR

- Technicians- Design office staff- Distributors- Users/Owners- Manufacturers- Service centres

PROGRAMME

- How open loop and closed loop flux vector control work, how synchronous motors work

- Performance with standard motors and adapted motors- Presentation of UNIDRIVE M600 to M702 drives - Commissioning principle for M600 to M702 drives- Using the drive menu synoptic views (motor control, drive configuration, Ethernet, Easymade, AMC)

- Messages: operating states, alarms, errors- Backing up and restoring settings with backup media and PC tools (UNIDRIVE M Connect)






25

SP

EC

IFIC

PR

OD

UC

T

Migration to UNIDRIVE M EXP 41Level: Intermediate


- Replace a DIGIDRIVE SK with a UNIDRIVE M200 or M400- Replace a UNIDRIVE SP with a UNIDRIVE M701- Back up or reload settings in the new drives

OBJECTIVES

Price: €1184 ex tax/traineeDuration: 3 daysNo. of people*: 3 to 6 participantsPrerequisites: EXP 3 recommended basic knowledge of A.C. variable speed control + BR certificationLocation: Training Centre Content: 50% practical - 50% theory

INTENDED FOR

- Technicians- Design office staff- Users/Owners- Manufacturers- Distributors- Service centres

PROGRAMME

- Comparative presentation of old and new drive ranges- Comparative presentation of wiring schemes for old and new generations

- Comparative commissioning principle for a DIGIDRIVE SK and a UNIDRIVE M200 or M400

- Comparative commissioning principle for a UNIDRIVE SP and a UNIDRIVE M701

- Configuration of the main internal functions in new-generation drives

- Messages: operating states, alarms, errors- Backing up and reloading settings with backup media or software (UNIDRIVE M Connect)





26

S

PE

CIF

IC P

RO

DU

CT

Analog AVRs for PARTNER LOW VOLTAGE alternatorsAVR 1Level: Intermediate

OBJECTIVES

INTENDED FOR

- Maintenance department personnel- Design office staff- After-sales service staff- Users/Owners- Genset builders- Service centres

PROGRAMME

- Field excitation systems in detail- Presentation of the whole AVR range- Presentation, details of AVR settings, connections - Presentation of AVRs and additional modules- Practical examples of use: voltage regulation, power factor, KVAr, stability settings


- AVRs: R220, R250, R438, R450, R449, etc- R726, R731 additional modules

Price: €978 ex tax/traineeDuration: 2 daysNo. of people*: 2 to 4 participantsPrerequisites: ALT1 recommended + BR certificationLocation: Leroy-Somer factorySillac Content: 75% practical - 25% theory


- Connect AVRs (AVR range for PARTNER alternator)- Adjust analog AVRs - Diagnose incorrect AVR operation



27

SP

EC

IFIC

PR

OD

UC

T

Digital AVR for PARTNER LOW VOLTAGE alternatorsAVR 2Level: Intermediate


- Connect the digital AVR for the PARTNER range- Adjust the digital AVR - Diagnose incorrect AVR operation- Use the Easyreg software

OBJECTIVES

Price: €978 ex tax/traineeDuration: 2 daysNo. of people*: 2 to 4 participantsPrerequisites: ALT 1 recommended+ BR certificationLocation: Leroy-Somer factory Sillac or Orleans Content: 75% practical - 25% theory

INTENDED FOR


PROGRAMME

- Field excitation systems in detail- Presentation, details of D510C settings, connections- Practical examples of use: voltage regulation, power factor, KVAr, stability settings and manual mode


- D510C digital AVR



28

S

PE

CIF

IC P

RO

DU

CT

Analog AVRs for alternators in the POWER range (R600)AVR 3Level: Intermediate

OBJECTIVES

INTENDED FOR


PROGRAMME

- Field excitation systems in detail- Presentation of the analog range- AVR settings and connections- Practical examples of use: voltage regulation, power factor, KVAr, stability settings


- Analog AVRs in the R610 and R630 range For MEDIUM AND HIGH VOLTAGE alternators in the POWER range

Price: €978 ex tax/traineeDuration: 2 daysNo. of people*: 2 to 4 participantsPrerequisites: ALT 1 recommended+ BR certificationLocation: Leroy-Somer factoryOrleans Content: 75% practical - 25% theory


- Connect AVRs (R610 and R630)- Adjust analog AVRs - Diagnose incorrect AVR operation



29

SP

EC

IFIC

PR

OD

UC

T

Digital AVRs for alternators in the POWER range (D600)AVR 4Level: Intermediate


- Connect and adjust digital AVRs in the POWER range (D610 and D630)- Configure digital AVRs with SUPD600- Diagnose incorrect AVR operation

OBJECTIVES

Price: €978 ex tax/traineeDuration: 2 daysNo. of people*: 2 to 4 participantsPrerequisites: ALT 1 recommended+ BR certificationLocation: Leroy-Somer factory Orleans Content: 75% practical - 25% theory

INTENDED FOR


PROGRAMME

- Field excitation systems in detail- Presentation of the digital range- AVR settings and connections- How the SUPD600 software works- Practical examples of use: voltage regulation, power factor, KVAr, stability settings


- Analog AVRs in the D600 range (D610 and D630) For MEDIUM AND HIGH VOLTAGE alternators in the POWER range



30

S

PE

CIF

IC P

RO

DU

CT

Maintenance for alternatorsALT 3

INTENDED FOR

- Maintenance department personnel- Design office staff- After-sales service staff- Users, Owners- Genset builders- Service centres

PROGRAMME

A flexible programme, adapted to meet your requirements, focusing on alternator maintenance in our workshops, for example:- Recommended maintenance programme- Taking measurements- Dismantling/reassembling alternators- Using manuals, etc


- Alternator type to be defined to suit your needs

CUSTOMISED TRAINING

For all information (objectives, programme, price, duration, no. of people, course location),contact us on +33 (0)5 45 94 59 03


31

SO

FTW

AR

E -

AP

PLI

CAT

ION

S

Applications (Hoisting, PID, Pumping, Position Control, Digital Lock)EXP 8Level: Advanced


- Install, wire up, and commission the DIGIDRIVE SK/UNIDRIVE M400 with the Pumping option- Install, wire up, and commission the UNIDRIVE SP/M with the Hoisting option- Install, wire up, and commission the UNIDRIVE SP/M with the Position Control option- Install, wire up, and commission the UNIDRIVE SP/M with the Digital Lock option

OBJECTIVES

Price: €1678 ex tax/traineeDuration: 4 daysNo. of people*: 3 to 6 participantsPrerequisites: EXP 3 and EXP 9recommended + BR certificationLocation: Training Centre Content: 60% practical - 40% theory

INTENDED FOR

- Technicians - Design office staff- After-sales service staff- Users/Owners- Manufacturers- Genset builders- Service centres

PROGRAMME

- How regulation works (PID)- Setting up a DIGIDRIVE SK with its Logicstick for Pumping applications and UNIDRIVE M400 with its pumping program

- Setting up the UNIDRIVE SP with its Hoisting application card- Setting up a UNIDRIVE SP and M700 with its Position Control application card

- Setting up a UNIDRIVE SP with its Digital Lock application card


- Asynchronous and synchronous motors- DIGIDRIVE SK, UNIDRIVE SP drives- CTScope, CTSoft, LSSoft PC tools



32

S

OFT

WA

RE

- A

PP

LIC

ATIO

NS

OBJECTIVES

Position Control application (SMPos card)EXP 14Level: Advanced

INTENDED FOR

- Technicians- Design office staff- After-sales service staff- Users/Owners- Distributors- Service centres

PROGRAMME

- Demands of the Position control function - Wiring up the UNIDRIVE SP/M with its positioner- Commissioning the UNIDRIVE SP/M with its Position control application card

- Precautions to be taken with control via fieldbus- Diagnostics using Position control application error messages- Backing up the Position control application settings


- Asynchronous and synchronous motors- UNIDRIVE SP, UNIDRIVE M drives- CTScope, CTSoft, LSSoft PC, UNIDRIVE M Connect tools

Price: €911 ex tax/traineeDuration: 2 daysNo. of people*: 3 to 6 participantsPrerequisites: EXP 3 or knowledge of UNIDRIVE SP + BR certificationLocation: Training Centre Content: 60% practical - 40% theory


- Install, wire up, and commission the UNIDRIVE SP/M with the Position Control application SM option



33

TAIL

OR

ED

TR

AIN

ING

TAIL

OR

ED

TR

AIN

ING

Customised training courses

CUSTOMISED TRAINING

We organise customised training courses on the definition, selection, operation and maintenance of the following Leroy-Somer product families in order to meet your specific needs:

- A.C. motors- D.C. motors- Brake motors- Geared motors- Electronic starting controllers- A.C. variable speed drives and variable speed motors- D.C. variable speed drives and variable speed motors- Applications: position control, winding-unwinding, hoisting, digital lock- Alternators

These are tailored training courses held for groups of up to a maximum of 6 people, at the Training Centre or on your premises.

How can I book customised training?

Through a sales office: www.leroy-somer.comBy telephone: +33 (0)5 45 94 59 03 By e-mail: [email protected] or [email protected]

34

PR

AC

TIC

AL

INFO

RM

ATIO

NPractical information and enrolment

POITIERS

BORDEAUXCOGNACSAINTES

LA ROCHELLE

ANGOULEME

LIMOGES

Zone des Montagnes

CHAMPNIERS

Exit for Angoulême Nord Espace

Commercial et Hôtelier

Exit for Espace Commercial et Hôtelier

Exit for LIMOGES then Angoulême Nord

Espace Commercial et Hôtelier

N10

N10

N141

Training Centre

D910

Leroy-Somer Training Centre39 rue des Figuiers - 16430 Champniers

GPS coordinates N: 45° 42,54.004’ - E: 0° 11,27.852’

Close to the Training CentreIBISEspace Hôtelier - 46 rue des Meneaux16430 CHAMPNIERSTel. +33 (0)5 45 69 16 16IBIS STYLES*Espace Hôtelier - 122 rue des Meneaux16430 CHAMPNIERSTel. +33 (0)5 45 68 53 22IBIS BUDGETEspace Hôtelier - 122 rue des Meneaux16430 CHAMPNIERSTel. +33 (0)5 45 90 38 80FASTHOTELRN 10 - 16160 GOND PONTOUVRETel. +33 (0)5 45 69 23 00KYRIAD*RN 10 - 16430 CHAMPNIERSTel. +33 (0)5 45 68 03 22FORMULE 1RN 10 - 16430 CHAMPNIERSTel. +33 (0)8 91 70 53 52

Close to the StationTERMINUS1 Place de la Gare - 16000 ANGOULEMETel. +33 (0)5 45 92 39 00

Town CentreMERCUREPlace des Halles - 16000 ANGOULÊMETel. +33 (0)5 45 95 47 95LE PALAISPlace F. Louvel - 16000 ANGOULEMETel. +33 (0)5 45 92 54 11EUROPEEN1 place Gérard Pérot - 16000 ANGOULEMETel. +33 (0)5 45 92 06 42

How can I sign up for a standard training course?

By telephone: +33 (0)5 45 94 59 03/Fax: +33 (0)5 45 94 59 44 By e-mail: [email protected] or [email protected] a sales office: www.leroy-somer.com

How can I finance my training?

If your company is obliged to participate in funding professional training through an OPCA (Approved Vocational Training Fund in France), they make a contribution to it.

Alternatively, your OPCA may pay for your training (or part of it). In that case you should apply to your vocational training fund four weeks in advance of the course.

*Special rates have been agreed for anyone attending training courses at the Leroy-Somer CFE, at the KYRIAD hotel (+33 (0)5 45 68 03 22) and IBIS Style hotel (+33 (0)5 45 68 53 22)

35

PR

AC

TIC

AL

INFO

RM

ATIO

N

General conditions of training

1. GENERAL INFORMATION

1.1 By signing the enrolment form the trainee accepts these general training conditions for the training courses provided by the LEROY-SOMER Training Centre without reservation.

1.2 The LEROY-SOMER Training Centre reserves the right to demand payment in cash before the start of the training course, following examination of the enrolment file (enrolment form or specific tender).

1.3 Enrolment on the training course will only be definite once a confirmation of enrolment file is sent by the LEROY-SOMER Training Centre, consisting of: the training programme, training agreement, accommodation conditions.

2. ENROLMENT

2.1 With the general conditions above fulfilled, enrolment is only booked upon receipt at the LEROY-SOMER Training Centre of the signed training agreement.

2.2 The number of participants may vary between 6 and 12 people maximum depending on the nature of the training course. The LEROY-SOMER Training Centre will process enrolments taking into account the arrival order of enrolment forms up to the limit in the number of planned participants.

2.3 In accordance with the recommendation of French electronics organisation Union Technique de l'Electricité (ref. UTE.C 18530 from May 1990), trainees must be certified to work with electrical equipment that is switched on, before starting a training programme. To this end they must provide the certification (BR). If this is not provided then the LEROY-SOMER Training Centre reserves the right to exclude them from any work carried out on electrical devices that are switched on and declines all liability, in particular in the event of an accident causing physical injury to said trainees.

3. INVOICING - PAYMENT

3.1 An invoice in duplicate will be produced for the training course (one copy of which must be returned signed to the LEROY-SOMER Training Centre along with payment).

3.2 Payments must be made by bank cheque or bank transfer in favour of MOTEURS LEROY-SOMER. 3.3 Any sum remaining unpaid by the settlement date will lead to the customer paying late payment penalties set at three times

the legal rate of interest. On top of the above late payment penalties, the customer will be liable to pay a flat fee of €40 for collection costs. The LEROY-SOMER Training Centre nonetheless reserves the right to demand an additional payment, on production of the evidence, should the costs actually outlaid be higher than this amount. In the event of funding for the training under the French FAF or ASFO schemes, the required information must be stated on the enrolment form under the “Payment body” section.

4. TRAINING COST

4.1 The prices of our training courses as stated in the catalogue apply to training courses run at the LEROY-SOMER Training Centre.

These prices include training, meals and breaks. In the event that the LEROY-SOMER trainer is to provide the training at another location, a quote will be subject to prior acceptance by the customer.

5. CONDITIONS FOR CANCELLATION

5.1 The LEROY-SOMER Training Centre reserves the right to postpone or cancel a training course for any reason whatsoever. 5.2 In this event no compensation can be claimed at all from the Training Centre.5.3 In the event of a cancellation of enrolment by the customer which is received at the LEROY-SOMER Training Centre less than

15 working days before the start of the training course, the LEROY-SOMER Training Centre will invoice a sum equivalent to 20% of the total amount of the training course to cover administrative costs.

6. DATA PROTECTION

6.1 Information of a personal nature communicated by the customer to the LEROY-SOMER Training Centre in application and execution of orders and/or sales can be communicated to contractual partners of the LEROY-SOMER Training Centre for the purpose of fulfilling such orders. In accordance with national regulations applicable to these records, the customer can write to the LEROY-SOMER Training Centre to ask for any such information concerning him not to be given out. He can also at any time exercise his rights to access and correct information in the Training Centre records.

7. DISPUTES

7.1 Any disputes concerning the interpretation or execution of these general conditions or of the training course will be subject to the competent courts in Angoulême.

Leroy-Somer Training Centre16915 Angoulême Cedex 9

Tel. +(33) 5 45 94 59 03 - Fax +(33) 5 45 94 59 44

www.leroy-somer.com

www.emersonindustrial.com

© Emerson 2014. The information contained in this brochure is for guidance only and does not form part of any contract. The accuracy cannot be guaranteed as Emerson have an ongoing process of development and reserve the right to change the specification of their products without notice.

Control Techniques Limited. Registered Office: The Gro, Newtown, Powys SY16 3BE. Registered in England and Wales. Company Reg. No. 01236886

Moteurs Leroy-Somer SAS. Headquarters: Bd Marcellin Leroy, CS 10015, 16915 Angoulême Cedex 9, France. Share Capital: 65 800 512 €, RCS Angoulême 338 567 258.

1827u_en

Documents

variable speed varmeca

variable speed unidrive

variable speed unidrive

appropriate level of

dedicated training material

selection of unidrive

selection of alternators

electronic starters