2005-2006 Aprilia Pegaso - PCIII USB - 1i926-411 www.powercommander.com

2005-2006 Aprilia PegasoInstallation Instructions

Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89081 (800) 992-4993 www.powercommander.com

Parts List1 Power Commander1 USB Cable1 CD-ROM1 Installation Guide1 Power Adapter2 Power Commander Decals2 Dynojet Decals2 Velcro® Strip1 Alcohol Swab1 Wire tap

You can also download the PowerCommander software and latest mapsfrom our web site at:

www.powercommander.com

The ignition MUST be turnedOFF before installation!

PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION

Button Adjustment Display

Faceplate Buttons

USB PortExpansion Port

1 Remove seat.

2 Remove left and right sidecovers.

3 Remove the fuel tank

4 Locate the connector from themain wiring harness to the injector and uplug this connector (Fig. A).

NOTE: This connector is grey in color.

5 Plug the connectors from thePCIII in-line of the stock wiringharness and throttle body(Fig. B).

6 Locate the throttle position con-nector (TPS) on the right handside of the throttle bodies.

7 Crimp the supplied wire tap tothe GREEN wire of the stockwiring harness (Fig. C).

8 Connect the GREY wire fromthe PCIII to the wire tap.

It is recommended to use dielec-tric grease on these connections.

Fig.

AFi

g. B

Fig.

C

2005-2006 Aprilia Pegaso - PCIII USB - 2i926-411 www.powercommander.com

PCIII connectors

Stock connector

Unplug this connector

Grey wire from PCIII

Wire tap

9 Attach the ground wire from thePower Commander to the nega-tive side of the battery. (Fig. D)

10 Install the Power Commander inthe trunk using the suppliedVelcro. Make sure to clean bothsurfaces with the supplied alco-hol swab before attaching.

11 Make sure all wires are routedproperly before bolting down thefuel tank and reinstalling theseat.

Fig.

D

2005-2006 Aprilia Pegaso - PCIII USB - 3i926-411 www.powercommander.com

Fig.

E

Ground wire

PCIII harness