2010 edition product cataloguec - bj howes

2010 EditionProduct CatalogueC

Disclaimer, warranties and limitation of liability

This publication is intended to be an aid for all trades and professionals involved with specifying and installing LYSAGHTproducts and not to be a substitute for professional judgement.

Terms and conditions of sale available at local BlueScopeLysaght sales offices.

Except to the extent to which liability may not lawfully be excluded or limited, BlueScope Steel Limited will not be under or incur any liability to you for any direct or indirect loss or damage (including, without limitation, consequential loss or damage such as loss of profit or anticipated profit, loss of use, damage to goodwill and loss due to delay) however caused (including, without limitation, breach of contract, negligence and/or breach of statute), which you may suffer or incur in connection with this publication.

© Copyright BlueScope Steel Limited 15 December, 2009

LYSAGHT Product Catalogue – 2010 Edition

LYSAGHT Product Catalogue – 2010 Edition i

Product TestingOur Research & Development Department laboratory is NATA-registered and tests our products to ensure accuracy and reliability of our data.

Your suggestionsPlease send your suggestions for improvements to this publication to: The Publications Officer, BlueScope Lysaght R & D, 27 Sterling Road, Minchinbury NSW 2770

Product Descriptions All descriptions, specifications, illustrations, drawings, data, dimensions and weights contained this catalogue, all technical literature and websites containing information from BlueScope Lysaght are approximations only. They are intended by BlueScopeLysaght to be a general description for information and identification purposes and donot create a sale by description. BlueScope Lysaght reserves the right at any time to:(a) supply Goods with such minor modifications from its drawingsand specifications as it sees fit; and(b) alter specifications shown in its promotional literature to reflect changes made after the date of such publication.

WarrantiesThe LYSAGHT brand has been synonymous with the Australianbuilding industry for over 150 years. With such a strong and proud Australian history, BlueScope Lysaght continue to manufacture high quality building products from 100% Australian steel.

Our continuing confidence in our products is shown in the unique warranties we offer.

We invite you to ask about the warranties applicable to your proposed purchase and the eligibility terms at your local LYSAGHT supplier.

All descriptions, specifications, illustrations, drawings, data, dimensions and weights contained in this catalogue and other price lists, technical literature, websites or other advertising matter of BlueScopeLysaght are approximations only. They are intended by BlueScopeLysaght to be a general description for information and identification purposes and do not create a sale by description. BlueScope Lysaght reserves the right at any time to:(a) supply Goods with such minor modifications from its drawings and specifications as it sees fit; and(b) alter specifications shown in its promotional literature to reflect changes made after the date of such publication.

Availability of productsIn most commercial aspects, refer to the relevant State price list to determine the details of the available product offer and service offer with regards to colour availability, product details and charges, including transportation and minimum order quantities.

Normally products are not shipped interstate, as it cannot be guaranteed what condition fragile products might arrive.

It is important that you ask your local BlueScope Lysaghtrepresentatives about the availability and delivery times for the products you want to use.

Product AvailabilityBlack areas on map indicate the product is in the region's product offer. However, in some regions product availability to subject to enquiry and minimum order quantities may apply. These have been indicated where this applies.

Unshaded areas on map indicate that the product is not available in that region.

AbbreviationsBMT = Base metal thicknessMPa = MegaPascals (units of

pressure)CB = COLORBOND colours

on ZINCALUME steelor stainless steel

Cu = CopperGB = GALVABOND steel

unpaintedSS = Stainless steelZL = ZINCALUME steel

unpaintedMeasurements are millimetres, unless otherwise noted.

Further information

literature, please visit our website: www.lysaght.com.

available by contacting theSTEEL DIRECT Technical Information Service on 1800 641 417.

LYSAGHT products.

LYSAGHT has been part of Australia’s architectural and building heritage, shaping so much of what’s been admired in homes and buildings throughout the country’s landscape. We're proud of our reputation for quality, integrity and expertise.

And since BlueScope Lysaght is part of BlueScope Steel, you know we stand behind the products we sell - year after year.

Our wide range of products and our experience are available to enhance your project. We hope you find this catalogue helpful.

ProductAvailability

ii LYSAGHT Product Catalogue – 2010 Edition

Apron flashing See

Astragal See straps.

Barge A finishing at the gable end of a roof, fixed parallel to the roof slope.

BRITEWITE® Paintedunderside of BONDEK to improve ceiling appearance.

BMT Base metal thickness

Box gutter A gutter not at an eave, typically at the base of two opposing roof slopes.

Capping A cover at the top of a gap that weatherproofs, typically at the ridge of a pitched roof.

Chimney gutter See soaker

Cladding Sheeting that encloses a building — roofing and walling.

COLORBOND® Prepainted aluminium-zinc coated steel sheeting.

Concealed-fastened A method of fixing cladding by means of hidden, fixing clips or brackets (sometimes called secret fixing).

Downpipe A pipe to carry roof water from gutters and roof catchments to drains or storage tanks.

Drop See pop.

Eaves gutter A roof gutter attached at an eaves overhang.

Elbow A fitting used in a downpipe, to change direction of the downpipe by about 90 degrees.

Electrolytic (galvanic) corrosion Corrosion resulting from the contact of two different metals when an electrolyte (like water) is present.

Expansion joint A joint in a long run of cladding, gutter or flashing designed to allow for thermal expansion and contraction.

Fall (slope) The slope of the roof or gutter, often expressed in degrees, or as a ratio of vertical height to horizontal distance (e.g. 1 in 20).

Fascia (fascia board) A board, or rolled metal product of similar dimensions, fixed along the eaves, to which a gutter is secured.

Fixings Screws, nails or clouts used to fasten cladding to a building structure.

Flashing A material, usually metal, used to waterproof the junction between two intersecting roof and/or wall surfaces. At a masonry wall, it is often built into the mortar.

Apron flashing

A horizontal flashing installed where the top end of a roof slope meets a vertical projection, such as a chimney or parapet wall.

Counter (or over) flashing A flashing dressed down as a cover only, over a separate upstand.

Hanging flashing side,front or back cover piece used to prevent entry of water between abutting surfaces and other gutters, flashings and soakers.

Soaker flashing

weatherproof the perimeter of roof protrusions or penetrations. Soaker flashings are usually positioned under rather than over the surrounding metal roof.

GALVASPAN® Galvanisedsteel sheeting protected against corrosion by a zinc coating applied by the continuous hot-dip process.

Girth The width of the blank strip from which a profile is rolled (usually refers to gutters and flashings).

Gutter A channel that collects roof water and carries it to an outlet.

Mansard A roof built at two pitches, the steeper pitch commencing at the eaves and the flatter pitch finishing at the ridge.

Nozzle See Pop.

Offset A pipe fitting that directs a downpipe from the gutter, under the eaves soffit and down a wall.

Oilcanning Variation from flatness of sheet metal, creating undulations along the surface. The result is poor appearance and potential ponding.

Pan The flat portion between the ribs in a pan-type pre-formed sheet.

Parapet A wall on the perimeter of a building that projects above the line of the eaves.

Penetration A projection through the roof, e.g. vent pipe, chimney or rooflight.

Pierce-fastened A method of fixing cladding by means of a screw or nail which pierces the cladding.

Pitch see fall.

Ponding Pooling of undrained water on a roof.

Pop A short fitting in a gutter sole, where rainwater leaves the gutter.

Rainhead A box-shaped receptacle sometimes used between gutters and downpipes to provide an external overflow point.

R-value A value given for the resistance to heat transfer of a roof or wall system.

Rib A longitudinal upstand in cladding.

Ridge capping designed to weatherproof the junction at the apex of opposing roof slopes.

Saddle strap See straps.

Sarking A membrane to collect and discharge clear of the structure any water that may penetrate a roof or wall cladding.

Shoe A fitting used in a downpipe, to change direction of the downpipe by about 45 degrees.

Soaker (gutter) A small gutter located on the upper side of a chimneystack.

Soaker (flashings) Seeunder flashings.

Sole The internal, bottom surface of a roof gutter.

Spigot See Pop.

Spreader A downpipe-tee or elbow fixed at 90 degrees to the roof slope used to spread stormwater over a greater area of the roof.

Spouting See Gutter.

Straps A metal band used to secure a downpipe to a wall.

Sump A roof gutter pit used to connect downpipes to internal roof gutters.

Trays See Pan.

Thermal stress Stressdue to expansion and contraction caused by changes in temperature.

Thermal stress Stressdue to expansion and contraction caused by changes in temperature.

THERMATECH® Innovativenew paint technology which improves thermal performance of roof and wall claddings.

Valley boards Timber or profiled metal laid under a valley gutter to support it.

ZINCALUME® Steel sheeting protected against corrosion by an aluminium-zinc coating.

Glossary

CONTENTS

ROOFING 1

General notes on cladding 1CUSTOM ORB® 2CUSTOM BLUE ORB® 2Curved flashings 3Bullnose order form 4INTEGRITY® 820 5KLIP-LOK® 700 HI-STRENGTH® 6KLIP-LOK 406 7KLIP-LOK MAXIMA® 8LONGLINE® 305 9LONGLINE® 305 Tapered 9SPANDEK® 10SPANRIB® 10TRIMDEK® 11

® 12

WALLINGEASYCLAD® 13EASYCLAD® EH300 14MULTICLAD® 14MINI ORB® 15PANELRIB® 16TRIMWALL® 16WALLCLAD® 17Weatherboard 17

RAINWATER PRODUCTS 18

Flashings & CappingsStandard flashings & cappings 18Non-standard flashings, cappings, gutters 21Fascias, Gutters & DownpipesNOVALINE® fascia system 22NOVALINE® rebate fascia 22NOVALINE® fascia cover 22EMLINE® gutter 23TRIMLINE® gutter 23SHEERLINE® gutter 24Quad 150 & 175 gutter 25Hi-front Quad gutter 26Lo-front Quad gutter 26LYSAGHT OGEE® gutter 26Half-round gutter 27

® gutter 27RANCELINE® gutter 28COLONIAL® gutter 28Custom W.A. gutters 28Downpipes: Square & rectangular 29Pops 29Elbows & Shoes 30

Downpipe Offsets 30Downpipes: Round 31Pops/Nozzles/Drops 32Elbows/Shoes/Straps 32Downpipe Offsets/Crimped Bend 33Standoff Brackets/Chinamans Hat 33

ACCESSORIES 34

Accessory sheet 34

Strapping (coils) 34Silicone sealant 35Soft zinc flashing 35Tools (turn-up & turn-down) 35Ventilated ridges 36Louvres 36Box gutter brackets 37Box gutter sumps 37Box gutter expansion joints 37Rainwater heads 38Transitions, roof collars & overflows 38

Translucent sheeting 39Weatherlok® washers 39Lapseal 39Ant caps 40Dektite® pipe flashings 40Roof infill strips 40Safety mesh 41Ventilators: Industrial & Domestic 41

–Screw to steel 44

–Screw to timber 44

Insulation: Reflective foil laminate 45Insulation: Building blanket with foil 45Insulation: Building blanket 45Insulation: Ceiling batts 45Insulation: Wall batts 45

STRUCTURAL PRODUCTS 46

Zeds & Cees (Purlins & Girts) 46LYSAGHT SA Cee Section 46SUPAPURLINS: SUPAZEDS & SUPACEES® 47Dimensions of SUPAZEDS & SUPACEES 48

Hole Gauge Lines 49Purlin accessories 49HOOK-LOK® II bridging system 51Series 300 and 350 bridging system 52

TOPSPAN® light steel sections 54Associated top hat products 54Structural Steel decks 55BONDEK® and accessories 56LYSAGHT W-DEK® 57POWERDEK® 57Cold-formed sections: Standard 58Handy-C system 58INTERLOK® II 59INTERLOK® II stair treads 59Handiplank® 59

HOUSE FRAMING 60

SUPRATRUSS® - components 60®- components 61

SMARTRUSS® 63® 64

FENCING 65

MANDALAY™ fence 67

Gate Options 69

HOME IMPROVEMENTS 71

Lysaght Living Collection 71® 72® II 72® beams 73

Patio post 74

SERVICE & SUPPORT 75

LYSAGHT Website, Call Centre, R&D Dept. 75

INDEX 76

MAINTENANCE 78Cladding and Rainwater goods 78

WARRANTY INFORMATION 79Cladding and Rainwater goods 79

LYSAGHT Product Catalogue – 2010 Edition iii

iv LYSAGHT Product Catalogue – 2010 Edition

NOVALINE fascia system featuring LYSAGHTQuad gutter

®

LYSAGHT MINISCREEN® Plus

LYSAGHT Product Catalogue – 2010 Edition 1

Where appropriate, the following specifications apply to our roofing and walling products.

Materials

ZINCALUME® aluminium/zinc alloy-coated steel complying with AS 1397—2001

ZINC HI-TEN® zinc-coated steel complying with AS 1397—2001

designation is AISI/ASTM Type 430; UNS No. S43000

COLORBOND® prepainted steel complies with AS/NZS 2728:2007.

TestingOur products offer the full benefits of the latest methods for modelling wind pressures. Wind pressure capacity tables are determined by full-scale tests conducted at BlueScopeLysaght’s NATA registered testing laboratory, using our direct pressure-testing rig.

We also test for concentrated loading (foot traffic) and spring curving.

Metal & timber compatibility

Contact with, or runoff from, some materials can damage coated steel products. Buildingscan also be susceptible to condensation on inside surfaces.

The materials include certain metals, treated timbers and chemicals.

Incompatiblematerials include:

with COLORBOND®

stainless cladding)

treated timber (like CCAor tanalith treatments)

of dryness and wetness

moisture content (such as improperly-seasoned timber)

the atmosphere

coated steel products with incompatible materials.

rainwater from incompatible materials onto coated steel products.

members are compatible with the coated steel products or, alternatively, appropriately coated.

If there are doubts about the compatibility of other products being used, seek advice from our information line.

General notes on cladding

Clad

ding

2 LYSAGHT Product Catalogue – 2010 Edition

762mm cover(10.5 corrugations)

Overlap Underlap16mm

762mm cover (10.5 corrugations)or

608mm cover (8 corrugations)

17mmOverlap Underlap

LYSAGHT

LYSAGHT CUSTOM ORB®

is the famous Australiancorrugated profile. CUSTOMORB is equally at home with traditional and contemporary designs. It is available in two base metal thicknesses, and

Use CUSTOM BLUEORB for curving.

See also LYSAGHT WALLCLADfor walling applications.

Base materialsSteel grade: G550Coating: AZ150BMT: 0.42 & 0.48mm

LengthsLengths are custom cut. Check

supplier.

Mass (COLORBOND)BMT 0.42mm: 4.35 kg/m2-BMT 0.48mm: 4.93 kg/m2

TolerancesLength: + 10 mm, – 10mm Width: + 4 mm, – 4mm

Minimum roof pitch5 degrees (1:12)

FinishesA wide range of COLORBOND®

steel colours, COLORBOND®

metallic COLORBOND® stainlessand unpainted ZINCALUME®

steel.COLORBOND Metallic is

enquiry. COLORBOND Stainless is

enquiry.

Materials compatibility, standards & testingSee Page 1

CUSTOM ORB

LYSAGHT CUSTOM BLUEORB® is the curving quality, corrugated profile, famous throughout Australia.

There are two base metal thicknesses, and two widths with 762mm cover being the standard product. In NSW,

enquiry. In WA, 608mm cover is not available. Check in your state for finish and cover width.

Use CUSTOM ORB forapplications other than curving.

Base materialsSteel grade: G300Coating: AZ150 or Z600BMT: 0.60mm

LengthsLengths are custom cut.

with your supplier.

Mass (COLORBOND)BMT 0.60mm: 6.09 kg/m2

to enquiry and minimum order quantities apply.

TolerancesLength: + 10mm, – 10mm Width: + 2mm, – 2mm



CurvingSee below for flashings and

Finishes & coverUnpainted ZINCALUME steel:

mm coverWide range of COLORBONDsteel colours mm coverTanks AQUAPLATE® steel:

mm cover 8 & 10 corrugation CUSTOM BLUE ORBUnpainted zinc galvanised: 608 & 762mm cover

Some areas only stock the 762mm cover. Please refer to your local centre for availability.

CUSTOM BLUE ORBLYSAGHT

Standard width is 762mm.

ProductAvailability

ProductAvailability

Roof Claddings


Curved flashingsCurved flashings and cappingsare made in fibreglass, plasticand COLORBOND® steel colours. Straight flashings and cappings are also made to match.Different states stock different materials and different lengths— ask your local supplier.

ColoursAll colours available to match COLORBOND® steel standard colour range.

Concave

Convex Cyma recta

Ogee

180Barrel vault

Bullnose

Cranked double curve Pre-curved or cranked ridge

Custom Blue OrbTypes of curve

Remember

Accessories

Cappings

Curved flashings

Flashings

Fasteners

Insulation

Rainwater goods

Translucent sheetingMaterial is non-metallic fibre to suit bullnose curve. (Right hand illustrated.)

ProductAvailability

Roof

ing

Bullnose order form1 CUSTOMERCustomer

Contact person (First name Surname)

Order number

Delivery address

2 DATANumber of sheets required

Topside colour (or finish)TT

Direction of laying (see in right-hand column)

Left to right

Right to left

Does the bullnosed sheet end-lap onto a straight sheet?

Yes

No

Have you supplied a template? (Preferred method)

Yes

No

3 DIMENSIONS

Straight roof section ‘SR’

mm

Straight vertical section ‘SV’mm(100mm min., 80mm in Vic.)

Radius ‘R’

mm(300 min., 400 minimum in Qld & 400 minimum in W.A.)

Roof pitch ‘P’

degrees (5° min.)

Awning width ‘A’AA

mm

Height less straight vertical ‘H’

mm

BlueScope Lysaght use onlyCurved length Straight roof section Straight vertical section Total length of sheetTT

‘SR’ ‘SV’ for manufacture

mm mm mm mm

Pass length Nip depth Pass reduction

Stra

ight

ver

tical

sect

ion

'SV

'Se

e be

low

for

min

.

Awning width 'A'

Straight roof section 'SR'

Roofpitch'P' Radius 'R'

See below for min.

'H'

Left sideoverlap

Right sideoverlap

CROSS SECTION

FRONT VIEW

Feed in

Min

Overlap

Overlap


INTEGRITY 820

INTEGRITY 820® is a versatile cladding designed forcommercial and industrial applications, where fast and simple installation isa prime requirement.

The fasteners pierce thesheeting, however the unique

waterproofness on a par with

KLIP-LOK 700 HIGH STRENGTH®.

Note: INTEGRITY 820 is available by enquiry only and minimum order quantities apply.

Base materialsSteel grade: G550Coating: AZ150BMT: 0.42 & 0.48mmTT


supplier.


BMT 0.48mm: 5.3 kg/m2

TolerancesLength: + 0mm, – 15mmWidth: + 10mm, – 0mm

Minimum roof pitchBMT 0.42: 2 degrees BMT 0.48: 1 degree

FinishesA range of COLORBOND®

steel colours and unpaintedZINCALUME® steel.


LYSAGHT

Remember

Accessories

Cappings

Curved flashings

Flashings

Fasteners

Insulation

Rainwater goods

Translucent sheeting

Integrity optionalStyle capping strip

Integrity sealing platefor fasteners

ProductAvailability

820mm cover

48mm


Roof

ing

6 Lysaght Product Catalogue – 2007 Edition

KLIP-LOK 700 HI-STRENGTH

LYSAGHT KLIP-LOKHI-STRENGTH® cladding isa strong, durable, versatile cladding used for both roofs and walls. It is available in long lengths.

The concealed fastening system allows KLIP-LOK to be used on roofs as low as 1 degreepitch.

KLIP-LOK 700 HS is commonly used on industrial and

clean modern look on houses.

KLIP-LOK HS is available as a long-length on-site rollformed product. Contact your local sales office for details.

Base materialsSteel grade: G550Coating: AZ150

BMT KLIP-LOK 700 HS:0.42, 0.48 & 0.60mm*


supplier.KLIP-LOK 700 HS is also available in long lengths with our on-site rollforming capability.Contact your sales representative for details.

Mass (COLORBOND)

KLIP-LOK 700HS:BMT 0.42mm: 4.74 kg/m2

BMT 0.48mm: 5.17 kg/m2

BMT 0.60mm*: 6.63 kg/m2

*Available from mobile rollformer only.


Minimum roof pitchBMT 0.42: 2 degrees Other BMT: 1 degree


steel colours and unpainted ZINCALUME® steelFor KLIP-LOK 700HS,COLORBOND Metallic is

enquiry.COLORBOND Stainless is

enquiry.

Number of clips Number of clips = (number of

Materials compatibility, standards & testingSee Page 1.

Mobile rollforming for KLIP-LOK HI-STRENGTHis available in any state,

LYSAGHT

KLIP-LOK clip (availability as above)LYSAGHT

700 mm cover

43 mm

KLIP-LOK 700 Hi-strength

KL-700HS clip(For KLIP-LOK 700 Hi-Strength)

ProductAvailability


LYSAGHT KLIP-LOK 406

LYSAGHT KLIP-LOK 406 HIGH WIND

LYSAGHT KLIP-LOK®

cladding is a strong, durable, versatile cladding used for both roofs and walls. It is available in long lengths.

The concealed fastening system allows KLIP-LOK to be used on roofs as low as 1 degreepitch.

KLIP-LOK is commonly used on

but also gives a clean modern look on houses.

In the Northern Territory it is known as KLIP-LOK 406High Wind, and is cyclonicly

cyclonic screw assemblies.

Contact your local sales office for details.

Base materialsSteel grade: G550Coating: AZ150BMT KLIP-LOK 406:0.42, 0.48 & 0.60mm

In Northern Territory:Steel grade: G300BMT KLIP-LOK 406:0.55mm (standard)

applications)


supplier. Mass (COLORBOND)KLIP-LOK 406:BMT 0.42mm: 5.03 kg/m2

BMT 0.48mm: 5.71 kg/m2

BMT 0.60mm: 7.04 kg/m2



FinishesIn NT, ZINCALUME® steel is

quantities only.A range of COLORBOND®

steel colours and unpainted ZINCALUME® steel



KLIP-LOK 406 High Wind is made locally in NT.

Made in NSW.

KLIP-LOK 406 accessoriesLYSAGHT

406 mm cover

41 mm

KLIP-LOK 406

KL65

KL-65 clip(For KLIP-LOK 406)

Rib cap8 degrees for KL-406

(ZINCALUME®)(Not available in NSW)

ProductAvailability


Subject to enquiry in Qld & WA

Roof

ing


KLIP-LOK MAXIMA

LYSAGHT KLIP-LOK MAXIMA®

cladding is a strong, durable, versatile cladding used for both roofs and walls. It is available in long lengths.

The concealed fastening system allows KLIP-LOK MAXIMA to be used on roofs as low as 1 degreepitch.

KLIP-LOK MAXIMA is commonly used on industrial and

clean modern look on houses.

Contact your local sales office for details.

Base materialsSteel grade: G550Coating: AZ150BMT KLIP-LOK MAXIMA: 0.42, 0.48 & 0.60mm


supplier.KLIP-LOK 700HS is also available in long lengths with our on-site rollforming capability.Contact your sales representative for details.

Mass (COLORBOND)

KLIP-LOK MAXIMA: BMT 0.42mm: 4.34 kg/m2

BMT 0.48mm:4.91 kg/m2

BMT 0.60mm: 6.06 kg/m2




steel colours and unpainted ZINCALUME® steel

COLORBOND® Metallic is also available.



LYSAGHT

KLIP-LOK accessories (availability as per products, shown above)LYSAGHT

UnderlapOverlap

770mm cover31mm

KLIP-LOK MAXIMA clip(For KLIP-LOK MAXIMA)

KLIP-LOK MAXIMA

ProductAvailability


LONGLINE 305 (Subject to enquiry in Qld, SA & W.A.)

LONGLINE 305® is a long-standing favourite that accentuates clean straight lines with narrow ribs and smooth pans.

This is a very versatile profilethat can be tapered in its width (see below).

Base materialsSteel grade: G300Coating: AZ150BMT: 0.70 mmTT


supplier.

Mass (COLORBOND)BMT 0.70 mm: 9.81 kg/m2


Minimum roof pitch1 degree (1:60)

FinishesA limited range of COLORBOND®

steel colours and unpainted ZINCALUME® steel.


Made in NSW.

Top fixing clip

Clip for LONGLINE

LONGLINE 305 Tapered (Subject to enquiry in Qld, SA, W.A.)

LYSAGHT

LYSAGHT

Standard width(cover 305 mm)

Width reducedby approx. 12.5%

Width reducedby approx. 25%

LONGLINE 305 tapered

Remember

Accessories

Cappings

Curved flashings

Flashings

Fasteners

Insulation

Rainwater goods


305mm cover

48mm

We can taper LONGLINE 305 in its width to produce a sheetthat lends itself to a wide rangeof roof designs. The taper can bbe left-hand or right-hand (please seek advice upon ordering). You should seek advice on theYYavailable tapers for long spans,minimum lengths and highloadings.

ProductAvailability

ProductAvailability


Roof

ing

Remember

Accessories

Cappings

Curved flashings

Flashings

Fasteners

Insulation

Rainwater goods


LYSAGHT SLL PANDEK® is a contemporary-looking trapezoidal profile which isideal where a stronger, boldermore modern corrugated appearance is required. Userto specify roof or wall use.



supplier.


BMT 0.48mm: 5.57 kg/m2


Finishesrange of COLORBOND® steel

colours and unpainted ZINCALUME steelFor 0.48mm, COLORBOND®

to enquiry. For 0.42mm,COLORBOND® stainless is



SPANDEKLYSAGHT

LYSAGHT

700mm cover

24mm

LYSAGHT SLL PANRIB® claddingsystem provides the benefits of long spanning, pierced-

rainwater carrying capacity.

All overlapping ribs havespecially formed capillarygrooves to prevent waterentering at the side laps.

It has been designed forcommercial and industrial applications where long span and fast installation

Each sheet requires only four (4)fasteners per square metre, so installation is very fast and lesscostly.

Minimum order quantities apply.

Base materials Steel grade: G550Coating: AZ150

Stainless Steel AISI/ASTM TypeTT430; UNS No.:S43000BMT: 0.42mm or 0.48mm.TT

Lengths

Lengths are custom cut. Check

supplier.

Mass (COLORBOND)

0.42 mm 4.69 kg/m2

0.48 mm 5.31 kg/m2

Tolerances

Length: + 0mm, – 15mm Width: + 4mm, – 4mm

Minimum roof pitch

BMT 0.42: 2 degrees (1:30)BMT 0.48: 1 degree (1:50) ColoursA range of COLORBOND®


Materials compatibility,standards & testingSee Page 1

SPANRIB (Subject to enquiry in Qld & NSW)

ProductAvailability

ProductAvailability

820mm cover

48mm


TRIMDEK

LYSAGHT TRIMDLL EK® is a stylish, ribbed profile with subtle flutingin the pans to provide strength and long spanning capabilities. Equally suitable for domestic, industrial and commercialapplications.

See also LYSAGHT TRIMLL WAWW LLfor wall cladding applications.



supplier.

Mass (COLORBOND)BMT 0.42: 4.35 kg/m2

BMT 0.48: 4.96 kg/m2



colours and unpainted ZINCALUME steelCOLORBOND Metallic is

enquiry.COLORBOND Stainless is

enquiry.



LYSAGHT

Remember

Accessories

Cappings

Curved flashings

Flashings

Fasteners

Insulation

Rainwater goods


762mm cover

29mm

ProductAvailability


Roof

ing

ROOFTRAKROOFTRAK® provides a safe and stable surface for incidental access on ‘flat’ roofs. It may be installed parallel or at 90° to the ribs of roofing sheets.

There are male-male and male-female planks, as well as blanking plates, support and end plate brackets.

If you want to use ROOFTRAK 450, check that your regulatory authority allows this width because it is narrower than the minimum provided for in AS-1657—1992.

Supplied in kitsROOFTRAK is supplied in kits that include

DimensionsThe basic ‘plank’ nominally

is configured as:

ROOFTRAK 450 (two planks = 450mm wide); or

ROOFTRAK 675 (three planks = 675mm wide).

Lengths

MaterialZinc-coated steel to AS1397,G300, Z450 (300 MPa minimum yield stress, 450 g/m2 minimum coating mass). BMT = 1.2mm

ComponentsA = Plank (male-male) standard lengths 3m* or 6m*B = Plank (male-female) standard lengths 3m* or 6m*C = End Plate (Blanking plate)D = Support bracketE = L bracketF = Universal Support bracket* 3m = 3.018m and 6m = 6.073m

LYSAGHT

Male-male plank Male-female plank65

mm

65 m

m

225 mm(nominal)

225 mm(nominal)

Kit Description

ROOFTRAK 675

ROOFTRAK 675

ROOFTRAK 450

ROOFTRAK 450

ROOFTRAK 450

ROOFTRAK 450

ROOFTRAK 450

ROOFTRAK 450

ROOFTRAK 450

ROOFTRAK 675

ROOFTRAK 675

ROOFTRAK 675

ROOFTRAK 675

ROOFTRAK 675

F

RT450 shown. For RT675, add a 2nd male-female plank.

ProductAvailability


EASYCLAD (Subject to enquiry in WA)

It's called EASYCLAD® becauseit's easy to use and install on walls, soffit linings, ceilings, infillpanels and screens. The profile provides the illusion of timbersiding, with the strength of steel.It is not intended for roofing.

Simple (CD40) clips are used for

Subsequent sheets are nailed orscrewed. There is a wide range of trim sections.

Base materialsSteel grade: G550Coating: AZ150BMT: 0.42 mmTT


supplier.

Mass (COLORBOND)4.5 kg/m2

TolerancesLength: + 0 mm, – 15 mm Width: + 3 mm, – 3 mm




Made in NSW.Available as fluted product asstandard. Unfluted is available on request.

EASYCLAD TRIMSCustom sections can be madeto order.

LYSAGHT

CD5 External corner trim

28

28

28

28

CD24 Internal corner CD23 External corner

C

C

38

38 38

38

CD6 Internal corner CD5 External corner

C

C

Remember

Accessories

Cappings

Curved flashings

Flashings

Fasteners

Insulation

Rainwater goods


300 mm cover

19 mm

2PF 300

ProductAvailability


Wal

ling


LYSAGHT MULL LTILL CLAD® is a walling profile with a small trapezoidal rib. Its most common applications are as walls of sheds and garages.



supplier.


BMT 0.42mm: 3.9 kg/m2


Finishesrange of COLORBOND®

steel colours and unpainted ZINCALUME steelFor 0.42mm BMT COLORBOND®

stainless is also available


MULTICLAD (Subject to enquiry in WA)LYSAGHT

Remember

Accessories

Cappings

Curved flashings

Flashings

Fasteners

Insulation

Rainwater goods


840 mm cover

12 mm

ProductAvailability

EH300

EASYCLAD EH300® is used for walls, soffit linings, ceilings, infill panels and screens. It is not intended forroofing. It is available onlyin the Northern Territory.TT

The trims available in theNorthern Territory are CTT D1, CD4,CD6 AND CD27.

Base materialsSteel grade: G300Coating: AZ150

BMT: 0.55 mmTT


supplier.


TolerancesLength: + 0 mm, – 15 mm

Width: + 3 mm, – 3 mm



Materials compatibility, standards & testingSee Page 1Made in Darwin.

LYSAGHT

300 mm cover

14 mmProduct

Availability


ProductAvailability

MINI ORB

MINI ORB® is a corrugated sheet with reduced height of corrugation to the more traditional CUSTOM ORB profile. It is suitable for interior and

or curved surfaces; with the corrugations running vertically or horizontally.

This product is not suitable for roofing.

Base materialsSteel grade: G550Coating: AZ150BMT: 0.42 & 0.48mm (NSW 0.48mm by request only) (NSW & Qld 0.48mm metallic only available) (0.48mm n/a in SA)


supplier.


BMT 0.48mm: 4.51 kg/m2

(0.48mm n/a in VIC)

TolerancesLength: +0mm, – 15mm Width: +2mm, – 2mm

Finishes A range of COLORBOND® steelcolours and unpainted ZINCALUME® steelDouble-sided 0.35mm COLORBOND® steel available on request.


MINI ORB TRIMS

Custom sections can be made to order. (T

LYSAGHT

25

15 15

20 20

48

12

12

1833

20

28

28

38

38

28

28

38

38

CD20 Butt joint trim-Top hat

CD6 Internal corner CD5 External cornerCD22 Edge trim

CD21 Butt joint trim-Overlap CD24 Internal corner CD23 External corner

(Subject to enquiry in SA)

C

C

C

C

C

C

C= coloured face

28

22

17 15

28CD3 Fascia to soffit section CD5 External corner trim

3815

20

22

CD27 Fascia to soffit section

25

2810

28CD4 Feature section soffit

820mm cover

6mm

Wal

ling


LYSAGHT TRIMLL WAWW LL®

has trapezoidal ribs andpans that match LYSAGHTLLTRIMDEK. It is used forwalls, primarily on sheds.

Sheet coverage is the same as that of LYSAGHT TRIMDLL EK.

Base materialsSteel grade: G550Coating: AZ150BMT: 0.35mmTT


supplier.

Mass (COLORBOND)BMT: 0.35 mm: 3.60 kg/mTT 2

TolerancesLength: + 0 mm, – 10 mmWidth: + 4 mm, – 4 mm


steel colours, and unpaintedZINCALUME steel.Limited colour range in W.A.


TRIMWALLLYSAGHT

762 mm cover

29 mm

ProductAvailability

PANELRIB

LYSAGHTLL PANELRIB® is a lightlyfluted wall cladding or ceiling

straight or curved surfaces.

Base materialsSteel grade: G550Coating: AZ150BMT: 0.35 & 0.42 mmTT


supplier.

Mass (COLORBOND)BMT 0.35 mm: 3.2 kg/m2

BMT 0.42 mm: 3.8 kg/m2



colours and unpainted ZINCALUME steelFor 0.42 mm, COLORBOND®

stainless is also available


LYSAGHT

850 mm cover

4 mm

ProductAvailability

Remember

Accessories

Cappings

Curved flashings

Flashings

Fasteners

Insulation

Rainwater goods



WALLCLAD

LYSAGHT WALLCLAD® is a walling product to compliment LYSAGHT CUSTOM ORB andLYSAGHT CUSTOM BLUE ORB.

The sheet cover chart matches that of LYSAGHT CUSTOM ORB.

Base materialsSteel grade: G550Coating: AZ150BMT: 0.35mm


supplier.



FinishesA range of COLORBOND® steelcolours and unpainted ZINCALUME steel.


LYSAGHT

762 mm cover

16 mm

WeatherboardLYSAGHT

LYSAGHT Weatherboard is a walling product that matches traditional weatherboard.

For lengths over 6 m, contact your local BlueScope Lysaght office.

Base materialsSteel grade: G550Coating: AZ150BMT: 0.42 mm


supplier.




colours and unpainted ZINCALUME steel.


ProductAvailability

ProductAvailability

Wal

ling


Standard flashings & cappingsLYSAGHT

70

200

10

20160

New South WalesBarge cappingCUSTOM ORB & BLUE ORBCode: BCCO

TRIMDEK & SPANDEKCode: BCTDSD

KLIPLOKCode: BCKLQR

70

190

10

30120

70

180

10

40120

Barge rollCode: BR55

50dia.

2400 mm length only

Ridge capping*Nominate roof pitch

CUSTOM ORB & BLUE ORBCode: RCCO

TRIMDEK & SPANDEKCode: RCTDSD

KLIPLOKCode: RCKLQR

CUSTOM ORB & BLUE ORBCode: RC2

100 18020

160

100 17030

120

100 16040

120

10

230140 20

*Nominate angle

10

220140 30

10

210

deg˚

140 40

190

50 160 20

2400 mm length only

Barge roll cappingCode: BRCAP

Spear point

180180

30 30120˚

170170

30 30120

160160

40 40120

50

127

19300

127

19

Tile flashingCUSTOM ORB & BLUE ORBCode: TFCO

TRIMDEK & SPANDEKCode: TFTDSD

KLIPLOK & INTEGRITY 890Code: TFKLQR

Apron flashingCUSTOM ORB & BLUE ORBCode: AFCO

TRIMDEK & SPANDEKPPCode: AFTDSD

KLIPLOK & INTEGRITY 890Code: AFKLQR

INTEGRITY 820Code: AFSR

Apron flashingCUSTOM ORB & BLUE ORBCode: AFCO

TRIMDEK & SPANDEKCode: AFTDSD

KLIPLOK & INTEGRITY 890Code: AFKLQR

2020

180180

140210 210

145145

145

545

Valley flashingValley flashingCode: VF

Ribbed valleyCode: RV

Structural valleyCode: SV

Valley supportCode: VS

Barge gutter

Code: BG

deg˚

deg˚

120˚

120˚

120˚

120˚

120˚

120˚

berRememb

A riesccesso

Gutters

ndardNon-stansflashings

FastenersFasteners

ProductAvailability

ProductAvailability


LYSAGHT Standard flashings & cappings

25 25120

120

50

310

ProductAvailability

ProductAvailability

Rain

wat

er G

oods


Standard flashings & cappingsLYSAGHT

530 or 770 mm wide

SPANDEK & TRIMDEK

SPANDEK & TRIMDEK

Remember

Accessories

Gutters

Non-standardflashings

Fasteners

ProductAvailability

ProductAvailability


Non-standard flashings, cappings & gutters

A

B C

D

E

F

G HA

A

A

A

A

A

A

A

A

A

A

A

A

B

B

B

B

B

B

B

B

B

B

B

B

B

C

C

C

C

C

C

C

C

C

C

C

C

C

D

D

D

D

D

D

D

D

D

D

E

E

E

Profile typesType 1 (CF1)

Type 2 (CF2)

Type 3 (CF3)

Type 4 (CF4)

Type 5 (CF5)

Type 6 (CF11)

Type 7 (CF12)

Type 8 (CF13)

Type 9 (CF14)

Type 10 (CF15)

Type 11 (CF31)

Type 12 (CF32)

Type 13 (CF33)

Type 14 (CF35)

Order requirementsOn a sketch show1. Profile type2. Colour (or ZINCALUME

steel, or GALVABLL OND if notCOLORBOND steel)

3. Side on which colour is to be (use letters shown below)

4. Dimensions (use lettersshown below)

5. Angles on all bends that are not 90 degrees

6. Quantity and lengths

PreliminaryCheck with your localBlueScope Lysaght office for:

1. Available girth range2. Available colours3. Profiles not shown4. Maximum lengths5. Lead times6. How to handle

tapered flashings

LYSAGHTThis page shows some non-standard profiles. Please ask your local LYSAGHTLL office for other options.

egnarhtriG )mm(

00600105700200900300010040021005

Order example1. Profile type 5 (CF5)

2. Wilderness

3. Colour on ‘B’ side

4. A = 40, B = 80, C = 18

5. Angle B–C = 135 degrees

6. 4 of 2750 mm

ProductAvailability

Rain

wat

er G

oods


NOVALINE® fascia systemLYSAGHT NOVALINE® is a fascia system that integrates with most of our gutters. It comprises:

The fascia A metal fixing bracket One of many gutters A spring clip that clips the gutter to the fascia

An overstrap that adds support to the gutter

NOTE: In WA a NOVALINE REBATE fascia is also available.

AvailabilityNOVALINE fascia is available in all states, though the Western Australian fascia has a different profile, and the following restricted accessories:

External and internal corners Spring clips Stop ends (End closer) Splice plates

Compatible guttersEMLINEQuad 115 Hi-/Lo-FrontQuad 125Quad 150

Square Bead QuadTRIMLINELYSAGHT Ogee

RANCELINEColonial1/4 round

FinishesCOLORBOND® steel colours

LYSAGHT

NOVALINE fascia accessories

(45º not in NSW)

AbbreviationsCB = COLORBOND® colours

on ZINCALUME® steelGB = GALVABOND® steel

unpaintedZL = ZINCALUME® steel

unpainted

Not all NOVALINE fascia accessories are available in all markets. Consult with your local distributor for availability in your region.* Multi purpose fascia bracket can be bent 90º to attach to a wall.

18mm

35mm

185mm

StandardNovaline

RebatedNovaline(WA only)

20mm

37mm

176mm

101mm

32mm

NOVALINE fascia coverLYSAGHT

35

177

NOVALINEfascia cover

Put a bright new surface onto your tired old fascias.

The NOVALINE fascia cover has the ability to cover warped or weathered timber, peeling paint or discoloured wood so the fascia appears smooth and attractive.

NOVALINE fascia covers are designed to go over your existing fascia boards, so all these unattractive problems are totally concealed.

They are compatible with most NOVALINE fascia accessories and will mount the same range of gutters.

AvailabilityVictoria only

FinishesCOLORBOND® steel colours

ProductAvailability

ProductAvailability

ProductAvailability

RebateNOVALINEfascia

NOVALINEfascia


EMLINE gutter

LYSAGHTLL EMLINE®

gutter is concealed-fixed,and is compatible with NOVALINE fascia.

It is available slotted orunslotted.

BMT = 0.42 mm

A range of COLORBOND® coloursis available.

EMLINE capping is available fortrimming roof edges at barges.

LYSAGHT TRIMLL LINE® gutteris concealed-fixed, and iscompatible with NOVALINEfascia. It is available slotted or unslotted. BMT = 0.42 mm. A range of COLORBOND®

colours is available.

Dimensions in NSWA = 73 mm (nominal)B = 117 mm (nominal)C = 124 mm (nominal)

Note: Availability in NSW issubject enquiry.

Dimensions in Victoria &TasmaniaA = 72 mm (nominal)B = 116 mm (nominal)C = 124 mm (nominal)

Dimensions in QldA = 70 mm (nominal)B = 116 mm (nominal) C = 124 mm (nominal)

LYSAGHT

TRIMLINE gutterLYSAGHT

140

mm

89 m

m

125 mm

140

mm

89 m

m

125 mm

A

C

B

Remember

Accessories

Downpipes

Flashings

Fasteners


on ZINCALUME® steelGB = GALVALL BOND® steel


unpainted

TRIMLINE gutter accessories

TRIMLINE capping Overstrap(Not available in NSW) ZLCB & ZL

Stop endCB & ZL

GP internal bracketZL

30mm

124mm

125mm

Capping

EMLINE gutter accessories

Emline capping OverstrapCB & ZL ZL

Stop endCB & ZL

GP internal bracketZL

30mm

140mm

125mm

Capping

ProductAvailability

ProductAvailability

Also available Northern NSW

Rain

wat

er G

oods


SHEERLINE gutter

LYSAGHT SHLL EERLINE® gutteris concealed-fixed, and is available slotted or unslotted. Itis favoured by some, for high-profile roofing (e.g. KLIP-LOK)laid at low pitches. Particularlygood in home improvement applications.BMT = 0.42mm (Vic. & Tas.)TTBMT = 0.50mm (NSW)BMT = 0.55mm (NSW, SA & NT)

Standard and high-gloss COLORBOND® steelcolours are available.

The slotted product is notavailable in Western Australia.

SHEERLINE capping is available for trimmingroof edges at barges.

Dimensions other than inSouth or West AustraliaA = 81 mm (nominal)B = 141 mm (nominal)C = 124 mm (nominal)

Dimensions in South AustraliaA = 72.5 mm (nominal) B = 141 mm (nominal) C = 124 mm (nominal)

Western AustraliaStock lengths are 7 metres, or custom cut lengths up to 8metres.Finishes: COLORBOND® andunpainted ZINCALUME®.A=83mm (nominal)B=140mm (nominal)C=127mm (nominal)

LYSAGHT

A

C

B

SHEERLINE gutter accessories

Capping General purpose bracket SGCI gutter clip ZL & CB ZL ZLNot available in WA

External end stop Internal end stop ZL & CB ZL & CB Fascia style No flutes in WA product Not available in WA Sold in pairs in NSW Sold in pairs in NSW

Remember

Accessories

Downpipes

Flashings

Fasteners




punpainted

(SHEERLINE is notavailable with a return in SA)

Also available:J strap or overstrap; Ext mitre.

These accessories are also suitable for CUSTOM ORB,CUSTOM BLUE ORB, SPANDEK and TRIMDEK.

ProductAvailability


QUAD 150 & 175 guttersLYSAGHT

Quad 150 and 175 are our traditional gutters in two widerprofiles. Quad 150 is compatible with NOVALINE fascia. BMT = 0.42mm.

They are available in COLORBOND® steel colours and unpainted ZINCALUME® steel.

Quad 150A = 75 mm (nominal) B = 74 mm (nominal) C = 150 mm (nominal)Custom cut lengths are availableto 8000 mm.

Quad 175A = 103 mm (nominal)B = 96 mm (nominal) C = 175 mm (nominal)Custom cut lengths are availableto 8000 mm.Available subject to enquiry.

Overstrap Internal corner:Used with all Quad gutters except 175 Pressed steelZL Used with all Quad gutters

GA, ZL & CB

Stop end plate: LH or RHUsed with all Quad guttersZL & CB

Quad gutter accessories

Return stop end: LH or RH Full stop end: LH or RH Used with Hi-front Used with 150, 175 & Lo-front GA, ZL & CB GA, ZL & CB

External corner:Pressed steelUsed with all Quad guttersZL & CB

A

C

B

1 zinger onlyin Quad 175

Remember

Accessories

Downpipes

Flashings

Fasteners




punpainted

Spike bracketUsed with 150 & 175GALVANISED & POWDER COATED

Queensland only

Internal GP bracket Used with all Quad gutters ZL

ProductAvailability

Quad 175Subject to

enquiry

Rain

wat

er G

oods

OGEE gutterLYSAGHT

External corner: diecast Internal corner: diecast OGEE overstrap Internal GP bracket OGEE external bracket Stop end:90 & 45diecast 90 & 45diecast LH or RHPC on diecast & unpainted PC on diecast & unpainted ZL ZL CB CB (Not available in WA)

OGEE gutter accessories

LYSAGHT OGLL EE gutters offera distinctive look for anyhome, and is compatible with NOVALINE fascia.

Available in COLORBOND®


Dimensions in SA and Vic.A = 64 mm (nominal)B = 98 mm (nominal)C = 145 mm (nominal)

LYSAGHT OGLL EE is availableslotted in S.A. .

A

C

B


QUAD 115 gutters: Hi-front (& Lo-front NSW only)

LYSAGHT

Quad 115 is also a traditionalgutter, and is compatible with NOVALINE fascia. Quad 115Hi-front gutter better obscuresthe end of low-to medium-height roofing profiles from view. BMT =0.42 mm. Standard COLORBOND®

STEEL colours are available.

In some states this profile is available slotted to prevent water overflowing into eaves duringheavy rainfall.

In Victoria, Quad 115 Hi-frontis also known simply as Quad gutter. N/A in W.A.

The Queensland Quad 115 Hi-front gutter is fluted.

(Quad 115 is availableslotted in SA & NSW)

Hi-front DimensionsA = 62 mm (nominal)B = 90 mm (nominal)C = 115 mm (nominal)

Lo-front Dimensions (NSW)A = 65 mm (nominal)B = 70 mm (nominal)C = 115 mm (nominal)

Remember

Accessories

Downpipes

Flashings

Fasteners



unpaintedPC = Powder coated steelZL = ZINCALUME® steel

unpainted

External corner:Pressed steelUsed with all Quad guttersZL & CB

Not available in NSW

Quad gutter accessories

Internal (GP) bracket External T- head bracketUsed with all Quad gutters ZINCALUME ZINCALUME & COLORBOND

150 only is available in Qld.

Internal corner: External corner:Diecast 90 & 45 Diecast 90 & 45

COLORBOND COLORBOND

Stop end plate: LH/ RH paiUsed with all Quad guttersZINCALUME & COLORBOND

ProductAvailability

ProductAvailability

OverstrapUsed with all Quad gutters ZINCALUME


Half round gutter is a simple profile, supported by external brackets. Ideal for tropicalenvironments with huge water carrying capacity. Self cleaningwith every shower of rain.Available in ZINCALUME®,COLORBOND® & GALVALL BOND®

steel.A similar product is availablein Nth Qld, S.A. and NSW.

QueenslandAccessories include mitred corners, fixing brackets and stop ends.

Northern TerritoryA segmented Half Roundgutter is available.

Easy fix accessories

bracket

Available subject to enquiry.

In NSW, similar product sizes available are:x = 100, 125, 150, 200, 250, 300mmAvailable in 3000mm and 6000mmlengths only, subject to enquiry.Available in ZINCALUME®

& COLORBOND® steel

HALF-ROUND gutterLYSAGHT

Remember

Accessories

Downpipes

Flashings

Fasteners




unpainted

152 mm x

The curved base on LYSAGHTLLgutter prevents build up of water and dirt, allowing the gutter to clean itself with every shower of rain.A similar product is available in S.A. and NSW subject to enquiry.

Queensland & VictoriaAccessories include mitredcorners, fixing brackets and stopends. Available in ZINCALUME®,COLORBOND® & GALVALL BOND®

steel.


FLAT BACK gutter136 mm

The unique mounting bracketprovides quick, easy solution to roof overhang. Simply drill ahole and fit the gutter using a bracket and approved fastener.

FITFAST gutter accessoriesFFare designed to make installation quick and easy.

QueenslandAccessories include fixingbrackets and stop ends. Available in most standardCOLORBOND® steel colours.


used with FITFAST gutterFF

FITFAST gutterLYSAGHT

20

125

140

69

150 mm

Victoria dimension is 150mmnominal.

Queensland dimensions New South Wales dimensions

SGCI gutter clipZL

ProductAvailability

ProductAvailability

ProductAvailability

Rain

wat

er G

oods

CUSTOM WA guttersLYSAGHT


RANCELINE gutterCOLONIAL gutter

Standard COLORBOND® steelcolours are available. Also available stotted.

LYSAGHT

LYSAGHT

65

90

98

These three gutters are made only in Western Australia.BMT=0.55 mm. They are available in unpainted ZINCALUME®, COLORBOND®

colours, COLORBOND®

STAINLESS, COLORBOND®

METALLIC, copper, aluminium and hard zinc. Maximum length is 8000 mm.




unpainted

6190

90

LYSAGHT Colonial gutter(new wider base)

LYSAGHT Ranceline gutterLYSAGHT Ranceline slottedLYSAGHT Ranceline patio

ProductAvailability

ProductAvailability


Downpipes: Square & rectangular

TasmaniaCustom cut available.

Lengths2400

BMT0.60

FinishZL & CB

Dimensions75 x 5075 x 75

100 x 50100 x 75

100 x 100125 x 100150 x 75

150 x 100

LYSAGHTdownpipes are compatiblewith all gutter sections,including those used with the NOVALINEfascia system.

QueenslandWhole length is

tapered.

Lengths100 x 75:

1600,1800,24002700 & 3000

All other sizes: custom cut

BMT0.400.55

FinishGB, ZL & CB

Dimensions

0.40 BMT100 x 50100 x 75

100 x 100

0.55 BMT100 x 50100 x 75

100 x 100125 x 100150 x 100150 x 150

Other sizes made to order.

WAAvailablein copper,

COLORBOND®,ZINCALUME® &

aluminium.

Lengths1800 & 2400

BMT0.40 & 0.55

FinishZL & CB

Dimensions75 x 5095 x 45

100 x 50100 x 75


SA & NT

Lengths1800

BMT0.400.55

FinishGB, ZL & CB(Some sizes available in

CB Ultra)

Dimensions50 x 5075 x 5075 x 75

100 x 50100 x 75

100 x 100100 x 125100 x 150

NSW

Lengths1800 & 2400

BMT0.40 & 0.55

FinishZL & CB

BMT & Dimensions

0.40 BMT100 x 50100 x 75

0.55 BMT100 x 100

Other sizes available on

request.Contact local

branch for availability.

Victoria

Lengths1800 & 2400

FinishCB: 0.55

ZL & GB:0.40 & 0.55

BMT & Dimensions

0.40 BMT75 x 5075 x 75100 x 50100 x 75

0.55 BMT100 x 100150 x 100144 x 144150 x 150

Downpipes

Finish ZL ZL ZL & CB GB , ZL & CB ZL ZL

PopsAlso known as nozzles in New South Wales and drops in Queensland.

NSW100 x 50100 x 75100 x 100

Victoria75 x 5075 x 75100 x 50100 x 75100 x 100150 x 100150 x 100144 x 144150 x 150

QueenslandUniversal100 x 50100 x 75

100 x 100125 x 100150 x 100150 x 150


SA & NT50 x 5075 x 5075 x 75

100 x 50100 x 75

100 x 100125 x 100150 x 100

Specify loose or fitted to gutter

WA75 x 5095 x 45

100 x 50100 x 75


Tasmania75 x 50

100 x 50100 x 75

100 x 100125 x 100150 x 100




unpainted

ProductAvailability

ProductAvailability

Rain

wat

er G

oods


Elbows (95°) & Shoes (45°)Also known as bends in New South Wales and Queensland

NSWRefer Service

Offer

FinishRefer Service

Offer

Vic.100 x 50100 x 75

100 x 100

FinishZL, GB & CB

Qld100 x 50100 x 75

100 x 100Other sizes

made to order.

FinishZL & CB

SA & NT50 x 5075 x 5075 x 75

100 x 50100 x 75

100 x 100

Specify loose or fitted to gutter

75mm dia. tosuit PVC also

available.

FinishGB, ZL & CB

WA75 x 5095 x 45100 x 50

FinishZL & CB

Tas.75 x 50

100 x 50100 x 75

100 x 100125 x 100150 x 100

FinishZL & CB

StrapsAlso known as astragals in New South Wales and South Australia, clips in Victoria and saddle straps in Western Australia.The sizes available are the same as those shown for pops.In Victoria and Western Australia, additional sizes are available on request.

Downpipe offsets (2 piece)NSW

100 x 50100 x 75

FinishZL & CB

Vic.100 x 50100 x 75

100 x 100

FinishZL, GB & CB

Qld100 x 50100 x 75

Nominate 450 or 600 mm

eaves

FinishZL & CB

SA & NTAvailable as 2 piece

50 x 5050 x 7575 x 75

100 x 50100 x 75

100 x 100125 x 100150 x 100

FinishGB, ZL & CB

POA IN S.A..

WAAvailable

Tas.Not available

95

135

45

Elbow

Shoe

AdjustableRemember

Accessories

Downpipes

Flashings

Fasteners




unpainted

Adjustable Length300-645mm(345 adjustment)

ProductAvailability


Downpipes: RoundDownpipes

Tas.Custom cutavailable.

Lengths1800

BMT0.60

FinishZL & GB

DimensionsDiameter

5075

100125150

WA

LengthsFor all

diameters: 1800 tapered

75 diameter: 1800, 2400crimped

BMTFor all

diameters: 0.4075-& above: 0.40 & 0.55

Dimensions & finish

Diameter&finish50 GB60 GB

75 ZL & GB100 ZL & GB125 ZL & GB150 ZL & GBAsk for non-

standard.

Vic.

Lengths1800 & 2400

FinishZL & CB

Dimensions &BMT

0.40 BMTDiameter

50657590

0.55 BMT100125150175200225250275300

NSW

Lengths1800 & 2400

FinishZL & CB

DimensionsDiameter

7590100

Other diameters subject to enquiry.

Qld: TaperedWhole length

is tapered.

Lengths75 to 100 dia:1800 & 2400

125 to 150 dia:1800

BMT75 to 100 dia:

0.40100 to 150 dia:

0.55

FinishZL, GB & CB

DimensionsDiameter

7590100125150

Queensland:ParallelLengths

900

FinishCB

Dimensions(dia.) & BMT75 dia: 0.4090 dia: 0.40

100 dia: 0.40100 dia: 0.55125 dia: 0.55150 dia: 0.55

Other diameters made to order in

0.55 BMT.TT

SA & NT

Lengths1800

BMT0.40 & 0.55

Dimensions & finish

Diameter & finish

50 GB, ZL & CB75 GB, ZL & CB90 GB, ZL & CB

100 GB, ZL & CB

125 GB, ZL & CB

150 GB, ZL & CB

(Some sizes available in

CB Ultra) Remember

Accessories

Downpipes

Flashings

Fasteners




unpainted

ProductAvailability

Rain

wat

er G

oods


Pops/Nozzles/Drops

NSWDiameter (mm)

7590100

Universal nozzles also available in

NSW to suit 100 x 75mm

or 100 x 90mm.

Finish

ZL

VictoriaDiameter (mm)

50657590100125150200

FinishZL & GB

QueenslandDiameter (mm)

Universal7590

100125150

FinishZL & CB

SA & NTDiameter (mm)

50-75-90100-125-150

Specify loose or fitted to gutter.

Limited colours.

FinishGB, ZL, CB

WADiameter (mm)

50-65-70100

Overflows: 25 mm dia.x 100 longGB only

Ask for non-standard.

FinishZL

TasmaniaDiameter (mm)

50-75100-150

FinishZL

Elbows (95°) & Shoes (45°)Also known as bends in New South Wales and Queensland

NSWRefer to NSWService Offer.

VictoriaDiameter

50657590100

FinishZL, GB & CB

QueenslandDiameter

7590

100125150


FinishZL, GB & CB

SA & NTDiameter

5065 (not SA)

7590 (pressed

bend diecast)100125

150 (not NT)

Limited colours.

FinishCB, ZL & GB

WADiameter

75


FinishZL & GB

TasmaniaDiameter

5075

100125150

FinishZL & GB

StrapsAlso known as astragals in New South Wales and South Australia, clips in Victoria and saddle straps in WA.The sizes available are the same as those shown for pops.In Victoria there is also a 170mm diameter clip.In Western Australia 75mm strapping is used (1800mm lengths).

More downpipe accessories on next page

95

135

45

Elbow

Shoe

ProductAvailability

LLYSAGHT Product Catalogue – 2010 Edition 33

Crimped bend 90 & 45 degreesNSW

Diameter7590

100

Subject toenquiry.

FinishZL & CB

Standoff bracketsSA

Diameter75-90-100125-150

unpainted

WA & NSWDiameter75 -100

Galvanised onlyNon-standard

subject to enquiry.

Chinamans hatNSW

Diameter(On short pipe)

150175200225250300350400

FinishGB

QueenslandDiameter

(On short pipe)7590

100125150175200225250300

FinishZL, GB & CB

WADiameterKnown as

cap with strap100150200

FinishGB

Downpipe offsets (2 piece).VictoriaDiameter

657590

100

FinishZL, GB & CB

NSWRefer NSW

Service Offerfor details.

FinishRefer NSW

Service Offerfor details.

WADiameter

75

FinishZL, GB & CB

SADiameter

(On short pipe)Made to order

75-100-125150-300

Other sizesavailable on

request.

FinishGB & CB

Adjustable

Remember

Accessories

Downpipes

Flashings

Fasteners




unpainted

QueenslandDiameter

5075

Other sizesmade to order.

FinishZL & CB

450mm 450mm

150mm diameterNominate roof pitch

Available in COLORBOND®

& ZINCALUME®

WA Flumes with base

Adjustable Length450-600mm (150mmadjustment)

SADiameter50-75-90

100-125-150POA in S.A.

FinishZL, GB & CB

ProductAvailability

ProductAvailability

Rain

wat

er G

oods


NSW

BMT0.55

Materials

coating

Dimensions2400 x 1200

Vic.

BMT0.55


1800 x 12002400 x 900

2400 x 1200

Qld

BMT0.40 & 0.55

Materials


SA & NT

BMT0.55

Materials

DimensionsTo order

WA

BMT

Materials


Tas.

BMT0.55

coatingAQUAPLATE


Accessory sheet

Materials Dimensions &lengths

0.4 x 25 &0.4 x 38

1800 & 2400

0.6 x 25 &0.6 x 38

1800 & 2400

0.8 x 252400

1.0 x 252400

NSW25 x 1.0 x 100m

32 x 1.0 x 100m32 x 1.2 x 100m32 x 1.6 x 100m

38 x 1.2 x 50m

51 x 1.6 x 25m

Vic.32 x 1.2 x 100m

38 x 1.2 x 100m38 x 1.6 x 100m

Qld30 x 1.0 x 30m

32 x 1.2 x 50m32 x 1.2 x 25m

51 x 1.6 x 25m

SA25 x 0.6 x 100m51 x 1.6 x 25m

NT25 x 0.6

51 x 1.6 x 25m

Tas.25 x 1.025 x 1.225 x 1.6

32 x 1.232 x 1.6

38 x 1.238 x 1.6

51 x 1.6

Flat strips (hoop iron)

Strapping (coils)

ProductAvailability

ProductAvailability

ProductAvailability


Silicone sealantColours

Neutral cure.Sizes

Soft zinc flashingThickness

0.7 mmLength Widths

Tools (turn-up/turn-down) & notching toolsNot all tools

are available in all areas. Refer

to your local service office

for availability.

CUSTOM ORB INTEGRITY 820

Turn down

KLIP-LOK 406

Turn down

KLIP-LOK 700 HS

Turn down

LONGLINE 305

SPANDEK

TRIMDEK

Turn down

AbbreviationsCB = ®

on ®

CU

GB = ®

SS

ZL = ®

ProductAvailability

ProductAvailability

ProductAvailability

Acc

esso

ries


Ventilated ridges

NSW

Materials

Throat sizes

300350400450500550600

Vic

Materials

Throat sizes150225300

Stop ends

Closed top

Open top

Qld

Materials

Throat sizes

made to 900 mm

made to 600 mm

MX series

TC series

Stop ends

SA & NT

Materials

Throat sizes125150200250300350450600

Stop ends

WA

MaterialsULTRA

& SS

Throat sizes

& 600

Standard

Ranceline

Options

Tasmania

Materials

Throat sizes125150225300

Stop ends

WA ventilator ridges

LouvresAvailable Material Finish

Powdercoating

ULTRA

SizesRound

340 mm dia620 mm dia

SizesHalf-round

900 x 500

SizesOctagonal620 mm dia

Square & Rectangular

in SA

Ridge capping

Apron flashing Bird wire

Throat size

Standard Ranceline

ProductAvailability

ProductAvailability


Box gutter bracketsVic & NSW

Construction

Materials

Width

Qld

Construction

Materials

Width

including:

SA & NT

Materials

Width

WACalled

Materials

WidthSmall: 250–400

Large: +650–1000

Box gutter sumpsVic & NSW

Materials

Size

order

Qld

Materials

Sizes

order

200 x 200300 x 300400 x 400450 x 450500 x 500550 x 550600 x 600

SA & NT

Materials

Sizes

WA

Materials

Sizes250 x 250 x 100300 x 225 x 225300 x 300 x 250375 x 225 x 225375 x 225 x 225450 x 300 x 300600 x 600 x 100

Box gutter expansion jointsQld, WA &

NSW

Materials

Lengths

Over 400mm

Adjustable

Sizes:350/400400/650

650/1000

43

300

Angle to suit roofpitch


on ®

CU

GB = ®

SS

ZL = ®

ProductAvailability

ProductAvailability

Acc

esso

ries


Rainwater headsNSW

Refer to the Service Offer

for details.

Vic

Materials

Sizes

order

Qld

Materials

Sizes

order

Round rainwater

made to order

Contact SA branch for

details on the full rainwater head range.

SA & NT

Materials

WA

Materials

Sizes

Flat bottom300 x 750 x 150375 x 225 x 225600 x 300 x 300

Tapered bottom250 x 200300 x 200400 x 250450 x 300600 x 450

W

D

L

WD

L

D

Transitions, roof collars & overflowsQueensland

Materials

Sizes

order

WD

L

D

W

D

L

W

D

L

W

D

L

W

L

D

AntiqueRainhead

Tapered ClassicRainhead

ClassicRainhead

Tapered BushrangerRainhead

BushrangerRainhead

Tulip Rainhead

Half Moon Rainhead

Quarter Moon Rainhead

Full Moon Rainhead

OrnamentalRainhead

ProductAvailability

ProductAvailability


Fixed metal louvresQueensland

NSW and W.A.

Materials

Sizes

NSW & WA:

to order.

Translucent sheeting (Contact local branch for availability)

Materials

2

2 2

ColoursPolycarbonate

Fibreglass &

LengthsPolycarbonate

Fibreglass900 to 12200

Fastening

®

®

(WA only, 770 mm wide)


on ®

CU

GB = ®

SS

ZL = ®

ProductAvailability

ProductAvailability

Weatherlok washers

Lapseal Width5075100

Thickness6 mm

Length

Diameter2032

Acc

esso

ries


®

Ant capsQld

Materials

Sizes square200 x 200225 x 225250 x 250300 x 300

Sizes round200 diameter 250 diameter300 diameter

WA

Materials

Sizes

100 x 100225 x 225

Roof infill strips (closed cell type) and

Length915915760

406 810700HS 730

770820 890

roll roll

Width

20

Dektite® pipe flashings

CUSTOM ORB profile shownWidth

& WA

and

ProductAvailability

ProductAvailability

ProductAvailability

Complies with AS4389:1996

Mesh100 x 115 x 1.25

Roll width1800

Roll length

Roll area90 m2

in SA

Mesh150 x 150 x 1.6

Roll width1800

Roll length

Roll area90 m2

Mesh150 x 300 x 2

Roll width1800

Roll length

Roll area90 m2

Mesh150 x 300 x 3.15

Roll width900

Roll length

Roll area54 m2


Safety mesh

Ventilators: Industrial & DomesticWind-drivenventilators

to region. Enquire on

centre.

MaterialAluminium

Finish

®

Throatdiameters

diameter in mm

Options

controlled

ProductAvailability

ProductAvailability

Acc

esso

ries

Fasteners: Screw to steel–AS3566 Class 4 (except as noted)

Coating Class 4Gauge TPI Length (mm)

Self drilling screw for thin gauge steel (with underwasher thread) with seal

13 13 4113 13 5515 15 55

Hex. head Self drilling screw with seal (part thread)

14 10 4214 10 5014 10 65

Stitching screws Hex. head with seal

10 12 20

Hex. head with 19 mm aluminium bonded washer

14 10 4214 10 5014 10 65

Zinc platedGauge TPI Length

Wafer head10 16 1610 16 22

Hex. head, no seal

8 18 1210 16 16

Coating Class 3 coatedGauge TPI Length

Wafer head

10 16 1610 16 22

Ripple Teks®

10 16 2010 16 30

® ®

Coating Class 4 Gauge TPI Length (mm)

Roofzips® Hex. head self drilling screw for steel (with underwasher thread) with seal

Hex. head self drilling screw for steel (with underwasher thread) with seal

12 14 3512 14 4512 14 68

Hex. head self drilling screw for steel (with underwasher thread) with seal (full thread)

10 16 1612 14 2014 10 42

Hex. head, no seal

10 16 1610 16 2512 14 5512 14 6512 14 7514 20 2214 10 2514 10 4214 10 50

Hex. head with 19mmaluminium bonded washer14 10 4214 10 5014 10 65

Self drilling screw with 19mmaluminium bonded washer

15 15 47

®

ProductAvailability


Across flats Length

Hexagon sockets

Across flats Length

Phillips drive bits#2 50

Length

Magnetic bit holder75

Fastener drive tools

Fasteners: Screw to timber

Coating class 3 coatedGauge TPI Length

Hex. head with thread under washer with seal

12 11 5012 11 65

Hex. headwith seal (full thread)

10 12 2512 11 2514 10 25

Hex. head withseal (part thread)

12 11 4514 10 5014 10 65

Hex. headno seal (full thread)

10 12 2512 10 2514 10 25

Hex. head, noseal (part thread)

12 11 4512 11 5014 10 5014 10 65

®


Roofzips® Hex. head Self drilling screw for steel or timber (with underwasher thread) with seal

Hex. head with thread under washer with seal

12 11 65

Hex. head with seal

12 11 2514 10 2514 10 5014 10 6514 10 7514 10 90

Hex. head, no seal (N/A in Queensland)

12 11 2514 10 2514 10 5014 10 65

Hex. head with 16 mmaluminium bonded washer

14 10 5014 10 65


14 10 5014 10 65


14 10 5014 10 65

®

Zinc platedGauge TPI Length

Wafer head

10 12 2510 12 45

Countersunk head (N/A in Queensland)

6 18 25

Bugle head batten

14 10 7514 10 100

ProductAvailability


Acc

esso

ries

44 Edition

Fasteners: Cyclonic assemblies–Screw to steel


For CUSTOM ORB14 10 42

For SPANDEK & TRIMDEK14 10 50

For KLIP-LOK 406 HIGH WIND14 10 65


Metal Batten Teks®

for CUSTOM ORB15 15 47

Metal Batten Teks®

for SPANDEK & TRIMDEK15 15 55

Metal Batten Teks®

for KLIP-LOK 406 HIGH WIND15 15 47

Coating class 3 or 4 coatedGauge TPI Length

KLIP-LOK-700HS clip fixed to steel (0.75 - 1.0mm)12 14 20

KLIP-LOK-700HS clip fixed to steel (1.0 - 3.0mm)12 14 20

Coating class 3 or 4 coatedGauge TPI Length

KLIP-LOK-700HS clip fixed to timber - Type 17

Hex. Head


Hex. head forCUSTOM ORB

Hex. head forSPANDEK & TRIMDEK

Hex. head forKLIP-LOK 406 HIGH WIND

Fasteners: Nails to timberGalvanised spiral-threaded steel nail

Fasteners: Blind rivets

Body Mandrel Dia. Grip Type Head

Fasteners: Cyclonic assemblies–Screw to timber

For fixing without cyclonic assemblies, see LYSAGHT Cyclonic Design Manual. Cyclonic assemblies are available in WA, NT and Qld.

ProductAvailability

ProductAvailability

ProductAvailability



LightweightPlain facing1350 x 20 m (27 m2

1350 x 60 m (81 m2

Anti-glare facing1350 x 20 m (27 m2

1350 x 30 m (40.5 m2

1350 x 60 m (81 m2

Building grade–Anti-glare1350 x 20 m (27 m2

1350 x 60 m (81 m2

HeavyweightPlain facing1350 x 20 m (27 m2

1200 x 60 m (72 m2

1350 x 60 m (81 m2


1350 x 30 m (40.5 m2

1350 x 60 m (81 m2

Perforated1350 x 60 m (81 m2

Gladiator wallwrap1350 x 60 m (81 m2

Thermotuff wallwrap1350 x 60 m (81 m2

MediumweightPlain facing1350 x 20 m (27 m2

1200 x 60 m (72 m2

1350 x 60 m (81 m2


1350 x 30 m (40.5 m2

1350 x 60 m (81 m2

Perforated1350 x 60 m (81 m2

Sisaltuff1350 x 60 m (81 m2

Insulation: Foil Tape2

2

2

2

2

2

2

2

2

2

Lightweight foil facingR1.5 1200 x 15 m (18 m2

R1.5 1200 x 20 m (24 m2

R2.0 1200 x 10 m (12 m2

R2.0 1200 x 15 m (18 m2

R2.5 1200 x 10 m (12 m2

Mediumweight foil facingR1.5 1200 x 15 m (18 m2

R1.5 1200 x 20 m (24 m2

R2.0 1200 x 10 m (12 m2

R2.0 1200 x 15 m (18 m2

R2.5 1200 x 10 m (12 m2

Heavyweight foil facingR1.5 1200 x 15 m (18 m2

R1.5 1200 x 20 m (24 m2

R2.0 1200 x 10 m (12 m2

R2.0 1200 x 15 m (18 m2

R2.5 1200 x 10 m (12 m2

R2.5 1200 x 7.5 m (9 m2

LightweightR1.2 1200 x 15 m (18 m2

R1.2 1200 x 20 m (24 m2

R1.2 1200 x 30 m (36 m2

R1.8 1200 x 10 m (12 m2

R1.8 1200 x 15 m (18 m2

R1.8 1200 x 20 m (24 m2

R2.3 1200 x 10 m (12 m2

75 mm 1200 x 20 m (24 m2

MediumweightR1.5 1200 x 15 m (18 m2

R1.5 1200 x 20 m (24 m2

R2.0 1200 x 10 m (12 m2

R2.0 1200 x 15 m (18 m2

R2.5 1200 x 10 m (12 m2

HeavyweightR1.5 1200 x 15 m (18 m2

R1.5 1200 x 20 m (24 m2

R2.0 1200 x 10 m (12 m2

R2.0 1200 x 15 m (18 m2

R2.5 1200 x 10 m (12 m2

R2.5 1200 x 7.5 m (9 m2

Insulation: Reflective foil laminate

Insulation: Building blanket with foil

Insulation: Building blanket

Insulation: Ceiling batts

Insulation: Wall batts

ProductAvailability


Acc

esso

ries

ZEDS & CEES (Purlins & Girts) F

Lt

D

L

E B

LL

t

LYSAGHT

Above 100 size, the standard product offer is a LYSAGHTSUPAPURLIN in NSW, SA and South East Qld.Z/C30024 -Z/C40030 are available subject to enquiry in WA & NT.Z/C15010, Z/C15012, Z/C15015, Z/C20012, Z/C 25015 and Z/C30019 subject to enquiry in SA.Z/C400 sizes are only available in Queensland and are subject to enquiry and extended lead times.

LYSAGHT Zed and Cee sections are accurately roll-formed from high-strength zinc-coated steel to provide an efficient, lightweight, economical roofing and cladding support system for framed structures.

The system includes HOOK-LOK™ ll bridging, Series 300 and 350 bridging and a wide range of accessories. It is supplied ready for erection.

Material specificationsLYSAGHT Zed and Cee sections are roll-formed from GALVASPAN® steel complying with AS1397—2001. In the grades shown, the number prefixed with G indicates minimum yield stress in MPa; and the number prefixed with Z indicates minimum coating mass in g/m2.

request.

for C/Z10010 sections. Refer to local supplier.

PunchingZed and Cee sections are normally supplied with holes punched to the Australian Steel Institute(ASI) gauge lines, except in Victoria where the 150 series sections are punched to the gauge lines of the Structural SteelFabricators Association, Victoria.

Dimensions of Zeds & Cees

ProductAvailability

ProductAvailability

Z/C100 purlin Z/C purlins

75

38

1212

1.0

Available in South Australia only. Supplied unpunched.

SA Cee sectionLYSAGHT

ProductAvailability

46 LYSAGHT Product Catalogue – 2010 Edition Edition


SUPAPURLINS

SUPAPURLINS PRODUCT RANGE

LYSAGHT

LYSAGHT SUPAPURLINS® arethe new purlin profiles that give you higher capacities and more economical solutions.

has patented SUPAZEDS® and SUPACEES®

because it is the first significant development in the field for a very long time.

SUPAZEDs and SUPACEEs areonly available in New South Wales, South Australia and S.E. Queensland as a standard product offer. Other areas are subject to enquiry.

Available in NT from SAmanufacturing site with a two week lead time.

t c u d o r P h t p e D ) m m (

s s e n k c i h T ) m m (

t l o B s t n e m e r i u q e R

e p a h S n i l r u P e m a N d n a

g n i g d i r B m e t s y S

21MedarG

8.8ro6.4

g n i g d i r B h t i w m e t s y S

/ p m a l c s d n e r o t a c o l

d e t l o b r o t e k c a r b

s d n e

0 1 0 5 1 C S / Z S 2 1 0 5 1 C S / Z S 5 1 0 5 1 C S / Z S 9 1 0 5 1 C S / Z S 4 2 0 5 1 C S / Z S

2 5 1

0 . 1 2 . 1 5 . 1 9 . 1 4 . 2

2 1 0 0 2 C S / Z S 5 1 0 0 2 C S / Z S 9 1 0 0 2 C S / Z S 4 2 0 0 2 C S / Z S

3 0 2

2 . 1 5 . 1 9 . 1 4 . 2

5 1 0 5 2 C S / Z S 9 1 0 5 2 C S / Z S 4 2 0 5 2 C S / Z S

4

4

5 2 5 . 1 9 . 1 4 . 2

9 1 0 0 3 C S / Z S 4 2 0 0 3 C S / Z S 0 3 0 0 3 C S / Z S

0 0

0 0

39 . 1 4 . 2 0 . 3

edarG61M8.8ro6.4

4*2 0 5 3 C S / Z S 0*

0

0

3 0 5 3 C S / Z S

4**4

4

2 0 C S / Z S

2**3 0 C S / Z S 04 0**3 0 C S / Z S

0 5 3 4 . 2 0 . 3

4 . 2 0 . 3 2 . 3

3. Queensland and South Australia are able to manufacture downturned lipped purlins, subject to enquiry. Consult your local BlueScope Lysaght Service Centre for advice. Extended lead times may apply.

1. Purlins marked * availability is subject to enquiry. Consult your local BlueScope Lysaght Service Centre for advice. Extended lead times may apply.2. Purlins marked ** are available in Qld and SA only. Consult your local BlueScope Lysaght Service Centre for advice. Extended lead times may apply.

LYSAGHTSeries

300-350bridging

Details onapplication

SUPAZEDS

SUPACEES

LYSAGHTHOOK-LOK II

Purlin Product CodingThe coding of the purlin products consists of prefix letters followed by a series of numbers.The prefix letters are for the various purlin shapes and

SZ = LYSAGHT SUPAZED®

shapeSC = LYSAGHT SUPACEE®

shape

The letter prefix is then followed by a three digit number indicating the section nominal depth in millimetres (not the actual depth). Thus the nominal depths would be 150, 200, 250, 300, 350 or 400.

This is then followed by a two digit number designating section thickness. This would

For example SZ20012designates a LYSAGHTSUPAZED® 200 millimetres

Where reference is made to both purlin shapes of the same size then designation such as SZ/SC is used, similarly for other shapes.

ProductAvailability

Stru

ctur

al P

rodu

cts

Non-Standard purlin options (Subject to enquiry in Qld)

Non-Standard purlin options are available subject to enquiry. These non-standard options are available on special projects only and will be subject to minimum order quantities and extended lead times.

LYSAGHT SUPAZEDS and SUPACEES are accurately roll-formed from high-strength zinc-coated steel to provide an efficient, lightweight, economical roofing and cladding support system for framed structures.

The system includes HOOK-LOK™ IILYSAGHTand a wide range of accessories. It is supplied ready for erection.

Available in NT from manufacturing site in SAwith a two week lead time.

Made in Qld, NSW and SA.

DIMENSIONS OF SUPAZEDS AND SUPACEESF

D

LF

E

LE

t

D

B

LB

t

rounded off to the nearest 0.5mm.

ProductAvailability

Dimensions of SupaZeds and SupaCees

Product Code Mass per unit SupaZeds/SupaCees Code Length (kg/m)

t DSZ15010/ SC15010 57.5 1.0 2.38SZ15012/ SC15012 1.2 152 2.89SZ15015/ SC15015 1.5 152 3.58SZ15019/SC15019 1.9 152 4.51SZ15024/ SC15024 2.4 152 5.67

SZ20012/SC20012 1.2 203 3.62SZ20015/ SC20015 1.5 203 4.49SZ20019/ SC20019 1.9 203 5.73SZ20024/ SC20024 2.4 203 7.20

SZ25015/ SC25015 1.5 254 5.16SZ25019/SC25019 1.9 254 6.50SZ25024/ SC25024 2.4 254 8.16

SZ30019/ SC30019 1.9 300 8.02SZ30024/ SC30024 2.4 300 10.09SZ30030/ SC30030 3.0 300 12.56

SZ35024/ SC35024 2.4 350 12.20SZ35030/SC35030 3.0 350 15.19

SZ40024/ SC40024 2.4 400 13.15SZ40030/ SC40030 3.0 400 16.45

Available in Victoriavia Metalform.



The holes punched in the webs are located at the accepted industry standard gauge lines. The gauge lines are as detailed below and the holes are equally spaced above and below the centreline of the purlin.

Purlin Gauge line (G)Nominal Size (mm)

100 40

200 110250 160300 210350 260400 (Qld/SA only) 310

HOLE GAUGE LINES

Purlin AccessoriesThere is a range of LYSAGHTaccessories available for use with the LYSAGHT purlins. Theseaccessories are an integral part of the LYSAGHT purlinand girt system. All LYSAGHTaccessories are zinc-coated steel.

Purlin bolts

both the head and nut shall be used for all types of connections described in this manual as required by AS/NZS 4600, Clause 5.3.1

NOTE: GPB300

Queensland. Please contact your local service centre.

M12 sizeLYSAGHT standard purlin

with nut.LYSAGHT high-

M12 x 30 mm with nut.

M16 sizeLYSAGHT standard

M16 x 45 mm with nut (Grade 8.8 available

subject to enquiry.)

1 1 1 1 1 1Product Code

A1

B1

C1

D1

E1

F1

6 holes18 mm diameter

3535

General purpose bracket

ProductAvailability

ProductAvailability

Stru

ctur

al P

rodu

cts

Angle connectorsThe angle connectors are detailed to allow connections of sections of the same size or one size smaller.

Clamp platesUsed in conjunction with angle connectors and racking girt bracket to allow connections to the lips of Cee purlins.

Racking Girt Bracket

The Racking Girt

ends of the C10015 Racking

supplied formed at right angles, as shown, and is formed on-site by the erector to the correct angle to suit to roof slope.

Other accessoriesThere are other accessories that may be available subject to enquiry, and these may be subject to minimum order quantities and extended lead times.These other accessories may

and grades)

Racking GirtThe racking girt is simply a C10015 purlin profile. Theracking girt bracket has been dimensioned to suit this girt.

shaped for fascia application

turned bottom lip

70

25

70

90 mm for Product Code AC100140 mm for Product Code AC150

NOTE: PAC300 is available in Qld. Please contact your local service centre.

70

35

35

18

35 40

15

70

70

70 50

70240

190

Product Code

AC100AC150

Product Code

AC200

Product Code

AC250

54

25

B

18

A25

Product CodeCP100

CP150 140 15CP200 190 15CP250 240 40

90

185

135

40 7025

40

25

18

102

51

13.5

Also comes in 100mm size.

Also comes in 150, 200 and 250 mm sizes.

ProductAvailability



LYSAGHT HOOK-LOK® II Bridging members - Typical component combinations

P channelC

clampend

Llocator

endStandard bridge(clamp/locator)

Standard bridge(bolted) P channel

Bbracket

end

Bbracket

end

FIX

ED

LE

NG

TH

D channel

Fbracket

end

Bbracket

end

Cclampend

Llocator

end

Adjustablefascia bridge

AD

JUS

TA

BL

EL

EN

GT

H

Adjustablebridge

Expansion joint/ridge tie

Girt foot

Pivot end bridgingfor curved roof

Tie rod

Turnbuckle/ridge tie

Girt hanger

Bbracket

end

Cclampend

Llocator

end

Bbracket

end

Cclampend

Llocator

end

S c

hann

el

Bbracket

endC

clampend

Llocator

end

T turnbuckle

TTu

rnbu

ckle

B bracket end

C clamp end

L locator end

B bracket end

C clamp end

L locator end

Bbracket end

Bbracket end

Cclampend

Bbracket

end

Cclampend

L locatorend

Bbracket

end

Cclampend

Llocator

end

Bbracket

end

Bbracket end

Cclampend

Llocator

end

S channel

S c

hann

el

Gbracket end

†

†

†

†

P channel

† †

† clinched connection

L locatorend

bolt connection

D channel

TTu

rnbu

ckle

T turnbuckle Bbracket end

Cclampend

Bbracket

end

Cclampend

L locatorend

L locatorend

Bbracket

endC

clampend

Llocator

end

†

either clinched or bolt connection

S channel

S channel

B bracket end

C clamp end

L locator end

Other

Girt bridging options

OR

OR

HOOK-LOK II Bridging - Minimum lengths (mm)*Purlin Depth

Bridging member 100 150 200 250Standard C-L ends 240 200 200 200Standard bolted 450 450 200 200Girt hangers 450 450 450 450Girt foot 300 300 300 300Turnbuckle ridge tie 500 500 500 500Adjustable bridging 500 500 500 500Tie rod 200 200 200 200

ProductAvailability

Stru

ctur

al P

rodu

cts

How to specify HOOK-LOK IIpartsPads of LYSAGHT HOOK-LOK IIorder forms are available from your local representative.

When specifying HOOK-LOK II

1. Specify the HOOK-LOK IIprefix H2.

2. Specify left hand end component – always three characters (e.g. C20)

3. Specify the type of bridging channel – always one character (e.g. P)

4. Specify right hand end component – three characters (e.g. L20)

Putting these together, you would

Example 1An adjustable bridging, with clamp to suit a C15015 purlin at one end and a bolted bracket to suit a C20024 purlin at the other

(This assumes that the order was not for use in Victoriawhere the product code would

to Product codes table.)

Example 2Fascia bridging, to span between a C20024 used as a fascia purlin

H2 F20 D L20.

Product codes for HOOK-LOK II parts

Clamp endCODE C

Locator endCODE L

FasciabracketsCODE F

BoltedbracketsCODE B

TurnbuckleCODE T

Tie rodCODE R

Bridgingchannel:

plainCODE P

Bridgingchannel:slotted

CODE S

Bridgingchannel:double

CODE D

Girt bracketCODE G

Mark No.

C10C15C1V*C20C25

L10L15L1V*L20L25

F20F25

Mark No.

B10B15

B20B25

T10†T12†

R12†R16†

Mark No.

P

S

D

G

* For Victoria, 150 size bridging is specified using a 'V' instead of the '5'† 10,12 or 16 refer to rod diameter in mm

This is a bridging system used with the larger 300 and 350 sections.

The components consist of a C15015 or SC15015 channel and bridging ends assembled with LYSAGHT high strength M12 x 30mm purlin bolts.

All components are galvanised for long life and can be assembled using the recommended bolts.

When ordering, the overall bridging length should be specified, i.e. purlin or girt spacing, less 3mm.

Catalogue numbers for this

Series 300 and 350 bridging systemLYSAGHT

ProductAvailability

ProductAvailability



Fascia Purlin FP23019

One-piece fascias are easy solutions to the needs

of buildings with bigger portal fame spacings.

The FP23019 purlin is roll-formed, from higher tensile steel than the FP26015, and

is stronger.

PunchingFP23019 purlins are

normally supplied punched. FP26015 are normally

not punched, but can be punched if ordered.

Fascia Purlin FP26015Dimensions vary from state to state. Not standard. Used with Z or C250.

Not available in Vic. or WA. Subject to enquiry in NSW.

Associated purlin products

Varies to suit roof slope.Specify when ordering.120° max, 84 min.

20

34 min.

10

Holes 22 x 18

30

230

6511

0

1.950

95

5

Registered designNo. 100252

Varies to suit roof slope.Specify when ordering.120 max, 84 min.

20

30

260

1.560

130

5

160

50

Holes 22 x 18

Dimensions vary from state to state. Contact your local service centre for details of fascia purlin range.Subject to enquiry in WA.

Nominateanglerequired.

ProductAvailability

ProductAvailability

FasciaPurlinFP23019

Fascia PurlinFP26105

ProductAvailability

In WA, order C15019, C20019 or C25019 purlin and

nominate angle required to match roof slope.

Stru

ctur

al P

rodu

cts


LYSAGHT TOPSPAN® lightstructural sections are the economical alternative to timber battens. They are lighter than timber and frequently used for roofing, sheds and garages.

Storage, carrying and handling of TOPSPAN sections are easier, because they nest together. There is no need to cut to length because the sections can be lapped.

Material

enquire at your local sales office.

TOPSPAN 61

0.75, 1.00Length

75006100 (W.A. only)

TOPSPAN 96

0.75, 1.001.20

Length7500

TOPSPAN 120

0.70, 0.901.00

Custom cut to length

TOPSPAN light steel sectionsLYSAGHT

75

32

40

1490

42

40

15

63

29

22

11.5 619

28

22

117

32

96

14102.5

36.5

61

14149

40

120

22

ProductAvailability

See notesfor product.

Associated top hat productsTOPSPAN 50

0.75‡Length

75006100 (W.A. only)

‡Used in cyclonic areas

88

25

50

20

In SA, an alternative roof batten and ceiling batten are available. Please refer to your local office for details.

TOPSPAN 22*

0.42Length

6100

TOPSPAN 22 Qld

0.42Length

6100

TOPSPAN 40

0.55, 0.75‡Length

7500‡Used in cyclonic areas

TOPSPAN 40 Vic

0.55Length

6000



Structural steel decksLYSAGHT

a family of structural steel decks for a broad range of applications - LYSAGHTW-DEK®, LYSAGHT ®

and LYSAGHT POWERDEK®.

This table compares the LYSAGHT decks with each other to highlight where they are best utilised.

Cover Depth BMT Slab thickness UnproppedProfile(mm) (mm) (mm) minimum (mm) Span (mm)

590 54 0.6

0.75 90 up to 3400 1.0

700 78 0.75 130 up to 4100 1.0

300 1001.0

140 up to 5200

1.2

1.5

300 1201.2

160 up to 6000 1.5

depthcover

cover

depth

Cover

Depth

BONDEK

LYSAGHT W-DEK

POWERDEK (Available subject to enquiry)

Comparisons of spans, concrete displacement, fire performance and other important criteria are included here.

This data is the result of full scale testing, analysis and design comparisons at our NATA-registered laboratory and associated academic research centres.

strengths of each product, the specifier can choose the one most suitable for the job.

Stru

ctur

al P

rodu

cts

BONDEK

590 mm cover

54 mm

® is a formwork and bottom reinforcement system for concrete slab construction, suitable for domestic and major building projects. Itis more economical than conventional formwork, fast to install, and allows easy fixing of ceilings and services. Structurally, replaces usual bottom reinforcement.

Base materials and coating mass

LengthsCustom cut lengths from 1200 to 17,000 mm. NoteQld maximum length 10,000 mm.

Dimensions Depth = 54 mm Cover Width = 590 mm

Mass2

2

2

2

Tolerances

Finishes

Standard is Galvanised Z350. ®, a pre-

painted underside, can be made to special order.

BONDEK accessories

LYSAGHT

BonfillPolystyrene foam stops concreteand air entering ends of ribs.Stock length: 1200mmRequired: 300mm per sheet of BONDEK.

BonwedgeLightweight bracket for rodsto suspend ceilings or services(other than fire sprinkler systems).Max. load: 100 kg

End plug Polyethylene end plug stops concrete and air from entering end of BONDEK ribs.

Bon-nutHeavy duty square nut tosuspend ceilings or services.Glued to a paper strip it makes insertion easy.Threads: M8, M10 and M12. M6 is available for light loads only (2.7 kN or less)

21.5

8.5

BONDEK Safe loadBMT (kN)0.75 4.41.00 6.7

Post tensioning clipAllows BONDEK composite slabsto be post-tensioned.

SealingTapeTape is used to seal gapsto prevent leakage ofwet concrete.

BonstripPlastic trim to covergaps formed by ribs.Used when underside ofBONDEK forms an exposed ceiling.Stock length: 3000 mm. Allows Gyprock® to be fixed to BONDEK.

EDGEFORMA galvanised section that creates a permanent formwork atthe slab edges—cut, mitred and screwed on site.

ProductAvailability



cover

depth

W-DEK

LYSAGHT W-DEK is an economical, versatile, robust formwork and flooring system. It can also be used to reduce bottom reinforcement in concrete slabs.

It is particularly useful in steel framed buildings, widely acknowledged as the future of multi-storey building construction, but is not limited to these composite concrete slab systems.


Lengths

Custom cut lengths from 1000mm to 14000mm

Mass

2

2

Dimensions Depth = 78mm Cover Width = 700mm

Tolerances

Finishes

Hot dipped zinc coated high tensile steels - G550, Z350 grade to AS1397.

LYSAGHT

Cover

Depth

POWERDEK (Subject to enquiry)

LYSAGHT POWERDEK willrevolutionise how you design with concrete slabs. LYSAGHT POWERDEK gives you significantly increased unpropped spans (up to 6.0m) and substantially increased load carrying capacities.

A positive interlocking rib provides a strong, secure

the profiles are encased in concrete, they have exceptional

fire performance, with no extra reinforcement required for up to a 3 hour fire rating.

LYSAGHT POWERDEK steeldecking profiles have sufficient shear bond capacity for imposed loads 30 kPa and more.

Available subject to enquiry.Extended lead times and minimum order quantities apply. Refer to your local service centre for details.


Lengths(Custom cut lengths up to 10m.)

MassPOWERDEK 100 1.0 18.56kg/m2

POWERDEK 100 1.2 22.14kg/m2




Tolerances

FinishesHot dipped zinc coated Z275

LYSAGHTDimensions Depth = 100 or 120 mm Cover Width = 300 mm POWERDEK® 100 depth = 100mm POWERDEK® 120 depth = 120mm

Brackets from builder’s strapping.

ProductAvailability

ProductAvailability

Project based by enquiry only.

Stru

ctur

al P

rodu

cts

Cold-formed Sections: Standard

LYSAGHT cold-formed sections

angles, plain channels and lipped channels. They have many uses in the construction, general fabrication and home handyperson fields. Subject to enquiry in Qld & NSW.

Materials

G300, Z275 (300 MPa minimum yield stress, 275 g/m2 minimum

coating mass).

AS 1594 HU300 (300 MPa minimum yield stress).

Lengths

Custom made lengths on application.

Non standard lengths of will come in the same pack sizes as

the standard lengths.

Angles

Plain channels

Lipped channels

LYSAGHT ProductAvailability

Availability in NSW is subject to enquiry.

Product Code Size BMT Mass Uncoated Zincform LA 4630 46 x 35 3.0 1.79 Yes Yes LA 5130 51 x 30 3.0 1.79 Yes N/A

Product Code Size BMT Mass Uncoated Zincform LC 05130 51 x 25 3.0 2.15 Yes Yes LC 07630 76 x 38 3.0 3.34 Yes Yes LC 08330 83 x 34 3.0 3.34 Yes Yes LC 08930 89 x 31 3.0 3.34 Yes Yes LC 09530 95 x 37 3.0 3.70 Yes Yes LC 10330 103 x 34 3.0 3.70 Yes Yes LC 10230 102 x 55 3.0 4.77 Yes Yes LC 12730 127 x 50 3.0 5.24 Yes Yes

Product Code Size BMT Mass Uncoated Zincform LC 15230 152 x 51 3.0 5.84 Yes Yes LL 10230 102 x 51 3.0 5.24 Yes Yes LL 12730 152 x 64 3.0 5.84 Yes Yes LL 15230 152 x 64 3.0 7.15 Yes Yes LL 20330 203 x 76 3.0 9.06 Yes Yes LL 25430 254 x 89 3.0 10.83 Yes Yes

HANDY-C systemThe HANDY-C® system takes the place of timber supports for roof and wall cladding in lightweight structures. It comes complete with channels, cleats, bracing and self-drilling screws.

Parts

HANDY C cleat is available separately in NSW.

head 14 - 10 x 20

(Fastening of cleat to purlin supplied by customer to suit purlin.)

LYSAGHTProduct

Availability



INTERLOK II

INTERLOK II steel grating is an innovative and economical interlocking grating system that is suitable for a wide range of applications such as racking, shelving, walkways, catwalks, platforms, ramps and decking.

There are male-male and male-female planks, as well as joining and installation accessories.

DimensionsThe basic ‘plank’ is nominally 225mm wide x 65mm high, and is available in either anti-skid (raised ‘teeth’ on bars) or plain.

LengthsStock length = 6075mm.

Lengths from 497mm to 10800mm can be made to special order, in rib width multiples. Lengthsless than 6075mm incur an extra cutting charge.

Catalogue number & BMT

MaterialZinc-coated steel to AS1397, G300, Z450 (300 MPaminimum yield stress, 450-g/m2

minimum coating mass).

Heavy duty Extra heavy duty

INTERLOK II stair treads are made from INTERLOK G06520with welded carrier plates. The extra heavy duty treads have a floor plate nosing. Theyare quick and easy to install.

Not available in W.A.

Catalogue Lengthnumber (mm)

HP0024 2400

HP0027 2700 ‡

HP0030 3000

HP0040 4000

HP0050 5000

HP0060 6000

225

HANDIPLANK lapping bracket

(Not available in NSW)

HANDIPLANK is a universal steel plank with a skid resistant surface, suitable for many jobs around the home or light commercial applications. Theymeet the load requirements of AS1577—1993. Width is 225mm.

Male-male plank Male-female plank

65 m

m

65 m

m

225 mm(nominal)

225 mm(nominal)

LYSAGHT

INTERLOK II stair treadsLYSAGHT

HANDIPLANKLYSAGHT

CatalogueProduct Number

Heel/toe side plate G170S

Heel/toe end plate G170E

Filler panel G065FP

Carrier plate G056CP

End plate G065EP

Splice plateG065SP

Hold down clip G065HDC

Accessories

ProductAvailability

ProductAvailability

ProductAvailability

INTERLOKstair treads

‡ Not avialable in NSW

Stru

ctur

al P

rodu

cts


SUPRATRUSS COMPONENTS

LYSAGHT SUPRATRUSS® is an engineered roof framing system made accurately from high tensile steel. Steel trusses don’t rot, shrink or burn, and termites don’t eat them.

BlueScope Lysaght does not design and fabricate trusses - we can refer you to an alternative supplier if required.

The following sections are available in these standard lengths and pack sizes. For minimum order quantities, please contact your nearest service centre.

SUPRATRUSS chord BMT (mm) Section Stocked lengths* Pack sizes

0.6 75 x 38 7500 50

SUPRATRUSS web(Not available in NSW)

BMT(mm) Section Stocked lengths* Pack sizes

0.75 51 x 28 Made to order 50

Boxed rafter BMT(mm) Section Stocked lengths* Pack sizes

0.48 70 x 38 Made to order 50

0.48 75 x 38 7500 50

0.48 90 x 38 7500 40

Universal bracket 70

Universal bracket 140

Pack size

100

Pack size

40

LYSAGHT

* Non-standard lengths: 1800mm minimum,

12000mm maximum (7500mm maximum in NSW)

ProductAvailability


SUPRAFRAME COMPONENTS

LYSAGHT SUPRAFRAME® is an engineered wall framing system made accurately from high tensile steel. Steel walls don’t rot, shrink or burn, and termites don’t eat them.

BlueScope Lysaght does not design and fabricate trusses - we can refer you to an alternative supplier if required.

Boxed stud BMT (mm) Section Stocked lengths* Pack sizes

0.48 70 x 38 2408, 2443, 2708, 2743, 7500 50

0.48 75 x 38 Made to order* 50

0.48 90 x 38 2408, 2443, 2708, 2743, 7500 40

Open stud BMT (mm) Section Stocked lengths* Pack sizes

0.55 75 x 38 2408, 2443, 2708, 2743, 7500 60

0.55 ‡ 70 x 38 Made to order* 60

0.75 75 x 38 Made to order* 60

0.55 ‡ 90 x 38 Made to order* 60

0.75 ‡ 90 x 38 Made to order* 60

‡ Not available in NSW

Plate BMT (mm) Section Stocked lengths* Pack sizes

0.75 70 x 35 7500 50

0.75 70 x 65 7500 50

1.0 70 x 65 7500 50

0.75 75 x 35 7500 50

0.75 75 x 65 7500 50

1.0 75 x 65 7500 50

0.75 90 x 35 7500 50

1.0 90 x 65 7500 50

LYSAGHT

* Non-standard lengths: 1800mm minimum,

12000mm maximum, 7500mm maximum in NSW

ProductAvailability

Hou

se F

ram

ing


Nogging

Lintel

Trim angle

Nogging clipPack size 900

Tensioner setPack size 100

Brick tieGalvanised steel Pack size 500Stainless steel‡ Pack size 500

A different style is available in SA. ‡Not available in NSW

Plumbing grommetPack size 2000

Electrical grommetPack size 2000

BMT Section Stocked lengths Pack sizes0.48 20 x 22 6100 20

BMT Section Stocked lengths Pack sizes1.0 200 x 35 6000 251.5 200 x 35 6000 25

BMT Section Stocked lengths Pack sizes1.0 35 x 35 4800 401.0 35 x 35 5800 40

Round washer32-mm x 2.5 with 6-mm hole. Galvanised steel.

Pack size 500

ProductAvailability


Steel building frame (SBF) components

SMARTRUSS®

This is a system of components that can be used for fabrication into wall, roof and floor frames. The members are strong, accurate, light and stable, and lend themselves to fast assembly.

Steel frames won’t warp, twist, shrink, rot, or split, and are termite and fire proof.

MaterialWith the exception of the cyclonic stud, the components of this system are made from G300ZINCALUME® or GALVABOND®

steel that is easily weldable.

AvailabilityAsk your local BlueScope Lysaght office about product availability in your area.

The SMARTRUSS system is

comprised of:

®

®

®

AvailabilityAsk your local BlueScopeLysaght office about product availability in your area.

Made in NT and Nth Qld.

LYSAGHT

LYSAGHT

ProductAvailability

Truss top chord

Top plate

Nogging

Concrete slab

Cross bracing

Common stud

Lintel

HeadSill

Jamb studs

Bottomplate

Truss web

Truss bottom chord

Floor bearer

Floor joist

ProductAvailability

Hou

se F

ram

ing


QUIKA-FLOOR

QUIKA-FLOOR® is a flooring system primarily used for domestic applications. It uses steel columns with steel floor bearers and joists which may be chosen from the profiles shown on this page.

FIRMLOK®, in COLORBOND®

steel or ZINCALUME® finishis usually used in verandahs, carports and patios.

There are QUIKA-FLOOR®

publications for design and spanning information.

Sub-floor bracingWhere sub-floor bracing is req. a 50 x 50 x 2.5 DURAGAL® angleis recommended although flat strapping may also be used.

Accessories

x 1.5 x 3600

QUIKA-BEARER brackets

QUIKA-BEARERS/JOISTS

Material to AS 1397 as follows:

BMT Steel grade1.9, 2.4 G450, Z3502.5 G300, Z275

Code No. D W t

QFPC10019U 102 51 1.9QFPC15019U 152 64 1.9QFPC15024U 152 64 2.4QFPC20019U 203 76 1.9QFPC20024U 203 76 2.4QFLL12025Z 120 55 2.5

QUIKA-JOIST

Material to AS 1397 G550, AZ150

Code No.

QFTSJ12090NS 0.9QFTSJ12010NS 1.0

FIRMLOK BEARERS/JOISTS

Material to AS 1397 G550, AZ150

Code No. D W t

FL10011ZLNS 100 47 0.55FL15015ZLNS 150 47 0.75FL20020ZLNS 200 47 1.0

LYSAGHT

W

D

t

40

120

149

t

W

Dt

ProductAvailability

Fencing: Non-cyclonicLYSAGHT fences are attractive, economical, versatile and durable. Andthey’re easy to install.

There are four ranges of fences: NEETASCREEN®,SMARTASCREEN®,CUSTOMSCREEN® andMINISCREEN®. When they are supplied with a lattice panel they are called NEETASCREEN PLUS, SMARTASCREEN PLUS, CUSTOMSCREEN PLUS and MINISCREEN PLUS.

CUSTOMSCREEN /CUSTOMSCREEN PLUS isavailable in Queensland and South Australia only.

All fence types are complemented by our range of gates, designed to harmonise perfectly. The gates are available with optional high quality handles and key-operable locks.

HeightsNominal heights of fences are 1200, 1500, 1800 and 2100mm from top of top rail to bottom of bottom rail. (1200mm height is not available in NSW.) Thebottom rail should be nominally 50mm above ground level.

ColoursAsk for the current range of COLORBOND® steel fencecolours.

SelectionUse our selection and installation guide to determine your needs.

NEETASCREEN NEETASCREEN PLUS NEETASCREEN PLUS WITH GATE (n/a in WA)

LYSAGHT

SMARTASCREEN SMARTASCREEN PLUS SMARTASCREEN WITH GATE (n/a in WA)

MINISCREEN MINISCREEN PLUS MINISCREEN WITH GATE (Subject to enquiry in SA) (Subject to enquiry in SA) (Subject to enquiry in SA) (n/a in

WA)

CUSTOMSCREEN CUSTOMSCREEN PLUS(Available in SA and Qld only) (Available in SA and Qld only)

Gates are available for CUSTOMSRCEEN and CUSTOMSCREEN PLUS fences, but no photo.


Fenc

es


1200

84

43

53

60

48

60

25

38

29

Posts Standard lengths 2100, 2400, 2700 & 3000mm (and 1800mm available in S.E. Qld)

Infill sheets Standard lengths 1490, 1790 & 2090mmNEETASCREENrange

†Rails Standard lengths 815, 1575, 2350 & 3100mm for SMARTASCREEN & NEETASCREEN840, 1585, 2350 & 3100mm for MINISCREEN840, 1605, 2370 AND 3100mm FOR CUSTOMSCREEN

Post caps

Fasteners

MINISCREEN universal rail

CUSTOMSCREEN universal rail

LYSAGHTpost cap

(cut with knifeto get single caps)

Ball cap Ripple Tek® screw10—16 x 20(MINISCREEN range only)

Self-drilling, self tapping hex. washer-head screws10—16 x 16 (All fence types)12—14 x 45 (Fence Type 3 and extra wide gate)

PostcoverstripStandardlength2400mm

(Used as top & bottomrail & middle rail forNEETASCREEN PLUS &SMARTASCREEN PLUS)(38 x 38 x 1.2 in SA)

(Used as top & bottomrail & middle rail forMINISCREEN PLUS)

(Used as top & bottomrail & middle rail forCUSTOMSCREEN PLUS)(38 x 25 x 1.6 in SA)

MINISCREENrange

616

38

60

Standardpost

Insert cap(for square post)

Post

s

Post

s

Post

s

NEETASCREENSMARTASCREEN &CUSTOMSCREEN

NEETASCREEN PLUSSMARTASCREEN PLUS &CUSTOMSCREEN PLUS

MINISCREEN MINISCREEN PLUS

Univers

al rail

Infill sheetInfill sheet(NEETASCREENshown) Infill sheet

Ballcap

Post

s

Lattice

Centre rail

Centre rail

Lysaghtpost cap Lysaght

post cap

Ballcap

Standardpoststiffener(Fence Types2 & 3)

Self-drilling, self tappinglong drill bit hex. head screw12—24 x 32 (Fence Types 2 & 3)

LatticeStandard length 2350 mmNEETASCREEN PLUSMINISCREEN PLUS

300

nom

inal

Univers

al rai

l

Universal

rail

Universa

l rail

Universa

l rail

Universal

rail

Universal

rail

Universal

rail

Universal

rail

Lattice

Universa

l rail

MINISCREEN centre rail(38 x 25mm)

Square postCorner junctions &

single gates 60 x 60 x 1.6(50 x 50 x 1.6 in SA)

Extra wide gates65 x 65 x 2.5

Length 2400 & 3000mm

28

SMARTASCREENrange

Infill sheet(NEETASCREENshown)

SMARTASCREEN & NEETASCREEN

universal rail

CUSTOMSCREENrange

†

ProductAvailability

ProductAvailability

ProductAvailability

ProductAvailability

CUSTOMSCREENNEETASCREENMINISCREEN

SMARTASCREEN

In NT, non-cyclonic fences are only available south of Katherine.

MANDALAY™ fence

Fencing: Cyclonic & High Wind Conditions

LYSAGHT

LYSAGHTLYSAGHT cyclonic fences are based on our well respected NEETASCREEN fences.

There is one family: NEETASCREEN and NEETASCREEN PLUS (the latter is topped with a lattice panel). There are two configurations. NEETALOK® is specifically designed for use in wind region D.

NEETASCREEN is available in Qld & NT only, NEETALOK® is only available in WA.

HeightsNominal heights of fences are 1500 and 1800 mm from top of top rail to bottom of bottom rail. Thebottom rail should be nominally 50 mm above ground level.

ColoursAsk for the current range of COLORBOND® steel colours.

SelectionUse our selection and installation guide to determine your needs.

ProductAvailability

ProductAvailability

MANDALAY™ fence utilises LYSAGHT universal posts and rails - slats can be retrofitted to give an existing fence a modern face-lift.Available in 1200mm, 1500mm and 1800mm full fencing heights and a 300mm size to place at the top of a traditional COLORBOND steel fence as a decorative feature.More cost effective than powder-coated aluminium and more durable than timber.Requires minimal maintenance and no painting – just a regular wash down.


Fenc

es


CYCLONIC FENCE OPTIONSLYSAGHT

NEETASCREEN TYPE 3 FENCE

LYSAGHT post cap

NEETALOK FENCE

NEETASCREENstandard postStandard lengths:2100, 2400, 2700

& 3000 mm

Infill sheet Standard lengths: 1490, 1790, 2090 mm BMT 0.42

NEETALOKbrackets

Stiffeners(1200 mm long)

NEETASCREEN PLUS TYPE 3 FENCE

Lysaght post cap (cut in half)

Domed cap

Square post (optional at

corner junctions) Minimum 60 x 60 x 1.6

Domed cap

Self-drilling, self tapping hex. washer-head screws

10—16 x 25 12—14 x 45

NEETASCREEN universal rail Standard length 2350 mm (2 places)

Rectangular post 100 x 50 mm

2.0, 2.5, 3.5 mm BMT Standard lengths:

2400, 2700 & 3000 mm

Infill sheet Standard lengths: 1490, 1790, 2090 mm BMT 0.35

NEETASCREEN standard posts Standard lengths:

2100, 2400, 2700 & 3000 mm

NEETASCREEN universal railStandard length 1575 mm(2 places)



Domed cap

NEETASCREEN standard posts Standard lengths:

2100, 2400, 2700 & 3000 mm

Stiffeners(1200 mm long)

NEETASCREEN universal railStandard length 1575 mm(3 places)

LatticeStandard length 1575 mm

Infill sheet Standard lengths: 1490, 1790, 2090 mm BMT 0.35 Self-drilling, self tapping

hex. washer-head screws 10—16 x 16 12—14 x 45

Self-drilling, self tapping long drill bit hex. head screw

12—24 x 32



Domed cap

Self-drilling, self tapping hex. washer-head screws

10—16 x 16 12—14 x 45

Self-drilling, self tapping long drill bit hex. head screw

12—24 x 32

NEETALOKraking

adaptors

Ball cap

ProductAvailability

GATE OPTIONSLYSAGHT gates are quick and easy to install. Theyare designed to fit perfectly with the NEETASCREEN®,SMARTASCREEN®,CUSTOMSCREEN® andMINISCREEN® range of fences.

There are a range of options to choose from.

The gates are ordered by specifying:

1. Single width or double gate

2. Specify colour & height of gate stiles, rail & infill sheet

3. Standard width or extra wide

4. Specify accessory kit

(External Accessory Kit in Qld)

5. If lattice required (Plus fence) specify colour

6. Specify optional extras if required

Gate widths for NEETASCREEN,SMARTASCREEN & CUSTOMSCREEN

Single gates: 885 mm

Extra-wide gates: 1645 mm

Two extra-wide gates are needed for a typical driveway

NEETASCREEN fences can be reduced in width by increments of 190 mm.

SMARTASCREEN FENCES can be reduced in width by increments of 128 mm.

CUSTOMSCREEN fences can be reduced in width by increments of 76 mm.

MINISCREEN

Single gates: 910 mm

Extra-wide single gates: 1655mm

Two extra-wide single gates are needed for a typical driveway. MINISCREEN fences can be reduced in width by increments of 25 mm.

Not available in W.A.

NEETASCREEN, SMARTASCREEN & CUSTOMSCREEN gate options (NEETASCREEN shown)

LYSAGHT

Stile

Bottom rail

Top rail

Stile

Infil

l she

et

Stile

Bottom rail

Top railSt

ile

SINGLE GATE EXTRA-WIDE SINGLE GATE

Infil

l she

et

Infil

l she

et

PremiumGate Accessory Kita) Single Gate Accessory kit (GK5):Lokk-Latch Pro set (key, lock both sides)HandleHinge (black)Accessory Screws (black #10-24x16 Wafer Heads)Stile Caps (plug type)b) Double Gate Accessory Supplement Kit (GK4):Hinge (black)Accessory Screws (standard #10-24x16 Wafer Heads)Stile Caps (plug type)Drop Bolt (zinc)

Extras:Infill SheetLattice-short (815 Neeta & Smarta, 840 Custom, 905 Mini)Lattice-long (1575 Neeta & Smarta, 1604 Custom,1675 Mini)

Optional Extras:Tubular Gate Post + Cap (60x60)Tubular Gate Post + Cap (65x65)Drop Bolt (zinc)Edge Cover Strip (additional for lattice &/or Infill sheet)Screws (#12-14x45 Hex Heads)

Gate Accessory Kit - Contents

a] Single Gate Accessory kit (GK1):Locking set - D-latch with extension handle + striker, (zinc)Hinge (zinc)Striker Cover (anti-rattle)Accessory Screws (standard #10-24x16 Wafer Heads)Stile Caps (plug type)b] Double Gate Accessory Supplement Kit (GK2):Hinge (zinc)Accessory Screws (standard #10-24x16 Wafer Heads)Stile Caps (plug type)Drop Bolt (zinc)Standard Gate Accessory Kit:a] Single Gate Accessory kit (GK3):Lokk-Latch set (key, lock one side)HandleHinge (black)Accessory Screws (black #10-24x16 Wafer Heads)Stile Caps (plug type)b] Double Gate Accessory Supplement Kit (GK4):Hinge (black)Accessory Screws (standard #10-24x16 Wafer Heads)Stile Caps (plug type)Drop Bolt (zinc)

Quantity of items in each kit depends upon whether it is a single, double or extra-wide gate, and if it has a lattice (Plus). Check with your local distributor for specified quantities for your requirement.

Economy Gate Accessory Kit:

SMARTASCREEN gate illustrated above.

ProductAvailability


Fenc

es

Infil

l she

et

Stile

Bottom rail

Top rail

Latt

ice

Lower top rail

Infil

l she

et

Stile

Bottom rail

Top rail

Latt

ice

Lower top rail

Infil

l she

et

SINGLE GATE

Latticegateclip

Latticegateclip

EXTRA-WIDE SINGLE GATE

NEETASCREEN PLUS & SMARTASCREEN PLUS gate options (NEETASCREEN shown)

Stile

Infil

l she

et

Stile

Stile

cov

er

Stile

cov

er

Bottom rail

Centre rail

& clip

Stile

Infil

l she

et

Stile

cov

er

Bottom rail

Stile

Stile

cov

er

Centre rail

& clip

SINGLE GATE

Top rail

Latt

ice

Lower top rail

Top rail

Latt

ice

Lower top rail

Latticegateclip

Latticegateclip

EXTRA-WIDE SINGLE GATE

MINISCREEN Plus gate kit

MINISCREEN gate kit

Stile

Infil

l she

et

Stile

Stile

cov

er

Stile

cov

er

Bottom rail

Top rail

Centrerail

& clip

Stile

Infil

l she

et

Stile

cov

er

Bottom rail

Top rail

Stile

Stile

cov

er

Centrerail

& clip

SINGLE GATE EXTRA-WIDE SINGLE GATE

There are additional options available for latches, handles, hinges and locks in the Economy, Standard and PremiumAccessories packs. CUSTOMSCREEN/ CUSTOMSCREEN PLUS (not illustrated) is available in SA and Qld only.

ProductAvailability


LYSAGHT HOME IMPROVEMENTS

When you invest in a LYSAGHT Living Collection® addition for your home, you are assured of building with materials engineered and tested to Australian Standards. Available in a range of architectural styles and modern colours to complement your home, the LYSAGHT Living Collection® features strong and sturdy steel components from Australia’s largest steel manufacturer – BlueScope Steel. Style and design flexibility is central to the LYSAGHT Living Collection®, which has been created as a complete system. All of the designs can be combined into a format that will

suit your home, lifestyle and budget. Matching gutters and downpipes provide a complete package that will enhance the elegant appearance of your extension.Available as freestanding units or attached to the home, create a personal outdoor living space that will enrich your home and outdoor family entertaining area.Designs have been focussed on low maintenance, durability, wind resistance, security and privacy – they are also fire, rot and termite resistant. No matter what you’re looking for, a LYSAGHT Living Collection® patio or carport is the ideal addition to your home.

The LYSAGHT Living Collection®

is engineered and tested to Australian Standards and developed for maximum aesthetic appearance and structural performance.

Ask about availability and distributor opportunities in your area with your local LYSAGHTrepresentative.

LYSAGHT Home Improvements: Patios, Extensions & Carports

Sit back, relax and enjoy a whole new dimension to your home and enhance your lifestyle with the LYSAGHT Living Collection®

range of Patios, Extensions and Carports.

ProductAvailability

Availability in Nth Qld subject to enquiry.


Hom

e Im

prov

emen

t


LYSAGHT

LYSAGHT FLATDEK® is designed to provide a long-span with an attractive ceiling or internal flush finish. It is particularly useful for awning, carport and similar structures.

The unique dovetail rib can be easily fitted by hand.

Receiver channel foam is 50mm x 20mm. Available in 2m lengths.

Base materialsSteel grade: G550 Coating: AZ150 BMT: 0.42mm

LengthsLengths are custom cut. Check maximum and minimum with your supplier.




Foam infillsFoam infills and strips are available for sealing the receiver channel. For more information, refer brochure.

FinishesA range of COLORBOND® steelcolours, refer to your local stockist for colour selection available. Also available in Hi-Gloss finish on underside.


Made in NSW & SA.

FLATDEK

250mm cover

45mm

LYSAGHT FLATDEK II is a long double span cladding making it particularly well suited to many types of home improvement projects like room additions, carports and awnings.

The underside of FLATDEK IIfeatures clean uninterrupted lines, with an attractive gloss finish. Fixing methods are easy and save time. FLATDEK II combines all the aesthetic benefits of FLATDEK,with the additional benefit of faster installation and fewer laps.

The unique overlapping dovetail ribs of the FLATDEK II profile can be easily fitted together by hand.Receiver channel foam is 50mm x 10 mm. Available in 5 m lengths.

Base materialsSteel grade: G550 Coating: AZ150 BMT: 0.42mm

LengthsLengths are custom cut. Maximum length 8000mmMinimum length 850mm




FinishesA range of COLORBOND® steelcolours, refer to your local stockist for colour selection available. Also available in Hi-Gloss finish on underside.


Made in Qld

FLATDEK IILYSAGHT

620 mm cover

FLATDEK II 45Product

Availability

ProductAvailability

FIRMLOK

LYSAGHT FIRMLOK® beam is a light, strong structural beam, and universal in its applications. It is developed for maximum aesthetic and structural performance. The unique interlocking Cee profiles provide a universal structural member with excellent spanning capacity and torsional resistance once fixed into position.

IdentificationThe format of the number code is:

F D t xxx xx

F=Firmlok xxx = Section xx = 2t x 10 depth D (mm) (mm)Eg: F15015 = FIRMLOK beam with depth of 150mm and 2t thickness of 15 = .75mm BMT

FinishesFIRMLOK beams are available in ZINCALUME® steel and several high gloss colours in COLORBOND® steel.

FIRMLOK universal brackets are also available powder coated to match COLORBOND® steel colours.

The apex bracket is available in galvanised only.

Base materials

Steel grade: G550Coating: AZ150BMT: 0.55, 0.75 & 1.00 mm.

LengthsStock lengths of FIRMLOKbeams are 4000, 5000, 6100, 7500 and 9000 mm. (Not all lengths are available in all centres. See your local service centre for avialbility.) Extended lead times may apply for non-standard lengths between 1,200 mm & 9,000 mm.

TolerancesDepth = ± 1 mm

Width = ± 1 mm

Length = + 0, -5 mm

LYSAGHT FIRMLOK beams are commonly used with FLATDEK/FLATDEK ll for carports, verandahs and patios.

Made in NSW and SA

FIRMLOK brackets

LYSAGHT

50 (nom.)

50 (nom.)

50 (nom.)

FL10011

FL15015

FL20020

NominalD = 100

NominalW = 50

NominalW = 50

NominalW = 50

F100 F150 F200

t

NominalD = 150

NominalD = 200

2t

tt

2t

2t

Universal brackets for different pitches0 to 5º 15º 22.5º

Apex bracketavailable for

15º and 22.5º pitches

Collar tie bracket

Column insertFIRMLOK FLSB

ProductAvailability


Hom

e Im

prov

emen

t


PATIO POSTLYSAGHTThe LYSAGHT PATIO POST isan attractive, fluted aluminium extrusion designed principally for use with FIRMLOK as a verandah post.

There is a matching die-cast foot which is easily fastened to a concrete slab or timber deck.

ColoursThere is a range of high gloss, powder coated COLORBONDcolours.

Stock lengths2400 & 3000 mm

SHS sections Consult your local branch regarding the availability of SHS sections from 60 x 60 to 90 x 90.

67 mmsquare

Patio post

Patio post foot

ProductAvailability

HEAD OPTION 1

HEAD OPTION 2

TWO10 – 16 x 16self-drillingscrews eachside of the

post into thepost-top

insert 20 mm

TWO10 – 16 x 16self-drillingscrews eachside of the

post into thepost-top

insert

WEB

www.lysaght.com

product brochures

TECHNICAL CALL CENTRE

engineers and other building professionals

RESEARCH & DEVELOPMENT

via your local Lysaght Service Centre or technical representative

Service & Support


Hom

e Im

prov

emen

t

Aaccessory sheet 34ant caps 40

Bbatts, insulation 45beams

FIRMLOK 73blanket insulation. See insulationblind rivets. See fastenersBONDEK 56BONDEK accessories 56box gutter

brackets 37expansion joints 37sumps 37

bridgingHOOK-LOK II 51Series 300 & 350 52

bullnose order form 4

Ccappings

non-standard 21standard 18

ceesSA C-purlin 46purlins & girts 46

chinamans hat 33claddings

general notes 1roof

CUSTOM BLUE ORB 2CUSTOM ORB 2INTEGRITY 820 5KLIP-LOK 700HS 6KLIP-LOK 406 7 LONGLINE 305 8SPANDEK 9SPANRIB 9TRIMDEK 10

wallEASYCLAD 11EASYCLAD EH300 12MINI ORB 13 MULTICLAD 12PANELRIB 14TRIMWALL 14WALLCLAD 15Weatherboard 15

collars 38Colonial gutter 28compatibility of materials 1crimped bend 33

curved flashings 3CUSTOM BLUE ORB 2

bullnose order form 4CUSTOM ORB 2

DDEKTITE pipe flashings 40downpipe offsets

round 33square & rectangular 30

downpipesround 31square & rectangular 29

drops (pops)round 32square & rectangular 29

EEASYCLAD 13EASYCLAD EH300 14EASYCLAD trims 13elbows


EMLINE gutter 23enquiries i

Ffascia, NOVALINE 22fascia purlins 53fastener drive tools 43fasteners

blind rivets 44cyclonic assemblies

screw to steel 44screw to timber 44

nails to timber 44screw to steel 42screw to timber 43

fencingcyclonic 67MANDALAY 67gate options 69non-cyclonic 65

FIRMLOK 73FITFAST gutters 27flashing

DEKTITE 40soft zinc 35

flashingscurved 3New South Wales 18non-standard 21

Northern Territory 20Queensland 19South Australia 20standard 18Tasmania 18Victoria 19Western Australia 20

flat strips 34FLATDEK 72FLATDEK II 72formwork. See BONDEK, W-DEK, POWERDEK

Ggate options 69girts, zeds & cees 46gutter

box, brackets 37COLONIAL 28EMLINE 23Flat Back 27Half-round 27LYSAGHT OGEE 26Quad 150 & 175 24RANCELINE 28SHEERLINE 24TRIMLINE 23W.A. miscellaneous 28

gutter accessories. See under gutter namesgutters, non-standard 21

HHalf-round gutter 27HANDIPLANK 59HANDY-C system 58HOOK-LOK II bridging system 51hoop iron 34house framing

QUIKA-FLOOR 64steel building frame (SBF) 63SUPRAFRAME 61SUPRATRUSS 60SMARTRUSS 63

Iincompatible materials 1infill strips, roof profiles 40insulation

building blanket 45building blanket with foil 45ceiling batts 45reflective foil laminate 45foil tape 45wall batts 45

INTEGRITY 820 5INTERLOK II 59

stair treads 59


KKLIP-LOK 700 HIGH STRENGTH 6KLIP-LOK 406 7 KLIP-LOK MAXIMA 8KLIP-LOK accessories 6, 7, 8

LLapseal 39light steel sections

TOPSPAN 54LONGLINE 305 9LONGLINE 305 Tapered 9louvres 36

MMaintenance (Cladding & RWG) 78 MANDALAY™ fence 67MAXIMA see KLIP-LOK MAXIMA 8mesh, safety 41MINI ORB 15MINI ORB trims 15MINISCREEN fences 65MULTICLAD 14

Nnails. See fastenersNEETASCREEN fences 65NOVALINE fascia system 22NOVALINE fascia cover 22nozzles


OOGEE (LYSAGHT OGEE) gutter 26overflows 38

PPANELRIB 16Patio post 74pop rivets. See fastenerspops


posts 74POWERDEK 57purlins 46. See also bridging

QQuad 115 (Hi & Lo front) gutter 26 Quad 150 & 175 gutter 25QUIKA-FLOOR 64

Rrainwater heads 38RANCELINE gutter 28roof collars 38roof infill strips 40ROOFTRAK 12

Ssafety mesh 41screws. See fastenersSeries 300 & 350 bridging 52SHEERLINE gutter 24sheeting

accessory 34translucent 39

shoesround 32square & rectangular 30

silicone sealant 35soft zinc flashing 35SMARTRUSS 63 SPANDEK 10SPANRIB 10stair treads 59standoff brackets

round 33steel building frame (SBF) 63strapping 34straps


sumps, box gutter 37SUPACEE 47SUPRAFRAME 61SUPAPURLINS 47SUPRATRUSS 60SUPAZED 47

Ttools

fastener drive 43turn-up & turn down 35

TOPSPAN 54transitions 38translucent sheeting 39TRIMDEK 11TRIMLINE gutter 23TRIMWALL 16

U universal nozzle 30

Vventilated ridges 36ventilators

domestic & industrial 41

WLYSAGHT W-DEK 57WALLCLAD 17WEATHERLOK washers 38Weatherboard 17Warranty (Cladding & RWG) 79

Zzeds & cees

(See also SUPAZEDS, SUPACEES)accessories 46

zeds, purlins & girts 46zinc flashing 35

LYSAGHT Product Catalogue – 2010 Edition 77 Inde

x


These pages provide some basic information on recommended maintenance of LYSAGHT® roofing and residential rainwarer systems.

For full maintenance duty, which forms part of our warranty terms and conditions, refer to the current LYSAGHT Maintenance Handbook, which is available at www.lysaght.com.

1. Access & Safety issuesWhen maintaining the roof, do not damage the surface of the cladding, gutters and flashings.

* Soft protection should be placed on any equipment used, where it impacts on the roof cladding or gutters.

* Do not walk on roofs (ie patios and verandahs) which are not designed for foot traffic.

* When walking on unprotected roofing, soft rubber soled shoes should be worn.

* Walk on at least two ribs, as close to supports as possible.

* Avoid scratching the surface of the cladding.

2. Maintenance Requirements & FrequencyMaintenance should be carried out at least every four months, preferably - at the end of autumn and the end of spring.

In the case of extreme events (storms, tempest or other ‘Acts of God’), inspection should be carried out and abnormal maintenance undertaken as required.

3. Gutters and RoofingTwigs, dust, leaves and fungal matter (debris) should be removed regularly from gutters, downpipes, leafguards, slots holes and overflow devices - as failure to do so voids the warranty.

* Sweep debris into a pile using a stiff, soft bristled brush (shovels or hard tools should not be used).

* The whole roof and gutter should then be washed down with a hose, including high ends of gutters possibly protected by overhangs, rain heads, water spouts, slots, leafguards and overflow locations.

For complete terms and conditions of warranty, visit www.lysaght.com

Guidelines for roofing and rainwater maintenance

Step 3 Use a soft bristle brush to sweep out the pans. Rinse with water.

Step 6 Ensure all swarf (drill waste) is removed from the work area.

Step 5 Use a hose to quickly rinse the underside of gutters and roofs.

Step 4 The roof cladding should be clean after you rinse.

Step 1 Roof with leaf litter and dirt prior to cleaning.

Step 2 Use a hose to blow away twigs and soften hardened dirt.

Roof maintenance


As most of our gutters, downpipes, flashings and cappings are also made with COLORBOND steel, they also enjoy a warranty against corrosion to perforation ranging from 10* to 25* years depending upon the application.BlueScope Lysaght have been serving the building industry in Australia for over 150 years. So you can rest assured that your LYSAGHT warranty is your solid guarantee of product performance in years to come.For full warranty terms and conditions (including the

maintenance procedures outlined here) please visit:

www.lysaght.com

Cladding and rainwater goods warranties

3) When litter is removed, the layer of hardened dirt is revealed below.

4) Rinse the gutter with water to soften and break up the dirt.

5) Use a soft bristle brush and sweep the dirt out. Rinse again.

6) When the gutter has been cleaned, it should look like this.

1) A typical gutter clogged with leaves, twigs & dirt prior to cleaning.

2) Wear correct protection when clearing leaves and twigs.

Gutter maintenance

* Warranties are subject to our standard terms and conditions.

With proper installation and regular maintenance, your LYSAGHT roofing, walling and rainwater system products will provide years of trouble-free performance - we guarantee it!Because LYSAGHT claddings are made exclusively with ZINCALUME® or COLORBOND® steel, they are warranted against corrosion to perforation for a period of up to 25* years by BlueScope Steel. So you can rest easy under a roof made of LYSAGHT COLORBOND® steel.And because LYSAGHT rainwater goods are performance tested in our NATA-accredited materials science laboratory, you can be confident that they are 'fit for purpose' and will do the job they are designed for.

Notes:

2010 edition product cataloguec - bj howes

Documents