2011 sh + new pdts

7/28/2019 2011 SH + New Pdts

1/38

7/28/2019 2011 SH + New Pdts

2/38

7/28/2019 2011 SH + New Pdts

3/381 Toll Free : 800.989.5244 www.stronghandtools.com1 Toll Free : 800.989.5244 www.stronghandtools.com

Multi-Angle Magnets

Part No. Dimension Angles Max. Pull Force Weight

MS3503.86 x 2.95 x 0.63

98 x 75 x 16mm45 x 60 x 90

30 LBS

13.6kg

0.75 LB

0.34kg

MS350A3.86 x 2.95 x 0.63

98 x 75 x 16mm45 x 60 x 90

30 LBS

13.6kg

0.66 LB

0.3kg

Use these Multi-Angle Magnets for fast, simple set-ups at: 30, 45, 60, 90. Choose

from the Standard Magnet, or the XYZ Magnet with 3-Axis Magnetic Plate.

We recommend keeping both types on hand for faster, more accurate set-ups in 2-axis

and 3-axis applications.

Model MS350 shown

Model MS350A shown

MagTab DUOLow Prole holding at TWO POINTS on at, angled, square, or round vertical surfaces!

Adjustable Magnetic Base instantly adjusts and holds onto round, at and angled metal

surfaces.

2-Sided holding Join cross bar Hold Tabs

No clamping edges required! Clamp anywhere on at, round or angled

surfaces!

Position and hold pipes, tubes or plates at two points, on ONE side of

your workpiece, leaving ample space on the other side for welding.

Hold handles

The 3-Axis Magnetic Plate features two rare

earth disc magnets for 3rd axis holding.

Turn the Magnetic

Face Plate with your

nger to desired

position to hold stock.

Quickly snap together 2 or 3

-axis set-ups for tack welding.

Part No. Description Each DimensionPull Force

(ea.)

Total

Weight

MFT12Symmetric MagTabs

Twin Pack

4x 3 x 1-1/4

100 x 76 x 32mm

18 LBS

8kg

1 LB

0.45kg

Front:

Back:

Multi-Angle

New Products of 2012

I

7/28/2019 2011 SH + New Pdts

4/38Toll Free : 800.989.5244 www.stronghandtools.com

Gusset Magnet

Part No. Dimension Arm Length Magnets Weight

MGH204.5 x 4.5

114 x 114 mm

2.2

56mm7pc

0.6 LB

0.27kg

Part No. DimensionMax. Pull

ForceWeight

MXE133 posts per

set

16 LBS

7kg

0.2 LB

0.1kg

Unique! Developed by Customer Demand for quick parallel plane alignment, locating, andclamping of Gussets, Base Plates, and Panels.

This low-prole Gusset Magnet provides the unique function of holding stock securely at 3 points directly on the surface

area of Gussets, Base Plates, and Panels for locating and clamping, while leaving ample space for tack welding.

Four rare earth disc magnets set in the magnet face hold the Gusset Magnet against your frame or substructure with direct,

even clamping pressure for a fast, accurate and convenient setup. Three Adjustable 1-1/2 Magnetic Hex Bolts protrude

from the magnet face and can be pre-set to the correct depth to securely position the gusset panel in a precise location for

tack welding.

Three positioning pins in the magnet face act as a guide for the quick alignment and positioning of the Gusset Magnet

against the substructure. Equipped with a total of 7 magnets, the Gusset Magnet is easy to handle, place, and remove.

The Gusset Magnet comes with a pair of attachable arms that swing out from the magnet body to hold stock at any point,

and any angle.

3 x Magnetic Hex Bolts

Magnets

MXE13Holding a 3-Axis

workpiece.

Magnetic Posts installed on Adjust-O

Magnet Squares (Sold separately).

3rd-Axis Magnetic Posts for Adjust-O Magnet Squares

Reference

Quickly and easily set-up 3-Axis workpieces.

Use on either side of the magnet squares.

Fits all MSA Adjust-O Magnet Squares.

Attachable / Detachable Arms

swing out to hold stock at two

points at any angle.

Pre-set 1-1/2

(38mm) Magnetic

Hex Bolts to

required depth for

panel positioning.


7/28/2019 2011 SH + New Pdts

5/383 Toll Free : 800.989.5244 www.stronghandtools.com


Panel ClampsMagnets hold clamp parts and panels together!

Magnets in the Keeper Plate and the clamp body hold your panels in

position for a speedier, and more efcient setup. NO MORE fumbling

while trying to hold the panels and the clamps!

Turn the spring-loaded screw to adjust the opening to accept panels of

different thicknesses [Max. 0.2 (5mm)].

Wider-than-standard clamp body holds your panels atter, for a more

precise setup. Panels will not spin out of alignment.

A magnet in the Keeper Plate holds your panels together even when used

in the vertical position.

Consider our Sheet Metal Magnet (Part No. MCB82) for top-side

alignment of panels.

The BETTER WAY to

align & hold panels for

butt welding.

Total: 3 Magnets

Spring Loaded

Magnetic

Keeper PlateWeight: 0.24 LB ( 0.1kg)

Sheet Metal MagnetsHold sheet metal and automotive metal panels rmly in a positive location for cutting,

welding, tacking, painting and repair operations.

Rare earth disc magnets in the magnetic plate have superior gripping power.Use horizontallyor vertically. The strong, generously sized plastic handle makes placing, moving, and

removing the Sheet Metal Magnets fast and easy.

3-1/4

(83mm) Dia.

ReplaceableRubber Pad

Part No. Description Weight Max. Magnetic Pull

MCB82 Sheet Metal Magnets (Twin Pack) 1.2 LBS

0.54kg

100 LBS ( 45kg )

(Based on 0.07/ 2 mm steel plates.)

MCB802 Replaceable Rubber Pad x 10 pcs. -- --

MCB84 2 pcs. Sheet Metal Magnets, 1 pc. Mountable /

Magnetic Wall Caddy, 3 pcs. Plastic Hold Down Straps.

2 LBS

0.9kg

--

Ideal for positioning

and holding sheet

metal for butt

welding.

P/N: MCB84

P/N: MPC12

Twin Pack

V

7/28/2019 2011 SH + New Pdts



Large V PadTurn the Heavy Duty P Rail Utility Clamps into a pipe clamp

with this large V-Pad accessory.

[P Rail size Utility Clamps 1-9/16 x 3/4 (39.6 x 19mm),

clamping pressure 4,800 LBS (2,177kg) ]

Part No. Dimension Weight Tapped Hole For Clamps

XPV4.75 x 1.5

120.7 x 38.1mm

0.86 LB

0.39kg3/8 - 16 UP Series

Magnetic Nut & Bolt Holders

Hold Nuts and Bolts in place before tightening.

MNB50 5 piece Set includes:3 MagneticPins

1pc. Magnetic Wrench

Attachment 4 pcs Magnetic Rings

Slide Magnetic Ring on Hex Wrench Tip to steady,

pickup, and hold nuts and bolts in place while you work.

Clip Magnetic Wrench Attachment on any size wrench tohold nuts and bolts in place before tightening.

No more fumbling while trying to hold small parts!

Ideal when working in tight spaces and hard to reach

areas!

Total Weight: 0.08 LB ( 0.04kg )

V-Pad shown mounted on

P Rail U-Clamp

Hex Size: 3/16, 1/4, 5/16, 3/8

(5mm, 6mm, 8mm, 10mm)

P/N: XPV

7/28/2019 2011 SH + New Pdts



VI

MIG / TIG Gun HoldersHandy Accessory Plate (included with Part

Nos. MRM12, MRM13) features a slot for

MIG Pliers and a Nozzle Gel Canister.

Fully enclosed Magnetic Base allows

easier clean up of metal fuzz.

Part No. MRM13 Kit contains the MIG Gun

Holder (MRM12), and MIG Pliers (PM08).

TIG Gun HolderMIG Gun Holder with

Accessory Plate

MIG Pliers

MRT15MRM12 PM08

Slot to rest

Tig rodAluminum cover on

bottom for easier

cleaning of fuzz.

(Magnetic Base)

Nozzle

Gel Canister

Accessory Plate Magnetic

Base

Slot to

park MIG

Pliers

Part No. Description Dimension Weight

MRM12 MIG Gun Holder w/ AccessoryPlate

3.5 x 6 x 5.389 x 152 x 135mm

2.8 LBS1.27kg

PM08 MIG Pliers8

203mm

0.6 LB

0.27kg

MRM13MIG Gun Holder w/ Accessory

Plate & MIG Pliers--

3.4 LBS

1.54kg

MRT15 TIG Gun Holder3.5 x 6.3

89 x 160mm

1.8 LBS

0.82kg

New Pipe Pliers w/Stainless Steel V-PadsThe convenient way to hold round or square tubes securely for butt-welding.

Features:

Wide opening allows the Pipe

Pliers to hold up to 2-1/2 (64

mm) diameter pipes.

Adjustable top spindle for holding

pipes of varying sizes.

2 large V-Pads provide a better

clamping surface.

0 & 45 angle clip allows angled

clamping. Stainless Steel V-Pad also sold

separately. (See chart below)

Part No. Description OALThroatDepth

Min / Max

DiameterThread Weight

PG635VS Pipe Plier with Stainless Steel V-Pads8-1/2

215mm

3

76mm

1-1/2 - 2-1/2

40 - 64mmM8

1.2 LBS

0.5kg

XFVS Stainless Steel V-Pad Hole Dia.: 3/8-16 (M10)0.3 LB

0.1kg

Stainless Steel V-Pad

( P/N:XFVS )

P/N: PG635VS

7/28/2019 2011 SH + New Pdts



Hand Rest Glide KitUnique and Very Practical! This Hand Rest glides smoothly on cut-to-length angle iron allowing you to steady your wrist.

Reduce hand and shoulder stress and fatigue. Safely keep your hand and arm elevated. Powder coated steel rest plate

swivels 360 on the base for support in a full arc.

Kit includes Hand Rest, and 2 Magnetic Mounting Bases. Total weight: 1.5 LBS (0.68kg).Angle Iron NOT provided.

Hand Rest

(3 Magnets on each base)

Magnetic Mounting Bases 2 pcs

360

376mm

4.3109mm

Mounting Hole

2.563.5mm

Hand Rest Glide Kit Assembly Example:*Angle Iron size 1.5 (38mm)

Cut to length

Cut Angle Iron to

the desired length.

MagBracePosition a single metal piece, or 2-axis stock, at 90 on round,

square, or angled structures before tack welding. The MagBrace

creates a rest for secure holding and positioning of stock. Magnets

on the face of the 1.8 rest provide light duty holding of stock.

Made of machined aluminum die casting. Choose from MagBrace only

(Mount with your own clamp) or MagBrace & Clamp Set.

DB

A

C

H

Part No. Description A (max square) B (max ) C D H Weight

MX50 Brace with 2 magnets3 x 3

76 x 76mm

2.75

70mm

4.5

114mm

1.8

46mm

2.4

61mm

0.66 LB

0.3kg

UBB65MagBrace mounted on

clamp w/Spring-loaded armMagBrace same as above

1.5 LBS

0.7kg

Magnets

Angle iron centered

on square tube.

P/N: MHR10

P/N: UBB65 P/N: MX50

Mount MagBrace with

clamping device.

7/28/2019 2011 SH + New Pdts

9/38

7/28/2019 2011 SH + New Pdts

10/38

7/28/2019 2011 SH + New Pdts

11/38

7/28/2019 2011 SH + New Pdts

12/38

7/28/2019 2011 SH + New Pdts

13/38

7/28/2019 2011 SH + New Pdts

14/38

7/28/2019 2011 SH + New Pdts

15/38

7/28/2019 2011 SH + New Pdts

16/38

7/28/2019 2011 SH + New Pdts

17/38

7/28/2019 2011 SH + New Pdts

18/38

7/28/2019 2011 SH + New Pdts

19/38

7/28/2019 2011 SH + New Pdts

20/38

7/28/2019 2011 SH + New Pdts

21/38

7/28/2019 2011 SH + New Pdts


Locking Chain Pliers & Forged Adjusta-Clamps

The flexibility to clamp around odd shaped items!

Holds 6 (150 mm) pipes with the standard 24 chain.

Clamp around odd or awkwardly shaped items.

Hold two workpieces, or a group of materials securely in place

while you weld.

The ONLY Locking Chain Pliers with replaceable chains of

various lengths! Chain lengths from 16 to 48.

Made of heat treated alloy steel for strength and durability.

PC924

Replaceable ChainUnscrew and remove existingchain. Replace with a shorter orlonger chain as needed.

Quick Turn Crank HandleAdjust the opening andtorque with the handle.

Chain RetainerRetains the positionof the chain.

Easy-In Easy-Out FishtailSpecial fishtail chain end foreasy insertion into clamp jaws.

Holds up to

6(150 mm)

pipes

Locking Chain Pliers

Custom length chains available.

Part No. Description OAL Weight

PC924 Standard Chain Pliers 9 1.9 lbs

with 24 (60 cm) chain 230 mm 0.9 kg

PXC16 16 Replaceable Chain 16 0.5 lb40 mm 0.2 kg

PXC36 36 Replaceable Chain 36 1.0 lb91 mm 0.5 kg

PXC48 48 Replaceable Chain 48 1.4 lbs122 mm 0.7 kg

Handi-Hammer - The handle-less Tapper!The Unique Dead-Blow Tapper

One Steel End for hard surfaces.

One Soft Face for non-marring applications.

Eliminates bounce back and increases impact.

Fits easily in Tool Kits, Tool Boxes & Work Bench Drawers.

Ideal for confined areas!

Forged Adjusta-ClampsThe Rugged Forged Steel Pivot Clamp.

Instant height adjustments without blocks or shims. One piece

assembly allows for quick setups.

Removable brass shims protect machine table and workpiece.

Clamp can swing 90 in either direction for loading clearance.

CH-10 1-5/8 x 5 0.6 lb40 mm x 127 0.3kg

CH-14 1-3/4 x 5-1/4 0.9 lb45 mm x 133 0.4kg

Part No. Dimension Weight

NEWNEW

Steel EndFor hard surfaces.

Soft EndFor non-marringapplications.

CH-14

StudPart No. Size Capacity L1 L2 T W Weight

L2L1

T

W

Stud

No spacer needed, ideal for machine centertombstones or other vertical mountings.

Clamp two unevenworkpieces. With riser

blocks the ForgedAdjusta-Clamps can beused for tall jobs.

850740 3/8 1-3/4 1-1/8 1-7/8 1 1-1/4 9 oz44 mm 29 48 25 32 0.3 kg

850750 1/2 2-1/16 1-7/16 2-5/16 1-7/16 1-5/8 17 oz52 mm 37 59 37 41 0.5 kg

850760 5/8 3 2 3-1/4 1-7/8 1-7/8 2.4 lbs76 mm 50 83 48 48 1 kg

Max.

Visit our website at www.valtrainc.com for more information.

7/28/2019 2011 SH + New Pdts


Table Mount C-Clamps & Expand-O Pliers

The only expanding and spreading pliers in the market.

PE6 6-1/2 500 lbs 5/16-18 1 3/4 0.5 lb PE6M 165 mm 230 kg M8 25 mm 19 mm 0.2 kg

PE10 10 900 lbs 3/8-16 1-3/8 1-3/8 1.8 lbs PE10M 255 mm 410 kg M10 35 mm 35 mm 0.8 kg

PEV6 6-1/2 500 lbs 5/16-18 1 3/4 0.8 lb PEV6M 165 mm 230 kg M8 25 mm 19 mm 0.4 kg

PEV10 10 900 lbs 3/8-16 1-3/8 1-3/8 2.4 lbs PEV10M 255 mm 410 kg M10 35 mm 35 mm 1.1 kg

ClampingPart No. OAL Pressure Thread Min. Stroke Weight

Separate cabinets

Expand brackets

Align to fit holes

Insert panel intoU-channel

Ideal for Metal or Wood working.

Min.

PE10

Optional Pipe Adaptors

Attach 1/2 NPT pipes for wide spreadingjobs. See Accessories page 25.

Unique, Reverse-Action Clamping Pliers!Jaws move in opposite directions to push against two surfaces.

Patent No. US 6,993,999 B2

NEW! Expand-O Pliers with V-Pads

and Extension Rod! (PEV6 & PEV10)

Features:

One Magnetic V-Pad, One Standard V-Pad.

Use the Extension Rod to increase reach

by 1 - 2.

Use the bottom Adjustable Magnetic V-Pad

to set the pliers in place.

When expanding, the two V-pads instantly

adjust to round or flat surfaces.

Extension Rod

V-Pad

Magnetic V-Pad

PE6V

Table Mount Locking C-Clamps

Expand-O Pliers

Mounts directly to any work bench, drill press, etc.

Mounting base hole accepts standard 5/16-18 bolts and uses

push-down action to hold your workpiece securely.

Use the L-Handle for rapid tightening

Rapid lock and release. Ideal for repetitious clamping.

PTT934

B

A

0.39PTT634 : 6PTT934 / PTT956 : 8

1-3/16

Throat Max. MountPart No. Depth (A) Capacity (B) Thread Weight

PTT934 3-3/8 4 5/16-18 1.6 lbs86 mm 102 mm M8 0.7 kg

PTT634PT09

PT11

PT14

5/16-18 0.9 lb76 mm 102 mm M8 0.4 kg

PTT956 6-1/8 4-3/4 5/16-18 2.0 lbs155 mm 120 mm M8 0.9 kg

3 4

7/28/2019 2011 SH + New Pdts


Welders Angle Clamps

2 and 3 Axis Fixture Vises

WAC22 Standard screw, Machined on two outside surfaces 2.21 3.54 1.85 1.28 8.8 lbs 56 mm 90 mm 47 mm 33 mm 4.0 kg

WAC34 Standard screw 3.75 4.80 2.45 1.38 11 lbs 95 mm 122 mm 62 mm 35 mm 5.0 kg

WAC35D Quick Acting Screw, Two stand-offs, 3.75 4.80 2.45 1.38 11 lbs Machined on two outside faces 95 mm 122 mm 62 mm 35 mm 5.0 kg

WAC45 Quick Acting Screw, Two stand-offs, 4.75 5.32 3.92 2.25 23 lbs Machined on two outside faces 121 mm 135 mm 100 mm 57 mm 11.0 kg

WAC35-SW 3-Axis Fixture, Quick Acting Screw, Two stand-offs 3.75 4.80 2.45 1.38 24 lbs Swing Away Arm 95 mm 122 mm 62 mm 35 mm 11 kg

WAC45-SW 3-Axis Fixture, Quick Acting Screw, Two stand-offs 4.75 5.32 3.92 2.25 43 lbs Swing Away Arm, Two magnetic rests 121 mm 135 mm 100 mm 57 mm 20 kg

Miter Jaw JawPart No. Features Joints (A) Length (B) T-Clearance Height (D) Weight

2-Axis

3-Axis

* Optional Magnetic Rest supports workpieces. 4 per set. Part No. T55410-K4. 0.5 lb (0.23 kg)

Made with machined cast iron. Featuring these improvements:

Machined outside faces - usable for upright joint

Stand-off increases access

Quick acting screw on deluxe models.

T-Clearance (C)

Miter Joints (A)

JawLength

(B)

Quick Acting Button(WAC35D, 35-SW, 45, 45-SW only)

Holes for

Stand Off

Jaw Height (D)

1 Base height

Stand-Off

T-Handle

2-Axis Welders Angle Clamps

Tubes

T-Joints

Upright

Position

Stand-Offs

Optional Magnetic Rest supports workpieces.4 per set. Part No. T55410-K4

3-Axis Welders Angle Clamps

With the push of the buttons, the

threaded screws easily slide in and out.

When the job is finished, simply swing

away the 3rd Axis arm for quick and

easy part removal.

Hold parts in position during cool down

to minimize distortion due to contraction.

Available in 3.75 and 4.75 capacities.

Model WAC45-SW comes with a curved

arm for greater workpiece clearance.


Quick Acting Screw

WAC35-SW

WAC45-SW

4-3/4 Capacity!

Swing AwayArm

Holds a 3-axis workpiece in position before welding.

Features the Quick Acting Screws and Swing Away Arm.

7/28/2019 2011 SH + New Pdts


LF-2

Part No. Jaw Length (A) Jaw Height T-Clearance (B) Weight

LF-2 7 1-1/2 2-1/2 3.0 lbs178 mm 38 mm 64 mm 1.4 kg

Aluminum 90 Tru-AngL

Accurate Right Angle Fixture is CNC machined for accuracy.

Weld spatter proof & made of high strength aluminum alloy. Holds round, square, flat and angle shapes.

Works on both the outside and inside surfaces.

T-Clearance (B)

JawLength

(A)

Portable MagVise & 90 Tru AngL

Time saving aluminum vises for use in the shop and in the field.

Use the lightweight, compact Portable

MagVise for quick 90 clamping in the

shop, or in the field!Magnets in the walls instantly hold pipes,

tubes, angle iron, or metal plates in

position for fast, accurate clamping at 90.

Model WK50

Features the Quick-Acting Adjustable

Spindle. Press and hold the Quick

Acting Button and the spindle assembly

slides in and out for a super fast set-up!

Release the button and the threads

re-engage for tightening.

Model WP60

Features a Plier/Vise combination for

clamping flat workpieces, such as

metal plates and angle iron. Pliers can

be detached from the vise for easy

removal of welded stock.

Optional Magnetic RestsPart No. T55410-K4

4 pcs. per set

These handy Magnetic Rests are ideal

for light duty holding, positioning, or

steadying long metal pieces and parts.

Portable MagViseNEW

WK50 MagVise with 1 3.35 1.2 2 1.7 lbs Adjustable Spindle 25 mm 85 mm 30 mm 50 mm 0.8 kg

WP60 MagVise with Pliers 1 3.35 1.2 2 1.9 lbs25 mm 85 mm 30 mm 50 mm 0.9 kg

WP601 MagVise Only 1 3.35 1.2 - 0.9 lb25 mm 85 mm 30 mm 0.4 kg

Base Jaw Jaw Max

Part No. Description Height Length Height Capacity Weight

The rotateable spindle allows for holding work-pieces with different thicknesses.

The pliers can mount from front side of theMagVise.

When the job is finished, easily slide the pliers outof the WP60 MagVise.

Use the provided leveling screw and optionalMagnetic Rests to level long workpieces.

WK50MagVise with Quick Acting

Adjustable Spindle

WP60MagVise with Pliers

WP601MagVise Only

Quick Acting Button

Pliers sold separately.Please refer to page 11.

7/28/2019 2011 SH + New Pdts


JointMasterAngle Clamping Tools

Fast, precise and affordable clamping tools for corners and T-joints.

PL Series

The single-hand corner clamping tool.

Ideal for quick hold and release on metal,

wood & synthethic materials.

A helping hand to hold stock firmly at

right angles while creating or repairing

permanent joints.

PL Series comes with 1 pair of pliers.

PT Series

The 90 Fixed JointMaster

Retractable plate for edge alignment

V-Grooves for holding round pieces.

Ideal for holding two pieces of different

thicknesses that require individual

adjustments.

PT Series comes with 2 pairs of pliers.

PA Series

The Adjustable JointMaster

Adjustable from 30 - 275.

Adjust to the desired angle & lock into

position with the handle.

Join round & flat workpieces, or materials

with different thicknesses.

PA Series comes with 2 pairs of pliers.

Pivoting HeadAdjusts for varyingthicknesses.

90 Clamp A quick way to hold workpieces

at 90.

Capable of holding a 3-axis

workpiece by adding a

Pipe Pliers (see pg.12).

Wide opening offers

unobstructed welding access.

RetractablePlateMakes edgealignment asnap.

Adjustable HandleCan be tightened &reset to any angle.

Capacity (B) Capacity (B):

PA622 : 0 - 1-1/4

PA634 : 0 - 3

30-275

Capacity (B)Capacity (B):

PL622 : 0 - 1-1/4

PT634 : 0 - 3

Capacity (B):

PL622 : 0 - 3/4

PL634 : 0 - 1-1/4

Capacity (B)

PL622 2 3/4 7-1/2 1.0 lb50 mm 19 mm 190 mm 0.5 kg

PL634 3 1-1/4 8-1/2 1.1 lbs

76 mm 32 mm 216 mm 0.5 kg

PT622 2 1-1/4 7-1/2 1.6 lbs50 mm 32 mm 190 mm 0.7 kg

PT634 3 3 8-1/2 2.5 lbs76 mm 76 mm 216 mm 1.1 kg

PA622 2 1-1/4 7-1/2 2.0 lbs50 mm 32 mm 190 mm 0.9 kg

PA634 3 3 8-1/2 2.4 lbs76 mm 76 mm 216 mm 1.1 kg

UDL365 3 2 9-1/2 1.7 lbs76 mm 50 mm 241 mm 0.8 kg

Throat Max.Part No. Depth (A) Capacity (B) OAL (C) Weight

B

A

C

UDL365

PL / PT / PA Series UDL365

UDL365

PG634V(Sold separately)

A

B

C

7/28/2019 2011 SH + New Pdts


PowerBase & Ground Hog Grounding Tools

Power through your grounding applications!

High clamping pressure improves arc stability and reduces power consumption.

Prevents current restriction and allows a complete transfer of the electrical current.

Controls the electrical current by isolating the contact surface and the cable connection.

Get a smooth, continuous arc with no fade, and no heat transfer while improving cable

life, and reducing power consumption.

Ground Hog Clamps

The Ground Hog

The groove design on the copperhead seals out

weld spatter and reduces particle buildup.

Side screw provides a secure cable connection.

Ground Hog body rotates for cable positioning.

GP950

Ground HogRated at 530 AMPS@ 60% duty cycle(with 3/0 cable)

PowerBase Grounding Magnet

A

BC

Amperage / Throat Max. Tapped ClampingPart No. Cable Size Depth (A) Opening (B) Hole (C) Pressure OAL Weight

GP630 300A 3 1-1/4 5/16-18 240 lbs 6 0.9 lbGP1530 2/O - 0.427 76 mm 32 mm M8 110 kg 150 mm 0.4 kg

GP950 450A 3-1/2 2-1/2 3/8-16 400 lbs 11 2.4 lbsGP2850 2/O - 0.427 89 mm 64 mm M10 180kg 280 mm 1.1 kg

GP951 530A 3-1/2 2-1/2 3/8-16 400 lbs 11 2.4 lbsGP2851 3/O - 0.475 89 mm 64 mm M10 180kg 280 mm 1.1 kg

Part No. Amperage Dimension Magnetic Force Weight

GM203 300A @ 60% Duty Cycle 2 x 2 x 1.4 44 lbs 0.9 lb50 mm x 50 x 64 20 kg 0.4 kg

GM205 500A @ 60% Duty Cycle 2 x 2.75 x 1.4 110 lbs 2.4 lbs50 mm x 70 x 64 50 kg 1.1 kg

The PowerBase Grounding Magnet sets up quickly and easily. Start grounding instantly

Powerful rare earth magnet delivers heavy duty holding power.

The V machined surface grips round parts.

The copper connector stud is located on top and allows for a full 360 cable rotation.

Rugged, compact steel housing for a fast and safe ground, even in tight spots!

The ON/OFF Lever is easy toturn, even while wearing gloves.

Turn OFF the PowerBase Grounding Magnet and

metal chips fall away.

Holds securely onto round or flatsurfaces.

The copper connector on topallows for 360 cable rotation.

Power through your grounding applications!

NEW

7/28/2019 2011 SH + New Pdts

28/389

Platen Clamps & Hold Down Clamps

Toll Free : 800.989.5244 www.stronghandtools.com

Hold down action clamps with unique features and accessories.

Modular Platen Clamps

Hold Down Clamps

Acorn Bushing

For fast, secure clamping, simply insert the clamp into the 1-3/4"

square hole in your acorn platen. Slide the clamp arm down to the

work piece and turn the T-Handle to tighten.

Choose from Acorn Bushing or Table Mount Models. Clamp comes with standard or heavy duty Swivel Pads.

Unique optional Side-Kick Attachment provides push-action

horizontal clamping force. (See accessories page)

Optional V-Pads can be mounted on the Sliding Arm or

Side-Kick Attachment. (See accessories page)

Part No. Rail Size Pad Opening Throat

UF8NA F Standard 8 4-3/4203 mm 120 mm

UF10NA F Standard 10 4-3/4254 mm 120 mm

UF12NA F Standard 12 4-3/4

305 mm 120 mm

UM12NA M Heavy Duty 12 5-1/2305 mm 140 mm



Table Mount

Part No. Rail Size Pad Opening Throat

UF8NC F Standard 8 4-3/4203 mm 120 mm

UF10NC F Standard 10 4-3/4254 mm 120 mm

UF12NC F Standard 12 4-3/4

305 mm 120 mm

UM12NC M Heavy Duty 12 5-1/2305 mm 140 mm



Heavy Duty Pad

Acorn Bushing Table Mount Acorn Bushing

For 1-3/4square holes

2.12

2.24

1.6

4 x 1/2

OptionalScrew-onTop V-Pad

Optional Sidekick

Table Mount

See Page 25 for accessories

ptionaScrew-onop - a

ptional Sidekic

Bolt the clamp down to your worktable using the

3/8 hole in the base.

The 1/2" copper plated Acme spindle resists weld

spatter, and the swivel tip makes quick contact

with your workpiece.

Hold pipes by adding our Clip-On V-Pad, Part

#XDA2. (See accessory page 26).

Part No. Capacity Weight

VHD30 2-3/4 2.0 lbs 70 mm 0.9 kg

NEW

Copper PlatedAcme Screw /Ductile Iron Body

2-3/4"MAX.

5.8

4.5

5.62.0

.63

.39

3.0

1.3

Shown with optionalClip-On V-Pad (XDA2).

7/28/2019 2011 SH + New Pdts

29/38

Shark Clamps, Half Clamps & Side Clamps

Precise scissor action clamps with the Quick Acting Buttons.

Toll Free : 800.989.5244 www.stronghandtools.com

Half Clamps Patent No. US 6,983,525 B2

How to Use

Tack weld the front side of 1-1/2" pipe coupon to thelower of the two surfaces. Slide Half Clamp onto the cutpipe, turn the handle until the misaligned materials align.

The Efficient, Safe Way to Align Materials.

The DOG & WEDGE and CUT-OFFC-CLAMP methods of material alignment

are messy, time consuming, and unsafe!

Align materials in the fabrication of

water tanks, bulkheads, deck sections,

flat plates, etc.

For big jobs, tack weld additional 1-1/2"

cut pipes along the joint.

1.96+.000

- .040

3.7 lbs

20 mm Thread

Shark Clamps

QuickActing Button

C-Clamping JawPivoting, hinged arms provide a wide opening.

Inside serrations hold workpieces securely.

Shown with optional rubber pads. (P/N: SCP)Part No. Description Pull Force Opening Weight

SC50 T-Handle 1,000 lbs 5 2.2 lbs455 kg 127 mm 1.0 kg

SC50 Straight 300 lbs 5 2.0 lbsHandle 135 kg 127 mm 0.9 kg

SC65 T-Handle 1,000 lbs 6-1/2 2.5 lbs455 kg 165 mm 1.1 kg

SC65A Straight 300 lbs 6-1/2 2.2 lbsHandle 135 kg 165 mm 1.0 kg

Hinge

Step-Over Applications Uneven Thicknesses Clamp Round Parts


SC65A

SC50A SC50

Straight Handle Model with soft grip T-Handle Model (Heavy Duty)

A

Side Clamps

Copper Plated Acme Screw Ductile Iron Body

Copper Plated Acme Screw /Ductile Iron Body

Fast Set-ups, just hold the button downand pull-push the handle to desired

clamping position, release the buttonand turn the handle to tighten.

5.753.6

2

2.4

51.9

1.7

Part No. Weight

VSC15 5.6 lbs

2.6 kg

Build push-action clamp to custom heights.

Insert pipe (1-1/2 dia.) of desired length. Base

can be bolt-mounted to the table.

Insert pipe ofany length.

7.5

3.5

2 3

2

Part No.

VHC151.7 kg

3.7 lbs

Weight

7/28/2019 2011 SH + New Pdts


NOMADEconomy Welding Table

VeryAffordable. FullyAdjustable. EasilyMovable.

MagSpring Clamps(UBV45 - 3-1/2 Cap.)

Multi-Angle Magnet(MS346C)

Mini Magnet(MS346A)

AdjustableMagnetic V-Pads

(XDV4 - 4 magnets)

2 1 1 2

Pull Handle14 Gauge(2 mm)Tabletop

Unique 1.1(28 mm) SlotsAllow for clamping AT ANY POINT.

RetractableGuide RailsOn two sides canbe used as a fence,guides, stops, orclamping edges.

Adjustable HeightTable height adjustsfrom 26 - 32.(660 - 810 mm)

International Patent Pending

Tabletop adjusts to three positions:Horizontal, 30, and Folded for Compact Storage and Mobility.

Three 1.1 (28mm) slots in the tabletop allow for

insertion of clamps to reach any point on the table.

Tabletop tilts to three positions: Horizontal, 30, and

folded for mobility.

Two retractable, perpendicular steel guide rails can be

used as guides, stops, or clamping edges.

Tabletop height can be adjusted from 26 to 32.

Table moves about the work area on 2 sturdy casters.

Nomad Connector PlateNEW

Need more tabletop workspace? Use the Nomad Connector Plate to join

two Nomad Tables together to create a 7.5 (2.3 m) long workstation!

Clamp and work on larger projects, or multiple projects with the fully

adjustable work surface! There are thru holes on all four sides of the

Connector Plate for multiple mounting options.

Part No. Weight

TSL30 16.4 lbs 7.4 kgTSL30 (Includes all mounting screws)

Assembly Example(All Products sold separately)

This 6 piece tool kit contains useful toolsto use in conjunction with the table.

Nomad Economy Tool Kit

Part No. TSK104 (TSK104M)

MagSpring Clamps (UBV45)

Multi-Angle Magnet (MS346C)

Mini-Magnet (MS346A)

Adjustable Magnet V-Pads (XDV4)

2

1

1

2

Nine 1.1 Table Slots

7.5 (2.3 m) Long

TS3020 30 W x 20 L 26 - 32 1.1 0, 30, Folded 350 lbs 44 lbs 760 mm x 510 660 mm - 810 28 mm 160 kg 20 kg

Part No. Tabletop Size Table Height Range Slots in Tabletop Table Positions Load Capacity Weight

7/28/2019 2011 SH + New Pdts


VT12265Vertical Handle

VT12130Vertical Handle

VT22502-BHorizontal Handle

VT225-DHorizontal Handle

VT36204Push/Pull

VT36202Push/Pull

The ease and speed of a Toggle Clamp combined with the new, unique Quick-Mount Slotted

Base, and Knobbed Spindle. These Toggle Clamps are ideal for holding a workpiece in a positive

location for quick and easy clamping in repetitious work.

The unique twin-slotted base allows the clamp to slide onto two

5/16-18 Hex Head Screws for quick mounting, and removal.

Now you can mount and use a Toggle Clamp anywhere, without

creating a permanent, dedicated set-up. Front and rear slots are

set in a perpendicular configuration for secure slide-in mounting.

For taller workpieces, use the Magnetic Riser Blocks and

Shims Kit to mount the Slotted Base Toggle Clamps at thedesired height. The Magnetic Riser Blocks feature twin holes

for use in either vertical or horizontal position. Use the Shims

for incrementalheight adjustments.

Quick-Mounting!

Stackable Magnetic Riser Blocks & Shims Kit

Uniform 2 (50 mm)Mounting Base

Part No. Description Capacity A B C Stroke Weight

VT36202 Push/Pull 200 lbs 0.81 3.0 2.5 0.75 0.5 lb

VT36204 Push/Pull 300 lbs 1.56 3.9 4.5 1.50 0.8 lb

VT225-D Horizontal 500 lbs 1.37 2.75 6.61 - 0.6 lb

VT22502-B Horizontal 550 lbs 1.34 3.11 8.62 - 1.0 lb

VT12130 Vertical 500 lbs 1.25 2.81 5.50 - 0.8 lb

VT12265 Vertical 750 lbs 1.75 3.58 7.50 - 1.4 lbs

UNIT: inche

Part No. Description Weight

VTX6400 6 pc. Magnetic Riser Blocks & Shims Kit 0.77 lb

0.20

1

3.34

.38

.38

2

Knobbed SpindleLoosen,Slide,Tighten

A quick and easy way toadjust spindle position and

height adjustments.

A

B

C

VT12130VT12265

VT36202VT36204

Riser Blocks and Shims use in conjunction

with the VT36202 Toggle Clamp.

VT225-DVT22502-B

A

C

B

AB

C

Plunger

2 Magnetic Riser Blocks

1 x 1 x 3.34 (25 x 25 x 85 mm)

1 x 2 x 3.34 (25 x 50 x 85 mm)

4 Shims

1 x 0.12 x 3.34 (25 x 3 x 85 mm)

1 x 0.20 x 3.34 (25 x 5 x 85 mm)

The 6 pc. kit comes complete with:

Optional Threaded Adaptors

Convert work surface holes to

5-16/18. Magnetized Threaded

Adaptor Plate mounts under-

neath your work surface, and

provides two 5/16-18 threaded

holes.

Part No. TXT5203

TXT6203Weight: 0.25 lb.

0.11 kg

1

1

2

2

New! Twin Slot Base Toggle Clamps

Stackable Magnetic Riser Blocks & Shims available

7/28/2019 2011 SH + New Pdts

32/383

Good Hand Toggle Clamps

Toll Free : 800.989.5244 www.goodhandinc.com

Ideal time-saving jig and fixture clamps.

Part No. Bar Capacity A B C D E F G H Weight

GH-101-A U 110 lbs 0.75 1.02 0.63 0.94 1.00 1.31 0.17 3.03 0.13 lb

GH-13005 U 150 lbs 0.50 1.21 0.53 0.63 1.03 1.00 0.17 1.40 0.13 lb

GH-12050 U 200 lbs 0.89 1.30 0.50 1.06 1.00 1.56 0.20 3.74 0.38 lb

GH-12050-U U 200 lbs 0.89 1.30 0.50 1.06 1.00 1.56 0.20 3.74 0.38 lb

GH-12070 Fixed 200 lbs 0.89 1.30 0.50 1.06 1.00 1.56 0.20 3.74 0.38 lb

GH-13007 U 330 lbs 0.87 1.97 1.06 1.16 1.73 1.81 0.28 2.31 0.50 lb

GH-12130 U 500 lbs 1.25 2.81 0.75 1.25 1.37 1.81 0.28 5.50 0.78 lb

GH-12132 U 500 lbs 1.25 3.75 0.75 1.25 1.37 1.81 0.28 5.50 0.81 lb

GH-12265 U 750 lbs 1.75 3.58 1.25 1.78 1.94 2.53 0.34 7.50 1.40 lbs

Vertical HandleHold Down Action

Horizontal HandleHold Down Action

A

B C

D

E

F

H

4-G

Fixed

Solid

UNIT: inches

Part No. Bar Capacity A B C D E F G H Weight

GH-201 U 60 lbs 0.37 0.87 0.63 0.63 0.94 0.94 0.17 3.11 0.09 lb

GH-201-A Fixed 60 lbs 0.37 0.87 0.63 0.63 0.94 0.94 0.17 3.11 0.09 lb

GH-22100 U 150 lbs 1.00 2.25 1.06 0.87 1.56 1.37 0.20 5.39 0.24 lb

GH-201-B U 200 lbs 1.00 2.17 1.06 0.87 1.45 1.42 0.20 5.43 0.29 lb

GH-20820 U 220 lbs 2.75 2.68 0.63 1.00 1.25 1.50 0.26 6.41 0.88 lb

GH-225-D U 500 lbs 1.37 2.75 1.00 0.87 1.50 1.42 0.26 6.61 0.59 lb

GH-22185 U 550 lbs 1.13 6.50 1.25 0.87 2.19 1.37 0.28 10.95 0.78 lb

GH-20235 U 750 lbs 1.85 4.2 1.63 1.63 2.25 2.25 0.33 10.31 1.41 lbs

GH-204-G Open 1,400 lbs 2.00 3.00 2.76 1.18 3.54 1.89 0.33 10.55 2.69 lbs

UNIT: inches

Toggle Clamps for Welding Applications

GH-10448 GH-25383 GH-80325GH-36224 GH-204-G

GH-201/201-A GH-22100 GH-201-B GH-20820 GH-225-D

GH-22185 GH-20235 GH-204-G

GH-12050

GH-201-B

GH-101-A GH-13005 GH-12050 / 12050-U / 12070 GH-13007 GH-12130 / 12132 GH-12265

A

BC

D

E

F

H

4-GOpen Bar

7/28/2019 2011 SH + New Pdts

33/38Toll Free : 800.989.5244 www.goodhandinc.com

Toggle design allows instant lock & release of the workpiece.

Good Hand Toggle Clamps

Please call us at 800.989.5244 to request a comprehensive Good Hand Catalog.

GH-30509 GH-10247-AGH-75027 GH-70310GH-43160

DE

G

FA

BCH

J

GH-40323 GH-40341GH-431 GH-451

GH-301-A GH-302-F GH-36003GH-36092 GH-36010 GH-36330GH-304-E

Push/PullStraight Line Action

Latch TypePull Action

GH-301-A 100 lbs 0.63 0.50 2.68 0.63 0.63 1.06 0.17 8-32 1.73 0.11 lb

GH-302-F 300 lbs 1.25 0.96 5.51 1.38 1.61 2.20 0.20 5/16-18 3.07 0.66 lb

GH-36092 400 lbs 1.25 0.96 5.48 1.34 1.63 2.20 0.20 5/16-18 3.15 0.85 lb

GH-36003 600 lbs 1.25 0.97 4.69 1.44 1.34 1.97 0.26 5/16-18 3.23 0.78 lb

GH-36010 800 lbs 1.63 1.75 6.75 1.63 1.63 2.25 0.34 3/8-16 4.06 1.76 lbs

GH-304-E 850 lbs 1.65 1.25 6.25 1.62 1.62 2.25 0.33 3/8-16 3.87 1.28 lbs

GH-36330 2,500 lbs 2.00 0.81 7.00 1.37 1.63 2.25 0.34 3/8-16 2.83 2.06 lbs

Part No. Capacity A B C D E F G H J Weight

GH-40323 360 lbs 0.47 0.63 1.03 0.75 1.11 0.75 2.24 0.78 0.39 0.16 lb

GH-431 700 lbs 0.50 0.63 1.03 0.75 1.11 0.75 2.24 0.78 0.39 0.50 lb

GH-451* 375 lbs 1.44 0.75 1.50 1.37 1.94 0.31 8.31 2.00 1.50 0.59 lb

GH-40341 2000 lbs 0.98 1.63 2.37 1.50 2.13 1.75 4.50 1.50 0.75 1.50 lbs

*Adjustable single hook design. Optional latch plate GH-451-LP.

GH-36202 200 lbs 0.75 2.48 0.95 0.91 1/4-20 0.37 0.81 0.50 2.96 0.25 lb

GH-36204 300 lbs 1.50 4.53 1.22 1.18 5/16-18 0.43 1.56 0.63 3.86 0.60 lb

GH-36003

GH-431

GH-36202GH-36205

Mounting Plate for GH-36204

A

BC

DE

4-F

H

G THD

UNIT: inche

UNIT: inche

UNIT: inche

A

B

JD

L

KH

F THD

PlungerPart No. Capacity Stroke A B D F H J K L Weight

PlungerPart No. Capacity Stroke A B C D E F G H Weight

7/28/2019 2011 SH + New Pdts


Accessories

Replacement Parts and Accessories.

T-Strap Bolts (For Pliers)

For Step-Over applications.

P/N Thread Length

840435 3/8-16 3-1/2840435M M10 89 mm

840335 5/16-18 2-1/2840335M M8 64 mm

1-1/2

2-1/23/8"

5/16"

2

3-1/2

Fixed Glides (For Pliers)

With non-maring rubber pads.

P/N Thread Length

854740P 3/8-16 2854740PM M10 51 mm

2"

1.5"

0.3

Heavy Duty Replaceable Pads

P/N Description

XMJ Joint & Pad Kit for UM & UP Clamps

XMA1 Replacement Pad only

XMJ XMA1

Replacement joints and pads forUM & UP clamps.

Big Hex Spindles (For Pliers)

Fixed head spindles for Multi-PurposePliers.

P/N Thread Length

854714 3/8-16 2.6854714M M10 66 mm

854713 5/16-18 1-1/5854713M M8 30 mm

1.2

0.70 0.74

2.63

Crank Handles (For Pliers)

Optional or replacement handles forall Strong Hand Tools Pliers.

P/N Thread For Pliers

PXH11 3/8-16 11 Plier sM10 280 mm

PXH6 5/16-18 6, 8-1/2 Plier sM8 215 mm

PXH6

PXH11

Swivel / Pivot Pads (For Pliers)

Flat pads pivot at 150 and roundpad swivels at 360.

P/N Thread Length

854944 (Pivot) 3/8-16 3.2854944M M10 81 mm

854940 (Swivel) 3/8-16 2.6854940M M10 66 mm

854930 (Swivel) 5/16-18 2.6854930M M8 66 mm

854935 (Swive l) 5/16-18 3.1854935M M8 78 mm

3.2

1.73"

2.6

1"

3.1

1"

150 Pivot Swivel

Pliers Replacement Parts

Spring & Adjustment Bolt for Pliers.

P/N For Pliers

PXS11 11 Plier s

PXS6 6 & 8-1/2 Pliers

PXB11 11 Plier s

PXB6 6 & 8-1/2 Pliers

Spring - 4 per setPXS11PXS6

Adjustment Bolt

PXB11PXB6

U-Clamps Replaceable Parts

P/N For U-Clamps Series

XER UE Series

XFR UF Series

XGR UGSeries

XMR2 UM Series (Equipped with H.D. Pad)

XMRP2 UM Series (Equipped with Standard Pad)

XPR UPSeries

Replaceable Arm and Spindle Kits

P/N Description

XMT Spindle for UM Series

XPT Spindle for UP Series

XMAR55-W Clamp Arm for UM Series

XPAR Clamp Arm for UP Series

Individual Clamp Arms and Spindles

P/N Description

XLK For UE, UF, UG & UM series clamps.

Spring Stop Replacement Kit

XMAR55-W

XPAR

XLK

XMT

XPT

7/28/2019 2011 SH + New Pdts


Accessories

Accessories for Utility Clamps, Multi-Purpose Pliers and Expand-O Pliers.

Attach to Expand-O Pliers for widespreading jobs and U-clamps for

Step-Over applications.

P/N L A Expand-O For Clamps

L

A

1/2 NPT

XDJ 1-1/16 5/16-18 PE6, PE62 UD SeriesXDJM 27 mm M8 PE6M, PE62M

XFJ 1-5/32 3/8-16 PE10 UE, UF, UGXFJM 29 mm M10 PE10M UM, UP

Bench Rests (For U-Clamps)

Supports U-Clamp in StandingPosition.


XDU UD Series

XMU2 UM Series

XDU

XMU2

Sidekicks (For U-Clamps)

Mount onto U-Clamps for 2-axishorizontal clamping.

P/N L Stroke For Clamps

XDS 3-1/8 1 UD SeriesXDSM 79 mm 25 mm

XFS 4-3/8 1-3/8 UF SeriesXFSM 111 mm 35 mm

XGS 4-3/8 1-3/8 UG SeriesXGSM 111 mm 35 mm

XMS 4-3/8 1-3/8 UM SeriesXMSM 111 mm 35 mm

L

Extender Blocks (For U-Clamps)

Attach to U-Clamps for Step-Overand Spreading applications.

P/N Thread D L For Clamps

XDB1 5/16-18 3/4 1 UD Series XDB1M M8 16 mm 25 mm

XFB 3/8-16 45/64 2 UE, UF, UG XFBM M10 18mm 51 mm Series

XMB2 3/8-16 1-3/16 2 UM, UP XMB2M M10 30 mm 51 mm Series

D L

Thread

4-IN-1 Packages (For U-Clamps)

P/N V-Pad / Extender Block

XDVB XDV / XDB1 (For UD Models)XDVBM

XFVB XFV / XFB (For UE, UF, UG Models)XFVBM

XMVB XMV / XMB2 (For UM, UP Models)XMVBM

Convert all Utility Clamps into4-IN-1 Clamps. Includes a V-pad,an Extender Block, and a screw.

Extender BlockV-Pad

Screw

Magnetic V-Pads

Tapped For ForP/N Hole Clamps Pliers

XDV2 5/16-18 UD Series PG622 / PG634 M8

XDV4 5/16-18 - - M8

XFV2 3/8-16 UE, UF, UG PG114 / PG134 M10 Series PG204 / PGA20

XFV4 3/8-16 - - M10

Rare earth magnetic V-Pads forholding round and angled pipes.

2 magnets Version(Top only):

XDV2 / XFV2

4 magnets version(Top & Bottom):

XDV4 / XFV4

Magnets Magnets

Magnets

XDV4 & XFV4 are table mount versions.

Top V-Pads (For U-Clamps)



STAINLESS

STEEL

Attach to the top of Utility Clampsequipped with Standard Pads.

Light Duty & Value Series

XDA2 UD Series

XFA2 UE, UF, UG Series

XMA2 UM, UPSeries

XDA2S UD Series

XFA2S UE, UF, UG Series

XMA2S UM, UPSeries

XMA UM, UP Series

XMAS UM, UP Series

Screw-On V-Pads

Attach to the top of Utility Clampsequipped with Heavy Duty Pads.

For Regular and Heavy Duty Series

S.S.

V-Pads (For U-Clamps & Pliers)

Standard V-Pads

Attach to pliers or clamps to holdround and angled workpieces.

Tapped For ForP/N Hole Clamps Pliers

XDV 5/16-18 UD PG622M8 Series PG634

XFV 3/8-16 UE, UF, UG PG114 / PG134M10 Series PG204 / PGA20

XMV 3/8-16 UM , UP -M10 Series

XDVS 5/16-18 UD PG622M8 Series PG634

XFVS 3/8-16 UE, UF, UG PG114 / PG134M10 Series PG204 / PGA20

XMVS 3/8-16 UM, UP -M10 Series

STAINLESS

STEEL

Pipe Adaptors (For Expand-O Pliers)

7/28/2019 2011 SH + New Pdts


Heavy Duty 4 Beam support baseprovides a 2 ton load capacity.

Precision, ground steel plates, with CNCmachined 5/8 holes in a 2 grid pattern forlocating, positioning and holding your fixturewith the BuildPro clamps and components.

Plates can be reconfigured toextend the width of the tablefor larger projects.

Heavy Duty Leveling Feetensure proper leveling of thetable on uneven surfaces.

1-3/4 T-slot spacing

designed for optimumflexibility.

BuildProWelding Tables

The affordable, professional BuildPro Welding Tables

are setting a new standard in price and performance.

The BuildPros modular design gives you the flexibility to adapt to each

new project easily. Youll work more safely, and more efficiently, so youcan increase both your productivity, and the quality of your work.

Insert the clamp intothe T-slot and slidealong the entiresurface for positioningat any point.

Clamp swivels 360.

360 Clamps

BuildPro Clamps

Fit into the 5/8 gridholes for fast andeasy clamping.

Clamp swivels 360.

Inserta-Clamps

Save time and money by holding, positioning, and locating quickly and easily with a wide variety of BuildPro

Clamps and Components. Please visit our website at www.stronghandtools.com for more information or call

us at Toll Free 1-800-989-5244 to request the complete BuildPro Welding Table Catalog.

The table youll rely on everyday...

Faster Fixturing. Consistent Results. Greater Productivity.

7/28/2019 2011 SH + New Pdts

37/38

Valtra Components

Standard Machine Parts and Tooling Components

Toll Free : 800.989.5244 www.valtrainc.com

Cam Action Clamps Forged Adjusta-Clamps Adjustable Handles

HandwheelsRotary T-Slot Nuts Spring Stops

Handknobs Cap Screw Hook Clamps Speed Ball Handles Crank Handles

Clamping Levers Lifting Eyebolts Leveling Pads Heavy Duty Fixed Glides

T-Slot Bolts Rotary T-Slot Bolts Plain Eyebolts T-Strap Bolts

Bedding Supports

Center Cam Clamps

Our Valtra catalog features a wide range of Clamps, Machine Parts, Tooling Components,

and Fasteners. Call to request a copy of the full line catalog. Modifications to standard parts

and custom requests welcome.

7/28/2019 2011 SH + New Pdts

38/38

2011 sh + new pdts

Documents