201127 (27-10)
TRANSCRIPT
![Page 1: 201127 (27-10)](https://reader038.vdocuments.net/reader038/viewer/2022100420/577cbccd1a28aba7118dc864/html5/thumbnails/1.jpg)
8/9/2019 201127 (27-10)
http://slidepdf.com/reader/full/201127-27-10 1/5
PAKISTAN STEEL
MARKETING DEPARTMENT
NO: 2011/27 October 27, 2011
PRICES OF PAKISTAN STEEL PRODUCTS
EFFECTIVE FROM 27.10.2011
Ex-Mill Price in Rs. /Tonne
(Excluding Sales Tax/Excise Duty)
1. BILLETS / BLOOMS
a) Prime
i ) All Grades including SAE 1006, except SUP Series, or as specified below:-
150 x 150mm 58,500
125 x 125mm 58,500
100 x 100 / 105 x 105mm 59,000
90 x 90 / 80 x80 / 75 x 75mm 60,000
65 x 65 / 50 x 50 mm 62,000
ii) Bloom 51,800
iii) Grade SUP 6 & 7
100 x 100 mm 69,200
75 x 75 mm 69,500
iv) Grade SUP 9
100 x 100 mm 70,200
75 x 75 mm 70,500
b) Secondary Billet
i)Prices of All Secondary/Rejected/Off grade/OCB Billets will be Rs. 500 PMT
less than the price of Prime Billets for respective profile and grade.
ii)Grade charges will not apply on Secondary/Rejected/Off grade/OCB Billets.
Extra Charges for special grades of Billets/Ingot Square
a) ASTM A-615, G-60 (Rolled) & NSSR 3,500
b) ASTM A-615 G-60 (Cast), ASTM A-572 G-50 & G-40 (Rolled) 3,100
c) ASTM A-615 G-75 2,800
d) WR-20 and above, SAE 1018, A2AL, SS A 21 2,000
e) ASTM A 706 4,500
f) SAE 1008,1010,WR-8 2,500
2. HOT ROLLED PRODUCTS
a) Hot Rolled Coils - Prime (Mill Edge)
i)All grades except Grade-SG 26/255, Lloyds Grade 'A',
API 5LB up to X-70,RST 37-2CU/1543 and RST 52-3/1543
Upto 2 mm x 1000 / 1220 73,300
Over 2.00 to 2.35 x 1000 / 1220 72,600
Over 2.35 to 3.25 x 1000 / 1220 72,000
Over 3.25 to 3.65 x 1000/1220 72,100
Over 3.65 to 4.00 x 1000/1220/1500 72,000
Over 4.00 to 5.00 x 1000/1220/1500 72,200
Over 5.00 to 6.00 x 1000/1220/1500 72,000
Over 6.00 mm and above 71,400
Note:
http://www.paksteel.com.pk/price_list.html
5 28-10-2011 11:06 AM
![Page 2: 201127 (27-10)](https://reader038.vdocuments.net/reader038/viewer/2022100420/577cbccd1a28aba7118dc864/html5/thumbnails/2.jpg)
8/9/2019 201127 (27-10)
http://slidepdf.com/reader/full/201127-27-10 2/5
![Page 3: 201127 (27-10)](https://reader038.vdocuments.net/reader038/viewer/2022100420/577cbccd1a28aba7118dc864/html5/thumbnails/3.jpg)
8/9/2019 201127 (27-10)
http://slidepdf.com/reader/full/201127-27-10 3/5
Over 1.6 to 1.8 x 915/ 1220 / 950 77,500
Over 1.8 mm and above 76,300
Note:
1Prices of Prime Quality Un-annealed Cold Rolled Products will be@ Rs. 500/= PMT less than the
prices of Prime Quality Cold Rolled Products.
2Prices of Prime Quality Cold Rolled Products(annealed/unannealed) weight less than 2.00 M. Ton
shall be charged @ 1% below the respective thickness-wise prices of prime quality in the specific grade
3Prices of all Secondary-A Cold Rolled products annealed/unannealed shall be charged @ 1% below the
respective thickness-wise prices of Prime quality Grade CR-1.
4Prices of Secondary-A Cold Rolled products annealed/unannealed weight less than 2.00 MTN shall be
charged @ 2% below the respective thickness-wise prices of prime quality Grade CR-1.
5Prices of Secondary-B Cold Rolled Products annealed/unannealed shall be charged @7% less than the
prices of Prime(Grade CR-1) Products in respective dimension and year of manufacture.
6Extras charges irrespective of year of manufacture:
a) for Grades
i) SPCEN 5,500
ii) RST-12.03-Cu3 6,000
iii) CR3 500
iv) CR4 1,000
b) for Shearing 1,500
c) for Slitting 2,000
4. GALVANISED PRODUCTS
a) Galvanised Coils -Prime (all grades)
Upto 0.55 x 915 / 950 / 1220 83,800
Over 0.55 & Upto 0.60 x 915 / 950 / 1220 83,300
Over 0.60 & Upto 0.65 x 915 / 950 / 1220 82,700
Over 0.65 & Upto 0.70 x 915 / 950 / 1220 82,200
Over 0.70 & Upto 0.75 x 915 / 950 / 1220 81,700
Over 0.75 & Upto 0.80 x 915 / 950 / 1220 81,300
Over 0.80 & Upto 0.85 x 915 / 950 / 1220 80,800
Over 0.85 & Upto 0.90 x 915 / 950 / 1220 80,300Over 0.90 & Upto 1.00 x 915 / 950 / 1220 79,800
Over 1.00 & Upto 1.5 x 915 / 950 / 1220 79,400
Over 1.5 mm 78,900
Note:
1Prices of Prime Quality Galvanized Products weight less than, 2.00 M. Ton, shall be charged @ 1%
below the respective thickness-wise prices of prime quality in the specific grade.
2Prices of all Secondary-A Galvanised products shall be charged @ 2% below the respective
thickness-wise prices of Prime quality Grade G-01.
3Prices of all Secondary-A Galvanised product weight less than 2.00 MTN shall be
charged @ 4% below the respective thickness-wise prices of prime quality Grade-G-01.
4Prices of Secondary-B Galvanized Products shall be charged @ 10 % less than the prices of Prime(Grade G-01) Products in respective dimension and year of manufacture.
5. UNSORTED PRODUCTS
Product Code
a) HR 954 Un-sorted End Cuts (HR) 60,200
956 Rejected HR Sheet Un-sorted 62,700
957 Un-sorted Rej. HR Sheet (P and P&O) 60,400
958 Un-Sorted Rej. HR Chq. Sheet 66,100
b) CR 951 Un-sorted End Cuts (CR.A) 59,200
952 Un-sorted End Cuts (CR.T) 62,700
953 Un-sorted End Cuts (CR U) 58,800
961 Un-sorted Annealed Coil 58,000
962 Un-sorted Temper Coil 60,800
964 Un-sorted Un-Annealed Coil 58,000
http://www.paksteel.com.pk/price_list.html
5 28-10-2011 11:06 AM
![Page 4: 201127 (27-10)](https://reader038.vdocuments.net/reader038/viewer/2022100420/577cbccd1a28aba7118dc864/html5/thumbnails/4.jpg)
8/9/2019 201127 (27-10)
http://slidepdf.com/reader/full/201127-27-10 4/5
965 Un-sorted Rej. C.R. Sheet 66,200
c) GP 955 Un-sorted End Cuts (GP) 60,400
963 Un-sorted GP Coil 63,500
6. BY -PRODUCTS
(a)Pig Iron
CPI ( All types incl. off grade CPI-S and imported) 47,700
FPI - 5 / 6 / 5S / 6S / 5HMn / 6HMn/ HSi/ Off Grade 51,000
FPI - 4 / 4S / 4HMn 53,700
FPI - 3 / 3S / 3HMn 53,700
FPI - 2 / 2S / 2HMn 54,700
FPI - 1 / 1S / 1HMn 54,700
Pig Iron Residue 45,250
Pig Iron (Dust) 44,250
Pig Iron Disc Scrap 47,400
(b) Coking Coal 36,000
(c) Hard Coke
1.1 Coke Dust ( 0 - 1 mm ) Bulk in Loose form 11,000
1.2 Coke Dust ( 0 - 1 mm ) Packed in 50 kg Bags 11,300
2. Coke Breeze ( 0 - 25 mm ) 20,000
3. Coke 25 mm upto 80 mm 41,500
4. Over 80 mm 51,500
Note:
Extra charges @ Rs. 200/- PMT for allowing hand picking of Coke size +80mm by labours/workers
deployed by the buyers on their account shall be payable at the time of obtaining Delivery Order(s).
(d) Ammonium SulphateBulk: in loose form 20,000
Packed: in 50 kg bags 20,300
(e) Coal Tar 35,000
(f) Solar Oil 58,500
(g) Slag
Granulated 600
BF Boulder Slag (Left Over) 75
Convertor Slag 750Boulder Slag alongwith HMLR contents 725
(h) Oxygen/Nitrogen (in Cu.m.) 30
(i) HMLR 42,000
(j) Runner Scrap 42,000
(k) Steel Metal Ladle Residue (SMLR) Scrap 36,000
(l) Steel Scrap Retrieved from Converter Slag
i. 0-60mm 15,000
ii. 05-60mm 16,000
iii. 30-60mm 23,000
http://www.paksteel.com.pk/price_list.html
5 28-10-2011 11:06 AM
![Page 5: 201127 (27-10)](https://reader038.vdocuments.net/reader038/viewer/2022100420/577cbccd1a28aba7118dc864/html5/thumbnails/5.jpg)
8/9/2019 201127 (27-10)
http://slidepdf.com/reader/full/201127-27-10 5/5
iv. 60-300mm 25,500
v. Over 300mm 28,000
(m) Mill Scale 14,800
(n) Iron Oxide 17,600
(o) Tar Bonded Dolomite (TBD) Bricks (In all grades/sizes/shapes) 34,000
(p) Chamote Powder
i. 0-3mm 5,900
ii. 0-20mm 5,900
(q) Tundish Well Block CN-42 37,250
(r) Bricks Fire Clay in all sizes & Shapes 19,800
(s) i. Calcined Dolomite (Dead Burnt Dolomite) 13,450
ii. Calcined Lime (Burnt Lime) Size 0-10 mm 5,400
iii. Calcined Lime (Burnt Lime) Size 10-50 mm 5,400
iv. Lime Stone Size 0-20 mm (Ex. BMD Makli Quarries) 110
v. Lime Stone Size 20-50 mm (Ex. BMD Makli Quarries) 700
(t) Mortar 41,000
(u) Burnt Refractory Bricks (Mixed) 11,500
(v) Zinc Dross 98,000
(w) Bulk Hot Metal Skull 39,000
(X) Pressed & Bundled Steel Scrap 37,500
Note:
i) The prices are subject to change without notice.
ii) Items, whose prices have not been indicated in this price list, are not to be offered for sale.
iii) All materials shall be allocated subject to availability.
http://www.paksteel.com.pk/price_list.html