2014 caa catalog

UPGRADE YOUR WEAPON • WWW.COMMANDARMS.COM • [email protected] • 1-866-611-9576 4

5 SECOND CONVERSION

NO PISTOL DISSEMBLY OR MODIFICATION REQUIRED

ALL NFA RULES APPLY

FOR Glock 17,18,19, 20, 21, 22, 23, 25, 26, 27, 31, 32, 34 and 35. Beretta PX4 Storm, M9 and 92, Bul Cherokee, Springfield XD, Jericho, CZ PO7, Sig Sauer 226 and 2022, Bersa 9mm Sig 226 Elite, H&K USP

MODELS COMMING SOON : 1911, S&W M&P, FN 5-7, 229 and more.

RONI PISTOL MODELS:

5 SECOND CONVERSIONA

ll N

FA

Rule

s A

pp

ly C

onta

ct

us

reg

ard

ing

De

part

me

nta

l T&

E P

rog

ram

.

Increased accuracy to 80 yards and beyondConverts a pistol to an accurate carbine in 6 seconds without pistol disassembly or modificationEliminates muzzle riseNo need to carry both rifle and pistol ammunition 9.4” aluminum top rail and aluminum stock shaft provide an aluminum backbone combined with a polymer body to create a strong, durable, and lightweight systemTwo 2.25” aluminum side rails provide mounting points for lights, lasers, and moreA fourth Picatinny rail under the barrel extensionTrigger guard increases safety4 single point sling mountsDesigned for Special Forces and SWAT units, perfect for Motorcycle Officers and SRO. Fiscally responsibleHinged polymer and aluminum carbine frameSecured assembly with two locking pins5 position collapsible stock, with adjustable cheekpieceSpare magazine holder on collapsible stockBarrel shroud can be removed from the stock and replaced with a 1.3” diameter suppressorTwo position detachable folding forward gripOptional brass catcher and folding flip up sightsOptional magnetic vehicle mount

RONIBAGTACTICAL RESPONSE BAG

• Dual zippers with single pull tab

for quick and easy access

• Single strap design allows for both cross body or single shoulder carry

• Three inch wide padded strap with quick release snaps spreads the weight reducing fatigue

Made of: 200 Denier Codura Weight: 19.5 ozDimensions: 20” x 10” x 3.5”

TRANSPORT YOUR RONI

5ALL PRODUCTS ARE BUILT TO LAST OFFERING A LIFETIME WARRANTY AND 100% CUSTOMER SATISFACTION

ONE POINT SLINGSFOLDING FLIP UP FRONT & REAR SIGHTS

FFS / FRS OPS/OPS1PUSH BUTTON SLING

SWIVEL

PBSSRBCF

RONI BRASS CATCHER

SUGGESTED RONI ACCESSORIES

ADVANTAGES

MODELS COMMING SOON : 1911, S&W M&P, FN 5-7, 229 and more.

FOAM LINED HARD CASE

Made of: PolymerDimensions: 23” wide x 13” tall x 4.5 “ deepColor: Black

This super rugged polymer case embossed with the RONI name & logo has room to hold the RONI and all necessary accessories, securely protected inside the egg crate foam lined interior.

• Hinged lid with two latches,• Two thru holes for security locks • Carry handle.

RONICASE

6

The RONI Pistol carbine conversion is now available in a non-NFA model including a 16” threaded barrel and an innovative muzzle shroud. Our new RONI C has a sleek “Bull-Pup” look and includes all the great features of our original RONI without the NFA paperwork.

Available Models: For Glock 17. More models coming soon!

RONI CI V I LIAN

NON NFA RONI MODELS

RONI CIVILIAN FEATURES

• Includes 16” threaded barrel

• Collapsible buttstock with adjustable cheekpiece

• 10” upper flattop Picatinny rail – allows combinations of iron sights, magnifier, red/green dot sights, or night vision

• Two additional 5” Picatinny side rails for lights and lasers

• Includes detachable folding forearm grip on bottom

• Magazine holder on buttstock

• Unique trigger guard for additional safety when moving tactically

• Four mounting points for our Sling Swivel (PBSS), and our One Point Slings (OPS or OPS1)

• Optional flip-up Backup sights (FRS/FFS)

UPGRADE YOUR WEAPON • WWW.COMMANDARMS.COM • [email protected] • 1-866-611-9576

CIVILIAN

7

Fits: For Glock 17,18,19, 20, 21, 22, 23, 25, 26, 27, 31,

32, 34 & 35. Beretta PX4 Storm, M9 & 92, Bul Cherokee,

Springfield XD, Jericho, CZ PO7, Sig Sauer 226, 226 Elite &

2022, H&K USP

*Warning the addition of a stock to the RONI RECON results in the manufacture of a Short Barrel Rifle (SBR) and is subject to NFA RulesWarning the addition of a stock to the RONI RECON results in the manufacture of a Short Barrel Rifle (SBR) and is

subject to NFA Rules

wIThOUT ThE NFA REqUIREMENTSALL ThE RONI ADVANTAGES

ALL PRODUCTS ARE BUILT TO LAST OFFERING A LIFETIME WARRANTY AND 100% CUSTOMER SATISFACTION

RONI RECON RONI RECON FEATURES

• Outfit your Pistol with any type of sights

(Optional flip-up sights FRS/FFS )

• Longer sight radius improves accuracy

• Unlimited sight choice

• Add any optic that fits on a 9.5” rail

• No gunsmithing required

• RONI RECON provides a heads up sight picture

• Improved target acquisition

• Increased stabilization with two handed weapon control

Coming Soon: 1911, S&W M&P, FN 5-7, and 229 and more.

RECON

*Warning the addition of a forward grip to the RONI RECON results the manufacture of an “Any Other Weapon”(AOW) and is subject to NFA Rules.

The RONI Pistol Carbine Conversion Kits allow you to convert various pistols in to a more accurate tactical Short Barrel Rifle (SBR) and will also will provide you with the ultimate platform for expanding capabilities with the addition of a whole host of CAA accessories. The RONI truly makes the tactical SBR practical by allowing configuration as needed to get the job done.

RONI ACCE S SORIE S

EXPAND YOUR RONI’S

OUTFIT YOUR RONI

UPGRADE YOUR WEAPON • WWW.COMMANDARMS.COM • [email protected] • 1-866-611-9576 8All NFA Rules Apply

C A P A B I L I T I E SACCE S SORIE S ThAT MAKE TACTICA L PRACTICA L

ALUMINIUM PICATINNY MOUNT

AL1 - AL34 - AL134

PL1 - PL2PICATINNY FLASHLIGHT ADAPTOR

FFS FRS

PBSS

PLS1q

RBCF

OPS1

ONE POINT SLINGS

OPS - OPS1 PUSH BUTTON SLING SWIVEL

PBSS

PLS1qLOW PROFILE OFFSET LIGHT & LAZER MOUNTS

FFS / FRS FFS / FRSFOLDING FLIP UP FRONT & REAR SIGHT

RBCFRBCFRONI BRASS CATCHER

RONICASE

POLYMER CARRY CASE FOR THE RONI SINGLE STRAP CARRY PACK FOR THE RONI

RONIBAG

RAIL SYSTEMS

U P G R A D E YO U R W E A P O N • W W W. C O M M A N D A R M S . C O M • I N F O @ C O M M A N D A R M S . C O M • 1 - 8 6 6 - 6 1 1 - 9 5 7 6 10

Part: XM4S/XM4SDNuMber of railS: 4

XM4S: ar15/M16 CarbiNe aluMiNuM QuaD railXM4SD: ar15/M16 CarbiNe aluMiNuM QuaD rail reQuireS Delta riNg reMoval

• Four full length rails

• Top rail creates one long monolithic rail with the existing flat top rail

• XM4S has two push button sling swivel mounting points at the front

• XM4SD has four push button sling mounting points at the front and back.

• Slots around the rails provide maximum ventilation around the rails.

• CNC machined from aviation grade aluminum to MIL-1913 standards with a hard anodized black oxide finish for durability and ease of maintenance.

XM4S

XM4SD

Designed to exceed the newest requirements of the US Army for improving zero retention/repeatability. With a new slimmer profile, CAA’s newest Picatinny quad rail improves durability, reliability and maintainability while interfacing with all issued weapon system components.

The XM4S achieves superior zero retention and repeatability, by having the upper three rail section mount underneath the end cap and secured in place with a friction fit ledge and roll pins. The receiver end of the XM4S is secured to the barrel with a barrel nut bracket that is attached to the upper three rail section with four captive flathead screws.The bottom rail uses locking lugs with a retaining pin to keep it securely mounted to upper handguard.

There are two models, with one requiring delta ring removal to provide the most secure retention and zero repeatability.

AR15/M16 PICATINNY q UAD RAI L

XM4S/XM4SD

FEATURED RAIL SYSTEM

• Upper and lower handguard sections interlock, providing the rigidity and stability you need. Solidly mounts to the delta ring and handguard end cap• Bottom rail can mount to front sling mount for additional rigidity if forward sling swivel is removed.• Two quick detachable sling swivel mounting points• First lightweight polymer handguard designed for use with gas piston systems. • Manufactured from a special high temperature resistant polymer• Includes 4 interchangeable rails and heat shields• Two interchangeable bottom rails 4” & 1.75” of Picatinny rail allow for operator to quickly change rails based on mission need• Two 1.75” side rails allow for mounting of lights and lasers while providing a comfortable area to grip the handguard

Made of: Aluminum/Polymer Weight (oz.): 8.9 Width (in.): 2”

Length (in.): 7” Width (in.): 2.625”Height (in.): 2.75”

Part: M4S1 Fits: AR15/M16/M4 Number of Rails: 3

hAND GUARD SYSTEM wITh REMOVABLE RAILS

M4S1

M4S1

ALL PRODUCTS ARE BUILT TO LAST OFFERING A LIFETIME WARRANTY AND 100% CUSTOMER SATISFACTION 11

hANDAR15/M16

CAA’s M4S1 M16/AR15 carbine handguard sets the standard for a stable and rigid design by combining interlocking top and bottom handguard sections with a bottom rail that can be mounted to the existing sling swivel mount for additional rigidity. M4S1 handguard will not move once locked in place, providing repeatable zero. This is the first lightweight polymer handguard designed to withstand the extreme operating temperatures of a gas piston system. This extreme heat resistance is achieved by manufacturing the M4S1 from a proprietary heat resistant polymer, including heat shields and providing significant upper and lower handguard venting. The M4S1 also works with standard direct gas operating systems. The M4S1 includes two interchangeable lower rails of 4” & 1.75” lengths. This allows the operator to quickly change rails based on mission need. The two 1.75” side rails are removable if not required. With the side rails attached, there is enough room left on the contoured handguard to hold it comfortably.


12

Part #: TRM, TRM2, TRM3Fits: M16/AR15/M4 Number of Rails: 1 - 3

Made of: Polymer Weight (oz.): 3 oz Width (in.): 2.75”

Length (in.): 3” Height (in.): 1.5”

TRM: 3” Center Picatinny Rail TRM2: Two 2.5” long 45º Picatinny Rails TRM3: Triple Rail System (TRM and TRM2)

Versatile polymer triple rail mounting system is available as a single 3” Picatinny rail (TRM), two 2.5”, 45˚ Picatinny rails (TRM2), or combined to provide a triple rail mount (TRM3). Use all 3 rails on lower handguards for grip with easy thumb access to light & laser on side rails or use 3” rail on bottom & 2.5” rails on top.

TRM3

TRIPLE RAIL MOUNTING SYSTEMAR15/M16

TRM/TRM2/TRM3

U P G R A D E YO U R W E A P O N • W W W. C O M M A N D A R M S . C O M • I N F O @ C O M M A N D A R M S . C O M • 1 - 8 6 6 - 6 1 1 - 9 5 7 6


• Allows easy tactical light operation while using a vertical grip and light mount

• Rails can be used independently of each other

• 45 ° rails will not interfere with iron sights

• Mounts on the upper and lower vent holes of most existing standard handguards

• Constructed of high density polymer

13

Part: XRS6 Fits: AR15/M4 Number of Rails: 6

Made of: Aluminum Weight (oz.): 11.125 Width (in.): 2”

Length (in.): 9.5” Height (in.): 3”

• Upper rail is the same height as flat top rail • Four 6.25” fixed MIL-STD 1913 rails - provide a solid platform for mounting accessories • Two 2.25” fixed MIL-STD 1913 front sight mini rails allow mounting of lights/lasers • Accepts FR1 forward barrel Picatinny rail to create a 7 rail system • No gunsmithing required

The ultimate rail system for the M4 provides maximum accuracy and stability dur-ing the toughest workout of your weapon. Mounts to front sight. As the barrel heats up and moves, the XRS6 moves with it, holding zero better than any other rail system.

XRS66 PICATINNy HANdGUARd RAIl SySTeM

TRIPLE RAIL MOUNTING SYSTEM


RAIL SYSTEMS AR15 / M16

PRFCSPICATINNy RAIl FOR COllAPSIBle STOCK

PRFCS

PRFCS• Installs instantly on most collapsible stocks

• Rugged fiberglass reinforced high density polymer construction

• Available with adjustable cheekpiece ACP

• 2 1/4” Picatinny rail

• Mounts through sling opening in stock

• Fast and easy installation. Available for left or right handed shooters

Made of: Polymer Weight (oz.): 1 Width (in.): 1.125”

Length (in.): 3.125” Height (in.): 1.75”

Part: PRFCS Fits: M4 Style Collapsible Stock Number of Rails: 1

Part: PRFCS Picatinny Rail for Collapsible StocksPart: PRFCSL Picatinny Rail for Collapsible Stocks (Left)Part: PRFCSACP Picatinny Rail for Collapsible Stocks and Adjustable CheekpiecePart: PRFCSLACP Picatinny Rail for Collapsible Stocks and Adjustable Cheekpiece (Left)

Allows the attachment of our adjustable cheekpiece (ACP), mag holder (MPS), shot shell holder (SSM) and other rail mounted products to existing collapsible stocks.

PRFCSPRFCSPRFCSPRFCSPRFCSPRFCS

PRFCS

FSM15dUAl PICATINNy RAIl/FRONT SIGHT

14 U P G R A D E YO U R W E A P O N • W W W. C O M M A N D A R M S . C O M • I N F O @ C O M M A N D A R M S . C O M • 1 - 8 6 6 - 6 1 1 - 9 5 7 6


FR1 FORwARd BARRel PICATINNy RAIl

Made of: Aluminum Weight (oz.): 1.3

Part : FR1 Weight (oz.): 1.3

Overall Length (in.): 3.75” Width Overall (in.): 1.75” Height (in.): 1.5”

Aluminum multi-position forward barrel rail. Easily mounts to XRS6, XRS6L and FSM15X forward of the front sight, enabling the user to mount a light or laser directly inline above the barrel.

• 2.75” vertical Picatinny rail with seven rail slots• Seven position height adjustment above barrel• CNC aluminum construction• Attaches to XRS6 handguards to create a 7 rail system • Attaches to FSM15X to create a 3 rail front sight system

Front sight mounted rails securely attach to AR15 style front sights.

• Two rails for laser, light and other mounting applications

• Available in aluminum (FSM15X) or polymer (FSM15P) models

• Aluminum model a ccepts Forward Ba rrel Ra il ( FR1) creating a three rail front sight system (XF3)

Part: FSM15X/FSM15PNumber of Rails: 2Fits: M16/AR15/M4/ With A style front sight

Made of: Aluminum/PolymerWeight (oz.): 2.56/1.6 Width (in.): 1.375”

Length (in.): 2.875”Height (in.): 0.875”

XF3FRONT SIGHT TRIPle PICATINNy RAIl

Made of: Aluminum Weight (oz.): 4.2 Width (in.): 1.5”

Part : XF3 Number of Rails: 3Fits: M16/AR15 w/ A style front sights

Overall Length (in.): 5.75” Height (in.): 1.5”

• Enables the secure mounting of light and laser devices on the front sight

• The 3rd rail, located above the barrel has 7 positions for height adjustment

Part: BLM15 Fits: AR15/M16 with Bayonet LugNumber of Rails: 1

Made of: Aluminum Weight (oz.): 1.3 ozWidth (in.): 0.81”


Transforms the bayonet lug into a Picatinny rail section.

BAyONeT lUG MOUNTed PICATINNy RAIl

BLM15l

• Allows the addition of flashlight, laser and other mounts

• No gunsmithing required

Part: BLUMZ1 : Uzi Pistol Bayonet Lug MountPart: BLUMZ2 : Uzi/Mini Uzi Bayonet Lug Mount



15

Part: PR

Fits: M16/AR15/M4

Number of Rails: 1

Made of: Polymer

Weight (oz.): 1.6

Width (in.): 0.8125”

Length (in,): 5.675”

Height (in.): 0.375”



5.6” Picatinny rail can be easily installed on an existing AR15/M16 carbine/rifle handguard.

PICATINNy RAIl FOR AR15 HANdGUARd

PR

• Single Picatinny rail screws into existing vent holes on the handguard

• Fits most handguards

• Excellent for mounting lasers, flashlights, vertical grips, pods and more

Part: SRFits: M16/AR15/M4 Numz Rails: 1

Made of: Polymer Weight (oz.): .64Width (in.): 0.8125”

Length (in,): 1.5” Height (in.): 0.375”

Attach a light or laser to your factory handguard using this mini Picatinny rail attachment

SHORT PICATINNy RAIl FOR AR15 HANdGUARd

SR

• Fits most handguards. Screws into existing vent holes on handguard• 1.5” rail is ideal for light, laser mounts or grips • Constructed of high density polymer• Fast and easy installation

Part: RS58SET

Fits: SA58

Number of Rails: 4

Made of: Polymer

Weight (oz.): 7

Width (in.): 2.5

Length (in,): 6.75”


Polymer two piece handguard for the SA58. Provides a rigid lightweight Picatinny platform.

4 PICATINNy HANdGUARd RAIl SySTeM FOR THe SA58

RS58SET

RS58SET

• 4” upper and 5” lower full length Picatinny rails

• Excellent mounting positions for optics, bipods and grips

• Two removable 2” side rails are ideal for mounting light/laser devices

• Constructed of polymer for strength and heat resistance

Part: RS47SETFits: AK47/74 Number of Rails: 4

Made of: Polymer Weight (oz.): .8Width (in.): 2”

Length (in.): 6.5” Height (in.): 3.25” Rail Lengths Below


RS47SETAK47/74 hAND GUARD SYSTEM

Polymer two piece handguard, provides a rigid lightweight platform to mount Picatinny accessories.


• Two full length upper and lower Picatinny rails provide excellent mounting positions for optics, bipods and grips

• Skeletonized design reduces weight and improves cooling

• Two removable 3” side rails are ideal for mounting light/laser devices

• Available as a complete set (RS47SET) or separately (RS47T) and (RS47B-bottom)

• Constructed of high density polymer for strength and heat resistance

• Compatible with most AK style rifles – including Saiga

SYSTEMYSTEMYSTEMSYSTEMS

RS47SET

Part: RS47TFits: AK47/74 Number of Rails: 1

Made of: Polymer Weight (oz.): 1.6Width (in.): 1.25”

Length (in.): 4.75” Height (in.): 1.5” Top rail: 4.75”

Part: RS47BFits: AK47/74 Number of Rails: 3

Made of: Polymer Weight (oz.): 6.72 Width Max (in.): 2.5”

Length (in.): 5.375” Height (in.): 1.75” Bottom rail (in.): 4.5”

RS47T UPPeR HANd GUARd wITH TOP RAIl RS47B lOweR HANdGUARd wITH 3 RAIlS

MADE IN THE U.S.A.

XRS475 PICATINNy RAIl HANdGUARd SySTeM

XRS47• Securely mounts to weapon, effectively maintaining zero, and increasing accuracy under the most demanding conditions

• Allows disassembling/assembling the AK, without rail removal, maintaining perfect zero

• Rear rail is specifically designed for heavy optics

• Three piece modular system, can be used individually or in conjunction with each other

• Compatible with most AK style rifles

The world’s first five rail system for the AK47/AK74. Five fixed rails, provide an exceptional design that allows secure mounting of numerous mission specific accessories, including bipods, vertical grips and large optics

The full combination of all three parts (total of 5 rails) – Provides the best solution for mounting heavy optics, grips, lights, lasers, pods, scopes, red point sights and other mounts.

Part: XRS47Fits: AK47/74 Number of Rails: 5

Made of: Aluminum Weight (oz.): 15.36 Width (in.): 2”

Length (in.): 15” Height (in.): 3.625“

Rail Lengths: Bottom: 4.5”Right Side: 4.125”Left Side: 2.5”Top Front: 5.875”Top Rear: 5.75”

The lower section (total of 3 rails) provides the solution for mounting grips, lights, lasers, pods and other accessories.

3 PICATINNy RAIl HANdGUARd SySTeMXRS47B

Fits: AK47/74 Number of Rails: 3

Made of: Aluminum Weight (oz.): 6.4 Width (in.): 1.25”

Length (in.): 7”Height (in.): 2.125”


RAIL SYSTEMS AK47/74

XRS47

SYSTEMS AK47/74

The combination of the lower and top rear sections provides a total of 4 rails for mounting grips, lights, lasers, pods, scopes, heavy optics, red dot sights and other accessories.

4 PICATINNy RAIl HANdGUARd SySTeMXRS47BR

Fits: AK47/74

Number of Rails: 4

Made of: Aluminum

Weight (oz.): 10.88

Width (in.): 2”

Length (in.): 13.25”


The combination of the lower and top rear sections provides a total of 4 rails for mounting grips, lights, lasers, pods, scopes, heavy optics, red dot sights and other accessories.

4 PICATINNy RAIl HANdGUARd SySTeMXRS47BT

Fits: AK47/74

Number of Rails: 4

Made of: Aluminum

Weight (oz.): 9.92

Width (in.): 1.75”

Length (in.): 9”



BUTTSTOCKS / ChEEKPIECES

SKBS - AR15/M16 carbine skeletonized buttstock ACPS - Adjustable cheekpiece for skeletonized buttstockSKBPM - Buttpad with monopod for skeletonized buttstockSKBP - Thick skeletonized buttpad with thickness adjustment and recoil reduction

• Unique and secure locking system allows the operator to set the optimal stock length and then lock it in place so it will not inadvertently change during operations.

• Rugged, lightweight polymer stock can be changed to meet specific conditions or operations.

• Optional storage compartment is removable if not needed

• Optional battery storage compartment is removable from the storage compartment.

• SKBP The optional thicker, spring loaded, recoil reducing butt pad molds itself to the contours of body armor.

• SKBPM An optional butt pad with a self-contained monopod provides stability with a forward bipod in target situations

• ACPS Optional adjustable cheekpiece can be mounted providing a comfortable and sturdy rest to improve accuracy.

Part: SKBS Fits:AR15/M16



AR15/M16

SKBS AASKE LETONIzED BUTTSTOCK

This versatile stock fits both commercial and Mil-Spec tubes. Complete with a rubber butt pad for CQB operations.

FEATURED BUTTSTOCK

SKBS


AR15/M16

CBS - Collapsible StockCBSM - Collapsible Stock for MIl-SPeC TubesCBST - Collapsible Stock w/ Tube AssemblyCBS + ACP - Collapsible Buttstock and Adjustable Cheekpiece

• Ambidextrous side compartment with snap tight latch provides waterproof storage for 4 CR123 batteries

• Side Picatinny rail allows addition of Adjustable Cheekpiece (ACP) or Mag Holder (MPS)

• Non-slip rubber buttpad with tapered angle, allows faster shouldering and increased comfort with body armor & more secure positive shoulder purchase

• 2 ultrasonically welded metal quick release sling mounting points in addition to standard sling mounts provide quick sling attachment and release

• Available with tube assembly including: Receiver extension, recoil buffer, spring, locking ring, and receiver plate

• Ergonomic adjustment lever included for quick, comfortable length adjustment

Part: CBS Fits:AR15/M16



AR15/M16/M4 CARBINES

CBS COLLAPSIBLE BUTTSTOCK

Upgrade your standard collapsible buttstock with our innovative feature packed, six-position collapsible stock. Increase your comfort, control, storage, and mounting options.

FEATURED BUTTSTOCK

CBS

CBS SHOWN WITH (ACP) ADjUSTABLE CKEEKPIECE. SEE PAGE 26



ARS: Sharp Shooting StockARSNL: Sharp Shooting Stock (No Leg)

Part: ARSFits: AR15/M16, Carbine

Made of: Polymer/Alum Weight (lb): 1.95

Horizontal Adj. : 2.25 inLength of Pull: 9-11.5 in

Vertical Cheek Adj: 1.5 in Vertical Butt Plate Adj: 2.25 in Leg Length: 3.5-7.25 in

Part: SRS Fits: AR15/M16

• 10 position push button adjustable length of pull of stock • Quick release extendable leg has a course and fine push button height adjustment plus a knurled micro height adjustment ring. • Cheek rest is fully adjustable for height, with knurled knob controlling a spring loaded mechanism to raise the cheek piece height. • Cheek piece length can be set at any of 13 click locking positions controlling eye relief adjustment • Vertically adjustable rubber butt pad • Leg locks in 3 positions: 0˚, 45˚, and 90˚ • 2 quick release sling mount points

The result of years of research and development. Designed in conjunction with special units of the IDF (Israel Defense Force) this sniper stock is ideally suited to meet the demands of the precision marksman community. Proven to provide rapid target acquisition, faster and more accurate follow up shots, and quicker target-to-target attainment. Completely adjustable, featuring a folding rear leg that converts an A2, A4 or SR25 rifle with a bipod into a stable shooting platform. Pat Pending.

SRSAdvANCed SNIPeR STOCK AR15/M16

• 10 position push button adjustable length of pull of stock. • Leg locks in 3 positions: 0˚, 45˚, and 90˚ • Cheek piece length can be set at any of 13 click locking positions controlling eye relief adjustment • Cheek rest is fully adjustable for height, with knurled knob controlling a spring loaded mechanism to raise the cheek piece height. • 2 quick release sling mount points • Vertically adjustable rubber butt pad • Quick release leg extension with a course and fine push button height adjustment and a knurled micro height adjustment ring

Specifically engineered for the Designated Marksman. The ARS allows the user to provide rapid accurate fire. Shorter length specifically designed for M4 carbine and similar collapsible tubes.

ARSAdvANCed SHARP SHOOTING STOCK AR15/M16

FEATURED BUTTSTOCKS

SRS: Sniper Stock

SRSNL: Sniper Stock (No Leg)

AR30SA: Sniper Stock Adaptor for Armalite AR30

Made of: Polymer/Alum Weight (lb): 2.05

Horizontal Adj. : 2.25 inLength of Pull: 11-14.5 in

Vertical Cheek Adj : 1.5 in Vertical Butt Plate Adj: 2.25 in Leg Length: 3.5-7.25 in

SRS

ARS

Part: CP1Fits: AR15/M16 stocks

Made of: Polymer Weight (oz.): 1.875

Length (in.): 3.8” Height (in.): 2.12” Width (in.): 1.875”

Part: CP2Fits: M16 stocks


Length (in.): 5”Height (in.): 2.5”Width (in.): 1.875”

The CP1 raises eye level for proper alignment of optics. While the CP2 raises eye level for proper alignment of iron sights. CP set includes both the CP1 and CP2.

CP2 - 1.25” rise

CP1 - .7” rise

ChEEK RESTS FOR COL LAPSIBLE STOCKS

CP1/CP2/CP

FEATURED ChEEK RESTS

• Provides a comfortable cheek weld for use with optics or iron sights• Installs instantly on most collapsible stocks • No tools required, snaps into place• Made of rugged fiberglass reinforced polymer to withstand harsh tactical conditions• Can be positioned along length of stock to provide optimal eye relief• Fits most AR15/M16 collapsible style stocks with fins


AR15/M16

Part: CPS Set of CP1 and CP2 Fits: M16 stocks

Part: ACP Fits: AR15 Style buttstocks

Made of: PolymerWeight (oz.): 3.6 Width (in.): 2.75”

Length (in.): 4.5”Height (in.): 2.5 - 3.5”

• A proper cheek weld allows for quicker target acquisition and comfort• Securely attaches to most collapsible stocks with supplied hardware• Made from fiberglass reinforced polymer for strength and functionality• Waterproof, sealed battery compartments hold four AA, six CR123 batteries, or .223 cleaning kit• SST3 provides cut out for top sling mount

Stock Saddle provides a proper cheek weld for AR15 and similar collapsible stocks at an affordable price. Easily installs onto M4 style stocks.

SST1 / SST3COllAPSIBle STOCK SST1/SST3

• Adjustable for height with thumb knob

• Allows proper eye relief of scoped rifles by moving horizontally along collapsible stock

• Ambidextrous design

• Manufactured from durable polymer with smooth finish

• Compatible with most existing AR15 carbine style buttstocks with the use of PRFCS

Fully adjustable cheekpiece designed to mount on the CBS collapsible stock’s Picatinny rail or PRFCS with rail for existing collapsible stocks. Pat Pending.

ACPAdJUSTABle CHeeKPIeCe

FEATURED ChEEK RESTS

SST3

24

Part: SST1/SST3Fits: AR15/M4 Style Stocks

Made of: Fiberglass reinforced PolymerWeight (oz.): 2.3 Width (in.): 2.625”


SST1 : Collapsible Stock Saddle SST3: Collapsible Stock Saddle w/ top sling mount cutout

ACP

SST3 SST3 SST3


MARS : AK47 Milled Receiver Sharp Shooting Stock

MARSNL : AK47 Milled Receiver Sharp Shooting Stock (No Leg)

SARS : AK47 Stamped Receiver Sharp Shooting Stock

SARSNL : AK47 Stamped Receiver Sharp Shooting Stock (No Leg)

Part: MARSFits: AK47 stamped or milled recieverNumber of Rails: 4

Made of: Polymer Weight (lb): 1.95

Horizontal Adj : 2.25 inLength of Pull: 9-11.5 in

Vertical Cheek Ad.: 1.5 in Vertical Butt Plate Adj: 2.25 in Leg Length: 3.5-7.25 in

AK47 ShARP ShOOTING STOCK

• 10 Position push button adjustable length of pull of stock • Vertically adjustable rubber butt pad • Quick release extendable leg has a course and fine push button height adjustment plus a knurled micro height adjustment ring. • Cheek rest is fully adjustable for height, with knurled knob controlled, spring loaded mechanism to raise the cheek piece height • Cheek piece length can be set at any of 13 click locking position controlling eye relief adjustment • Leg locks in 3 positions: 0˚, 45˚, and 90˚ • Available with or without leg • Includes AKTS or AKTM aluminum AK stock tubes • 2 quick release sling mount points

AK47/74

MARS/ SARS The result of years of research and development. Designed in conjunction with special units of the IDF (Israel Defense Force) this sniper stock is ideally suited to meet the demands of the precision marksman community. Proven to provide rapid target acquisition, faster and more accurate follow up shots, and quicker target-to-target attainment. The MARS/SARS stock allows the user to provide enhanced rapid accurate fire. Shorter length specifically designed for collapsible tubes. Available for milled (MARS) and stamped receivers (SARS).

FEATURED BUTTSTOCK

MARS - SARS


AKTSCBS

AKTMCBSAKTMPCBS

AKUFSACBS

AKTSPCBS

• Available for milled, stamped and underfolding receivers

• Aluminum buffer tubes provide sealed storage area for a cleaning kit or small items

• Stock angle is higher, flatter for higher cheek weld, providing increased accuracy

• Side snap-tight latch compartment provides storage for 4 CR123 batteries

• Provides longer length of pull than standard AK stock

• Side Picatinny rail allows addition of Adjustable Cheek Piece (ACP)

• Rubber non-slip buttpad with tapered angle, allows faster shouldering and increased comfort with body armor

• 2 ultrasonically welded metal quick release sling mount points

AK47 COLLAPSIBLE STOCK KITS

AK47 COLLAPSIBLE BUTTSTOCK KITSUpgrade your AK47 buttstock with an innovative, six-position collapsible stock. Sling mounting points on all models except (AKUFSACBS)

AKTSCBS: AK47 Collapsible Stock with Aluminum Tube for Stamped Receiver

AKTSPCBS: AK47 Collapsible Stock with Polymer Tube for Stamped Receiver

AKTMCBS: AK47 Collapsible Stock with Aluminum Tube for Milled Receiver

AKTMPCBS: AK47 Collapsible Stock with Polymer Tube for Milled Receiver

AKFUSACBS: AK47 Collapsible Stock with Aluminum Tube for Underfolding Stock


AKTM

AKTMP

AKUFSA

AKTS AKTSPAKTMPAKTMP

AK47 COLLAPSIBLE TUBES

• Allows installation of M4 carbine style collapsible stocks

• Stock angle is higher, flatter for higher cheek weld

• Aluminum models feature internal sealed storage for cleaning kit or small items

• All models have ambidexterous sling mounts except, underfolding model

• Available in aluminum or polymer models

• Provides longer length of pull than standard AK stock

AK47 COLLAPSIBLE TUBES

AKUFSA: 6 Position Aluminum Tube for AK47 Underfolding Stock AKTM: 6 Position Polymer Tube for AK47 Milled ReceiverAKTMP: 6 Position Polymer Tube for AK47 Milled Receiver

AKTS: 6 Position Aluminum Tube for AK47 Stamped Receiver AKTSP: 6 Position Polymer Tube for AK47 Stamped Receiver

Six position collapsible tube with storage for AK47. Sling mounting points on all models except (AKUFSA)



MAGAzINE MANAGEMENT


POLYMER .223 MAGAzINE

.223 POLYMER MAGAzINE

• High impact polymer 30 round .223 magazine• Non-tilting follower• Corrosion resistant stainless steel spring• 100% reliability• Lightweight and rustproof• Reduced noise

AR15/M16

MAGMAG polymer magazine provides flawless functionality.

Contoured interior prevents jams and misfeeds by keeping individual rounds in the proper position.

Along with a non-tilting stainless steel spring provide 100% reliability.

POLYMER 30 ROUND MAGAzINE

MAG

Part : MAG Fits: .223/5.56 AR15/M16Length (in.): 2.875”Width (in.): 1.25”

Made of: Polymer Weight (empty, oz.): 5.76Height (in.): 7.5”



FUL L MAG INDICATOR BUTTON

wINDOw INDICATOR

.223 POLYMER 30 RND MAG wITh wINDOw

• A clear window on the side of the magazine provides the operator with a visual ind icator of the number of remaining rounds • A white full mag indicator on the bottom of the magazine pops out providing a tactile indicator during low light or night conditions• Polymer body reduces noise• Includes dust cover• High impact polymer 30 round .223 magazine• Non-tilting follower• Interior of magazine is perfectly formed to the shape of the round preventing jams and misfeeds• Counting system does not interfere with disassembly or reduce capacity

AR15/M16

MAG17CAA’s Clear Action Magazine. This unique magazine provides both a clear window on the side showing the number of rounds remaining in the magazine and a full magazine indicator button on the bottom. The clear window on the magazine side allows the user to easily view the number of rounds remaining, corresponding to the numbers stamped into the body. In addition a white full magazine indicator on the bottom pops out of the magazine base, providing a tactile indicator of a fully loaded magazine during low light or night operations. The full mag indicator can be preset to pop out at either 29 or 30 rounds by adding or removing the follower extention.

Part: MAG17Fits: .223/5.56 AR15/M16Length (in.): 2.875”Width (in.): 1.25”


CLEAR ACTION MAGMAG17



.223 POLYMER 30 RND COUNTDOwN MAG

• High impact polymer 30 round .223 magazine• Interior of magazine is perfectly formed to the shape of the round preventing jams and misfeeds• Non-tilting follower• Corrosion resistant steel spring• Color coded visual indicator on back of magazine shows the number of remaining rounds • Counting system does not interfere with disassembly or reduce capacity• Polymer body reduces noise

AR15/M16

CDMAGThis unique magazine provides a visual indicator showing the exact number of remaining rounds in the magazine. The visual indicator has a colored background for easier and quicker round determinations, 30 - 21 rounds show a green background, 20 -11 rounds show a yellow background and 10 - 0 rounds show a red background. The visual indicator can be viewed without losing the sight picture. A second window on the bottom of the magazine allows the operator to instantly select a loaded magazine from the pouch.

To make a 100% reliable polymer magazine, we start with a magazine body made from a high impact polymer strong enough to be run over by a truck and still function. The interior of the magazine body is formed with contours in the shape of the round to prevent jams and misfeeds. A non-tilting follower and stainless steel spring produces a magazine you can count on for 100% reliability. With the round counting windows showing you the remaining rounds at a glance, you now have a superior design, executed flawlessly, resulting in your tactical advantage.

COUNTDOwN wINDOw

ALWAYS KNOW HOW MANY ROUNDS REMAIN

Part: CDMAG Fits: .223/5.56 AR15/M16Length (in.): 2.875”Width (in.): 1.25”


CDMAG



.223 POLYMER 10 AND 20 RND MAGS

• High impact polymer 10 or 20 round .223 magazine• Interior of magazine is perfectly formed to the shape of the round preventing jams and misfeeds• Non-tilting follower• Corrosion resistant steel spring• Polymer body reduces noise

AR15/M16

MAG10, MAG10w & MAG20 LIVEThe MAG10 is a 10 round .223 polymer magazine designed specifically for users who do not require 10 rounds or the extra length and weight of a 30 round magazine.

The MAG20LIVE is a 20 round .223 polymer magazine designed specifically for users who do not require 30 rounds or the extra length and weight of a 30 round magazine.

Our newest Clear Action window magazine, the MAG10W is our Clear Action 30 round magazine plugged to reduce capacity to 10 rounds for those states and jurisdictions with magazine capacity limits while allowing the operator all the reliability of our 30 round Clear Action Window magazine.

Part : MAG10W Fits: .223/5.56 AR15/M16Length (in.): 2.875” Height (in.): 7.5” Width (in.): 1.25”

Made of: Polymer Weight (oz): 5.76

MAG10w

MAG10 w

MAG20 LI V E MAG20 LIVE

Part : MAG20LIVEFits: .223/5.56 AR15/M16Length (in.): 2.875”Height (in.): 5.5” Width (in.): 1.25”


MAG10

MAG10

Part : MAG10 Fits: .223/5.56 AR15/M16Length (in.): 3.75 Height (in.): .75” Width (in.): 2.375”



.223 POLYMER 10 AND 20 RND MAGS .223 POLYMER BLANK MAGAzINE

• High impact polymer 30 round .223 magazine• Non-tilting follower• Corrosion resistant stainless steel spring• 100% reliability• Lightweight and rustproof• Reduced noise

AR15/M16

MAG20BLK, MAG30BLKThese magazines are designed specifically for Military, Law Enforcement training scenarios.

The Blank Fire magazines utilize an innovation design first requiring the installation of an insert into the magazine well of the AR15/M16. (no gunsmithing required). Once the insert is installed, the firearm will no longer accept magazines with live ammo, only our specific, reduced opening Blank Fire magazines. The Blank Fire magazines eliminate safety concerns regarding the accidental use of live ammunition during training exercises.

Available in .223 20 or 30 round capacity.

MAG30BLK

MAG20BLK

Part: MAG20BLK Fits: .223 Blank Cartridges Capacity: 20 Rounds

Part: MAG30BLK Fits:.223 Blank Cartridges Capacity: 30 Rounds

Weight (oz): 5.8 ozMade of: Polymer2.875” L x 7.5” H x 1.25 W

Weight (oz): 4.2 ozMade of: Polymer2.875” L x 5.625” H x 1.25W

MCD16, MC16N, MC16


AR15 MAGAzINE COUPLERS

small pouch pull

MC16N

MCD16, MC16N, MC16.223 POLYMER MAG COUPLERS

• NEW AR15/M16 magazine coupler can be used with or without mag height regulator pouch pulls• Large and small removable pouch pulls, automatically stagger the magazines to the correct height, so they don’t interfere with the ejection port• Now with 3 screw tightening for extra rigidity• Robust design with thicker walls provides more resistance to breakage

AR15/M16

CAA’s new and improved magazine coupler now comes with both small and large removable pouch pulls. The pouch pull automatically sets the height of the magazines, so they don’t interfere with the ejection port. The MC16N’s robust design with thicker walls provides more resistance to breakage. Based on the proven clamping design, the MC16N now has three adjustment screws for additional strength. The MC16N joins the CAA family of magazine couplers, along with the MCD16 for polymer AR15/M16 30 round magazines and the MC16 for aluminum 30 round magazine.

The MCD16 has been redesigned from a blank piece of paper, making it more robust, durable and user friendly, featuring a spring loaded design allowing easier insertion of the magazines, captive nuts to eliminate loss during use in the field and a contoured surface for a sure grasp.

Part: MC16N Fits: AR15/M16 Aluminum 30 Round MagazineLength (in.): 3”Width (in.): 2.3”

Made of: Polymer Weight (lb.): 0.09


Part : MCD16 Fits: AR15/M16 Polymer 30 round magazinesLength (in.): 2.5” Width (in.): 2.875”Heigh (in.): 2”

Part: MC16 Fits: AR15/M16 Aluminum 30 round magazinesLength (in.): 2.5” Width (in.): 2.875”Heigh (in.): 2”


large pouch pull

MCD16

MC16

MC5

.223 POLYMER MAG COUPLERS XRS47

35

CAA Is following the success of their redesigned AR15/M16 magazine coupler for

polymer magazines, the MCD16, with the redesign of their full line of mag couplers. All

models have been redesigned from a blank piece of paper, making them more robust,

durable and user friendly, featuring a spring loaded design allowing easier insertion of

the magazines, captive nuts to eliminate loss during use in the field and a contoured

surface for a sure grasp. The new models include magazine couplers for 7.62 x 39

AK-47 magazines, H&K MP5 9mm magazines and UZI 9 mm magazines.


XRS47CO UP LERS FOR AK47, MP5, UzI

MAGAzINE COUPLERS

MAGAzINE COUPLERS

Part: MC47 AK47 Polymer Magazine Coupler/2.5”: H x 3”W x 2.5L/ 3.5oz

Part: MC5 Polymer Magazine Coupler/2”: H x 2.75”W x1.5L/ 2.2oz

Part: MCUZI 9mm/ Polymer Magazine Coupler/2”: H x 1.5”W x2.375L/ 1.9oz

MCUzIMCUzMCUzMCU IMC47


MAGAzINE MANAGEMENT

• Ideal for use with our CBS collapsible stock or PRFCS Picatinny rail for existing collapsible stocks

• No straps to contend with, MPS magazine holder retains mag firmly while allowing removal with the touch of a finger on the ergonomic lever

• Fully ambidextrous design, accepts M16/AR15 style aluminum magazines

• Can be belt mounted using RC1/RC2 belt clip

• High density polymer construction

AR15/M16 PICATINNy MAGAzINe HOldeRMPS

Attaches securely to existing AK mag release with 2 set screws for 1 finger magazine removal

AK47 MAGAzINe ReleASe eXTeNSION

AKMR

• Provides a larger surface area to release magazine• Wraps around trigger guard for easy access• One finger magazine release

Made of: Polymer Weight (oz.): .64

Part: AKMR Fits: AK47/74


• Picatinny rail for existing collapsible stocks Picatinny rail for existing collapsible stocks

• firmly while allowing removal with the touch of a finger on the ergonomic lever

• aluminum magazines

•

•

Magazine loader for .223 cal / 5.56 mm ammunition. Designed to easily load magazines with speed and efficiency

AR15/M16 MAGAzINe lOAdeR

ML556

• Lightweight and compact design• Thumb lever easily loads each round• Works with M16/AR15, Ruger Mini-14 and similar .223 magazines

AR15/M16 magazine holder clamps onto any Picatinny rail allowing the operator to position a spare magazine for quick access, reducing loading time

Part: MPS Fits: AR15/M16

Made of: PolymerWeight (oz.): 2.1 Width (in.): 1.5”

Length (in.): 4”Height (in.): 3”

MAGAzINe dUST COveRDC

DC1: Single .223 Magazine Dust CoverDC2: Two .223 Magazine Dust CoversDC4: Set of Four .223 Magazine Dust CoversDC10: Set of Ten .223 Magazine Dust Covers

Rubber dust cover for AR15/M16,.223 magazine. Fits securely over top of magazine

Part: DC1, DC2, DC4 Fits: .223/5.56

Made of: Rubber Weight (oz.): .32

Length (in.): 2.625” Height (in.): .75”Width (in): 1.125”


Part: ML556Fits: .223 AR15 Mags

Length (in.): 3.25” Height (in.): 3” Width (in.): 1.375”

37

GRIPSALL PRODUCTS ARE BUILT TO LAST OFFERING A LIFETIME WARRANTY AND 100% CUSTOMER SATISFACTION

• Finger grooves for increased control, especially under adverse conditions• Captive thumbnut can’t be lost. Provides quick and easy installation without tools to Picatinny rail• Finned design reduces weight and dissipates heat.• Two removable pressure switch mounting covers• Securely attaches to any Picatinny rail• Plugged cap provides waterproof battery storage • Side rails assist in guiding magazine into well

MGRIP1

MGRIP

Part: MGRIP Fits: Picatinny Rail


Length (in.): 3.25”Height (in.): 3.25” Width (in.): 1.6”

• Curved design provides a comfortable grip

• Securely attaches to any Picatinny rail

• No tools necessary for installation or removal

• Captive thumbnut can’t be lost. Provides quick and easy installation without tools to Picatinny rail

Part: MGRIP1 Fits: Picatinny Rail



eRGONOMIC CQB GRIP

• 2 piece design clamps around magazine well, Picatinny rail not required

• Features finger grooves

• Removable pressure switch mounting cover

MAGAzINe well eRGONOMIC CQB GRIP MGRIP2

Part: MGRIP2 Fits: M16/AR15


Length (in.): 4.375”Height (in.): 2.5”Width (in.): 1.5”

•••• •• •

M

Part: Fits:

Part:Fits:

eRGONOMIC

DESIGNED FOR CqB SITUATIONSGrip’s close proximity to the magazine well allows the operator to utilize a shorter arc of movement. during room clearing operations, short arc of movement provides a quicker response to potential threats. Magazine well grips increase safety and reliability by reducing the chance of a misfeed or jam caused by contact with the magazine. Reduces the chance of operator injury due to a round failure in the AR15. Provides a safe and comfortable method of firearm control under all conditions. These magazine well grips provide more control during firing while reducing fatigue. NTOA approved.


MAGAzINE wE LL GRIPS

CURved CQB MAGAzINe GRIP

Grip’s close proximity to the magazine well allows the operator to utilize a shorter arc of movement. Grip’s close proximity to the magazine well allows the operator to utilize a shorter arc of movement. Grip’s close proximity to the magazine well allows the operator to utilize a shorter arc of movement.

Made of: Polymer/RubberWeight (oz.): 3.84


• Incorporates a no tool screw cap storage compartment

• Rubberized front and back panels for comfortable non-slip grip surface

• Dual removable pressure switch mounts


MVGSHORT veRTICAl GRIP

Polymer and rubber forward grip with rubberized front and back panels and pressure switch mounts. Compact vertical forward grip puts the user in a comfortable fighting stance. No tools required.

Part: MVG Fits: Picatinny Rail


VERTICAL GRIPS

MVG

EVG

Made of: Polymer/RubberWeight (oz.): 3.84


• Mounts on Picatinny rail

• Provides natural fighting stance

• Rail lug prevents any forward or rearward movement

• Skeletonized design reduces weight

• Rubberized back for comfortable grip surface

• No tools required screw cap storage compartment holds batteries or other small items like firing pins, etc.

• Checkering on finger groove provides added control


evgeRGONOMIC veRTICAl GRIP

Polymer and rubber forward grip with checkered finger grooves and rubberized backstrap. Provides a fighting stance, controlled operation & comfortable carry.

Part: EVGFits: Picatinny Rail


MAGAzINE wE LL GRIPS

FVG55 PoSITIoN FoLDING FoREARM GRIP

40

FVG5

• Side push button, allows operator to switch between different grip positions

• Grip is available when needed and folds out of the way when the forward grip is not required

• A plugged storage compartment

• Screw-down clamp-locking system securely locks on rail

Molded polymer two, three or five position folding grips.

Part: FVG5 Fits: Picatinny Rail


Length (in.): 4.5” FoldedHeight (in.): 4.75” Fully ExtendedWidth (in.): 1.75”

FVG5

SVGSHORT FOReARM veRTICAl GRIP

• Compact, curved cylinder design

• 6 ring grooves for operator control

• Screw-down clamp-locking system securely locks on rail

• Incorporates a storage compartment

Part : SVGFits: Picatinny rail



Polymer forward grip

TVG TVG1

• New contoured shape provides comfort

• Both grips offer a plugged storage compartment

• Compact and lightweight

• Screw down clamp locking system for secure mounting to any Picatinny rail

• Short grip provides grasping surface without snagging on objects

TVG TVG1TVG TVG1TVG TVG1THUNdeR veRTICAl GRIP Ergonomic polymer three finger and three + 1 finger forward grip



Part: TVGFits: Picatinny rail


Part : TVG1Fits: Picatinny rail


CGRIPeRGONOMIC FOReARM GRIP

• Finger grooves for secure operator grip

• Screw cap storage compartment

• Includes (PGS) removable pressure switch mount.

• Captive thumbnut can’t be lost. Provides quick and easy installation without tools to Picatinny rail.

Comfortable forward grip with finger grooves and palm rest

Part : CGRIPFits: Picatinny rail

Made of: Polymer Weight (oz.): 4


BVGFORARM veRTICAl GRIP

Part: BVGFits: Picatinny rail



• Attaches to rail utilizing a twist tightening design• Waterproof storage for 3 CR123 batteries• 7 Ring grooves provide operator control and prevent hand slippage under moist conditions• No tools required

Quick detach, molded polymer vertical grip with battery storage

F LA S h LIG hT GRIP ADAPTOR

Combines light mount and vertical grip into one unit putting operator in a fighting stance while identifying and engaging targets. Eliminates rail clutter. Accommodates 1” push button end cap lights. High Density Polymer.

• Thumb activation eliminates sympathetic response of trigger finger designs providing safer operation under stressful conditions

• Side safety switch prevents inadvertent activation of the light during covert activities

• Storage compartment with a screw cap base holds small cleaning kit or extra batteries

• Rubber pressure switch covers and inserts allow for customized pressure switch sizing

• 1.5” Picatinny rail is included; attaches to either side, or bottom of mount, for the addition of a laser

• Storage compartment includes a foam plug to eliminate rattling & noise

• Captive thumb nut can’t be lost. Provides quick and easy installation to Picatinny rail without tools

Part: FGA Fits: Picatinny Rail

Made of: PolymerWeight (oz.):9 Width (in.): 2”


FGA

RAI L MO UNTED F OR wARD GRIPS


FGA


REPLACEMENT PISTOL GRIPS

Part: UPG16Fits: AR15/M16

Made of: Polymer/Rubber Weight (oz.): 3.7


M16 AR15 PISTO L GRIP

• Provides increased control during firing and reduces fatigue• Finger grooves, palm swell and contoured backstrap provide for an increased powerful grip• 3 easily interchangeable front and rear rubberized grip inserts mount securely in place• Capped storage for small items or an optional cleaning kit

UPG16 Improve comfort and control with this pistol grip, with six interchangeable inserts. It easily replaces standard grip, includes three finger grooves and three palm swell inserts, allowing the operator to customize their grip to fit all hand sizes.

UPG16

WITH INTERCHANGEABLE FINGER GRooVES & BACK STRAPS

WITH 6 INTERCHANGEABLE FINGER GRooVES & BACK STRAPS

MADE IN THE U.S.A.


UPG16

REPLACEMENT PISTOL GRIPS

AK47 PISTOl GRIP UPG47

• Provides increased control during firing and reduces fatigue and slippage when wet• 3 changeable finger grooves and palm swell provide for an increased powerful grip• 3 easily interchangeable front and rear rubberized grip inserts mount securely in place• Capped storage for small items

WITH INTERCHANGEABLE FINGER GROOVES & BACK STRAPS

UPG47

Part: UPG47Fits: AK47

Made of: Polymer/Ruber Weight (oz.): 3.7


MADE IN THE U.S.A.

MADE IN THE U.S.A.

G47

• Increases comfort and weapon performance• Provides more control and surface area during firing while reducing fatigue and slip page when wet• Finger grooves and palm swell provide for powerful grip• Storage compartment with snap cap in base for small item storage

• Replaces the original grip in moments

Tactical pistol grip for the AK47

eRGONOMIC PISTOl GRIP

Part: G47Fits: AK47/74



UPGSTARGeT SHOOTING STANd

• Constructed of high density polymer

• UPG grip sold separately

Provides a solid platform for hand support during sustained target exercises. Flat surface helps stabilize and support rifle. Stand snaps into UPG style grips.

Part: UPGSFits: UPG GRIPS



G16eRGONOMIC PISTOl GRIP

• Provides more control and surface area during firing while reducing fatigue and slippage when wet

• Beavertail, finger grooves, palm swell and checkering provide for powerful grip

• Storage compartment with snap cap in base for small item storage

• Replaces the original grip in moments

Tactical pistol grip for AR15/M16. Increases comfort and weapon performance.

Weight (oz.):

MADE IN THE U.S.A.

Part: G16Fits: M16/AR15

Made of: Polymer Weight (oz.): 4 Width (in.): 1.375”


ReMINGTON 870 12 GA. MOSSBeRG 500/590 12GA. STOCK SySTeM

1. INSTALL THE PISTOL GRIP CHOOSe PISTOl GRIPS wITH OR wITHOUT THe RAIl FOR CQB ANd HOMe deFeNSe APPlICATIONS.

2. ADD THE STOCK EASILy FOR COMFORTABLE LIVE FIRE TRAINING CHOOSe A SIX POSITION COllAPSIBle STOCK wITH OR wITHOUT AdJUSTABle SPRING lOAded

ReCOIl RedUCTION.

MODULAR SYSTEM FOR TACTICAL ShOTGUNS


advantages • Versatile modular system applicable for all situations.• Quick, secure and easy conversion from cruiser style to full stock style with two screws.• Six position adjustable stock with rubber recoil pad increases comfort and endurance, provides adjustable length of pull to accommodate all size users and body armor.• Stock features ambidextrous waterproof compartment for 4 CR123 batteries and side Picatinny rail for mounting optional five round 12 ga. shell holder.• Adjustable spring loaded recoil reduction tube reduces recoil, increase comfort and control during extended shooting/training sessions.• Customize for each mission.

PURChASE ONLY whAT YOU NEED. EXPAND LATER

CUSTOMIzE YOUR ShOTGUNMOdUlAR SySTeMS APPlICABle FOR All SITUATIONS

3. ADD A TRIPLE RAIL FOREND WITH THREE PICATINNy RAILS FOR MOUNTING ACCESSORIES SIde RAIlS ARe ReMOvABle IF NOT MISSION ReQUIRed.

REMINGTON AND MOSSBERG

ReMINGTON 870 12 GA. MOSSBeRG 500/590 12GA. STOCK SySTeM

• Replace factory buttstock with a pistol grip and Picatinny sight mount.

• Available for Remington 870 and Mossberg 500/590 12 ga.

• Remington grips include 6 interchangeable finger grooves and back straps

The ultimate kit to replace the factory stock, pistol grip and more. Providing better accuracy, stability and comfort.

REPLACEMENT GRIPS

. STOCK SySTeM

PG870 MS500 MGP500 RGP870

WITH RAIL Part: RGP870/MGP500Fits: Rem' 870 12 ga/Mossberg 500/590 12 gaNumber of Rails: 1

WITHOUT RAILPart: PG870/MS500Fits: Rem' 870 12 ga/Mossberg 500/590 12 gaNumber of Rails: 0

Made of: Polymer weight (oz.): 8/6.72

Made of: Polymer weight (oz.): 6.7/5.12

length (in.): 6.9”/6.75”Height (in.): 8.375”/7.875”width (in.): 1.5”/1.5”

length (in.): 2.5”/4”Height (in.): 6”/5.5”width (in.): 1.5”/1.5”

Mossberg 500™ shown with pistol grip, without sight rail, with 6 position recoil reduction with collapsible stock. MR500 forend with 3 rails

Remington 870 shown with pistol grip, with sight rail and. RR870 forend with 3 rails

with 3 rails



Our stock system replaces factory buttstock with a pistol grip, Picatinny sight mount and CBS six position collapsible stock, providing the versatility you need for

different situations, Pistol grip for CQB and home defense, shoulder stock for range training.

CMGPT500COllAPSIBle STOCK wITH OR wITHOUT ReCOIl RedUCTION + PISTOl GRIP wITH OR wITHOUT PICATINNy SIGHT MOUNT.

• Includes 6 position CBS collapsible buttstock with optional recoil reduction.• Available for Remington 870 and Mossberg 500.

SPeCIFICATIONS Remington 870 12 ga.

Mossberg500/590

Pistol Grip with Rail RGP870 MGP500

Pistol Grip with Rail plus 6 Position Tube & Stock CRGPT870 CMGPT500

Pistol Grip with Rail with 6 Position Recoil Reduction Tube & Stock CRGPAT870 CMGPAT500

Pistol Grip No Rail PG870 MS500

Pistol Grip No Rail plus 6 Position Tube & Stock CPGT870 CMST500

Pistol Grip No Rail with 6 Position Recoil Reduction Tube & Stock CPGR870 CMSAT500

CMGPT500



CMSAT500

REMINGTON 870

COllAPSIBle STOCK wITH OR wITHOUT ReCOIl RedUCTION + PISTOl GRIP wITH OR wITHOUT PICATINNy SIGHT MOUNT.

Part: RR870 Fits: Rem' 870 12gaNumber of Rails: 3

Made of: Polymer Weight (oz.): 7.36 Width Max (in.): 2.5”



• Polymer one piece handguard for Mossberg 500/590 12ga

• Provides a rigid lightweight Picatinny platform

• 6.5” lower rail - ideal for mounting grips and other mounts

• Comfortable grip design

• Two removable 2.5” mini side rails - ideal for mounting light/laser devices

• Special tool or wrench may be required for installation

Lightweight forend with rails. Provides three rails for mounting light, lasers and forward grips.

MOSSBERG 500/590 FOReNd wITH 3 RAIlS

• Polymer one piece handguard for Remington 870• Provides a rigid lightweight Picatinny platform• Comfortable, gripable design• 5.375” lower rail - ideal for mounting grips and other mounts• Two removable 2.25” mini side rails - ideal for mounting light/laser devices• Special tool or wrench may be required for installation

Lightweight, skeletonized forend with rails. Provides three rails for mounting light, lasers and forward grips.

ShOTGUN FORENDS wITh 3 RAILS

RR870


Part: MR500 Fits: Mossberg 500/590 12gaNumber of Rails: 3


Length (in.): 8”Height (in.): 2”

MR500

RR870 RR870

FOReNd wITH 3 RAIlS

hGA1

SGR1


RS870

• Includes aluminum stock adaptor and aluminum AR15 6 position tube• Accepts any AR15 collapsible stock• Available for Remington 870 12 ga. and similar shotguns• 6 interchangeable finger grooves and palm swells on pistol grip provide strong grip

Pistol grip, 6 position AR15 tube with collapsible buttstock. Improves comfort, control, and accuracy. Includes our CBS collapsable stock.

Part: RS870Fits: Rem. 870 12 ga



ReMINGTON 870 12 GA BUTT STOCK AdAPTORSSM

• Ideal for use with CBS collapsible stock or Picatinny rail mount for existing collapsible stocks (PRFCS) • Belt mountable using RCB1/RCB2 belt clip• High density polymer construction• Push button release

Shotgun shell holder mounts onto Picatinny rail reducing reload time. Provides the operator quick access to five extra shells.

12 GAUGe SHOTGUN SHell HOldeR

Part: SSMFits: Picatinny rail



UPR

Add a Picatinny rail on your rifle or shotgun, to securely mount a light, laser, bipod or grip. Replaces sling swivel stud.

SlING SwIvel STUd RAIl ATTACHMeNT

Part: UPRFits: Shotgun/Rifle w/ sling swivel stud

Made of: AluminumWeight (oz.): .96

Length (in.): 2.5” Height (in.): .56” Width (in.): .8125”

hGA1

• Secure stable fit ensures accuracy of mounted item• Easy to install and remove• CNC machined from aviation grade aluminum for light weight and strength

Aluminum 1.75” Picatinny rail fits plain or vent rib shotgun barrels up to 12 gauge, allowing mounting of light/laser equipment.

BARRel MOUNTed SHOTGUN RAIl

Part: HGA1Fits: Rifles and Shotguns

Made of: Aluminum Weight (oz.): 1

Length (in.): 1.88”Height (in.): 1.53” Width (in.): .90”

PlAIN BARRel SHOTGUN RAIlPlAIN BARRel SHOTGUN RAI SHOTGUN RAIlPlAIN BARRel SHOTGUN RAI SHOTGUN RAISGR1

• Secure fit ensures accuracy of mounted item• Easy to install and remove• CNC machined from aviation grade aluminum for light weight and strength • Fits rifle and AR15 type barrels

Aluminum 2” Picatinny rail fits plain barrel sizes up to 12 gauge, allowing mounting of light/laser equipment.

Part: SGR1Fits: Rifles and Shotguns



ShOTGUN ACCESSORIES

• CNC machined from aviation grade aluminum

PlAIN BARRel SHOTGUN/RIFle RAIl


SlING SwIvel STUd RAIl ATTACHMeNT

BIPOD S


BOTTOM RAI L MOUNTING BIPOD S

NBPImprove your accuracy with this versatile bipod. Mounts onto a Picatinny rail. Ideal for snipers, sharp shooters and other missions.

• Strong lightweight design made from stainless steel and polymer is super rugged.• No external springs. The whole mechanism is encased to prevent dirt and sand infiltration.• Legs can be attached/detached with two swift movements to change out leg lengths on rocky terrain.• Legs can be folded forward and backwards.• Concave base mount cradles the weapon providing a lower center of gravity & includes a 3” Picatinny rail to attach a forward grip or other accessories.• Comfortable rubber covers on legs provides a non-slip grip.• NBP now has finger grooves for quicker leg positioning.• Each leg operates separately and independently. They can be set at different heights for use on uneven terrain.• Quick release push button leg extension with push button guard.• Rubber serrated feet for use on smooth surfaces.• Leg length NBP 8-12” Part: NBP

Fits: Picatinny railMade of: Polymer/Stainless Steel Weight (oz.): 17.6 Width (in.): 4.25”

Length (in.): 8”-12”overall Length (retracted): 10.5” Height (in.): 2”

NBP BASE

BIPOD COMPONENTS AVAILABLE SEPERATELY

BASE

8-12” leg

Leg locksat 0°

Leg locksat 180°at 0°at 0° at 180°

Leg locksat 90°

SBP

side bases

Leg locksat 0°

Leg locksat 180°at 0°at 0° at 180°

Leg locksat 90°


SIDE RAI L MOUNTING BIPOD S

side basesside bases

8-12” leg

SBPImprove your accuracy with this versatile bipod. Mounts onto a Picatinny rail. Ideal for snipers, sharp shooters and other missions.

Side rail mounting provides an even lower center of gravity and a wider stance resulting in even greater stability with all of the same features of NBP bottom rail mounting bipod.

BIPOD POSITIONS• Strong lightweight design made from stainless steel and polymer is super rugged.

• No external springs plus the whole mechanism is encased to prevent dirt and sand infiltration

• Legs can be attached/detached with two swift movements to change out leg lengths on rocky terrain.

• Legs can be folded forward and backwards

• Concave base mount cradles the weapon providing a lower center of gravity & includes a 3” Picatinny rail to attach a forward grip or other accessories.

• Comfortable rubber covers on legs provides a non-slip grip.

• Now has leg finger grooves for quicker leg positioning

• Each leg operates separately and independently and can be set at different heights for use on uneven terrain.

• Quick release push button leg extension with push button guard.

• Rubber serrated feet for use on smooth surfaces

Part: SBP Fits: Picatinny rail

Made of: Polymer/Stainless Steel Weight (oz.): 17.6Width (in.): 1.5”

Length (in.): 8”-12”overall Length (retracted):10.5”/8.25

Remove legs at 225º

Part: FRS Fits: Picatinny rail

Made of: Polymer/SteelWeight (oz.): Under 1oz Length Closed on Rail (in.): 2.125”

Height opened (in.): 1.25”Height Closed (in.): .5” Width (in.): 1.6”

FRS

• Super low profile sights are manufactured from polymer and aluminum to reduce weight• Spring loaded push button raises the sight• The push button can be ambidextrously accessed• The rugged flip up mechanism is designed to ensure constant battery action and repeatable zero• Secure mounting to any Picatinny rail. Square center lug eliminates any movement• The large aperture is designed to be used for CQB and low light conditions, the small aperture for longer range target acquisition

Super low profile sights are manufactured from

The push button can be ambidextrously accessed

ensure constant battery action and repeatable zeroSecure mounting to any Picatinny rail. Square

The large aperture is designed to be used for CQB

Super low profile front sight features a toolless adjustable center post for elevation surrounded by two guide posts to assist in focusing the operator’s eye to the target.

• No tool needed for elevation adjustment

• Elevation click adjustable from firing position

• Super low profile sights are manufactured from polymer and aluminum to reduce weight

• Spring loaded push button raises the sights

• The push button can be accessed ambidextrously

• The rugged flip up mechanism is designed to ensure constant battery action and repeatable zero

• Secure mounting to any Picatinny Rail. Square center lug eliminates any movement

Part: FFS Fits: Picatinny rail

Made of: Polymer/SteelWeight (oz.): Under 1oz. Length Closed on Rail (in.): 2.125”


F RONT & REAR F LIP UP SIG hTS


F LIP UP SIGhTS

FFS

Part: FRS Fits: Picatinny rail

• Super low profile sights are manufactured from polymer and aluminum to reduce weight• Spring loaded push button raises the sight• The push button can be ambidextrously accessed•• The rugged flip up mechanism is designed to ensure constant battery action and repeatable zero ensure constant battery action and repeatable zero ensure constant battery action and repeatable zero ensure constant battery action and repeatable zero• Secure mounting to any Picatinny rail. Square Secure mounting to any Picatinny rail. Square center lug eliminates any movement center lug eliminates any movement• The large aperture is designed to be used for CQB The large aperture is designed to be used for CQB and low light conditions, the small aperture for longer range target acquisition

Super low profile front sight features a toolless adjustable center post for elevation surrounded by two guide posts to assist in focusing the operator’s eye to the target.

Elevation click adjustable from firing position

Super low profile sights are manufactured from

Spring loaded push button raises the sights

The push button can be accessed ambidextrously

The rugged flip up mechanism is designed to ensure constant battery action and repeatable zero

Secure mounting to any Picatinny Rail. Square


The rear sight features three operator selectable apertures, including the standard military A2 style double peep aperture with leaf sight aperture. All are click adjustable for windage.

FRONT FlIP UP SIGHT - wITH TOOl leSS AdJUSTABle CeNTeR POST FOR elevATION ReAR FlIP UP SIGHT- FeATUReS THRee OPeRATOR SeleCTABle APeRTUReS


TACTICA L LIG hT AND LA SER MO UNTS

PLS1q

PLS34q

PLS1

PLS34

PL1

PL2


PLS1q / PLS34q

• Light/laser mounts on the side of the Picatinny rail which brings the switch closer to the operator’s thumb

• 1” and .75” low profile, quick release push button mounts

• New offset mounting position

QUICK deTACH lOw PROFIle OFFSeT MOUNTS

Offset mount positions light closer to the weapon, decreasing possibility of snagging on objects while bringing light switch closer to thumb.

1” ANd .75” lIGHT ANd lASeR MOUNTS

Made of: PolymerWeight (oz.): .96Length (in.): 1.75”

Diameter (in.): 1” and .75”Height (in.): 2.25”Width (in.): 1.375”

Part: PLS1Q (Quick Release) 1” PLS34Q (Quick Release) .75”Fits: Picatinny rail

PLS1 / PLS34

• Light/laser mounts on the side of the Picatinny rail which brings the switch c loser to the operator’s thumb

• 1” and .75” low profile screw tightened mounts

• New offset mounting position

lOw PROFIle OFFSeT 1” ANd .75” lIGHT ANd lASeR MOUNTS

Part: PLS1 (Screw Tightened) 1” PLS34 (Screw Tightened) .75”Fits: Picatinny rail

Made of: PolymerWeight (oz.): 1.6Width (in.): 2.25”

Diameter (in.): 1” and .75”Length (in.): 1.75”Height (in.): 2.5”

PL1 / PL2

• Combat proven design in use by military worldwide

• Available in 2 diameters: PL1 - .75”, PL2 - 1”

• Slides and locks securely on rail using dual spring loaded finger release rail locks

• Secure C clamp mechanism tightens around light or laser

PICATINNy FlASHlIGHT lASeR AdAPTOR

PL1: Height (in.): 1.8” Weight (oz.): .96Length (in.): 1.9” Inner Diameter (in.): .75”Width (in.): 1.3”

PL2: Height (in.): 2.25” Weight (oz.): 1.28Length (in.): 1.9” Inner Diameter (in.): 1”Width (in.): 1.7”

MADE IN THE U.S.A.

LIGhT AND LASER MOUNTS

UFH1: 0.71” - 0.81” Dia. UFH3: 0.96” - 1.06” Dia.UFH2: 0.84” - 0.94” Dia. UFH4: 1.11” - 1.20” Dia.

SCREw TIGhTENED

UFH1P: 0.71” - 0.81” Dia. UFH2P: 0.84” - 0.94” Dia.UFH3P: 0.96” - 1.06” Dia. UFH4P: 1.11” - 1.20” Dia.

PUSh BUTTON qUICK RELEASESCREW TIGHTENED

PUSH BUTToN QUICK RELEASE

SCREwSCREwSCRE TIGh TIGh TIG TENEDTENED


LIGhT AND LASER MOUNTS

AL134

• Repeatable zero increases accuracy

• Very slim offset design keeps accessories close to the weapon minimizing snags

• Separate locking screws for each accessory

• Allows rear thumb on/off operating or remote switch

• Tightens with captive nut. Uses flathead screw or wrench

dUAl AlUMINUM PICATINNy MOUNT

One-unit mount, attaches both .75” laser and 1” flashlight to your weapon.AL1 / AL34AlUMINUM PICATINNy MOUNT

Strong aluminum mount for laser/flashlight.

Part: AL134Fits: Picatinny rail

Made of: Aluminum Weight (oz.): 3.5 Diameter (in.): .75” and 1”


AL1 / AL34AL1 / AL34

AL1

AL34

AL134

• Repeatable zero increases accuracy

• Very slim offset design keeps accessories close to the weapon

• Can be mounted to the weapon in many positions: left/right/top/bottom

• Allows rear thumb on/off operating or remote switch

• Tightens with captive nut. Uses flathead screw or wrench

UFh

• Light or laser can be quickly repositioned for all situations

• Operator can easily access on/off button with thumb while using a vertical grip

• Locks in position at 0˚ 45˚ 90˚ 135˚ 180˚

• Available in Screw Tightened or Push Button Quick Release models

• Made from molded reinforced polymer composite

5 POSITION lASeR ANd lIGHT MOUNT

Quickly move your light or laser from one side of the weapon to the other.

SCREw TIGhTENED

Part: AL1/1” - AL34/.75”Fits: Picatinny rail

Made of: Aluminum Weight (oz.): 2.24/1.9 Diameter (in.): 1” oR .75”

Length (in.): 1.25”Height (in.): 2.75”/2.375” Width (in.): 1.2”/1.9”


TGK1AR15 FRONT SIGHT MOUNTed lIGHT KIT

• 1” light mount kit attaches to front sight

• Includes FSM15P front sight mount, PL2 light mount, Surefire® G2 and batteries

Made of: Polymer/AluminumPart: TGK1FITS: AR15/M16 w/ A Style Front Sight

UEMUNIveRSAl eQUIPMeNT MOUNTMounts on Picatinny rail to provide a sling swivel stud for prod-ucts such as Harris® bipods and other accessories.

Made of: Polymer/SteelWeight: (oz.): 1

Length: 2.5”Length: .5”Length: .5”

Part: UEMFits: Picatinny Rails

• Screw down clamp lock

• The mount is made of polymer, stud made of hardened steel

LIGhT/LASER & SCOPE MOUNTS


OPSMP

CPSCeNTeR PIvOTING SlING MOUNT

Provides multiple sling mounting points and a sling mount for weapons without an existing mount.

• Lightweight and strong• Screw tightened• Captive nut uses flathead screw driver or wrench• Accommodates sling webbing up to 1.25”

Made of: AluminumWeight (oz.): 0.96

Length: 0.56”Height: 1.25”Width: 1.6”

Part: CPSFits: Picatinny Rail

SPSQUICK ReleASe ROTATING SlING MOUNT

Provides multiple sling mounting points and a sling mount for weapons without an existing mount.

• Side pivoting sling mount• Requires PBSS sling swivel (not included)• Captive nut uses flathead screw driver or wrench


Length: 0.56”Height: .75”Width: 1.6”

Part: SPSFits: Picatinny Rail

Part: SPSPBSS Sling mount plus PBSS Push Button Sling Swivel (shown)

OPSMPAR15/M16 PUSH BUTTON SlING SwIvel SlING MOUNT

Accommodates one point slings using a push button sling swivel. No tube disassembly; simply remove collapsible buttstock, slide over tube, position properly and secure. Easy and fast installation. CNC machined from aluminum with matte black finish. PBSS not included.

• Ambidextrous design.

• Easy and fast installation. No tools required.

• No tube disassembly or removal, simply remove collapsible buttstock, slide over tube position properly and secure.

• CNC machined from aluminum with matte black finish.

• No gunsmithing required.


Length: 0.56”Height: .75”Width: 1.6”

Part: oPSMPFits: M16/AR15 Carbine

Part: oPSMPPBSS Sling mount Plus Push Button Sling Swivel (Shown)

OPSMAR15/M16 ONe POINT SlING MOUNT

Sling mount positioned behind receiver provides a comfortable, ambidextrous balanced weapon carry.

PBSSPUSH BUTTON SlING SwIvel

• Push button design for quick detachment. 1.625” rugged all blued steel sling swivel. Sturdy 0.2” thick steel ring• Accepts slings up to 1.6” without binding

Made of: SteelWeight (oz.): 0.64

Length: 2”Height: .6”Width: 1.375”

Part: PBSSFits: Sling Mount

v Specifications Mount to AR15 carbine buffer

tube

Mount to Picatinny Rail

Sling attaches directly OPSM CPS

Uses quick release PBSS to attach

OPSMP SPS

Includes PBSS OPSMPBSS SPSPBSS

Made In China

S LING MOUNTS

PBSSOPSM

Part: oPSM Fits: M16/AR15/Carbine



• No tube disassembly or removal, simply remove collapsible buttstock, slide over tube position properly and secure.

• Use with single point carabiner slings or sling webbing up to 1.25”.

• Ambidextrous design.

• Easy and fast installation. No tools required.

• CNC machined from aluminum with matte black finish.

• No gunsmithing required.

57

SPSPBSS

SPS

OPSMPPBSS


S LINGS

TPS/TPSR

• Quick release buckle detaches sling from operator instantly, and also allows for easy donning with body armor

• Fully adjustable and totally ambidextrous

• Constructed from 1.5” ballistic nylon

THRee POINT SlINGProven three point design for carbine style M16/AR15. Sling wraps around handguard, Velcro secured. Attaches to collapsible stock or rifle stock.

Made of: NylonWeight (oz.): 4.48

Max Loop (in.): 2.59”Part: TPS /AR15 CarbinesPart: TPSR /AR15 Rifles

OPS/OPS1ONe POINT SlINGIdeal for close quarters combat, allows easy movement when operating inside tight spaces. Maintains its structure and provides a comfortable carry option.


oPS Max Loop (in.): 60”oPS1 Max Loop (in.): 70”

Part: oPS/oPS1Fits: Sling Mount

• Fully adjustable sling fits all body sizes.• Side release buckle allows for quick release if sling encounters

interference with objects.• Strong metal carabiner for easy attachment. • High density bungee cord and carabiner are covered to reduce noise and

wear.• Sling can be worn on back freeing hands for other tasks.• Sling easily snaps onto many mounting locations. OPS1

OPS

TPS/TPSR

OPS1OPS1

OPS

High density bungee cord and carabiner are covered to reduce noise and

TPS/TPSRTPS/TPSR


6003TwO POINT SlING

The ideal two point sling for tactical weapons.

• Small integral pouch on sling for storage.

• Quick adjustment sling with polymer hooks for silent movement.

Paracord included.

• Slide release buckle for quick conversion from patrol mode to

engagement mode

SAwSHOUldeR PAd SlING

Shoulder pad distributes weight over a larger area for extra comfort when carrying heavy weapons. The 4” wide 1” thick and 33” long padding is protected in a Cordura outer covering with a mesh lining for wicking moisture on the underside. 2” wide nylon webbing. Equipped with heavy duty metal safety hooks.


Length (in.): 57-75”Part: SAW

S LINGS

Part: 6003 Fits: Sling Mount

Made of: Nylon Weight (oz.): 4.16

Length (in.): 60”

SAw

6003

SA


5006

• Ambidextrous quick pull-tab for fast handgun access• Three zippered front pockets hold accompanying items• Constructed of 500 denier Cordura• Fits up to 4” revolvers and medium/large semi-autos• Adjustable 2” nylon strap with side buckle fits waists up to 49”

CONCeAlMeNT POUCHGreat for jogging or traveling. Features a detachable sturdy polyethylene backplate with a neoprene slot to securely hold your handgun.


Length (in.): 2.59”Height (in.): 11”

Part: 5006

5012




Ideal for storing more than your firearm, the Covert II measures 8” x 11.5”. Easy access to contents without exposing your handgun. Handgun is hidden behind the main compartment in a concealed pocket. Constructed of 500 denier Cordura.

Made of: NylonWeight (oz.): 15

Length (in.): 11.5”Height (in.): 8”

Part: 5012

5009




CONCEA LMENT POUChES / PISTO L ACCESSORIES

RCB1/RCB2

• Recommended for use with our flashlight/laser mounts (PL or PLS Series), the .223 magazine holder (MPS) or the five 12 gauge shot shell holder (SSM) as pictured

• 360º rotation. Locks in 17 positions• Allows hands free flashlight use while patrol, questioning, reading maps and documents• 2 Belt sizes available, 2”(RCB1), 2.25”(RCB2)

ROTATING PICATINNy RAIl BelT ClIP

Mount a Picatinny rail accessory to your belt.

Made of: PolymerWeight (oz.): .96Length (in.): 1.5”

Height (in.): 2.25”Width (in.): .875”

Part: RCB1 - 2” RCB2 - 2.25”

zV

Made of: Polymer PolymerWeight (oz.):Weight (oz.): .96Length (in.): Length (in.): 1.5”

Height (in.): 2.25”Width (in.): .875”RCB2 - 2.25”

SAFE-T-STIX

Solution to safe training practice, instruction, display and gun storage. Securely blocks barrel and prevents live round from being chambered. Bright and visible colors. Sizes fit 9mm pistols, and .223, and 7.62 x 39 mm rifle barrels.

9MM, .223, 7.62 x 39MM BARRel PlUGS

Part: TS9, TS223, TS762, TS9MP5 Fits: 9mm, .223, 7.62 x 39, 9mm MP5 and other models

Made of: Polymer

Sold individually or packs of 10 - Call for details.Part: 5009 Made of: Nylon Weight (oz.): 13.76

Covert shoulder bag is a 9” x 7.25” concealment holster bag that hangs casually from the shoulder. Constructed of 500 denier Cordura.

SHOUldeR BAG HOlSTeR

CONCeAlMeNT POUCH


XGL203

• Three 2.5” MIL-STD 1913 Picatinny rails• Adaptor allows mounting of light/laser, forward vertical grip, bipod and more• Easy to fit/remove and secured by Allen bolts

M203 3 PICATINNy RAIl MOUNT

Designed for the M203 40mm tubes. CNC machined aluminum.


Length (in.): 2.59”Height (in.): 2.59”Width (in.): 3”

Part: XGL203Fits: M203

G3 TUBEG3 STOCK AdAPTOR

• 6 Position H&K G3 stock adaptor easily installs and

accepts AR15 collapsible stocks.

SIGA1

hANDGUN RAILSUNdeRBARRel RAIlSQuickly add a Picatinny rail below the barrel of a handgun. Easily clamps onto the trigger guard area providing a stable platform for mounting a light/laser. CNC machined from aviation grade aluminum.

BERA1

1911A1G LKA1

FNA1

OThER RAILS & STOCK TUBES

Sold individually or packs of 10 - Call for details.


Length (in.): 3.26” Height (in.): 1.25“-1.7”

Part: G3TUBE Fits: H&K G3



1911A1 Colt 1911 Styles

BERA1 Beretta 92F

FNA1 Browning Hi Power Mark II/III

GLKA1 For Glock 17, 19, 26

SIGA1 Sig Sauer 226, 228, 229

XGL203

G3 TUBE

AqC1C REF LEX SIG hT™

CAA’s new red dot reflex sights from MSE are the most fighter friendlysights on the market. Designed by Lt. Col. (Ret.) Mikey Hartman of the IDF,Mikey brought his 22 years of experience as the founder and commander of theIDF Marksmanship and Sharpshooting School, to add to, and improve thefeatures of the reflex sight, making MSE sights the most fighter friendlysights available in the marketplace today.

• The AQC1C 1.25” x 1.375” window provides a larger field of view and quicker target acquisition. This is the largest window on the market today.

• Three user selectable reticles provide quickness or accuracy in CQB (urban) and long range engagements.

• Two reticles have horizontal lines at 3 & 9 o’clock allowing the operator to maintain the weapon on a vertical plane so the bullet trajectory and ballistics are uncompromised.

• Two reticles have 8 levels of brightness (4 for day and 4 for night) so they can be used indoors, outdoors or from inside a dark building targeting objects in the bright sun light.

• AQC1C unique design placement of the reticle mirror won’t reflect sunlight so the operator’s position cannot be given away by a reflection of the sun from the sight.

• The remote PTT (Press To Transmit) cable enables the operator to keep both hands on the weapon at all times. The PTT cable is used to turn the sight on, change reticles and change brightness levels but cannot inadvertently turn the sight off.

• Optional PTT cable is removable and securely attaches to the AQC1C

• AQC1C will go to sleep after 10 minutes of non-movement preventing battery drain and the motion sensor turns it back on when the weapon is moved. The sleep mode can be deactivated for ambush scenarios.

• The night vision mode allows the AQC1C to be used with any night vision devise without blinding the night vision.

• Reticles flash when turned on and every 10 minutes as a low battery indicator, providing a warning 2 hours before failure.

• Super rugged design passes the IDF drop test.

• Optional quick detach leavers.

• Windage & elevation adjustment knobs are hand adjustable. No tools required.


SETTING A NEW STANDARD oF ACCURACy

item # Description

AQC1CK Reflex sight 35x24 (1.375” x 1”) one CR123 battery, composite reinforced polymer body with knob mounts and case.

AQC1CKPTT Reflex sight 35x24 (1.375” x 1”) one CR123 battery, composite reinforced polymer body with knob mounts, PTT and case.

AQC1CQR Reflex sight 35x24 (1.375” x 1”) one CR123 battery, composite reinforced polymer body with quick release levers and case.

AQC1CQRPTT Reflex sight 35x24 (1.375” x 1”) one CR123 battery, composite reinforced polymer body with quick release levers, case and PTT cable.

PTT optional Push To Transmit (PTT) Cable for the MSE sight.

63

A complete self-taught course of training and instruction is included with each sight. Including a syllabus, day by day training, range scenarios, zeroing target, accuracy requirements for proficiency levels and more, allowing the operator to train like and achieve the proficiency of professionals. All MSE products come with a Two Year Warranty. See complete terms and conditions at www.commandarms.com

AqC1C REF LEX SIG hT™

THE MoST ADVANCED, ACCURATE, FIGHTER FRIENDLy SIGHT IN THE WoRLD

AqC1C SIG hT™ w/ PTT CAB LE

SUPeRIOR dURABIlITy. SUPeRIOR MATeRIAlS

International Sales: [email protected] www.caatactical.comP: 972-8-8520034 F: 972-8-8520050

[email protected]: 215-949-9944 • F: 215-949-9191TOll FRee: 1-866-611-9576

2014 caa catalog

Documents