2016 horb-shenzhen rtp

120 January 2016 7:56 AM

Co-Sponsored by Shenzhen HORB TECH Development Co.,Ltd.Floor 5-7, Block B, Funing Hi-Tech Industrial Park, No.71-2 Xintian Rd, Fuyong Town, Baoan District, Shenzhen, China.TEL: +86-755-29461997FAX: +86-755-86183100Http://www.horb.com.cn

Setting the Global Standards for Static Control! EOS/ESD Association, Inc. 7900 Turin Rd., Bldg. 3 Rome, NY 13440-2069, USA

PH +1-315-339-6937 • Email: [email protected] • www.esda.org

EOS/ESD Association Regional Tutorials Sponsored by Shenzhen Best-Resource Consulting Services Ltd.

May 24-26 2016Floor 5-7, Block B, Funing Hi-Tech Industrial Park,

No.71-2 Xintian Rd, Fuyong Town, Baoan District, Shenzhen, China.

• Learn from top industry professionals.• ESD Association instructors who devel-

oped the ANSI/ESD and IEC ESD Stan-dards bring you today’s current infor-mation and developments.

Sponsored by Shenzhen Best-Resource Consulting Services Ltd.Floor 5-7, Block B, Funing Hi-Tech Industrial Park, No.71-2 Xintian Rd, Fuyong Town, Baoan District, Shenzhen, China.TEL: +86-755-86182990 Hotline: 800-830-9440 FAX: +86-755-86183100Http://www.esd-resource.com

ABOUT THE INSTRUCTOR

FC340: ESD Program Development and Assessment (ANSI/ESD S20.20 Seminar) 9:00 a.m. - 5:00 p.m. Instructor: John Kinnear, IBMCertification: PrMThis seminar provides instruction on designing and implementing an ESD control program based on ANSI/ESD S20.20. The course provides participants with the tools and techniques to prepare for an ESD facility audit. This two-day course is an ESDA certification requirement for in-plant auditors and program managers who are working toward professional ESD certification. Current changes to ANSI/ESD S20.20 will be discussed and presented The following topics are covered in this course:

• Overview of ANSI/ESD S20.20• How to approach an assessment• Administrative elements• ESD program assessment• ESD program techniques for different applications• Technical elements• Overview of the assessment process• The audit checklist and follow-up questions

John Kinnear is an IBM senior engineer specializing in process & system technology, and facility certification in accordance with ANSI/ESD S20.20. He has a BS degree from University of Buffalo and a MS degree from Syracuse University. John is well known globally for his technical contributions to national and international standards. He has been the IBM ESD site coordinator for the Poughkeepsie site since 1989. He is past chairman of the IBM inter-divisional technical liaison committee for ESD protection and is an important member of his company’s committee to develop and implement the ESD corporate program for IBM. John has coordinated the testing of large main-frames for compliance to EMC, safety, environmental, shipping, and volatile organic emission standards. He has also been the lead en-gineer on testing large mainframe systems to EMC emissions and immunity standards for FCC, CE Mark, VCCI, and other national re-quirements. As a member of the ESD Association since 1990, John has served in several standards development committees as well as association management positions. John is the appointed technical adviser to the United States National Committee/IEC technical committee 101, where he represents the United States to the International Electrotechnical Commission (IEC). In this position he assist-

ed in the evolution of international ESD standards and supports international adoption of ANSI/ESD S20.20. As chair of the ESDA’s facility certification (ANSI/ESD S20.20) development program, John played major roles in the program’s development and industry launch. In particular, John coordinated the initial devel-opment of lead assessor training, ISO registrar certification, and witness audits. John has served in every ESD Association officer’s position, including vice presi-dent, senior vice president, and president. He is the past chairman of the EOS/ESD Symposium technical program committee and past general chairman of the 2004 EOS/ESD Symposium. For his contributions to the ESD Association, John was presented with the Outstanding Contribution award in September 2006..

This seminar is intended to provide the student with the necessary understanding of the principles involved in ANSI/ESD S20.20, to allow the development of an ESD

Control Program Plan that minimizes the risk of damage to sensitive items. In-class discussions cover real life ESD

program problems and solutions.

TUESDAY-WEDNESDAY, MAY 24-25 2016



ABOUT THE INSTRUCTOR

FC361: Class 0A Devices & Boards - ESD Controls and Auditing Measurements9:00 a.m. - 12:30 p.m.Instructor: Terry Welsher, Dangelmayer Associates LLCAdvanced ESD Controls and Auditing Measurements for CDM & Class 0 (ultra-sensitive) devices and Circuit Boards are not well known and there are many technical and strategic pitfalls that must be avoided. Industry definitions (threshold levels) for Class 0 will be described and the history of their use will be reviewed. The Class 0 category is broken down into sub-categories of increasing risk. Students will learn how to make valid measurements, avoid common pitfalls, and how to use this data to successfully handle Class 0 sensitivities. Advanced measurements will be described including event detection and high speed current measurements. Students will learn when each measurement type is useful. Compelling case studies will illustrate these techniques and the success they produce. ESD Control procedures for Class 0 manufacturing require customization, attention to detail and a full understanding of the technology. Thus, each company will need to develop a Class 0 ESD subject matter expert (SME) to ensure the correct and cost effective counter measures are taken. SOPs (Special Operating Procedures) developed by SMEs will be discussed that have proven to virtually eliminate Class 0 failures. This tutorial will be highly interactive with live demonstrations, in-plant photographs, and video clips. Students will be encouraged to ask questions and actively participate in the discussions. References to technical literature on ultra-sensitive devices will be included.

FC360: Electrical Overstress (EOS) in Manufacturing and Test 1:30 p.m. - 5:00 p.m. Instructor: Terry Welsher, Dangelmayer Associates L.L.C.Electrical overstress (EOS) is a major cause of device failure in manufacturing and in the field. Despite this, there is relatively little information on the sources of EOS and on prevention practices, particularly for the factory. In this tutorial, the fundamentals of device overstress are reviewed. Relationships among device EOS stressing models, such as the Wunsch-Bell curve, are discussed. The causes of EOS and EOS-like events in manufacturing are described and categorized by source and by stress-type. The difficulties in distinguishing between power-induced EOS and high current ESD events such as charged-board events (CBE) and cable discharge events (CDE) are discussed. Case histories, including failure analysis and root cause determination, are presented and the few relevant industry specifications are reviewed.

Dr. Terry L. Welsher retired from Lucent Technologies-Bell Laboratories Engineering Research Center in 2001, as the director of the quality, test, & reliability department. He began his career in Bell Labs in 1978; where he worked on electrical conduction mechanisms in insulat-ing polymers and electrolytic corrosion failure mechanisms in electrical interconnection materials. In 1984, he was appointed distinguished member of technical staff for his work in these fields. In 1986, he was promoted to technical manager to re-constitute the Bell Laboratories core expertise in electrostatic discharge (ESD). The newly formed group proceeded to produce a string of ground-breaking contributions to the field and played a key role in advancing industry standards. In 1994, he broadened his group’s activities to all aspects of hardware reliability for Lucent Technologies with special emphasis in environmental stress testing (EST) and product reliability prediction and planning. In 1997, he was promoted to director of the quality, test & reliability center of excellence where he directed the development and deploy-ment of product quality, test and reliability assurance practices for Lucent Technologies business units. This work included design for test-ability of integrated circuits, board and system level test and diagnosis and special techniques for testing of RF and optoelectronic systems

and components. After leaving Lucent, he became reliability director for LaserSharp Corporation, an optical fiber laser amplifier company, where he was respon-sible for product quality, reliability, and compliance. Since 2004, he has been senior vice president of Dangelmayer Associates, LLC, an EOS/ESD consulting firm.Dr. Welsher was chairman of the ESD Association standards committee 1988-1989. He was technical program chair in 1991, vice general chair in 1992, and general chair in 1993 of the EOS/ESD Symposium. He served as member of the Symposium board of directors 1993-1995. He has also been active in quality standards and road mapping activities with Sematech, the EOS/ESD Association, and the JEDEC 14 quality and reliability committee. He served on the board of directors of JEDEC 1999-2001. He is currently co-chair of the joint JEDEC/ESDA HBM and CDM ESD working groups, president of the EOS/ESD Association, and a mem-ber of the advisory board of iNARTE, a telecommunications technical certification organization. Recently, he has led the effort to harmonize and merge JEDEC and ESDA device testing standards. He holds a BS in chemistry from Florida State University and a PhD in chemical physics from the University of Texas at Austin. He is author or co-author of fifty papers in solid state physics, applied mathematics, organic chemistry, electronics reliability, and electrostatic discharge.

THURSDAY, MAY 26, 2016



420 January 2016 7:56 AM

REGISTRATION

Please Print or Type (Your name and company will appear on badge and/or certificate exactly as written below.)

EOS/ESD Association Regional Tutorials, Shenzhen, China, May 24-26, 2016Shenzhen BEST-RESOURCE Consulting Co.,Ltd. Floor 5-7, Block B, Funing Hi-Tech Industrial Park, No.71-2 Xintian Rd, Fuyong Town Baoan District, Shenzhen, China.

Payment • Company purchase orders not accepted.

Registration InformationFor credit card payments: Register online at: ESD Association http://www.esda.org/events/calendar/

Phone: +1 (315) 339-6937

Email: [email protected]

For other forms of payment Contact: Shenzhen BEST-RESOURCE Consulting Co.,Ltd.Flr 5-7, Block B, Funing Hi-Tech Industrial Park, No.71-2 Xintian Rd, Fuyong Town, Baoan District, Shenzhen, China. TEL: +86-755-86182990FAX: +86-755-86183100Http://www.esd-resource.comEmail: [email protected]

Last Name: First Name:

Company Name:

Street: City:

State/Province: Country: Zip/Postal Code:

Phone: Email:

FC340: ESD Program Development and Assessment (ANSI/ESD S20.20 Seminar) May 24-25, 2016 4434 RMB / 680 USD



Register Online at http://www.cvent.com/d/bfqp6v

All Three Tutorials May 24-26, 2016 6650 RMB / 1020 USD

FC361: Class 0A Devices & Boards - ESD Controls and Auditing Measurements FC360: Electrical Overstress (EOS) in Manufacturing and Test May 26, 2016 2217 RMB / 340 USD

2016 horb-shenzhen rtp

Education