2035 series
DESCRIPTION
2035 Series. The design of the 2035 Series valve includes many proven components for assured reliability. These items include: Same solenoid used for 2012 and 2006 Series ISO 5599/2, Size 2 high flow Spool & Sleeve and all other internal components - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: 2035 Series](https://reader033.vdocuments.net/reader033/viewer/2022061607/56814287550346895daeb437/html5/thumbnails/1.jpg)
2035 Series
![Page 2: 2035 Series](https://reader033.vdocuments.net/reader033/viewer/2022061607/56814287550346895daeb437/html5/thumbnails/2.jpg)
Common Components
• The design of the 2035 Series valve includes many proven components for assured reliability. These items include:– Same solenoid used for 2012 and 2006 Series– ISO 5599/2, Size 2 high flow Spool & Sleeve
and all other internal components– Complete G2-2 platform electrical interface
options and fieldbus, same as 2005 and 2012
![Page 3: 2035 Series](https://reader033.vdocuments.net/reader033/viewer/2022061607/56814287550346895daeb437/html5/thumbnails/3.jpg)
Electronics• G2-2 fieldbus platform
electronics and electrical connections are the same as 2005/2012 Series for consistency.
![Page 4: 2035 Series](https://reader033.vdocuments.net/reader033/viewer/2022061607/56814287550346895daeb437/html5/thumbnails/4.jpg)
2035 Series
• 5 Ported, 2 and 3 position valve functions
• Cv = 3.5, 3500 Nl/m• Available with 3/8 or 1/2
NPTF or G Tap side ports. Bottom ports are 3/8 NPTF or G Tap only.
• Many new features and enhancements from our 2005/2012 Series valves
![Page 5: 2035 Series](https://reader033.vdocuments.net/reader033/viewer/2022061607/56814287550346895daeb437/html5/thumbnails/5.jpg)
2035 Mounting Screws
• With external mounting screws at each station, the manifold can be easily disassembled at any station.
3 mm ball driver
3 mm ball driver
![Page 6: 2035 Series](https://reader033.vdocuments.net/reader033/viewer/2022061607/56814287550346895daeb437/html5/thumbnails/6.jpg)
2035 Mounting Support
• A mounting support stand-off was created so there is only one screw length needed to to mount the manifold.
• All mounting feet are the same dimension.
Same regulator gauge, type of adjustment, and 5mm hex as 2005/2012 for consistency
![Page 7: 2035 Series](https://reader033.vdocuments.net/reader033/viewer/2022061607/56814287550346895daeb437/html5/thumbnails/7.jpg)
2035 Z-Boards
• Z-Boards plug together utilizing a “shroud” that self aligns the Z-Boards eliminating any potential for misalignment.
• Single & Double Z-Boards with and without ribbon cable connectors provide up to 32 solenoid outputs on valve manifold.
Shroud
![Page 8: 2035 Series](https://reader033.vdocuments.net/reader033/viewer/2022061607/56814287550346895daeb437/html5/thumbnails/8.jpg)
2035 Z-Boards
• The electrical plug assembly MUST be removed before removing the Z-Board. The plug goes through the manifold block and plugs into the Z-Board. The Philips screw is removable from the top of the manifold block and the electrical plug pulls out.
Subtle difference from the 2005/2012
Philips screw
![Page 9: 2035 Series](https://reader033.vdocuments.net/reader033/viewer/2022061607/56814287550346895daeb437/html5/thumbnails/9.jpg)
Pilot Assembly
Solenoid Assemblyremoved
Pilot Assembly Cover
• Same part number as 2005/2012 solenoids• Integral LED indicator light in coil
Gasket for electrical connector
![Page 10: 2035 Series](https://reader033.vdocuments.net/reader033/viewer/2022061607/56814287550346895daeb437/html5/thumbnails/10.jpg)
Pilot Assembly
Pilot Assembly Cover Removed
Manual Override
![Page 11: 2035 Series](https://reader033.vdocuments.net/reader033/viewer/2022061607/56814287550346895daeb437/html5/thumbnails/11.jpg)
Pilot Assembly
Pilot Assembly Cover (inside)Note: The solenoid driver board
is in the cover, not molded in the pilot assembly.
Contains surge suppression and electronics for polarity insensitivity.
![Page 12: 2035 Series](https://reader033.vdocuments.net/reader033/viewer/2022061607/56814287550346895daeb437/html5/thumbnails/12.jpg)
Speed Control• The speed control for
the 2035 series has tapped mounting hole as opposed to the mounting studs used for the 2005/2012 series.
(4) Tapped Holes for Valve Mounting
2.5 mm ball driver
![Page 13: 2035 Series](https://reader033.vdocuments.net/reader033/viewer/2022061607/56814287550346895daeb437/html5/thumbnails/13.jpg)
Function Blocks
• Sandwich pressure block and sandwich exhaust block available.
• Both have tapped mounting holes as opposed to mounting studs.
![Page 14: 2035 Series](https://reader033.vdocuments.net/reader033/viewer/2022061607/56814287550346895daeb437/html5/thumbnails/14.jpg)
Muffler Cover
• The muffler cover for the 2035 Series is an all metal part to avoid warping and ensure a proper fit.
• Integral muffler & piped exhaust options are available
• Pilot supply porting in left end plate and pilot exhaust in right endplate.
Pilot Exhaust
![Page 15: 2035 Series](https://reader033.vdocuments.net/reader033/viewer/2022061607/56814287550346895daeb437/html5/thumbnails/15.jpg)
12 to 14 Connector
• 14 to 12 Connector distributes power from the 14 end solenoid to the 12 end solenoid.
12 end 14 end
Electrical Plug
![Page 16: 2035 Series](https://reader033.vdocuments.net/reader033/viewer/2022061607/56814287550346895daeb437/html5/thumbnails/16.jpg)
Individual Base
![Page 17: 2035 Series](https://reader033.vdocuments.net/reader033/viewer/2022061607/56814287550346895daeb437/html5/thumbnails/17.jpg)
Transition Plate
• An adaptor plate is available to transition from the 2035 to the 2012 Series. (Included in AK assembly number)
• 2035 left side of plate, 2012 right side of plate looking at the cylinder ports
Cylinder ports this side
STN 1
STN 2
STN 3
STN 4
![Page 18: 2035 Series](https://reader033.vdocuments.net/reader033/viewer/2022061607/56814287550346895daeb437/html5/thumbnails/18.jpg)
Summary
• The 2035 Series valve is an extension of the Generation 2000 series of products. With it’s high flow and many unique features, the 2035 is a great addition to the Generation 2000 family.