239813017 catalogo varco bj

J159Varco BJCasing Running Tool

CRT-14

Designed for running casing, the type CRT 14 Casing Running Tool combines years of operational experience between the TDS and FMS (Flush Mounted Spider). Compact, it uses Varcos field proven technology while

increasing the work efficiency on the rig.The CRT 14 is installed onto the shaft of the Top Drive for rotation, torque and suspended Varco B

Casing Running Tool

from links for load transfer. By being able to instantaneously start rotation and circulation through the casing string, the CRT 14 reduces the probability of stuck casing. The tool also has the ability to push casing into the well with 40,000 lbs force allowing for stripping-in during underbalanced drilling operations. The design eliminates the power casing tong operation near well center in addition to a person at the stabbing board, maintains proper alignment during stabbing and make-up of casing, adds the ability for soft stabbing and thread compensation while minimizing casing thread damage. Purposely designed, the fill-up tool allows for fast change-out of seal and guide elements when running mixed strings. The seals on the fill-up tool prevent spillage of expensive drilling fluids reducing the chance of environmental incidents.Features include: use of standard SL, FMS slips and bottom guides, standard 132/144/180 inch links, air-cushioned weight compensator, torque/turn controls and logging for premium casing connections are included. Specifications

Weight and SizeWeight 12,000 lbs. (5,443 kg)

Case Size Range O.D. 4 1/2 (114 mm) to 14 (356 mm)

Fill-up Tool 9 5/8 (244 mm) to 14 (356 mm)

Make-up Torque 45,000 lb. ft. (61,012 Nm)

Hoist Capacity 500 Tons API 8C

Push Down Force 40,000 lbs (18,144 kg)

Mud Circulation Pressure 5,000 psi

Varc

160 Bushings are locked into place with spring loaded pins for quick, easy removal and installation.

Bushings can be changed within 5 minutes.

No special tools are needed, no loose nuts, bolts or pins.

Hinge journals are bushed to put major wear into replaceable components.

SpecificationsBX Hydraulically Actuated Elevator

Maxim

Frame Frame P/N Size Range18 Tool

Joint 9

CouSho

NOTES:1. Make sure not to use the BX elevator to support l

sign loads, nor at loads higher than the coupling

3 203300Y10 9 5/8" - 20" n/a 35

4-50 203290Y10 2 3/8" - 9 3/4" 500 ton 50

4-75 203200Y10 2 3/8" - 9 3/4" 500 ton 50

5 50004000Y10 3 1/2" - 11" 750 ton 75

BX Hydraulically Actuated Elevator Pow

Power RPressureFlow rateRotator part number: 50004130

Hydraulic lines1

NOTES:1. 2 Additional hydraulic lines required when using rotatorsum Rating

01 pling ulder

oads in excess of the casing manufacturers recommended de- is designed to hold.

Special Square Riser

BushingDrill Collars1

Link Size

Min. Max.

0 ton n/a 350 ton 2 3/4 3 1/2

0 ton n/a 350 ton 2 3/4 4 3/4

0 ton 750 ton 350 ton 3 1/2 4 3/4

0 ton 1000 ton 350 ton 4 3/4 5 1/2

er Requirements

equirements2000 psi5 GPMo BJ

BX Hydraulically Actuated Elevator

BX Hydraulically Actuated Elevator

BX Hydraulically Actuated Elevator Purpose designed for hydraulic actuated

operation Cost competitive with normal rig

complement of air-operated, drill pipe, drill collar and casing elevators.

The most economic way to fully actuate all elevator functions.

Double Door design for optimal balance and performance.

The hydraulic cylinders are located inside the body casting for clean lines and maximum protection, and yet they are accessible for normal maintenance.

Changeable bushings allow one elevator frame to handle all pipe size and type requirements.

One door bushing is spring loaded with linkage connecting it to a locking pin. Any load on this bushing segment engages the pin preventing the elevator from opening. This safety lock prevents the elevator from opening under load.

The elevator is prepared for an interlock system as an option when used with a power slip.

A trigger mechanism initiates the closing sequence when pipe is thrown into the elevator.

Additional equipped with a rotary actuator can be tilted to pick up pipe from the V-door, eliminating the need for single joint elevators..

3 @ 1/2

Varco BJ

161 B

Overview BX-4-50, 4-75 Bushings

Casing SizeWeight (kg / lbs) per segment

203210Y129 4 1/2 Casing bushing 22/48

203210Y131 5 Casing bushing 22/48

203210Y132 5 1/2 Casing bushing 22/48

203210Y135 6 5/8 Casing bushing 20/44


203210Y137 7 5/8 Casing bushing 20/44

203210Y705 7 3/4 Casing bushing 20/44

203210Y139 8 5/8 Casing bushing 18/39

203210Y141 9 5/8 Casing bushing 18/39

Tubing203210Y158 2 3/8 Plain tubing bushing 23/51

203210Y159 2 3/8 OD.EU. Tubing bushing 23/51

203210Y160 2 7/8 Plain tubing bushing 23/51

203210Y161 2 7/8 OD. EU. Tubing bushing 23/51

203210Y162 3 1/2 Plain tubing bushing 23/51


203210Y164 4 OD. Plain tubing bushing 22/48203210Y165 4 OD. EU. Tubing bushing 22/48


Drill Collars Zip Lift203211Y735 3 1/8 DC with Zip lift bushing 23/51

203211Y736 3 3/8 DC with Zip lift bushing 23/51





203211Y530 5 DC with Zip lift bushing 22/48













203211Y427 9 DC with Zip lift bushing 18/39203211Y370 9 1/2 DC with Zip lift bushing 18/39

203211Y367 9 3/4 DC with Zip lift bushing 18/39X Hydraulically Actuated Elevator

Overview BX-4-50, 4-75 Bushings

Drill Pipe SizeWeight (kg / lbs) per segment

203212Y117 2 7/8 IU DP bushing 23/51203212Y118 2 7/8 EU DP bushing 23/51

203212Y7763 1/2 IEU DC Bushing

Max. TJ. OD. Incl. Hardf. 6 3/423/51

203212Y7774 IU DP bushing


203212Y7784 EU & 4 1/2 IEU DP bushing


203212Y7794 1/2 EU & 5 IEU DP bushing

max. TJ. OD. Incl. Hardf. 8 1/421/46

203212Y7805 1/2 IEU DP bushing


203212Y7815 1/2 IF IEU DP bushing


203212Y7895 7/8 DP bushing (6Upset max.)


203212Y7826 5/8 IEU DP bushing


Drill Collars Plain

(Lift-Plug)203213Y201 2 1/2 DC plain bushing 21/46203213Y203 2 3/4 DC plain bushing 21/46203213Y205 3 DC plain bushing 21/46203213Y206 3 1/8 DC plain bushing 21/46203213Y207 3 1/4 DC plain bushing 21/46203213Y795 3 3/8 DC plain bushing 21/46203213Y211 3 3/4 DC plain bushing 21/46203213Y519 4 1/8 DC plain bushing 21/46203213Y548 4 1/4 DC plain bushing 21/46203213Y354 4 3/4 DC plain bushing 21/46203213Y349 6 DC plain bushing 21/46203213Y348 6 1/4 DC plain bushing 20/44203213Y135 6 1/2 DC plain bushing 20/44203213Y338 6 3/4 DC plain bushing 20/44203213Y334 8 DC plain bushing 18/39203213Y347 8 1/4 DC plain bushing 18/39203213Y580 8 1/2 DC plain bushing 18/39203213Y356 9 DC plain bushing 18/39203213Y346 9 1/2 DC plain bushing 18/39

Special square

shoulder BX 4-75 ONLY!!

203214Y790 7 Riser handling bushing 17.5/38203214Y757 8 Riser handling bushing 17.5/38203214Y783 8 3/4 Riser handling bushing 17.5/38

203214Y784 8 5/8 Riser handling bushing 17.5/38203214Y788 9 5/8 Riser handling bushing 17.5/38

Varc

162o BJ

BX Hydraulically Actuated Elevat

Overview BX-3 Bushings

Casing Size Weight (kg / lbs) Per Segment

203310Y141 9 5/8" 43/95

203310Y649 9 7/8" 43/95

203310Y142 10 3/4" 42/92

203310Y453 10 5/8 42/92

203310Y143 11 3/4" 41/90

203310Y729 11 7/8" 41/90

203310Y345 12 3/4" 39/86

203310Y676 12 7/8" 39/86

203310Y144 13 3/8" 37/81

203310Y596 13 5/8" 37/81

203310Y690 14" 37/81

203310Y145 16" 32/70

203310Y664 16 3/4" 32/70

203310Y723 18" 25/55

203310Y146 18 5/8" 25/55

203310Y147 20" 20/44

Drill Collars Plain Size

Weight (kg / lbs) Per Segment

203312Y228 10" DC plain 40/88

203312Y229 10 1/2" DC plain 40/88

203312Y230 11" DC plain 40/88or

Varco BJ

163

50004014Y788 Riser handling bushing 9 5/8 18/39 B

Overview BX-5 Bushings

Casing Size Weight (kg / lbs) Per Segment

50004010Y129 4 1/2 Casing bushing 22/48

50004010Y130 4 3/4 Casing bushing 22/48


50004010Y132 5 1/2 Casing bushing 22/48

50004010Y133 5 3/4 Casing bushing 22/48


50004010Y135 6 5/8 Casing bushing 20/44


50004010Y137 7 5/8 Casing bushing 20/44

50004010Y705 7 3/4 Casing bushing 20/44

50004010Y139 8 5/8 Casing bushing 18/39

50004010Y141 9 5/8 Casing bushing 18/39

50004010Y649 9 7/8 Casing bushing 18/39

50004010Y142 10 3/4 Casing bushing 18/39

Drill Collars Zip Lift Size

Weight(kg / lbs)

Per Segment















50004011Y419 11 DC with Zip lift bushing 18/39X Hydraulically Actuated Elevator

Drill Pipe SizeWeight

(kg / lbs) Per Segment

50004012Y7763 1/2 IEU DC Bushing


50004012Y7774 IU DP Bushing


50004012Y7784 EU & 4 1/2 IEU DP Bushing


50004012Y7794 1/2 EU & 5 IEU DP Bushing


50004012Y7805 1/2 IEU DP Bushing


50004012Y7815 1/2 IF IEU DP Bushing


50004012Y7895 7/8 DP Bushing (6 Upset max.)


50004012Y7826 5/8 IEU DP Bushing


Drill Collars Plain

(Lift-Plug)Size

Weight(kg / lbs)

Per Segment

50004013Y354 4 3/4 DC Plain bushing 22/48




50004013Y334 8 DC Plain bushing 18/39








Special Square

Shoulder Size

Weight(kg / lbs)

Per Segment50004014Y757 Riser handling bushing 8 18/39

50004014Y783 Riser handling bushing 8 3/4 18/39

50004014Y784 Riser handling bushing 8 5/8 18/39

Varc

164o BJ

PS 21/30 Hydraulic Power Slip

PS 21/30 Hydraulic Power Slip

Installs flush with the drill floor Improves both safety and rig efficiency as

proven with the FMS Flush Mounted Casing Slip.

Eliminates work platforms for stabbing and operating power tongs during casing running operations.

Power down slips Reacts up to 45,000 ft lbs of torque, on

14 casing with sufficient string weight.Insert carriers make this a universal tool, not just another power slip Allows the PS 21 to handle all pipe types

and sizes, including BHAs, collars, drill pipe, casing and tubing from 2 3/8 to 14 and PS 30 from 2 3/8 to 20

Quick changeover from BHAs to collars to drill pipe allows the PS 21/30 to trip the entire string.

Insert carriers can be changed with pipe in the hole.

Carrier change can be done in 5 minutes or less.

Special drop and lock, pull and release design eliminates loose pieces such as bolts and pins.

The PS 21/30 can be fitted with insert bowls should it become necessary to use hand slips.

Like the insert carriers, the slips also have a rapid change system Two handles on the middle slip segment

retract and lock the spring-loaded slip retaining pin.

No loose parts.Centering device The PS 21/30 is standard equipped with a

centering device incorporated in the top cover

Slip set-back designed to pass tool joints, BHAs and casing centralizers The slip set back allows tool joints and drill

pipe protectors to pass without dragging on the inserts, even when drilling with6 5/8 drill pipe.

The PS 21/30 will pass: BHAs when tripping; Centralizers when running casing.Control Panel A control panel, which can be located in

the drillers console, enables the driller to operate the slips.PS 21/30 SpecificationsPS 21 PS 30

For rotary table size 37 1/2 49 1/2

Pipe size range 2 3/8 to 14 2 3/8 to 20Load rating 500 T 750 T

Hydraulic RequirementsPressure1

NOTES:1. Pressure in return line not to exceed 200 psi.

2300 - 2500 psi 2300 - 2500 psiFlow rate 10 GPM 10 GPM

PS 21 P/N

PS 30 P/N

Body2

2. Specify rotary brand

202200 202400Hand slip bowl # 3 10 3/4 slip 202361 202361Hand slip bowl # 3 16 slip 202364Hand slip bowl # 2 16 slip 202363Hand slip bowl # 1 16 slip 202362Hand slip bowl # 3 10 3/4

removal tool50004550-21 50004550-21

Hand slip bowl # 1 16 removal tool 50004550-30

Pogo stick 50004600-1 50004600-1Slip removal tool 50004551 50004551Slip handle operating tool 50004552 50004552Extension kit for slip handles 50004604-1 50004604-1Hook up kit3

3. Part number is rig specific, please call.

To be advised To be advisedPS 30 Adapter plates 49 1/2Emsco National 50004580Oilwell National 50004581Wirth National 50004582

Varco BJ

165 PS 21 Size Components Data

PS 21 Size Components Data


SlipP/N

Clampingdiameter [inches]

Pipe type

Zip DC [inches]

Plain DC [inches]

Rating [Tons]

Slip assy / Insert Carrier

P/N

Dressing Kit P/N

Insert P/N

Load ringP/N

Ram/Ram-

insertsP/N

Throat opening

(slips up) [inches]

Inserts directly in

slip

14 Csg 500 202250-140051202250-

1400 2635 202347-

1400 18

13 5/8 Csg 500202250-

136351202250-

1363 2653 202347-

136317 5/8

13 3/8 Csg 500202250-

133851202250-

1338 2636 202347-

133817 3/8

12 3/4 Csg 500202250-

127551202250-

1275 2657 202347-

127517 3/4

11 7/8 Csg 500202250-

118851202250-

1188 2651 202347-

118816 7/16

11 3/4 Csg 500202250-

117551202250-

1175 2637 202347-

117516 5/16

202250-1 11 1/8 Csg 500202270-

111351202270-

1113 2651 202346-

111315 3/4

202250-1 10 7/8 Csg 500202270-

108851202270-

1088 2651 202346-

108815 1/2

202250-1 10 3/4 Csg 500202270-

107551202270-

1075 2637 202346-

107515 3/8

202250-1 9 7/8 Csg 500202270-

98851202270-

988 2650 202346-

98814 9/16

202250-1 9 5/8 Csg 500202270-

96351202270-

963 2656 202346-

96314 5/16

202250-1 9 1/2 Csg 500202270-

95051202270-

950 2657 202346-

95014 1/2

202250-1 9 1/8 Csg 500202279-

91351202279-

913 2637 202346-

91314 1/4

202250-1 8 5/8 Csg 500202279-

86351202279-

863 2652 202346-

86313 1/2

202250-1 7 3/4 Csg 500202279-

77551202279-

775 17080 202346-

775 13

202250-1 7 5/8 Csg 500202273-

76351202273-

763 2633 50004573-3202346-

76312 1/2

202250-1 7 Csg 500 202273-70051202273-

700 2623 50004573-3202346-

70011 7/8

202250-1 6 5/8 Csg/DP 500202273-

66351202273-

663 2632 50004573-3202346-

66311 5/8

202250-1 6 1/2 Csg 500202369-

65051202369-

650 2173 50004573-2202346-

65011 1/2

202250-1 6 9/64 Csg/DP 500202369-

61451202369-

614 2172 50004573-2202346-

61411 1/8

202250-1 6 Csg/DP 500 202369-60051202369-

600 2169 50004573-2202346-

60011

202250-1 5 7/8 DP 500202369-

58851202369-

588 2623 50004573-2202346-

588 11

202250-1 5 1/2 Csg/DP 500202274-

55051202274-

550 2170 50004573-5202346-

55010 3/4

202250-1 5 Csg/DP 500 202274-50051202274-

500 2169 50004573-5202346-

50010 1/4

202250-1 4-1/ Tbg/DP 500 202274- 51202274- 2168 50004573-5 202346- 9 3/2 450 450 450 4

166

Varco BJ


202250-1 4 Tbg/DP 500 202278-40051202278-

400 2162 50004573-6202346-

4009 3/8

202250-1 9 1/2 DC 10 9 1/2 350202271-

95051202271-

950 2633 14 3/16

202250-1 9 1/4 DC 9-3/4 9 1/4 350202271-

92551202271-

925 2655 16 15/16

202250-1 9 DC 9-1/2 9 350202271-

90051202271-

900 2633 13 11/16

202250-1 8 3/4 DC 9 1/4 8 3/4 350202271-

87551202271-

875 2655 13 9/16

202250-1 8 5/8 DC 9 1/8 8 -5/8 350202271-

86351202271-

863 2653 13 1/2

202250-1 8 1/2 DC 9 8 1/2 350202271-

85051202271-

850 2652 13 7/16

202250-1 8 1/4 DC 8 3/4 8 -1/4 350202271-

82551202271-

825 2638 12 7/8

202250-1 8 1/8 DC 8 5/8 8 1/8 350202271-

81351202271-

813 2650 12 3/4

202250-1 8 DC 8 1/2 8 350202272-

80051202272-

800 2633 13-1/4

202250-1 7 3/4 DC 8 1/4 7 3/4 350202272-

77551202272-

775 2655 13

202250-1 7 1/2 DC 8 7 1/2 350202272-

75051202272-

750 2652 12 3/4

202250-1 7 1/4 DC 7 3/4 7 1/4 350202272-

72551202272-

725 2638 12 1/2

202250-1 6 3/4 DC 7 1/4 6 3/4 350202275-

67551202275-

675 2633 11 1/4

202250-1 6 1/2 DC 7 6 1/2 350202275-

65051202275-

650 2633 11

202250-1 6 1/4 DC 6 3/4 6 1/4 350202275-

62551202275-

625 2655 10 7/8

202250-1 6 DC 6 1/2 6 350202275-

60051202275-

600 2652 10 7/8

202250-1 5 3/4 DC 6 1/4 5 3/4 350202275-

57551202275-

575 2638 10 5/8

202250-1 5 5/8 DC 6 1/8 5 5/8 350202275-

56351202275-

563 2650 10 1/2

202250-1 3 1/2 Tbg/DP 350202277-

35051202277-

350 2162 50004573-4202346-

3508 7/8

202250-1 3 1/8 Tbg/DP 350202277-

31351202277-

313 2172 50004573-4202346-

3138 5/8

202250-1 2 7/8 Tbg/DP 350202277-

28851202277-

288 2161 50004573-4202346-

2888 1/2

202250-1 2 3/8 Tbg/DP 350202277-

23851202277-

238 2160 50004573-4202346-

2388 1/8

202250-1 4 3/4 DC 5 1/4 4 3/4 225202276-

47551202276-

475 2165 10

202250-1 4 5/8 DC 4 5/8 225202276-

46351202276-

463 2655 9 7/8

PS 21 Size Components Data (Continued)

SlipP/N

Clampingdiameter [inches]

Pipe type

Zip DC [inches]

Plain DC [inches]

Rating [Tons]


P/N

Dressing Kit P/N

Insert P/N

Load ringP/N

Ram/Ram-

insertsP/N

Throat opening

(slips up) [inches]202250-1 4 3/8 DC 4 3/4 4 3/8 225202276-

43851202276-

438 2172 9 3/4

202250-1 4 1/4 DC 4 1/4 225202276-

42551202276-

425 2166 9 5/8

202250-1 4 DC 4 225 202276-40051202276-

400 2638 9 3/8

Varco BJ




SlipP/N

Clamp-ing diam-

eter [inches]

PipeType

Zip DC [inches]

Plain DC [inches]

Rating[Tons]


P/N

Dressing Kit P/N

InsertP/N

Load ring P/N

Ram/Ram-

inserts P/N

Throat opening

(slips up) [inches]

Insertsdirectlyin slip

20 Csg 500 202430-200051202430-

2000 2635 202381-

2000 24

18 5/8 Csg 500202430-

186351202430-

1863 17080 202381-

186322 3/4

202430-1 18 Csg 500 202430-180051202430-

1800 2635 202381-

1800 22

202430-1 16 Csg 750 202440-160051202440-

1600 2635 202386-

1600 20

202430-1 14 Csg 750 202441-140051202441-

1400 2635 202386-

1400 18

202430-1 13 5/8 Csg 750202441-

136351202441-

1363 2653 202386-

136317 5/8

202430-1 13 3/8 Csg 750202441-

133851202441-

1338 2636 202386-

133817 3/8

202430-1 12 3/4 Csg 750202441-

127551202441-

1275 2657 202386-

127517 1/4

202430-1 11 7/8 Csg 750202442-

118851202442-

1188 2651 202386-

118816 7/16

202430-1 11 3/4 Csg 750202442-

117551202442-

1175 2637 202386-

117516 5/16

202430-1 10 3/4 Csg 750202443-

107551202443-

1075 2637 202386-

107515 3/8

202430-1 9 7/8 Csg 750202443-

98851202443-

988 2650 202386-

98814 7/16

202430-1 9 5/8 Csg 750202443-

96351202443-

963 2656 202386-

96314 5/16

202430-1 7 5/8 Csg 750202445-

76351202445-

763 2633 50004573-1202386-

76314 1/2

202430-1 7 Csg 750 202445-70051202445-

700 2623 50004573-1202386-

70013 7/8

202430-1 6 5/8 Csg/DP 750202445-

66351202445-

663 2632 50004573-1202386-

66313 1/2

202433-1 6 1/2 Csg 750202445-

65051202445-

650 2673 50004573-1202386-

65013 3/8

202430-1 5 7/8 DP 75050004569-

58851004598-

588 2623 50004573-2202386-

588 11

202430-1 5 1/2 Csg/DP 750202446-

55051202446-

550 2170 50004573202386-

55010 3/4

202430-1 5 Csg/DP 750 202446-50051202446-

500 2169 50004573202386-

50010 1/4

202430-1 4 1/2 Tbg/DP 750202446-

45051202446-

450 2168 50004573202386-

4509 3/4

202433-1 11 1/8 Csg 500202270-

111351202270-

1113 2651 202386-

111315 3/4

10 3/ 202270- 51202270- 202386- 15 3/202433-1 4 Csg 500 1075 1075 2637 1075 8

168

Varco BJ


202433-1 9 7/8 Csg 500202270-

98851202270-

988 2650 202386-

98814 9/16

202433-1 9 5/8 Csg 500202270-

96351202270-

963 2656 202386-

96314 5/16

202433-1 9 1/8 Csg 500202279-

91351202279-

913 2637 202386-

91314 1/4

202433-1 8 5/8 Csg 500202279-

86351202279-

863 2652 202386-

86313 1/2

202433-1 7 3/4 Csg 500202279-

77551202279-

775 17080 202386-

775 13

202433-1 7 5/8 Csg 500202273-

76351202273-

763 2633 50004573-3202386-

76312 1/2

202433-1 7 Csg 500 202273-70051202273-

700 2623 50004573-3202386-

70011 7/8

202433-1 6 5/8 Csg/DP 500202273-

66351202273-

663 2632 50004573-3202386-

66311 5/8

202433-1 6 1/2 Csg 500202369-

65051202369-

650 2173 50004573-2202386-

65011 1/2

202433-1 6 9/64 Csg/DP 500202369-

61451202369-

614 2172 50004573-2202386-

61411 1/8

202433-1 5 7/8 DP 500202369-

58851202369-

588 2623 50004573-2202386-

588 11

202433-1 5 1/2 Csg/DP 500202274-

55051202274-

550 2170 50004573-5202386-

55010 3/4

202433-1 5 Csg/DP 500 202274-50051202274-

500 2169 50004573-5202386-

50011 1/4

202433-1 4 1/2 Tbg/DP 500202274-

45051202274-

450 2168 50004573-5202386-

4509 3/4

202433-1 4 Tbg/DP 500 202278-40051202278-

400 2162 50004573-6202386-

4009 3/8

202433-1 9 1/2 DC 10 9 1/2 350202271-

95051202271-

950 2633 14 3/16

202433-1 9 1/4 DC 9 3/4 9 1/4 350202271-

92551202271-

925 2655 16 15/16

202433-1 9 DC 9 1/2 9 350202271-

90051202271-

900 2633 13 11/16

202433-1 8 3/4 DC 9 1/4 8 3/4 350202271-

87551202271-

875 2655 13 9/16

202433-1 8 5/8 DC 9 1/8 8 5/8 350202271-

86351202271-

863 2653 13 1/2

202433-1 8 1/2 DC 9 8 1/2 350202271-

85051202271-

850 2652 13 7/16

202433-1 8 1/4 DC 8 3/4 8 1/4 350202271-

82551202271-

825 2638 12 7/8

202433-1 8 1/8 DC 8 5/8 8 1/8 350202271-

81351202271-

813 2650 12 3/4

202433-1 8 DC 8 1/2 8 350202272-

80051202272-

800 2633 13 1/4


SlipP/N

Clamp-ing diam-

eter [inches]

PipeType

Zip DC [inches]

Plain DC [inches]

Rating[Tons]


P/N

Dressing Kit P/N

InsertP/N

Load ring P/N

Ram/Ram-

inserts P/N

Throat opening

(slips up) [inches]202433-1 7 3/4 DC 8 1/4 7 3/4 350202272-

77551202272-

775 2655 13

202433-1 7 1/2 DC 8 7 1/2 350202272-

75051202272-

750 2652 12 3/4

Varco BJ


202433-1 7 1/4 DC 7 3/4 7 1/4 350202272-

72551202272-

725 2638 12 1/2

202433-1 6-3/4 DC 7 1/4 6-3/4 350202275-

67551202275-

675 2633 11 1/4

202433-1 6-1/2 DC 7 6-1/2 350202275-

65051202275-

650 2633 11

202433-1 6-1/4 DC 6 3/4 6-1/4 350202275-

62551202275-

625 2655 10 7/8

202433-1 6 DC 6-1/2 6 350202275-

60051202275-

600 2652 10 7/8

202433-1 5 3/4 DC 6 1/4 5-3/4 350202275-

57551202275-

575 2638 10 5/8

202433-1 5 5/8 DC 6 1/8 5-5/8 350202275-

56351202275-

563 2650 10 1/2

202433-1 3 1/2 Tbg/DP 350202277-

35051202277-

350 2162 50004573-4202386-

3508 7/8

202433-1 3 1/8 Tbg/DP 350202277-

31351202277-

313 2172 50004573-4202386-

3138 5/8

202433-1 2 7/8 Tbg/DP 350202277-

28851202277-

288 2161 50004573-4202386-

2888 1/2

202433-1 2 3/8 Tbg/DP 350202277-

23851202277-

238 2160 50004573-4202386-

2388 1/8

202433-1 4 3/4 DC 5 -1/4 4-3/4 225202276-

47551202276-

475 2165 10

202433-1 4 5/8 DC 4-5/8 225202276-

46351202276-

463 2655 9 7/8

202433-1 4 3/8 DC 4 3/4 4-3/8 225202276-

43851202276-

438 2172 9 3/4

202433-1 4 1/4 DC 4-1/4 225202276-

42551202276-

425 2166 9 5/8

202433-1 4 DC 4 225 202276-40051202276-

400 2638 9 3/8


SlipP/N

Clamp-ing diam-

eter [inches]

PipeType

Zip DC [inches]

Plain DC [inches]

Rating[Tons]


P/N

Dressing Kit P/N

InsertP/N

Load ring P/N

Ram/Ram-

inserts P/N

Throat opening

(slips up) [inches]

Varc

170o BJ

Rotary Support Table, Power Uni

Rotary Support Table, Power Unit

RST Rotary Support TableSmaller, lighter and more cost effective for top drive equipped rigs Uses hydraulic motors directly geared to

the rotary drive gear. Eliminates the transmission and the drive

train. Standard hydraulic operated lock permits

the table to be locked at any position, in both directions.

Reduces the rotary skid size. Lower maintenance costs. Hydraulic dynamic slip ring allows

operation of PS 21/30 power slip without manually breaking/making hydraulic connections.

Central lubrication system allows easy greasing of all moving parts. Optional automated central greasing system available.

Maximum back-up torque on locks is 120000 ft lbs.

Can be ordered with solid adapter to reduce from 60 1/2 to 49 1/2, and/or hinged adapter to reduce 49 1/2 to 37 1/2.

External hydraulic control station for easy maintenance.

Specifications

Part numbers are rig specific.Power Unit

RST 375 RST 495 RST 605

Table size 37 1/2 49 1/2 60 1/2

Load rating static 750 Tons 1000 Tons 1000 Tons

Torque max. ft lbs (@ 3000 psi) 30000 45000 40000

Operating Speed max. RPM 5 5 5

Speed max.intermittent 15 15 15

Gear ratio 1:7.05 1:6.63

Dimensions LxWxH 86x70 3/4x

273/4101x 84x

301/2109x 95x

301/2

Weight, approx. lbs 14000 23000 25000

RST Adapter Plates

Size P/N

49 1/2 37 1/2with recess

250305250305-160 1/2 49 1/2 50004702-1t

Used with closed center tools Either diesel or electric driven Isolation class IP 54 EEXe-II-T3, explosion

proof Skid mounted Variable displacement pump Template controlled with an oil cooler Fluid level sensor Return line filter Power unit can be supplied at various flows

and pressure upto a maximum of 93 GPM @ 1000 psi / 35 GPM @ 2500 psi.

Part number and pricing on request

Power Unit

RST 605 Rotary Support Table

Varco BJ

171Hydraulic Cathead

Hydraulic CatheadDescription:Greater Safety for Rig Personnel. Snatch blocks and multi-line hook-ups are not required for most connections. Shock loads are replaced by a smooth, steady line pull to save wear and tear on rig tongs. Once adjusted, the Varco HC26 pulls to the desired force, up to 32,500 lbs, every time and with a quickness that is unequalled. It will also make-up mousehole connections. This tool features the simplest, most positive automatic cable feed out system yet devised. After completing make-up or break-out the control lever is simply pushed into the detent position. The line will automatically and smoothly feed out and stop ready for the next joint. The HC 26 Hydraulic Cathead, includes cylinder housing and wire line assembly, remote control box assembly and 25 foot hoses to connect cylinder and control box. Does not include main pressure and return hoses. Hydraulic Cathead

Specifications: Line Pull : Variable to 26,000 lbs (11794 kg)

@ 2000 psi (140 Bar) variable to 32,500 lbs (14742 kg) @ 2500 psi (170 bar)

Speed : 0 to 1.5 ft/sec @ 29 GPM - free line pull (0 to .46 m/sec @ 110 l/min)

Stroke : 84 (2134 mm) Cylinder Stroke : 42 (1067 mm) Line Diameter : 7/8 (22.23 mm) Weight : 1883 lbs (854 kg) Load Indicator : reads directly in lbs. of line

pull Hydraulic Power Requirements : Flow Rate

Range 29 to 35 GPM (110 to 133 l/min) Operating Pressure range : 2000 to 2500 psi

(140 to 170 Bar)Assembly numbers: For Closed-Center operation : 76713 For Open-Center operation : 76713-1

HC 26 Hydraulic Cathead

Varc

172o BJ

Spinning Wrenches

Spinning Wrenches

SSW 10 Spinning WrenchDescription:The Varco Safety Spinning Wrench, SSW 10, is a pneumatically powered tool for spinning drill pipe from 3 1/2 to 5 1/2 O.D. Using the proven principle of frictional drive contact, the spinning wrench can spin drill pipe in or out quickly and efficiently without damage to expensive drill pipe and without the hazards of the dangerous spinning chain.

SSW 10

Specifications: Size range 3 1/2 to 5 1/2 (89-140 mm) Air Pressure: 90-120 psi (6,2-8,6 bar) Air consumption:240 cfm (510 dm3/s) Speed (5 pipe): 80-100 RPM Stall torque (5 pipe):1000 ft lbs (1350

Nm) Weight: 810 lbs (368 kg)

Assembly number: (less rollers) 10426

SSW 40 Spinning WrenchDescription:

Roller Assembly

Pipe OD 3 1/2 4 4 1/2 5 5 1/2P/N 12035 12040 12045 12050 12055Proving the old saying that Good things come in small packages, the Varco SSW-40 is not only small in size but also the most powerful pneumatic spinning wrench on the market.Designed with the operator in mind, the controls are simple and positioned for ease of handling.An easy adjustment screw eliminates the need to change rollers and can accommodate drill pipe and drill collars from 3 to 9 OD.The SSW-40, proven and tested to Varcos strict standards for performance and reliability, revolutionizes old ideas about how a spinning wrench should look and work.The speed of the SSW-40s four drive rollers, powered by two motors, is precisely controlled by the operator to permit the slow walking in of drill collars or fast spinning in or out when tripping pipe.

SSW 40

In a typical spinning operation the rig hand swings the SSW-40 onto the pipe just above the joint upset. The clamp control is pulled and the throttle handle actuated to spin in or out with absolute precision.For added safety spin direction lockout feature is included to prevent spinning pipe in wrong direction.Specifications: Size Range : 3 to 9 (89-241 mm) Speed (5 pipe) : 120 RPM Stall Torque (5 Pipe) : 1100 ft lbs (1490 Nm) Air Pressure : 90-120 psi (6,2-8,6 Bar) Air Consumption : 250 cfm (530 l/s) Weight : 850 lbs (386 kg)Assembly number: 73109

Varco BJ

173 S

Spinning Wrenches, Torque Wrench

SSW 30 Spinning WrenchDescription:The hydraulically powered SSW 30 can spin drill pipe and drill collars from 2 7/8 to 9 1/2 O.D. with no adjustments necessary. Its abundant power will bump up shoulders tight enough so each joint is quickly torqued.This lightweight tool is narrower and has lower profile than previous spinning wrench designs. It achieves its compact shape by using one large cylinder for clamping instead of two.

Specifications: Size range 27/8 to 91/2 (73-241 mm) OD Normal operating pressure: 2000 psi (140

bar) Hydraulic power requirement: 29 to 45 GPM

(110-170 l/min) Speed 5 dia pipe): 100 RPM Stall torque (5 dia pipe): 900 to 1000 ft lbs

(1215-1350 Nm) Weight: 850 lbs (385 kg)

Assembly number: Closed center; 19000-6, open center: 19000-7

SSW 30pinning Wrenches, Torque Wrench

TW 61 Hydraulic Torque WrenchDescription:The Varco TW 61 makes-up and breaks-out drill pipe and drill collars from 4 to 8 OD. Torque is adjustable and can be pre-set to the required value. Upper and lower gripping structures provide the required torque. The TW 61 can rotate the tool joint pin up to 34, to produce the desired torque while providing its own back-up. A built-in tugger is provided to pull the TW61 back out of the way while lowering or raising pipe stands. The tugger can also be used to assist in pulling the TW61 to a storage position. The tool has 6-foot vertical travel range so it can locate at the exact tool joint height. The TW61 is human engineered with all controls on the front of the tool.

TW 61 Hydraulic torque wrench

Specifications: TW61: 4 to 8 (102-216 mm). Make-up Torque : 63,000 ft lbs (85000 Nm) Break-out Torque : 75,000 ft lbs (101000

Nm) Power requirements : 30-35 GPM (114-133 l/

min) @ 2000 psi (140 Bar) Air Pressure (for Tugger) 90-125 psi (6.2-8.6

Bar) Weight : 3190 lbs (1450 kg) Vertical Positioning (Total travel) 72 (1830

mm) Rate of Travel 2/Sec. Cycle Time : @40 GPM Clamping Both Jaws : 2.5 Seconds

Clamping Upper Jaw : 1.25 Seconds Torquing 34 : 2 Seconds

Assembly number : 19999-8

Varc

174o BJ

6600 and 6800 Kelly Spinners

6600 and 6800 Kelly Spinners

Description:Models 6600 and 6800 Kelly Spinners can be used for rotating drill pipe slowly, for limited rathole and mousehole drilling and making fast kelly connections. These units are completely reversible; the driller can spin out, as well as spin in, when making connections, therefore, spinning chains are not required.Specifications: Connections: 6 5/8 API Reg LH Height: 381/2 (978 mm) Diameter: 28 (711 mm) Weight:1110 lbs (504 kg) Oil grade and Capacity: SAE 40 4 1/4 gal

(4.8 l) Stall torque: 1200 ft lbs (1622 Nm) Speed: 110 RPM Flow (Air 6600) 320 cfm (680 dm3/s) Flow (Hydraulic 6800): 24 GPM (91 l/min) Rotation: Right & Left

Assembly numbers: Pneumatic Kelly Spinner model 6600complete with thread protectors, control valve, filter lubricator, and 62 foot hoses: 70876.Same as above with 77 feet hoses: 70877.Hydraulic Kelly Spinner model 6800 complete with thread protectors, control valve, filter lubricator, and 62 foot hoses: 70867.Same as above with 77 foot hoses: 70868Kelly Spinner

J175Jaw Assemblies HK 20000

Pipe Size P/N1(2 RequiIn. mm

3 1/2 88.9 200708

4 1/2 114.3 8547-52

4 3/4 120.7 8547-52

5 127.0 8547-52

5 1/2 139.7 8547-52

5 3/4 146.1 20069

6 152.4 8547-52

6 5/8 168.3 8547-52

7 177.8 8547-50

7 5/8 193.7 8547-50

8 5/8 219.1 8547-50

9 5/8 244.5 8547-50

10 3/4 273.1 8547-50

11 3/4 298.5 8547-50

12 304.8 8547-50

12 3/4 328.5 20069NOTES:1. 5 Dies for all sizes P/N 8500-5565

13 3/8 339.7 8547-50

14 355.6 8547-50red)Weight

Kg Lbs

-1 42 19.1

11 42 19.1

05 45 20.5

06 50 22.7

07 50 22.7

2 50 22.7

08 45 20.5

09 46 20.9

26 46 20.9

27 42 19.1

28 40 18.2

29 40 18.2

30 40 18.2

31 36 16.4

32 36 16.4

1 34 15.5 Varco B

HK 20000 Power Casing Tong

HK 20000 Power Casing Tong

Specifications: Size Range: 3 through 14 O.D. Torque, high gear 5000 ft. lbs. Speed, high gear 66 RPM Torque, low gear 21,500 ft. lbs. Speed, low gear 17 RPM (Max.) Intermittent torque 25,000 ft.lbs. Transmission, Two speed 4.12 to 1

Reduction Hydraulic power requirement: 66 gal/min

@ 1000 psi Weight 2200 lbs. Part number: 8532-5000-10 Suspension Spring assembly: 8532-5108 Tong torque assembly: 8532-5119

Hoses Couplings1 x 979490-50 2 x 55906-20

1 x 979491-50 2 x 55906-24

HK 2000033 34 15.5

34 34 15.5

Varc

176o BJ

Dynaplex Hooks, Perfection Links

Dynaplex Hooks, Perfection Links

The BJ Dynaplex Hook is a premium-quality rotary hook for heavy-duty drilling requirements. Special features: Hydraulic snubber, flexible pin connection and optional hook positioner. The optional hook positioner provides faster, safer operation and cuts down round-trip time. When going in the hole, the positioner automatically rotates the elevator into the correct position for the derrickman to catch the next stand of pipe. The positioner also prevents the hook and elevator from being rotated by the spin-up of drillpipe going in the hole. Operators may desire to direct-connect the Dynaplex hook to the traveling block; bail designs have been worked out in cooperation with the manufacturers of the more popular blocks.All standard block manufacturers have been furnished with the necessary dimensions for fitting their equipment to BJ hooks.

Dynaplex Hook

Specifications

Model CapacityTons

HookComplete

With Positioner

Hook Complete

Less Positioner51000 1000 38327Y

5750 750 31108Y

5500 500 26955Y 26955Y1

5350 350 24767Y 24977YPerfection LinksDependable, efficient Perfection links are designed for light loads. They are made by forging, bending and electric welding of high-quality steel bar stock, which is then heat-treated and magnafluxed.

Specifications

P/N SizeinSizemm

Rated Cap/Set Weight/Set

tons lb kg200450Y130 2x30 51x762 100 121 55

200450Y136 2x36 51x914 100 140 64

200450Y142 2x42 51x1070 100 162 74

200450Y148 2x48 51x1219 100 222 93

200450Y160 2x60 51x1524 100 222 101

Varco BJ

177Weldless Links

Weldless links are forged from a single piece of high-grade alloy steel to provide maximum tensile strength. More weight and plus-diameter in critical areas make these Varco BJ links extra strong. Short upper eye design means better balance and easier elevator handling, while reducing wear of the eye section against the swivel bail or body.Specifications Weldless Links

P/NSize

Rated Cap/Set

Weight/Set

in mm tons lb kg

16363Y1060 21/4 x60 57x1524 250 480 218

16363Y1072 21/4x72 57x1829 250 530 241

16363Y1084 21/4x84 57x2134 250 580 264

16363Y1096 21/4 x 96 57x2438 250 630 286

16363Y1108 21/4x108 57x2743 250 680 309

16363Y1132 21/4x132 57x3353 250 780 355

16363Y1168 21/4x168 57x4267 250 774 352

26940Y1060 23/4x60 70x1524 350 620 282

26940Y1072 23/4x72 70x1829 350 685 311

26940Y1084 23/4x84 70x2134 350 740 336

26940Y1096 23/4x96 70x2438 350 805 366

26940Y1108 23/4x108 70x2743 350 870 395

26940Y1120 23/4x120 70x3048 350 935 425

26940Y1132 23/4x132 70x3353 350 1000 454

26940Y1144 23/4x144 70x3688 350 1065 484

26940Y1132 23/4x132 70x3353 350 1000 454

26940Y1150 23/4x150 70x3810 350 1095 498

26940Y1168 23/4x168 70x4267 350 1190 541

26940Y1180 23/4x180 70x4572 350 1255 571

26940Y1192 23/4x192 70x4876 350 1320 600

26940Y1216 23/4x216 70x5486 350 1450 659

26940Y1240 23/4x240 70x6096 350 1580 718

26940Y1290 23/4x290 70x7366 350 1852 842

26940Y1360 23/4x360 70x9144 350 2156 980

26940Y1480 23/4x480 70x12192 350 2878 1308 Weldless Links

15386Y1108 108 350 ton special for TDS 4, 5, 6 920 418

25469Y1072 31/2x72 89x1829 500 704 320

25469Y1096 31/2x96 89x2438 500 1056 480

25469Y1108 31/2x108 89x2743 500 1450 659

25469Y1120 31/2x120 89x3048 500 1619 736

25469Y1132 31/2x132 89x3353 500 1670 759

25469Y1144 31/2x144 89x3688 500 1780 809

25469Y1160 31/2x160 89x4064 500 1927 876

25469Y1168 31/2x168 89x4267 500 2000 909

25469Y1180 31/2x180 89x4572 500 2110 959

25469Y1192 31/2x192 89x4826 500 2202 1001

25469Y1216 31/2x216 89x5486 500 2112 960

25469Y1240 31/2x240 89x6096 500 2596 1180

25469Y1264 31/2x264 89x6706 500 2882 1300

16143Y1360 31/2x360 89x9144 500 3568 1622

16143Y1144 43/4x144 121x3688 750 2312 1051

16143Y1160 43/4x160 121x4064 750 3178 1445

16143Y1180 43/4x180 121x4572 750 3900 1769

16143Y1216 43/4x216 121x5486 750 5200 2364

16143Y1240 43/4x240 121x6096 750 3892 1940

16143Y1264 43/4x264 121x6706 750 4268 1940

For Varco Type 1000 Ton Elevator/Spider Only:

70101Y1200 51/2x200 140x5080 1000 5100 2315

For BJ Type 1000 Ton Elevator/Spider Only:

38439Y1180 51/2x180 140x4572 1000 3500 1588

Weldless Links (Continued)

P/NSize

Rated Cap/Set

Weight/Set

in mm tons lb kg

Varc

178o BJ

Weldless Links

DimensionsWeldless Links

Dim. A B C D E F G H

in. 2 1/4 5 1/2 8 2 7/8 8 10 5 14

mm 57.2 139.7 203.2 73.0 203.2 254.0 127.0 355.6

in. 2 3/4 5 1/2 8 3 1/2 9 1/2 12 5 15,7

mm 69.9 139.7 203.2 88.9 203.2 254.0 127.0 355.6

in. 3 1/2 6 3/4 10 1/8 4 1/2 9 1/2 12,4 6 17

mm 88.9 171.5 257.2 114.3 241.3 204.8 152.4 431.8

in. 4 3/4 6 10 1/4 14 1/2 7 1/2 23

mm 120.7 152.4 260.4 368.3 190.5 548.2

in. 5 1/21

NOTES:1. Varco type

6 12 1/2 17 1/2 8 1/4 29 1/4mm 139.7 152.4 317.5 444.5 209.6 743.0

in. 5 1/22

2. BJ type

6 8 13 7 19

mm 139.7 152.4 203.2 330.2 177.8 482.6Varco BJ Weldless links 4 3/4 to 5 1/2Varco BJ Weldless links 2 3/4 to 3 1/2

Varco BJ

179Elevators

Slip Type Elevators Y SeriesVarco BJ Y series elevators are conventional slip type elevators for handling tubing and small casing. There are 7 types ranging from 20 to 200 ton capacity and covering pipe sizes from 1.050 to 7 5/8 OD. They feature a four slip design which give an optimum contact on the pipe to prevent bottlenecking and gauge damage.The Varco BJ YC type elevator is capable of handling dual tubing strings. All type Y series elevators operate with the latch lock combination for safety. The MYC and YC provide a 7 and the HYC a 10 1/2 of insert contact to grip your casing or tubing.

Collar Type Elevators A SeriesCenter-latch elevators are for handling collar-type drill pipe, casing and tubing. All A type elevators are constructed in two halves of practically the same weight, providing proper balance and easier opening and closing. In open position, the elevator hangs ready for closing at any point below the upset of the pipe. All A type elevators feature latch and safety latch lock combinations. Safety features include guarded operating handles to help prevent accidents to operators and an extra handle at the rear of the elevator

18 Type Elevators G SeriesG series elevators are similar in design and construction to the A series, except they are bored to fit the contour of 18 type drill pipe. They are constructed in two halves of practically the same weight for better balance, making them easier to handle; easier to latch on and take off the pipe. In open position, a G-series elevator hangs ready for closing at any point below the upset of the pipe. Safety features include guarded operating handles to help prevent accidents to operators and an extra handle at the rear of the elevator for easier, safer operation. Elevators

MGG Elevator

Air Operated ElevatorsVarco BJ offers a complete line of air operated elevators with rated capacities ranging from 150 to 500 ton capacity.The TA-150 is a center-latch elevator for handling zip groove drill collars from 4 3/4 to 11 1/2 with a capacity of 150 tons. The GG is a center-latch elevator for handling 18 degree external upset drill pipe from 4" to 5 1/2 with a rated capacity of 350 tons. The HGG handles the same pipes from 4 to 65/8 with a 500 ton rated capacity. The MGG is also a center latch elevator for handling 18 deg. external upset drill pipe sizes 3 1/2 to 5 1/2 with a rated capacity of 250 tons. The HYC is a slip type elevator to handle tubulars from 2 7/8 through 7 5/8 rated capacity 250 ton.

Varc

180o BJ

Elevators

18 Type Elevator BNC ModelThe BNC has a center latch elevator for handling 18 external upset drill pipe and tubing the inside surface of this elevator is induction hardened to provide maximum strength and long service.

Side Door Type Elevators X SeriesThe X-series elevators handle all sizes of collar-type tubing, drill pipe and casing. The SLX has a shielded safety latch mounted on the elevator door. The shield protects the latch from accidental opening. Both latches operate from a single handle, and then automatically relatch when the elevator door is closed. The Type SX side-door elevator, designed for handling large, collar-type casing, is a sturdier, safety-latch-equipped version of X-series elevators.

SLX ElevatorAuxiliary Elevators SJL and SPLSingle-joint, center-latch elevator designed to replace unsafe rope slings for hoisting collar-type pipe into position. The SJL type enables the crew to handle pipe properly, helps to avoid damage to pipe threads and reduces the chance of accident or injury. The SPL is the same as the SJL type except that the SPL is designed for use on tapered pipe.

DC Lift System

DC Lift Adapter Collar Type

150T for 3 1/2" EU & 3 1/2" IU103,

102 1 31189Y7

150T for 4 1/2" EU & 5" IEU 106 1 31189Y1

DC Lift Adapters 18 Type150T for 4" IU 121 1 31189Y9

150T for 4" EU & 4 1/2" IU, IEU 122 1 31189Y5

150T for 4 1/2" EU & 5" IEU 123 1 31189Y3

150T for 5 1/2" IEU 124 1 31189Y10150T for 3 1/2" EU & 4 1/2" EU, 5" IEU120,

123 1 31189Y12

150T for 6 5/8" IEU 655 1 31189Y15

Varco BJ

181Elevator Selection Chart

Elevator Selection

SizeType FrameNr.

Cap.Tons

WeightIn mm Lb kg

Slip Type Elevators Y Series1.050-2 1/16

27-52 LYT 28750 20 57 26

1.315-2 7/8

33-73 MYT 29328Y 40 148 67

1.315-3 1/2

33-89 YT 55600Y 75 355 161

2 3/8-3 1/2

60-89 HYT 39284Y 150 750 336

3 1/2-7 89-178 YC 24140Y 75 445 206

3 1/2-7 89-178 MYC 200360Y 125 750 336

2 7/8-7 5/8 89-194 HYC BJ55310Y 200 997 452

2 7/8- 7 5/8

89 HYC AO BJ70166Y 200 1465 665

Collar Type Center Latch Elevators Series1.050-2 7/8

27-73 TA 32387Y 35 39 18

1.660-2 7/8

42-73 TA 32385Y 65 65 29

3 1/2-4 1/2

89-114 TA 32386Y 65 83 38

2 3/8-2 7/8

60-73 TA 32383Y 100 100 45

3 1/2-5 89-127 TA 32384Y 100 158 72

4 3/4-8 5/8

121-219 TA 200000Y 100 410 186

4 1/2-8 5/8

114-219 TA 32754Y 150 430 195

4 3/4-8 5/8

121-219 TA AO 35636Y 150 530 240

8 1/2-11 1/4

216-286 TA 39342Y 150 430 195

8 1/2-11 1/4

216-286 TA AO 39343Y 150 550 250

2 3/8-4 1/2

60-114 RGA 201360Y 200 162 73

3 1/2-7 102-178 GA 200034Y 350 555 252

3 1/2-7 102-178 GA AO 200035Y 350 725 330

7-7 5/8 178-194 GGA 201385Y 350 695 316

7-7 5/ 178-194 GGA AO 201380Y 350 998 4548 Elevators

18 Center Latch Elevator G Series

2 3/8-5 60-127 MG 30157Y 100 200 91

2 3/8-3 1/2

60-89 RGG 200680Y 150 308 140

3 1/2-5 1/2

89-140 MGG 35005Y 250 575 261

3 1/2-5 1/2

89-140 MGG AO 36056Y 250 720 327

4-5 1/2 102-140 GG 31068Y 350 715 324

4-5 1/2 102-140 GG AO 35143Y 350 1018 463

4-6 5/8 102-168 HGG 70013Y 500 1000 454

4-6 5/8 102-168HGG AO 70222Y 500 1500 680

18 Center Latch Elevator G Series with wear bushing

3 1/2-5 1/2

89-140 MGG 200058Y 250 585 266

3 1/2-5 1/2

89-140 MGG AO 200057Y 250 730 332

4-5 1/2 102-140 GG 200056Y 350 725 329

4-5 1/2 102-140 GG AO 200024Y 350 1028 468

4 1/2-5 1/2

114-140 HGG 200060Y 500 1010 459

5-6 5/8 168 HGG 200062Y 500 1010 459

4 1/2-5 1/2

114-140 HGG AO 200059Y 500 1510 685

5-6 5/8 168HGG AO 200061Y 500 1510 685

Bottleneck Center Latch Elevator

4-5 1/2 102-140 BNC88425-50Y1 350 880 400

Elevator Selection (Continued)

SizeType FrameNr.

Cap.Tons

WeightIn mm Lb kg

Varc

182o BJ

Elevators

Elevator Selection Continued

SizeType FrameNr.

Cap.Tons

WeightIn mm Lb kg

COLLAR TYPE SIDE DOOR ELEVATORS X SERIES

1.660-2 7/8 42-73 SLX 33734Y 65 50 23

2 3/8-2 7/8 60-73 SLX 33693Y 100 75 34

3 1/2-4 89-102 SLX 33809Y 100 105 48

4 1/2-5 1/2 110-140 SLX 33854Y 100 175 79

5 1/2-8 5/8 140-219 SLX 31239Y 150 325 147

9 5/8-10 3/4

245-273 SLX 33950Y 150 420 191

11 3/4-13 3/8

298-340 SLX 33982Y 150 500 227

16 406 SLX 34087Y 150 575 261

18 5/8-20 473-508 SLX 33632Y 150 700 318

26-30 660-762 SLX DD 52755Y 150 1320 600

6 5/8-7 5/8 168-194 SSD 71273Y 250 600 273

8 5/8-10 3/4

219-273 SSD 71274Y 250 620 282

11 3/4-14 298-356 SDD 71275Y 250 635 289

18 5/8-20 473-508 SX 30598Y 250 1100 499

22-24 1/2 559-622 SLX 34175Y 250 1000 454

9 5/8-13 3/8

244-340 SX 29965Y 350 1200 544

9 5/8-13 3/8

244-340 SX 29964Y 500 1100 499

16 406 SX 30729Y 500 1200 544

AUXILIARY ELEVATORS S SERIES

2 3/8-3 1/2 60-89 SJL 70499Y 5 45 20

4-5 1/2 102-140 SJL 70500Y 5 51 23

6-7 5/8 152-194 SJL 70501Y 5 72 33

8 5/8-10 3/4

219-273 SJL 70502Y 5 98 44

11 3/4-13 3/8

298-340 SJL 70503Y 5 121 55

14 356 SJC 72782Y10 5 140 61

16-20 406-508 SJL 70504Y 5 210 95

21-24 1/2 533-622 SJL 70505Y 5 270 123

2 7/8-5 1/2 72-140 SPL 5200008

Y 5 77 35

5 1/2-7 5/8 140-194 SPL 5200010

Y 5 108 498 5/8-9 5/8 219-244 SPL 5200012

Y 5 145 66

9 7/8 251 SPL 5200029

Y 5 145 6610 3/4 273 SPL 5200013

Y 5 160 73

2 3/8-4 1/2 60-114 SPL 12200014

Y 5 86 39

2 7/8-5 73-127 SPL 18200009

Y 5 79 36

5 1/2-6 3/8 140-168 SPL 18200011

Y 5 94 43


Tapered Inserts for SPL Elevators (6 req.)Size Type Tap. insert

27/8 SPL 5 36184-278

31/2 SPL 5 36184-312

4 SPL 5 36184-400

41/2 SPL 5 36184-412

5 SPL 5 36184-500

51/2 SPL 5 36284-512

65/8 SPL 5 36248-658

7 SPL 5 36248-700

75/8 SPL 5 36248-758

85/8 SPL 5 36186-858

95/8 SPL 5 36186-958

103/4 SPL 5 36187-107

23/8 SPL 12 53614-238

27/8 SPL 12 53614-278

31/2 SPL 12 53614-312

4 SPL 12 53614-400

4 1/2 SPL 12 53614-412

2 7/8 SPL 18 36185-278

31/2 SPL 18 53185-312

5 SPL 18 53185-500

51/2 SPL 18 70253-512

6 5/8 SPL 18 70253-658

S SERIES LIFING SLING

23/8-24 1/2 34568Y5


SizeType FrameNr.

Cap.Tons

WeightIn mm Lb kg

Varco BJ

183Specifications Slips and Inserts Y-Series Elevators

Type Slip Insert no. QtyLYT

2 1/16 x 1.050 28745-7 29370 8

2 1/16 x 1.315 28745-2 28749 8

2 1/16 x 1.660 28745-3 28778 8

2 1/16 x 1.900 28745-4 28775 8

2 1/16 x 2.000 28745-5 28772 8

2 1/16 28745-6 28772 8MYT

2 7/8 x 1.315 29343Y7 29259 8

2 7/8 x 1.660 29343Y6 29258 8

2 7/8 x 1.900 29343Y5 29257 8

2 7/8 x 2.000 29343Y4 29256 8

2 7/8 x 2 1/16 29343Y3 29256 82 7/8 x 2 3/8 29343Y2 29255 8

2 7/8 29343Y1 24773 8

YT

2 7/8 x 1.315 23108Y11 29259 12

2 7/8 x 1.660 23108Y10 29258 22

2 7/8 x 1.900 23108Y9 29257 12

2 7/8 x 2 23108Y8 29256 12

2 7/8 x 2 1/16 23108Y7 29256 122 7/8 x 2 3/8 23108Y6 29255 12

2 7/8 23108Y4 24773 12

3 1/2 x 2 7/8 23108Y3 30358 24

3 1/2 23108Y5 24774 24

HYT

2 7/8 x 2 3/8 39259Y4 29255 16

2 7/8 39259Y2 24773 16

3 1/2 x 2 7/8 39258Y4 30358 32

3 1/2 39258Y2 24774 32 Elevators

Specifications Slips and Inserts Y-Series Elevators Continued

Type Slip Assy. Insert No. Qty Bottom GuideYC

4 1/2 x 3 1/2

34931Y 24779 16 26827-1

4 1/2 x 4 26830Y 24781 16 26827

4 1/2 24072Y5 16408 16 24071-4

5 1/2 x 5 24072Y7 24783 16 24071

5 1/2 24072Y2 16407 16 24071-1

7 x 6 5/8 24077Y7 24748 24 24071-3

7 24077Y1 16407 24 24071-2

HYC

2 7/8 201355Y 201356 24 201358

4 1/2 x 3 1/2

55509Y 24779 24 26827-1

4 1/2 x 4 55510Y 24781 24 26827

4 1/2 55511Y 16408 24 24071-4

5 1/2 x 5 55512Y 24783 36 24071

5 1/2 55513Y BJ16407 36 24071-1

7 x 6 5/8 55514Y 24748 48 24071-3

7 55515Y 16401 48 24071-2

7 5/8 70009Y 70010 48 24071-6

Varc

184o BJ

Bore Charts

Bore Charts

How to Use the Bore ChartsIn ordering all collar-type and 18 type BJ elevators for drill pipe, casing and tubing, first determine correct pipe size and corresponding elevator frame part number from specification tables on these pages. Then determine correct bore code from the bore charts on the following pages. Add this number to the frame part number for the complete elevator.Note that the bore diagrams give bore diagrams for all BJ elevators other than BJ 18 elevators.Drill Pipe Borecodes

Drill Pipe Size Type Upset Tool Joint

Bore Code 18 Tap.

Bore Code Collar

2 3/8

IU API Reg. 109

EU NC 26 (IF) 116 110

WO

OH

SL-H90

2 7/8

IU API Reg. 117 108

XH

EU NC 37 (IF) 118 101

WO

OH

SL-H90

3 1/2

IU API Reg. 119 102

API FH

EU NC 38 (IF) 120 103

WO

OH

SL-H90

4

IU NC 40 (FH) 121 104

H90

EU NC 46 (IF) 122 105

WO

OH

4 1/2

IU NC 46 (XH) 122(45)1

NOTES:1. Borecode BNC elevator.

105

IEU FH

H90

EU NC 50 (IF) 123(50)1 106

WO

OH

5

IEU NC 50 (XH) 123(50)1 106

4 1/2 (IF)

5 1/2 (FH)

5 1/2 IEU FH 124 (55)1 107

5 7/8IEU IF 678

IEU XT 789

6 5/8 IEU FH (8 3/4 TJ) 740

BJ

185Bores for special non-standardized drill pipe tooljoint combinations are available on request

MG A 4 1/4 4 3/4 4 3/4 5 1/2 5 1/2 6 1/2 6 3/4 7 1/8C 2 21/32 3 3/32 3 9/32 3 25/32 3 31/32 4 9/32 4 25/32 5 1/4D 4 3/4 4 3/4 4 3/4 4 3/4 4 3/4 4 3/4 5 1/4 5 1/4F 2 2 2 2 2 1 3/8 1 3/8 1 3/8G 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2

Frno 30156 30156 30156 30156 30156 23540 23540 23606 23606

RG A 4 1/4 4 3/4 4 3/4 5 1/2 5 1/2 6 1/2 6 3/4 7 1/8 7 7/8C 2 21/32 3 3/32 3 9/32 3 25/32 3 31/32 4 9/32 4 25/32 5 1/4 5 13/16D 4 3/4 4 3/4 4 3/4 4 3/4 4 3/4 5 3/4 5 3/4 7 7

F 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/8 1 3/8 1 3/8 1 3/8G 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2

Frno 35005 35005 35005 35005 35005 35005

MGG A 5 1/2 5 1/2 6 1/2 6 3/4 7 1/8 7 7/8B 3 25/32 3 31/32 4 9/32 4 25/32 5 1/4 5 13/16D 7 7 7 7 7 7

F 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2G 1 1 1 1 1 1

Frno 31068 31608 31608 31608

GG A 6 1/2 6 3/4 7 1/8 7 7/8C 4 9/32 4 25/32 5 1/4 5 13/16D 7 7 7 7

F 1 3/8 2 3/8 2 3/8 2 3/8G 1/2 1/2 1/2 5/8

Frno 70013 70013 70013 70013 70013 70013 70013

HGG A 6 1/2 6 3/4 7 1/8 7 7/8 8 7 7/8 8 7/8C 4 9/32 4 25/32 5 1/4 5 13/16 6 17/64 6 1/8 7 1/32D 7 7 7 7 7 7 7

F 1 3/8 2 3/8 2 3/8 2 3/8 1 1 1

G 1/2 1/2 1/2 5/8 2 1/2 2 1/2 2 1/2Drill Pipe Bore Chart

Drill Pipe Bore Chart

Bore Code 116 117 118 119 120

Type 2 3/8 EU 2 7/8 IU 2 7/8 EU 3 1/2 IU 3 1/2 EU 4

Frno 30157 30157 30157 30157 30157G Series elevators Varco

Drill Pipe Bore Chart

121 122 123 124 678 789 7404 IU 1/2 IU, IEU

4 EU 5 IEU

4 1/2 EU (FH) 5

1/2 EU 5 7/8 IF XT 57 6 5/8 FH

30157 30157 30157B Series elevators

Varc

186

11" 230 11 /32" /16" 11 /32"o BJ

Bore Chart

Bore Chart

Drill Collars with Zip Lift Recess Bore Chart

Drill Code OD Bore Code Top Bore A Bevel C

Bottom Bore B

4 1/8" 177 3 13/16" 1/16" 4 1/4"4 3/4" 435 4 3/8" 1/16" 4 7/8"5 1/4" 179 4 7/8" 1/16" 5 3/8"5 1/2" 180 5 1/8" 1/16" 5 5/8"5 3/4" 181 5 1/4" 1/16" 5 7/8"

6" 362 5 1/2" 1/16" 6 1/8"6 1/4" 337 5 3/4" 1/16" 6 3/8"6 1/2" 373 6" 1/16" 6 5/8"6 3/4" 387 6 3/16" 3/32" 6 7/8"

7" 361 6 7/16" 3/32" 7 1/8"

7 1/4" 357 6 11/16" 3/32" 7 3/8"7 1/2" 188 6 15/16" 3/32" 7 5/8"

7 3/4" 339 7 3/16" 3/32" 7 7/8"

8" 336 7 7/16" 3/32" 8 1/8"

8 1/4" 422 7 11/16" 3/32" 8 3/8"8 1/2" 426 7 15/16" 3/32" 8 5/8"

9" 427 8 3/8" 1/8" 9 1/8"

9 1/2" 370 8 7/8" 1/8" 9 5/8"

9 3/4" 367 9 1/8" 1/8" 9 7/8"

10" 195 9 3/8" 1/8" 10 1/8"

10 3/4" 527 10 1/8" 1/8" 10 7/8"

11" 419 10 3/8" 1/8" 11 1/8"

11 1/4" 196 10 5/8" 1/8" 11 3/8"Plain Drill Collars with Lift Plugs Bore Chart

Drill Code OD Bore Code Top Bore A Bevel C

Bottom Bore B

2 1/2" 201 2 21/32" 1/16" 2 21/32"2 3/4" 203 2 29/32" 1/16" 2 29/32

3" 205 3 5/32" 1/16" 3 5/32"3 1/8" 206 3 9/32" 1/16" 3 9/32"3 1/4" 207 3 13/32" 1/16" 3 13/32"3 1/2 209 3 21/32" 1/16" 3 21/32"3 3/4" 211 3 29/32" 1/16" 3 29/32"

4v 213 4 5/32" 1/16" 4 5/32"4 1/8" 519 4 9/32" 1/16" 4 9/32"4 1/4" 548 4 13/32" 1/16" 4 13/32"4 1/2" 215 4 21/32" 1/16" 4 21/32"4 3/4" 354 4 15/32" 1/16" 4 15/32"

5" 552 5 3/16" 1/16" 5 3/16"5 1/4" 219 5 7/16" 1/16" 5 7/16"5 1/2" 411 5 11/16" 1/16" 5 11/16"5 3/4" 222 5 31/32" 1/16" 5 31/32"

6" 349 6 7/32" 1/16" 6 7/32"6 1/4" 348 6 15/32" 1/16" 6 15/32"6 3/8" 331 6 19/32" 1/16" 6 19/32"6 1/2" 135 6 23/32" 1/16" 6 23/32"6 3/4" 338 7" 1/16" 7"

7" 372 7 1/4" 1/16" 7 1/4"7 1/4" 335 7 1/2" 1/16" 7 1/2"7 1/2" 137 7 3/4" 1/16" 7 3/4"

7" 550 8" 1/16" 8"8" 334 8 1/4" 1/16" 8 1/4"

8 1/4" 347 8 1/2" 1/16" 8 1/2"8 1/2" 580 8 25/32" 1/16" 8 25/32"8 3/4" 226 9 1/32" 1/16" 9 1/32"

9" 356 9 9/32" 1/16" 9 9/32"9 1/4" 227 9 17/32" 1/16" 9 17/32"9 1/2" 346 9 25/32" 1/16" 9 25/32"10" 228 10 11/32" 1/16" 10 11/32"

10 1/2" 229 10 27/32" 1/16" 10 27/32"11 1 11

J187 Tubing, Collar T

Tubing, Collar Type Drill Pipe, Casing Bore Charts

Tubing Bore Chart

Tubing Size Style Bore Code

Top Bore A

Bottom Bore B

1.050" PlainUpset Tbg.150151

1 5/32"1 13/32"

1 13/32"1 13/32"


1 13/32"1 19/32"

1 19/32"1 19/32"


1 3/4"1 29/32"

1 29/32"1 29/32"


2"2 3/16"

2 3/16"2 3/16"

2 3/8"PlainUpset Tbg.

158159

2 15/32"2 23/32"

2 11/16"2 23/32"


160161

2 31/32"3 7/32"

3 3/16"3 7/32"


162163

3 19/32"3 27/32"

3 27/32"3 27/32"

4" PlainUpset Tbg.164165

4 3/32"4 11/32"

4 11/32"4 11/32"


129167

4 19/32"4 27/32"

4 27/32"4 27/32"

Collar Type Drill Pipe Bore Chart

Bore Code Top Bore A Bottom Bore B

101 3 3/8" 3 1/8"

102 3 3/16" 3 3/4"

103 4 1/16" 3 3/4"104 4 5/16" 4 1/4"

105 4 13/16" 4 3/4"

106 5 5/16" 5 1/4"

107 5 7/8" 5 13/16"

108 3 1/8" 3 1/8"

109 2 5/8" 2 5/8"

110 2 3/4" 2 3/4"

111 3 1/2" 3 1/2"

112 3 1/16" 3 1/16"113 5 11/16" 5 11/16"114 6 1/4" 6 1/4" Varco B

ype Drill Pipe, Casing Bore Charts

Casing Bore Chart

Casing Size Bore Code Top Bore A Bottom Bore B4 1/2 129 4 19/32 4 27/324 3/4 167 4 27/32 4 27/32

5 131 5 3/32 5 3/325 1/2 132 5 5/8 5 5/85 3/4 133 5 7/8 5 7/8

6 134 6 1/8 6 1/86 5/8 135 6 3/4 6 3/4

7 136 7 1/8 7 1/87 5/8 137 7 3/4 7 3/47 3/4 705 7 7/8 7 7/88 1/2 646 8 21/32 8 21/328 5/8 139 8 25/32 8 25/32

9 140 9 5/32 9 5/329 5/8 141 9 25/32 9 25/329 7/8 649 10 1/32 10 1/3210 3/4 142 10 29/32 10 29/3211 3/4 143 11 15/16 11 15/1611 7/8 729 12 1/16 12 1/1612 3/4 345 12 15/16 12 15/1613 3/8 144 13 9/16 13 9/1613 5/8 596 13 13/16 13 13/16

14 690 14 13/64 14 13/64

16 145 16 7/32 16 7/32

18 723 18 1/4 18 1/418 5/8 146 18 7/8 18 7/8

20 147 20 1/4 20 1/421 1/2 148 21 25/32 21 25/32

22 688 22 9/32 22 9/32

24 630 24 5/16 24 5/1624 1/2 149 24 13/16 24 13/16

26 650 26 11/32 26 11/32

28 693 28 23/64 28 23/64

30 644 30 3/8 30 3/8

Varc

188o BJ

Flush Mounted Slip

Flush Mounted Slip

Flush Mounted Slip FMS 375, 500 Ton 14The FMS 375, is mounted flush with the rig floor, allowing the casing connection height to be lowered to 1 meter (3 feet), eliminating the need for scaffolding. The rig crew also has more room to work by removing the spider body from the top of the rig floor. It is designed to fit into the opening of standard 37 1/2 & 49 1/2 (with adapter bushing) rotary tables. The unit requires a 2000 psi and 32 GPM hydraulic system for smooth, consistent and reliable operation. The slips utilize the full range of slip assemblies and guides, 4 1/2 to 14, as used in the existing Varco SL type 500 ton elevator/spider. With top and bottom guides and the hydraulic power down feature for setting of the slip assemblies, the FMS 375 centers casing in the rotary, the slip power down feature allows the spider to take the torque reaction of the tong when the string weight only is not sufficient enough to resist rotating. The unit consists of two hinged body halves and top mounted lifting lugs, which allows the spider to be removed from the rotary table should this become necessary when the casing string is suspended from the elevator. The hydraulic connections and lubrication points are all located at the top of the spider, which allows quick hydraulic connection and easy maintenance while mounted in the rotary. A sturdy top cover allows roughnecks to work safely around the well bore during the casing job. Body Part number 200930-10FMS 375, Flush Mounted SlipFlush Mounted Slip FMS 375, 500 Ton 14

Pipe SizeTop

Guide for Casing

Bottom Guide Casing

Slip Set with

InsertsInsert Set

5 1/2 x 4 1/2 18419-1 11787 13842Y3 2168-16B-32

5 1/2 x 5 18419-2 11788 13842Y2 2169-16B-32

5 1/2 18419-3 11789 13842Y1 2170-48

7 5/8 x 6 5/8 18419-4 11791 13841Y3 2632-24B-48

7 5/8 x 7 18419-4 11791 13841Y2 2623-24B-48

7 5/8 18419-5 11792 13841Y1 2633-72

9 5/8 x 8 5/8 18419-6 11793 13840Y3 2640-32B-64

9 5/8 18419-7 11794 13840Y1 2633-96

9 5/8 x 10 18419-15 11794 81268Y 2633-96

11 3/4 x 10 3/4 18419-8 11795 13839Y3 2640-40B-80

11 3/4 18419-9 11796 13839Y2 2637-120

11 3/4 x 12 18419-14 71229 71763Y1 2651-120

14 x 13 3/8 18419-10 71228 70734Y5 2636-40B-80

14 x 13 5/8 18419-12 11797 70734Y3 2653-40B-80

14 18419-11 15939 70734Y1 2635-120

Hydraulic Working

Pressure (PSI)Power Down Force

(Tons)Applied Maximum Back-up Torque

(Ft Lbs)2500 46 35000

2200 40 30800

2000 36 28000

1800 33 25200

1600 29 22400

1400 25 19600

1200 22 16800

1000 18 14000

FMS Adapter Plates

Brand P/NOilwell 200990-11

Emsco 200991-11

National 200995-11

Ideco 201430-1

Varco BJ

189Casing Elevators/Spiders

350 Ton Elevator/Spider 4 1/2 To 14 Varco Type

P/N Description

11776 Elevator/Spider Less Slips and Guides 3900 lb (1769kg)

11798 Bell Guide Kit 400 lb (181kg)

19276 Spider Adapter Plate 700 lb (318kg)

11881 Airline and Filter assembly

Casing Size (In.)

Elevator Bottom Guide P/N

Spider Top

Guide P/N

Slip Set With

Inserts P/N

Insert Se1P/N

NOTES:1. Numbers followed by the letter B indicate beveled in-

serts (required at top and bottom of each slot).

Qty.

4 1/2 11787 V18419-1 11865 2168-16B-24 40

5 11788 V18419-2 11864 2169-16B-24 40

5 1/2 11789 V18419-3 11863 2170-40 40

6 5/8 11791 18419-4 11861 2632-24B-36 60

7 11791 18419-4 11860 2623-24B-36 60

7 5/8 11792 18419-5 11859 2633-60 60

7 3/4 11792 18419-5 71592-1 2649-60 60

8 5/8 11793 18419-6 11857 2640-32B-48 80

83/4 11793 18419-6 71591-3 2650-32B-48 80

9 5/8 11794 18419-7 11856 2633-80 80

9 3/4 71231 18419-15 71591-2 2649-80 80

9 7/8 71231 18419-15 71591-1 2649-80 80

10 3/4 11795 18419-8 11854 2640-40B-60 100

10 7/8 11795 18419-8 71590-1 2650-40B-60 100

11 3/4 11796 18419-9 11853 2637-100 100

11 7/8 11796 18419-9 71590-2 2651-100 100

13 3/8 11797 18419-10 70732-5 2636-40B-60 100

13 1/2 71228 18419-12 70732-4 2652-40B-60 100

13 5/8 71228 18419-12 70732-3 2653-40B-60 100

13 3/4 71228 18419-12 70732-2 2655-40B-60 100

14 15939 18419-11 70732-1 2635-100 100 Casing Elevators/Spiders


P/N Description13800Y Elevator/Spider Less Slips and Guides 5000 lb (2268 kg)

11798 Bell Guide Kit 400 lb (181 kg)

19276 Spider Adapter Plate 700 lb (318 kg)


Casing Size (in.)


Spider Top

Guide P/N

Slip Set with

Inserts P/N

Insert Set1 P/N

NOTES:

Qty.

4 1/2 11787 V18419-1 13842Y32168-16B-

32 48

5 11788 V18419-2 13842Y2 2169-16B-32 48

5 1/2 11789 V18419-3 13842Y1 2170-48 48

6 5/8 11791 18419-4 13841Y32632-24B-

48 72

7 11791 18419-4 13841Y2 2623-24B-48 72

7 5/8 11792 18419-5 13841Y1 2633-72 72

7 3/4 11792 18419-5 13841Y4 2649-72 72

8 5/8 11793 18419-6 13840Y32640-32B-

64 96

8 3/4 11793 18419-5 13840Y52650-32B-

64 96

9 5/8 11794 18419-7 13840Y1 2633-96 96

9 3/4 71231 18419-15 13840Y4 2649-96 96

9 7/8 71231 18419-15 13840Y2 2649-96 96

10 3/4 11795 18419-8 13839Y32640-40B-

80 120

10 7/8 11795 18419-8 13839Y42650-40B-

80 120

11 3/4 11796 18419-9 13839Y2 2637-120 120

11 7/8 11796 18419-9 13839Y1 2651-120 120

13 3/8 11797 18419-10 70734Y52636-40B-

80 120

13 1/2 71228 18419-12 70734Y42652-40B-

80 120

13 5/8 71228 18419-12 70734Y32653-40B-

80 120

13 3/4 71228 18419-12 70734Y22655-40B-

80 120

14 15939 18419-11 70734Y1 2635-120 1201. Numbers followed by the letter B indicate beveled in-serts (required at top and bottom of each slot).

Varc

190o BJ

Casing Elevators/Spiders

500 Ton Elevator/Spider Varco Type

500 Ton Elevator/Spider 16 to 24 1/2 Varco Type

P/N Description

15740Y Elevator/Spider Less Slips and Guides 10,500 lb (4763 kg)


16552 Spider Adapter Plate 2700 lb (1225 kg)


Casing Size (In.)


Spider Top

Guide P/N

Slip Set With

Inserts P/N

Insert SetP/N Qty.

16 16184 73138 15790Y6 2636 180

18 15794-6 73139-6 15790Y4 2635-180 180

18 5/8 15794 73137 15790Y3 13868-4201

NOTES:1. Circular buttons used for 18 5/8 casing.

420

20 15793 73136 15790Y2 2635-180 180

22 50006055 50006074 15790Y5 2635-180 180

24 15792 73135 15790Y1 2635-180 180

24 1/2 74818 74817 15226Y1 2635 180500 Ton Hydraulic Operated Elevator/Spider1, 2, 3

NOTES:1. Uses same size components as air operated version. 16

slips made before May 2002 cannot be used in hydraulic Elevator/Spider.

2. Uses same controls of BX & PS3. Complete with pipe detectors and feedback signals

P/N

4 1/2" - 14"ElevatorElevatorSpider

50006046Y with auto setting system50006046Y2 without auto setting system50006046Y1

16" - 24 1/2"ElevatorElevatorSpider


750 Ton Hydraulic Operated Elevator/Spider

P/N

4 1/2" - 14"ElevatorElevatorSpider


16" - 24 1/2"ElevatorElevatorSpider


J191Casing Elevators/Spiders


P/N Description

16150Y Elevator/Spider Less Slips and Guides 7500 lb (3402 kg)


17163 Spider Adapter Plate 1800 lb (816kg)


Casing Size (in.)

Elevator Bottom GuideP/N

Spider Top

Guide P/N

Slip Set with

Inserts P/N

Insert Set1P/N

NOTES:1. Numbers followed by the letter B indicate beveled in-

serts (required at top and bottom of each slot)

Qty

6 5/8 11791 18419-4 16182Y4 2632-24B-60 84

7 11791 18419-4 16182Y8 2623-24B-60 84

7 5/8 11792 18419-5 16182Y7 2633-84 84

7 3/4 11792 18419-5 16182Y21 2649-84 84

8 5/8 11793 18419-6 16182Y6 2640-32B-80 112

8 3/4 11793 18419-6 16182Y20 2650-32B-80 112

9 5/8 11794 18419-7 16182Y3 2633-112 112

9 3/4 71231 18419-15 16182Y19 2649-112 112

9 7/8 71231 18419-15 16182Y18 2649-112 112

10 3/4 11795 18419-8 16182Y5 2640-40B-100 140

10 7/8 11795 18419-8 16182Y17 2650-40B-100 140

11 3/4 11796 18419-9 16182Y2 2637-140 140

117/8 11796 18419-9 16182YY16 2651-140 140

13 3/8 11797 18419-10 16182Y10 2637-140 140

13 1/2 71228 18419-12 16182Y12 2652-40B-100 140

13 5/8 71228 18419-12 16182Y11 2653-40B-100 140

13 3/4 71228 18419-12 16182Y13 2655-40B-100 140

14 15939 18419-11 16182Y9 2635-140 140750 Ton Elevator/Spider VarcoType Varco B


750 Ton Elevator/Spider 16 To 24 1/2 Varco Type

P/N Description

16180 Elevator/Spider Less Slips and Guides 12,000 lb (5443 kg)19001 Bell Guide Kit 600 lb (272 kg)16552 Spider Adapter Plate 2700 lb (1225 kg)11881 Airline and Filter assembly

Casing Size (in.)


Elevator Top

Guide P/N

Slip Set Inserts

P/N

Insert Set Inserts

P/NQty.

16 16184 73138 16181 2635-210 21018 5/8 15794 73137 16179 13868-5101

NOTES:1. Circular buttons used for 18 5/8 casing.

510

20 15793 73136 16178 2635-210 21024 15792 73135 16900 2635-210 210

1000 Ton Capacity 8 5/8 To 20 Varco Type

P/N Description

70100 Elevator/Spider Less Slips and Guides 19,025 lb (8629kg)73886 Bell Guide Kit (5 5/8-14) 790 lbs (358 kg)70262 Bell Guide Kit (16-20) 340 lbs (154 kg)70819 Spider Adapter Plate 340 lb (154 kg)11881 Airline and Filter assembly

Casing Size (In.)


Spider Top

Guide P/N

Slip Set With

Inserts P/N

Insert Set1P/N Qty.

8 5/8 11793 70102-7 70916 2640-24B-84 108

8 3/4 11793 70102-8 70916 2650-24B-84 108

9 5/8 11794 70102-1 70263 2633-108 108

9 3/4 71231 70102-9 74445 2649-108 108

9 7/8 71231 70102-9 74445 2649-108 108

10 3/4 11795 70102-2 70264 2640-36B-144 180

11 3/4 11796 70102-3 70265 2637-180 180

11 7/8 11795 70102-10 70265 2651-180 180

13 3/8 11797 70102-11 70906 2636-48B-192 240

13 1/2 71228 70102-12 75223 2652-48B-192 240

13 5/8 71228 70102-13 75223 2653-48B-192 240

13 3/4 71228 70102-18 75223 2655-48B-192 240

14 15939 70102-4 70266 2637-240 24016 70199 70102-5 70267 2637-300 300

18 5/8 70891 70102-14 70910 13868-7202 720NOTES:1. Numbers followed by the letter B indicate beveled in-

serts (required at top and bottom of each slot).2. Circular buttons used for 18 5/8 casing.

20 70201 70102-6 70268 2635-300 300

Varc

192o BJ


Order as a Guide Plate Assembly, except when no body guide plate is required, then order door guide plate only.

250 Ton Elevator/Spider 2 3/8 to 7 5/8 BJ Type

P/N Description

50364 Body Assembly Complete less Slip & Guide Plate Assemblies (Manual Only)

31021 Guide Bell Assembly

50422-2 Upper Guard Assembly

31008 Spider Adapter Plates

API Pipe Size Guide Plate Slip Assembly

with Inserts

Inserts QtyIn. mm Assembly 11

NOTES:1. Guide Plate Assembly (Spider).

Assembly 22

2. Guide Plate Assembly (Elevator).

2 3/8 60.33 51925 51920 50378-9 24777 18

2 7/8 73.03 51925 51920 50378-5 25780 18

3 1/2 88.90 51925 51920 50378 16441 18

3 1/2 88.90 51926 51921 50375-8 24779 27

4 101.60 51926 51921 50375-4 24781 27

4 1/2 114.30 51926 51921 50375 16408 27

4 1/2 114.30 51927 51922 50372-8 24785 27

5 127.00 51927 51922 50372-4 24783 27

5 1/2 139.70 51927 51922 50372 16407 27

6 5/8 168.28 51928 51924 50369-8 25474 45

7 177.80 51928 51924 50369-5 26750 45

7 5/8 193.68 51928 51924 50369 16407 45350 Ton Elevator/Spider 4 1/2 to 13 3/8 BJ Type

P/N Description Weight 3050 lb (Man.) 3500 lb (Air)

33492 Body Assy. Complete Less Slip,Guide Plate & Air Supply Hose Assemblies (Air)

34301 Body Assembly Complete Less Slip & Guide Plate Assemblies (Manual)28599 Casing Guide Bell Assembly

28570-1 Upper Guard Assembly27000 Spider Adapter Plate 27 1/2 RT31100 Spider Adapter Plate 37 1/2 RT (except EMSCO)32698 Spider Adapter Plate 37 1/2 RT EMSCO

Api Pipe Size Spider Guide Plate Assy.

Elevator Guide Plate Assy.

Slip Assy. With

InsertsInserts Qty.

in. mm

4 1/2 114.30 51949 51936 28556-8 24785 36

5 127.00 51950 51936 28556-4 24783 365 1/2 139.70 51950 51936 28556 16407 36

5 3/4 146.05 51951 51937-1 28551-10 29254 48

6 152.40 51951 51937-1 28551-8 24785 486 5/8 168.28 51952 51937 28551-3 24748 48

6 5/8 168.28 51952 51937 28546-8 25474 60

7 177.80 51952 51937 28551 16407 487 177.80 51952 51937 28546-5 26750 60

7 5/8 193.68 51953 51938 28546 16407 60

7 5/8 193.68 51953 51938 28541-8 25474 60

8 5/8 219.08 51954 51939 28541 15660 72

8 5/8 219.08 51954 51939 28536-8 25474 72

9 5/8 244.48 51955 51940 28536 15660 72

9 5/8 244.48 51955 51940 28531-11 33249 72

10 3/4 273.05 51956 51941 28531 15660 72

10 3/4 273.05 51956 51941 28526-8 25474 72

11 3/4 298.45 51957 51942 28526 15660 72

12 3/4 323.85 51958 28571 28521-5 32700 84

13 3/8 339.73 51958 28571 28521 15660 84350 Ton Elevator/Spider BJ Type

Varco BJ

193500 Ton Elevator/Spider 4 1/2 to 13 3/8 BJ Type


32664-1 Body Assembly Complete Less Slip, Guide Plate & Air Supply Hose Assemblies (Air)

32664 Body Assembly Complete Less Slip & Guide Plate Assemblies (Manual)

28599 Casing Guide Bell Assembly

32683-1 Upper Guard Assembly

27000 Spider Adapter Plate 27 1/2 RT

31100 Spider Adapter Plate 37 1/2 RT (except EMSCO)

32698 Spider Adapter Plate 37 1/2 RT EMSCO

API pipe size Spider Guide Plate Assy.


Slip Assy. with

InsertsInserts Qty.

in mm

4 1/2 114.30 51949 51936 52551-8 24785 45

5 127.00 51950 51936 52551-4 24783 45

5 1/2 139.70 51950 51936 52551 16407 45

6 5/8 168.28 51952 51937 52552-8 25474 75

7 177.80 51952 51937 52552-5 26750 75

7 5/8 193.68 51953 51938 52552 16407 75

8 5/8 219.08 51954 51939 52553-8 25474 90

9 5/8 244.48 51955 51940 52553 15660 90

10 3/4 273.06 51956 51941 52554-8 25474 105

11 3/4 298.45 51957 51942 52554 15660 105

12 3/4 323.85 51958 28571 52555-5 32700 135

13 3/8 339.73 51958 28571 52555 15660 135 Casing Elevators/Spiders

500 Ton Elevator/Spider BJ Type

500 Ton Elevator/Spider 12 3/4 24 1/2 BJ Type


51729 Body Assembly Complete Less Slip & Guide Plate Assemblies (Air)

51729-1 Body Assembly Complete Less Slip & Guide Plate Assemblies (Manual)

51725 Casing Guide Bell

51797 Upper Guard Assembly




Slip Assy. with

InsertsInserts Qty.

in mm

12 3/4 323.85 51977 51968 52531-10 39290 135

13 3/8 339.73 51976 51967 52531-5 32700 135

13 5/8 346.08 51976 51967 52531-3 39287 135

14 355.60 51975 51966 52531 15660 135

16 406.40 51974 51965 52532 51223 165

18 5/8 473.08 51973 51964 52533-11 32561 195

20 508.00 51972 51962 52533 32186 195

22 558.80 51971 51961 52534 51222 225

24 609.60 51970 51960 52535 51221 225

24 1/2 622.30 51969 51235 52536 51790 225

Varc

194o BJ


1000 Ton Elevator/Spider 7 5/8 14 BJ Type

P/N Description Weight 7000 lb (Air)

38777 Body Assembly Complete Less Slip & Guide Plate Assemblies (Air)

38795 Casing Guide Bell Assembly

39041 Upper Guard Assembly


31100 Spider Adapter Plate 37 1/2 RT (except EMSCO)

32698 Spider Adapter Plate 37 1/2 RT EMSCO



Slip Assy. with

Inserts

In-serts Qty.in. mm

7 5/8 193.68 51953 51943 38764-10 39290 108

8 5/8 219.08 51954 51944 38764-2 39286 108

9 5/8 244.48 51955 51945 38763-10 39290 126

10 3/4 273.05 51956 51946 38763-1 39285 126

11 3/4 298.45 51957 51947 38762-6 39289 144

12 3/4 323.85 51958 51948 38761-10 39290 162

13 3/8 339.73 51959 38788 38761-5 32700 162

14 355.60 51959 38788 38761 15660 162

Air Supply Hose Assembly

350 Ton 500 Ton 500 Ton

1000 Ton13 3/8 24

Elevator 52384 52384 52383 52383

Spider 23602 23602 52382 52382

Varco BJ

195CU, CUL & CB Casing Bushings

DescriptionCU, CUL and CB Casing Bushings are inserted directly into the rotary table and insure that the casing being run is perfectly aligned with the center of the hole. Models CU and CUL are solid bushings and Model CB is a split bushing. All of the bushings accept bowls of different sizes to accommodate a wide range of casing. Using CMS-XL or CP-S slips, since these bushings fit into the rotary table, the casing string can be easily rotated during cementing operations.

CU, CUL & CB Casing Bushing

Rotary Table Size (in.)

Make Casing Size (in.)

Casing Bushing &

Insert Bowl(P/N)

Weight lbs. (kg)

17 1/2 -20 1/2

ALL11 3/4 & 13 3/8 CU (3102) 470 (213)

9 5/8 & 10W/bowl No.

2 (1902) 342 (155)

26 &27 1/2

ALL

18 5/8 & 20 CUL(3103) 938 (425.5)

16W/bowl 20x16 (3104)

562 (255)

11 3/4 & 13 3/8W/bowl No.

1 (3105) 846 (384)

9 5/8 & 10 W/bowl No.

2 (1902) 342 (155)

2 3/8 & 8 5/8W/bowl No.

3 (1809) 464 (210.5)

27 1/2ALL

27 1/2API

18 5/8 & 20 CB (6695) 713 (323)

16 W/bowl 20 x 16 (6127) 572 (259)

11 3/4 & 13 3/8 W/bowl No.

1 (6126) 895 (406)

9 5/8 & 10 W/bowl No.

2 (6114) 252 (114)

37 1/2 -49 1/2

NATIONAL

30 CB (V11763) 1100 (499)

26 CB (16454) 1100 (499)

24 CB (11253) 1200 (544)

23 CB (11252) 1200 (544)

18 5/8 & 20 CB (10187) 1600 (726)

16 W/bowl 20 x 16 (6127) 572 (259)

11 3/4 & 13 3/8W/bowl No.

1 (6126) 895 (406)

9 5/8 & 10 W/bowl No.

2 (6114) 252 (114) CU, CUL & CB Casing Bushings

CU Casing Bushing

CUL Casing Bushing

Varc

196o BJ

CU, CUL & CB Casing Bushings

CU, CUL & CB Casing Bushing

Rotary Table Size (in.)

Make Casing Size (in.)

Casing Bushing &

Insert Bowl (P/N)

Weight lbs. (kg)

37 1/2 -49 1/2

EMSCO

30 CB (11633) 1160 (526)

26 CB (89183-1) 1100 (500)

24 CB (16542) 1260 (571.5)

22 CB(11252-22) 1120 (509)

18 5/8 & 20

CB (11553) S/N 49 & above for 37 1/2 only

1610 (730)

(10190) S/N 48 & be-low for 37

1/2 only

1820 (825.5)

16 W/bowl 20 x16 (6127) 572 9259)

11 3/4 & 13 3/8W/bowl No.

1 (6126) 895 (406)

9 5/8 & 10 3/4W/bowl No.

2 (6114) 252 (114)

37 1/2 - 49 1/2

OILWELL

30 CB (12093) 1170 (531)

26 CB (6170-26) 1100 (500)

24 CB (6170) 1260 (571.5)

18 5/8 & 20 CB (10188) 1670 (759)

16W/bowl 20x16 (6127)

572 (259)

11 3/4 & 13 3/8W/bowl No.

1 (6126) 895 (406)

9 5/8 & 10 3/4W/bowl No.

2 (6114) 252 (114)

37 1/2 IDECO

30 CB (12092) 1100 (499)

26 CB(74814-26) 1452 (605)

24 1/2 CB (74814) 1560 (650)

20 5/8 & 20 CB ( 10189)1670

(757.5)

16 W/bowl 20 x16 (6127) 572 259)

11 3/4 & 13 3/8W/bowl No.

1 (6126) 895 (406)CB Casing Bushing

Varco BJ

197Casing Spiders and Slips

Casing SpidersThe Baash-Ross 200 ton Hinged Casing Spider will fit most casing handling operations. It can be placed on the rotary table, mounted on a platform which replaces the rotary table, or supported by cribbing, depending upon the auxiliary equipment and procedure to be followed.

Baash-Ross 200 Ton Hinged Casing Spider Casing Spiders and Slips

UC-3 Casing SlipsMost casing strings weight and the relatively thin pipe wall make it important that the supporting slips provide full circumferential grip. The BAASS-ROSS Type UC-3 slips achieves this with many norrow segments. They are hinged together to wrap around the casing and exert a more uniform pressure. With each segment carrying the same load, they automtically center the casing string within the bushing or spider. The UC-3 has a 3 taper. With changes in the number of segments and liners, it will handle strings from 16 OD to 42 OD. Liners are held in place by a liner Retainer Key and Cotter Pin.

UC-3 Casing Slips

198

Varco BJ

Casing Spiders and Slips

200 Ton Hinged Casing Spiders

Csg.Size UC-3 Slip No. Wt. lb

30 Spider 7704-A-161 Wt. lb 1200

36 Spider 7704-A-167

Wt. lb 1100

42 Spider 7704-A-179

Wt. lb 1525

16 7704-5036 151

Bushing

9757704-A-165

Retainers

900054-740

18 5/8" 7704-5035 143

Bushing

900

Bushing

11357704-A-164 7704-A-172

Retainers Retainers

900042-706 900054-560

20 7704-5034 283

Bushing

900

Bushing

11357704-A-164 7704-A-172

Retainers Retainers

900042-706 900054-560

22 1/2 7704-5002 359

Bushing

750

Bushing

9247704-A-163 7704-A-171

Retainers Retainers

939097-156 900041-441

24 7704-5001 312

Bushing

750

Bushing

9247704-A-163 7704-A-171

Retainers Retainers

939097-156 900041-441

26 7704-5006 325

Bushing7704-A-162Retainers

939097-106

605

Bushing

8177704-A-170

Retainers

900042-186

30 7704-5005 367

Use 30Spider

Bushing

640

Bushing

14007704-A-169 7704-A-180

Retainers Retainers

939097-136 900042-708

33 7704-5008 410

Bushing

5007704-A-168

Retainers

939097-76

36 7704-5007 437

Use 36 Bushing

1226

Spider 7704-A-178

Retainers

939097-156

42 7704-5019 495Use 42

Spider

Varco BJ

199Roller Kelly Bushing

27 XHDP Roller Kelly BushingFor extreme high-torque drilling. Essentially two HDP bushings combined into one unit, this tool reduces wear to kelly and itself through wider force distribution. For master bushings with 25 pin circle. Unit comes with wrench, wiper and wear gauge. Weight 2850 lbs.

XHDP Roller Kelly Bushing

HDP Roller Kelly BushingWidely recognized as the standard of the industry. For master bushings with 25 pin circle 27 HDP or 23 pin circle 20 HDP. Unit comes with wrench, wiper and wear gauge. Weight 1500 lbs.

27 HDP Roller Kelly Bushing

MDP Roller Kelly BushingAll the advantages of the HDP is for medium or smaller rigs with 17 or 20 rotary tables. Unit comes with wrench, wiper and wear gauge. For Master Bushings with 23" pin circle 20 MDP or 19" pin circle 17 MDP. Weight

750 lbs. Roller Kelly Bushing

HDS Roller Kelly BushingFor heavy duty square drive applications. Components are interchangeable with HDP. Unit comes with wrench, wiper and wear gauge. Weight 1420 lbs.

HDS Roller Kelly Bushing

MDS Roller Kelly BushingFor medium duty square drive applications. Component parts are interchangeable with MDP. Unit comes with wrench, wiper and wear gauge. Weight 800 lbs.

Optional Lock AssemblyLocks for the Kelly Bushing in the Master Bushing for use offshore with motion compensators. Lock assembly may be ordered installed in 27-HDP only. To specify, add an L t

239813017 catalogo varco bj

Documents