power sections - national oilwell varco · power sections
TRANSCRIPT
www.nov.com/PowerSections
Power Sections
http://www.nov.com/Segments/Wellbore_Technologies/Downhole/Power_Section/Power_Sections.aspx
Drilling and Intervention
NOV Power Sections CatalogTABLE OF CONTENTS
REV. 00
PAGE NO: 2
TABLE OF CONTENTSIntroduction ................................................................................................................................................................................... Page 3
Global Facility Footprint ................................................................................................................................................................ Page 4
Elastomer Overview ....................................................................................................................................................................... Page 5
Fit Overview ................................................................................................................................................................................... Page 7
How to Read Spec sheets ............................................................................................................................................................... Page 8
Conventional cover ...................................................................................................................................................................... Page 14
Spec Sheets - Conventional (Imperial) ........................................................................................................................................ Page 15
ERT - Cover.................................................................................................................................................................................. Page 213
ERT Operational Guidelines ..................................................................................................................................................... Page 214
- Introduction ..................................................................................................................................................................... Page 214
- ERT Fit Recommendations .............................................................................................................................................. Page 214
- Relationship between ERT Operational Loading and Stator Durability ........................................................................ Page 216
-AdjustingERTDifferentialPressureforOperationalTemperature ................................................................................ Page 217
- How to Translate Loading Factors to Pressures and Flows ............................................................................................ Page 218
ERT Operational Temperature Range By OD Size ..................................................................................................................... Page 220
Spec Sheets – ERT (Imperial) ..................................................................................................................................................... Page 238
Spec Sheets – ERT (Metric) ......................................................................................................................................................... Page 256
Drilling and Intervention
NOV Power Sections CatalogINTRODUCTION
REV. 00
PAGE NO: 3
INTRODUCTION
NOV is the world’s largest supplier of power sections, and we have the most diverse portfolio of power section products in the industry. We offer all speed ranges for 1-11/16” to 11¼” diameter powers sections and we have manufacturing and reline facilities around the globe to quickly provide the tools you need, when and where you need them.
Our power section products are available for sale from our manufacturing facilities, or for rental from an NOV service facility. The offering of products at the facilities near you is always evolving, and we can assist you with any questions about any new items that are available. Please contact your NOV account representative for more details.
Number 4 Gul WayJurong, Singapore 62919265-6303-9601New and Reline Stators RR, PRR, POB
8018 Breen DriveHouston, Texas 77064USA281-854-1000New & Reline Stators RR, PRR, POB New Rotors
10586 Highway 75 NorthWillis, Texas 77378USA936-890-1064New & Reline Stators UF100D, UF114, UF180, 280XT, POBNew Rotors
(Future Reline facility)610 15th AvenueNisku, Alberta T9E 8A3Canada780-955-7311 New & Reline Stators RR, UF114, PRR, POB
Zone Industrial De Petit RechainAvenue Mercury 3Chaineux, B-4650Belgium32-87-313875New and Reline Stators UF100D, UF114, UF180, 280XT, POBNew Rotors
ICAD 2 Plots 6AR17 & 7AR17Mussafah Industrial AreaAbu Dhabi, UAE+971 (0) 2-657-5612New and Reline StatorsRR, PRR, POB
GLOBAL FACILITY FOOTPRINT
Drilling and Intervention
NOV Power Sections CatalogELASTOMER OPTIONS
REV. 00
PAGE NO: 5
ELASTOMER OVERVIEW
Standard NBR Elastomers | RR, UF100DStandard NBR elastomers provide basic fluid compatibility and torque capabilities at efficient prices. These elastomers are generally recommended for applications below 300°F, but have been successful in applications above 350°F.
RR : Available from Houston, Abu Dhabi, and Singapore
UF100D : Available from Houston and Belgium
Standard HNBR Elastomers | UF180 Standard HNBR elastomers are generally recommended for use with the most aggressive drilling fluids at higher temperatures, and have similar torque and power potential as standard NBR elastomers. These elastomers have been successful in applications with temperatures above 350°F in the most chemically reactive drilling fluids.
UF180 : Available from Houston and Belgium
Approximate Relative Performance
Fluid Compatibility BestStandard
Torq
ue P
oten
tial
1
1.25
1.5
1.75
2Highest
NBR Elastomer HNBR Elastomer ERT
UF100D, RR
UF114
UF180
PRR280XT
POB
ERT w/ POB
ERT w/ UF114
Drilling and Intervention
NOV Power Sections CatalogELASTOMER OPTIONS
REV. 00
PAGE NO: 6
Performance Elastomers | PRR and UF114 Performance elastomers offer improved fluid compatibility and mechanical properties over NBR elastomers for use in a wider range of drilling applications and providing increased torque potential.
PRR (PowerPLUS™ RR elastomer) - 50% additional torque and power potential above standard NBR elastomers with minimal fluid compatibility improvement - Available from Houston, Abu Dhabi, and SingaporeUF114 - 25% additional torque and power potential above standard NBR elastomers with significant fluid compatibility improvement - Available from Houston and Belgium
Premium Elastomers | POB, 280XTPremium elastomers combine excellent fluid compatibility and the highest torque potential to maximize your drilling rates and improve your reliability.
POB (PowerPLUS™ OBM elastomer) - 50% additional torque and power potential above standard NBR elastomers - Available from Houston, Abu Dhabi, and Singapore280XT - 65% additional torque and power potential above standard NBR elastomers - Available from Houston
ERT and ERTcr Stators Lined with Premium or Performance Elastomers
ERT and ERTcr stators feature a uniform elastomer thickness with contoured steel lobes to provide the highest torque potential. These stators are available with any of our premium or performance elastomers.
ERTcr stators allow you to match a stator to an existing rotor configuration. By matching the ERTcr to a rotor that’s already in your fleet, you gain the benefits of our highest performing product without the need to purchase additional components.
Rotor Coatings Rotors are commonly coated with chrome or tungsten carbide.
Chrome – electroplating of a thin, non-uniform layer across the lobes - Low-cost coating - Polished to remove any surface features - Abrasion tolerant
Tungsten Carbide – high-temperature spray application that results in uniform thickness across the lobes - Impervious to mud effects - Longer service between coatings - Abrasion tolerant
NOTE: Rotor profiles are machined specifically for their intended coatings. Changing the coating also changes the intended rotor profile, which may reduce the overall power section performance.
Drilling and Intervention
NOV Power Sections CatalogFIT OVERVIEW
REV. 00
PAGE NO: 7
FIT OVERVIEW
When evaluating fit, the main Relevant Environmental factors to consider are:• Run Temperature• Operational fit• Fluid compatibility• Wear during run
The goal is to understand the “compression percentage”.
Interference fit between a power section rotor and stator is calculated as:
FITin = ROTavg - STAm
Where : FITin is measured in thousandths of an inch; ROTavg is the major OD of the rotor minus 2 times the eccentricity for even lobe count rotors, or valley-to-crest for odd lobe count rotors, to thousandths of an inch; and STAm is the vector measurement taken in the shop in inches to thousandths of an inch.
Next, FIT% is used to normalize the target compression across stator sizes and elastomers. FIT% is calculated:
FITin FIT% = Trubber
Where : Truvbber is the stator minor ID minus the nominal tube ID, all measured to thousandths of an inch.
The expanded equation is:
RTOavg - STA m FIT% = STA m - TUBE id
The most basic version of fit analysis only takes into account temperature. For more complex applications swell due to fluids and elastomer wear must be taken into consideration. Target FIT% by elastomer are included in the chart below.
Recommended Operational Fits (%)
Elastomer Low Power, Shorter Life Optimal High Power, Shorter Life
RR
0.5-1.0 1.0 – 2.0 2.0 – 2.5UF100DUF180UF114
PRR0.0 – 0.5 0.5 – 1.5 1.5 – 2.0POB
280XT
280XT wears differently than other elastomers. Please contact NOV engineering support for assistance with 280XT fits.Please see ERT fit recommendations on page 214 for additional information on fitting ERT power sections.
Drilling and Intervention
NOV Power Sections CatalogHOW TO READ SPEC SHEETS
REV. 00
PAGE NO: 8
HOW TO READ SPEC SHEETS
Purpose Spec Sheets can be used to:
• Quickly answer technical questions from the customer,• Determine the actual (not nominal) operational interference fit to optimize Power Section performance,• Assist customer and/or operator on how to best run the power section, and• Identify temperature gaps in our product offerings that need to be filled to generate future sales opportunities.
Scope This document will cover the guidelines for interpretation of the technical information charts and graphs included in the spec sheets for the conventional configurations
Spec Sheet Layout
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
242.6 Min 230.6 Alternate Stator OD: 5 in.2.561 -0.059-0.059 2.580 -0.078
-0.049 2.554 -0.051 2.544 -0.0422.558 -0.055 2.543
Reline Lengths (in.) Breen: Max 242.6 Min 230.6 Willis: Max2.5622.576 -0.0748 3-OS
-0.041 2.5512.525 -0.023
7 2-OS 2.5-OS 2.556 -0.0542.530 -0.027 2.539 -0.0372.541 -0.0396 2-OS
52.5152.526 -0.0234 OS 1.5-OS 2.525 -0.023 2.514 -0.011-0.013 2.523 -0.021 2.519 -0.017
32.4962.506 -0.0032 OS 2.493 0.0100.006 2.500 0.002
1
2.473 0.030 2.464 0.0390 S 2.506 -0.003
2.476 0.027 2.469 0.0342.502 0.001
T SWillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 6,589 ft-lbs 7,906 ft-lbs 8,697 3,012 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 5,270 ft-lbs
Head Length 7.25 Side 2: 11.0 Max Torque 3,294 ft-lbsWeight 323 Weight 501 Stall ∆ Pressure 1,825 psi 2,282 psi
ft-lbs 4,118 ft-lbs 4,942 ft-lbs 5,436 2,738 psi
280XTHead Diameter 3.125 Side 1: 8.0 Max ∆ Pressure 1,141 psi 1,426 psiMajor Diameter 2.916 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,712 psi 1,883 psi
RPMEccentricity 0.207 Tube ID 3.750 No Load Pressure Loss 95 psiContour Length 222.2 Contour Length 223.6 Speed Range 95-262
475-56834.75" 5:6 Lobes 8.3 Stages
Rotor Specifications Stator Specifications Performance SpecificationsGPM
Avg. Diameter 2.503 Tube OD 4.75 Rev per Unit Volume 0.95 Rev/GalOverall Length 229.4 Overall Length 242.6 Flow Range 100-275
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
0 500 1,000 1,500 2,000 2,500
Torq
ue (f
t-lbs
)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0 50 100 150 200 250
Fit
Incr
ease
(in)
Fit Increase
Change in Temperature (degF)
275 GPM
185 GPM
100 GPM
0
50
100
150
200
250
300
0 500 1,000 1,500 2,000 2,500
Spee
d (r
pm)
Speed
Differential Pressure (psi)
275 GPM
185 GPM
100 GPM
0
50
100
150
200
250
300
0 500 1,000 1,500 2,000 2,500
Mec
hani
cal P
ower
(hp)
Mechanical Power
Differential Pressure (psi)
Drilling and Intervention
NOV Power Sections CatalogHOW TO READ SPEC SHEETS
REV. 00
PAGE NO: 9
Rotor Specifications
The Rotor Specifications include the following:
• Overall length
• Avg. Diameter
• Contour Length
• Eccentricity
• Major Diameter
• Head Diameter
• Head Length
• Weight
• Thread Form
Stator Specifications
The Stator Specifications include the following:
• Overall Length
• Tube OD
• Contour Length
• Tube ID
• Rubber Cutback Length (Side1 and Side 2)
• Weight
• Tube Material
in.in.in.in.in.in.in.lbs
Thread Form 2 3/8" HEF
Head Length 7.25Weight 323
Head Diameter 3.125Major Diameter 2.916Eccentricity 0.207Contour Length 222.2
Rotor Specifications
Avg. Diameter 2.503Overall Length 229.4
in.in.in.in.
in.in.lbs
Stator Specifications
Tube OD 4.75Overall Length 242.6
Tube ID 3.750Contour Length 223.6
Side 1: 8.0Rubber Cut-back
Side 2: 11.0Weight 501Material Alloy Steel
Drilling and Intervention
NOV Power Sections CatalogHOW TO READ SPEC SHEETS
REV. 00
PAGE NO: 10
Performance Specifications
The Stator performance specifications include the following:
• Configuration Flow Range
• Rev per Unit Volume
• Speed Range
• No Load Pressure Loss
• For the following compounds - RR-UF100D-UF180 - UF114 - POB-PRR - 280XT - Max ∆ Pressure - Max Torque - Stall ∆ Pressure - Stall Torque
Fit Detail Interperation Guidelines
The table will show the available FIT information by Rubber and Location
FIT = ROT AVERAGE DIAMETER (see Rotor Specifications) - Minor Diameter (Sizes T through 8)
ft-lbs 6,589 ft-lbs 7,906 ft-lbs 8,697 3,012 psi
Stall Torque 5,270 ft-lbs
Max Torque 3,294 ft-lbsStall ∆ Pressure 1,825 psi 2,282 psi
ft-lbs 4,118 ft-lbs 4,942 ft-lbs 5,436 2,738 psi
280XTMax ∆ Pressure 1,141 psi 1,426 psi
RR-UF100D-UF180 UF114 POB-PRR1,712 psi 1,883 psi
RPMNo Load Pressure Loss 95 psiSpeed Range 95-262
Performance SpecificationsGPM
Rev per Unit Volume 0.95 Rev/GalFlow Range 100-275
242.6 Min 230.6 Alternate Stator OD: 5 in.2.561 -0.059-0.059 2.580 -0.078
-0.049 2.554 -0.051 2.544 -0.0422.558 -0.055 2.543
Reline Lengths (in.) Breen: Max 242.6 Min 230.6 Willis: Max2.5622.576 -0.0748 3-OS
-0.041 2.5512.525 -0.023
7 2-OS 2.5-OS 2.556 -0.0542.530 -0.027 2.539 -0.0372.541 -0.0396 2-OS
52.5152.526 -0.0234 OS 1.5-OS 2.525 -0.023 2.514 -0.011-0.013 2.523 -0.021 2.519 -0.017
32.4962.506 -0.0032 OS 2.493 0.0100.006 2.500 0.002
1
2.473 0.030 2.464 0.0390 S 2.506 -0.003
2.476 0.027 2.469 0.0342.502 0.001
T SWillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Drilling and Intervention
NOV Power Sections CatalogHOW TO READ SPEC SHEETS
REV. 00
PAGE NO: 11
To find the Fit for the POB rubber using the 7 sizes (2OS for Breen and 2.5OS from Willis) Rotor Ave Dia = 2.503”Stator Minor available from Breen = 2.551”
FIT = Rotor Ave Dia – Minor = 2.503” – 2.551” = -0.049” (Loose)
Stator Minor available from Willis = 2.554”FIT = Rotor Ave Dia – Minor = 2.503” – 2.554” = -0.051” (Loose)
Chart Interperation Detail A. Torque Charts
Each line color represents the maximum differential pressure and the corresponding Torque values. To Read Torque: Select a differential pressure on the x-axis and move vertically to the torque line (as long as it is equal or less than the Max rec. ∆P for the corresponding Rubber). Then move horizontally to the secondary y-axis on the right of the graph and read the torque output.
In this the chart above we selected a 1000psi ∆P, the corresponding Torque value for all the rubber compounds is 2,900ft.lbs
B. Fit Change Due To Change In Temperature
The chart above will reflect the adjustment needed to correct the operational fit due to change in temperatures above 70°F. In this case the fit was for 220°F Operational Fit.
Drilling and Intervention
NOV Power Sections CatalogHOW TO READ SPEC SHEETS
REV. 00
PAGE NO: 12
The change in Temp = ∆T = 220°F - 70°F = 150°F
To read the Fit Increase: Select the ∆T on the x- axis and move vertically to the corresponding rubber line (POB in this case – the dotted Blue and Red Line). Then move horizontally to the Y –and read the Fit increase value (0.031”).
From the previous example in section 7 the POB fit will be corrected as follows.From the table above the Breen POB FIT for size 7 was -0.049” (Loose)
The corrected FIT = -0.049” + 0.031” = -0.018”
So size 7 from Breen with POB will have a corrected fit of -0.018”
To get the Willis corrected valuesFrom the table above the Willis POB FIT for size 7 (2.5OS) was -0.051” (Loose)
The corrected FIT = -0.051” + 0.031” = -0.020” (Loose)
So size 7 (2.5OS) from Willis with POB will have a corrected fit of -0.020”
C. Performance Curves
To Read Speed (RPM): Select the differential pressure on the x-axis and move vertically to the speed line corresponding to the flow rate being used. Then move horizontally to the primary y-axis on the left and read the rotor’s speed at that pressure and flow.
In this case at 1500psi ∆P, the corresponding RPM for POB at 275GPM equals 245 rpm
-0.049 2.554 -0.051 2.544 -0.0422.558 -0.055 2.543 -0.041 2.5517 2-OS 2.5-OS 2.556 -0.054WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
Drilling and Intervention
NOV Power Sections CatalogHOW TO READ SPEC SHEETS
REV. 00
PAGE NO: 13
D. Horse Power Chart
To determine the Horse Power: Selected ∆P on the x- axis and move vertically to the corresponding rubber Type /GPM. Then move horizontally to the Y –axis and read the horse power value. In this case at 1000psi ∆P, the corresponding power for POB at GPM3 equals 135HP.
Conventional Power Sections
www.nov.com/PowerSections
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 15
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
- Min - Alternate Stator OD: 5 in.Reline Lengths (in.) Breen: Max 255 Min 241 Willis: Max87
2.333 -0.0766 2-OS 2.333 -0.07654 OS 2.290 -0.033 2.293 -0.03632 S 2.292 -0.035 2.289 -0.03210T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 2,732 ft-lbs - - psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 1,820 ft-lbs
Head Length 6.00 Side 2: 8.0 Max Torque 1,138 ft-lbsWeight 174 Weight 555 Stall Pressure 1,540 psi - psi
ft-lbs - ft-lbs 1,708 ft-lbs - 2,311 psi
280XTHead Diameter 2.750 Side 1: 8.0 Max Pressure 963 psi - psiMajor Diameter 2.738 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,445 psi - psi
RPMEccentricity 0.241 Tube ID 3.750 No Load Pressure Loss 103 psiContour Length 237.0 Contour Length 239.0 Speed Range 248-646
475-23804.75" 2:3 Lobes 8 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 2.257 Tube OD 4.75 Rev per Unit Volume 2.49 Rev/GalOverall Length 243.0 Overall Length 255.0 Flow Range 100-260
0
500
1,000
1,500
2,000
2,500
0 200 400 600 800 1,000 1,200 1,400 1,600 1,800
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
260 GPM
180 GPM
100 GPM
0
100
200
300
400
500
600
700
0 500 1,000 1,500 2,000
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
260 GPM
180 GPM
100 GPM
0
50
100
150
200
250
0 200 400 600 800 1,000 1,200 1,400 1,600 1,800
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
475-23804.75” 2:3 Lobes 8 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 16
in. in.
in. in.
in. in.
in. in.
in.
in. in.
in. in.
lbs lbs
12/17/2014
Power Section Specification (Imperial Units)
- Min - Alternate Stator OD: 5 in.Reline Lengths (in.) Breen: Max 40 Min 38 Willis: Max
8
7
6
5
4 OS 2.453 -0.033 2.45 -0.030
3
2
1
0 S
Breen Fit
2.427 -0.007
T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Willis FitFit Breen Fit Willis Fit
Fit Details (in.)
Nomenclature UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 515 ft-lbs -- psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 341 ft-lbs
Head Length 6.24 Side 2: 4.3 Max Torque 215 ft-lbsWeight 56 Weight 84 Stall Pressure 124 psi - psi
ft-lbs - ft-lbs 322 ft-lbs - 187 psi
280XTHead Diameter 2.750 Side 1: 4.3 Max Pressure 78 psi - psiMajor Diameter 2.912 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
117 psi - psi
RPM
Eccentricity 0.246 Tube ID 3.8 No Load Pressure Loss 86 psi
Contour Length 33.4 Contour Length 32.5 Speed Range 102-281
475-45114.75" 4:5 Lobes 1.1 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPM
Avg. Diameter 2.420 Tube OD 4.75 Rev per Unit Volume 1.02 Rev/Gal
Overall Length 39.6 Overall Length 41.0 Flow Range 100-275
0
50
100
150
200
250
300
350
400
450
0 20 40 60 80 100 120 140 160
Torque (ft-lbs) versus Differential Pressure
DIFFERENTIAL PRESSURE (psi)
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0.140
0.160
0.180
0 50 100 150 200 250
Fit Increase (in.) versus Change in Temperature
Change in Temperature (degF)
275 GPM
185 GPM
100 GPM
0
50
100
150
200
250
300
0 20 40 60 80 100 120 140 160
RPM (Rev/Min) versus Differential Pressure
DIFFERENTIAL PRESSURE (psi)
275 GPM
185 GPM
100 GPM
0
2
4
6
8
10
12
14
16
18
0 20 40 60 80 100 120 140 160
Mechanical Horsepower (HP) versus Differential Pressure
DIFFERENTIAL PRESSURE (psi)
RR
2.426 -0.006
at 70o F
475-45114.75” 4:5 Lobes 1.1 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 17
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
122 Min 104 Alternate Stator OD: 5 in.
-0.050 2.481 -0.061 2.476 -0.0562.491 -0.071 2.482
Reline Lengths (in.) Breen: Max 122 Min 108 Willis: Max8
-0.062 2.4707 2-OS 3-OS 2.470 -0.050654321
2.4172.432 -0.0122.399 0.021 2.386 0.034
0 S OS 2.425 -0.0052.404 0.016 2.390 0.030
2.415 0.0050.003 2.427 -0.007 2.425 -0.005T S
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 2,212 ft-lbs 2,654 ft-lbs 2,917 1,063 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 1,767 ft-lbs
Head Length 6.00 Side 2: 8.0 Max Torque 1,106 ft-lbsWeight 147 Weight 238 Stall Pressure 644 psi 806 psi
ft-lbs 1,382 ft-lbs 1,659 ft-lbs 1,825 967 psi
280XTHead Diameter 2.750 Side 1: 8.0 Max Pressure 403 psi 504 psiMajor Diameter 2.912 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
605 psi 665 psi
RPMEccentricity 0.246 Tube ID 3.750 No Load Pressure Loss 104 psiContour Length 101.0 Contour Length 100.0 Speed Range 102-282
475-45354.75" 4:5 Lobes 3.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 2.420 Tube OD 4.75 Rev per Unit Volume 1.03 Rev/GalOverall Length 107.0 Overall Length 116.0 Flow Range 100-275
0
500
1,000
1,500
2,000
2,500
0 100 200 300 400 500 600 700 800
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
275 GPM
185 GPM
100 GPM
0
50
100
150
200
250
300
0 200 400 600 800 1,000
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
275 GPM
185 GPM
100 GPM
0
10
20
30
40
50
60
70
80
90
100
0 100 200 300 400 500 600 700 800 900
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
475-45354.75” 4:5 Lobes 3.5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 18
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
187 Min 175 Alternate Stator OD: 5 in.
-0.045 2.452 -0.032 2.445 -0.0252.459 -0.039 2.450
Reline Lengths (in.) Breen: Max 187 Min 173 Willis: Max8
-0.030 2.4657 2-OS 2-OS 2.467 -0.047654 OS 2.443 -0.023 2.443 -0.023321
2.4172.427 -0.0072.399 0.021 2.384 0.036
0 S OS 2.436 -0.0162.403 0.017 2.391 0.029
2.411 0.0090.003 2.433 -0.013 2.425 -0.005T S
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 4,274 ft-lbs 5,129 ft-lbs 5,641 2,059 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 3,419 ft-lbs
Head Length 6.00 Side 2: 8.0 Max Torque 2,137 ft-lbsWeight 245 Weight 385 Stall Pressure 1,248 psi 1,560 psi
ft-lbs 2,671 ft-lbs 3,205 ft-lbs 3,526 1,872 psi
280XTHead Diameter 2.750 Side 1: 8.0 Max Pressure 780 psi 975 psiMajor Diameter 2.912 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,170 psi 1,287 psi
RPMEccentricity 0.246 Tube ID 3.750 No Load Pressure Loss 87 psiContour Length 173.0 Contour Length 171.0 Speed Range 102-282
475-45604.75" 4:5 Lobes 6 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 2.420 Tube OD 4.75 Rev per Unit Volume 1.03 Rev/GalOverall Length 179.0 Overall Length 187.0 Flow Range 100-275
0
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
0 200 400 600 800 1,000 1,200 1,400 1,600
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
275 GPM
185 GPM
100 GPM
0
50
100
150
200
250
300
0 200 400 600 800 1,000 1,200 1,400 1,600
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
275 GPM
185 GPM
100 GPM
0
20
40
60
80
100
120
140
160
180
200
0 200 400 600 800 1,000 1,200 1,400 1,600
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
475-45604.75” 4:5 Lobes 6 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 19
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
207.6 Min 195.6 Alternate Stator OD: 5 in.
-0.040 2.480 -0.060 2.476 -0.0562.492 -0.072 2.478
Reline Lengths (in.) Breen: Max 207 Min 193 Willis: Max8
-0.058 2.4607 2-OS 3-OS 2.466 -0.04665
2.4452.457 -0.0374 OS 2-OS 2.450 -0.030 2.437 -0.017-0.025 2.447 -0.027 2.448 -0.028321
2.4162.425 -0.0052.392 0.028 2.379 0.041
0 S OS 2.432 -0.0122.394 0.026 2.381 0.039
2.410 0.0100.004 2.429 -0.009 2.416 0.004T S
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 4,497 ft-lbs 5,397 ft-lbs 5,936 2,178 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 3,598 ft-lbs
Head Length 6.00 Side 2: 16.6 Max Torque 2,248 ft-lbsWeight 258 Weight 425 Stall Pressure 1,320 psi 1,650 psi
ft-lbs 2,811 ft-lbs 3,373 ft-lbs 3,710 1,980 psi
280XTHead Diameter 2.750 Side 1: 11.0 Max Pressure 825 psi 1,031 psiMajor Diameter 2.912 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,238 psi 1,361 psi
RPMEccentricity 0.246 Tube ID 3.750 No Load Pressure Loss 87 psiContour Length 182.0 Contour Length 180.0 Speed Range 103-284
475-45634.75" 4:5 Lobes 6.3 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 2.420 Tube OD 4.75 Rev per Unit Volume 1.03 Rev/GalOverall Length 188.0 Overall Length 207.6 Flow Range 100-275
0
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
4,500
0 200 400 600 800 1,000 1,200 1,400 1,600
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
275 GPM
185 GPM
100 GPM
0
50
100
150
200
250
300
0 500 1,000 1,500 2,000
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
275 GPM
185 GPM
100 GPM
0
50
100
150
200
250
0 200 400 600 800 1,000 1,200 1,400 1,600 1,800
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
475-45634.75” 4:5 Lobes 6.3 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 20
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
91.6 Min 79.6 Alternate Stator OD: 5 in.Reline Lengths (in.) Breen: Max - Min - Willis: Max87654321
2.5842.602 0.0100 S 2.579 0.0330.028 2.590 0.022T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 1,565 ft-lbs 1,879 ft-lbs 2,065 910 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 1,252 ft-lbs
Head Length 6.00 Side 2: 8.0 Max Torque 782 ft-lbsWeight 105 Weight 190 Stall Pressure 552 psi 690 psi
ft-lbs 978 ft-lbs 1,174 ft-lbs 1,291 828 psi
280XTHead Diameter 2.750 Side 1: 8.0 Max Pressure 345 psi 431 psiMajor Diameter 3.004 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
518 psi 569 psi
RPMEccentricity 0.196 Tube ID 3.750 No Load Pressure Loss 107 psiContour Length 78.5 Contour Length 75.6 Speed Range 121-334
475-56304.75" 5:6 Lobes 3 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 2.612 Tube OD 4.75 Rev per Unit Volume 1.22 Rev/GalOverall Length 84.5 Overall Length 91.6 Flow Range 100-275
0
200
400
600
800
1,000
1,200
1,400
1,600
0 100 200 300 400 500 600 700
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
275 GPM
185 GPM
100 GPM
0
50
100
150
200
250
300
350
400
0 100 200 300 400 500 600 700
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
275 GPM
185 GPM
100 GPM
0
10
20
30
40
50
60
70
80
90
0 100 200 300 400 500 600 700
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
475-56304.75” 5:6 Lobes 3 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 21
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
- Min - Alternate Stator OD: 5 in.Reline Lengths (in.) Breen: Max 122 Min 110 Willis: Max876543210 S 2.511 -0.007 2.511 -0.007T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 2,315 ft-lbs - - psi
Thread Form 62C0001 Material Alloy Steel Stall Torque 1,543 ft-lbs
Head Length 6.00 Side 2: 8.0 Max Torque 965 ft-lbsWeight 116 Weight 258 Stall Pressure 969 psi - psi
ft-lbs - ft-lbs 1,447 ft-lbs - 1,454 psi
280XTHead Diameter 2.750 Side 1: 8.0 Max Pressure 606 psi - psiMajor Diameter 2.828 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
909 psi - psi
RPMEccentricity 0.162 Tube ID 3.750 No Load Pressure Loss 110 psiContour Length 101.0 Contour Length 106.0 Speed Range 173-346
475-56454.75" 5:6 Lobes 4.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 2.504 Tube OD 4.75 Rev per Unit Volume 1.73 Rev/GalOverall Length 107.0 Overall Length 122.0 Flow Range 100-200
0
200
400
600
800
1,000
1,200
1,400
1,600
1,800
0 200 400 600 800 1,000 1,200
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
200 GPM
150 GPM
100 GPM
0
50
100
150
200
250
300
350
400
0 200 400 600 800 1,000 1,200
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
200 GPM
150 GPM
100 GPM
0
10
20
30
40
50
60
70
80
90
100
0 200 400 600 800 1,000 1,200
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
475-56454.75” 5:6 Lobes 4.5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 22
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
- Min - Alternate Stator OD: 5 in.
-0.045
Reline Lengths (in.) Breen: Max 187 Min 175 Willis: Max8
2.5777 2-OS 2.577 -0.0456543210T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 6,261 ft-lbs - - psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 4,175 ft-lbs
Head Length 6.00 Side 2: 8.0 Max Torque 2,610 ft-lbsWeight 260 Weight 385 Stall Pressure 1,211 psi - psi
ft-lbs - ft-lbs 3,915 ft-lbs - 1,816 psi
280XTHead Diameter 2.750 Side 1: 8.0 Max Pressure 757 psi - psiMajor Diameter 2.954 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,136 psi - psi
RPMEccentricity 0.211 Tube ID 3.750 No Load Pressure Loss 89 psiContour Length 172.0 Contour Length 171.0 Speed Range 79-199
475-56604.75" 5:6 Lobes 6 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 2.532 Tube OD 4.75 Rev per Unit Volume 0.80 Rev/GalOverall Length 178.0 Overall Length 187.0 Flow Range 100-250
0
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
4,500
5,000
0 200 400 600 800 1,000 1,200 1,400 1,600
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
250 GPM
175 GPM
100 GPM
0
50
100
150
200
250
0 200 400 600 800 1,000 1,200 1,400 1,600
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
250 GPM
175 GPM
100 GPM
0
20
40
60
80
100
120
140
160
0 200 400 600 800 1,000 1,200 1,400 1,600
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
475-56604.75” 5:6 Lobes 6 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 23
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
242.6 Min 230.6 Alternate Stator OD: 5 in.2.561 -0.059-0.059 2.580 -0.078
-0.049 2.554 -0.051 2.544 -0.0422.558 -0.055 2.543
Reline Lengths (in.) Breen: Max 242.6 Min 230.6 Willis: Max2.5622.576 -0.0748 3-OS
-0.041 2.5512.525 -0.023
7 2-OS 2.5-OS 2.556 -0.0542.530 -0.027 2.539 -0.0372.541 -0.0396 2-OS
52.5152.526 -0.0234 OS 1.5-OS 2.525 -0.023 2.514 -0.011-0.013 2.523 -0.021 2.519 -0.017
32.4962.506 -0.0032 OS 2.493 0.0100.006 2.500 0.002
1
2.473 0.030 2.464 0.0390 S 2.506 -0.003
2.476 0.027 2.469 0.0342.502 0.001
T SWillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 6,589 ft-lbs 7,906 ft-lbs 8,697 3,012 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 5,270 ft-lbs
Head Length 7.25 Side 2: 11.0 Max Torque 3,294 ft-lbsWeight 323 Weight 501 Stall Pressure 1,825 psi 2,282 psi
ft-lbs 4,118 ft-lbs 4,942 ft-lbs 5,436 2,738 psi
280XTHead Diameter 3.125 Side 1: 8.0 Max Pressure 1,141 psi 1,426 psiMajor Diameter 2.916 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,712 psi 1,883 psi
RPMEccentricity 0.207 Tube ID 3.750 No Load Pressure Loss 95 psiContour Length 222.2 Contour Length 223.6 Speed Range 95-262
475-56834.75" 5:6 Lobes 8.3 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 2.503 Tube OD 4.75 Rev per Unit Volume 0.95 Rev/GalOverall Length 229.4 Overall Length 242.6 Flow Range 100-275
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
0 500 1,000 1,500 2,000 2,500
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
275 GPM
185 GPM
100 GPM
0
50
100
150
200
250
300
0 500 1,000 1,500 2,000 2,500
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
275 GPM
185 GPM
100 GPM
0
50
100
150
200
250
300
0 500 1,000 1,500 2,000 2,500
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
475-56834.75” 5:6 Lobes 8.3 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 24
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
Min Alternate Stator OD: 5 in.Reline Lengths (in.) Breen: Max 180 Min 166 Willis: Max876543210 S 2.500 -0.027 2.496 -0.023T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 4,471 ft-lbs - - psi
Thread Form 62C0001 Material Alloy Steel Stall Torque 2,983 ft-lbs
Head Length 6.00 Side 2: 8.0 Max Torque 1,866 ft-lbsWeight 234 Weight 375 Stall Pressure 339 psi - psi
ft-lbs - ft-lbs 2,799 ft-lbs - 508 psi
280XTHead Diameter 2.825 Side 1: 8.0 Max Pressure 212 psi - psiMajor Diameter 2.798 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
318 psi - psi
RPMEccentricity 0.163 Tube ID 3.750 No Load Pressure Loss 115 psiContour Length 166.5 Contour Length 164.0 Speed Range 29-74
475-7820 (A)4.75" 7:8 Lobes 2 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 2.473 Tube OD 4.75 Rev per Unit Volume 0.30 Rev/GalOverall Length 172.5 Overall Length 180.0 Flow Range 100-250
0
500
1,000
1,500
2,000
2,500
3,000
3,500
0 50 100 150 200 250 300 350 400
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
250 GPM
175 GPM
100 GPM
0
10
20
30
40
50
60
70
80
0 50 100 150 200 250 300 350 400
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
250 GPM
175 GPM
100 GPM
0
5
10
15
20
25
30
35
40
45
0 50 100 150 200 250 300 350 400
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
475-7820 (A)4.75” 7:8 Lobes 2 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 25
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
159 Min 147 Alternate Stator OD: 5 in.Reline Lengths (in.) Breen: Max Min Willis: Max87654321
2.6652.674 0.0140 S 2.662 0.0260.023 2.670 0.018T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 3,464 ft-lbs 4,153 ft-lbs 4,566 564 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 2,768 ft-lbs
Head Length 6.00 Side 2: 8.0 Max Torque 1,732 ft-lbsWeight 242 Weight 323 Stall Pressure 342 psi 428 psi
ft-lbs 2,165 ft-lbs 2,598 ft-lbs 2,858 513 psi
280XTHead Diameter 2.750 Side 1: 8.0 Max Pressure 214 psi 268 psiMajor Diameter 3.024 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
321 psi 353 psi
RPMEccentricity 0.168 Tube ID 3.750 No Load Pressure Loss 113 psiContour Length 143.0 Contour Length 142.0 Speed Range 32-89
475-7820 (B)4.75" 7:8 Lobes 2 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 2.688 Tube OD 4.75 Rev per Unit Volume 0.33 Rev/GalOverall Length 149.0 Overall Length 158.0 Flow Range 100-275
0
500
1,000
1,500
2,000
2,500
3,000
3,500
0 50 100 150 200 250 300 350 400
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
275 GPM
185 GPM
100 GPM
0
10
20
30
40
50
60
70
80
90
100
0 100 200 300 400 500
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
275 GPM
185 GPM
100 GPM
0
5
10
15
20
25
30
35
40
45
50
0 50 100 150 200 250 300 350 400 450
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
475-7820 (B)4.75” 7:8 Lobes 2 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 26
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
64.5 Min 52.5 Alternate Stator OD: 5 in.Reline Lengths (in.) Breen: Max Min Willis: Max8765
2.7232.731 -0.0024 OS 2.718 0.0110.006 2.724 0.005321
2.6952.703 0.0260 S 2.688 0.0410.034 2.700 0.029T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 970 ft-lbs 1,164 ft-lbs 1,280 496 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 774 ft-lbs
Head Length 5.00 Side 2: 5.0 Max Torque 485 ft-lbsWeight 85 Weight 129 Stall Pressure 300 psi 376 psi
ft-lbs 606 ft-lbs 728 ft-lbs 800 451 psi
280XTHead Diameter 2.750 Side 1: 13.0 Max Pressure 188 psi 235 psiMajor Diameter 3.067 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
282 psi 310 psi
RPMEccentricity 0.169 Tube ID 3.750 No Load Pressure Loss 140 psiContour Length 46.5 Contour Length 46.5 Speed Range 102-280
475-7820 (C)4.75" 7:8 Lobes 2 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 2.729 Tube OD 4.75 Rev per Unit Volume 1.02 Rev/GalOverall Length 51.5 Overall Length 64.5 Flow Range 100-275
0
100
200
300
400
500
600
700
800
900
0 50 100 150 200 250 300 350
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
275 GPM
185 GPM
100 GPM
0
50
100
150
200
250
300
0 50 100 150 200 250 300 350 400
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
275 GPM
185 GPM
100 GPM
0
5
10
15
20
25
30
35
40
45
0 50 100 150 200 250 300 350 400
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
475-7820 (C)4.75” 7:8 Lobes 2 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 27
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
Min Alternate Stator OD: 5 in.
-0.043
Reline Lengths (in.) Breen: Max 122 Min 108 Willis: Max8
2.6507 2-OS 2.650 -0.0436543210 S 2.611 -0.004 2.606 0.001T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 2,760 ft-lbs - - psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 1,841 ft-lbs
Head Length 6.00 Side 2: 8.0 Max Torque 1,151 ft-lbsWeight 168 Weight 237 Stall Pressure 387 psi - psi
ft-lbs - ft-lbs 1,727 ft-lbs - 580 psi
280XTHead Diameter 2.750 Side 1: 8.0 Max Pressure 242 psi - psiMajor Diameter 2.936 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
363 psi - psi
RPMEccentricity 0.164 Tube ID 3.750 No Load Pressure Loss 122 psiContour Length 101.0 Contour Length 100.0 Speed Range 55-152
475-7822 (A)4.75" 7:8 Lobes 2.2 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 2.607 Tube OD 4.75 Rev per Unit Volume 0.55 Rev/GalOverall Length 107.0 Overall Length 116.0 Flow Range 100-275
0
500
1,000
1,500
2,000
2,500
0 50 100 150 200 250 300 350 400 450
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
275 GPM
185 GPM
100 GPM
0
20
40
60
80
100
120
140
160
0 100 200 300 400 500
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
275 GPM
185 GPM
100 GPM
0
10
20
30
40
50
60
0 50 100 150 200 250 300 350 400 450
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
475-7822 (A)4.75” 7:8 Lobes 2.2 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 28
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
123 Min 105 Alternate Stator OD: 5 in.
2.619 -0.012 2.604 0.0032.622 -0.015 2.606
Reline Lengths (in.) Breen: Max Min Willis: Max8
0.0017 2-OS65
2.5882.598 0.0094 OS 2.588 0.0190.019 2.597 0.010321
2.5672.585 0.0220 S 2.563 0.0440.040 2.581 0.026T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 2,303 ft-lbs 2,760 ft-lbs 3,036 638 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 1,841 ft-lbs
Head Length 6.00 Side 2: 8.0 Max Torque 1,151 ft-lbsWeight 168 Weight 237 Stall Pressure 387 psi 484 psi
ft-lbs 1,439 ft-lbs 1,727 ft-lbs 1,900 580 psi
280XTHead Diameter 2.750 Side 1: 8.0 Max Pressure 242 psi 303 psiMajor Diameter 2.936 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
363 psi 399 psi
RPMEccentricity 0.164 Tube ID 3.750 No Load Pressure Loss 122 psiContour Length 101.0 Contour Length 100.0 Speed Range 55-152
475-7822 (B)4.75" 7:8 Lobes 2.2 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 2.607 Tube OD 4.75 Rev per Unit Volume 0.55 Rev/GalOverall Length 107.0 Overall Length 116.0 Flow Range 100-275
0
500
1,000
1,500
2,000
2,500
0 50 100 150 200 250 300 350 400 450
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
275 GPM
185 GPM
100 GPM
0
20
40
60
80
100
120
140
160
0 100 200 300 400 500
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
275 GPM
185 GPM
100 GPM
0
10
20
30
40
50
60
0 100 200 300 400 500
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
475-7822 (B)4.75” 7:8 Lobes 2.2 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 29
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
237 Min 217 Alternate Stator OD: 5 in.Reline Lengths (in.) Breen: Max Min Willis: Max8765
2.7542.768 -0.0204 OS OS 2.782 -0.034 2.754 -0.006-0.006 2.791 -0.043 2.760 -0.012321
2.7402.753 -0.0050 S S 2.756 -0.008 2.739 0.0090.008 2.750 -0.002 2.750 -0.002T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 6,718 ft-lbs 8,055 ft-lbs 8,864 855 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 5,370 ft-lbs
Head Length 5.70 Side 2: 8.0 Max Torque 3,359 ft-lbsWeight 370 Weight 381 Stall Pressure 518 psi 648 psi
ft-lbs 4,199 ft-lbs 5,038 ft-lbs 5,542 777 psi
280XTHead Diameter 2.750 Side 1: 8.0 Max Pressure 324 psi 405 psiMajor Diameter 3.097 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
486 psi 535 psi
RPMEccentricity 0.175 Tube ID 4.000 No Load Pressure Loss 110 psiContour Length 214.3 Contour Length 213.3 Speed Range 25-76
475-78264.75" 7:8 Lobes 2.6 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 2.748 Tube OD 4.75 Rev per Unit Volume 0.25 Rev/GalOverall Length 220.0 Overall Length 229.3 Flow Range 100-300
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
0 100 200 300 400 500 600 700
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
300 GPM
200 GPM
100 GPM
0
10
20
30
40
50
60
70
80
90
0 100 200 300 400 500 600 700 800
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
300 GPM
200 GPM
100 GPM
0
10
20
30
40
50
60
70
80
90
0 100 200 300 400 500 600 700 800
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
475-78264.75” 7:8 Lobes 2.6 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 30
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
250 Min 238 Alternate Stator OD: 5 in.
-0.040
Reline Lengths (in.) Breen: Max 250.1 Min 238.1 Willis: Max8
2.5137 2-OS 2.516 -0.043654 OS 2.504 -0.031 2.497 -0.024321
2.492 -0.0192.461 0.012
0 S OS 2.486 -0.0132.466 0.007
2.483 -0.010 2.487 -0.014T S
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 7,055 ft-lbs - - psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 4,698 ft-lbs
Head Length 5.50 Side 2: 8.0 Max Torque 2,940 ft-lbsWeight 329 Weight 524 Stall Pressure 556 psi - psi
ft-lbs - ft-lbs 4,410 ft-lbs - 835 psi
280XTHead Diameter 3.000 Side 1: 8.0 Max Pressure 348 psi - psiMajor Diameter 2.798 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
522 psi - psi
RPMEccentricity 0.163 Tube ID 3.750 No Load Pressure Loss 119 psiContour Length 236.5 Contour Length 234.0 Speed Range 31-77
475-78294.75" 7:8 Lobes 2.9 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 2.473 Tube OD 4.75 Rev per Unit Volume 0.31 Rev/GalOverall Length 242.0 Overall Length 250.0 Flow Range 100-250
0
1,000
2,000
3,000
4,000
5,000
6,000
0 100 200 300 400 500 600 700
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
250 GPM
175 GPM
100 GPM
0
10
20
30
40
50
60
70
80
90
0 100 200 300 400 500 600 700
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
250 GPM
175 GPM
100 GPM
0
10
20
30
40
50
60
70
0 100 200 300 400 500 600 700
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
475-78294.75” 7:8 Lobes 2.9 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 31
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
123 Min 110.6 Alternate Stator OD: 5 in.Reline Lengths (in.) Breen: Max Min Willis: Max87654321
2.6642.688 -0.0160 S 2.663 0.0090.008 2.678 -0.006T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 2,979 ft-lbs 3,572 ft-lbs 3,932 982 psi
Thread Form 1 7/8"-4 SA Material Alloy Steel Stall Torque 2,382 ft-lbs
Head Length 6.00 Side 2: 8.5 Max Torque 1,489 ft-lbsWeight 192 Weight 228 Stall Pressure 595 psi 744 psi
ft-lbs 1,862 ft-lbs 2,234 ft-lbs 2,458 892 psi
280XTHead Diameter 2.750 Side 1: 8.5 Max Pressure 372 psi 465 psiMajor Diameter 3.016 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
558 psi 614 psi
RPMEccentricity 0.172 Tube ID 3.875 No Load Pressure Loss 115 psiContour Length 107.0 Contour Length 105.6 Speed Range 65-180
475-78304.75" 7:8 Lobes 3 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 2.672 Tube OD 4.75 Rev per Unit Volume 0.66 Rev/GalOverall Length 113.0 Overall Length 122.6 Flow Range 100-275
0
500
1,000
1,500
2,000
2,500
3,000
0 100 200 300 400 500 600 700
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
275 GPM
185 GPM
100 GPM
0
20
40
60
80
100
120
140
160
180
200
0 100 200 300 400 500 600 700 800
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
275 GPM
185 GPM
100 GPM
0
10
20
30
40
50
60
70
80
90
0 100 200 300 400 500 600 700 800
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
475-78304.75” 7:8 Lobes 3 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 32
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
238 Min 226 Alternate Stator OD: 5 in.Reline Lengths (in.) Breen: Max Min Willis: Max8765
2.6952.699 -0.0114 OS 2.691 -0.003-0.007 2.693 -0.005321
2.6682.676 0.0120 S 2.665 0.0230.020 2.663 0.025T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 6,460 ft-lbs 7,747 ft-lbs 8,524 1,053 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 5,165 ft-lbs
Head Length 6.00 Side 2: 8.0 Max Torque 3,230 ft-lbsWeight 371 Weight 487 Stall Pressure 638 psi 798 psi
ft-lbs 4,037 ft-lbs 4,845 ft-lbs 5,329 957 psi
280XTHead Diameter 2.750 Side 1: 8.0 Max Pressure 399 psi 499 psiMajor Diameter 3.024 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
599 psi 658 psi
RPMEccentricity 0.168 Tube ID 3.750 No Load Pressure Loss 113 psiContour Length 223.0 Contour Length 222.0 Speed Range 32-89
475-78314.75" 7:8 Lobes 3.1 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 2.688 Tube OD 4.75 Rev per Unit Volume 0.33 Rev/GalOverall Length 229.0 Overall Length 238.0 Flow Range 100-275
0
1,000
2,000
3,000
4,000
5,000
6,000
0 100 200 300 400 500 600 700 800
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
275 GPM
185 GPM
100 GPM
0
10
20
30
40
50
60
70
80
90
100
0 200 400 600 800 1,000
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
275 GPM
185 GPM
100 GPM
0
10
20
30
40
50
60
70
80
90
100
0 100 200 300 400 500 600 700 800 900
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
475-78314.75” 7:8 Lobes 3.1 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 33
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
198 Min 175 Alternate Stator OD: 5 in.
-0.043
Reline Lengths (in.) Breen: Max 198 Min 175 Willis: Max8
2.6507 2-OS 2.649 -0.04265
2.6312.640 -0.0334 OS 2-OS 2.638 -0.031 2.631 -0.024-0.024 2.636 -0.029 2.632 -0.025321
2.6072.615 -0.0082.586 0.021 2.569 0.038
0 S OS 2.615 -0.0082.587 0.020 2.577 0.030
2.603 0.0040.000 2.612 -0.005 2.606 0.001T S
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 4,521 ft-lbs 5,423 ft-lbs 5,964 1,256 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 3,614 ft-lbs
Head Length 6.00 Side 2: 8.0 Max Torque 2,260 ft-lbsWeight 275 Weight 385 Stall Pressure 761 psi 952 psi
ft-lbs 2,825 ft-lbs 3,390 ft-lbs 3,729 1,142 psi
280XTHead Diameter 2.750 Side 1: 8.0 Max Pressure 476 psi 595 psiMajor Diameter 2.936 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
714 psi 785 psi
RPMEccentricity 0.164 Tube ID 3.750 No Load Pressure Loss 147 psiContour Length 172.0 Contour Length 171.0 Speed Range 55-152
475-78384.75" 7:8 Lobes 3.8 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 2.607 Tube OD 4.75 Rev per Unit Volume 0.55 Rev/GalOverall Length 178.0 Overall Length 187.0 Flow Range 100-275
0
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
4,500
0 100 200 300 400 500 600 700 800 900
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
275 GPM
185 GPM
100 GPM
0
20
40
60
80
100
120
140
160
180
0 200 400 600 800 1,000
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
275 GPM
185 GPM
100 GPM
0
20
40
60
80
100
120
0 200 400 600 800 1,000
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
475-78384.75” 7:8 Lobes 3.8 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 34
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
200 Min 182 Alternate Stator OD: 5 in.Reline Lengths (in.) Breen: Max Min Willis: Max8765
2.7132.724 -0.0254 OS 2.710 -0.011-0.014 2.719 -0.020321
2.6782.688 0.0110 S 2.677 0.0220.021 2.684 0.015T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 5,954 ft-lbs 7,143 ft-lbs 7,857 1,850 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 4,761 ft-lbs
Head Length 6.00 Side 2: 8.0 Max Torque 2,977 ft-lbsWeight 312 Weight 395 Stall Pressure 1,121 psi 1,402 psi
ft-lbs 3,721 ft-lbs 4,465 ft-lbs 4,912 1,682 psi
280XTHead Diameter 2.750 Side 1: 8.0 Max Pressure 701 psi 876 psiMajor Diameter 3.041 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,052 psi 1,157 psi
RPMEccentricity 0.171 Tube ID 3.750 No Load Pressure Loss 110 psiContour Length 180.0 Contour Length 178.0 Speed Range 62-170
475-7850 (A)4.75" 7:8 Lobes 5 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 2.699 Tube OD 4.75 Rev per Unit Volume 0.62 Rev/GalOverall Length 186.0 Overall Length 194.0 Flow Range 100-275
0
1,000
2,000
3,000
4,000
5,000
6,000
0 200 400 600 800 1,000 1,200 1,400
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
275 GPM
185 GPM
100 GPM
0
20
40
60
80
100
120
140
160
180
0 200 400 600 800 1,000 1,200 1,400 1,600
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
275 GPM
185 GPM
100 GPM
0
20
40
60
80
100
120
140
160
0 200 400 600 800 1,000 1,200 1,400 1,600
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
475-7850 (A)4.75” 7:8 Lobes 5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 35
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
208 Min 196 Alternate Stator OD: 5 in.Reline Lengths (in.) Breen: Max - Min - Willis: Max87654321
2.2182.229 0.0270 S 2.211 0.0460.039 2.234 0.023T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 4,105 ft-lbs 4,925 ft-lbs 5,418 3,793 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 3,284 ft-lbs
Head Length 5.00 Side 2: 6.0 Max Torque 2,052 ft-lbsWeight 235 Weight 433 Stall Pressure 2,299 psi 2,874 psi
ft-lbs 2,566 ft-lbs 3,079 ft-lbs 3,387 3,448 psi
280XTHead Diameter 2.750 Side 1: 6.0 Max Pressure 1,437 psi 1,796 psiMajor Diameter 2.815 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
2,156 psi 2,371 psi
RPMEccentricity 0.279 Tube ID 3.750 No Load Pressure Loss 82 psiContour Length 197.0 Contour Length 196.0 Speed Range 201-554
475-341104.75" 3:4 Lobes 11 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 2.257 Tube OD 4.75 Rev per Unit Volume 2.02 Rev/GalOverall Length 202.0 Overall Length 208.0 Flow Range 100-275
0
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
0 500 1,000 1,500 2,000 2,500 3,000
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
275 GPM
185 GPM
100 GPM
0
100
200
300
400
500
600
0 500 1,000 1,500 2,000 2,500 3,000
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
275 GPM
185 GPM
100 GPM
0
50
100
150
200
250
300
350
400
0 500 1,000 1,500 2,000 2,500 3,000
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
475-341104.75” 3:4 Lobes 11 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 36
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
238 Min 226 Alternate Stator OD: 5 in.
2.308 -0.051 2.289 -0.0332.309 -0.053 2.298
Reline Lengths (in.) Breen: Max Min Willis: Max8
-0.0427 2-OS6543
2.232 0.024 2.211 0.0462
2.230 0.027 2.222 0.0351 S0T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 4,724 ft-lbs 5,668 ft-lbs 6,236 4,889 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 3,779 ft-lbs
Head Length 6.00 Side 2: 8.0 Max Torque 2,362 ft-lbsWeight 266 Weight 495 Stall Pressure 2,963 psi 3,704 psi
ft-lbs 2,952 ft-lbs 3,543 ft-lbs 3,897 4,444 psi
280XTHead Diameter 2.750 Side 1: 8.0 Max Pressure 1,852 psi 2,315 psiMajor Diameter 2.815 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
2,778 psi 3,056 psi
RPMEccentricity 0.279 Tube ID 3.750 No Load Pressure Loss 82 psiContour Length 223.0 Contour Length 222.0 Speed Range 180-620
475-341404.75" 3:4 Lobes 14 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 2.257 Tube OD 4.75 Rev per Unit Volume 2.26 Rev/GalOverall Length 229.0 Overall Length 238.0 Flow Range 80-275
0
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
4,500
0 500 1,000 1,500 2,000 2,500 3,000 3,500
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
275 GPM
185 GPM
80 GPM
0
100
200
300
400
500
600
700
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
275 GPM
185 GPM
80 GPM0
50
100
150
200
250
300
350
400
450
500
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
475-341404.75” 3:4 Lobes 14 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 37
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
159 Min 147 Alternate Stator OD: 5 in.Reline Lengths (in.) Breen: Max Min Willis: Max8765
2.6962.700 -0.0294 OS 2.687 -0.016-0.025 2.701 -0.030321
2.6822.690 -0.0190 S 2.678 -0.007-0.011 2.688 -0.017T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 5,052 ft-lbs 6,060 ft-lbs 6,667 1,494 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 4,039 ft-lbs
Head Length 6.00 Side 2: 8.0 Max Torque 2,526 ft-lbsWeight 236 Weight 327 Stall Pressure 905 psi 1,132 psi
ft-lbs 3,157 ft-lbs 3,789 ft-lbs 4,168 1,358 psi
280XTHead Diameter 2.900 Side 1: 8.0 Max Pressure 566 psi 708 psiMajor Diameter 2.945 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
849 psi 934 psi
RPMEccentricity 0.137 Tube ID 3.750 No Load Pressure Loss 148 psiContour Length 145.1 Contour Length 143.0 Speed Range 56-140
475-910404.75" 9:10 Lobes 4 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 2.671 Tube OD 4.75 Rev per Unit Volume 0.56 Rev/GalOverall Length 151.1 Overall Length 159.0 Flow Range 100-250
0
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
4,500
5,000
0 200 400 600 800 1,000 1,200
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
250 GPM
175 GPM
100 GPM
0
20
40
60
80
100
120
140
160
0 200 400 600 800 1,000 1,200
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
250 GPM
175 GPM
100 GPM
0
20
40
60
80
100
120
0 200 400 600 800 1,000 1,200
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
475-910404.75” 9:10 Lobes 4 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 38
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
- Min - Alternate Stator OD: - in.Reline Lengths (in.) Breen: Max 250 Min 238 Willis: Max876543210 S 2.985 -0.015 2.986 -0.016T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 2,184 ft-lbs - - psi
Thread Form 1 7/8" SA Material Alloy Steel Stall Torque 1,455 ft-lbs
Head Length 6.00 Side 2: 8.0 Max Torque 910 ft-lbsWeight 365 Weight 561 Stall Pressure 1,625 psi - psi
ft-lbs - ft-lbs 1,365 ft-lbs - 2,438 psi
280XTHead Diameter 2.880 Side 1: 8.0 Max Pressure 1,016 psi - psiMajor Diameter 3.226 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,524 psi - psi
RPMEccentricity 0.128 Tube ID 4.000 No Load Pressure Loss 181 psiContour Length 237.0 Contour Length 234.0 Speed Range 492-1148
500-23905" 2:3 Lobes 9 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 2.970 Tube OD 5 Rev per Unit Volume 3.28 Rev/GalOverall Length 243.0 Overall Length 250.0 Flow Range 150-350
0
200
400
600
800
1,000
1,200
1,400
1,600
1,800
0 500 1,000 1,500 2,000
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
350 GPM
250 GPM
150 GPM
0
200
400
600
800
1,000
1,200
1,400
0 500 1,000 1,500 2,000
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
350 GPM
250 GPM
150 GPM
0
50
100
150
200
250
300
350
0 500 1,000 1,500 2,000
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
500-23905” 2:3 Lobes 9 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 39
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
- Min - Alternate Stator OD: 4.75 in.Reline Lengths (in.) Breen: Max 140 Min 133 Willis: Max87
-0.0066
2.4095 OS 2.409 -0.00643210 S 2.397 0.006 2.397 0.006T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 2,649 ft-lbs - - psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 1,766 ft-lbs
Head Length 7.50 Side 2: 8.0 Max Torque 1,104 ft-lbsWeight 177 Weight 340 Stall Pressure 662 psi - psi
ft-lbs - ft-lbs 1,656 ft-lbs - 993 psi
280XTHead Diameter 2.840 Side 1: 8.0 Max Pressure 414 psi - psiMajor Diameter 2.838 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
621 psi - psi
RPMEccentricity 0.218 Tube ID 3.750 No Load Pressure Loss 197 psiContour Length 128.0 Contour Length 124.0 Speed Range 103-258
500-56405" 5:6 Lobes 4 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 2.403 Tube OD 5 Rev per Unit Volume 1.03 Rev/GalOverall Length 135.5 Overall Length 140.0 Flow Range 100-250
0
500
1,000
1,500
2,000
2,500
0 100 200 300 400 500 600 700 800
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
250 GPM
175 GPM
100 GPM
0
50
100
150
200
250
300
0 100 200 300 400 500 600 700 800
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
250 GPM
175 GPM
100 GPM
0
10
20
30
40
50
60
70
80
90
0 100 200 300 400 500 600 700 800
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
500-56405” 5:6 Lobes 4 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 40
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
- Min - Alternate Stator OD: - in.
-0.053
Reline Lengths (in.) Breen: Max 185 Min 171 Willis: Max8
2.7007 2-OS 2.704 -0.057654321
0.0170 S 2.649 -0.002
2.6302.647 0.000
T US 2.630 0.017WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 4,143 ft-lbs - - psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 2,762 ft-lbs
Head Length 6.00 Side 2: 8.0 Max Torque 1,727 ft-lbsWeight 278 Weight 446 Stall Pressure 1,054 psi - psi
ft-lbs - ft-lbs 2,590 ft-lbs - 1,581 psi
280XTHead Diameter 2.750 Side 1: 8.0 Max Pressure 659 psi - psiMajor Diameter 3.029 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
989 psi - psi
RPMEccentricity 0.191 Tube ID 4.000 No Load Pressure Loss 290 psiContour Length 173.5 Contour Length 169.0 Speed Range 205-360
500-67605" 6:7 Lobes 6 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 2.647 Tube OD 5 Rev per Unit Volume 1.03 Rev/GalOverall Length 179.5 Overall Length 185.0 Flow Range 200-350
0
500
1,000
1,500
2,000
2,500
3,000
3,500
0 200 400 600 800 1,000 1,200 1,400
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
350 GPM
275 GPM
200 GPM
0
50
100
150
200
250
300
350
400
0 200 400 600 800 1,000 1,200 1,400
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
350 GPM
275 GPM
200 GPM
0
20
40
60
80
100
120
140
160
180
0 200 400 600 800 1,000 1,200 1,400
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
500-67605” 6:7 Lobes 6 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 41
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
Min Alternate Stator OD: 4.75 in.Reline Lengths (in.) Breen: Max 212 Min 200 Willis: Max87
2.673 -0.0386 OS 2.673 -0.038543210 S 2.651 -0.016 2.646 -0.011T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 7,637 ft-lbs - - psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 5,091 ft-lbs
Head Length 6.00 Side 2: 8.0 Max Torque 3,182 ft-lbsWeight 319 Weight 471 Stall Pressure 1,520 psi - psi
ft-lbs - ft-lbs 4,773 ft-lbs - 2,280 psi
280XTHead Diameter 2.900 Side 1: 8.0 Max Pressure 950 psi - psiMajor Diameter 3.018 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,425 psi - psi
RPMEccentricity 0.192 Tube ID 4.000 No Load Pressure Loss 149 psiContour Length 199.0 Contour Length 196.0 Speed Range 160-281
500-67705" 6:7 Lobes 7 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 2.635 Tube OD 5 Rev per Unit Volume 0.80 Rev/GalOverall Length 205.0 Overall Length 212.0 Flow Range 200-350
0
1,000
2,000
3,000
4,000
5,000
6,000
0 200 400 600 800 1,000 1,200 1,400 1,600 1,800
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
350 GPM
275 GPM
200 GPM
0
50
100
150
200
250
300
0 500 1,000 1,500 2,000
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
350 GPM
275 GPM
200 GPM
0
50
100
150
200
250
300
0 200 400 600 800 1,000 1,200 1,400 1,600 1,800
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
500-67705” 6:7 Lobes 7 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 42
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
250 Min 234 Alternate Stator OD: in.Reline Lengths (in.) Breen: Max 250.1 Min 237.7 Willis: Max87
2.673 -0.0386 2-OS 2.679 -0.0445
2.6562.667 -0.0324 OS 2-OS 2.662 -0.027 2.655 -0.020-0.021 2.658 -0.023 2.658 -0.023321
2.621 0.014 2.616 0.0190 S 2.651 -0.016
2.633 0.002 2.620 0.0152.645 -0.010
T SWillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 7,786 ft-lbs 9,344 ft-lbs 10,276 3,075 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 6,229 ft-lbs
Head Length 6.00 Side 2: 7.5 Max Torque 3,893 ft-lbsWeight 377 Weight 546 Stall Pressure 1,864 psi 2,330 psi
ft-lbs 4,866 ft-lbs 5,840 ft-lbs 6,424 2,796 psi
280XTHead Diameter 2.900 Side 1: 7.5 Max Pressure 1,165 psi 1,456 psiMajor Diameter 3.018 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,748 psi 1,922 psi
RPMEccentricity 0.192 Tube ID 4.000 No Load Pressure Loss 133 psiContour Length 235.0 Contour Length 231.0 Speed Range 121-282
500-67805" 6:7 Lobes 8 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 2.635 Tube OD 5 Rev per Unit Volume 0.81 Rev/GalOverall Length 241.0 Overall Length 246.0 Flow Range 150-350
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
0 500 1,000 1,500 2,000 2,500
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
350 GPM
250 GPM
150 GPM
0
50
100
150
200
250
300
0 500 1,000 1,500 2,000 2,500
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
350 GPM
250 GPM
150 GPM
0
50
100
150
200
250
300
350
0 500 1,000 1,500 2,000 2,500
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
500-67805” 6:7 Lobes 8 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 43
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
188 Min 198 Alternate Stator OD: 4.75 in.Reline Lengths (in.) Breen: Max - Min - Willis: Max87654321
2.7022.714 -0.0110 S 2.698 0.0050.001 2.705 -0.002T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 6,496 ft-lbs 7,795 ft-lbs 8,573 2,225 psi
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 5,194 ft-lbs
Head Length 6.00 Side 2: 8.0 Max Torque 3,248 ft-lbsWeight 312 Weight 511 Stall Pressure 1,348 psi 1,686 psi
ft-lbs 4,060 ft-lbs 4,872 ft-lbs 5,359 2,023 psi
280XTHead Diameter 2.750 Side 1: 8.0 Max Pressure 843 psi 1,054 psiMajor Diameter 3.041 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,265 psi 1,391 psi
RPMEccentricity 0.169 Tube ID 3.750 No Load Pressure Loss 117 psiContour Length 180.0 Contour Length 182.0 Speed Range 68-205
500-7850 (B)5" 7:8 Lobes 5 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 2.703 Tube OD 5 Rev per Unit Volume 0.68 Rev/GalOverall Length 186.0 Overall Length 198.0 Flow Range 100-300
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
0 200 400 600 800 1,000 1,200 1,400 1,600
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
300 GPM
200 GPM
100 GPM
0
50
100
150
200
250
0 500 1,000 1,500 2,000
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
300 GPM
200 GPM
100 GPM
0
50
100
150
200
250
0 200 400 600 800 1,000 1,200 1,400 1,600 1,800
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
500-7850 (B)5” 7:8 Lobes 5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 44
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
124 Min 112 Alternate Stator OD: 6.5 in.Reline Lengths (in.) Breen: Max - Min - Willis: Max8765
3.2353.234 -0.0144 OS 3.227 -0.007-0.015 3.235 -0.015321
3.1853.195 0.0250 S 3.178 0.0420.035 3.198 0.022T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 4,538 ft-lbs 5,445 ft-lbs 5,987 1,393 psi
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 3,627 ft-lbs
Head Length 7.00 Side 2: 8.0 Max Torque 2,269 ft-lbsWeight 282 Weight 423 Stall Pressure 844 psi 1,056 psi
ft-lbs 2,836 ft-lbs 3,404 ft-lbs 3,744 1,267 psi
280XTHead Diameter 3.500 Side 1: 8.0 Max Pressure 528 psi 660 psiMajor Diameter 3.872 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
792 psi 871 psi
RPMEccentricity 0.326 Tube ID 5.000 No Load Pressure Loss 95 psiContour Length 110.0 Contour Length 108.0 Speed Range 98-262
625-45436.25" 4:5 Lobes 4.3 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 3.220 Tube OD 6.25 Rev per Unit Volume 0.66 Rev/GalOverall Length 117.0 Overall Length 124.0 Flow Range 150-400
0
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
4,500
0 200 400 600 800 1,000
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
0.100
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
400 GPM
275 GPM
150 GPM
0
50
100
150
200
250
300
0 200 400 600 800 1,000 1,200
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
400 GPM
275 GPM
150 GPM
0
20
40
60
80
100
120
140
160
180
200
0 200 400 600 800 1,000 1,200
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
625-45436.25” 4:5 Lobes 4.3 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 45
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
203.5 Min 191.5 Alternate Stator OD: 6.5 in.Reline Lengths (in.) Breen: Max 203.5 Min 191.5 Willis: Max8765
3.2313.241 -0.0214 OS 3.221 -0.001-0.011 3.237 -0.017321
3.195 0.025 3.174 0.0460 S 3.215 0.005
3.198 0.022 3.185 0.0353.210 0.010
T SWillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 8,465 ft-lbs 10,157 ft-lbs 11,172 2,608 psi
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 6,768 ft-lbs
Head Length 7.00 Side 2: 8.0 Max Torque 4,232 ft-lbsWeight 472 Weight 698 Stall Pressure 1,580 psi 1,976 psi
ft-lbs 5,290 ft-lbs 6,348 ft-lbs 6,983 2,371 psi
280XTHead Diameter 3.500 Side 1: 8.0 Max Pressure 988 psi 1,235 psiMajor Diameter 3.872 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,482 psi 1,630 psi
RPMEccentricity 0.326 Tube ID 5.000 No Load Pressure Loss 96 psiContour Length 189.5 Contour Length 187.5 Speed Range 98-263
625-45756.25" 4:5 Lobes 7.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 3.220 Tube OD 6.25 Rev per Unit Volume 0.66 Rev/GalOverall Length 196.5 Overall Length 203.5 Flow Range 150-400
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
0 500 1,000 1,500 2,000
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
0.100
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
400 GPM
275 GPM
150 GPM
0
50
100
150
200
250
300
0 500 1,000 1,500 2,000
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
400 GPM
275 GPM
150 GPM
0
50
100
150
200
250
300
350
0 500 1,000 1,500 2,000
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
625-45756.25” 4:5 Lobes 7.5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 46
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
- Min - Alternate Stator OD: 6.5 in.Reline Lengths (in.) Breen: Max 130 Min 118 Willis: Max876543210 S 3.331 -0.002 3.332 -0.003T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 5,489 ft-lbs - - psi
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 3,657 ft-lbs
Head Length 7.50 Side 2: 8.0 Max Torque 2,287 ft-lbsWeight 488 Weight 420 Stall Pressure 908 psi - psi
ft-lbs - ft-lbs 3,431 ft-lbs - 1,363 psi
280XTHead Diameter 3.500 Side 1: 8.0 Max Pressure 568 psi - psiMajor Diameter 3.893 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
852 psi - psi
RPMEccentricity 0.282 Tube ID 5.000 No Load Pressure Loss 156 psiContour Length 189.5 Contour Length 114.0 Speed Range 68-273
625-56456.25" 5:6 Lobes 4.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 3.329 Tube OD 6.25 Rev per Unit Volume 0.68 Rev/GalOverall Length 197.0 Overall Length 130.0 Flow Range 100-400
0
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
4,500
0 200 400 600 800 1,000 1,200
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
400 GPM
250 GPM
100 GPM
0
50
100
150
200
250
300
0 200 400 600 800 1,000 1,200
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
400 GPM
250 GPM
100 GPM0
20
40
60
80
100
120
140
160
180
200
0 200 400 600 800 1,000 1,200
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
625-56456.25” 5:6 Lobes 4.5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 47
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
Min Alternate Stator OD: 6.125 in.
-0.047
Reline Lengths (in.) Breen: Max 203.5 Min 191.5 Willis: Max8
3.4577 2-OS 3.457 -0.0476543210 S 3.398 0.012 3.401 0.009T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 7,287 ft-lbs - - psi
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 4,858 ft-lbs
Head Length 6.00 Side 2: 8.0 Max Torque 3,037 ft-lbsWeight 300 Weight 649 Stall Pressure 942 psi - psi
ft-lbs - ft-lbs 4,556 ft-lbs - 1,413 psi
280XTHead Diameter 3.500 Side 1: 8.0 Max Pressure 589 psi - psiMajor Diameter 3.955 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
884 psi - psi
RPMEccentricity 0.273 Tube ID 5.000 No Load Pressure Loss 260 psiContour Length 115.5 Contour Length 187.5 Speed Range 106-267
625-56556.25" 5:6 Lobes 5.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 3.410 Tube OD 6.25 Rev per Unit Volume 0.53 Rev/GalOverall Length 121.5 Overall Length 203.5 Flow Range 200-500
0
1,000
2,000
3,000
4,000
5,000
6,000
0 200 400 600 800 1,000 1,200
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
500 GPM
350 GPM
200 GPM
0
50
100
150
200
250
300
0 200 400 600 800 1,000 1,200
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
500 GPM
350 GPM
200 GPM
0
50
100
150
200
250
0 200 400 600 800 1,000 1,200
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
625-56556.25” 5:6 Lobes 5.5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 48
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
203.2 Min 191.2 Alternate Stator OD: 6.5 in.Reline Lengths (in.) Breen: Max - Min - Willis: Max8765
3.6963.710 -0.0154 OS 3.691 0.004-0.001 3.704 -0.009321
3.6643.676 0.0190 S 3.661 0.0340.031 3.676 0.019T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 8,652 ft-lbs 10,373 ft-lbs 11,405 696 psi
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 6,915 ft-lbs
Head Length 6.00 Side 2: 7.5 Max Torque 4,326 ft-lbsWeight 598 Weight 684 Stall Pressure 422 psi 528 psi
ft-lbs 5,407 ft-lbs 6,489 ft-lbs 7,138 633 psi
280XTHead Diameter 3.500 Side 1: 7.5 Max Pressure 264 psi 330 psiMajor Diameter 4.155 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
396 psi 436 psi
RPMEccentricity 0.230 Tube ID 5.000 No Load Pressure Loss 147 psiContour Length 191.5 Contour Length 188.2 Speed Range 48-80
625-78256.25" 7:8 Lobes 2.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 3.695 Tube OD 6.25 Rev per Unit Volume 0.16 Rev/GalOverall Length 197.5 Overall Length 203.2 Flow Range 300-500
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
0 100 200 300 400 500
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
500 GPM
400 GPM
300 GPM
0
10
20
30
40
50
60
70
80
90
0 100 200 300 400 500 600
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
500 GPM
400 GPM
300 GPM
0
20
40
60
80
100
120
0 100 200 300 400 500 600
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
625-78256.25” 7:8 Lobes 2.5 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 49
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
130 Min 112 Alternate Stator OD: 6.5 in.Reline Lengths (in.) Breen: Max 130 Min 118 Willis: Max87654321
3.5193.534 -0.0043.506 0.024 3.498 0.032
0 S OS 3.527 0.0033.513 0.017 3.501 0.029
3.511 0.0190.011 3.530 0.000 3.535 -0.005T S
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 5,384 ft-lbs 6,461 ft-lbs 7,103 897 psi
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 4,307 ft-lbs
Head Length 6.00 Side 2: 8.0 Max Torque 2,692 ft-lbsWeight 339 Weight 420 Stall Pressure 544 psi 680 psi
ft-lbs 3,365 ft-lbs 4,038 ft-lbs 4,442 816 psi
280XTHead Diameter 3.500 Side 1: 8.0 Max Pressure 340 psi 425 psiMajor Diameter 3.980 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
510 psi 561 psi
RPMEccentricity 0.225 Tube ID 5.000 No Load Pressure Loss 114 psiContour Length 111.0 Contour Length 108.0 Speed Range 49-133
625-78286.25" 7:8 Lobes 2.8 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 3.530 Tube OD 6.25 Rev per Unit Volume 0.33 Rev/GalOverall Length 117.0 Overall Length 124.0 Flow Range 150-400
0
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
4,500
5,000
0 100 200 300 400 500 600 700
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
400 GPM
275 GPM
150 GPM
0
20
40
60
80
100
120
140
0 100 200 300 400 500 600 700
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
400 GPM
275 GPM
150 GPM
0
20
40
60
80
100
120
0 100 200 300 400 500 600 700
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
625-78286.25” 7:8 Lobes 2.8 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 50
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
228.8 Min 216.8 Alternate Stator OD: 6.5 in.Reline Lengths (in.) Breen: Max 228.8 Min 216.8 Willis: Max87654321
3.718 0.019 3.709 0.0280 S 3.737 0.000
3.727 0.010 3.717 0.0203.733 0.004
T SWillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 11,716 ft-lbs 14,049 ft-lbs 15,456 934 psi
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 9,366 ft-lbs
Head Length 6.00 Side 2: 8.0 Max Torque 5,858 ft-lbsWeight 688 Weight 768 Stall Pressure 566 psi 708 psi
ft-lbs 7,322 ft-lbs 8,787 ft-lbs 9,666 849 psi
280XTHead Diameter 4.000 Side 1: 8.0 Max Pressure 354 psi 443 psiMajor Diameter 4.203 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
531 psi 584 psi
RPMEccentricity 0.233 Tube ID 5.000 No Load Pressure Loss 126 psiContour Length 215.0 Contour Length 212.8 Speed Range 31-79
625-7829 (A)6.25" 7:8 Lobes 2.9 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 3.737 Tube OD 6.25 Rev per Unit Volume 0.16 Rev/GalOverall Length 221.0 Overall Length 228.8 Flow Range 200-500
0
2,000
4,000
6,000
8,000
10,000
12,000
0 100 200 300 400 500 600 700
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
500 GPM
350 GPM
200 GPM
0
10
20
30
40
50
60
70
80
90
0 100 200 300 400 500 600 700 800
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
500 GPM
350 GPM
200 GPM
0
20
40
60
80
100
120
140
160
0 100 200 300 400 500 600 700 800
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
625-7829 (A)6.25” 7:8 Lobes 2.9 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 51
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
124 Min 112 Alternate Stator OD: 6.5 in.Reline Lengths (in.) Breen: Max Min Willis: Max87654321
3.4993.509 0.0060 S 3.493 0.0220.016 3.513 0.002T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 6,422 ft-lbs 7,706 ft-lbs 8,475 1,003 psi
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 5,137 ft-lbs
Head Length 6.00 Side 2: 8.0 Max Torque 3,211 ft-lbsWeight 361 Weight 414 Stall Pressure 608 psi 760 psi
ft-lbs 4,014 ft-lbs 4,816 ft-lbs 5,298 912 psi
280XTHead Diameter 3.500 Side 1: 8.0 Max Pressure 380 psi 475 psiMajor Diameter 3.980 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
570 psi 627 psi
RPMEccentricity 0.233 Tube ID 5.000 No Load Pressure Loss 106 psiContour Length 111.0 Contour Length 108.0 Speed Range 46-124
625-78306.25" 7:8 Lobes 3 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 3.515 Tube OD 6.25 Rev per Unit Volume 0.31 Rev/GalOverall Length 117.0 Overall Length 124.0 Flow Range 150-400
0
1,000
2,000
3,000
4,000
5,000
6,000
0 100 200 300 400 500 600 700 800
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
400 GPM
275 GPM
150 GPM
0
20
40
60
80
100
120
140
0 100 200 300 400 500 600 700 800
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
400 GPM
275 GPM
150 GPM
0
20
40
60
80
100
120
140
0 100 200 300 400 500 600 700 800
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
625-78306.25” 7:8 Lobes 3 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 52
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
231.3 Min 219.3 Alternate Stator OD: 6.5 in.Reline Lengths (in.) Breen: Max Min Willis: Max87654321
3.5843.595 0.0250 S 3.580 0.0400.036 3.596 0.024T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 11,689 ft-lbs 14,021 ft-lbs 15,429 1,217 psi
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 9,343 ft-lbs
Head Length 6.00 Side 2: 8.0 Max Torque 5,844 ft-lbsWeight 645 Weight 784 Stall Pressure 737 psi 922 psi
ft-lbs 7,305 ft-lbs 8,766 ft-lbs 9,643 1,106 psi
280XTHead Diameter 3.500 Side 1: 8.0 Max Pressure 461 psi 576 psiMajor Diameter 4.070 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
692 psi 761 psi
RPMEccentricity 0.225 Tube ID 5.000 No Load Pressure Loss 113 psiContour Length 216.3 Contour Length 215.3 Speed Range 31-83
625-78356.25" 7:8 Lobes 3.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 3.620 Tube OD 6.25 Rev per Unit Volume 0.21 Rev/GalOverall Length 222.3 Overall Length 231.3 Flow Range 150-400
0
2,000
4,000
6,000
8,000
10,000
12,000
0 100 200 300 400 500 600 700 800 900
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
400 GPM
275 GPM
150 GPM
0
10
20
30
40
50
60
70
80
90
0 200 400 600 800 1,000
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
400 GPM
275 GPM
150 GPM
0
20
40
60
80
100
120
140
160
0 200 400 600 800 1,000
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
625-78356.25” 7:8 Lobes 3.5 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 53
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
203.2 Min 191.2 Alternate Stator OD: 6.5 in.Reline Lengths (in.) Breen: Max 203.5 Min 189.5 Willis: Max87654 OS 3.559 -0.029 3.557 -0.027321
3.5313.541 -0.0113.506 0.024 3.489 0.041
0 S OS 3.536 -0.0063.506 0.024 3.496 0.034
3.522 0.008-0.001 3.532 -0.002 3.528 0.002T S
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 10,123 ft-lbs 12,142 ft-lbs 13,362 1,708 psi
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 8,097 ft-lbs
Head Length 6.50 Side 2: 8.0 Max Torque 5,061 ft-lbsWeight 565 Weight 690 Stall Pressure 1,035 psi 1,294 psi
ft-lbs 6,327 ft-lbs 7,592 ft-lbs 8,352 1,552 psi
280XTHead Diameter 3.500 Side 1: 8.0 Max Pressure 647 psi 809 psiMajor Diameter 3.980 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
971 psi 1,068 psi
RPMEccentricity 0.225 Tube ID 5.000 No Load Pressure Loss 140 psiContour Length 188.5 Contour Length 187.2 Speed Range 67-168
625-78486.25" 7:8 Lobes 4.8 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 3.530 Tube OD 6.25 Rev per Unit Volume 0.34 Rev/GalOverall Length 195.0 Overall Length 203.2 Flow Range 200-500
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
10,000
0 200 400 600 800 1,000 1,200
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
500 GPM
350 GPM
200 GPM
0
20
40
60
80
100
120
140
160
180
0 200 400 600 800 1,000 1,200 1,400
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
500 GPM
350 GPM
200 GPM
0
50
100
150
200
250
300
0 200 400 600 800 1,000 1,200 1,400
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
625-78486.25” 7:8 Lobes 4.8 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 54
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
121.9 Min 109.9 Alternate Stator OD: - in.Reline Lengths (in.) Breen: Max - Min - Willis: Max87654321
3.6403.662 -0.0020 S 3.634 0.0260.020 3.653 0.007T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 4,012 ft-lbs 4,814 ft-lbs 5,296 1,011 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 3,206 ft-lbs
Head Length 7.29 Side 2: 10.0 Max Torque 2,006 ft-lbsWeight 284 Weight 443 Stall Pressure 612 psi 766 psi
ft-lbs 2,507 ft-lbs 3,009 ft-lbs 3,310 919 psi
280XTHead Diameter 4.220 Side 1: 10.0 Max Pressure 383 psi 479 psiMajor Diameter 4.220 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
575 psi 632 psi
RPMEccentricity 0.280 Tube ID 5.250 No Load Pressure Loss 151 psiContour Length 104.7 Contour Length 101.9 Speed Range 157-315
650-56356.5" 5:6 Lobes 3.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 3.660 Tube OD 6.5 Rev per Unit Volume 0.53 Rev/GalOverall Length 112.0 Overall Length 121.9 Flow Range 300-600
0
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
0 100 200 300 400 500 600 700 800
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
600 GPM
450 GPM
300 GPM
0
50
100
150
200
250
300
350
0 100 200 300 400 500 600 700 800
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
600 GPM
450 GPM
300 GPM
0
20
40
60
80
100
120
140
160
180
200
0 100 200 300 400 500 600 700 800
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
650-56356.5” 5:6 Lobes 3.5 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 55
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
131 Min 113 Alternate Stator OD: 6.75 in.Reline Lengths (in.) Breen: Max 131.1 Min 117 Willis: Max8765
4.0934.106 0.0074 OS OS 4.110 0.003 4.095 0.0180.020 4.110 0.003 4.111 0.002321
4.0554.066 0.0470 S S 4.066 0.047 4.050 0.0630.058 4.065 0.048 4.068 0.045T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 8,874 ft-lbs 10,640 ft-lbs 11,704 1,100 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 7,097 ft-lbs
Head Length 7.40 Side 2: 7.3 Max Torque 4,437 ft-lbsWeight 503 Weight 355 Stall Pressure 667 psi 834 psi
ft-lbs 5,546 ft-lbs 6,655 ft-lbs 7,321 1,000 psi
280XTHead Diameter 4.000 Side 1: 7.3 Max Pressure 417 psi 521 psiMajor Diameter 4.600 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
626 psi 688 psi
RPMEccentricity 0.244 Tube ID 5.500 No Load Pressure Loss 106 psiContour Length 111.1 Contour Length 110.5 Speed Range 48-96
650-89306.5" 8:9 Lobes 3 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 4.113 Tube OD 6.5 Rev per Unit Volume 0.24 Rev/GalOverall Length 118.5 Overall Length 125.0 Flow Range 200-400
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
0 100 200 300 400 500 600 700 800
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
400 GPM
300 GPM
200 GPM
0
20
40
60
80
100
120
0 200 400 600 800 1,000
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
400 GPM
300 GPM
200 GPM
0
20
40
60
80
100
120
140
0 100 200 300 400 500 600 700 800 900
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
650-89306.5” 8:9 Lobes 3 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 56
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
Min Alternate Stator OD: in.Reline Lengths (in.) Breen: Max 170.1 Min 156.1 Willis: Max8765
0.012 3.873 0.015 3.855 0.0334
3.875 0.013 3.860 0.028 3.8763 S S 3.880 0.008210T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 17,215 ft-lbs 20,649 ft-lbs 22,715 1,528 psi
Thread Form 62C0005 Material Alloy Steel Stall Torque 13,766 ft-lbs
Head Length 6.00 Side 2: 8.0 Max Torque 8,607 ft-lbsWeight 518 Weight 547 Stall Pressure 926 psi 1,158 psi
ft-lbs 10,759 ft-lbs 12,911 ft-lbs 14,202 1,389 psi
280XTHead Diameter 3.800 Side 1: 8.0 Max Pressure 579 psi 724 psiMajor Diameter 4.320 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
869 psi 955 psi
RPMEccentricity 0.216 Tube ID 5.250 No Load Pressure Loss 139 psiContour Length 146.0 Contour Length 154.0 Speed Range 34-86
650-89406.5" 8:9 Lobes 4 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 3.888 Tube OD 6.5 Rev per Unit Volume 0.17 Rev/GalOverall Length 152.0 Overall Length 170.0 Flow Range 200-500
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
0 200 400 600 800 1,000 1,200
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
500 GPM
350 GPM
200 GPM
0
10
20
30
40
50
60
70
80
90
100
0 200 400 600 800 1,000 1,200
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
500 GPM
350 GPM
200 GPM
0
50
100
150
200
250
0 200 400 600 800 1,000 1,200
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
650-89406.5” 8:9 Lobes 4 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 57
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
214.5 Min 202.5 Alternate Stator OD: - in.Reline Lengths (in.) Breen: Max - Min - Willis: Max87654321
3.6383.650 -0.0060 S 3.630 0.0140.006 3.652 -0.009T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 9,251 ft-lbs 11,090 ft-lbs 12,208 863 psi
Thread Form 2 7/8" API IF Material Alloy Steel Stall Torque 7,398 ft-lbs
Head Length 7.50 Side 2: 8.0 Max Torque 4,625 ft-lbsWeight 599 Weight 672 Stall Pressure 523 psi 654 psi
ft-lbs 5,782 ft-lbs 6,938 ft-lbs 7,632 784 psi
280XTHead Diameter 4.100 Side 1: 8.0 Max Pressure 327 psi 409 psiMajor Diameter 4.008 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
491 psi 540 psi
RPMEccentricity 0.182 Tube ID 5.500 No Load Pressure Loss 201 psiContour Length 201.0 Contour Length 198.5 Speed Range 35-88
650-910376.5" 9:10 Lobes 3.7 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 3.644 Tube OD 6.5 Rev per Unit Volume 0.18 Rev/GalOverall Length 208.5 Overall Length 214.5 Flow Range 200-500
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
0 100 200 300 400 500 600 700
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
500 GPM
350 GPM
200 GPM
0
10
20
30
40
50
60
70
80
90
100
0 100 200 300 400 500 600 700
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
500 GPM
350 GPM
200 GPM
0
20
40
60
80
100
120
140
0 100 200 300 400 500 600 700
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
650-910376.5” 9:10 Lobes 3.7 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 58
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
152 Min 140 Alternate Stator OD: - in.Reline Lengths (in.) Breen: Max - Min - Willis: Max87654321
3.6523.664 -0.0110 S 3.643 0.0110.001 3.661 -0.008T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 7,546 ft-lbs 9,054 ft-lbs 9,955 1,393 psi
Thread Form 2 7/8" API IF Material Alloy Steel Stall Torque 6,031 ft-lbs
Head Length 7.50 Side 2: 8.0 Max Torque 3,773 ft-lbsWeight 430 Weight 472 Stall Pressure 844 psi 1,056 psi
ft-lbs 4,716 ft-lbs 5,660 ft-lbs 6,226 1,267 psi
280XTHead Diameter 4.100 Side 1: 8.0 Max Pressure 528 psi 660 psiMajor Diameter 4.012 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
792 psi 871 psi
RPMEccentricity 0.179 Tube ID 5.500 No Load Pressure Loss 199 psiContour Length 139.0 Contour Length 136.0 Speed Range 70-175
650-910406.5" 9:10 Lobes 4 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 3.654 Tube OD 6.5 Rev per Unit Volume 0.35 Rev/GalOverall Length 146.5 Overall Length 152.0 Flow Range 200-500
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
0 200 400 600 800 1,000
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
500 GPM
350 GPM
200 GPM
0
20
40
60
80
100
120
140
160
180
200
0 200 400 600 800 1,000 1,200
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
500 GPM
350 GPM
200 GPM
0
50
100
150
200
250
0 200 400 600 800 1,000 1,200
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
650-910406.5” 9:10 Lobes 4 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 59
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
- Min - Alternate Stator OD: - in.Reline Lengths (in.) Breen: Max 200 Min 188 Willis: Max87654 OS 2.993 -0.048 3.001 -0.0563210T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 7,410 ft-lbs - - psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 4,938 ft-lbs
Head Length 6.00 Side 2: 8.0 Max Torque 3,088 ft-lbsWeight 384 Weight 770 Stall Pressure 1,281 psi - psi
ft-lbs - ft-lbs 4,632 ft-lbs - 1,922 psi
280XTHead Diameter 3.920 Side 1: 8.0 Max Pressure 801 psi - psiMajor Diameter 3.919 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,202 psi - psi
RPMEccentricity 0.487 Tube ID 5.500 No Load Pressure Loss 127 psiContour Length 188.0 Contour Length 184.0 Speed Range 228-457
675-23706.75" 2:3 Lobes 7 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 2.945 Tube OD 6.75 Rev per Unit Volume 0.76 Rev/GalOverall Length 194.0 Overall Length 200.0 Flow Range 300-600
0
1,000
2,000
3,000
4,000
5,000
6,000
0 200 400 600 800 1,000 1,200 1,400 1,600
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
600 GPM
450 GPM
300 GPM
0
50
100
150
200
250
300
350
400
450
500
0 200 400 600 800 1,000 1,200 1,400 1,600
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
600 GPM
450 GPM
300 GPM
0
50
100
150
200
250
300
350
400
450
0 200 400 600 800 1,000 1,200 1,400 1,600
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
675-23706.75” 2:3 Lobes 7 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 60
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
210 Min 198 Alternate Stator OD: - in.Reline Lengths (in.) Breen: Max - Min - Willis: Max87654321
2.9542.981 0.0390 S 2.949 0.0710.066 2.974 0.046T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 6,358 ft-lbs 7,627 ft-lbs 8,392 2,500 psi
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 5,086 ft-lbs
Head Length 7.00 Side 2: 7.5 Max Torque 3,179 ft-lbsWeight 414 Weight 807 Stall Pressure 1,515 psi 1,894 psi
ft-lbs 3,973 ft-lbs 4,768 ft-lbs 5,245 2,272 psi
280XTHead Diameter 3.500 Side 1: 7.5 Max Pressure 947 psi 1,184 psiMajor Diameter 4.020 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,421 psi 1,563 psi
RPMEccentricity 0.500 Tube ID 5.500 No Load Pressure Loss 105 psiContour Length 195.5 Contour Length 195.0 Speed Range 262-525
675-23806.75" 2:3 Lobes 8 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 3.020 Tube OD 6.75 Rev per Unit Volume 0.88 Rev/GalOverall Length 202.5 Overall Length 210.0 Flow Range 300-600
0
1,000
2,000
3,000
4,000
5,000
6,000
0 200 400 600 800 1,000 1,200 1,400 1,600 1,800
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0.140
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
600 GPM
450 GPM
300 GPM
0
100
200
300
400
500
600
0 500 1,000 1,500 2,000
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
600 GPM
450 GPM
300 GPM
0
100
200
300
400
500
600
0 500 1,000 1,500 2,000
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
675-23806.75” 2:3 Lobes 8 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 61
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
153 Min 136.5 Alternate Stator OD: 6.50 / 7.00 in.Reline Lengths (in.) Breen: Max 153.5 Min 139.5 Willis: Max87654321
3.5113.529 -0.0193.489 0.021 3.461 0.049
0 S OS 3.516 -0.0063.486 0.024 3.470 0.040
3.493 0.017-0.001 3.521 -0.011 3.529 -0.019T S
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 6,512 ft-lbs 7,813 ft-lbs 8,592 1,512 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 5,205 ft-lbs
Head Length 7.16 Side 2: 7.5 Max Torque 3,256 ft-lbsWeight 406 Weight 560 Stall Pressure 916 psi 1,146 psi
ft-lbs 4,070 ft-lbs 4,884 ft-lbs 5,372 1,375 psi
280XTHead Diameter 4.000 Side 1: 7.5 Max Pressure 573 psi 716 psiMajor Diameter 4.220 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
860 psi 945 psi
RPMEccentricity 0.355 Tube ID 5.500 No Load Pressure Loss 120 psiContour Length 134.3 Contour Length 133.5 Speed Range 148-297
675-45486.75" 4:5 Lobes 4.8 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 3.510 Tube OD 6.75 Rev per Unit Volume 0.50 Rev/GalOverall Length 141.5 Overall Length 148.5 Flow Range 300-600
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
0 200 400 600 800 1,000 1,200
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
600 GPM
450 GPM
300 GPM
0
50
100
150
200
250
300
350
0 200 400 600 800 1,000 1,200
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
600 GPM
450 GPM
300 GPM
0
50
100
150
200
250
300
350
0 200 400 600 800 1,000 1,200
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
675-45486.75” 4:5 Lobes 4.8 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 62
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
146 Min 134 Alternate Stator OD: - in.Reline Lengths (in.) Breen: Max - Min - Willis: Max8765
3.5983.614 -0.0174 OS 3.591 0.006-0.001 3.612 -0.015321
3.5343.552 0.0450 S 3.526 0.0710.063 3.549 0.048T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 6,569 ft-lbs 7,880 ft-lbs 8,670 1,626 psi
Thread Form 2 3/8" API IF Material Alloy Steel Stall Torque 5,252 ft-lbs
Head Length 7.81 Side 2: 8.0 Max Torque 3,284 ft-lbsWeight 409 Weight 547 Stall Pressure 985 psi 1,232 psi
ft-lbs 4,105 ft-lbs 4,926 ft-lbs 5,419 1,478 psi
280XTHead Diameter 4.125 Side 1: 8.0 Max Pressure 616 psi 770 psiMajor Diameter 4.321 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
924 psi 1,016 psi
RPMEccentricity 0.362 Tube ID 5.500 No Load Pressure Loss 106 psiContour Length 128.7 Contour Length 130.0 Speed Range 105-264
675-45506.75" 4:5 Lobes 5 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 3.597 Tube OD 6.75 Rev per Unit Volume 0.53 Rev/GalOverall Length 136.5 Overall Length 146.0 Flow Range 200-500
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
0 200 400 600 800 1,000 1,200
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
500 GPM
350 GPM
200 GPM
0
50
100
150
200
250
300
0 200 400 600 800 1,000 1,200 1,400
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
500 GPM
350 GPM
200 GPM
0
50
100
150
200
250
300
0 200 400 600 800 1,000 1,200 1,400
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
675-45506.75” 4:5 Lobes 5 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 63
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
214 Min 198 Alternate Stator OD: 6.50 / 7.00 in.Reline Lengths (in.) Breen: Max 214.6 Min 200.6 Willis: Max8765
3.5363.560 -0.0504 OS 2-OS 3.552 -0.042 3.530 -0.020-0.026 3.549 -0.039 3.552 -0.0423
3.5222 0.5-OS 1.5-OS 3.523 -0.013 3.520 -0.010-0.012 3.530 -0.020 3.535 -0.0251
3.5173.530 -0.0200.023 3.473 0.037 3.467 0.043
0 S OS 3.519 -0.0093.486 0.024 3.468 0.042 3.487
3.512 -0.002-0.007 3.516 -0.006 3.519 -0.009T U/S S 3.486 0.024
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 10,133 ft-lbs 12,159 ft-lbs 13,373 2,357 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 8,102 ft-lbs
Head Length 7.00 Side 2: 7.5 Max Torque 5,066 ft-lbsWeight 579 Weight 794 Stall Pressure 1,428 psi 1,786 psi
ft-lbs 6,333 ft-lbs 7,600 ft-lbs 8,360 2,143 psi
280XTHead Diameter 4.000 Side 1: 7.5 Max Pressure 893 psi 1,116 psiMajor Diameter 4.220 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,340 psi 1,473 psi
RPMEccentricity 0.355 Tube ID 5.500 No Load Pressure Loss 120 psiContour Length 195.5 Contour Length 195.0 Speed Range 149-298
675-45706.75" 4:5 Lobes 7 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 3.510 Tube OD 6.75 Rev per Unit Volume 0.50 Rev/GalOverall Length 202.5 Overall Length 210.0 Flow Range 300-600
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
10,000
0 200 400 600 800 1,000 1,200 1,400 1,600 1,800
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
600 GPM
450 GPM
300 GPM
0
50
100
150
200
250
300
350
0 500 1,000 1,500 2,000
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
600 GPM
450 GPM
300 GPM
0
50
100
150
200
250
300
350
400
450
500
0 200 400 600 800 1,000 1,200 1,400 1,600 1,800
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
675-45706.75” 4:5 Lobes 7 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 64
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
181.5 Min 169.5 Alternate Stator OD: - in.
3.613 -0.042 3.587 -0.0163.613 -0.042 3.594
Reline Lengths (in.) Breen: Max - Min - Willis: Max8
-0.0237 2-OS654321
3.5513.572 -0.0010 S 3.543 0.0280.020 3.571 0.000T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 8,918 ft-lbs 10,695 ft-lbs 11,765 1,628 psi
Thread Form 2 7/8" API IF Material Alloy Steel Stall Torque 7,133 ft-lbs
Head Length 7.50 Side 2: 8.6 Max Torque 4,459 ft-lbsWeight 487 Weight 711 Stall Pressure 987 psi 1,234 psi
ft-lbs 5,573 ft-lbs 6,688 ft-lbs 7,357 1,480 psi
280XTHead Diameter 4.285 Side 1: 8.6 Max Pressure 617 psi 771 psiMajor Diameter 4.185 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
926 psi 1,018 psi
RPMEccentricity 0.307 Tube ID 5.450 No Load Pressure Loss 133 psiContour Length 168.0 Contour Length 164.3 Speed Range 114-228
675-5650 (A)6.75" 5:6 Lobes 5 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 3.572 Tube OD 6.75 Rev per Unit Volume 0.38 Rev/GalOverall Length 175.5 Overall Length 181.5 Flow Range 300-600
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
0 200 400 600 800 1,000 1,200
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
600 GPM
450 GPM
300 GPM
0
50
100
150
200
250
0 200 400 600 800 1,000 1,200 1,400
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
600 GPM
450 GPM
300 GPM
0
50
100
150
200
250
300
350
0 200 400 600 800 1,000 1,200 1,400
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
675-5650 (A)6.75” 5:6 Lobes 5 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 65
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
- Min - Alternate Stator OD: - in.Reline Lengths (in.) Breen: Max 196.5 Min 186 Willis: Max876543210 S 3.391 -0.012 3.394 -0.015T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 19,774 ft-lbs - - psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 13,173 ft-lbs
Head Length 6.00 Side 2: 8.0 Max Torque 8,240 ft-lbsWeight 516 Weight 637 Stall Pressure 924 psi - psi
ft-lbs - ft-lbs 12,360 ft-lbs - 1,387 psi
280XTHead Diameter 4.000 Side 1: 8.0 Max Pressure 578 psi - psiMajor Diameter 3.966 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
867 psi - psi
RPMEccentricity 0.294 Tube ID 5.500 No Load Pressure Loss 107 psiContour Length 184.0 Contour Length 180.5 Speed Range 58-116
675-5650 (B)6.75" 5:6 Lobes 5 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 3.379 Tube OD 6.75 Rev per Unit Volume 0.19 Rev/GalOverall Length 190.0 Overall Length 196.5 Flow Range 300-600
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
0 200 400 600 800 1,000 1,200
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
0.100
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
600 GPM
450 GPM
300 GPM
0
20
40
60
80
100
120
140
0 200 400 600 800 1,000 1,200
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
600 GPM
450 GPM
300 GPM
0
50
100
150
200
250
300
0 200 400 600 800 1,000 1,200
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
675-5650 (B)6.75” 5:6 Lobes 5 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 66
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
- Min - Alternate Stator OD: 6.5 in.Reline Lengths (in.) Breen: Max 227 Min 216 Willis: Max876543210 S 3.679 0.011 3.672 0.018T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 15,999 ft-lbs - - psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 10,666 ft-lbs
Head Length 8.60 Side 2: 8.0 Max Torque 6,668 ft-lbsWeight 696 Weight 887 Stall Pressure 1,254 psi - psi
ft-lbs - ft-lbs 10,002 ft-lbs - 1,881 psi
280XTHead Diameter 4.130 Side 1: 8.0 Max Pressure 784 psi - psiMajor Diameter 4.316 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,176 psi - psi
RPMEccentricity 0.313 Tube ID 5.500 No Load Pressure Loss 232 psiContour Length 213.4 Contour Length 211.0 Speed Range 97-194
675-56686.75" 5:6 Lobes 6.8 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 3.690 Tube OD 6.75 Rev per Unit Volume 0.32 Rev/GalOverall Length 222.0 Overall Length 227.0 Flow Range 300-600
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
0 200 400 600 800 1,000 1,200 1,400 1,600
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
600 GPM
450 GPM
300 GPM
0
50
100
150
200
250
0 200 400 600 800 1,000 1,200 1,400 1,600
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
600 GPM
450 GPM
300 GPM
0
50
100
150
200
250
300
350
400
0 200 400 600 800 1,000 1,200 1,400 1,600
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
675-56686.75” 5:6 Lobes 6.8 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 67
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
206 Min 188 Alternate Stator OD: 6.50 / 7.00 in.
-0.053
Reline Lengths (in.) Breen: Max 200 Min 186 Willis: Max8
3.7923.770 -0.031
7 2-OS 3.787 -0.0483.778 -0.039 3.779 -0.0403.794 -0.0556 2-OS
5
3.755 -0.016 3.736 0.0034 OS 3.773 -0.034
3.759 -0.020 3.746 -0.0073.767 -0.028
3 OS21
0.009 3.728 0.011 3.720 0.0190 S 3.750 -0.011
3.735 0.004 3.722 0.017 3.7303.744 -0.005
T US S 3.739 0.000WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 12,733 ft-lbs 15,280 ft-lbs 16,801 1,768 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 10,187 ft-lbs
Head Length 6.00 Side 2: 7.3 Max Torque 6,366 ft-lbsWeight 601 Weight 746 Stall Pressure 1,072 psi 1,340 psi
ft-lbs 7,958 ft-lbs 9,550 ft-lbs 10,505 1,608 psi
280XTHead Diameter 4.000 Side 1: 7.3 Max Pressure 670 psi 838 psiMajor Diameter 4.316 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,005 psi 1,106 psi
RPMEccentricity 0.288 Tube ID 5.500 No Load Pressure Loss 131 psiContour Length 188.0 Contour Length 185.5 Speed Range 85-170
675-67506.75" 6:7 Lobes 5 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 3.739 Tube OD 6.75 Rev per Unit Volume 0.28 Rev/GalOverall Length 194.0 Overall Length 200.0 Flow Range 300-600
0
2,000
4,000
6,000
8,000
10,000
12,000
0 200 400 600 800 1,000 1,200 1,400
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
0.100
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
600 GPM
450 GPM
300 GPM
0
20
40
60
80
100
120
140
160
180
0 200 400 600 800 1,000 1,200 1,400
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
600 GPM
450 GPM
300 GPM
0
50
100
150
200
250
300
350
0 200 400 600 800 1,000 1,200 1,400
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
675-67506.75” 6:7 Lobes 5 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 68
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
- Min - Alternate Stator OD: 6.5 in.Reline Lengths (in.) Breen: Max 250 Min 236 Willis: Max87654 OS 3.770 -0.031 3.765 -0.0263210 S 3.750 -0.011 3.739 0.000T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 21,058 ft-lbs - - psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 14,038 ft-lbs
Head Length 6.00 Side 2: 8.0 Max Torque 8,774 ft-lbsWeight 740 Weight 973 Stall Pressure 1,232 psi - psi
ft-lbs - ft-lbs 13,161 ft-lbs - 1,848 psi
280XTHead Diameter 4.000 Side 1: 8.0 Max Pressure 770 psi - psiMajor Diameter 4.316 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,155 psi - psi
RPMEccentricity 0.288 Tube ID 5.500 No Load Pressure Loss 236 psiContour Length 236.0 Contour Length 234.0 Speed Range 70-141
675-67606.75" 6:7 Lobes 6 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 3.739 Tube OD 6.75 Rev per Unit Volume 0.24 Rev/GalOverall Length 242.0 Overall Length 250.0 Flow Range 300-600
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
0 200 400 600 800 1,000 1,200 1,400 1,600
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
600 GPM
450 GPM
300 GPM
0
20
40
60
80
100
120
140
160
0 200 400 600 800 1,000 1,200 1,400 1,600
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
600 GPM
450 GPM
300 GPM
0
50
100
150
200
250
300
350
400
0 200 400 600 800 1,000 1,200 1,400 1,600
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
675-67606.75” 6:7 Lobes 6 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 69
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
153.5 Min 141.5 Alternate Stator OD: 6.5 in.Reline Lengths (in.) Breen: Max Min Willis: Max87654321
3.9663.978 0.0120 S 3.959 0.0310.024 3.983 0.007T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 6,954 ft-lbs 8,330 ft-lbs 9,167 493 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 5,560 ft-lbs
Head Length 7.40 Side 2: 8.0 Max Torque 3,477 ft-lbsWeight 547 Weight 565 Stall Pressure 299 psi 374 psi
ft-lbs 4,346 ft-lbs 5,215 ft-lbs 5,737 448 psi
280XTHead Diameter 4.000 Side 1: 8.0 Max Pressure 187 psi 234 psiMajor Diameter 4.500 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
281 psi 309 psi
RPMEccentricity 0.255 Tube ID 5.500 No Load Pressure Loss 140 psiContour Length 139.6 Contour Length 137.5 Speed Range 42-85
675-7820 (A)6.75" 7:8 Lobes 2 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 3.990 Tube OD 6.75 Rev per Unit Volume 0.14 Rev/GalOverall Length 147.0 Overall Length 153.5 Flow Range 300-600
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
0 50 100 150 200 250 300 350
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
600 GPM
450 GPM
300 GPM
0
10
20
30
40
50
60
70
80
90
0 50 100 150 200 250 300 350 400
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
600 GPM
450 GPM
300 GPM
0
10
20
30
40
50
60
70
80
90
100
0 50 100 150 200 250 300 350 400
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
675-7820 (A)6.75” 7:8 Lobes 2 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 70
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
Min Alternate Stator OD: 6.5 in.Reline Lengths (in.) Breen: Max 153.5 Min 139.5 Willis: Max87654321
0.0370 S 3.802 0.006
3.7713.793 0.015
T US 3.771 0.037WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 6,113 ft-lbs - - psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 4,058 ft-lbs
Head Length 6.70 Side 2: 8.0 Max Torque 2,549 ft-lbsWeight 452 Weight 578 Stall Pressure 164 psi - psi
ft-lbs - ft-lbs 3,823 ft-lbs - 247 psi
280XTHead Diameter 4.000 Side 1: 8.0 Max Pressure 103 psi - psiMajor Diameter 4.295 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
155 psi - psi
RPMEccentricity 0.244 Tube ID 5.500 No Load Pressure Loss 228 psiContour Length 140.3 Contour Length 137.5 Speed Range 21-53
675-7820 (B)6.75" 7:8 Lobes 2 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 3.808 Tube OD 6.75 Rev per Unit Volume 0.11 Rev/GalOverall Length 147.0 Overall Length 153.5 Flow Range 200-500
0
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
4,500
5,000
0 50 100 150 200
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
500 GPM
350 GPM
200 GPM
0
10
20
30
40
50
60
0 50 100 150 200
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
500 GPM
350 GPM
200 GPM
0
5
10
15
20
25
30
35
40
0 50 100 150 200
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
675-7820 (B)6.75” 7:8 Lobes 2 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 71
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
230 Min 218 Alternate Stator OD: 7 in.Reline Lengths (in.) Breen: Max - Min - Willis: Max87654321
3.8133.823 -0.0050 S 3.808 0.0100.005 3.820 -0.002T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 7,907 ft-lbs 9,470 ft-lbs 10,431 467 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 6,321 ft-lbs
Head Length 8.00 Side 2: 9.0 Max Torque 3,953 ft-lbsWeight 672 Weight 967 Stall Pressure 283 psi 354 psi
ft-lbs 4,942 ft-lbs 5,930 ft-lbs 6,523 424 psi
280XTHead Diameter 4.000 Side 1: 9.0 Max Pressure 177 psi 221 psiMajor Diameter 4.265 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
266 psi 292 psi
RPMEccentricity 0.224 Tube ID 5.310 No Load Pressure Loss 170 psiContour Length 213.0 Contour Length 212.0 Speed Range 35-70
675-78216.75" 7:8 Lobes 2.1 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 3.818 Tube OD 6.75 Rev per Unit Volume 0.12 Rev/GalOverall Length 221.0 Overall Length 230.0 Flow Range 300-600
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
0 50 100 150 200 250 300 350
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
600 GPM
450 GPM
300 GPM
0
10
20
30
40
50
60
70
80
0 50 100 150 200 250 300 350 400
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
600 GPM
450 GPM
300 GPM
0
10
20
30
40
50
60
70
80
90
0 50 100 150 200 250 300 350 400
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
675-78216.75” 7:8 Lobes 2.1 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 72
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
220 Min 208 Alternate Stator OD: 6.5 in.Reline Lengths (in.) Breen: Max 220 Min 206 Willis: Max87
-0.0406
3.8485 OS 3.855 -0.04743
3.8113.822 -0.0142 0.5-OS OS 3.815 -0.007 3.810 -0.002-0.003 3.821 -0.013 3.820 -0.0121
3.779 0.029 3.766 0.0420 S 3.801 0.007
3.791 0.017 3.777 0.0313.796 0.012
T SWillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 10,462 ft-lbs 12,548 ft-lbs 13,796 873 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 8,360 ft-lbs
Head Length 7.00 Side 2: 8.0 Max Torque 5,231 ft-lbsWeight 653 Weight 836 Stall Pressure 529 psi 662 psi
ft-lbs 6,538 ft-lbs 7,846 ft-lbs 8,631 794 psi
280XTHead Diameter 4.000 Side 1: 8.0 Max Pressure 331 psi 414 psiMajor Diameter 4.296 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
497 psi 546 psi
RPMEccentricity 0.244 Tube ID 5.500 No Load Pressure Loss 161 psiContour Length 206.5 Contour Length 204.0 Speed Range 50-100
675-7829 (B)6.75" 7:8 Lobes 2.9 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 3.808 Tube OD 6.75 Rev per Unit Volume 0.17 Rev/GalOverall Length 213.5 Overall Length 220.0 Flow Range 300-600
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
10,000
0 100 200 300 400 500 600 700
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
0.100
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
600 GPM
450 GPM
300 GPM
0
20
40
60
80
100
120
0 100 200 300 400 500 600 700
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
600 GPM
450 GPM
300 GPM
0
20
40
60
80
100
120
140
160
180
0 100 200 300 400 500 600 700
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
675-7829 (B)6.75” 7:8 Lobes 2.9 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 73
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
131 Min 113 Alternate Stator OD: 6.5 in.Reline Lengths (in.) Breen: Max 131.1 Min 117 Willis: Max8765
4.0234.034 -0.0264 OS 2-OS 4.043 -0.035 4.016 -0.008-0.015 4.043 -0.035 4.030 -0.022321
4.0044.016 -0.0083.980 0.028 3.959 0.049
0 S OS 4.012 -0.0033.979 0.029 3.967 0.041
3.995 0.0130.005 4.007 0.002 4.010 -0.002T S
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 6,675 ft-lbs 8,003 ft-lbs 8,807 942 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 5,338 ft-lbs
Head Length 7.16 Side 2: 7.3 Max Torque 3,337 ft-lbsWeight 443 Weight 459 Stall Pressure 571 psi 714 psi
ft-lbs 4,172 ft-lbs 5,006 ft-lbs 5,507 856 psi
280XTHead Diameter 4.000 Side 1: 7.3 Max Pressure 357 psi 446 psiMajor Diameter 4.520 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
536 psi 589 psi
RPMEccentricity 0.256 Tube ID 5.500 No Load Pressure Loss 145 psiContour Length 111.3 Contour Length 110.5 Speed Range 84-169
675-7830 (A)6.75" 7:8 Lobes 3 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 4.009 Tube OD 6.75 Rev per Unit Volume 0.28 Rev/GalOverall Length 118.5 Overall Length 125.0 Flow Range 300-600
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
0 100 200 300 400 500 600 700
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
600 GPM
450 GPM
300 GPM
0
20
40
60
80
100
120
140
160
180
0 100 200 300 400 500 600 700 800
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
600 GPM
450 GPM
300 GPM
0
20
40
60
80
100
120
140
160
180
0 100 200 300 400 500 600 700 800
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
675-7830 (A)6.75” 7:8 Lobes 3 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 74
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
204 Min 192 Alternate Stator OD: 6.5 in.Reline Lengths (in.) Breen: Max - Min - Willis: Max87654321
4.0354.049 0.0120 S 4.032 0.0290.026 4.045 0.016T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 12,380 ft-lbs 14,843 ft-lbs 16,334 942 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 9,901 ft-lbs
Head Length 7.40 Side 2: 7.5 Max Torque 6,190 ft-lbsWeight 757 Weight 748 Stall Pressure 571 psi 714 psi
ft-lbs 7,738 ft-lbs 9,285 ft-lbs 10,214 856 psi
280XTHead Diameter 4.000 Side 1: 7.5 Max Pressure 357 psi 446 psiMajor Diameter 4.569 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
536 psi 589 psi
RPMEccentricity 0.254 Tube ID 5.500 No Load Pressure Loss 138 psiContour Length 190.1 Contour Length 189.0 Speed Range 45-91
675-7830 (B)6.75" 7:8 Lobes 3 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 4.062 Tube OD 6.75 Rev per Unit Volume 0.15 Rev/GalOverall Length 197.5 Overall Length 204.0 Flow Range 300-600
0
2,000
4,000
6,000
8,000
10,000
12,000
0 100 200 300 400 500 600 700
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
600 GPM
450 GPM
300 GPM
0
10
20
30
40
50
60
70
80
90
100
0 100 200 300 400 500 600 700 800
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
600 GPM
450 GPM
300 GPM
0
20
40
60
80
100
120
140
160
180
0 100 200 300 400 500 600 700 800
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
675-7830 (B)6.75” 7:8 Lobes 3 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 75
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
245 Min 233 Alternate Stator OD: 6.50 / 7.00 in.Reline Lengths (in.) Breen: Max 245 Min 230.6 Willis: Max8765
4.0024.016 -0.0264 OS OS 4.023 -0.033 3.996 -0.006-0.012 4.018 -0.028 4.015 -0.025321
3.9663.978 0.0120 S S 3.986 0.004 3.976 0.0140.024 3.980 0.010 3.974 0.016T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 15,062 ft-lbs 18,074 ft-lbs 19,878 1,069 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 12,049 ft-lbs
Head Length 7.40 Side 2: 8.0 Max Torque 7,531 ft-lbsWeight 889 Weight 905 Stall Pressure 648 psi 810 psi
ft-lbs 9,413 ft-lbs 11,296 ft-lbs 12,426 972 psi
280XTHead Diameter 4.000 Side 1: 8.0 Max Pressure 405 psi 506 psiMajor Diameter 4.500 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
608 psi 668 psi
RPMEccentricity 0.255 Tube ID 5.500 No Load Pressure Loss 140 psiContour Length 231.1 Contour Length 229.0 Speed Range 42-85
675-78336.75" 7:8 Lobes 3.3 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 3.990 Tube OD 6.75 Rev per Unit Volume 0.14 Rev/GalOverall Length 238.5 Overall Length 245.0 Flow Range 300-600
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
0 100 200 300 400 500 600 700 800
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
600 GPM
450 GPM
300 GPM
0
10
20
30
40
50
60
70
80
90
0 200 400 600 800 1,000
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
600 GPM
450 GPM
300 GPM
0
50
100
150
200
250
0 100 200 300 400 500 600 700 800 900
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
675-78336.75” 7:8 Lobes 3.3 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 76
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
260 Min 248 Alternate Stator OD: 6.5 in.Reline Lengths (in.) Breen: Max - Min - Willis: Max87654321
4.1464.149 -0.0040 S 4.137 0.008-0.001 4.147 -0.002T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 16,317 ft-lbs 19,569 ft-lbs 21,532 1,185 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 13,046 ft-lbs
Head Length 7.00 Side 2: 8.0 Max Torque 8,158 ft-lbsWeight 899 Weight 971 Stall Pressure 718 psi 898 psi
ft-lbs 10,198 ft-lbs 12,238 ft-lbs 13,461 1,077 psi
280XTHead Diameter 4.000 Side 1: 8.0 Max Pressure 449 psi 561 psiMajor Diameter 4.639 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
674 psi 741 psi
RPMEccentricity 0.247 Tube ID 5.500 No Load Pressure Loss 142 psiContour Length 245.0 Contour Length 245.0 Speed Range 42-85
675-78356.75" 7:8 Lobes 3.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 4.145 Tube OD 6.75 Rev per Unit Volume 0.14 Rev/GalOverall Length 252.0 Overall Length 260.0 Flow Range 300-600
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
0 100 200 300 400 500 600 700 800 900
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
600 GPM
450 GPM
300 GPM
0
10
20
30
40
50
60
70
80
90
100
0 200 400 600 800 1,000
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
600 GPM
450 GPM
300 GPM
0
50
100
150
200
250
0 100 200 300 400 500 600 700 800 900
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
675-78356.75” 7:8 Lobes 3.5 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 77
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
204 Min 182.5 Alternate Stator OD: 6.50 / 7.00 in.
-0.051
Reline Lengths (in.) Breen: Max 194.1 Min 182 Willis: Max8
4.0607 2-OS 4.068 -0.05965
4.0284.041 -0.0334 OS 2-OS 4.037 -0.029 4.024 -0.016-0.019 4.032 -0.024 4.025 -0.017321
4.0024.014 -0.0060.021 3.978 0.030 3.966 0.042
0 S OS 4.006 0.0023.982 0.026 3.971 0.037 3.987
3.994 0.0140.006 4.001 0.007 4.001 0.007T US S 3.994 0.014
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 12,718 ft-lbs 15,262 ft-lbs 16,788 1,782 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 10,175 ft-lbs
Head Length 7.00 Side 2: 7.3 Max Torque 6,359 ft-lbsWeight 703 Weight 718 Stall Pressure 1,080 psi 1,350 psi
ft-lbs 7,949 ft-lbs 9,539 ft-lbs 10,493 1,620 psi
280XTHead Diameter 4.000 Side 1: 7.3 Max Pressure 675 psi 844 psiMajor Diameter 4.520 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,013 psi 1,114 psi
RPMEccentricity 0.256 Tube ID 5.500 No Load Pressure Loss 144 psiContour Length 181.0 Contour Length 180.0 Speed Range 83-167
675-78506.75" 7:8 Lobes 5 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 4.009 Tube OD 6.75 Rev per Unit Volume 0.28 Rev/GalOverall Length 188.0 Overall Length 194.5 Flow Range 300-600
0
2,000
4,000
6,000
8,000
10,000
12,000
0 200 400 600 800 1,000 1,200 1,400
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
600 GPM
450 GPM
300 GPM
0
20
40
60
80
100
120
140
160
180
0 200 400 600 800 1,000 1,200 1,400
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
600 GPM
450 GPM
300 GPM
0
50
100
150
200
250
300
350
0 200 400 600 800 1,000 1,200 1,400
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
675-78506.75” 7:8 Lobes 5 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 78
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
260 Min 248 Alternate Stator OD: 7 in.Reline Lengths (in.) Breen: Max 260.1 Min 248 Willis: Max87654 OS 4.158 -0.007 4.156 -0.005321
4.1364.146 0.0050 S S 4.143 0.008 4.141 0.0100.015 4.136 0.015 4.137 0.014T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 18,272 ft-lbs 21,927 ft-lbs 24,115 2,138 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 14,618 ft-lbs
Head Length 7.00 Side 2: 8.0 Max Torque 9,136 ft-lbsWeight 920 Weight 964 Stall Pressure 1,296 psi 1,620 psi
ft-lbs 11,420 ft-lbs 13,704 ft-lbs 15,075 1,944 psi
280XTHead Diameter 4.500 Side 1: 8.0 Max Pressure 810 psi 1,013 psiMajor Diameter 4.643 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,215 psi 1,337 psi
RPMEccentricity 0.246 Tube ID 5.500 No Load Pressure Loss 143 psiContour Length 244.8 Contour Length 244.0 Speed Range 70-140
675-78576.75" 7:8 Lobes 5.7 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 4.151 Tube OD 6.75 Rev per Unit Volume 0.23 Rev/GalOverall Length 251.8 Overall Length 260.0 Flow Range 300-600
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
0 200 400 600 800 1,000 1,200 1,400 1,600
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
600 GPM
450 GPM
300 GPM
0
20
40
60
80
100
120
140
160
0 500 1,000 1,500 2,000
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
600 GPM
450 GPM
300 GPM
0
50
100
150
200
250
300
350
400
450
0 200 400 600 800 1,000 1,200 1,400 1,600 1,800
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
675-78576.75” 7:8 Lobes 5.7 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 79
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
245 Min 233 Alternate Stator OD: 6.50 / 7.00 in.
4.048 -0.040 4.034 -0.0264.049 -0.041 4.035
Reline Lengths (in.) Breen: Max - Min - Willis: Max8
-0.0277 2-OS65
4.0144.028 -0.0194 OS 4.008 0.000-0.006 4.012 -0.003321
3.9813.997 0.0110 S 3.976 0.0320.027 3.998 0.010T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 17,159 ft-lbs 20,587 ft-lbs 22,642 2,391 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 13,721 ft-lbs
Head Length 7.00 Side 2: 7.3 Max Torque 8,579 ft-lbsWeight 892 Weight 908 Stall Pressure 1,449 psi 1,812 psi
ft-lbs 10,724 ft-lbs 12,869 ft-lbs 14,156 2,174 psi
280XTHead Diameter 4.000 Side 1: 7.3 Max Pressure 906 psi 1,133 psiMajor Diameter 4.520 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,359 psi 1,495 psi
RPMEccentricity 0.256 Tube ID 5.500 No Load Pressure Loss 143 psiContour Length 231.5 Contour Length 230.5 Speed Range 83-166
675-7864 (A)6.75" 7:8 Lobes 6.4 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 4.009 Tube OD 6.75 Rev per Unit Volume 0.28 Rev/GalOverall Length 238.5 Overall Length 245.0 Flow Range 300-600
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
0 200 400 600 800 1,000 1,200 1,400 1,600 1,800
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
600 GPM
450 GPM
300 GPM
0
20
40
60
80
100
120
140
160
180
0 500 1,000 1,500 2,000
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
600 GPM
450 GPM
300 GPM
0
50
100
150
200
250
300
350
400
450
0 500 1,000 1,500 2,000
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
675-7864 (A)6.75” 7:8 Lobes 6.4 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 80
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
- Min - Alternate Stator OD: 7 in.Reline Lengths (in.) Breen: Max 250.1 Min 238 Willis: Max876543210 S 3.949 -0.009 3.942 -0.002T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 23,937 ft-lbs - - psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 15,951 ft-lbs
Head Length 7.00 Side 2: 8.0 Max Torque 9,975 ft-lbsWeight 782 Weight 932 Stall Pressure 1,532 psi - psi
ft-lbs - ft-lbs 14,962 ft-lbs - 2,299 psi
280XTHead Diameter 4.000 Side 1: 8.0 Max Pressure 958 psi - psiMajor Diameter 4.425 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,437 psi - psi
RPMEccentricity 0.243 Tube ID 5.500 No Load Pressure Loss 157 psiContour Length 225.5 Contour Length 234.0 Speed Range 75-151
675-7864 (B)6.75" 7:8 Lobes 6.4 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 3.940 Tube OD 6.75 Rev per Unit Volume 0.25 Rev/GalOverall Length 232.5 Overall Length 250.0 Flow Range 300-600
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
20,000
0 200 400 600 800 1,000 1,200 1,400 1,600 1,800
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
600 GPM
450 GPM
300 GPM
0
20
40
60
80
100
120
140
160
0 500 1,000 1,500 2,000
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
600 GPM
450 GPM
300 GPM
0
50
100
150
200
250
300
350
400
450
0 200 400 600 800 1,000 1,200 1,400 1,600 1,800
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
675-7864 (B)6.75” 7:8 Lobes 6.4 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 81
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
210 Min 198 Alternate Stator OD: - in.Reline Lengths (in.) Breen: Max - Min - Willis: Max87654321
3.9713.982 0.0020 S 3.966 0.0180.013 3.987 -0.003T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 12,413 ft-lbs 14,892 ft-lbs 16,375 1,182 psi
Thread Form 2 7/8" API IF Material Alloy Steel Stall Torque 9,919 ft-lbs
Head Length 8.00 Side 2: 8.0 Max Torque 6,206 ft-lbsWeight 678 Weight 796 Stall Pressure 716 psi 896 psi
ft-lbs 7,758 ft-lbs 9,309 ft-lbs 10,240 1,075 psi
280XTHead Diameter 4.250 Side 1: 8.0 Max Pressure 448 psi 560 psiMajor Diameter 4.380 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
672 psi 739 psi
RPMEccentricity 0.198 Tube ID 5.500 No Load Pressure Loss 167 psiContour Length 196.8 Contour Length 194.0 Speed Range 45-99
675-910356.75" 9:10 Lobes 3.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 3.984 Tube OD 6.75 Rev per Unit Volume 0.18 Rev/GalOverall Length 204.8 Overall Length 210.0 Flow Range 250-550
0
2,000
4,000
6,000
8,000
10,000
12,000
0 100 200 300 400 500 600 700 800 900
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
550 GPM
400 GPM
250 GPM
0
20
40
60
80
100
120
0 200 400 600 800 1,000
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
550 GPM
400 GPM
250 GPM
0
20
40
60
80
100
120
140
160
180
200
0 100 200 300 400 500 600 700 800 900
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
675-910356.75” 9:10 Lobes 3.5 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 82
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
- Min - Alternate Stator OD: - in.Reline Lengths (in.) Breen: Max 148.9 Min 142 Willis: Max8765432 S 4.058 -0.023 4.060 -0.02510T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 16,559 ft-lbs - - psi
Thread Form 2 7/8" API IF Material Alloy Steel Stall Torque 11,031 ft-lbs
Head Length 5.00 Side 2: 8.0 Max Torque 6,900 ft-lbsWeight 523 Weight 517 Stall Pressure 884 psi - psi
ft-lbs - ft-lbs 10,351 ft-lbs - 1,327 psi
280XTHead Diameter 4.170 Side 1: 8.0 Max Pressure 553 psi - psiMajor Diameter 4.438 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
830 psi - psi
RPMEccentricity 0.201 Tube ID 5.500 No Load Pressure Loss 149 psiContour Length 139.0 Contour Length 132.8 Speed Range 60-120
675-910406.75" 9:10 Lobes 4 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 4.035 Tube OD 6.75 Rev per Unit Volume 0.20 Rev/GalOverall Length 144.0 Overall Length 148.8 Flow Range 300-600
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
0 200 400 600 800 1,000 1,200
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
600 GPM
450 GPM
300 GPM
0
20
40
60
80
100
120
140
0 200 400 600 800 1,000 1,200
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
600 GPM
450 GPM
300 GPM
0
50
100
150
200
250
0 200 400 600 800 1,000 1,200
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
675-910406.75” 9:10 Lobes 4 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 83
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
- Min - Alternate Stator OD: - in.Reline Lengths (in.) Breen: Max 200 Min 186 Willis: Max87
-0.0636
4.1535 1.5-OS 4.153 -0.0634 OS 4.120 -0.030 4.121 -0.0313210 S 4.103 -0.013 4.105 -0.015T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 11,742 ft-lbs - - psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 7,828 ft-lbs
Head Length 7.00 Side 2: 8.0 Max Torque 4,892 ft-lbsWeight 705 Weight 790 Stall Pressure 1,248 psi - psi
ft-lbs - ft-lbs 7,339 ft-lbs - 1,872 psi
280XTHead Diameter 4.380 Side 1: 8.0 Max Pressure 780 psi - psiMajor Diameter 4.606 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,170 psi - psi
RPMEccentricity 0.258 Tube ID 5.750 No Load Pressure Loss 219 psiContour Length 184.0 Contour Length 184.0 Speed Range 126-252
700-78607" 7:8 Lobes 6 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 4.090 Tube OD 7 Rev per Unit Volume 0.42 Rev/GalOverall Length 191.0 Overall Length 200.0 Flow Range 300-600
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
10,000
0 200 400 600 800 1,000 1,200 1,400 1,600
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
600 GPM
450 GPM
300 GPM
0
50
100
150
200
250
300
0 200 400 600 800 1,000 1,200 1,400 1,600
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
600 GPM
450 GPM
300 GPM
0
50
100
150
200
250
300
350
400
0 200 400 600 800 1,000 1,200 1,400 1,600
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
700-78607” 7:8 Lobes 6 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 84
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
246 Min 234 Alternate Stator OD: - in.Reline Lengths (in.) Breen: Max 250 Min 236 Willis: Max87654 OS 4.120 -0.030 4.110 -0.020321
4.0964.105 -0.0150 S OS 4.096 -0.006 4.090 0.000-0.006 4.089 0.001 4.108 -0.018T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 18,695 ft-lbs 22,433 ft-lbs 24,674 2,885 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 14,949 ft-lbs
Head Length 7.00 Side 2: 9.3 Max Torque 9,347 ft-lbsWeight 897 Weight 966 Stall Pressure 1,748 psi 2,186 psi
ft-lbs 11,684 ft-lbs 14,021 ft-lbs 15,424 2,623 psi
280XTHead Diameter 4.380 Side 1: 9.3 Max Pressure 1,093 psi 1,366 psiMajor Diameter 4.606 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,640 psi 1,803 psi
RPMEccentricity 0.258 Tube ID 5.750 No Load Pressure Loss 141 psiContour Length 234.0 Contour Length 227.5 Speed Range 92-184
700-78757" 7:8 Lobes 7.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 4.090 Tube OD 7 Rev per Unit Volume 0.31 Rev/GalOverall Length 241.0 Overall Length 246.0 Flow Range 300-600
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
0 500 1,000 1,500 2,000 2,500
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
0.100
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
600 GPM
450 GPM
300 GPM
0
20
40
60
80
100
120
140
160
180
200
0 500 1,000 1,500 2,000 2,500
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
600 GPM
450 GPM
300 GPM
0
100
200
300
400
500
600
0 500 1,000 1,500 2,000 2,500
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
700-78757” 7:8 Lobes 7.5 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 85
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
178 Min 166 Alternate Stator OD: - in.Reline Lengths (in.) Breen: Max - Min - Willis: Max8765
4.0774.082 -0.0124 OS 4.069 0.001-0.007 4.087 -0.017321
4.0244.050 0.0200 S 4.016 0.0540.046 4.035 0.035T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 10,963 ft-lbs 13,155 ft-lbs 14,467 1,676 psi
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 8,770 ft-lbs
Head Length 7.00 Side 2: 7.5 Max Torque 5,481 ft-lbsWeight 629 Weight 731 Stall Pressure 1,016 psi 1,270 psi
ft-lbs 6,851 ft-lbs 8,222 ft-lbs 9,044 1,524 psi
280XTHead Diameter 4.000 Side 1: 7.5 Max Pressure 635 psi 794 psiMajor Diameter 4.745 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
953 psi 1,048 psi
RPMEccentricity 0.338 Tube ID 6.000 No Load Pressure Loss 121 psiContour Length 164.0 Contour Length 163.0 Speed Range 95-191
725-56507.25" 5:6 Lobes 5 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 4.070 Tube OD 7.25 Rev per Unit Volume 0.32 Rev/GalOverall Length 171.0 Overall Length 178.0 Flow Range 300-600
0
2,000
4,000
6,000
8,000
10,000
12,000
0 200 400 600 800 1,000 1,200
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
600 GPM
450 GPM
300 GPM
0
50
100
150
200
250
0 200 400 600 800 1,000 1,200 1,400
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
600 GPM
450 GPM
300 GPM
0
50
100
150
200
250
300
350
0 200 400 600 800 1,000 1,200 1,400
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
725-56507.25” 5:6 Lobes 5 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 86
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
245 Min 233 Alternate Stator OD: - in.Reline Lengths (in.) Breen: Max - Min - Willis: Max87654321
4.2814.293 0.0320 S 4.275 0.0500.044 4.294 0.031T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 19,517 ft-lbs 23,416 ft-lbs 25,760 2,967 psi
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 15,610 ft-lbs
Head Length 7.64 Side 2: 7.5 Max Torque 9,758 ft-lbsWeight 980 Weight 1069 Stall Pressure 1,798 psi 2,248 psi
ft-lbs 12,198 ft-lbs 14,638 ft-lbs 16,102 2,697 psi
280XTHead Diameter 4.500 Side 1: 7.5 Max Pressure 1,124 psi 1,405 psiMajor Diameter 4.862 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,686 psi 1,855 psi
RPMEccentricity 0.269 Tube ID 5.875 No Load Pressure Loss 138 psiContour Length 231.0 Contour Length 229.0 Speed Range 91-182
725-78777.25" 7:8 Lobes 7.7 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 4.325 Tube OD 7.25 Rev per Unit Volume 0.30 Rev/GalOverall Length 238.6 Overall Length 245.0 Flow Range 300-600
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
20,000
0 500 1,000 1,500 2,000 2,500
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
600 GPM
450 GPM
300 GPM
0
20
40
60
80
100
120
140
160
180
200
0 500 1,000 1,500 2,000 2,500
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
600 GPM
450 GPM
300 GPM
0
100
200
300
400
500
600
0 500 1,000 1,500 2,000 2,500
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
725-78777.25” 7:8 Lobes 7.7 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 87
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
138 Min 126 Alternate Stator OD: 8 in.Reline Lengths (in.) Breen: Max - Min - Willis: Max87654321
4.4004.423 0.0320 S 4.394 0.0610.055 4.424 0.031T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 9,113 ft-lbs 10,930 ft-lbs 12,026 1,251 psi
Thread Form 3 1/2" API Reg Material Alloy Steel Stall Torque 7,287 ft-lbs
Head Length 7.10 Side 2: 8.0 Max Torque 4,556 ft-lbsWeight 608 Weight 696 Stall Pressure 758 psi 948 psi
ft-lbs 5,696 ft-lbs 6,835 ft-lbs 7,518 1,137 psi
280XTHead Diameter 4.500 Side 1: 8.0 Max Pressure 474 psi 593 psiMajor Diameter 5.108 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
711 psi 782 psi
RPMEccentricity 0.327 Tube ID 6.250 No Load Pressure Loss 156 psiContour Length 122.9 Contour Length 122.0 Speed Range 84-252
775-6740 (A)7.75" 6:7 Lobes 4 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 4.455 Tube OD 7.75 Rev per Unit Volume 0.28 Rev/GalOverall Length 130.0 Overall Length 138.0 Flow Range 300-900
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
0 100 200 300 400 500 600 700 800 900
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
900 GPM
600 GPM
300 GPM
0
50
100
150
200
250
300
0 200 400 600 800 1,000
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
900 GPM
600 GPM
300 GPM
0
50
100
150
200
250
300
350
400
0 200 400 600 800 1,000
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
775-6740 (A)7.75” 6:7 Lobes 4 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 88
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
112 Min 100 Alternate Stator OD: 8 in.Reline Lengths (in.) Breen: Max - Min - Willis: Max87654321
4.5534.570 0.0200 S 4.549 0.0410.037 4.562 0.028T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 7,890 ft-lbs 9,459 ft-lbs 10,408 955 psi
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 6,310 ft-lbs
Head Length 6.70 Side 2: 8.0 Max Torque 3,945 ft-lbsWeight 521 Weight 566 Stall Pressure 579 psi 724 psi
ft-lbs 4,931 ft-lbs 5,917 ft-lbs 6,509 868 psi
280XTHead Diameter 4.750 Side 1: 8.0 Max Pressure 362 psi 453 psiMajor Diameter 5.058 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
543 psi 597 psi
RPMEccentricity 0.234 Tube ID 6.250 No Load Pressure Loss 153 psiContour Length 99.3 Contour Length 96.0 Speed Range 69-138
775-910307.75" 9:10 Lobes 3 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 4.590 Tube OD 7.75 Rev per Unit Volume 0.23 Rev/GalOverall Length 106.0 Overall Length 112.0 Flow Range 300-600
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
0 100 200 300 400 500 600 700
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
0.100
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
600 GPM
450 GPM
300 GPM
0
20
40
60
80
100
120
140
160
0 100 200 300 400 500 600 700 800
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
600 GPM
450 GPM
300 GPM
0
20
40
60
80
100
120
140
160
180
0 100 200 300 400 500 600 700 800
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
775-910307.75” 9:10 Lobes 3 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 89
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
228 Min 216 Alternate Stator OD: - in.Reline Lengths (in.) Breen: Max - Min - Willis: Max87654321
4.0014.019 0.0210 S 3.992 0.0480.039 4.017 0.023T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 7,574 ft-lbs 9,084 ft-lbs 9,993 913 psi
Thread Form 3 1/2" API Reg Material Alloy Steel Stall Torque 6,052 ft-lbs
Head Length 13.93 Side 2: 8.5 Max Torque 3,787 ft-lbsWeight 558 Weight 939 Stall Pressure 553 psi 692 psi
ft-lbs 4,733 ft-lbs 5,680 ft-lbs 6,248 830 psi
280XTHead Diameter 4.550 Side 1: 8.5 Max Pressure 346 psi 433 psiMajor Diameter 4.856 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
519 psi 571 psi
RPMEccentricity 0.408 Tube ID 6.140 No Load Pressure Loss 134 psiContour Length 132.1 Contour Length 133.0 Speed Range 77-231
800-45338" 4:5 Lobes 3.3 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 4.040 Tube OD 8 Rev per Unit Volume 0.26 Rev/GalOverall Length 146.0 Overall Length 150.0 Flow Range 300-900
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
0 100 200 300 400 500 600 700
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
900 GPM
600 GPM
300 GPM
0
50
100
150
200
250
0 100 200 300 400 500 600 700
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
900 GPM
600 GPM
300 GPM
0
50
100
150
200
250
300
0 100 200 300 400 500 600 700
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
800-45338” 4:5 Lobes 3.3 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 90
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
168 Min 148 Alternate Stator OD: 7.75 / 8.25 in.Reline Lengths (in.) Breen: Max 168 Min 154 Willis: Max87654321
4.1104.127 -0.0184.079 0.030 4.051 0.058
0 S OS 4.108 0.0014.087 0.022 4.060 0.049
4.096 0.013-0.001 4.104 0.005 4.122 -0.013T S
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 8,679 ft-lbs 10,406 ft-lbs 11,449 1,021 psi
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 6,941 ft-lbs
Head Length 7.00 Side 2: 8.0 Max Torque 4,339 ft-lbsWeight 603 Weight 957 Stall Pressure 619 psi 774 psi
ft-lbs 5,424 ft-lbs 6,509 ft-lbs 7,160 928 psi
280XTHead Diameter 4.750 Side 1: 8.0 Max Pressure 387 psi 484 psiMajor Diameter 4.940 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
581 psi 639 psi
RPMEccentricity 0.415 Tube ID 6.250 No Load Pressure Loss 133 psiContour Length 146.6 Contour Length 144.0 Speed Range 75-226
800-45368" 4:5 Lobes 3.6 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 4.109 Tube OD 8 Rev per Unit Volume 0.25 Rev/GalOverall Length 153.6 Overall Length 160.0 Flow Range 300-900
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
0 100 200 300 400 500 600 700 800
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
900 GPM
600 GPM
300 GPM
0
50
100
150
200
250
0 100 200 300 400 500 600 700 800
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
900 GPM
600 GPM
300 GPM
0
50
100
150
200
250
300
350
0 100 200 300 400 500 600 700 800
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
800-45368” 4:5 Lobes 3.6 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 91
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
228 Min 216 Alternate Stator OD: 7.75 / 8.25 in.
-0.070
Reline Lengths (in.) Breen: Max 228 Min 216 Willis: Max8
4.1797 2-OS 4.179 -0.07065
4.1134.130 -0.0214 OS 4.109 0.000-0.004 4.128 -0.019321
4.070 0.039 4.057 0.0520 S 4.091 0.018
4.081 0.028 4.065 0.0444.087 0.022
T SWillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 14,189 ft-lbs 17,025 ft-lbs 18,729 1,671 psi
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 11,342 ft-lbs
Head Length 7.00 Side 2: 8.0 Max Torque 7,094 ft-lbsWeight 864 Weight 1366 Stall Pressure 1,012 psi 1,266 psi
ft-lbs 8,868 ft-lbs 10,642 ft-lbs 11,706 1,519 psi
280XTHead Diameter 4.750 Side 1: 8.0 Max Pressure 633 psi 791 psiMajor Diameter 4.940 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
950 psi 1,044 psi
RPMEccentricity 0.415 Tube ID 6.250 No Load Pressure Loss 133 psiContour Length 214.0 Contour Length 212.0 Speed Range 75-226
800-45538" 4:5 Lobes 5.3 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 4.109 Tube OD 8 Rev per Unit Volume 0.25 Rev/GalOverall Length 221.0 Overall Length 228.0 Flow Range 300-900
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
0 200 400 600 800 1,000 1,200
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
900 GPM
600 GPM
300 GPM
0
50
100
150
200
250
0 200 400 600 800 1,000 1,200 1,400
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
900 GPM
600 GPM
300 GPM
0
100
200
300
400
500
600
0 200 400 600 800 1,000 1,200 1,400
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
800-45538” 4:5 Lobes 5.3 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 92
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
- Min - Alternate Stator OD: - in.Reline Lengths (in.) Breen: Max 111.6 Min 99.6 Willis: Max876543210 S 4.102 0.000 4.096 0.006T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 9,786 ft-lbs - - psi
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 6,528 ft-lbs
Head Length 7.00 Side 2: 8.0 Max Torque 4,082 ft-lbsWeight 387 Weight 634 Stall Pressure 459 psi - psi
ft-lbs - ft-lbs 6,123 ft-lbs - 688 psi
280XTHead Diameter 4.750 Side 1: 8.0 Max Pressure 287 psi - psiMajor Diameter 4.865 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
431 psi - psi
RPMEccentricity 0.382 Tube ID 6.250 No Load Pressure Loss 196 psiContour Length 98.0 Contour Length 96.6 Speed Range 96-174
800-56308" 5:6 Lobes 3 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 4.102 Tube OD 8 Rev per Unit Volume 0.19 Rev/GalOverall Length 105.0 Overall Length 111.6 Flow Range 500-900
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
0 100 200 300 400 500 600
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
0.100
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
900 GPM
700 GPM
500 GPM
0
20
40
60
80
100
120
140
160
180
200
0 100 200 300 400 500 600
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
900 GPM
700 GPM
500 GPM
0
50
100
150
200
250
0 100 200 300 400 500 600
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
800-56308” 5:6 Lobes 3 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 93
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
- Min - Alternate Stator OD: 7.75 in.Reline Lengths (in.) Breen: Max 168 Min 156 Willis: Max876543210 S 4.102 0.000 4.096 0.006T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 19,217 ft-lbs - - psi
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 12,801 ft-lbs
Head Length 7.00 Side 2: 8.0 Max Torque 8,008 ft-lbsWeight 592 Weight 956 Stall Pressure 900 psi - psi
ft-lbs - ft-lbs 12,012 ft-lbs - 1,351 psi
280XTHead Diameter 4.750 Side 1: 8.0 Max Pressure 563 psi - psiMajor Diameter 4.865 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
845 psi - psi
RPMEccentricity 0.382 Tube ID 6.250 No Load Pressure Loss 196 psiContour Length 155.0 Contour Length 152.0 Speed Range 96-174
800-56508" 5:6 Lobes 5 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 4.102 Tube OD 8 Rev per Unit Volume 0.19 Rev/GalOverall Length 162.0 Overall Length 168.0 Flow Range 500-900
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
0 200 400 600 800 1,000 1,200
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
0.100
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
900 GPM
700 GPM
500 GPM
0
20
40
60
80
100
120
140
160
180
200
0 200 400 600 800 1,000 1,200
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
900 GPM
700 GPM
500 GPM
0
50
100
150
200
250
300
350
400
450
0 200 400 600 800 1,000 1,200
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
800-56508” 5:6 Lobes 5 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 94
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
206 Min 194 Alternate Stator OD: 7.75 in.Reline Lengths (in.) Breen: Max 206.1 Min 191.9 Willis: Max87654 OS 4.317 -0.032 4.318 -0.032321
4.2694.284 0.0020.018
0 S OS 4.290 -0.0054.268
4.265 0.0210.016 4.288 -0.003 4.278 0.008T US 4.268 0.018
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 17,485 ft-lbs 20,972 ft-lbs 23,078 1,304 psi
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 13,981 ft-lbs
Head Length 7.00 Side 2: 8.0 Max Torque 8,742 ft-lbsWeight 989 Weight 1206 Stall Pressure 790 psi 988 psi
ft-lbs 10,928 ft-lbs 13,114 ft-lbs 14,425 1,185 psi
280XTHead Diameter 4.750 Side 1: 8.0 Max Pressure 494 psi 618 psiMajor Diameter 4.958 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
741 psi 815 psi
RPMEccentricity 0.336 Tube ID 6.250 No Load Pressure Loss 140 psiContour Length 192.0 Contour Length 190.0 Speed Range 45-137
800-6740 (B)8" 6:7 Lobes 4 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 4.286 Tube OD 8 Rev per Unit Volume 0.15 Rev/GalOverall Length 199.0 Overall Length 206.0 Flow Range 300-900
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
0 200 400 600 800 1,000
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
900 GPM
600 GPM
300 GPM
0
20
40
60
80
100
120
140
160
0 200 400 600 800 1,000
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
900 GPM
600 GPM
300 GPM
0
50
100
150
200
250
300
350
400
0 200 400 600 800 1,000
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
800-6740 (B)8” 6:7 Lobes 4 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 95
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
- Min - Alternate Stator OD: - in.
-0.074
Reline Lengths (in.) Breen: Max 250.1 Min 236.3 Willis: Max8
4.3597 2-OS 4.359 -0.0746543210 S 4.289 -0.004 4.286 -0.001T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 33,019 ft-lbs - - psi
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 21,996 ft-lbs
Head Length 7.00 Side 2: 8.0 Max Torque 13,760 ft-lbsWeight 971 Weight 1418 Stall Pressure 868 psi - psi
ft-lbs - ft-lbs 20,640 ft-lbs - 1,303 psi
280XTHead Diameter 4.750 Side 1: 8.0 Max Pressure 543 psi - psiMajor Diameter 4.958 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
815 psi - psi
RPMEccentricity 0.336 Tube ID 6.250 No Load Pressure Loss 239 psiContour Length 237.0 Contour Length 234.0 Speed Range 31-95
800-67508" 6:7 Lobes 5 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 4.285 Tube OD 8 Rev per Unit Volume 0.11 Rev/GalOverall Length 244.0 Overall Length 250.0 Flow Range 300-900
0
5,000
10,000
15,000
20,000
25,000
30,000
0 200 400 600 800 1,000 1,200
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0.140
0.160
0.180
0.200
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
900 GPM
600 GPM
300 GPM
0
20
40
60
80
100
120
0 200 400 600 800 1,000 1,200
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
900 GPM
600 GPM
300 GPM
0
50
100
150
200
250
300
350
400
0 200 400 600 800 1,000 1,200
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
800-67508” 6:7 Lobes 5 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 96
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
Min Alternate Stator OD: 7.75 in.Reline Lengths (in.) Breen: Max 168 Min 154 Willis: Max87654 OS 4.376 -0.031 4.376 -0.0313210 S 4.355 -0.010 4.348 -0.003T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 22,811 ft-lbs - - psi
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 15,207 ft-lbs
Head Length 7.00 Side 2: 8.0 Max Torque 9,516 ft-lbsWeight 646 Weight 828 Stall Pressure 326 psi - psi
ft-lbs - ft-lbs 14,274 ft-lbs - 489 psi
280XTHead Diameter 4.750 Side 1: 8.0 Max Pressure 204 psi - psiMajor Diameter 4.918 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
306 psi - psi
RPMEccentricity 0.286 Tube ID 6.250 No Load Pressure Loss 144 psiContour Length 146.6 Contour Length 152.0 Speed Range 16-50
800-78208" 7:8 Lobes 2 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 4.345 Tube OD 8 Rev per Unit Volume 0.06 Rev/GalOverall Length 153.6 Overall Length 168.0 Flow Range 300-900
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
0 50 100 150 200 250 300 350 400
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
900 GPM
600 GPM
300 GPM
0
10
20
30
40
50
60
0 50 100 150 200 250 300 350 400
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
900 GPM
600 GPM
300 GPM
0
20
40
60
80
100
120
140
160
0 50 100 150 200 250 300 350 400
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
800-78208” 7:8 Lobes 2 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 97
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
168 Min 148 Alternate Stator OD: 7.75 / 8.25 in.Reline Lengths (in.) Breen: Max 168 Min 154 Willis: Max87654 OS 4.646 -0.037 4.637 -0.028321
4.5964.609 0.0004.565 0.044 4.552 0.057
0 S OS 4.592 0.0174.574 0.035 4.562 0.047
4.589 0.0200.013 4.587 0.022 4.605 0.004T S
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 10,571 ft-lbs 12,673 ft-lbs 13,950 863 psi
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 8,454 ft-lbs
Head Length 7.00 Side 2: 8.0 Max Torque 5,285 ft-lbsWeight 740 Weight 943 Stall Pressure 523 psi 654 psi
ft-lbs 6,607 ft-lbs 7,928 ft-lbs 8,721 784 psi
280XTHead Diameter 4.750 Side 1: 8.0 Max Pressure 327 psi 409 psiMajor Diameter 5.186 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
491 psi 540 psi
RPMEccentricity 0.288 Tube ID 6.250 No Load Pressure Loss 164 psiContour Length 146.6 Contour Length 144.0 Speed Range 48-146
800-78308" 7:8 Lobes 3 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 4.609 Tube OD 8 Rev per Unit Volume 0.16 Rev/GalOverall Length 153.6 Overall Length 160.0 Flow Range 300-900
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
10,000
0 100 200 300 400 500 600 700
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
0.100
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
900 GPM
600 GPM
300 GPM
0
20
40
60
80
100
120
140
160
0 100 200 300 400 500 600 700
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
900 GPM
600 GPM
300 GPM
0
50
100
150
200
250
0 100 200 300 400 500 600 700
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
800-78308” 7:8 Lobes 3 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 98
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
209 Min 191.2 Alternate Stator OD: 7.75 in.Reline Lengths (in.) Breen: Max 206 Min 194 Willis: Max87654 OS 4.638 -0.029 4.633 -0.0243
4.5974.609 0.0002 0.5-OS OS 4.626 -0.017 4.595 0.0140.012 4.610 -0.001 4.602 0.0071
4.568 0.041 4.554 0.0550 S 4.586 0.023
4.574 0.035 4.562 0.0474.581 0.028
T SWillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 15,386 ft-lbs 18,463 ft-lbs 20,309 1,254 psi
Thread Form 3 1/2" API IF / Reg Material Alloy Steel Stall Torque 12,308 ft-lbs
Head Length 7.00 Side 2: 8.0 Max Torque 7,693 ft-lbsWeight 947 Weight 1200 Stall Pressure 760 psi 950 psi
ft-lbs 9,616 ft-lbs 11,539 ft-lbs 12,693 1,140 psi
280XTHead Diameter 4.750 Side 1: 8.0 Max Pressure 475 psi 594 psiMajor Diameter 5.186 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
713 psi 784 psi
RPMEccentricity 0.288 Tube ID 6.250 No Load Pressure Loss 164 psiContour Length 189.5 Contour Length 187.2 Speed Range 48-146
800-78408" 7:8 Lobes 4 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 4.609 Tube OD 8 Rev per Unit Volume 0.16 Rev/GalOverall Length 196.5 Overall Length 203.2 Flow Range 300-900
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
0 100 200 300 400 500 600 700 800 900
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
0.100
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
900 GPM
600 GPM
300 GPM
0
20
40
60
80
100
120
140
160
0 200 400 600 800 1,000
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
900 GPM
600 GPM
300 GPM
0
50
100
150
200
250
300
350
400
0 200 400 600 800 1,000
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
800-78408” 7:8 Lobes 4 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 99
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
- Min - Alternate Stator OD: - in.Reline Lengths (in.) Breen: Max 270 Min 260 Willis: Max87654321
0.0290 S 4.776 0.010
4.7564.775 0.010
T US 4.756 0.029WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 19,457 ft-lbs - - psi
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 12,971 ft-lbs
Head Length 7.50 Side 2: 8.0 Max Torque 8,121 ft-lbsWeight 1350 Weight 1575 Stall Pressure 230 psi - psi
ft-lbs - ft-lbs 12,182 ft-lbs - 345 psi
280XTHead Diameter 4.850 Side 1: 8.0 Max Pressure 144 psi - psiMajor Diameter 5.265 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
216 psi - psi
RPMEccentricity 0.240 Tube ID 6.250 No Load Pressure Loss 336 psiContour Length 254.5 Contour Length 254.0 Speed Range 13-40
800-910278" 9:10 Lobes 2.7 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 4.786 Tube OD 8 Rev per Unit Volume 0.04 Rev/GalOverall Length 262.0 Overall Length 270.0 Flow Range 300-900
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
0 50 100 150 200 250 300
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
900 GPM
600 GPM
300 GPM
0
5
10
15
20
25
30
35
40
45
0 50 100 150 200 250 300
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
900 GPM
600 GPM
300 GPM
0
10
20
30
40
50
60
70
80
90
100
0 50 100 150 200 250 300
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
800-910278” 9:10 Lobes 2.7 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 100
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
- Min - Alternate Stator OD: - in.Reline Lengths (in.) Breen: Max 208 Min 194 Willis: Max8765432 S 5.295 0.000 5.306 -0.01110T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 11,395 ft-lbs - - psi
Thread Form 4" API FH Material Alloy Steel Stall Torque 7,592 ft-lbs
Head Length 9.00 Side 2: 9.0 Max Torque 4,748 ft-lbsWeight 1321 Weight 1512 Stall Pressure 1,236 psi - psi
ft-lbs - ft-lbs 7,122 ft-lbs - 1,855 psi
280XTHead Diameter 5.500 Side 1: 9.0 Max Pressure 773 psi - psiMajor Diameter 6.268 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,160 psi - psi
RPMEccentricity 0.486 Tube ID 7.880 No Load Pressure Loss 205 psiContour Length 193.0 Contour Length 190.0 Speed Range 287-574
962-23759.62" 2:3 Lobes 7.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 5.295 Tube OD 9.62 Rev per Unit Volume 0.48 Rev/GalOverall Length 202.0 Overall Length 208.0 Flow Range 600-1200
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
0 200 400 600 800 1,000 1,200 1,400 1,600
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
1200 GPM
900 GPM
600 GPM
0
100
200
300
400
500
600
700
0 200 400 600 800 1,000 1,200 1,400 1,600
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
1200 GPM
900 GPM
600 GPM
0
100
200
300
400
500
600
700
800
0 200 400 600 800 1,000 1,200 1,400 1,600
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
962-2375 9.62” 2:3 Lobes 7.5 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 101
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
178 Min 166 Alternate Stator OD: 9.5 in.Reline Lengths (in.) Breen: Max 178 Min 166 Willis: Max8765
4.7974.809 -0.0304 OS 2-OS 4.822 -0.043 4.786 -0.007-0.018 4.822 -0.043 4.822 -0.043321
4.7724.800 -0.0214.770 0.009 4.729 0.050
0 OS4.769 0.010 4.740 0.039
4.761 0.0180.007 4.796 -0.017T S
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 12,214 ft-lbs 14,655 ft-lbs 16,111 1,261 psi
Thread Form 4" API FH Material Alloy Steel Stall Torque 9,761 ft-lbs
Head Length 7.00 Side 2: 10.0 Max Torque 6,107 ft-lbsWeight 874 Weight 1351 Stall Pressure 764 psi 956 psi
ft-lbs 7,634 ft-lbs 9,161 ft-lbs 10,077 1,147 psi
280XTHead Diameter 5.500 Side 1: 10.0 Max Pressure 478 psi 598 psiMajor Diameter 5.978 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
717 psi 789 psi
RPMEccentricity 0.599 Tube ID 7.875 No Load Pressure Loss 145 psiContour Length 160.0 Contour Length 158.0 Speed Range 135-270
962-34459.62" 3:4 Lobes 4.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 4.779 Tube OD 9.62 Rev per Unit Volume 0.23 Rev/GalOverall Length 167.0 Overall Length 178.0 Flow Range 600-1200
0
2,000
4,000
6,000
8,000
10,000
12,000
0 100 200 300 400 500 600 700 800 900
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0.140
0.160
0.180
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
1200 GPM
900 GPM
600 GPM
0
50
100
150
200
250
300
0 200 400 600 800 1,000
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
1200 GPM
900 GPM
600 GPM
0
100
200
300
400
500
600
0 200 400 600 800 1,000
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
962-3445 9.62” 3:4 Lobes 4.5 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 102
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
228 Min 216 Alternate Stator OD: - in.Reline Lengths (in.) Breen: Max 228 Min 214 Willis: Max8765
4.7954.815 -0.0364 OS OS 4.821 -0.042 4.786 -0.007-0.016 4.808 -0.029 4.821 -0.042321
4.7374.758 0.0210 S S 4.766 0.013 4.721 0.0580.042 4.755 0.024 4.757 0.022T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 17,353 ft-lbs 20,813 ft-lbs 22,900 1,800 psi
Thread Form 4" API FH Material Alloy Steel Stall Torque 13,880 ft-lbs
Head Length 7.00 Side 2: 9.0 Max Torque 8,676 ft-lbsWeight 1142 Weight 1754 Stall Pressure 1,091 psi 1,364 psi
ft-lbs 10,845 ft-lbs 13,015 ft-lbs 14,316 1,636 psi
280XTHead Diameter 5.500 Side 1: 9.0 Max Pressure 682 psi 853 psiMajor Diameter 5.978 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,023 psi 1,125 psi
RPMEccentricity 0.599 Tube ID 7.850 No Load Pressure Loss 146 psiContour Length 212.0 Contour Length 210.0 Speed Range 135-271
962-34609.62" 3:4 Lobes 6 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 4.779 Tube OD 9.62 Rev per Unit Volume 0.23 Rev/GalOverall Length 219.0 Overall Length 228.0 Flow Range 600-1200
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
0 200 400 600 800 1,000 1,200 1,400
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0.140
0.160
0.180
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
1200 GPM
900 GPM
600 GPM
0
50
100
150
200
250
300
0 200 400 600 800 1,000 1,200 1,400
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
1200 GPM
900 GPM
600 GPM
0
100
200
300
400
500
600
700
800
0 200 400 600 800 1,000 1,200 1,400
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
962-3460 9.62” 3:4 Lobes 6 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 103
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
154 Min 142 Alternate Stator OD: - in.Reline Lengths (in.) Breen: Max - Min - Willis: Max87654321
5.2785.305 -0.0280 S 5.270 0.007-0.001 5.307 -0.031T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 15,505 ft-lbs 18,597 ft-lbs 20,462 1,800 psi
Thread Form 3 1/2" API FH Material Alloy Steel Stall Torque 12,402 ft-lbs
Head Length 9.19 Side 2: 10.0 Max Torque 7,752 ft-lbsWeight 917 Weight 1142 Stall Pressure 1,091 psi 1,364 psi
ft-lbs 9,691 ft-lbs 11,629 ft-lbs 12,792 1,636 psi
280XTHead Diameter 5.500 Side 1: 10.0 Max Pressure 682 psi 853 psiMajor Diameter 6.341 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,023 psi 1,125 psi
RPMEccentricity 0.532 Tube ID 7.875 No Load Pressure Loss 141 psiContour Length 134.3 Contour Length 134.0 Speed Range 123-272
962-45569.62" 4:5 Lobes 5.6 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 5.277 Tube OD 9.62 Rev per Unit Volume 0.25 Rev/GalOverall Length 143.5 Overall Length 154.0 Flow Range 500-1100
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
0 200 400 600 800 1,000 1,200 1,400
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0.140
0.160
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
1100 GPM
800 GPM
500 GPM
0
50
100
150
200
250
300
0 200 400 600 800 1,000 1,200 1,400
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
1100 GPM
800 GPM
500 GPM
0
100
200
300
400
500
600
700
0 200 400 600 800 1,000 1,200 1,400
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
962-4556 9.62” 4:5 Lobes 5.6 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 104
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
178 Min 166 Alternate Stator OD: 9.50 / 11.25 in.Reline Lengths (in.) Breen: Max 178 Min 164 Willis: Max87654 OS 5.358 -0.017 5.358 -0.017321
5.3315.358 -0.0175.305 0.036 5.277 0.064
0 S OS 5.331 0.0105.309 0.032 5.289 0.052
5.324 0.0170.010 5.324 0.017 5.374 -0.033T S
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 14,658 ft-lbs 17,590 ft-lbs 19,329 778 psi
Thread Form 4" API FH Material Alloy Steel Stall Torque 11,726 ft-lbs
Head Length 8.40 Side 2: 10.0 Max Torque 7,329 ft-lbsWeight 1087 Weight 1328 Stall Pressure 472 psi 590 psi
ft-lbs 9,161 ft-lbs 10,993 ft-lbs 12,093 708 psi
280XTHead Diameter 5.500 Side 1: 10.0 Max Pressure 295 psi 369 psiMajor Diameter 6.236 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
443 psi 487 psi
RPMEccentricity 0.448 Tube ID 7.875 No Load Pressure Loss 159 psiContour Length 158.6 Contour Length 158.0 Speed Range 66-133
962-56309.62" 5:6 Lobes 3 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 5.341 Tube OD 9.62 Rev per Unit Volume 0.11 Rev/GalOverall Length 167.0 Overall Length 178.0 Flow Range 600-1200
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
0 100 200 300 400 500 600
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0.140
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
1200 GPM
900 GPM
600 GPM
0
20
40
60
80
100
120
140
0 100 200 300 400 500 600
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
1200 GPM
900 GPM
600 GPM
0
50
100
150
200
250
300
350
0 100 200 300 400 500 600
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
962-5630 9.62” 5:6 Lobes 3 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 105
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
228 Min 216 Alternate Stator OD: 11.25 in.
5.394 -0.118 5.357 -0.0815.394 -0.118 5.365
Reline Lengths (in.) Breen: Max 228.1 Min 214.1 Willis: Max8
-0.0897 2-OS65
5.3445.360 -0.0844 OS 5.328 -0.052-0.068 5.374 -0.0983
5.2815.304 -0.0282 S 5.271 0.005-0.005 5.306 -0.03010 S 5.263 0.013 5.255 0.021T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 23,694 ft-lbs 28,428 ft-lbs 31,263 1,169 psi
Thread Form 4" API FH Material Alloy Steel Stall Torque 18,934 ft-lbs
Head Length 7.00 Side 2: 9.0 Max Torque 11,847 ft-lbsWeight 1436 Weight 1706 Stall Pressure 708 psi 886 psi
ft-lbs 14,809 ft-lbs 17,771 ft-lbs 19,548 1,063 psi
280XTHead Diameter 5.500 Side 1: 9.0 Max Pressure 443 psi 554 psiMajor Diameter 6.176 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
665 psi 731 psi
RPMEccentricity 0.450 Tube ID 7.875 No Load Pressure Loss 161 psiContour Length 212.5 Contour Length 210.0 Speed Range 61-123
962-56409.62" 5:6 Lobes 4 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 5.276 Tube OD 9.62 Rev per Unit Volume 0.10 Rev/GalOverall Length 219.5 Overall Length 228.0 Flow Range 600-1200
0
5,000
10,000
15,000
20,000
25,000
0 100 200 300 400 500 600 700 800 900
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0.140
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
1200 GPM
900 GPM
600 GPM
0
20
40
60
80
100
120
140
0 200 400 600 800 1,000
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
1200 GPM
900 GPM
600 GPM
0
50
100
150
200
250
300
350
400
450
500
0 100 200 300 400 500 600 700 800 900
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
962-5640 9.62” 5:6 Lobes 4 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 106
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
- Min - Alternate Stator OD: - in.Reline Lengths (in.) Breen: Max 155.5 Min 147.7 Willis: Max876543210 S 5.655 0.004 5.655 0.004T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 12,639 ft-lbs - - psi
Thread Form 4" API FH Material Alloy Steel Stall Torque 8,432 ft-lbs
Head Length 7.00 Side 2: 8.0 Max Torque 5,272 ft-lbsWeight 1034 Weight 1242 Stall Pressure 515 psi - psi
ft-lbs - ft-lbs 7,908 ft-lbs - 772 psi
280XTHead Diameter 5.500 Side 1: 8.0 Max Pressure 322 psi - psiMajor Diameter 6.466 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
483 psi - psi
RPMEccentricity 0.404 Tube ID 7.880 No Load Pressure Loss 213 psiContour Length 141.0 Contour Length 139.5 Speed Range 98-197
962-67309.62" 6:7 Lobes 3 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 5.659 Tube OD 9.62 Rev per Unit Volume 0.16 Rev/GalOverall Length 148.0 Overall Length 155.5 Flow Range 600-1200
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
10,000
0 100 200 300 400 500 600
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.010
0.020
0.030
0.040
0.050
0.060
0.070
0.080
0.090
0.100
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
1200 GPM
900 GPM
600 GPM
0
50
100
150
200
250
0 100 200 300 400 500 600
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
1200 GPM
900 GPM
600 GPM
0
50
100
150
200
250
300
350
0 100 200 300 400 500 600
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
962-6730 9.62” 6:7 Lobes 3 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 107
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
218 Min 206 Alternate Stator OD: 11.25 in.Reline Lengths (in.) Breen: Max 208 Min 194 Willis: Max87654 OS 5.580 -0.032 5.575 -0.027321
5.5245.543 0.0050 S S 5.552 -0.004 5.514 0.0340.024 5.544 0.004 5.544 0.004T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 28,503 ft-lbs 34,204 ft-lbs 37,624 1,782 psi
Thread Form 4" API FH Material Alloy Steel Stall Torque 22,802 ft-lbs
Head Length 7.00 Side 2: 8.0 Max Torque 14,251 ft-lbsWeight 1369 Weight 1642 Stall Pressure 1,080 psi 1,350 psi
ft-lbs 17,814 ft-lbs 21,377 ft-lbs 23,515 1,620 psi
280XTHead Diameter 5.750 Side 1: 8.0 Max Pressure 675 psi 844 psiMajor Diameter 6.403 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,013 psi 1,114 psi
RPMEccentricity 0.428 Tube ID 7.852 No Load Pressure Loss 160 psiContour Length 195.0 Contour Length 202.0 Speed Range 76-153
962-67509.62" 6:7 Lobes 5 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 5.548 Tube OD 9.62 Rev per Unit Volume 0.13 Rev/GalOverall Length 202.0 Overall Length 218.0 Flow Range 600-1200
0
5,000
10,000
15,000
20,000
25,000
30,000
0 200 400 600 800 1,000 1,200 1,400
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0.140
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
1200 GPM
900 GPM
600 GPM
0
20
40
60
80
100
120
140
160
180
0 200 400 600 800 1,000 1,200 1,400
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
1200 GPM
900 GPM
600 GPM
0
100
200
300
400
500
600
700
0 200 400 600 800 1,000 1,200 1,400
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
962-6750 9.62” 6:7 Lobes 5 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 108
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
- Min - Alternate Stator OD: 11.25 in.Reline Lengths (in.) Breen: Max 250 Min 236 Willis: Max87654 OS 5.592 -0.044 5.592 -0.0443210 S 5.548 0.000 5.539 0.009T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 28,121 ft-lbs - - psi
Thread Form 4" API FH Material Alloy Steel Stall Torque 18,747 ft-lbs
Head Length 7.00 Side 2: 9.0 Max Torque 11,721 ft-lbsWeight 1612 Weight 2030 Stall Pressure 1,134 psi - psi
ft-lbs - ft-lbs 17,581 ft-lbs - 1,701 psi
280XTHead Diameter 5.500 Side 1: 9.0 Max Pressure 709 psi - psiMajor Diameter 6.403 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,064 psi - psi
RPMEccentricity 0.428 Tube ID 7.880 No Load Pressure Loss 249 psiContour Length 233.0 Contour Length 232.0 Speed Range 97-195
962-67609.62" 6:7 Lobes 6 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 5.548 Tube OD 9.62 Rev per Unit Volume 0.16 Rev/GalOverall Length 240.0 Overall Length 250.0 Flow Range 600-1200
0
5,000
10,000
15,000
20,000
25,000
0 200 400 600 800 1,000 1,200 1,400
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
1200 GPM
900 GPM
600 GPM
0
50
100
150
200
250
0 200 400 600 800 1,000 1,200 1,400
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
1200 GPM
900 GPM
600 GPM
0
100
200
300
400
500
600
700
0 200 400 600 800 1,000 1,200 1,400
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
962-6760 9.62” 6:7 Lobes 6 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 109
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
246.5 Min 234.5 Alternate Stator OD: 11.25 in.Reline Lengths (in.) Breen: Max - Min - Willis: Max8765
5.6415.658 0.0334 OS 5.639 0.0520.050 5.656 0.035321
5.6195.636 0.0550 S 5.610 0.0810.072 5.635 0.056T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 27,302 ft-lbs 32,753 ft-lbs 36,024 1,586 psi
Thread Form 4" API FH Material Alloy Steel Stall Torque 21,828 ft-lbs
Head Length 7.93 Side 2: 10.0 Max Torque 13,651 ft-lbsWeight 1662 Weight 1853 Stall Pressure 961 psi 1,202 psi
ft-lbs 17,063 ft-lbs 20,476 ft-lbs 22,524 1,442 psi
280XTHead Diameter 6.000 Side 1: 10.0 Max Pressure 601 psi 751 psiMajor Diameter 6.397 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
902 psi 992 psi
RPMEccentricity 0.353 Tube ID 7.852 No Load Pressure Loss 194 psiContour Length 225.6 Contour Length 226.5 Speed Range 69-139
962-7848 (B)9.62" 7:8 Lobes 4.8 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 5.692 Tube OD 9.62 Rev per Unit Volume 0.12 Rev/GalOverall Length 233.5 Overall Length 246.5 Flow Range 600-1200
0
5,000
10,000
15,000
20,000
25,000
30,000
0 200 400 600 800 1,000 1,200
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0.140
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
1200 GPM
900 GPM
600 GPM
0
20
40
60
80
100
120
140
160
0 200 400 600 800 1,000 1,200 1,400
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
1200 GPM
900 GPM
600 GPM
0
100
200
300
400
500
600
0 200 400 600 800 1,000 1,200 1,400
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
962-7848 (B) 9.62” 7:8 Lobes 4.5 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 110
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
240 Min 228 Alternate Stator OD: 11.25 in.Reline Lengths (in.) Breen: Max - Min - Willis: Max87654321
5.6405.656 0.0090 S 5.633 0.0320.025 5.656 0.009T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 31,103 ft-lbs 37,315 ft-lbs 41,056 1,943 psi
Thread Form 4" API FH Material Alloy Steel Stall Torque 24,870 ft-lbs
Head Length 8.88 Side 2: 10.0 Max Torque 15,551 ft-lbsWeight 1656 Weight 1800 Stall Pressure 1,177 psi 1,472 psi
ft-lbs 19,439 ft-lbs 23,327 ft-lbs 25,660 1,766 psi
280XTHead Diameter 5.500 Side 1: 10.0 Max Pressure 736 psi 920 psiMajor Diameter 6.373 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,104 psi 1,214 psi
RPMEccentricity 0.354 Tube ID 7.852 No Load Pressure Loss 177 psiContour Length 222.0 Contour Length 220.0 Speed Range 74-149
962-78579.62" 7:8 Lobes 5.7 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 5.665 Tube OD 9.62 Rev per Unit Volume 0.12 Rev/GalOverall Length 230.9 Overall Length 240.0 Flow Range 600-1200
0
5,000
10,000
15,000
20,000
25,000
30,000
0 200 400 600 800 1,000 1,200 1,400
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.020
0.040
0.060
0.080
0.100
0.120
0.140
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
1200 GPM
900 GPM
600 GPM
0
20
40
60
80
100
120
140
160
0 200 400 600 800 1,000 1,200 1,400 1,600
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
1200 GPM
900 GPM
600 GPM
0
100
200
300
400
500
600
700
800
0 200 400 600 800 1,000 1,200 1,400 1,600
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
962-7857 9.62” 7:8 Lobes 5.7 Stages
at 70o F
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 111
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
201 Min 189 Alternate Stator OD: 11.5 in.Reline Lengths (in.) Breen: Max - Min - Willis: Max87654321
5.4895.517 0.0560 S 5.468 0.1060.085 5.525 0.048T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs 15,885 ft-lbs 19,057 ft-lbs 20,951 852 psi
Thread Form 4 1/2" API Reg Material Alloy Steel Stall Torque 12,688 ft-lbs
Head Length 9.90 Side 2: 10.5 Max Torque 7,942 ft-lbsWeight 1374 Weight 2056 Stall Pressure 516 psi 646 psi
ft-lbs 9,928 ft-lbs 11,914 ft-lbs 13,105 775 psi
280XTHead Diameter 6.500 Side 1: 10.5 Max Pressure 323 psi 404 psiMajor Diameter 6.968 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
485 psi 533 psi
RPMEccentricity 0.697 Tube ID 9.250 No Load Pressure Loss 173 psiContour Length 182.6 Contour Length 180.0 Speed Range 117-175
1125-343611.25" 3:4 Lobes 3.6 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 5.574 Tube OD 11.25 Rev per Unit Volume 0.12 Rev/GalOverall Length 192.5 Overall Length 201.0 Flow Range 1000-1500
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
0 100 200 300 400 500 600
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.050
0.100
0.150
0.200
0.250
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
1500 GPM
1250 GPM
1000 GPM
0
20
40
60
80
100
120
140
160
180
200
0 100 200 300 400 500 600 700
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
1500 GPM
1250 GPM
1000 GPM
0
50
100
150
200
250
300
350
400
450
0 100 200 300 400 500 600 700
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
1125-3436 11.25” 3:4 Lobes 3.6 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 112
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
- Min - Alternate Stator OD: - in.Reline Lengths (in.) Breen: Max 250 Min 238 Willis: Max876543210 S 6.689 0.020 6.685 0.024T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 28,469 ft-lbs - - psi
Thread Form 62C0013 Material Alloy Steel Stall Torque 18,979 ft-lbs
Head Length 10.00 Side 2: 10.5 Max Torque 11,862 ft-lbsWeight 2386 Weight 2468 Stall Pressure 440 psi - psi
ft-lbs - ft-lbs 17,793 ft-lbs - 660 psi
280XTHead Diameter 6.500 Side 1: 10.5 Max Pressure 275 psi - psiMajor Diameter 7.683 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
413 psi - psi
RPMEccentricity 0.487 Tube ID 9.250 No Load Pressure Loss 619 psiContour Length 230.0 Contour Length 229.0 Speed Range 56-112
1125-675511.25" 6:7 Lobes 5.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 6.709 Tube OD 11.25 Rev per Unit Volume 0.06 Rev/GalOverall Length 240.0 Overall Length 250.0 Flow Range 900-1800
0
5,000
10,000
15,000
20,000
25,000
0 100 200 300 400 500 600
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.050
0.100
0.150
0.200
0.250
0.300
0.350
0.400
0.450
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
1800 GPM
1350 GPM
900 GPM
0
20
40
60
80
100
120
0 100 200 300 400 500 600
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
1800 GPM
1350 GPM
900 GPM
0
50
100
150
200
250
300
350
400
0 100 200 300 400 500 600
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
1125-3436 11.25” 6:7 Lobes 5.5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 113
in. in.in. in.in. in.in. in.in.in. in.in. in.lbs lbs
2/24/2015
Power Section Specification (Imperial Units)
- Min - Alternate Stator OD: - in.Reline Lengths (in.) Breen: Max 250 Min 238 Willis: Max876543210 S 6.589 0.010 6.587 0.012T
WillisWillis Fit Breen Fit Willis FitSize Breen Willis Breen Fit Willis FitFit Breen Fit Willis Fit
Stator Minors and Fit (in.)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
ft-lbs - ft-lbs 6,676 ft-lbs - - psi
Thread Form 62C0013 Material Alloy Steel Stall Torque 4,421 ft-lbs
Head Length 9.53 Side 2: 10.5 Max Torque 2,785 ft-lbsWeight 2243 Weight 2517 Stall Pressure 100 psi - psi
ft-lbs - ft-lbs 4,178 ft-lbs - 151 psi
280XTHead Diameter 6.500 Side 1: 10.5 Max Pressure 63 psi - psiMajor Diameter 7.612 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
95 psi - psi
RPMEccentricity 0.506 Tube ID 9.250 No Load Pressure Loss 834 psiContour Length 232.5 Contour Length 229.0 Speed Range 60-109
1125-675611.25" 6:7 Lobes 5.6 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPMAvg. Diameter 6.599 Tube OD 11.25 Rev per Unit Volume 0.06 Rev/GalOverall Length 242.0 Overall Length 250.0 Flow Range 1000-1800
0
1,000
2,000
3,000
4,000
5,000
6,000
0 20 40 60 80 100 120
To
rqu
e (f
t-lb
s)
Torque
Differential Pressure (psi)
0.000
0.050
0.100
0.150
0.200
0.250
0.300
0.350
0.400
0.450
0 50 100 150 200 250
Fit
In
cre
ase (i
n)
Fit Increase
Change in Temperature (degF)
1800 GPM
1400 GPM
1000 GPM
0
20
40
60
80
100
120
0 20 40 60 80 100 120
Sp
eed
(rpm
)
Speed
Differential Pressure (psi)
1800 GPM
1400 GPM
1000 GPM
0
10
20
30
40
50
60
70
80
90
0 20 40 60 80 100 120
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
at 70o F
1125-6756 11.25” 6:7 Lobes 5.6 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 114
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 475-23804.75" 2:3 Lobes 8 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 57.33 Tube OD 120.7 Rev per Unit Volume 0.66 Rev/LOverall Length 6172 Overall Length 6477 Flow Range 379-984
RPMEccentricity 6.11 Tube ID 95.25 No Load Pressure Loss 707 kPaContour Length 6020 Contour Length 6071 Speed Range 248-646
280XTHead Diameter 69.85 Side 1: 203.2 Max Pressure 6,640 kPa 8,300 kPaMajor Diameter 69.55 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
9,960 kPa 10,956 kPaHead Length 152.4 Side 2: 203.2 Max Torque 1,543 N-mWeight 79 Weight 252 Stall Pressure 10,624 kPa 13,280 kPa
N-m 1,929 N-m 2,315 N-m 2,547 15,936 kPa 17,529 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 2,470 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 3,087 N-m 3,705 N-m 4,075
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0T
2 S 58.22 -0.89 58.14 -0.821
4 OS 58.17 -0.84 58.24 -0.923
6 2-OS 59.26 -1.93 59.26 -1.935
87
Reline Lengths (mm) Breen: Max 6477 Min 6121 Willis: Max
2/24/2015
- Min - Alternate Stator OD: 127.0 mm
0
500
1,000
1,500
2,000
2,500
3,000
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
1.800
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
984 LPM
681 LPM
379 LPM
0
100
200
300
400
500
600
700
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
984 LPM
681 LPM
379 LPM
0
20
40
60
80
100
120
140
160
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
475-2380 4.75” 2:3 Lobes 8 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 115
mm mm
mm mm
mm mm
mm mm
mm
mm mm
mm mm
kg kg
Power Section Specification (Metric Units) 475-45114.75" 4:5 Lobes 1.1 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPM
Avg. Diameter 61.47 Tube OD 120.7 Rev per Unit Volume 0.27 Rev/L
Overall Length 1006 Overall Length 1041 Flow Range 379-1041
RPM
Eccentricity 6.25 Tube ID 95.3 No Load Pressure Loss 594 kPa
Contour Length 848 Contour Length 826 Speed Range 102-281
280XTHead Diameter 69.85 Side 1: 108.0 Max Pressure 538 kPa 673 kPaMajor Diameter 73.96 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
807 kPa 888 kPaHead Length 158.5 Side 2: 108.0 Max Torque 291 N-mWeight 25 Weight 38 Stall Pressure 860 kPa 1,076 kPa
N-m 364 N-m 437 N-m 481 1,291 kPa 1,420 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 466 N-m
Fit Details (mm)
Nomenclature UF100D-UF180 UF114 POB-PRR 280XT
N-m 583 N-m 699 N-m 769
Size Breen Willis Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S
RR
61.65 -0.178
T
2
1
4 OS 62.31 -0.838 62.23 -0.762
3
6
5
8
7
Reline Lengths (mm) Breen: Max 1016 Min 965 Willis: Max
12/17/2014
- Min - Alternate Stator OD: 127.0 mm
0
100
200
300
400
500
600
0 200 400 600 800 1,000 1,200
Torque (N-m) versus Differential Pressure
DIFFERENTIAL PRESSURE (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
3.000
3.500
4.000
4.500
0 20 40 60 80 100 120 140
Fit Increase (mm) versus Change in Temperature
Change in Temperature (degC)
1041 LPM
700 LPM
379 LPM
0
50
100
150
200
250
300
0 200 400 600 800 1,000 1,200
RPM (Rev/Min) versus Differential Pressure
DIFFERENTIAL PRESSURE (kPa)
1041 LPM
700 LPM
379 LPM
0
2
4
6
8
10
12
14
16
18
0 200 400 600 800 1,000 1,200
Mechanical Horsepower (HP) versus Differential Pressure
DIFFERENTIAL PRESSURE (kPa)
61.62 -0.152
Willis Fit
at 21o C
475-4511 4.75” 4:5 Lobes 1.1 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 116
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 475-45354.75" 4:5 Lobes 3.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 61.47 Tube OD 120.7 Rev per Unit Volume 0.27 Rev/LOverall Length 2718 Overall Length 2946 Flow Range 379-1041
RPMEccentricity 6.25 Tube ID 95.25 No Load Pressure Loss 715 kPaContour Length 2565 Contour Length 2540 Speed Range 102-282
280XTHead Diameter 69.85 Side 1: 203.2 Max Pressure 2,779 kPa 3,474 kPaMajor Diameter 73.96 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
4,169 kPa 4,585 kPaHead Length 152.4 Side 2: 203.2 Max Torque 1,499 N-mWeight 67 Weight 108 Stall Pressure 4,446 kPa 5,558 kPa
N-m 1,874 N-m 2,249 N-m 2,474 6,669 kPa 7,336 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 2,399 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 2,999 N-m 3,599 N-m 3,959
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitS
WillisWillis Fit Breen Fit Willis Fit60.93 0.53 60.60 0.86
0 S OS 61.60 -0.1361.06 0.41 60.71 0.76
61.34 0.130.08 61.65 -0.18 61.60 -0.13T
61.3961.77 -0.30
21
43
65
-1.27 63.02 -1.55 62.89 -1.428
63.27 -1.80 63.04 -1.57 62.747 2-OS 3-OS 62.74 -1.27
Reline Lengths (mm) Breen: Max 3099 Min 2743 Willis: Max
2/24/2015
3099 Min 2642 Alternate Stator OD: 127.0 mm
0
500
1,000
1,500
2,000
2,500
3,000
0 1,000 2,000 3,000 4,000 5,000 6,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
1.800
2.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1041 LPM
700 LPM
379 LPM
0
50
100
150
200
250
300
0 1,000 2,000 3,000 4,000 5,000 6,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1041 LPM
700 LPM
379 LPM
0
10
20
30
40
50
60
70
80
0 1,000 2,000 3,000 4,000 5,000 6,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
475-4535 4.75” 4:5 Lobes 3.5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 117
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 475-45604.75" 4:5 Lobes 6 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 61.47 Tube OD 120.7 Rev per Unit Volume 0.27 Rev/LOverall Length 4547 Overall Length 4750 Flow Range 379-1041
RPMEccentricity 6.25 Tube ID 95.25 No Load Pressure Loss 597 kPaContour Length 4394 Contour Length 4343 Speed Range 102-282
280XTHead Diameter 69.85 Side 1: 203.2 Max Pressure 5,378 kPa 6,723 kPaMajor Diameter 73.96 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
8,067 kPa 8,874 kPaHead Length 152.4 Side 2: 203.2 Max Torque 2,897 N-mWeight 111 Weight 175 Stall Pressure 8,604 kPa 10,756 kPa
N-m 3,622 N-m 4,346 N-m 4,781 12,907 kPa 14,197 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 4,636 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 5,795 N-m 6,954 N-m 7,649
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitS
WillisWillis Fit Breen Fit Willis Fit60.93 0.53 60.55 0.91
0 S OS 61.87 -0.4161.04 0.43 60.73 0.74
61.24 0.230.08 61.80 -0.33 61.60 -0.13T
61.3961.65 -0.18
21
4 OS 62.05 -0.58 62.05 -0.583
65
-1.14 62.28 -0.81 62.10 -0.638
62.46 -0.99 62.23 -0.76 62.617 2-OS 2-OS 62.66 -1.19
Reline Lengths (mm) Breen: Max 4750 Min 4394 Willis: Max
2/24/2015
4750 Min 4445 Alternate Stator OD: 127.0 mm
0
1,000
2,000
3,000
4,000
5,000
6,000
0 2,000 4,000 6,000 8,000 10,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
1.800
2.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1041 LPM
700 LPM
379 LPM
0
50
100
150
200
250
300
0 2,000 4,000 6,000 8,000 10,000 12,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1041 LPM
700 LPM
379 LPM
0
20
40
60
80
100
120
140
160
0 2,000 4,000 6,000 8,000 10,000 12,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
475-4560 4.75” 4:5 Lobes 6 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 118
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 475-45634.75" 4:5 Lobes 6.3 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 61.47 Tube OD 120.7 Rev per Unit Volume 0.27 Rev/LOverall Length 4775 Overall Length 5274 Flow Range 379-1041
RPMEccentricity 6.25 Tube ID 95.25 No Load Pressure Loss 599 kPaContour Length 4623 Contour Length 4572 Speed Range 103-284
280XTHead Diameter 69.85 Side 1: 279.4 Max Pressure 5,688 kPa 7,110 kPaMajor Diameter 73.96 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
8,532 kPa 9,385 kPaHead Length 152.4 Side 2: 422.1 Max Torque 3,048 N-mWeight 117 Weight 193 Stall Pressure 9,100 kPa 11,376 kPa
N-m 3,811 N-m 4,573 N-m 5,030 13,651 kPa 15,016 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 4,877 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 6,097 N-m 7,317 N-m 8,049
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitS
WillisWillis Fit Breen Fit Willis Fit60.76 0.71 60.43 1.04
0 S OS 61.77 -0.3060.81 0.66 60.48 0.99
61.21 0.250.10 61.70 -0.23 61.37 0.10T
61.3761.60 -0.13
21
4 OS 2-OS 62.23 -0.76 61.90 -0.43-0.63 62.15 -0.69 62.18 -0.713
62.1062.41 -0.94
65
-1.02 62.99 -1.52 62.89 -1.428
63.30 -1.83 62.94 -1.47 62.487 2-OS 3-OS 62.64 -1.17
Reline Lengths (mm) Breen: Max 5258 Min 4902 Willis: Max
2/24/2015
5273 Min 4968 Alternate Stator OD: 127.0 mm
0
1,000
2,000
3,000
4,000
5,000
6,000
0 2,000 4,000 6,000 8,000 10,000 12,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
1.800
2.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1041 LPM
700 LPM
379 LPM
0
50
100
150
200
250
300
0 2,000 4,000 6,000 8,000 10,000 12,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1041 LPM
700 LPM
379 LPM
0
20
40
60
80
100
120
140
160
0 2,000 4,000 6,000 8,000 10,000 12,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
475-4563 4.75” 4:5 Lobes 6.3 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 119
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 475-56304.75" 5:6 Lobes 3 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 66.34 Tube OD 120.7 Rev per Unit Volume 0.32 Rev/LOverall Length 2146 Overall Length 2326 Flow Range 379-1041
RPMEccentricity 4.98 Tube ID 95.25 No Load Pressure Loss 740 kPaContour Length 1994 Contour Length 1920 Speed Range 121-334
280XTHead Diameter 69.85 Side 1: 203.2 Max Pressure 2,379 kPa 2,974 kPaMajor Diameter 76.30 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
3,569 kPa 3,925 kPaHead Length 152.4 Side 2: 203.2 Max Torque 1,061 N-mWeight 48 Weight 86 Stall Pressure 3,806 kPa 4,758 kPa
N-m 1,327 N-m 1,592 N-m 1,751 5,709 kPa 6,280 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 1,698 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 2,123 N-m 2,547 N-m 2,802
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 65.51 0.840.71 65.79 0.56T
65.6366.09 0.25
21
43
65
87
Reline Lengths (mm) Breen: Max - Min - Willis: Max
2/24/2015
2327 Min 2022 Alternate Stator OD: 127.0 mm
0
200
400
600
800
1,000
1,200
1,400
1,600
1,800
2,000
0 1,000 2,000 3,000 4,000 5,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
1.800
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1041 LPM
700 LPM
379 LPM
0
50
100
150
200
250
300
350
400
0 1,000 2,000 3,000 4,000 5,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1041 LPM
700 LPM
379 LPM
0
10
20
30
40
50
60
70
0 1,000 2,000 3,000 4,000 5,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
475-5630 4.75” 5:6 Lobes 3 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 120
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 475-56454.75" 5:6 Lobes 4.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 63.60 Tube OD 120.7 Rev per Unit Volume 0.46 Rev/LOverall Length 2718 Overall Length 3099 Flow Range 379-757
RPMEccentricity 4.11 Tube ID 95.25 No Load Pressure Loss 762 kPaContour Length 2565 Contour Length 2692 Speed Range 173-346
280XTHead Diameter 69.85 Side 1: 203.2 Max Pressure 4,178 kPa 5,223 kPaMajor Diameter 71.83 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
6,267 kPa 6,894 kPaHead Length 152.4 Side 2: 203.2 Max Torque 1,308 N-mWeight 53 Weight 117 Stall Pressure 6,684 kPa 8,356 kPa
N-m 1,635 N-m 1,962 N-m 2,158 10,027 kPa 11,029 kPa
Thread Form 62C0001 Material Alloy Steel Stall Torque 2,093 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 2,616 N-m 3,140 N-m 3,453
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 63.78 -0.18 63.78 -0.18T
21
43
65
87
Reline Lengths (mm) Breen: Max 3099 Min 2794 Willis: Max
2/24/2015
- Min - Alternate Stator OD: 127.0 mm
0
500
1,000
1,500
2,000
2,500
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
757 LPM
568 LPM
379 LPM
0
50
100
150
200
250
300
350
400
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
757 LPM
568 LPM
379 LPM
0
10
20
30
40
50
60
70
80
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
475-5645 4.75” 5:6 Lobes 4.5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 121
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 475-56604.75" 5:6 Lobes 6 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 64.32 Tube OD 120.7 Rev per Unit Volume 0.21 Rev/LOverall Length 4521 Overall Length 4750 Flow Range 379-946
RPMEccentricity 5.36 Tube ID 95.25 No Load Pressure Loss 615 kPaContour Length 4369 Contour Length 4343 Speed Range 79-199
280XTHead Diameter 69.85 Side 1: 203.2 Max Pressure 5,219 kPa 6,524 kPaMajor Diameter 75.04 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
7,829 kPa 8,611 kPaHead Length 152.4 Side 2: 203.2 Max Torque 3,538 N-mWeight 118 Weight 175 Stall Pressure 8,350 kPa 10,438 kPa
N-m 4,423 N-m 5,308 N-m 5,839 12,525 kPa 13,778 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 5,661 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 7,077 N-m 8,492 N-m 9,342
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0T
21
43
65
-1.148
65.467 2-OS 65.46 -1.14
Reline Lengths (mm) Breen: Max 4750 Min 4445 Willis: Max
2/24/2015
- Min - Alternate Stator OD: 127.0 mm
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
0 2,000 4,000 6,000 8,000 10,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
946 LPM
662 LPM
379 LPM
0
50
100
150
200
250
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
946 LPM
662 LPM
379 LPM
0
20
40
60
80
100
120
0 2,000 4,000 6,000 8,000 10,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
475-5660 4.75” 5:6 Lobes 6 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 122
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 475-56834.75" 5:6 Lobes 8.3 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 63.56 Tube OD 120.7 Rev per Unit Volume 0.25 Rev/LOverall Length 5827 Overall Length 6162 Flow Range 379-1041
RPMEccentricity 5.25 Tube ID 95.25 No Load Pressure Loss 654 kPaContour Length 5643 Contour Length 5679 Speed Range 95-262
280XTHead Diameter 79.38 Side 1: 203.2 Max Pressure 7,867 kPa 9,834 kPaMajor Diameter 74.07 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
11,801 kPa 12,981 kPaHead Length 184.2 Side 2: 279.4 Max Torque 4,467 N-mWeight 147 Weight 227 Stall Pressure 12,587 kPa 15,734 kPa
N-m 5,584 N-m 6,701 N-m 7,371 18,880 kPa 20,768 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 7,147 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 8,934 N-m 10,721 N-m 11,793
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitS
WillisWillis Fit Breen Fit Willis Fit62.81 0.75 62.59 0.98
0 S 63.65 -0.0962.89 0.67 62.71 0.85
63.55 0.01T
2 OS 63.32 0.240.17 63.50 0.061
63.4063.65 -0.09
4 OS 1.5-OS 64.14 -0.57 63.86 -0.29-0.32 64.08 -0.52 63.98 -0.423
63.8864.16 -0.60
6 2-OS 64.14 -0.57-0.70 64.49 -0.935
64.2664.54 -0.98-1.23 64.87 -1.31 64.62 -1.05
8 3-OS64.97 -1.41 64.59 -1.03 64.807 2-OS 2.5-OS 64.92 -1.36
Reline Lengths (mm) Breen: Max 6162 Min 5857 Willis: Max65.0765.43 -1.87
2/24/2015
6162 Min 5857 Alternate Stator OD: 127.0 mm65.05 -1.49-1.51 65.53 -1.97
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
1.800
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1041 LPM
700 LPM
379 LPM
0
50
100
150
200
250
300
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1041 LPM
700 LPM
379 LPM
0
50
100
150
200
250
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
475-5683 4.75” 5:6 Lobes 8.3 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 123
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 475-7820 (A)4.75" 7:8 Lobes 2 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 62.82 Tube OD 120.7 Rev per Unit Volume 0.08 Rev/LOverall Length 4382 Overall Length 4572 Flow Range 379-946
RPMEccentricity 4.13 Tube ID 95.25 No Load Pressure Loss 793 kPaContour Length 4229 Contour Length 4166 Speed Range 29-74
280XTHead Diameter 71.75 Side 1: 203.2 Max Pressure 1,462 kPa 1,828 kPaMajor Diameter 71.08 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
2,193 kPa 2,412 kPaHead Length 152.4 Side 2: 203.2 Max Torque 2,530 N-mWeight 106 Weight 170 Stall Pressure 2,339 kPa 2,924 kPa
N-m 3,163 N-m 3,795 N-m 4,175 3,508 kPa 3,859 kPa
Thread Form 62C0001 Material Alloy Steel Stall Torque 4,048 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 5,061 N-m 6,071 N-m 6,679
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 63.50 -0.69 63.40 -0.58T
21
43
65
87
Reline Lengths (mm) Breen: Max 4572 Min 4216 Willis: Max
2/24/2015
Min Alternate Stator OD: 127.0 mm
0
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
4,500
5,000
0 500 1,000 1,500 2,000 2,500 3,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
946 LPM
662 LPM
379 LPM
0
10
20
30
40
50
60
70
80
0 500 1,000 1,500 2,000 2,500 3,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
946 LPM
662 LPM
379 LPM
0
5
10
15
20
25
30
35
0 500 1,000 1,500 2,000 2,500 3,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
475-7820 (A) 4.75” 7:8 Lobes 2 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 124
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 475-7820 (B)4.75" 7:8 Lobes 2 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 68.28 Tube OD 120.7 Rev per Unit Volume 0.09 Rev/LOverall Length 3785 Overall Length 4013 Flow Range 379-1041
RPMEccentricity 4.27 Tube ID 95.25 No Load Pressure Loss 781 kPaContour Length 3632 Contour Length 3607 Speed Range 32-89
280XTHead Diameter 69.85 Side 1: 203.2 Max Pressure 1,475 kPa 1,844 kPaMajor Diameter 76.81 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
2,213 kPa 2,434 kPaHead Length 152.4 Side 2: 203.2 Max Torque 2,348 N-mWeight 110 Weight 146 Stall Pressure 2,360 kPa 2,950 kPa
N-m 2,935 N-m 3,522 N-m 3,874 3,540 kPa 3,894 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 3,757 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 4,696 N-m 5,635 N-m 6,199
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 67.61 0.660.58 67.82 0.46T
67.6967.92 0.36
21
43
65
87
Reline Lengths (mm) Breen: Max Min Willis: Max
2/24/2015
4039 Min 3734 Alternate Stator OD: 127.0 mm
0
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
4,500
0 500 1,000 1,500 2,000 2,500 3,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1041 LPM
700 LPM
379 LPM
0
10
20
30
40
50
60
70
80
90
100
0 500 1,000 1,500 2,000 2,500 3,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1041 LPM
700 LPM
379 LPM
0
5
10
15
20
25
30
35
40
0 500 1,000 1,500 2,000 2,500 3,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
475-7820 (B) 4.75” 7:8 Lobes 2 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 125
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 475-7820 (C)4.75" 7:8 Lobes 2 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 69.30 Tube OD 120.7 Rev per Unit Volume 0.27 Rev/LOverall Length 1308 Overall Length 1638 Flow Range 379-1041
RPMEccentricity 4.30 Tube ID 95.25 No Load Pressure Loss 963 kPaContour Length 1181 Contour Length 1181 Speed Range 102-280
280XTHead Diameter 69.85 Side 1: 330.2 Max Pressure 1,296 kPa 1,620 kPaMajor Diameter 77.90 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,944 kPa 2,138 kPaHead Length 127.0 Side 2: 127.0 Max Torque 657 N-mWeight 39 Weight 59 Stall Pressure 2,073 kPa 2,592 kPa
N-m 822 N-m 986 N-m 1,085 3,110 kPa 3,421 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 1,052 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 1,315 N-m 1,578 N-m 1,736
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 68.28 1.030.85 68.58 0.72T
68.4568.66 0.65
21
4 OS 69.04 0.270.14 69.19 0.113
69.1669.37 -0.06
65
87
Reline Lengths (mm) Breen: Max Min Willis: Max
2/24/2015
1638 Min 1334 Alternate Stator OD: 127.0 mm
0
200
400
600
800
1,000
1,200
1,400
0 500 1,000 1,500 2,000 2,500
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1041 LPM
700 LPM
379 LPM
0
50
100
150
200
250
300
0 500 1,000 1,500 2,000 2,500 3,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1041 LPM
700 LPM
379 LPM
0
5
10
15
20
25
30
35
0 500 1,000 1,500 2,000 2,500 3,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
475-7820 (C) 4.75” 7:8 Lobes 2 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 126
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 475-7822 (A)4.75" 7:8 Lobes 2.2 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 66.23 Tube OD 120.7 Rev per Unit Volume 0.15 Rev/LOverall Length 2718 Overall Length 2946 Flow Range 379-1041
RPMEccentricity 4.17 Tube ID 95.25 No Load Pressure Loss 844 kPaContour Length 2565 Contour Length 2540 Speed Range 55-152
280XTHead Diameter 69.85 Side 1: 203.2 Max Pressure 1,669 kPa 2,086 kPaMajor Diameter 74.58 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
2,504 kPa 2,754 kPaHead Length 152.4 Side 2: 203.2 Max Torque 1,561 N-mWeight 76 Weight 107 Stall Pressure 2,670 kPa 3,338 kPa
N-m 1,952 N-m 2,342 N-m 2,577 4,005 kPa 4,406 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 2,498 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 3,123 N-m 3,747 N-m 4,123
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 66.32 -0.09 66.19 0.04T
21
43
65
-1.088
67.317 2-OS 67.31 -1.08
Reline Lengths (mm) Breen: Max 3099 Min 2743 Willis: Max
2/24/2015
Min Alternate Stator OD: 127.0 mm
0
500
1,000
1,500
2,000
2,500
3,000
0 500 1,000 1,500 2,000 2,500 3,000 3,500
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1041 LPM
700 LPM
379 LPM
0
20
40
60
80
100
120
140
160
0 500 1,000 1,500 2,000 2,500 3,000 3,500
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1041 LPM
700 LPM
379 LPM
0
5
10
15
20
25
30
35
40
0 500 1,000 1,500 2,000 2,500 3,000 3,500
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
475-7822 (A) 4.75” 7:8 Lobes 2.2 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 127
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 475-7822 (B)4.75" 7:8 Lobes 2.2 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 66.23 Tube OD 120.7 Rev per Unit Volume 0.15 Rev/LOverall Length 2718 Overall Length 2946 Flow Range 379-1041
RPMEccentricity 4.17 Tube ID 95.25 No Load Pressure Loss 844 kPaContour Length 2565 Contour Length 2540 Speed Range 55-152
280XTHead Diameter 69.85 Side 1: 203.2 Max Pressure 1,669 kPa 2,086 kPaMajor Diameter 74.58 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
2,504 kPa 2,754 kPaHead Length 152.4 Side 2: 203.2 Max Torque 1,561 N-mWeight 76 Weight 107 Stall Pressure 2,670 kPa 3,338 kPa
N-m 1,952 N-m 2,342 N-m 2,577 4,005 kPa 4,406 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 2,498 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 3,123 N-m 3,747 N-m 4,123
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 65.10 1.131.03 65.56 0.67T
65.2065.66 0.57
21
4 OS 65.74 0.490.49 65.96 0.273
65.7465.99 0.24
65
66.52 -0.29 66.14 0.098
66.60 -0.37 66.19 0.047 2-OS
Reline Lengths (mm) Breen: Max Min Willis: Max
2/24/2015
3124 Min 2667 Alternate Stator OD: 127.0 mm
0
500
1,000
1,500
2,000
2,500
3,000
0 500 1,000 1,500 2,000 2,500 3,000 3,500
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
1.800
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1041 LPM
700 LPM
379 LPM
0
20
40
60
80
100
120
140
160
0 500 1,000 1,500 2,000 2,500 3,000 3,500
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1041 LPM
700 LPM
379 LPM
0
5
10
15
20
25
30
35
40
45
0 500 1,000 1,500 2,000 2,500 3,000 3,500
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
475-4511 4.75” 4:5 Lobes 1.1 Stages
475-7822 (B) 4.75” 7:8 Lobes 2.2 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 128
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 475-78264.75" 7:8 Lobes 2.6 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 69.80 Tube OD 120.7 Rev per Unit Volume 0.07 Rev/LOverall Length 5588 Overall Length 5824 Flow Range 379-1136
RPMEccentricity 4.43 Tube ID 101.60 No Load Pressure Loss 758 kPaContour Length 5443 Contour Length 5418 Speed Range 25-76
280XTHead Diameter 69.85 Side 1: 203.2 Max Pressure 2,234 kPa 2,793 kPaMajor Diameter 78.66 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
3,351 kPa 3,686 kPaHead Length 144.8 Side 2: 203.2 Max Torque 4,554 N-mWeight 168 Weight 173 Stall Pressure 3,574 kPa 4,468 kPa
N-m 5,693 N-m 6,832 N-m 7,515 5,361 kPa 5,897 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 7,286 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 9,109 N-m 10,930 N-m 12,022
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S S 70.00 -0.20 69.57 0.230.20 69.85 -0.05 69.85 -0.05T
69.6069.93 -0.13
21
4 OS OS 70.66 -0.86 69.95 -0.15-0.15 70.89 -1.09 70.10 -0.303
69.9570.31 -0.51
65
87
Reline Lengths (mm) Breen: Max Min Willis: Max
2/24/2015
6020 Min 5512 Alternate Stator OD: 127.0 mm
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
10,000
0 1,000 2,000 3,000 4,000 5,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
1.800
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1136 LPM
757 LPM
379 LPM
0
10
20
30
40
50
60
70
80
90
0 1,000 2,000 3,000 4,000 5,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1136 LPM
757 LPM
379 LPM
0
10
20
30
40
50
60
70
0 1,000 2,000 3,000 4,000 5,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
475-7826 4.75” 7:8 Lobes 2.6 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 129
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 475-78294.75" 7:8 Lobes 2.9 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 62.82 Tube OD 120.7 Rev per Unit Volume 0.08 Rev/LOverall Length 6147 Overall Length 6350 Flow Range 379-946
RPMEccentricity 4.13 Tube ID 95.25 No Load Pressure Loss 821 kPaContour Length 6007 Contour Length 5944 Speed Range 31-77
280XTHead Diameter 76.20 Side 1: 203.2 Max Pressure 2,399 kPa 2,999 kPaMajor Diameter 71.08 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
3,599 kPa 3,958 kPaHead Length 139.7 Side 2: 203.2 Max Torque 3,986 N-mWeight 149 Weight 237 Stall Pressure 3,838 kPa 4,798 kPa
N-m 4,982 N-m 5,979 N-m 6,577 5,757 kPa 6,333 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 6,377 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 7,972 N-m 9,566 N-m 10,523
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitS
WillisWillis Fit Breen Fit Willis Fit62.51 0.31
0 S OS 63.14 -0.3362.64 0.18
63.07 -0.25 63.17 -0.35T
63.30 -0.48
21
4 OS 63.60 -0.79 63.42 -0.613
65
-1.028
63.837 2-OS 63.91 -1.09
Reline Lengths (mm) Breen: Max 6353 Min 6048 Willis: Max
2/24/2015
6350 Min 6045 Alternate Stator OD: 127.0 mm
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
0 1,000 2,000 3,000 4,000 5,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
1.800
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
946 LPM
662 LPM
379 LPM
0
10
20
30
40
50
60
70
80
90
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
946 LPM
662 LPM
379 LPM
0
5
10
15
20
25
30
35
40
45
50
0 1,000 2,000 3,000 4,000 5,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
475-7829 4.75” 7:8 Lobes 2.9 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 130
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 475-78304.75" 7:8 Lobes 3 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 67.87 Tube OD 120.7 Rev per Unit Volume 0.17 Rev/LOverall Length 2870 Overall Length 3115 Flow Range 379-1041
RPMEccentricity 4.37 Tube ID 98.43 No Load Pressure Loss 790 kPaContour Length 2718 Contour Length 2683 Speed Range 65-180
280XTHead Diameter 69.85 Side 1: 215.9 Max Pressure 2,565 kPa 3,206 kPaMajor Diameter 76.61 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
3,848 kPa 4,232 kPaHead Length 152.4 Side 2: 215.9 Max Torque 2,019 N-mWeight 87 Weight 104 Stall Pressure 4,104 kPa 5,130 kPa
N-m 2,524 N-m 3,029 N-m 3,332 6,156 kPa 6,771 kPa
Thread Form 1 7/8"-4 SA Material Alloy Steel Stall Torque 3,231 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 4,039 N-m 4,847 N-m 5,332
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 67.64 0.230.20 68.02 -0.15T
67.6768.28 -0.41
21
43
65
87
Reline Lengths (mm) Breen: Max Min Willis: Max
2/24/2015
3124 Min 2809 Alternate Stator OD: 127.0 mm
0
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
0 1,000 2,000 3,000 4,000 5,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
1.800
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1041 LPM
700 LPM
379 LPM
0
20
40
60
80
100
120
140
160
180
200
0 1,000 2,000 3,000 4,000 5,000 6,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1041 LPM
700 LPM
379 LPM
0
10
20
30
40
50
60
70
0 1,000 2,000 3,000 4,000 5,000 6,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
475-7830 4.75” 7:8 Lobes 3 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 131
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 475-78314.75" 7:8 Lobes 3.1 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 68.28 Tube OD 120.7 Rev per Unit Volume 0.09 Rev/LOverall Length 5817 Overall Length 6045 Flow Range 379-1041
RPMEccentricity 4.27 Tube ID 95.25 No Load Pressure Loss 781 kPaContour Length 5664 Contour Length 5639 Speed Range 32-89
280XTHead Diameter 69.85 Side 1: 203.2 Max Pressure 2,751 kPa 3,439 kPaMajor Diameter 76.81 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
4,127 kPa 4,539 kPaHead Length 152.4 Side 2: 203.2 Max Torque 4,379 N-mWeight 168 Weight 221 Stall Pressure 4,401 kPa 5,502 kPa
N-m 5,474 N-m 6,569 N-m 7,226 6,602 kPa 7,262 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 7,006 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 8,759 N-m 10,510 N-m 11,561
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 67.69 0.580.51 67.64 0.63T
67.7767.97 0.30
21
4 OS 68.35 -0.08-0.18 68.40 -0.133
68.4568.55 -0.28
65
87
Reline Lengths (mm) Breen: Max Min Willis: Max
2/24/2015
6045 Min 5740 Alternate Stator OD: 127.0 mm
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
0 1,000 2,000 3,000 4,000 5,000 6,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1041 LPM
700 LPM
379 LPM
0
10
20
30
40
50
60
70
80
90
100
0 1,000 2,000 3,000 4,000 5,000 6,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1041 LPM
700 LPM
379 LPM
0
10
20
30
40
50
60
70
0 1,000 2,000 3,000 4,000 5,000 6,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
475-7831 4.75” 7:8 Lobes 3.1 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 132
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 475-78384.75" 7:8 Lobes 3.8 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 66.23 Tube OD 120.7 Rev per Unit Volume 0.15 Rev/LOverall Length 4521 Overall Length 4750 Flow Range 379-1041
RPMEccentricity 4.17 Tube ID 95.25 No Load Pressure Loss 1014 kPaContour Length 4369 Contour Length 4343 Speed Range 55-152
280XTHead Diameter 69.85 Side 1: 203.2 Max Pressure 3,282 kPa 4,103 kPaMajor Diameter 74.58 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
4,923 kPa 5,415 kPaHead Length 152.4 Side 2: 203.2 Max Torque 3,065 N-mWeight 125 Weight 175 Stall Pressure 5,251 kPa 6,564 kPa
N-m 3,831 N-m 4,597 N-m 5,057 7,876 kPa 8,664 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 4,903 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 6,130 N-m 7,355 N-m 8,091
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitS
WillisWillis Fit Breen Fit Willis Fit65.68 0.55 65.25 0.98
0 S OS 66.42 -0.1965.71 0.52 65.46 0.77
66.12 0.110.01 66.34 -0.11 66.19 0.04T
66.2266.42 -0.19
21
4 OS 2-OS 67.01 -0.78 66.83 -0.60-0.60 66.95 -0.72 66.85 -0.623
66.8367.06 -0.83
65
-1.088
67.317 2-OS 67.28 -1.05
Reline Lengths (mm) Breen: Max 5029 Min 4445 Willis: Max
2/24/2015
5029 Min 4445 Alternate Stator OD: 127.0 mm
0
1,000
2,000
3,000
4,000
5,000
6,000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1041 LPM
700 LPM
379 LPM
0
20
40
60
80
100
120
140
160
180
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1041 LPM
700 LPM
379 LPM
0
10
20
30
40
50
60
70
80
90
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
475-7838 4.75” 7:8 Lobes 3.8 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 133
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 475-7850 (A)4.75" 7:8 Lobes 5 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 68.55 Tube OD 120.7 Rev per Unit Volume 0.16 Rev/LOverall Length 4724 Overall Length 4928 Flow Range 379-1041
RPMEccentricity 4.34 Tube ID 95.25 No Load Pressure Loss 755 kPaContour Length 4572 Contour Length 4521 Speed Range 62-170
280XTHead Diameter 69.85 Side 1: 203.2 Max Pressure 4,833 kPa 6,041 kPaMajor Diameter 77.24 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
7,250 kPa 7,974 kPaHead Length 152.4 Side 2: 203.2 Max Torque 4,036 N-mWeight 142 Weight 179 Stall Pressure 7,732 kPa 9,666 kPa
N-m 5,045 N-m 6,054 N-m 6,660 11,599 kPa 12,759 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 6,457 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 8,072 N-m 9,687 N-m 10,656
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 68.00 0.560.53 68.17 0.38T
68.0268.28 0.28
21
4 OS 68.83 -0.28-0.36 69.06 -0.513
68.9169.19 -0.64
65
87
Reline Lengths (mm) Breen: Max Min Willis: Max
2/24/2015
5080 Min 4623 Alternate Stator OD: 127.0 mm
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
0 2,000 4,000 6,000 8,000 10,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1041 LPM
700 LPM
379 LPM
0
20
40
60
80
100
120
140
160
180
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1041 LPM
700 LPM
379 LPM
0
20
40
60
80
100
120
0 2,000 4,000 6,000 8,000 10,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
475-7850 (A) 4.75” 7:8 Lobes 5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 134
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 475-341104.75" 3:4 Lobes 11 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 57.32 Tube OD 120.7 Rev per Unit Volume 0.53 Rev/LOverall Length 5131 Overall Length 5283 Flow Range 379-1041
RPMEccentricity 7.09 Tube ID 95.25 No Load Pressure Loss 565 kPaContour Length 5004 Contour Length 4978 Speed Range 201-554
280XTHead Diameter 69.85 Side 1: 152.4 Max Pressure 9,908 kPa 12,385 kPaMajor Diameter 71.50 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
14,862 kPa 16,348 kPaHead Length 127.0 Side 2: 152.4 Max Torque 2,783 N-mWeight 106 Weight 197 Stall Pressure 15,852 kPa 19,816 kPa
N-m 3,479 N-m 4,175 N-m 4,592 23,779 kPa 26,157 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 4,453 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 5,566 N-m 6,680 N-m 7,348
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 56.16 1.160.98 56.74 0.57T
56.3456.62 0.70
21
43
65
87
Reline Lengths (mm) Breen: Max - Min - Willis: Max
2/24/2015
5283 Min 4978 Alternate Stator OD: 127.0 mm
0
1,000
2,000
3,000
4,000
5,000
6,000
0 5,000 10,000 15,000 20,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1041 LPM
700 LPM
379 LPM
0
100
200
300
400
500
600
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000 18,000 20,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1041 LPM
700 LPM
379 LPM
0
50
100
150
200
250
300
0 5,000 10,000 15,000 20,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
475-34110 4.75” 3:4 Lobes 11 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 135
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 475-341404.75" 3:4 Lobes 14 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 57.32 Tube OD 120.7 Rev per Unit Volume 0.60 Rev/LOverall Length 5817 Overall Length 6045 Flow Range 303-1041
RPMEccentricity 7.09 Tube ID 95.25 No Load Pressure Loss 563 kPaContour Length 5664 Contour Length 5639 Speed Range 180-620
280XTHead Diameter 69.85 Side 1: 203.2 Max Pressure 12,769 kPa 15,961 kPaMajor Diameter 71.50 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
19,154 kPa 21,069 kPaHead Length 152.4 Side 2: 203.2 Max Torque 3,202 N-mWeight 121 Weight 225 Stall Pressure 20,430 kPa 25,538 kPa
N-m 4,003 N-m 4,804 N-m 5,284 30,645 kPa 33,710 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 5,124 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 6,405 N-m 7,686 N-m 8,455
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0T
S 56.69 0.62 56.16 1.162
56.64 0.67 56.44 0.881
43
65
58.62 -1.31 58.14 -0.838
58.65 -1.33 58.37 -1.057 2-OS
Reline Lengths (mm) Breen: Max Min Willis: Max
2/24/2015
6045 Min 5740 Alternate Stator OD: 127.0 mm
0
1,000
2,000
3,000
4,000
5,000
6,000
0 5,000 10,000 15,000 20,000 25,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1041 LPM
700 LPM
303 LPM
0
100
200
300
400
500
600
700
0 5,000 10,000 15,000 20,000 25,000 30,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1041 LPM
700 LPM
303 LPM0
50
100
150
200
250
300
350
0 5,000 10,000 15,000 20,000 25,000 30,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
475-34140 4.75” 3:4 Lobes 14 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 136
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 475-910404.75" 9:10 Lobes 4 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 67.84 Tube OD 120.7 Rev per Unit Volume 0.15 Rev/LOverall Length 3839 Overall Length 4039 Flow Range 379-946
RPMEccentricity 3.48 Tube ID 95.25 No Load Pressure Loss 1018 kPaContour Length 3686 Contour Length 3632 Speed Range 56-140
280XTHead Diameter 73.66 Side 1: 203.2 Max Pressure 3,902 kPa 4,878 kPaMajor Diameter 74.80 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
5,853 kPa 6,438 kPaHead Length 152.4 Side 2: 203.2 Max Torque 3,424 N-mWeight 107 Weight 148 Stall Pressure 6,243 kPa 7,804 kPa
N-m 4,280 N-m 5,136 N-m 5,650 9,364 kPa 10,301 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 5,479 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 6,849 N-m 8,218 N-m 9,040
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 68.02 -0.18-0.28 68.28 -0.43T
68.1268.33 -0.48
21
4 OS 68.25 -0.41-0.63 68.61 -0.763
68.4868.58 -0.74
65
87
Reline Lengths (mm) Breen: Max Min Willis: Max
2/24/2015
4039 Min 3734 Alternate Stator OD: 127.0 mm
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
946 LPM
662 LPM
379 LPM
0
20
40
60
80
100
120
140
160
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
946 LPM
662 LPM
379 LPM
0
10
20
30
40
50
60
70
80
90
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
475-91040 4.75” 9:10 Lobes 4 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 137
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 500-23905" 2:3 Lobes 9 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 75.44 Tube OD 127 Rev per Unit Volume 0.87 Rev/LOverall Length 6172 Overall Length 6350 Flow Range 568-1325
RPMEccentricity 3.25 Tube ID 101.60 No Load Pressure Loss 1245 kPaContour Length 6020 Contour Length 5944 Speed Range 492-1148
280XTHead Diameter 73.15 Side 1: 203.2 Max Pressure 7,005 kPa 8,756 kPaMajor Diameter 81.94 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
10,508 kPa 11,558 kPaHead Length 152.4 Side 2: 203.2 Max Torque 1,234 N-mWeight 166 Weight 254 Stall Pressure 11,208 kPa 14,010 kPa
N-m 1,542 N-m 1,851 N-m 2,036 16,812 kPa 18,493 kPa
Thread Form 1 7/8" SA Material Alloy Steel Stall Torque 1,974 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 2,468 N-m 2,961 N-m 3,258
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 75.82 -0.37 75.84 -0.40T
21
43
65
87
Reline Lengths (mm) Breen: Max 6350 Min 6045 Willis: Max
2/24/2015
- Min - Alternate Stator OD: - mm
0
500
1,000
1,500
2,000
2,500
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
3.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1325 LPM
946 LPM
568 LPM
0
200
400
600
800
1,000
1,200
1,400
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1325 LPM
946 LPM
568 LPM
0
50
100
150
200
250
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
500-2390 5” 2:3 Lobes 9 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 138
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 500-56405" 5:6 Lobes 4 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 61.03 Tube OD 127 Rev per Unit Volume 0.27 Rev/LOverall Length 3442 Overall Length 3556 Flow Range 379-946
RPMEccentricity 5.53 Tube ID 95.25 No Load Pressure Loss 1357 kPaContour Length 3251 Contour Length 3151 Speed Range 103-258
280XTHead Diameter 72.14 Side 1: 203.2 Max Pressure 2,854 kPa 3,568 kPaMajor Diameter 72.09 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
4,281 kPa 4,709 kPaHead Length 190.5 Side 2: 203.2 Max Torque 1,497 N-mWeight 80 Weight 154 Stall Pressure 4,566 kPa 5,708 kPa
N-m 1,871 N-m 2,245 N-m 2,470 6,849 kPa 7,534 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 2,395 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 2,994 N-m 3,593 N-m 3,952
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 60.88 0.15 60.88 0.15T
21
43
61.19 -0.166
61.195 OS -0.16
87
Reline Lengths (mm) Breen: Max 3556 Min 3378 Willis: Max
2/24/2015
- Min - Alternate Stator OD: 120.7 mm
0
500
1,000
1,500
2,000
2,500
3,000
0 1,000 2,000 3,000 4,000 5,000 6,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
946 LPM
662 LPM
379 LPM
0
50
100
150
200
250
300
0 1,000 2,000 3,000 4,000 5,000 6,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
946 LPM
662 LPM
379 LPM
0
10
20
30
40
50
60
70
0 1,000 2,000 3,000 4,000 5,000 6,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
500-5640 5” 5:6 Lobes 4 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 139
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 500-67605" 6:7 Lobes 6 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 67.23 Tube OD 127 Rev per Unit Volume 0.27 Rev/LOverall Length 4559 Overall Length 4699 Flow Range 757-1325
RPMEccentricity 4.86 Tube ID 101.60 No Load Pressure Loss 1998 kPaContour Length 4407 Contour Length 4294 Speed Range 205-360
280XTHead Diameter 69.85 Side 1: 203.2 Max Pressure 4,544 kPa 5,680 kPaMajor Diameter 76.95 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
6,816 kPa 7,498 kPaHead Length 152.4 Side 2: 203.2 Max Torque 2,341 N-mWeight 126 Weight 202 Stall Pressure 7,270 kPa 9,088 kPa
N-m 2,927 N-m 3,512 N-m 3,864 10,905 kPa 11,996 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 3,746 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 4,683 N-m 5,620 N-m 6,182
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitUS 66.80 0.42
WillisWillis Fit Breen Fit Willis Fit0.42
0 S 67.28 -0.0666.8067.23 -0.01
T
21
43
65
-1.358
68.587 2-OS 68.68 -1.46
Reline Lengths (mm) Breen: Max 4699 Min 4343 Willis: Max
2/24/2015
- Min - Alternate Stator OD: - mm
0
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
4,500
0 2,000 4,000 6,000 8,000 10,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
3.000
3.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1325 LPM
1041 LPM
757 LPM
0
50
100
150
200
250
300
350
400
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1325 LPM
1041 LPM
757 LPM
0
20
40
60
80
100
120
140
0 2,000 4,000 6,000 8,000 10,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
500-6760 5” 6:7 Lobes 6 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 140
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 500-67705" 6:7 Lobes 7 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 66.94 Tube OD 127 Rev per Unit Volume 0.21 Rev/LOverall Length 5207 Overall Length 5385 Flow Range 757-1325
RPMEccentricity 4.87 Tube ID 101.60 No Load Pressure Loss 1029 kPaContour Length 5055 Contour Length 4979 Speed Range 160-281
280XTHead Diameter 73.66 Side 1: 203.2 Max Pressure 6,550 kPa 8,188 kPaMajor Diameter 76.67 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
9,825 kPa 10,808 kPaHead Length 152.4 Side 2: 203.2 Max Torque 4,314 N-mWeight 145 Weight 214 Stall Pressure 10,480 kPa 13,100 kPa
N-m 5,393 N-m 6,471 N-m 7,118 15,720 kPa 17,292 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 6,903 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 8,628 N-m 10,354 N-m 11,390
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 67.34 -0.40 67.21 -0.27T
21
43
6 OS 67.89 -0.96 67.89 -0.965
87
Reline Lengths (mm) Breen: Max 5385 Min 5080 Willis: Max
2/24/2015
Min Alternate Stator OD: 120.7 mm
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1325 LPM
1041 LPM
757 LPM
0
50
100
150
200
250
300
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1325 LPM
1041 LPM
757 LPM
0
20
40
60
80
100
120
140
160
180
200
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
500-6770 5” 6:7 Lobes 7 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 141
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 500-67805" 6:7 Lobes 8 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 66.94 Tube OD 127 Rev per Unit Volume 0.21 Rev/LOverall Length 6121 Overall Length 6248 Flow Range 568-1325
RPMEccentricity 4.87 Tube ID 101.60 No Load Pressure Loss 919 kPaContour Length 5969 Contour Length 5867 Speed Range 121-282
280XTHead Diameter 73.66 Side 1: 190.5 Max Pressure 8,032 kPa 10,040 kPaMajor Diameter 76.67 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
12,048 kPa 13,253 kPaHead Length 152.4 Side 2: 190.5 Max Torque 5,278 N-mWeight 171 Weight 247 Stall Pressure 12,851 kPa 16,064 kPa
N-m 6,598 N-m 7,917 N-m 8,709 19,276 kPa 21,204 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 8,445 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 10,557 N-m 12,668 N-m 13,935
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitS
WillisWillis Fit Breen Fit Willis Fit66.57 0.36 66.45 0.49
0 S 67.34 -0.4066.88 0.06 66.55 0.39
67.18 -0.25T
21
4 OS 2-OS 67.61 -0.68 67.44 -0.50-0.53 67.51 -0.58 67.51 -0.583
67.4667.74 -0.81
6 2-OS 68.05 -1.11 67.89 -0.965
87
Reline Lengths (mm) Breen: Max 6353 Min 6038 Willis: Max
2/24/2015
6350 Min 5944 Alternate Stator OD: mm
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
10,000
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
1.800
2.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1325 LPM
946 LPM
568 LPM
0
50
100
150
200
250
300
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000 18,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1325 LPM
946 LPM
568 LPM
0
50
100
150
200
250
300
0 5,000 10,000 15,000 20,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
500-6780 5” 6:7 Lobes 8 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 142
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 500-7850 (B)5" 7:8 Lobes 5 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 68.66 Tube OD 127 Rev per Unit Volume 0.18 Rev/LOverall Length 4724 Overall Length 5029 Flow Range 379-1136
RPMEccentricity 4.29 Tube ID 95.25 No Load Pressure Loss 808 kPaContour Length 4572 Contour Length 4623 Speed Range 68-205
280XTHead Diameter 69.85 Side 1: 203.2 Max Pressure 5,812 kPa 7,265 kPaMajor Diameter 77.24 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
8,718 kPa 9,590 kPaHead Length 152.4 Side 2: 203.2 Max Torque 4,403 N-mWeight 142 Weight 232 Stall Pressure 9,299 kPa 11,624 kPa
N-m 5,504 N-m 6,605 N-m 7,266 13,948 kPa 15,343 kPa
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 7,046 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 8,807 N-m 10,568 N-m 11,625
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 68.53 0.130.03 68.71 -0.05T
68.6368.94 -0.28
21
43
65
87
Reline Lengths (mm) Breen: Max - Min - Willis: Max
2/24/2015
4775 Min 5029 Alternate Stator OD: 120.7 mm
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
0 2,000 4,000 6,000 8,000 10,000 12,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1136 LPM
757 LPM
379 LPM
0
50
100
150
200
250
0 2,000 4,000 6,000 8,000 10,000 12,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1136 LPM
757 LPM
379 LPM
0
20
40
60
80
100
120
140
160
0 2,000 4,000 6,000 8,000 10,000 12,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
500-7850 (B) 5” 7:8 Lobes 5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 143
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 625-45436.25" 4:5 Lobes 4.3 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 81.79 Tube OD 158.8 Rev per Unit Volume 0.17 Rev/LOverall Length 2972 Overall Length 3150 Flow Range 568-1514
RPMEccentricity 8.28 Tube ID 127.00 No Load Pressure Loss 658 kPaContour Length 2794 Contour Length 2743 Speed Range 98-262
280XTHead Diameter 88.90 Side 1: 203.2 Max Pressure 3,640 kPa 4,550 kPaMajor Diameter 98.35 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
5,460 kPa 6,006 kPaHead Length 177.8 Side 2: 203.2 Max Torque 3,076 N-mWeight 128 Weight 192 Stall Pressure 5,824 kPa 7,280 kPa
N-m 3,845 N-m 4,614 N-m 5,076 8,736 kPa 9,609 kPa
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 4,922 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 6,153 N-m 7,383 N-m 8,121
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 80.72 1.070.89 81.23 0.56T
80.9081.15 0.63
21
4 OS 81.97 -0.18-0.38 82.17 -0.383
82.1782.14 -0.36
65
87
Reline Lengths (mm) Breen: Max - Min - Willis: Max
2/24/2015
3150 Min 2845 Alternate Stator OD: 165.1 mm
0
1,000
2,000
3,000
4,000
5,000
6,000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1514 LPM
1041 LPM
568 LPM
0
50
100
150
200
250
300
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1514 LPM
1041 LPM
568 LPM
0
20
40
60
80
100
120
140
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
625-4543 6.25” 4:5 Lobes 4.3 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 144
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 625-45756.25" 4:5 Lobes 7.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 81.79 Tube OD 158.8 Rev per Unit Volume 0.17 Rev/LOverall Length 4991 Overall Length 5169 Flow Range 568-1514
RPMEccentricity 8.28 Tube ID 127.00 No Load Pressure Loss 659 kPaContour Length 4813 Contour Length 4763 Speed Range 98-263
280XTHead Diameter 88.90 Side 1: 203.2 Max Pressure 6,812 kPa 8,515 kPaMajor Diameter 98.35 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
10,218 kPa 11,240 kPaHead Length 177.8 Side 2: 203.2 Max Torque 5,738 N-mWeight 214 Weight 317 Stall Pressure 10,899 kPa 13,624 kPa
N-m 7,173 N-m 8,607 N-m 9,468 16,348 kPa 17,983 kPa
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 9,181 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 11,477 N-m 13,772 N-m 15,149
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitS
WillisWillis Fit Breen Fit Willis Fit81.15 0.63 80.62 1.17
0 S 81.66 0.1381.23 0.56 80.90 0.89
81.53 0.25T
21
4 OS 81.81 -0.03-0.28 82.22 -0.433
82.0782.32 -0.53
65
87
Reline Lengths (mm) Breen: Max 5169 Min 4864 Willis: Max
2/24/2015
5169 Min 4864 Alternate Stator OD: 165.1 mm
0
2,000
4,000
6,000
8,000
10,000
12,000
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1514 LPM
1041 LPM
568 LPM
0
50
100
150
200
250
300
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1514 LPM
1041 LPM
568 LPM
0
50
100
150
200
250
300
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
625-4575 6.25” 4:5 Lobes 7.5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 145
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 625-56456.25" 5:6 Lobes 4.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 84.56 Tube OD 158.8 Rev per Unit Volume 0.18 Rev/LOverall Length 5004 Overall Length 3302 Flow Range 379-1514
RPMEccentricity 7.16 Tube ID 127.00 No Load Pressure Loss 1075 kPaContour Length 4813 Contour Length 2896 Speed Range 68-273
280XTHead Diameter 88.90 Side 1: 203.2 Max Pressure 3,916 kPa 4,895 kPaMajor Diameter 98.88 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
5,874 kPa 6,461 kPaHead Length 190.5 Side 2: 203.2 Max Torque 3,101 N-mWeight 221 Weight 190 Stall Pressure 6,265 kPa 7,832 kPa
N-m 3,877 N-m 4,652 N-m 5,117 9,398 kPa 10,338 kPa
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 4,962 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 6,203 N-m 7,443 N-m 8,188
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 84.61 -0.05 84.63 -0.08T
21
43
65
87
Reline Lengths (mm) Breen: Max 3302 Min 2997 Willis: Max
2/24/2015
- Min - Alternate Stator OD: 165.1 mm
0
1,000
2,000
3,000
4,000
5,000
6,000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
1.800
2.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1514 LPM
946 LPM
379 LPM
0
50
100
150
200
250
300
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1514 LPM
946 LPM
379 LPM0
20
40
60
80
100
120
140
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
625-5645 6.25” 5:6 Lobes 4.5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 146
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 625-56556.25" 5:6 Lobes 5.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 86.62 Tube OD 158.8 Rev per Unit Volume 0.14 Rev/LOverall Length 3086 Overall Length 5169 Flow Range 757-1893
RPMEccentricity 6.92 Tube ID 127.00 No Load Pressure Loss 1794 kPaContour Length 2934 Contour Length 4763 Speed Range 106-267
280XTHead Diameter 88.90 Side 1: 203.2 Max Pressure 4,061 kPa 5,076 kPaMajor Diameter 100.47 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
6,092 kPa 6,701 kPaHead Length 152.4 Side 2: 203.2 Max Torque 4,118 N-mWeight 136 Weight 294 Stall Pressure 6,497 kPa 8,122 kPa
N-m 5,148 N-m 6,178 N-m 6,795 9,746 kPa 10,721 kPa
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 6,589 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 8,237 N-m 9,884 N-m 10,873
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 86.31 0.31 86.39 0.23T
21
43
65
-1.198
87.817 2-OS 87.81 -1.19
Reline Lengths (mm) Breen: Max 5169 Min 4864 Willis: Max
2/24/2015
Min Alternate Stator OD: 155.6 mm
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
1.800
2.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1893 LPM
1325 LPM
757 LPM
0
50
100
150
200
250
300
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1893 LPM
1325 LPM
757 LPM
0
20
40
60
80
100
120
140
160
180
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
625-5655 6.25” 5:6 Lobes 5.5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 147
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 625-78256.25" 7:8 Lobes 2.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 93.85 Tube OD 158.8 Rev per Unit Volume 0.04 Rev/LOverall Length 5017 Overall Length 5161 Flow Range 1136-1893
RPMEccentricity 5.84 Tube ID 127.00 No Load Pressure Loss 1011 kPaContour Length 4864 Contour Length 4780 Speed Range 48-80
280XTHead Diameter 88.90 Side 1: 190.5 Max Pressure 1,820 kPa 2,275 kPaMajor Diameter 105.54 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
2,730 kPa 3,003 kPaHead Length 152.4 Side 2: 190.5 Max Torque 5,865 N-mWeight 271 Weight 310 Stall Pressure 2,912 kPa 3,640 kPa
N-m 7,331 N-m 8,797 N-m 9,677 4,368 kPa 4,804 kPa
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 9,384 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 11,730 N-m 14,076 N-m 15,481
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 92.99 0.860.79 93.37 0.48T
93.0793.37 0.48
21
4 OS 93.75 0.10-0.03 94.08 -0.233
93.8894.23 -0.38
65
87
Reline Lengths (mm) Breen: Max - Min - Willis: Max
2/24/2015
5161 Min 4856 Alternate Stator OD: 165.1 mm
0
2,000
4,000
6,000
8,000
10,000
12,000
0 500 1,000 1,500 2,000 2,500 3,000 3,500
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
1.800
2.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1893 LPM
1514 LPM
1136 LPM
0
10
20
30
40
50
60
70
80
90
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1893 LPM
1514 LPM
1136 LPM
0
10
20
30
40
50
60
70
80
90
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
625-7825 6.25” 7:8 Lobes 2.5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 148
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 625-78286.25" 7:8 Lobes 2.8 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 89.67 Tube OD 158.8 Rev per Unit Volume 0.09 Rev/LOverall Length 2972 Overall Length 3150 Flow Range 568-1514
RPMEccentricity 5.72 Tube ID 127.00 No Load Pressure Loss 787 kPaContour Length 2819 Contour Length 2743 Speed Range 49-133
280XTHead Diameter 88.90 Side 1: 203.2 Max Pressure 2,344 kPa 2,930 kPaMajor Diameter 101.10 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
3,516 kPa 3,868 kPaHead Length 152.4 Side 2: 203.2 Max Torque 3,650 N-mWeight 154 Weight 191 Stall Pressure 3,750 kPa 4,688 kPa
N-m 4,562 N-m 5,475 N-m 6,022 5,625 kPa 6,188 kPa
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 5,839 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 7,300 N-m 8,759 N-m 9,636
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitS
WillisWillis Fit Breen Fit Willis Fit89.05 0.61 88.85 0.82
0 S OS 89.59 0.0889.23 0.43 88.93 0.74
89.18 0.490.28 89.66 0.00 89.79 -0.12T
89.3889.76 -0.10
21
43
65
87
Reline Lengths (mm) Breen: Max 3302 Min 2997 Willis: Max
2/24/2015
3302 Min 2845 Alternate Stator OD: 165.1 mm
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
0 1,000 2,000 3,000 4,000 5,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1514 LPM
1041 LPM
568 LPM
0
20
40
60
80
100
120
140
0 1,000 2,000 3,000 4,000 5,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1514 LPM
1041 LPM
568 LPM
0
10
20
30
40
50
60
70
80
90
0 1,000 2,000 3,000 4,000 5,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
625-7828 6.25” 7:8 Lobes 2.8 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 149
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 625-7829 (A)6.25" 7:8 Lobes 2.9 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 94.92 Tube OD 158.8 Rev per Unit Volume 0.04 Rev/LOverall Length 5613 Overall Length 5812 Flow Range 757-1893
RPMEccentricity 5.92 Tube ID 127.00 No Load Pressure Loss 867 kPaContour Length 5461 Contour Length 5405 Speed Range 31-79
280XTHead Diameter 101.60 Side 1: 203.2 Max Pressure 2,441 kPa 3,051 kPaMajor Diameter 106.76 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
3,662 kPa 4,028 kPaHead Length 152.4 Side 2: 203.2 Max Torque 7,943 N-mWeight 312 Weight 348 Stall Pressure 3,905 kPa 4,882 kPa
N-m 9,929 N-m 11,915 N-m 13,106 5,858 kPa 6,444 kPa
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 12,707 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 15,887 N-m 19,063 N-m 20,970
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitS
WillisWillis Fit Breen Fit Willis Fit94.44 0.48 94.21 0.71
0 S 94.92 0.0094.67 0.25 94.41 0.51
94.82 0.10T
21
43
65
87
Reline Lengths (mm) Breen: Max 5810 Min 5505 Willis: Max
2/24/2015
5812 Min 5507 Alternate Stator OD: 165.1 mm
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
0 1,000 2,000 3,000 4,000 5,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
1.800
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1893 LPM
1325 LPM
757 LPM
0
10
20
30
40
50
60
70
80
90
0 1,000 2,000 3,000 4,000 5,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1893 LPM
1325 LPM
757 LPM
0
20
40
60
80
100
120
0 1,000 2,000 3,000 4,000 5,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
625-7829 (A) 6.25” 7:8 Lobes 2.9 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 150
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 625-78306.25" 7:8 Lobes 3 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 89.28 Tube OD 158.8 Rev per Unit Volume 0.08 Rev/LOverall Length 2972 Overall Length 3150 Flow Range 568-1514
RPMEccentricity 5.91 Tube ID 127.00 No Load Pressure Loss 731 kPaContour Length 2819 Contour Length 2743 Speed Range 46-124
280XTHead Diameter 88.90 Side 1: 203.2 Max Pressure 2,620 kPa 3,275 kPaMajor Diameter 101.09 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
3,930 kPa 4,323 kPaHead Length 152.4 Side 2: 203.2 Max Torque 4,353 N-mWeight 164 Weight 188 Stall Pressure 4,192 kPa 5,240 kPa
N-m 5,442 N-m 6,530 N-m 7,183 6,288 kPa 6,916 kPa
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 6,966 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 8,707 N-m 10,449 N-m 11,492
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 88.72 0.560.41 89.23 0.05T
88.8789.13 0.15
21
43
65
87
Reline Lengths (mm) Breen: Max Min Willis: Max
2/24/2015
3150 Min 2845 Alternate Stator OD: 165.1 mm
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
0 1,000 2,000 3,000 4,000 5,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1514 LPM
1041 LPM
568 LPM
0
20
40
60
80
100
120
140
0 1,000 2,000 3,000 4,000 5,000 6,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1514 LPM
1041 LPM
568 LPM
0
10
20
30
40
50
60
70
80
90
100
0 1,000 2,000 3,000 4,000 5,000 6,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
625-7830 6.25” 7:8 Lobes 3 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 151
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 625-78356.25" 7:8 Lobes 3.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 91.95 Tube OD 158.8 Rev per Unit Volume 0.05 Rev/LOverall Length 5645 Overall Length 5874 Flow Range 568-1514
RPMEccentricity 5.72 Tube ID 127.00 No Load Pressure Loss 779 kPaContour Length 5493 Contour Length 5467 Speed Range 31-83
280XTHead Diameter 88.90 Side 1: 203.2 Max Pressure 3,178 kPa 3,973 kPaMajor Diameter 103.38 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
4,767 kPa 5,244 kPaHead Length 152.4 Side 2: 203.2 Max Torque 7,923 N-mWeight 292 Weight 356 Stall Pressure 5,084 kPa 6,356 kPa
N-m 9,903 N-m 11,884 N-m 13,072 7,627 kPa 8,389 kPa
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 12,674 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 15,846 N-m 19,014 N-m 20,914
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 90.93 1.020.91 91.34 0.61T
91.0391.31 0.63
21
43
65
87
Reline Lengths (mm) Breen: Max Min Willis: Max
2/24/2015
5875 Min 5570 Alternate Stator OD: 165.1 mm
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
0 1,000 2,000 3,000 4,000 5,000 6,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
1.800
2.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1514 LPM
1041 LPM
568 LPM
0
10
20
30
40
50
60
70
80
90
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1514 LPM
1041 LPM
568 LPM
0
20
40
60
80
100
120
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
625-7835 6.25” 7:8 Lobes 3.5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 152
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 625-78486.25" 7:8 Lobes 4.8 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 89.67 Tube OD 158.8 Rev per Unit Volume 0.09 Rev/LOverall Length 4953 Overall Length 5161 Flow Range 757-1893
RPMEccentricity 5.72 Tube ID 127.00 No Load Pressure Loss 966 kPaContour Length 4788 Contour Length 4755 Speed Range 67-168
280XTHead Diameter 88.90 Side 1: 203.2 Max Pressure 4,461 kPa 5,576 kPaMajor Diameter 101.10 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
6,692 kPa 7,361 kPaHead Length 165.1 Side 2: 203.2 Max Torque 6,863 N-mWeight 256 Weight 313 Stall Pressure 7,137 kPa 8,922 kPa
N-m 8,579 N-m 10,294 N-m 11,324 10,706 kPa 11,777 kPa
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 10,980 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 13,726 N-m 16,471 N-m 18,118
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitS
WillisWillis Fit Breen Fit Willis Fit89.05 0.61 88.62 1.04
0 S OS 89.81 -0.1589.05 0.61 88.80 0.87
89.46 0.21-0.02 89.71 -0.05 89.61 0.05T
89.6989.94 -0.28
21
4 OS 90.40 -0.73 90.35 -0.683
65
87
Reline Lengths (mm) Breen: Max 5169 Min 4813 Willis: Max
2/24/2015
5161 Min 4856 Alternate Stator OD: 165.1 mm
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
0 2,000 4,000 6,000 8,000 10,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1893 LPM
1325 LPM
757 LPM
0
20
40
60
80
100
120
140
160
180
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1893 LPM
1325 LPM
757 LPM
0
20
40
60
80
100
120
140
160
180
200
0 2,000 4,000 6,000 8,000 10,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
625-7848 6.25” 7:8 Lobes 4.8 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 153
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 650-56356.5" 5:6 Lobes 3.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 92.96 Tube OD 165.1 Rev per Unit Volume 0.14 Rev/LOverall Length 2845 Overall Length 3097 Flow Range 1136-2271
RPMEccentricity 7.11 Tube ID 133.35 No Load Pressure Loss 1042 kPaContour Length 2660 Contour Length 2589 Speed Range 157-315
280XTHead Diameter 107.19 Side 1: 254.0 Max Pressure 2,641 kPa 3,301 kPaMajor Diameter 107.19 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
3,962 kPa 4,358 kPaHead Length 185.1 Side 2: 254.0 Max Torque 2,720 N-mWeight 129 Weight 201 Stall Pressure 4,225 kPa 5,282 kPa
N-m 3,400 N-m 4,080 N-m 4,488 6,338 kPa 6,972 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 4,352 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 5,441 N-m 6,529 N-m 7,182
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 92.30 0.660.51 92.79 0.18T
92.4693.01 -0.05
21
43
65
87
Reline Lengths (mm) Breen: Max - Min - Willis: Max
2/24/2015
3096 Min 2791 Alternate Stator OD: - mm
0
1,000
2,000
3,000
4,000
5,000
6,000
0 1,000 2,000 3,000 4,000 5,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
2271 LPM
1703 LPM
1136 LPM
0
50
100
150
200
250
300
350
0 1,000 2,000 3,000 4,000 5,000 6,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
2271 LPM
1703 LPM
1136 LPM
0
20
40
60
80
100
120
140
160
0 1,000 2,000 3,000 4,000 5,000 6,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
650-5635 6.5” 5:6 Lobes 3.5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 154
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 650-89306.5" 8:9 Lobes 3 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 104.47 Tube OD 165.1 Rev per Unit Volume 0.06 Rev/LOverall Length 3010 Overall Length 3175 Flow Range 757-1514
RPMEccentricity 6.18 Tube ID 139.70 No Load Pressure Loss 730 kPaContour Length 2822 Contour Length 2807 Speed Range 48-96
280XTHead Diameter 101.60 Side 1: 184.2 Max Pressure 2,875 kPa 3,594 kPaMajor Diameter 116.84 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
4,313 kPa 4,744 kPaHead Length 188.0 Side 2: 184.2 Max Torque 6,015 N-mWeight 228 Weight 161 Stall Pressure 4,600 kPa 5,750 kPa
N-m 7,519 N-m 9,023 N-m 9,926 6,900 kPa 7,590 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 9,625 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 12,031 N-m 14,438 N-m 15,881
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S S 103.28 1.19 102.87 1.601.47 103.25 1.22 103.33 1.14T
103.00103.28 1.19
21
4 OS OS 104.39 0.08 104.01 0.460.51 104.39 0.08 104.42 0.053
103.96104.29 0.18
65
87
Reline Lengths (mm) Breen: Max 3330 Min 2972 Willis: Max
2/24/2015
3327 Min 2870 Alternate Stator OD: 171.5 mm
0
2,000
4,000
6,000
8,000
10,000
12,000
0 1,000 2,000 3,000 4,000 5,000 6,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
1.800
2.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1514 LPM
1136 LPM
757 LPM
0
20
40
60
80
100
120
0 1,000 2,000 3,000 4,000 5,000 6,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1514 LPM
1136 LPM
757 LPM
0
20
40
60
80
100
120
0 1,000 2,000 3,000 4,000 5,000 6,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
650-8930 6.5” 8:9 Lobes 3 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 155
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 650-89406.5" 8:9 Lobes 4 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 98.76 Tube OD 165.1 Rev per Unit Volume 0.05 Rev/LOverall Length 3861 Overall Length 4318 Flow Range 757-1893
RPMEccentricity 5.49 Tube ID 133.35 No Load Pressure Loss 958 kPaContour Length 3708 Contour Length 3913 Speed Range 34-86
280XTHead Diameter 96.52 Side 1: 203.2 Max Pressure 3,992 kPa 4,990 kPaMajor Diameter 109.73 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
5,988 kPa 6,587 kPaHead Length 152.4 Side 2: 203.2 Max Torque 11,670 N-mWeight 235 Weight 248 Stall Pressure 6,387 kPa 7,984 kPa
N-m 14,587 N-m 17,505 N-m 19,255 9,580 kPa 10,538 kPa
Thread Form 62C0005 Material Alloy Steel Stall Torque 18,671 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 23,340 N-m 28,005 N-m 30,806
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0T
21
S S 98.55 0.20 0.30 98.37 0.38 97.92 0.844
98.43 0.33 98.04 0.71 98.453
65
87
Reline Lengths (mm) Breen: Max 4321 Min 3965 Willis: Max
2/24/2015
Min Alternate Stator OD: 0 mm
0
5,000
10,000
15,000
20,000
25,000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
1.800
2.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1893 LPM
1325 LPM
757 LPM
0
10
20
30
40
50
60
70
80
90
100
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1893 LPM
1325 LPM
757 LPM
0
20
40
60
80
100
120
140
160
180
0 2,000 4,000 6,000 8,000 10,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
650-8940 6.5” 8:9 Lobes 4 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 156
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 650-910376.5" 9:10 Lobes 3.7 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 92.54 Tube OD 165.1 Rev per Unit Volume 0.05 Rev/LOverall Length 5296 Overall Length 5448 Flow Range 757-1893
RPMEccentricity 4.63 Tube ID 139.70 No Load Pressure Loss 1386 kPaContour Length 5105 Contour Length 5042 Speed Range 35-88
280XTHead Diameter 104.14 Side 1: 203.2 Max Pressure 2,255 kPa 2,819 kPaMajor Diameter 101.80 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
3,383 kPa 3,721 kPaHead Length 190.5 Side 2: 203.2 Max Torque 6,273 N-mWeight 272 Weight 305 Stall Pressure 3,608 kPa 4,510 kPa
N-m 7,841 N-m 9,409 N-m 10,350 5,412 kPa 5,953 kPa
Thread Form 2 7/8" API IF Material Alloy Steel Stall Torque 10,036 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 12,546 N-m 15,055 N-m 16,560
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 92.20 0.340.14 92.76 -0.22T
92.4192.71 -0.17
21
43
65
87
Reline Lengths (mm) Breen: Max - Min - Willis: Max
2/24/2015
5448 Min 5144 Alternate Stator OD: - mm
0
2,000
4,000
6,000
8,000
10,000
12,000
0 1,000 2,000 3,000 4,000 5,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
3.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1893 LPM
1325 LPM
757 LPM
0
10
20
30
40
50
60
70
80
90
100
0 1,000 2,000 3,000 4,000 5,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1893 LPM
1325 LPM
757 LPM
0
10
20
30
40
50
60
70
80
90
100
0 1,000 2,000 3,000 4,000 5,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
650-91037 6.5” 9:10 Lobes 3.7 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 157
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 650-910406.5" 9:10 Lobes 4 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 92.80 Tube OD 165.1 Rev per Unit Volume 0.09 Rev/LOverall Length 3721 Overall Length 3861 Flow Range 757-1893
RPMEccentricity 4.55 Tube ID 139.70 No Load Pressure Loss 1372 kPaContour Length 3531 Contour Length 3454 Speed Range 70-175
280XTHead Diameter 104.14 Side 1: 203.2 Max Pressure 3,640 kPa 4,550 kPaMajor Diameter 101.90 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
5,460 kPa 6,006 kPaHead Length 190.5 Side 2: 203.2 Max Torque 5,115 N-mWeight 195 Weight 214 Stall Pressure 5,824 kPa 7,280 kPa
N-m 6,394 N-m 7,673 N-m 8,440 8,736 kPa 9,609 kPa
Thread Form 2 7/8" API IF Material Alloy Steel Stall Torque 8,184 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 10,230 N-m 12,277 N-m 13,504
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 92.53 0.270.04 92.99 -0.19T
92.7693.07 -0.27
21
43
65
87
Reline Lengths (mm) Breen: Max - Min - Willis: Max
2/24/2015
3861 Min 3556 Alternate Stator OD: - mm
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
10,000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
3.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1893 LPM
1325 LPM
757 LPM
0
20
40
60
80
100
120
140
160
180
200
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1893 LPM
1325 LPM
757 LPM
0
20
40
60
80
100
120
140
160
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
650-91040 6.5” 9:10 Lobes 4 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 158
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 675-23706.75" 2:3 Lobes 7 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 74.80 Tube OD 171.5 Rev per Unit Volume 0.20 Rev/LOverall Length 4928 Overall Length 5080 Flow Range 1136-2271
RPMEccentricity 12.37 Tube ID 139.70 No Load Pressure Loss 876 kPaContour Length 4775 Contour Length 4675 Speed Range 228-457
280XTHead Diameter 99.57 Side 1: 203.2 Max Pressure 5,523 kPa 6,904 kPaMajor Diameter 99.54 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
8,285 kPa 9,113 kPaHead Length 152.4 Side 2: 203.2 Max Torque 4,187 N-mWeight 174 Weight 349 Stall Pressure 8,836 kPa 11,046 kPa
N-m 5,234 N-m 6,281 N-m 6,909 13,255 kPa 14,580 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 6,699 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 8,374 N-m 10,049 N-m 11,054
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0T
21
4 OS 76.02 -1.23 76.23 -1.433
65
87
Reline Lengths (mm) Breen: Max 5080 Min 4775 Willis: Max
2/24/2015
- Min - Alternate Stator OD: - mm
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
0 2,000 4,000 6,000 8,000 10,000 12,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
3.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
2271 LPM
1703 LPM
1136 LPM
0
50
100
150
200
250
300
350
400
450
500
0 2,000 4,000 6,000 8,000 10,000 12,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
2271 LPM
1703 LPM
1136 LPM
0
50
100
150
200
250
300
350
0 2,000 4,000 6,000 8,000 10,000 12,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
675-2370 6.75” 2:3 Lobes 7 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 159
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 675-23806.75" 2:3 Lobes 8 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 76.71 Tube OD 171.5 Rev per Unit Volume 0.23 Rev/LOverall Length 5144 Overall Length 5334 Flow Range 1136-2271
RPMEccentricity 12.70 Tube ID 139.70 No Load Pressure Loss 721 kPaContour Length 4966 Contour Length 4953 Speed Range 262-525
280XTHead Diameter 88.90 Side 1: 190.5 Max Pressure 6,529 kPa 8,161 kPaMajor Diameter 102.11 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
9,794 kPa 10,773 kPaHead Length 177.8 Side 2: 190.5 Max Torque 4,310 N-mWeight 188 Weight 366 Stall Pressure 10,446 kPa 13,058 kPa
N-m 5,387 N-m 6,465 N-m 7,111 15,669 kPa 17,236 kPa
Thread Form 2 3/8" API Reg Material Alloy Steel Stall Torque 6,896 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 8,620 N-m 10,344 N-m 11,378
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 74.90 1.801.68 75.54 1.17T
75.0375.72 0.99
21
43
65
87
Reline Lengths (mm) Breen: Max - Min - Willis: Max
2/24/2015
5334 Min 5029 Alternate Stator OD: - mm
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
3.000
3.500
4.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
2271 LPM
1703 LPM
1136 LPM
0
100
200
300
400
500
600
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
2271 LPM
1703 LPM
1136 LPM
0
50
100
150
200
250
300
350
400
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
675-2380 6.75” 2:3 Lobes 8 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 160
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 675-45486.75" 4:5 Lobes 4.8 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 89.15 Tube OD 171.5 Rev per Unit Volume 0.13 Rev/LOverall Length 3594 Overall Length 3772 Flow Range 1136-2271
RPMEccentricity 9.02 Tube ID 139.70 No Load Pressure Loss 827 kPaContour Length 3412 Contour Length 3391 Speed Range 148-297
280XTHead Diameter 101.60 Side 1: 190.5 Max Pressure 3,951 kPa 4,939 kPaMajor Diameter 107.19 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
5,927 kPa 6,519 kPaHead Length 181.9 Side 2: 190.5 Max Torque 4,415 N-mWeight 184 Weight 254 Stall Pressure 6,321 kPa 7,902 kPa
N-m 5,518 N-m 6,622 N-m 7,284 9,482 kPa 10,430 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 7,063 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 8,830 N-m 10,595 N-m 11,655
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitS
WillisWillis Fit Breen Fit Willis Fit88.62 0.53 87.91 1.24
0 S OS 89.31 -0.1588.54 0.61 88.14 1.02
88.72 0.43-0.03 89.43 -0.28 89.64 -0.48T
89.1889.64 -0.48
21
43
65
87
Reline Lengths (mm) Breen: Max 3899 Min 3543 Willis: Max
2/24/2015
3886 Min 3467 Alternate Stator OD: 165.1/177.8 mm
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
3.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
2271 LPM
1703 LPM
1136 LPM
0
50
100
150
200
250
300
350
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
2271 LPM
1703 LPM
1136 LPM
0
50
100
150
200
250
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
675-4548 6.75” 4:5 Lobes 4.8 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 161
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 675-45506.75" 4:5 Lobes 5 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 91.36 Tube OD 171.5 Rev per Unit Volume 0.14 Rev/LOverall Length 3467 Overall Length 3708 Flow Range 757-1893
RPMEccentricity 9.19 Tube ID 139.70 No Load Pressure Loss 733 kPaContour Length 3269 Contour Length 3302 Speed Range 105-264
280XTHead Diameter 104.78 Side 1: 203.2 Max Pressure 4,247 kPa 5,309 kPaMajor Diameter 109.75 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
6,371 kPa 7,008 kPaHead Length 198.4 Side 2: 203.2 Max Torque 4,453 N-mWeight 185 Weight 248 Stall Pressure 6,795 kPa 8,494 kPa
N-m 5,566 N-m 6,679 N-m 7,347 10,192 kPa 11,212 kPa
Thread Form 2 3/8" API IF Material Alloy Steel Stall Torque 7,124 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 8,906 N-m 10,686 N-m 11,756
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 89.56 1.801.60 90.14 1.22T
89.7690.22 1.14
21
4 OS 91.21 0.15-0.03 91.74 -0.383
91.3991.80 -0.43
65
87
Reline Lengths (mm) Breen: Max - Min - Willis: Max
2/24/2015
3708 Min 3404 Alternate Stator OD: - mm
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
3.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1893 LPM
1325 LPM
757 LPM
0
50
100
150
200
250
300
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1893 LPM
1325 LPM
757 LPM
0
50
100
150
200
250
0 2,000 4,000 6,000 8,000 10,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
675-4550 6.75” 4:5 Lobes 5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 162
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 675-45706.75" 4:5 Lobes 7 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 89.15 Tube OD 171.5 Rev per Unit Volume 0.13 Rev/LOverall Length 5144 Overall Length 5334 Flow Range 1136-2271
RPMEccentricity 9.02 Tube ID 139.70 No Load Pressure Loss 828 kPaContour Length 4966 Contour Length 4953 Speed Range 149-298
280XTHead Diameter 101.60 Side 1: 190.5 Max Pressure 6,157 kPa 7,696 kPaMajor Diameter 107.19 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
9,236 kPa 10,159 kPaHead Length 177.8 Side 2: 190.5 Max Torque 6,869 N-mWeight 262 Weight 360 Stall Pressure 9,851 kPa 12,314 kPa
N-m 8,586 N-m 10,304 N-m 11,334 14,776 kPa 16,254 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 10,991 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 13,739 N-m 16,486 N-m 18,135
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitU/S S 88.54 0.61
WillisWillis Fit Breen Fit Willis Fit0.58 88.21 0.94 88.06 1.09
0 S OS 89.38 -0.2388.54 0.61 88.09 1.07 88.57
89.20 -0.05-0.18 89.31 -0.15 89.38 -0.23T
89.3389.66 -0.51
2 0.5-OS 1.5-OS 89.48 -0.33 89.41 -0.25-0.30 89.66 -0.51 89.79 -0.641
89.46
4 OS 2-OS 90.22 -1.07 89.66 -0.51-0.66 90.14 -0.99 90.22 -1.073
89.8190.42 -1.27
65
87
Reline Lengths (mm) Breen: Max 5451 Min 5095 Willis: Max
2/24/2015
5436 Min 5029 Alternate Stator OD: 165.1/177.8 mm
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
0 2,000 4,000 6,000 8,000 10,000 12,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
3.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
2271 LPM
1703 LPM
1136 LPM
0
50
100
150
200
250
300
350
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
2271 LPM
1703 LPM
1136 LPM
0
50
100
150
200
250
300
350
400
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
675-4570 6.75” 4:5 Lobes 7 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 163
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 675-5650 (A)6.75" 5:6 Lobes 5 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 90.72 Tube OD 171.5 Rev per Unit Volume 0.10 Rev/LOverall Length 4458 Overall Length 4610 Flow Range 1136-2271
RPMEccentricity 7.79 Tube ID 138.43 No Load Pressure Loss 916 kPaContour Length 4267 Contour Length 4172 Speed Range 114-228
280XTHead Diameter 108.84 Side 1: 219.1 Max Pressure 4,254 kPa 5,318 kPaMajor Diameter 106.30 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
6,381 kPa 7,019 kPaHead Length 190.5 Side 2: 219.1 Max Torque 6,045 N-mWeight 221 Weight 322 Stall Pressure 6,806 kPa 8,508 kPa
N-m 7,556 N-m 9,068 N-m 9,975 10,209 kPa 11,230 kPa
Thread Form 2 7/8" API IF Material Alloy Steel Stall Torque 9,672 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 12,091 N-m 14,508 N-m 15,959
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 89.99 0.720.52 90.70 0.01T
90.2090.73 -0.01
21
43
65
91.77 -1.05 91.11 -0.398
91.77 -1.05 91.29 -0.577 2-OS
Reline Lengths (mm) Breen: Max - Min - Willis: Max
2/24/2015
4610 Min 4305 Alternate Stator OD: - mm
0
2,000
4,000
6,000
8,000
10,000
12,000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
3.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
2271 LPM
1703 LPM
1136 LPM
0
50
100
150
200
250
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
2271 LPM
1703 LPM
1136 LPM
0
50
100
150
200
250
0 2,000 4,000 6,000 8,000 10,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
675-5650 (A) 6.75” 5:6 Lobes 5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 164
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 675-5650 (B)6.75" 5:6 Lobes 5 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 85.82 Tube OD 171.5 Rev per Unit Volume 0.05 Rev/LOverall Length 4826 Overall Length 4991 Flow Range 1136-2271
RPMEccentricity 7.46 Tube ID 139.70 No Load Pressure Loss 738 kPaContour Length 4674 Contour Length 4585 Speed Range 58-116
280XTHead Diameter 101.60 Side 1: 203.2 Max Pressure 3,985 kPa 4,981 kPaMajor Diameter 100.74 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
5,978 kPa 6,575 kPaHead Length 152.4 Side 2: 203.2 Max Torque 11,172 N-mWeight 234 Weight 289 Stall Pressure 6,376 kPa 7,970 kPa
N-m 13,965 N-m 16,758 N-m 18,433 9,564 kPa 10,520 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 17,875 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 22,344 N-m 26,813 N-m 29,493
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 86.13 -0.32 86.21 -0.39T
21
43
65
87
Reline Lengths (mm) Breen: Max 4991 Min 4724 Willis: Max
2/24/2015
- Min - Alternate Stator OD: - mm
0
5,000
10,000
15,000
20,000
25,000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
2271 LPM
1703 LPM
1136 LPM
0
20
40
60
80
100
120
140
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
2271 LPM
1703 LPM
1136 LPM
0
50
100
150
200
250
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
675-5650 (B) 6.75” 5:6 Lobes 5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 165
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 675-56686.75" 5:6 Lobes 6.8 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 93.73 Tube OD 171.5 Rev per Unit Volume 0.09 Rev/LOverall Length 5639 Overall Length 5766 Flow Range 1136-2271
RPMEccentricity 7.96 Tube ID 139.70 No Load Pressure Loss 1598 kPaContour Length 5420 Contour Length 5359 Speed Range 97-194
280XTHead Diameter 104.90 Side 1: 203.2 Max Pressure 5,405 kPa 6,756 kPaMajor Diameter 109.64 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
8,108 kPa 8,918 kPaHead Length 218.4 Side 2: 203.2 Max Torque 9,040 N-mWeight 316 Weight 402 Stall Pressure 8,648 kPa 10,810 kPa
N-m 11,300 N-m 13,560 N-m 14,916 12,972 kPa 14,269 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 14,464 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 18,081 N-m 21,697 N-m 23,866
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 93.45 0.28 93.27 0.46T
21
43
65
87
Reline Lengths (mm) Breen: Max 5766 Min 5486 Willis: Max
2/24/2015
- Min - Alternate Stator OD: 165.1 mm
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
0 2,000 4,000 6,000 8,000 10,000 12,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
2271 LPM
1703 LPM
1136 LPM
0
50
100
150
200
250
0 2,000 4,000 6,000 8,000 10,000 12,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
2271 LPM
1703 LPM
1136 LPM
0
50
100
150
200
250
300
0 2,000 4,000 6,000 8,000 10,000 12,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
675-5668 6.75” 5:6 Lobes 6.8 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 166
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 675-67506.75" 6:7 Lobes 5 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 94.98 Tube OD 171.5 Rev per Unit Volume 0.07 Rev/LOverall Length 4928 Overall Length 5080 Flow Range 1136-2271
RPMEccentricity 7.32 Tube ID 139.70 No Load Pressure Loss 901 kPaContour Length 4775 Contour Length 4712 Speed Range 85-170
280XTHead Diameter 101.60 Side 1: 184.2 Max Pressure 4,619 kPa 5,774 kPaMajor Diameter 109.62 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
6,929 kPa 7,621 kPaHead Length 152.4 Side 2: 184.2 Max Torque 8,631 N-mWeight 273 Weight 339 Stall Pressure 7,390 kPa 9,238 kPa
N-m 10,789 N-m 12,947 N-m 14,241 11,085 kPa 12,194 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 13,809 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 17,262 N-m 20,714 N-m 22,786
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitUS S 94.97 0.00
WillisWillis Fit Breen Fit Willis Fit0.23 94.69 0.28 94.49 0.49
0 S 95.25 -0.2794.87 0.11 94.54 0.44 94.74
95.10 -0.12T
21
OS 95.38 -0.40 94.89 0.084 OS 95.83 -0.86
95.48 -0.50 95.15 -0.1795.68 -0.71
3
6 2-OS 95.76 -0.78-0.99 95.99 -1.015
95.9696.37 -1.39-1.34
896.327 2-OS 96.19 -1.21
Reline Lengths (mm) Breen: Max 5080 Min 4724 Willis: Max
2/24/2015
5232 Min 4775 Alternate Stator OD: 165.1/177.8 mm
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
0 2,000 4,000 6,000 8,000 10,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
2271 LPM
1703 LPM
1136 LPM
0
20
40
60
80
100
120
140
160
180
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
2271 LPM
1703 LPM
1136 LPM
0
50
100
150
200
250
300
0 2,000 4,000 6,000 8,000 10,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
675-6750 6.75” 6:7 Lobes 5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 167
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 675-67606.75" 6:7 Lobes 6 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 94.98 Tube OD 171.5 Rev per Unit Volume 0.06 Rev/LOverall Length 6147 Overall Length 6350 Flow Range 1136-2271
RPMEccentricity 7.32 Tube ID 139.70 No Load Pressure Loss 1626 kPaContour Length 5994 Contour Length 5944 Speed Range 70-141
280XTHead Diameter 101.60 Side 1: 203.2 Max Pressure 5,309 kPa 6,636 kPaMajor Diameter 109.62 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
7,964 kPa 8,760 kPaHead Length 152.4 Side 2: 203.2 Max Torque 11,896 N-mWeight 336 Weight 441 Stall Pressure 8,494 kPa 10,618 kPa
N-m 14,870 N-m 17,844 N-m 19,628 12,741 kPa 14,015 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 19,033 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 23,792 N-m 28,549 N-m 31,404
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 95.25 -0.27 94.97 0.00T
21
4 OS 95.76 -0.78 95.63 -0.663
65
87
Reline Lengths (mm) Breen: Max 6350 Min 5994 Willis: Max
2/24/2015
- Min - Alternate Stator OD: 165.1 mm
0
5,000
10,000
15,000
20,000
25,000
0 2,000 4,000 6,000 8,000 10,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
1.800
2.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
2271 LPM
1703 LPM
1136 LPM
0
20
40
60
80
100
120
140
160
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
2271 LPM
1703 LPM
1136 LPM
0
50
100
150
200
250
300
0 2,000 4,000 6,000 8,000 10,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
675-6760 6.75” 6:7 Lobes 6 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 168
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 675-7820 (A)6.75" 7:8 Lobes 2 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 101.35 Tube OD 171.5 Rev per Unit Volume 0.04 Rev/LOverall Length 3734 Overall Length 3899 Flow Range 1136-2271
RPMEccentricity 6.48 Tube ID 139.70 No Load Pressure Loss 967 kPaContour Length 3546 Contour Length 3493 Speed Range 42-85
280XTHead Diameter 101.60 Side 1: 203.2 Max Pressure 1,289 kPa 1,611 kPaMajor Diameter 114.30 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,934 kPa 2,127 kPaHead Length 188.0 Side 2: 203.2 Max Torque 4,713 N-mWeight 248 Weight 256 Stall Pressure 2,062 kPa 2,578 kPa
N-m 5,891 N-m 7,070 N-m 7,777 3,093 kPa 3,402 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 7,540 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 9,426 N-m 11,310 N-m 12,440
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 100.56 0.790.61 101.17 0.18T
100.74101.04 0.30
21
43
65
87
Reline Lengths (mm) Breen: Max Min Willis: Max
2/24/2015
3899 Min 3594 Alternate Stator OD: 165.1 mm
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
0 500 1,000 1,500 2,000 2,500
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
2271 LPM
1703 LPM
1136 LPM
0
10
20
30
40
50
60
70
80
90
0 500 1,000 1,500 2,000 2,500 3,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
2271 LPM
1703 LPM
1136 LPM
0
10
20
30
40
50
60
70
0 500 1,000 1,500 2,000 2,500 3,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
675-7820 (A) 6.75” 7:8 Lobes 2 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 169
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 675-7820 (B)6.75" 7:8 Lobes 2 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 96.72 Tube OD 171.5 Rev per Unit Volume 0.03 Rev/LOverall Length 3734 Overall Length 3899 Flow Range 757-1893
RPMEccentricity 6.20 Tube ID 139.70 No Load Pressure Loss 1570 kPaContour Length 3564 Contour Length 3493 Speed Range 21-53
280XTHead Diameter 101.60 Side 1: 203.2 Max Pressure 710 kPa 888 kPaMajor Diameter 109.11 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,065 kPa 1,172 kPaHead Length 170.2 Side 2: 203.2 Max Torque 3,455 N-mWeight 205 Weight 262 Stall Pressure 1,136 kPa 1,420 kPa
N-m 4,319 N-m 5,183 N-m 5,701 1,704 kPa 1,874 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 5,528 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 6,910 N-m 8,293 N-m 9,120
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitUS 95.78 0.93
WillisWillis Fit Breen Fit Willis Fit0.93
0 S 96.57 0.1495.7896.34 0.37
T
21
43
65
87
Reline Lengths (mm) Breen: Max 3899 Min 3543 Willis: Max
2/24/2015
Min Alternate Stator OD: 165.1 mm
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
0 200 400 600 800 1,000 1,200 1,400
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
1.800
2.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
1893 LPM
1325 LPM
757 LPM
0
10
20
30
40
50
60
0 200 400 600 800 1,000 1,200 1,400
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
1893 LPM
1325 LPM
757 LPM
0
5
10
15
20
25
30
0 200 400 600 800 1,000 1,200 1,400
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
675-7820 (B) 6.75” 7:8 Lobes 2 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 170
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 675-78216.75" 7:8 Lobes 2.1 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 96.98 Tube OD 171.5 Rev per Unit Volume 0.03 Rev/LOverall Length 5613 Overall Length 5842 Flow Range 1136-2271
RPMEccentricity 5.68 Tube ID 134.87 No Load Pressure Loss 1174 kPaContour Length 5410 Contour Length 5385 Speed Range 35-70
280XTHead Diameter 101.60 Side 1: 228.6 Max Pressure 1,220 kPa 1,525 kPaMajor Diameter 108.33 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,830 kPa 2,013 kPaHead Length 203.2 Side 2: 228.6 Max Torque 5,358 N-mWeight 305 Weight 439 Stall Pressure 1,952 kPa 2,440 kPa
N-m 6,698 N-m 8,038 N-m 8,842 2,928 kPa 3,220 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 8,574 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 10,717 N-m 12,861 N-m 14,143
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 96.72 0.250.13 97.03 -0.05T
96.8597.10 -0.13
21
43
65
87
Reline Lengths (mm) Breen: Max - Min - Willis: Max
2/24/2015
5842 Min 5537 Alternate Stator OD: 177.8 mm
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
10,000
0 500 1,000 1,500 2,000 2,500
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
2271 LPM
1703 LPM
1136 LPM
0
10
20
30
40
50
60
70
80
0 500 1,000 1,500 2,000 2,500
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
2271 LPM
1703 LPM
1136 LPM
0
10
20
30
40
50
60
70
0 500 1,000 1,500 2,000 2,500
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
675-7821 6.75” 7:8 Lobes 2.1 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 171
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 675-7829 (B)6.75" 7:8 Lobes 2.9 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 96.72 Tube OD 171.5 Rev per Unit Volume 0.04 Rev/LOverall Length 5423 Overall Length 5588 Flow Range 1136-2271
RPMEccentricity 6.20 Tube ID 139.70 No Load Pressure Loss 1109 kPaContour Length 5245 Contour Length 5182 Speed Range 50-100
280XTHead Diameter 101.60 Side 1: 203.2 Max Pressure 2,282 kPa 2,853 kPaMajor Diameter 109.11 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
3,423 kPa 3,765 kPaHead Length 177.8 Side 2: 203.2 Max Torque 7,091 N-mWeight 296 Weight 379 Stall Pressure 3,651 kPa 4,564 kPa
N-m 8,864 N-m 10,637 N-m 11,701 5,476 kPa 6,024 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 11,346 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 14,183 N-m 17,017 N-m 18,720
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitS
WillisWillis Fit Breen Fit Willis Fit95.99 0.73 95.66 1.06
0 S 96.55 0.1796.29 0.43 95.94 0.78
96.42 0.30T
2 0.5-OS OS 96.90 -0.18 96.77 -0.05-0.08 97.05 -0.33 97.03 -0.311
96.8097.08 -0.36
43
97.92 -1.206
97.745 OS -1.02
87
Reline Lengths (mm) Breen: Max 5588 Min 5232 Willis: Max
2/24/2015
5588 Min 5283 Alternate Stator OD: 165.1 mm
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
0 1,000 2,000 3,000 4,000 5,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
2271 LPM
1703 LPM
1136 LPM
0
20
40
60
80
100
120
0 1,000 2,000 3,000 4,000 5,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
2271 LPM
1703 LPM
1136 LPM
0
20
40
60
80
100
120
140
0 1,000 2,000 3,000 4,000 5,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
675-7829 (B) 6.75” 7:8 Lobes 2.9 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 172
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 675-7830 (A)6.75" 7:8 Lobes 3 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 101.82 Tube OD 171.5 Rev per Unit Volume 0.07 Rev/LOverall Length 3010 Overall Length 3175 Flow Range 1136-2271
RPMEccentricity 6.50 Tube ID 139.70 No Load Pressure Loss 1003 kPaContour Length 2828 Contour Length 2807 Speed Range 84-169
280XTHead Diameter 101.60 Side 1: 184.2 Max Pressure 2,461 kPa 3,076 kPaMajor Diameter 114.81 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
3,692 kPa 4,061 kPaHead Length 181.9 Side 2: 184.2 Max Torque 4,524 N-mWeight 201 Weight 208 Stall Pressure 3,937 kPa 4,922 kPa
N-m 5,655 N-m 6,786 N-m 7,465 5,906 kPa 6,497 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 7,238 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 9,049 N-m 10,858 N-m 11,945
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitS
WillisWillis Fit Breen Fit Willis Fit101.09 0.72 100.56 1.26
0 S OS 101.90 -0.09101.07 0.75 100.76 1.05
101.47 0.340.11 101.78 0.04 101.85 -0.04T
101.70102.01 -0.19
21
4 OS 2-OS 102.69 -0.88 102.01 -0.19-0.37 102.69 -0.88 102.36 -0.553
102.18102.46 -0.65
65
87
Reline Lengths (mm) Breen: Max 3330 Min 2972 Willis: Max
2/24/2015
3327 Min 2870 Alternate Stator OD: 165.1 mm
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
0 1,000 2,000 3,000 4,000 5,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
2271 LPM
1703 LPM
1136 LPM
0
20
40
60
80
100
120
140
160
180
0 1,000 2,000 3,000 4,000 5,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
2271 LPM
1703 LPM
1136 LPM
0
20
40
60
80
100
120
140
0 1,000 2,000 3,000 4,000 5,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
675-7830 (A) 6.75” 7:8 Lobes 3 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 173
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 675-7830 (B)6.75" 7:8 Lobes 3 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 103.16 Tube OD 171.5 Rev per Unit Volume 0.04 Rev/LOverall Length 5017 Overall Length 5182 Flow Range 1136-2271
RPMEccentricity 6.45 Tube ID 139.70 No Load Pressure Loss 949 kPaContour Length 4829 Contour Length 4801 Speed Range 45-91
280XTHead Diameter 101.60 Side 1: 190.5 Max Pressure 2,461 kPa 3,076 kPaMajor Diameter 116.05 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
3,692 kPa 4,061 kPaHead Length 188.0 Side 2: 190.5 Max Torque 8,391 N-mWeight 343 Weight 339 Stall Pressure 3,937 kPa 4,922 kPa
N-m 10,489 N-m 12,587 N-m 13,846 5,906 kPa 6,497 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 13,424 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 16,783 N-m 20,138 N-m 22,153
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 102.41 0.750.67 102.74 0.42T
102.49102.84 0.32
21
43
65
87
Reline Lengths (mm) Breen: Max - Min - Willis: Max
2/24/2015
5182 Min 4877 Alternate Stator OD: 165.1 mm
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
0 1,000 2,000 3,000 4,000 5,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
2271 LPM
1703 LPM
1136 LPM
0
10
20
30
40
50
60
70
80
90
100
0 1,000 2,000 3,000 4,000 5,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
2271 LPM
1703 LPM
1136 LPM
0
20
40
60
80
100
120
140
0 1,000 2,000 3,000 4,000 5,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
675-7830 (B) 6.75” 7:8 Lobes 3 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 174
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 675-78336.75" 7:8 Lobes 3.3 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 101.35 Tube OD 171.5 Rev per Unit Volume 0.04 Rev/LOverall Length 6058 Overall Length 6223 Flow Range 1136-2271
RPMEccentricity 6.48 Tube ID 139.70 No Load Pressure Loss 967 kPaContour Length 5870 Contour Length 5817 Speed Range 42-85
280XTHead Diameter 101.60 Side 1: 203.2 Max Pressure 2,792 kPa 3,490 kPaMajor Diameter 114.30 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
4,188 kPa 4,607 kPaHead Length 188.0 Side 2: 203.2 Max Torque 10,209 N-mWeight 403 Weight 411 Stall Pressure 4,467 kPa 5,584 kPa
N-m 12,761 N-m 15,314 N-m 16,845 6,700 kPa 7,370 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 16,334 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 20,418 N-m 24,499 N-m 26,949
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S S 101.24 0.10 100.99 0.360.61 101.09 0.25 100.94 0.41T
100.74101.04 0.30
21
4 OS OS 102.18 -0.84 101.50 -0.15-0.30 102.06 -0.71 101.98 -0.633
101.65102.01 -0.66
65
87
Reline Lengths (mm) Breen: Max 6223 Min 5857 Willis: Max
2/24/2015
6223 Min 5918 Alternate Stator OD: 165.1/177.8 mm
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
20,000
0 1,000 2,000 3,000 4,000 5,000 6,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
2271 LPM
1703 LPM
1136 LPM
0
10
20
30
40
50
60
70
80
90
0 1,000 2,000 3,000 4,000 5,000 6,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
2271 LPM
1703 LPM
1136 LPM
0
20
40
60
80
100
120
140
160
0 1,000 2,000 3,000 4,000 5,000 6,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
675-7833 6.75” 7:8 Lobes 3.3 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 175
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 675-78356.75" 7:8 Lobes 3.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 105.28 Tube OD 171.5 Rev per Unit Volume 0.04 Rev/LOverall Length 6401 Overall Length 6604 Flow Range 1136-2271
RPMEccentricity 6.27 Tube ID 139.70 No Load Pressure Loss 979 kPaContour Length 6223 Contour Length 6223 Speed Range 42-85
280XTHead Diameter 101.60 Side 1: 203.2 Max Pressure 3,096 kPa 3,870 kPaMajor Diameter 117.83 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
4,644 kPa 5,108 kPaHead Length 177.8 Side 2: 203.2 Max Torque 11,062 N-mWeight 408 Weight 440 Stall Pressure 4,953 kPa 6,192 kPa
N-m 13,828 N-m 16,593 N-m 18,253 7,430 kPa 8,173 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 17,698 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 22,125 N-m 26,548 N-m 29,203
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 105.08 0.20-0.03 105.33 -0.05T
105.31105.38 -0.10
21
43
65
87
Reline Lengths (mm) Breen: Max - Min - Willis: Max
2/24/2015
6604 Min 6299 Alternate Stator OD: 165.1 mm
0
5,000
10,000
15,000
20,000
25,000
0 1,000 2,000 3,000 4,000 5,000 6,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
1.800
2.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
2271 LPM
1703 LPM
1136 LPM
0
10
20
30
40
50
60
70
80
90
100
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
2271 LPM
1703 LPM
1136 LPM
0
20
40
60
80
100
120
140
160
180
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
675-7835 6.75” 7:8 Lobes 3.5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 176
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 675-78506.75" 7:8 Lobes 5 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 101.82 Tube OD 171.5 Rev per Unit Volume 0.07 Rev/LOverall Length 4775 Overall Length 4940 Flow Range 1136-2271
RPMEccentricity 6.50 Tube ID 139.70 No Load Pressure Loss 994 kPaContour Length 4597 Contour Length 4572 Speed Range 83-167
280XTHead Diameter 101.60 Side 1: 184.2 Max Pressure 4,654 kPa 5,818 kPaMajor Diameter 114.81 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
6,981 kPa 7,679 kPaHead Length 177.8 Side 2: 184.2 Max Torque 8,622 N-mWeight 319 Weight 326 Stall Pressure 7,446 kPa 9,308 kPa
N-m 10,777 N-m 12,933 N-m 14,226 11,169 kPa 12,286 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 13,794 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 17,244 N-m 20,692 N-m 22,761
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitUS S 101.45 0.37
WillisWillis Fit Breen Fit Willis Fit0.55 101.04 0.77 100.74 1.08
0 S OS 101.75 0.06101.14 0.67 100.86 0.95 101.27
101.45 0.370.17 101.63 0.19 101.63 0.19T
101.65101.96 -0.14
21
4 OS 2-OS 102.54 -0.72 102.21 -0.39-0.50 102.41 -0.60 102.24 -0.423
102.31102.64 -0.83
65
-1.318
103.127 2-OS 103.33 -1.51
Reline Lengths (mm) Breen: Max 4930 Min 4623 Willis: Max
2/24/2015
5182 Min 4636 Alternate Stator OD: 165.1/177.8 mm
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
0 2,000 4,000 6,000 8,000 10,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
2271 LPM
1703 LPM
1136 LPM
0
20
40
60
80
100
120
140
160
180
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
2271 LPM
1703 LPM
1136 LPM
0
50
100
150
200
250
0 2,000 4,000 6,000 8,000 10,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
675-7850 6.75” 7:8 Lobes 5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 177
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 675-78576.75" 7:8 Lobes 5.7 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 105.43 Tube OD 171.5 Rev per Unit Volume 0.06 Rev/LOverall Length 6396 Overall Length 6604 Flow Range 1136-2271
RPMEccentricity 6.25 Tube ID 139.70 No Load Pressure Loss 985 kPaContour Length 6218 Contour Length 6198 Speed Range 70-140
280XTHead Diameter 114.30 Side 1: 203.2 Max Pressure 5,585 kPa 6,981 kPaMajor Diameter 117.93 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
8,378 kPa 9,215 kPaHead Length 177.8 Side 2: 203.2 Max Torque 12,387 N-mWeight 417 Weight 437 Stall Pressure 8,936 kPa 11,170 kPa
N-m 15,484 N-m 18,581 N-m 20,440 13,404 kPa 14,744 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 19,820 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 24,775 N-m 29,730 N-m 32,703
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S S 105.23 0.19 105.18 0.240.37 105.05 0.37 105.08 0.35T
105.05105.31 0.12
21
4 OS 105.61 -0.19 105.56 -0.143
65
87
Reline Lengths (mm) Breen: Max 6607 Min 6299 Willis: Max
2/24/2015
6604 Min 6299 Alternate Stator OD: 177.8 mm
0
5,000
10,000
15,000
20,000
25,000
0 2,000 4,000 6,000 8,000 10,000 12,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
1.800
2.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
2271 LPM
1703 LPM
1136 LPM
0
20
40
60
80
100
120
140
160
0 2,000 4,000 6,000 8,000 10,000 12,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
2271 LPM
1703 LPM
1136 LPM
0
50
100
150
200
250
300
0 2,000 4,000 6,000 8,000 10,000 12,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
675-7857 6.75” 7:8 Lobes 5.7 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 178
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 675-7864 (A)6.75" 7:8 Lobes 6.4 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 101.82 Tube OD 171.5 Rev per Unit Volume 0.07 Rev/LOverall Length 6058 Overall Length 6223 Flow Range 1136-2271
RPMEccentricity 6.50 Tube ID 139.70 No Load Pressure Loss 989 kPaContour Length 5880 Contour Length 5855 Speed Range 83-166
280XTHead Diameter 101.60 Side 1: 184.2 Max Pressure 6,247 kPa 7,809 kPaMajor Diameter 114.81 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
9,371 kPa 10,308 kPaHead Length 177.8 Side 2: 184.2 Max Torque 11,632 N-mWeight 405 Weight 412 Stall Pressure 9,995 kPa 12,494 kPa
N-m 14,541 N-m 17,449 N-m 19,194 14,992 kPa 16,492 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 18,612 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 23,265 N-m 27,917 N-m 30,710
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 100.99 0.830.70 101.55 0.27T
101.12101.52 0.29
21
4 OS 101.80 0.01-0.14 101.90 -0.093
101.96102.31 -0.50
65
102.82 -1.00 102.46 -0.658
102.84 -1.03 102.49 -0.677 2-OS
Reline Lengths (mm) Breen: Max - Min - Willis: Max
2/24/2015
6223 Min 5918 Alternate Stator OD: 165.1/177.8 mm
0
5,000
10,000
15,000
20,000
25,000
0 2,000 4,000 6,000 8,000 10,000 12,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
2271 LPM
1703 LPM
1136 LPM
0
20
40
60
80
100
120
140
160
180
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
2271 LPM
1703 LPM
1136 LPM
0
50
100
150
200
250
300
350
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
675-7864 (A) 6.75” 7:8 Lobes 6.4 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 179
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 675-7864 (B)6.75" 7:8 Lobes 6.4 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 100.07 Tube OD 171.5 Rev per Unit Volume 0.07 Rev/LOverall Length 5906 Overall Length 6350 Flow Range 1136-2271
RPMEccentricity 6.16 Tube ID 139.70 No Load Pressure Loss 1083 kPaContour Length 5728 Contour Length 5944 Speed Range 75-151
280XTHead Diameter 101.60 Side 1: 203.2 Max Pressure 6,605 kPa 8,256 kPaMajor Diameter 112.40 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
9,908 kPa 10,898 kPaHead Length 177.8 Side 2: 203.2 Max Torque 13,523 N-mWeight 355 Weight 423 Stall Pressure 10,568 kPa 13,210 kPa
N-m 16,904 N-m 20,285 N-m 22,314 15,852 kPa 17,437 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 21,638 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 27,047 N-m 32,457 N-m 35,702
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 100.30 -0.24 100.13 -0.06T
21
43
65
87
Reline Lengths (mm) Breen: Max 6353 Min 6045 Willis: Max
2/24/2015
- Min - Alternate Stator OD: 177.8 mm
0
5,000
10,000
15,000
20,000
25,000
30,000
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
1.800
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
2271 LPM
1703 LPM
1136 LPM
0
20
40
60
80
100
120
140
160
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
2271 LPM
1703 LPM
1136 LPM
0
50
100
150
200
250
300
350
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
675-7864 (B) 6.75” 7:8 Lobes 6.4 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 180
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 675-910356.75" 9:10 Lobes 3.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 101.18 Tube OD 171.5 Rev per Unit Volume 0.05 Rev/LOverall Length 5201 Overall Length 5334 Flow Range 946-2082
RPMEccentricity 5.04 Tube ID 139.70 No Load Pressure Loss 1149 kPaContour Length 4997 Contour Length 4928 Speed Range 45-99
280XTHead Diameter 107.95 Side 1: 203.2 Max Pressure 3,089 kPa 3,861 kPaMajor Diameter 111.25 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
4,634 kPa 5,097 kPaHead Length 203.2 Side 2: 203.2 Max Torque 8,415 N-mWeight 307 Weight 361 Stall Pressure 4,942 kPa 6,178 kPa
N-m 10,519 N-m 12,622 N-m 13,885 7,413 kPa 8,154 kPa
Thread Form 2 7/8" API IF Material Alloy Steel Stall Torque 13,463 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 16,830 N-m 20,195 N-m 22,213
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 100.74 0.440.32 101.27 -0.09T
100.86101.14 0.04
21
43
65
87
Reline Lengths (mm) Breen: Max - Min - Willis: Max
2/24/2015
5334 Min 5029 Alternate Stator OD: - mm
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
0 1,000 2,000 3,000 4,000 5,000 6,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
2082 LPM
1514 LPM
946 LPM
0
20
40
60
80
100
120
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
2082 LPM
1514 LPM
946 LPM
0
20
40
60
80
100
120
140
160
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
675-91035 6.75” 9:10 Lobes 3.5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 181
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 675-910406.75" 9:10 Lobes 4 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 102.49 Tube OD 171.5 Rev per Unit Volume 0.05 Rev/LOverall Length 3658 Overall Length 3780 Flow Range 1136-2271
RPMEccentricity 5.12 Tube ID 139.70 No Load Pressure Loss 1028 kPaContour Length 3531 Contour Length 3373 Speed Range 60-120
280XTHead Diameter 105.92 Side 1: 203.2 Max Pressure 3,813 kPa 4,766 kPaMajor Diameter 112.73 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
5,720 kPa 6,291 kPaHead Length 127.0 Side 2: 203.2 Max Torque 9,356 N-mWeight 237 Weight 235 Stall Pressure 6,100 kPa 7,626 kPa
N-m 11,695 N-m 14,034 N-m 15,438 9,151 kPa 10,066 kPa
Thread Form 2 7/8" API IF Material Alloy Steel Stall Torque 14,968 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 18,713 N-m 22,455 N-m 24,700
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0T
2 S 103.07 -0.58 103.12 -0.631
43
65
87
Reline Lengths (mm) Breen: Max 3782 Min 3607 Willis: Max
2/24/2015
- Min - Alternate Stator OD: - mm
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
1.800
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
2271 LPM
1703 LPM
1136 LPM
0
20
40
60
80
100
120
140
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
2271 LPM
1703 LPM
1136 LPM
0
20
40
60
80
100
120
140
160
180
200
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
675-91040 6.75” 9:10 Lobes 4 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 182
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 700-78607" 7:8 Lobes 6 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 103.88 Tube OD 177.8 Rev per Unit Volume 0.11 Rev/LOverall Length 4851 Overall Length 5080 Flow Range 1136-2271
RPMEccentricity 6.56 Tube ID 146.05 No Load Pressure Loss 1507 kPaContour Length 4674 Contour Length 4674 Speed Range 126-252
280XTHead Diameter 111.25 Side 1: 203.2 Max Pressure 5,378 kPa 6,723 kPaMajor Diameter 117.01 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
8,067 kPa 8,874 kPaHead Length 177.8 Side 2: 203.2 Max Torque 6,633 N-mWeight 320 Weight 358 Stall Pressure 8,604 kPa 10,756 kPa
N-m 8,292 N-m 9,950 N-m 10,945 12,907 kPa 14,197 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 10,613 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 13,267 N-m 15,921 N-m 17,512
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 104.22 -0.34 104.27 -0.39T
21
4 OS 104.65 -0.77 104.67 -0.793
105.49 -1.616
105.495 1.5-OS -1.61
87
Reline Lengths (mm) Breen: Max 5080 Min 4724 Willis: Max
2/24/2015
- Min - Alternate Stator OD: - mm
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
0 2,000 4,000 6,000 8,000 10,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
1.800
2.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
2271 LPM
1703 LPM
1136 LPM
0
50
100
150
200
250
300
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
2271 LPM
1703 LPM
1136 LPM
0
50
100
150
200
250
300
0 2,000 4,000 6,000 8,000 10,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
700-7860 7” 7:8 Lobes 6 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 183
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 700-78757" 7:8 Lobes 7.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 103.88 Tube OD 177.8 Rev per Unit Volume 0.08 Rev/LOverall Length 6121 Overall Length 6248 Flow Range 1136-2271
RPMEccentricity 6.56 Tube ID 146.05 No Load Pressure Loss 970 kPaContour Length 5944 Contour Length 5779 Speed Range 92-184
280XTHead Diameter 111.25 Side 1: 235.0 Max Pressure 7,536 kPa 9,420 kPaMajor Diameter 117.01 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
11,304 kPa 12,434 kPaHead Length 177.8 Side 2: 235.0 Max Torque 12,674 N-mWeight 407 Weight 438 Stall Pressure 12,057 kPa 15,072 kPa
N-m 15,842 N-m 19,011 N-m 20,912 18,086 kPa 19,895 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 20,277 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 25,348 N-m 30,417 N-m 33,459
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S OS 104.04 -0.16 103.89 -0.01-0.16 103.86 0.02 104.34 -0.46T
104.04104.27 -0.39
21
4 OS 104.65 -0.77 104.39 -0.513
65
87
Reline Lengths (mm) Breen: Max 6350 Min 5994 Willis: Max
2/24/2015
6248 Min 5944 Alternate Stator OD: - mm
0
5,000
10,000
15,000
20,000
25,000
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
2271 LPM
1703 LPM
1136 LPM
0
20
40
60
80
100
120
140
160
180
200
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
2271 LPM
1703 LPM
1136 LPM
0
50
100
150
200
250
300
350
400
450
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
700-7875 7” 7:8 Lobes 7.5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 184
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 725-56507.25" 5:6 Lobes 5 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 103.38 Tube OD 184.2 Rev per Unit Volume 0.08 Rev/LOverall Length 4343 Overall Length 4521 Flow Range 1136-2271
RPMEccentricity 8.57 Tube ID 152.40 No Load Pressure Loss 837 kPaContour Length 4166 Contour Length 4140 Speed Range 95-191
280XTHead Diameter 101.60 Side 1: 190.5 Max Pressure 4,378 kPa 5,473 kPaMajor Diameter 120.52 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
6,567 kPa 7,224 kPaHead Length 177.8 Side 2: 190.5 Max Torque 7,431 N-mWeight 285 Weight 332 Stall Pressure 7,004 kPa 8,756 kPa
N-m 9,289 N-m 11,147 N-m 12,262 10,507 kPa 11,557 kPa
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 11,889 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 14,863 N-m 17,835 N-m 19,618
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 102.01 1.371.17 102.49 0.89T
102.21102.87 0.51
21
4 OS 103.35 0.03-0.18 103.81 -0.433
103.56103.68 -0.30
65
87
Reline Lengths (mm) Breen: Max - Min - Willis: Max
2/24/2015
4521 Min 4216 Alternate Stator OD: - mm
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
0 2,000 4,000 6,000 8,000 10,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
3.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
2271 LPM
1703 LPM
1136 LPM
0
50
100
150
200
250
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
2271 LPM
1703 LPM
1136 LPM
0
50
100
150
200
250
0 2,000 4,000 6,000 8,000 10,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
725-5650 7.25” 5:6 Lobes 5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 185
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 725-78777.25" 7:8 Lobes 7.7 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 109.84 Tube OD 184.2 Rev per Unit Volume 0.08 Rev/LOverall Length 6061 Overall Length 6223 Flow Range 1136-2271
RPMEccentricity 6.83 Tube ID 149.23 No Load Pressure Loss 950 kPaContour Length 5867 Contour Length 5817 Speed Range 91-182
280XTHead Diameter 114.30 Side 1: 190.5 Max Pressure 7,750 kPa 9,688 kPaMajor Diameter 123.49 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
11,625 kPa 12,788 kPaHead Length 194.1 Side 2: 190.5 Max Torque 13,231 N-mWeight 444 Weight 485 Stall Pressure 12,400 kPa 15,500 kPa
N-m 16,539 N-m 19,847 N-m 21,832 18,600 kPa 20,460 kPa
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 21,171 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 26,463 N-m 31,756 N-m 34,932
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 108.59 1.261.10 109.07 0.77T
108.74109.04 0.80
21
43
65
87
Reline Lengths (mm) Breen: Max - Min - Willis: Max
2/24/2015
6223 Min 5918 Alternate Stator OD: - mm
0
5,000
10,000
15,000
20,000
25,000
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
2271 LPM
1703 LPM
1136 LPM
0
20
40
60
80
100
120
140
160
180
200
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
2271 LPM
1703 LPM
1136 LPM
0
50
100
150
200
250
300
350
400
450
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
725-7877 7.25” 7:8 Lobes 7.7 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 186
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 775-6740 (A)7.75" 6:7 Lobes 4 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 113.16 Tube OD 196.9 Rev per Unit Volume 0.07 Rev/LOverall Length 3302 Overall Length 3505 Flow Range 1136-3407
RPMEccentricity 8.29 Tube ID 158.75 No Load Pressure Loss 1077 kPaContour Length 3122 Contour Length 3099 Speed Range 84-252
280XTHead Diameter 114.30 Side 1: 203.2 Max Pressure 3,268 kPa 4,085 kPaMajor Diameter 129.74 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
4,902 kPa 5,392 kPaHead Length 180.3 Side 2: 203.2 Max Torque 6,178 N-mWeight 276 Weight 315 Stall Pressure 5,228 kPa 6,536 kPa
N-m 7,722 N-m 9,267 N-m 10,193 7,843 kPa 8,627 kPa
Thread Form 3 1/2" API Reg Material Alloy Steel Stall Torque 9,883 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 12,356 N-m 14,827 N-m 16,309
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 111.61 1.551.40 112.37 0.79T
111.76112.34 0.81
21
43
65
87
Reline Lengths (mm) Breen: Max - Min - Willis: Max
2/24/2015
3505 Min 3200 Alternate Stator OD: 203.2 mm
0
2,000
4,000
6,000
8,000
10,000
12,000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
3.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
3407 LPM
2271 LPM
1136 LPM
0
50
100
150
200
250
300
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
3407 LPM
2271 LPM
1136 LPM
0
50
100
150
200
250
300
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
775-6740 (A) 7.75” 6:7 Lobes 4 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 187
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 775-910307.75" 9:10 Lobes 3 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 116.59 Tube OD 196.9 Rev per Unit Volume 0.06 Rev/LOverall Length 2692 Overall Length 2845 Flow Range 1136-2271
RPMEccentricity 5.94 Tube ID 158.75 No Load Pressure Loss 1051 kPaContour Length 2522 Contour Length 2438 Speed Range 69-138
280XTHead Diameter 120.65 Side 1: 203.2 Max Pressure 2,496 kPa 3,120 kPaMajor Diameter 128.47 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
3,744 kPa 4,118 kPaHead Length 170.2 Side 2: 203.2 Max Torque 5,349 N-mWeight 236 Weight 257 Stall Pressure 3,993 kPa 4,992 kPa
N-m 6,686 N-m 8,023 N-m 8,826 5,990 kPa 6,589 kPa
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 8,557 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 10,698 N-m 12,837 N-m 14,121
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 115.54 1.040.94 115.87 0.71T
115.65116.08 0.51
21
43
65
87
Reline Lengths (mm) Breen: Max - Min - Willis: Max
2/24/2015
2845 Min 2540 Alternate Stator OD: 203.2 mm
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
10,000
0 1,000 2,000 3,000 4,000 5,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
2271 LPM
1703 LPM
1136 LPM
0
20
40
60
80
100
120
140
160
0 1,000 2,000 3,000 4,000 5,000 6,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
2271 LPM
1703 LPM
1136 LPM
0
20
40
60
80
100
120
140
0 1,000 2,000 3,000 4,000 5,000 6,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
775-91030 7.75” 9:10 Lobes 3 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 188
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 800-45338" 4:5 Lobes 3.3 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 102.62 Tube OD 203.2 Rev per Unit Volume 0.07 Rev/LOverall Length 3708 Overall Length 3810 Flow Range 1136-3407
RPMEccentricity 10.36 Tube ID 155.96 No Load Pressure Loss 926 kPaContour Length 3355 Contour Length 3378 Speed Range 77-231
280XTHead Diameter 115.57 Side 1: 215.9 Max Pressure 2,386 kPa 2,983 kPaMajor Diameter 123.34 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
3,579 kPa 3,937 kPaHead Length 353.8 Side 2: 215.9 Max Torque 5,135 N-mWeight 253 Weight 426 Stall Pressure 3,817 kPa 4,772 kPa
N-m 6,419 N-m 7,703 N-m 8,473 5,726 kPa 6,299 kPa
Thread Form 3 1/2" API Reg Material Alloy Steel Stall Torque 8,215 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 10,270 N-m 12,324 N-m 13,557
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 101.40 1.220.99 102.03 0.58T
101.63102.08 0.53
21
43
65
87
Reline Lengths (mm) Breen: Max - Min - Willis: Max
2/24/2015
5791 Min 5486 Alternate Stator OD: - mm
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
10,000
0 1,000 2,000 3,000 4,000 5,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
3.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
3407 LPM
2271 LPM
1136 LPM
0
50
100
150
200
250
0 1,000 2,000 3,000 4,000 5,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
3407 LPM
2271 LPM
1136 LPM
0
50
100
150
200
250
0 1,000 2,000 3,000 4,000 5,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
800-4533 8” 4:5 Lobes 3.3 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 189
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 800-45368" 4:5 Lobes 3.6 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 104.38 Tube OD 203.2 Rev per Unit Volume 0.07 Rev/LOverall Length 3901 Overall Length 4064 Flow Range 1136-3407
RPMEccentricity 10.55 Tube ID 158.75 No Load Pressure Loss 915 kPaContour Length 3724 Contour Length 3658 Speed Range 75-226
280XTHead Diameter 120.65 Side 1: 203.2 Max Pressure 2,668 kPa 3,335 kPaMajor Diameter 125.49 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
4,002 kPa 4,402 kPaHead Length 177.8 Side 2: 203.2 Max Torque 5,883 N-mWeight 274 Weight 434 Stall Pressure 4,268 kPa 5,336 kPa
N-m 7,353 N-m 8,824 N-m 9,707 6,403 kPa 7,043 kPa
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 9,411 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 11,766 N-m 14,119 N-m 15,530
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitS
WillisWillis Fit Breen Fit Willis Fit103.61 0.77 102.90 1.48
0 S OS 104.34 0.04103.81 0.57 103.12 1.26
104.04 0.34-0.01 104.24 0.14 104.70 -0.32T
104.39104.83 -0.45
21
43
65
87
Reline Lengths (mm) Breen: Max 4267 Min 3912 Willis: Max
2/24/2015
4267 Min 3759 Alternate Stator OD: 196.9/209.6 mm
0
2,000
4,000
6,000
8,000
10,000
12,000
0 1,000 2,000 3,000 4,000 5,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
3.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
3407 LPM
2271 LPM
1136 LPM
0
50
100
150
200
250
0 1,000 2,000 3,000 4,000 5,000 6,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
3407 LPM
2271 LPM
1136 LPM
0
50
100
150
200
250
0 1,000 2,000 3,000 4,000 5,000 6,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
800-4536 8” 4:5 Lobes 3.6 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 190
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 800-45538" 4:5 Lobes 5.3 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 104.38 Tube OD 203.2 Rev per Unit Volume 0.07 Rev/LOverall Length 5613 Overall Length 5791 Flow Range 1136-3407
RPMEccentricity 10.55 Tube ID 158.75 No Load Pressure Loss 916 kPaContour Length 5436 Contour Length 5385 Speed Range 75-226
280XTHead Diameter 120.65 Side 1: 203.2 Max Pressure 4,364 kPa 5,455 kPaMajor Diameter 125.49 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
6,546 kPa 7,201 kPaHead Length 177.8 Side 2: 203.2 Max Torque 9,618 N-mWeight 392 Weight 620 Stall Pressure 6,982 kPa 8,728 kPa
N-m 12,023 N-m 14,427 N-m 15,870 10,473 kPa 11,520 kPa
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 15,388 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 19,237 N-m 23,083 N-m 25,391
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitS
WillisWillis Fit Breen Fit Willis Fit103.38 1.00 103.05 1.33
0 S 103.91 0.47103.66 0.72 103.25 1.13
103.81 0.57T
21
4 OS 104.37 0.01-0.09 104.85 -0.473
104.47104.90 -0.52
65
-1.778
106.157 2-OS 106.15 -1.77
Reline Lengths (mm) Breen: Max 5791 Min 5486 Willis: Max
2/24/2015
5791 Min 5486 Alternate Stator OD: 196.9/209.6 mm
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
0 2,000 4,000 6,000 8,000 10,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
3.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
3407 LPM
2271 LPM
1136 LPM
0
50
100
150
200
250
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
3407 LPM
2271 LPM
1136 LPM
0
50
100
150
200
250
300
350
400
0 2,000 4,000 6,000 8,000 10,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
800-4553 8” 4:5 Lobes 5.3 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 191
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 800-56308" 5:6 Lobes 3 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 104.18 Tube OD 203.2 Rev per Unit Volume 0.05 Rev/LOverall Length 2667 Overall Length 2835 Flow Range 1893-3407
RPMEccentricity 9.69 Tube ID 158.75 No Load Pressure Loss 1351 kPaContour Length 2489 Contour Length 2454 Speed Range 96-174
280XTHead Diameter 120.65 Side 1: 203.2 Max Pressure 1,979 kPa 2,474 kPaMajor Diameter 123.57 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
2,969 kPa 3,265 kPaHead Length 177.8 Side 2: 203.2 Max Torque 5,535 N-mWeight 176 Weight 288 Stall Pressure 3,166 kPa 3,958 kPa
N-m 6,919 N-m 8,303 N-m 9,133 4,749 kPa 5,224 kPa
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 8,855 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 11,071 N-m 13,283 N-m 14,612
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 104.19 -0.01 104.04 0.14T
21
43
65
87
Reline Lengths (mm) Breen: Max 2835 Min 2530 Willis: Max
2/24/2015
- Min - Alternate Stator OD: - mm
0
2,000
4,000
6,000
8,000
10,000
12,000
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
3407 LPM
2650 LPM
1893 LPM
0
20
40
60
80
100
120
140
160
180
200
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
3407 LPM
2650 LPM
1893 LPM
0
20
40
60
80
100
120
140
160
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
800-5630 8” 5.6 Lobes 3 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 192
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 800-56508" 5:6 Lobes 5 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 104.18 Tube OD 203.2 Rev per Unit Volume 0.05 Rev/LOverall Length 4115 Overall Length 4267 Flow Range 1893-3407
RPMEccentricity 9.69 Tube ID 158.75 No Load Pressure Loss 1351 kPaContour Length 3937 Contour Length 3861 Speed Range 96-174
280XTHead Diameter 120.65 Side 1: 203.2 Max Pressure 3,882 kPa 4,853 kPaMajor Diameter 123.57 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
5,823 kPa 6,405 kPaHead Length 177.8 Side 2: 203.2 Max Torque 10,858 N-mWeight 268 Weight 433 Stall Pressure 6,211 kPa 7,764 kPa
N-m 13,573 N-m 16,287 N-m 17,916 9,316 kPa 10,248 kPa
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 17,373 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 21,717 N-m 26,058 N-m 28,665
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 104.19 -0.01 104.04 0.14T
21
43
65
87
Reline Lengths (mm) Breen: Max 4267 Min 3962 Willis: Max
2/24/2015
- Min - Alternate Stator OD: 196.9 mm
0
5,000
10,000
15,000
20,000
25,000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
3407 LPM
2650 LPM
1893 LPM
0
20
40
60
80
100
120
140
160
180
200
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
3407 LPM
2650 LPM
1893 LPM
0
50
100
150
200
250
300
350
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
800-5650 8” 5:6 Lobes 5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 193
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 800-6740 (B)8" 6:7 Lobes 4 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 108.85 Tube OD 203.2 Rev per Unit Volume 0.04 Rev/LOverall Length 5055 Overall Length 5232 Flow Range 1136-3407
RPMEccentricity 8.54 Tube ID 158.75 No Load Pressure Loss 962 kPaContour Length 4877 Contour Length 4826 Speed Range 45-137
280XTHead Diameter 120.65 Side 1: 203.2 Max Pressure 3,406 kPa 4,258 kPaMajor Diameter 125.93 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
5,109 kPa 5,620 kPaHead Length 177.8 Side 2: 203.2 Max Torque 11,853 N-mWeight 449 Weight 547 Stall Pressure 5,449 kPa 6,812 kPa
N-m 14,817 N-m 17,780 N-m 19,558 8,174 kPa 8,991 kPa
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 18,963 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 23,707 N-m 28,447 N-m 31,290
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitUS 108.41 0.44
WillisWillis Fit Breen Fit Willis Fit0.44
0 S OS 108.97 -0.11108.41
108.33 0.520.42 108.92 -0.06 108.66 0.19T
108.43108.81 0.04
21
4 OS 109.65 -0.80 109.68 -0.833
65
87
Reline Lengths (mm) Breen: Max 5235 Min 4874 Willis: Max
2/24/2015
5232 Min 4928 Alternate Stator OD: 196.9 mm
0
5,000
10,000
15,000
20,000
25,000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
3.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
3407 LPM
2271 LPM
1136 LPM
0
20
40
60
80
100
120
140
160
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
3407 LPM
2271 LPM
1136 LPM
0
50
100
150
200
250
300
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
800-6740 (B) 8” 6:7 Lobes 4 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 194
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 800-67508" 6:7 Lobes 5 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 108.85 Tube OD 203.2 Rev per Unit Volume 0.03 Rev/LOverall Length 6198 Overall Length 6350 Flow Range 1136-3407
RPMEccentricity 8.54 Tube ID 158.75 No Load Pressure Loss 1645 kPaContour Length 6020 Contour Length 5944 Speed Range 31-95
280XTHead Diameter 120.65 Side 1: 203.2 Max Pressure 3,744 kPa 4,680 kPaMajor Diameter 125.94 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
5,616 kPa 6,178 kPaHead Length 177.8 Side 2: 203.2 Max Torque 18,657 N-mWeight 441 Weight 643 Stall Pressure 5,990 kPa 7,488 kPa
N-m 23,321 N-m 27,985 N-m 30,784 8,985 kPa 9,884 kPa
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 29,849 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 37,314 N-m 44,774 N-m 49,254
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 108.94 -0.09 108.86 -0.01T
21
43
65
-1.878
110.727 2-OS 110.72 -1.87
Reline Lengths (mm) Breen: Max 6353 Min 6002 Willis: Max
2/24/2015
- Min - Alternate Stator OD: - mm
0
5,000
10,000
15,000
20,000
25,000
30,000
35,000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
3.000
3.500
4.000
4.500
5.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
3407 LPM
2271 LPM
1136 LPM
0
20
40
60
80
100
120
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
3407 LPM
2271 LPM
1136 LPM
0
50
100
150
200
250
300
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
800-6750 8” 6:7 Lobes 5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 195
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 800-78208" 7:8 Lobes 2 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 110.36 Tube OD 203.2 Rev per Unit Volume 0.01 Rev/LOverall Length 3901 Overall Length 4267 Flow Range 1136-3407
RPMEccentricity 7.27 Tube ID 158.75 No Load Pressure Loss 993 kPaContour Length 3724 Contour Length 3861 Speed Range 16-50
280XTHead Diameter 120.65 Side 1: 203.2 Max Pressure 1,407 kPa 1,759 kPaMajor Diameter 124.91 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
2,111 kPa 2,322 kPaHead Length 177.8 Side 2: 203.2 Max Torque 12,907 N-mWeight 293 Weight 375 Stall Pressure 2,251 kPa 2,814 kPa
N-m 16,133 N-m 19,360 N-m 21,296 3,376 kPa 3,714 kPa
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 20,649 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 25,814 N-m 30,969 N-m 34,070
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 110.62 -0.26 110.44 -0.08T
21
4 OS 111.15 -0.79 111.15 -0.793
65
87
Reline Lengths (mm) Breen: Max 4267 Min 3912 Willis: Max
2/24/2015
Min Alternate Stator OD: 196.9 mm
0
5,000
10,000
15,000
20,000
25,000
0 500 1,000 1,500 2,000 2,500 3,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
3407 LPM
2271 LPM
1136 LPM
0
10
20
30
40
50
60
0 500 1,000 1,500 2,000 2,500 3,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
3407 LPM
2271 LPM
1136 LPM
0
20
40
60
80
100
120
0 500 1,000 1,500 2,000 2,500 3,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
800-7820 8” 7:8 Lobes 2 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 196
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 800-78308" 7:8 Lobes 3 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 117.08 Tube OD 203.2 Rev per Unit Volume 0.04 Rev/LOverall Length 3901 Overall Length 4064 Flow Range 1136-3407
RPMEccentricity 7.33 Tube ID 158.75 No Load Pressure Loss 1132 kPaContour Length 3724 Contour Length 3658 Speed Range 48-146
280XTHead Diameter 120.65 Side 1: 203.2 Max Pressure 2,255 kPa 2,819 kPaMajor Diameter 131.73 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
3,383 kPa 3,721 kPaHead Length 177.8 Side 2: 203.2 Max Torque 7,167 N-mWeight 336 Weight 428 Stall Pressure 3,608 kPa 4,510 kPa
N-m 8,959 N-m 10,751 N-m 11,827 5,412 kPa 5,953 kPa
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 11,468 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 14,335 N-m 17,203 N-m 18,922
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitS
WillisWillis Fit Breen Fit Willis Fit115.95 1.12 115.62 1.45
0 S OS 116.64 0.44116.18 0.90 115.87 1.20
116.56 0.510.34 116.51 0.57 116.97 0.11T
116.74117.07 0.01
21
4 OS 118.01 -0.93 117.78 -0.703
65
87
Reline Lengths (mm) Breen: Max 4267 Min 3912 Willis: Max
2/24/2015
4267 Min 3759 Alternate Stator OD: 196.9/209.6 mm
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
0 1,000 2,000 3,000 4,000 5,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
3407 LPM
2271 LPM
1136 LPM
0
20
40
60
80
100
120
140
160
0 1,000 2,000 3,000 4,000 5,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
3407 LPM
2271 LPM
1136 LPM
0
20
40
60
80
100
120
140
160
180
200
0 1,000 2,000 3,000 4,000 5,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
800-7830 8” 7:8 Lobes 3 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 197
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 800-78408" 7:8 Lobes 4 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 117.08 Tube OD 203.2 Rev per Unit Volume 0.04 Rev/LOverall Length 4991 Overall Length 5161 Flow Range 1136-3407
RPMEccentricity 7.33 Tube ID 158.75 No Load Pressure Loss 1130 kPaContour Length 4813 Contour Length 4755 Speed Range 48-146
280XTHead Diameter 120.65 Side 1: 203.2 Max Pressure 3,275 kPa 4,094 kPaMajor Diameter 131.73 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
4,913 kPa 5,404 kPaHead Length 177.8 Side 2: 203.2 Max Torque 10,430 N-mWeight 430 Weight 544 Stall Pressure 5,240 kPa 6,550 kPa
N-m 13,037 N-m 15,645 N-m 17,210 7,860 kPa 8,646 kPa
Thread Form 3 1/2" API IF / Reg Material Alloy Steel Stall Torque 16,688 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 20,860 N-m 25,032 N-m 27,536
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitS
WillisWillis Fit Breen Fit Willis Fit116.03 1.05 115.67 1.40
0 S 116.48 0.59116.18 0.90 115.87 1.20
116.36 0.72T
2 0.5-OS OS 117.50 -0.43 116.71 0.360.31 117.09 -0.02 116.89 0.181
116.76117.07 0.01
4 OS 117.81 -0.73 117.68 -0.603
65
87
Reline Lengths (mm) Breen: Max 5232 Min 4928 Willis: Max
2/24/2015
5309 Min 4856 Alternate Stator OD: 196.9 mm
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
20,000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
3407 LPM
2271 LPM
1136 LPM
0
20
40
60
80
100
120
140
160
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
3407 LPM
2271 LPM
1136 LPM
0
50
100
150
200
250
300
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
800-7840 8” 7:8 Lobes 4 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 198
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 800-910278" 9:10 Lobes 2.7 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 121.55 Tube OD 203.2 Rev per Unit Volume 0.01 Rev/LOverall Length 6655 Overall Length 6858 Flow Range 1136-3407
RPMEccentricity 6.09 Tube ID 158.75 No Load Pressure Loss 2314 kPaContour Length 6464 Contour Length 6452 Speed Range 13-40
280XTHead Diameter 123.19 Side 1: 203.2 Max Pressure 993 kPa 1,241 kPaMajor Diameter 133.73 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
1,490 kPa 1,638 kPaHead Length 190.5 Side 2: 203.2 Max Torque 11,012 N-mWeight 612 Weight 714 Stall Pressure 1,588 kPa 1,986 kPa
N-m 13,766 N-m 16,519 N-m 18,171 2,383 kPa 2,621 kPa
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 17,611 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 22,025 N-m 26,428 N-m 29,068
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitUS 120.80 0.75
WillisWillis Fit Breen Fit Willis Fit0.75
0 S 121.31 0.24120.80121.29 0.27
T
21
43
65
87
Reline Lengths (mm) Breen: Max 6858 Min 6604 Willis: Max
2/24/2015
- Min - Alternate Stator OD: - mm
0
5,000
10,000
15,000
20,000
25,000
0 500 1,000 1,500 2,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.200
0.400
0.600
0.800
1.000
1.200
1.400
1.600
1.800
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
3407 LPM
2271 LPM
1136 LPM
0
5
10
15
20
25
30
35
40
45
0 500 1,000 1,500 2,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
3407 LPM
2271 LPM
1136 LPM
0
10
20
30
40
50
60
70
80
0 500 1,000 1,500 2,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
800-91027 8” 9:10 Lobes 2.7 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 199
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 962-23759.62" 2:3 Lobes 7.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 134.51 Tube OD 244.3 Rev per Unit Volume 0.13 Rev/LOverall Length 5131 Overall Length 5283 Flow Range 2271-4542
RPMEccentricity 12.35 Tube ID 200.15 No Load Pressure Loss 1416 kPaContour Length 4902 Contour Length 4826 Speed Range 287-574
280XTHead Diameter 139.70 Side 1: 228.6 Max Pressure 5,330 kPa 6,663 kPaMajor Diameter 159.21 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
7,995 kPa 8,795 kPaHead Length 228.6 Side 2: 228.6 Max Torque 6,438 N-mWeight 599 Weight 686 Stall Pressure 8,528 kPa 10,660 kPa
N-m 8,048 N-m 9,657 N-m 10,623 12,792 kPa 14,071 kPa
Thread Form 4" API FH Material Alloy Steel Stall Torque 10,301 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 12,877 N-m 15,452 N-m 16,997
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0T
2 S 134.49 0.01 134.77 -0.271
43
65
87
Reline Lengths (mm) Breen: Max 5283 Min 4928 Willis: Max
2/24/2015
- Min - Alternate Stator OD: - mm
0
2,000
4,000
6,000
8,000
10,000
12,000
0 2,000 4,000 6,000 8,000 10,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
3.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
4542 LPM
3407 LPM
2271 LPM
0
100
200
300
400
500
600
700
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
4542 LPM
3407 LPM
2271 LPM
0
100
200
300
400
500
600
0 2,000 4,000 6,000 8,000 10,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
962-2375 9.62” 2:3 Lobes 7.5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 200
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 962-34459.62" 3:4 Lobes 4.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 121.40 Tube OD 244.3 Rev per Unit Volume 0.06 Rev/LOverall Length 4242 Overall Length 4521 Flow Range 2271-4542
RPMEccentricity 15.23 Tube ID 200.03 No Load Pressure Loss 997 kPaContour Length 4064 Contour Length 4013 Speed Range 135-270
280XTHead Diameter 139.70 Side 1: 254.0 Max Pressure 3,296 kPa 4,120 kPaMajor Diameter 151.85 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
4,944 kPa 5,438 kPaHead Length 177.8 Side 2: 254.0 Max Torque 8,281 N-mWeight 396 Weight 613 Stall Pressure 5,273 kPa 6,592 kPa
N-m 10,351 N-m 12,421 N-m 13,664 7,910 kPa 8,701 kPa
Thread Form 4" API FH Material Alloy Steel Stall Torque 13,248 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 16,562 N-m 19,874 N-m 21,861
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitS
WillisWillis Fit Breen Fit Willis Fit121.16 0.24 120.12 1.28
0 OS121.13 0.26 120.40 1.00
120.93 0.470.19 121.82 -0.42T
121.21121.92 -0.53
21
4 OS 2-OS 122.48 -1.08 121.56 -0.17-0.45 122.48 -1.08 122.48 -1.083
121.84122.15 -0.75
65
87
Reline Lengths (mm) Breen: Max 4521 Min 4216 Willis: Max
2/24/2015
4521 Min 4216 Alternate Stator OD: 241.3 mm
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
3.000
3.500
4.000
4.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
4542 LPM
3407 LPM
2271 LPM
0
50
100
150
200
250
300
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
4542 LPM
3407 LPM
2271 LPM
0
50
100
150
200
250
300
350
400
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
962-3445 9.62” 3:4 Lobes 4.5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 201
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 962-34609.62" 3:4 Lobes 6 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 121.40 Tube OD 244.3 Rev per Unit Volume 0.06 Rev/LOverall Length 5563 Overall Length 5791 Flow Range 2271-4542
RPMEccentricity 15.23 Tube ID 199.39 No Load Pressure Loss 1003 kPaContour Length 5385 Contour Length 5334 Speed Range 135-271
280XTHead Diameter 139.70 Side 1: 228.6 Max Pressure 4,702 kPa 5,878 kPaMajor Diameter 151.85 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
7,053 kPa 7,758 kPaHead Length 177.8 Side 2: 228.6 Max Torque 11,763 N-mWeight 518 Weight 796 Stall Pressure 7,523 kPa 9,404 kPa
N-m 14,704 N-m 17,645 N-m 19,409 11,284 kPa 12,413 kPa
Thread Form 4" API FH Material Alloy Steel Stall Torque 18,821 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 23,527 N-m 28,230 N-m 31,054
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S S 121.06 0.34 119.91 1.481.08 120.78 0.62 120.83 0.57T
120.32120.85 0.54
21
4 OS OS 122.45 -1.06 121.56 -0.17-0.40 122.12 -0.73 122.45 -1.063
121.79122.30 -0.91
65
87
Reline Lengths (mm) Breen: Max 5791 Min 5436 Willis: Max
2/24/2015
5791 Min 5486 Alternate Stator OD: - mm
0
5,000
10,000
15,000
20,000
25,000
0 2,000 4,000 6,000 8,000 10,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
3.000
3.500
4.000
4.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
4542 LPM
3407 LPM
2271 LPM
0
50
100
150
200
250
300
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
4542 LPM
3407 LPM
2271 LPM
0
100
200
300
400
500
600
0 2,000 4,000 6,000 8,000 10,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
962-3460 9.62” 3:4 Lobes 6 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 202
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 962-45569.62" 4:5 Lobes 5.6 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 134.02 Tube OD 244.3 Rev per Unit Volume 0.07 Rev/LOverall Length 3645 Overall Length 3912 Flow Range 1893-4164
RPMEccentricity 13.52 Tube ID 200.03 No Load Pressure Loss 974 kPaContour Length 3411 Contour Length 3404 Speed Range 123-272
280XTHead Diameter 139.70 Side 1: 254.0 Max Pressure 4,702 kPa 5,878 kPaMajor Diameter 161.06 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
7,053 kPa 7,758 kPaHead Length 233.4 Side 2: 254.0 Max Torque 10,510 N-mWeight 416 Weight 518 Stall Pressure 7,523 kPa 9,404 kPa
N-m 13,138 N-m 15,766 N-m 17,343 11,284 kPa 12,413 kPa
Thread Form 3 1/2" API FH Material Alloy Steel Stall Torque 16,817 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 21,021 N-m 25,224 N-m 27,748
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 133.86 0.17-0.04 134.80 -0.77T
134.06134.75 -0.72
21
43
65
87
Reline Lengths (mm) Breen: Max - Min - Willis: Max
2/24/2015
3912 Min 3607 Alternate Stator OD: - mm
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
20,000
0 2,000 4,000 6,000 8,000 10,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
3.000
3.500
4.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
4164 LPM
3028 LPM
1893 LPM
0
50
100
150
200
250
300
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
4164 LPM
3028 LPM
1893 LPM
0
50
100
150
200
250
300
350
400
450
500
0 2,000 4,000 6,000 8,000 10,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
962-4556 9.62” 4:5 Lobes 5.6 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 203
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 962-56309.62" 5:6 Lobes 3 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 135.65 Tube OD 244.3 Rev per Unit Volume 0.03 Rev/LOverall Length 4242 Overall Length 4521 Flow Range 2271-4542
RPMEccentricity 11.37 Tube ID 200.03 No Load Pressure Loss 1096 kPaContour Length 4028 Contour Length 4013 Speed Range 66-133
280XTHead Diameter 139.70 Side 1: 254.0 Max Pressure 2,034 kPa 2,543 kPaMajor Diameter 158.40 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
3,051 kPa 3,356 kPaHead Length 213.4 Side 2: 254.0 Max Torque 9,937 N-mWeight 493 Weight 602 Stall Pressure 3,254 kPa 4,068 kPa
N-m 12,421 N-m 14,905 N-m 16,396 4,881 kPa 5,369 kPa
Thread Form 4" API FH Material Alloy Steel Stall Torque 15,897 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 19,874 N-m 23,846 N-m 26,230
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitS
WillisWillis Fit Breen Fit Willis Fit134.75 0.90 134.04 1.61
0 S OS 135.41 0.24134.85 0.80 134.34 1.31
135.23 0.420.24 135.23 0.42 136.50 -0.85T
135.41136.09 -0.44
21
4 OS 136.09 -0.44 136.09 -0.443
65
87
Reline Lengths (mm) Breen: Max 4521 Min 4166 Willis: Max
2/24/2015
4521 Min 4216 Alternate Stator OD: 241.3/31.8 mm
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
20,000
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
3.000
3.500
4.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
4542 LPM
3407 LPM
2271 LPM
0
20
40
60
80
100
120
140
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
4542 LPM
3407 LPM
2271 LPM
0
50
100
150
200
250
0 1,000 2,000 3,000 4,000 5,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
962-5630 9.62” 5:6 Lobes 3 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 204
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 962-56409.62" 5:6 Lobes 4 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 134.01 Tube OD 244.3 Rev per Unit Volume 0.03 Rev/LOverall Length 5575 Overall Length 5791 Flow Range 2271-4542
RPMEccentricity 11.43 Tube ID 200.03 No Load Pressure Loss 1107 kPaContour Length 5398 Contour Length 5334 Speed Range 61-123
280XTHead Diameter 139.70 Side 1: 228.6 Max Pressure 3,054 kPa 3,818 kPaMajor Diameter 156.87 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
4,581 kPa 5,039 kPaHead Length 177.8 Side 2: 228.6 Max Torque 16,061 N-mWeight 651 Weight 774 Stall Pressure 4,886 kPa 6,108 kPa
N-m 20,076 N-m 24,091 N-m 26,500 7,329 kPa 8,062 kPa
Thread Form 4" API FH Material Alloy Steel Stall Torque 25,695 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 32,122 N-m 38,543 N-m 42,398
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 133.68 0.33 133.48 0.53T
2 S 133.88 0.13-0.13 134.77 -0.761
134.14134.72 -0.71
4 OS 135.33 -1.32-1.73 136.50 -2.493
135.74136.14 -2.13
65
137.01 -3.00 136.07 -2.068
137.01 -3.00 136.27 -2.267 2-OS
Reline Lengths (mm) Breen: Max 5794 Min 5438 Willis: Max
2/24/2015
5791 Min 5486 Alternate Stator OD: 284.5/31.8 mm
0
5,000
10,000
15,000
20,000
25,000
30,000
0 1,000 2,000 3,000 4,000 5,000 6,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
3.000
3.500
4.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
4542 LPM
3407 LPM
2271 LPM
0
20
40
60
80
100
120
140
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
4542 LPM
3407 LPM
2271 LPM
0
50
100
150
200
250
300
350
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
962-5640 9.62” 5:6 Lobes 4 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 205
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 962-67309.62" 6:7 Lobes 3 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 143.74 Tube OD 244.3 Rev per Unit Volume 0.04 Rev/LOverall Length 3759 Overall Length 3950 Flow Range 2271-4542
RPMEccentricity 10.25 Tube ID 200.15 No Load Pressure Loss 1471 kPaContour Length 3581 Contour Length 3543 Speed Range 98-197
280XTHead Diameter 139.70 Side 1: 203.2 Max Pressure 2,220 kPa 2,775 kPaMajor Diameter 164.24 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
3,330 kPa 3,663 kPaHead Length 177.8 Side 2: 203.2 Max Torque 7,147 N-mWeight 469 Weight 563 Stall Pressure 3,552 kPa 4,440 kPa
N-m 8,934 N-m 10,721 N-m 11,793 5,328 kPa 5,860 kPa
Thread Form 4" API FH Material Alloy Steel Stall Torque 11,436 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 14,295 N-m 17,154 N-m 18,867
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 143.64 0.10 143.64 0.10T
21
43
65
87
Reline Lengths (mm) Breen: Max 3950 Min 3752 Willis: Max
2/24/2015
- Min - Alternate Stator OD: - mm
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
0 1,000 2,000 3,000 4,000 5,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
3.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
4542 LPM
3407 LPM
2271 LPM
0
50
100
150
200
250
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
4542 LPM
3407 LPM
2271 LPM
0
50
100
150
200
250
0 1,000 2,000 3,000 4,000 5,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
962-6730 9.62” 6:7 Lobes 3 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 206
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 962-67509.62" 6:7 Lobes 5 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 140.92 Tube OD 244.3 Rev per Unit Volume 0.03 Rev/LOverall Length 5131 Overall Length 5537 Flow Range 2271-4542
RPMEccentricity 10.87 Tube ID 199.44 No Load Pressure Loss 1102 kPaContour Length 4953 Contour Length 5131 Speed Range 76-153
280XTHead Diameter 146.05 Side 1: 203.2 Max Pressure 4,654 kPa 5,818 kPaMajor Diameter 162.65 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
6,981 kPa 7,679 kPaHead Length 177.8 Side 2: 203.2 Max Torque 19,323 N-mWeight 621 Weight 745 Stall Pressure 7,446 kPa 9,308 kPa
N-m 24,153 N-m 28,984 N-m 31,883 11,169 kPa 12,286 kPa
Thread Form 4" API FH Material Alloy Steel Stall Torque 30,915 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 38,646 N-m 46,372 N-m 51,010
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S S 141.02 -0.11 140.06 0.860.61 140.82 0.10 140.82 0.10T
140.31140.79 0.12
21
4 OS 141.73 -0.82 141.61 -0.693
65
87
Reline Lengths (mm) Breen: Max 5283 Min 4928 Willis: Max
2/24/2015
5537 Min 5232 Alternate Stator OD: 284.5/31.8 mm
0
5,000
10,000
15,000
20,000
25,000
30,000
35,000
40,000
0 2,000 4,000 6,000 8,000 10,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
3.000
3.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
4542 LPM
3407 LPM
2271 LPM
0
20
40
60
80
100
120
140
160
180
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
4542 LPM
3407 LPM
2271 LPM
0
100
200
300
400
500
600
0 2,000 4,000 6,000 8,000 10,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
962-6750 9.62” 6:7 Lobes 5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 207
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 962-67609.62" 6:7 Lobes 6 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 140.92 Tube OD 244.3 Rev per Unit Volume 0.04 Rev/LOverall Length 6096 Overall Length 6350 Flow Range 2271-4542
RPMEccentricity 10.87 Tube ID 200.15 No Load Pressure Loss 1720 kPaContour Length 5918 Contour Length 5893 Speed Range 97-195
280XTHead Diameter 139.70 Side 1: 228.6 Max Pressure 4,888 kPa 6,110 kPaMajor Diameter 162.65 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
7,332 kPa 8,065 kPaHead Length 177.8 Side 2: 228.6 Max Torque 15,890 N-mWeight 731 Weight 921 Stall Pressure 7,820 kPa 9,776 kPa
N-m 19,863 N-m 23,836 N-m 26,219 11,731 kPa 12,904 kPa
Thread Form 4" API FH Material Alloy Steel Stall Torque 25,422 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 31,781 N-m 38,136 N-m 41,950
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 140.92 0.00 140.69 0.22T
21
4 OS 142.04 -1.12 142.04 -1.123
65
87
Reline Lengths (mm) Breen: Max 6350 Min 5994 Willis: Max
2/24/2015
- Min - Alternate Stator OD: 284.5/31.8 mm
0
5,000
10,000
15,000
20,000
25,000
30,000
0 2,000 4,000 6,000 8,000 10,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
3.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
4542 LPM
3407 LPM
2271 LPM
0
50
100
150
200
250
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000 10,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
4542 LPM
3407 LPM
2271 LPM
0
50
100
150
200
250
300
350
400
450
500
0 2,000 4,000 6,000 8,000 10,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
962-6760 9.62” 6:7 Lobes 6 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 208
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 962-7848 (B)9.62" 7:8 Lobes 4.8 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 144.56 Tube OD 244.3 Rev per Unit Volume 0.03 Rev/LOverall Length 5931 Overall Length 6261 Flow Range 2271-4542
RPMEccentricity 8.96 Tube ID 199.44 No Load Pressure Loss 1339 kPaContour Length 5729 Contour Length 5753 Speed Range 69-139
280XTHead Diameter 152.40 Side 1: 254.0 Max Pressure 4,144 kPa 5,180 kPaMajor Diameter 162.48 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
6,216 kPa 6,838 kPaHead Length 201.4 Side 2: 254.0 Max Torque 18,509 N-mWeight 754 Weight 841 Stall Pressure 6,630 kPa 8,288 kPa
N-m 23,137 N-m 27,764 N-m 30,540 9,945 kPa 10,940 kPa
Thread Form 4" API FH Material Alloy Steel Stall Torque 29,613 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 37,019 N-m 44,420 N-m 48,864
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 142.49 2.071.84 143.13 1.44T
142.72143.15 1.41
21
4 OS 143.23 1.331.28 143.66 0.903
143.28143.71 0.85
65
87
Reline Lengths (mm) Breen: Max - Min - Willis: Max
2/24/2015
6261 Min 5956 Alternate Stator OD: 284.5/31.8 mm
0
5,000
10,000
15,000
20,000
25,000
30,000
35,000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
3.000
3.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
4542 LPM
3407 LPM
2271 LPM
0
20
40
60
80
100
120
140
160
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
4542 LPM
3407 LPM
2271 LPM
0
50
100
150
200
250
300
350
400
450
0 2,000 4,000 6,000 8,000 10,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
962-7848 (B) 9.62” 7:8 Lobes 4.8 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 209
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 962-78579.62" 7:8 Lobes 5.7 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 143.89 Tube OD 244.3 Rev per Unit Volume 0.03 Rev/LOverall Length 5864 Overall Length 6096 Flow Range 2271-4542
RPMEccentricity 8.99 Tube ID 199.44 No Load Pressure Loss 1219 kPaContour Length 5639 Contour Length 5588 Speed Range 74-149
280XTHead Diameter 139.70 Side 1: 254.0 Max Pressure 5,075 kPa 6,344 kPaMajor Diameter 161.87 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
7,613 kPa 8,374 kPaHead Length 225.6 Side 2: 254.0 Max Torque 21,087 N-mWeight 751 Weight 816 Stall Pressure 8,120 kPa 10,150 kPa
N-m 26,359 N-m 31,631 N-m 34,794 12,180 kPa 13,398 kPa
Thread Form 4" API FH Material Alloy Steel Stall Torque 33,739 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 42,174 N-m 50,609 N-m 55,670
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 143.08 0.810.63 143.66 0.23T
143.26143.66 0.23
21
43
65
87
Reline Lengths (mm) Breen: Max - Min - Willis: Max
2/24/2015
6096 Min 5791 Alternate Stator OD: 284.5/31.8 mm
0
5,000
10,000
15,000
20,000
25,000
30,000
35,000
40,000
0 2,000 4,000 6,000 8,000 10,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
0.500
1.000
1.500
2.000
2.500
3.000
3.500
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
4542 LPM
3407 LPM
2271 LPM
0
20
40
60
80
100
120
140
160
0 2,000 4,000 6,000 8,000 10,000 12,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
4542 LPM
3407 LPM
2271 LPM
0
100
200
300
400
500
600
0 2,000 4,000 6,000 8,000 10,000 12,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
962-7857 9.62” 7:8 Lobes 5.7 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 210
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 1125-343611.25" 3:4 Lobes 3.6 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 141.57 Tube OD 285.8 Rev per Unit Volume 0.03 Rev/LOverall Length 4890 Overall Length 5105 Flow Range 3785-5678
RPMEccentricity 17.71 Tube ID 234.95 No Load Pressure Loss 1195 kPaContour Length 4638 Contour Length 4572 Speed Range 117-175
280XTHead Diameter 165.10 Side 1: 266.7 Max Pressure 2,227 kPa 2,784 kPaMajor Diameter 176.99 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
3,341 kPa 3,675 kPaHead Length 251.5 Side 2: 266.7 Max Torque 10,768 N-mWeight 623 Weight 933 Stall Pressure 3,563 kPa 4,454 kPa
N-m 13,461 N-m 16,153 N-m 17,768 5,344 kPa 5,879 kPa
Thread Form 4 1/2" API Reg Material Alloy Steel Stall Torque 17,229 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 21,537 N-m 25,841 N-m 28,428
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 138.89 2.682.15 140.34 1.23T
139.42140.13 1.44
21
43
65
87
Reline Lengths (mm) Breen: Max - Min - Willis: Max
2/24/2015
5105 Min 4801 Alternate Stator OD: 292.1 mm
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
20,000
0 1,000 2,000 3,000 4,000 5,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
1.000
2.000
3.000
4.000
5.000
6.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
5678 LPM
4732 LPM
3785 LPM
0
20
40
60
80
100
120
140
160
180
200
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
5678 LPM
4732 LPM
3785 LPM
0
50
100
150
200
250
300
350
0 1,000 2,000 3,000 4,000 5,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
1125-3436 11.25” 3:4 Lobes 3.6 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 211
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 1125-675511.25" 6:7 Lobes 5.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 170.40 Tube OD 285.8 Rev per Unit Volume 0.02 Rev/LOverall Length 6096 Overall Length 6350 Flow Range 3407-6814
RPMEccentricity 12.37 Tube ID 234.95 No Load Pressure Loss 4271 kPaContour Length 5842 Contour Length 5817 Speed Range 56-112
280XTHead Diameter 165.10 Side 1: 266.7 Max Pressure 1,896 kPa 2,370 kPaMajor Diameter 195.14 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
2,844 kPa 3,128 kPaHead Length 254.0 Side 2: 266.7 Max Torque 16,082 N-mWeight 1082 Weight 1119 Stall Pressure 3,033 kPa 3,792 kPa
N-m 20,103 N-m 24,124 N-m 26,536 4,550 kPa 5,005 kPa
Thread Form 62C0013 Material Alloy Steel Stall Torque 25,727 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 32,165 N-m 38,595 N-m 42,454
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 169.90 0.50 169.80 0.60T
21
43
65
87
Reline Lengths (mm) Breen: Max 6350 Min 6045 Willis: Max
2/24/2015
- Min - Alternate Stator OD: - mm
0
5,000
10,000
15,000
20,000
25,000
30,000
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
2.000
4.000
6.000
8.000
10.000
12.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
6814 LPM
5110 LPM
3407 LPM
0
20
40
60
80
100
120
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
6814 LPM
5110 LPM
3407 LPM
0
50
100
150
200
250
300
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
1125-6755 11.25” 6:7 Lobes 5.5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 212
mm mmmm mmmm mmmm mmmmmm mmmm mmkg kg
Power Section Specification (Metric Units) 1125-675611.25" 6:7 Lobes 5.6 Stages
Rotor Specifications Stator Specifications Performance Specifications
LPMAvg. Diameter 167.61 Tube OD 285.8 Rev per Unit Volume 0.02 Rev/LOverall Length 6147 Overall Length 6350 Flow Range 3785-6814
RPMEccentricity 12.87 Tube ID 234.95 No Load Pressure Loss 5753 kPaContour Length 5905 Contour Length 5817 Speed Range 60-109
280XTHead Diameter 165.10 Side 1: 266.7 Max Pressure 434 kPa 543 kPaMajor Diameter 193.34 Rubber Cut-back RR-UF100D-UF180 UF114 POB-PRR
651 kPa 716 kPaHead Length 242.0 Side 2: 266.7 Max Torque 3,773 N-mWeight 1017 Weight 1142 Stall Pressure 694 kPa 868 kPa
N-m 4,717 N-m 5,660 N-m 6,226 1,041 kPa 1,145 kPa
Thread Form 62C0013 Material Alloy Steel Stall Torque 6,034 N-m
Stator Minors and Fit (mm)
Nomenclature RR UF100D-UF180 UF114 POB-PRR 280XT
N-m 7,547 N-m 9,051 N-m 9,955
Size Breen Willis Breen Fit Willis FitFit Breen Fit Willis FitWillisWillis Fit Breen Fit Willis Fit
0 S 167.36 0.25 167.31 0.30T
21
43
65
87
Reline Lengths (mm) Breen: Max 6350 Min 6045 Willis: Max
2/24/2015
- Min - Alternate Stator OD: - mm
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
0 200 400 600 800 1,000
To
rqu
e (N
m)
Torque
Differential Pressure (kPa)
0.000
2.000
4.000
6.000
8.000
10.000
12.000
0 20 40 60 80 100 120 140
Fit
In
cre
as
e (m
m)
Fit Increase
Change in Temperature (degC)
6814 LPM
5300 LPM
3785 LPM
0
20
40
60
80
100
120
0 100 200 300 400 500 600 700 800 900
Sp
ee
d (r
pm)
Speed
Differential Pressure (kPa)
6814 LPM
5300 LPM
3785 LPM
0
10
20
30
40
50
60
70
0 200 400 600 800 1,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
at 21o C
1125-6756 11.25” 6:7 Lobes 5.6 Stages
ERT Power Sections
www.nov.com/PowerSections
Drilling and Intervention
NOV Power Sections CatalogERT OPERATIONAL GUIDELINES
REV. 00
PAGE NO: 214
ERT OPERATIONAL GUIDELINES
Introduction ERT power sections dramatically improve motor ROP by providing up to twice the power to the drill bit than conventional power sections of the same length. High power outputs are achieved by applying an even thickness of rubber to an internally machined, one-piece stator contour. However, ERT power sections are not indestructible and just like conventional power sections, are more likely to suffer more damage the harder they are run.
This section provides information that will allow the user to make informed decisions as to how to adjust ERT loading conditions to ensure ROP and service life objectives are achieved. Specific recommendations for fit, differential pressure and flow rate are provided, as well as the means to adjust loading conditions for different operational temperatures.
ERT Compression (Fit) Recommendations Although the steel support of the ERT stator lobe serves to strengthen the lobe during operation, the elastomers used in ERT stators are still subject to weakening and thermal expansion as operational temperatures increase. Additionally, the elastomer may also change shape or weaken due to exposure to oil-based drilling fluids. To ensure optimal field performance, it is therefore necessary to “size” ERT power sections and to reduce power section loading as operational temperatures increase.
Sizing the power section entails reducing the power section’s shop fit to compensate for the elastomer’s expected thermal growth during operation, thereby reducing the stress created due to elastomer compression.
A. Shop Fit CalculationThe fit of an ERT power section represents the amount that the stator’s elastomer is compressed across its diameter by its mating rotor. An ERT’s fit is determined in the same manner as with a conventional power section by subtracting the stator’s minor diameter from the average rotor diameter:
Even Lobe Rotors : Rotor Major Diameter + Rotor Minor Diameter Fit = [ ]- Stator Minor Diameter
2
Odd Lobe Rotors : Fit = (Rotor “Valley” to “Crest” Diameter) - Stator Minor Diameter
B. Adjustment of Shop Fit Measurement for Different Shop TemperaturesERT fit recommendation graphs assume that the shop fit has been normalized to reflect the fit at 75°F (24°C). If the stator’s tempera-ture when measured is dramatically above or below this temperature, the measured fit should be corrected according to specific fit correction graphs for each ERT model and elastomer.
To normalize the measured “shop fit”, simply add the numbers in the graph to the measured shop fit based on the temperature of the stator’s elastomer when its minor diameter was measured. For example, referencing this table, 0.004” should be added to the shop fit measurement if the stator was 40oF when measured. This sum will be used to determine the recommended operational temperature for the fit.
Drilling and Intervention
NOV Power Sections CatalogERT OPERATIONAL GUIDELINES
REV. 00
PAGE NO: 215
Depending upon the storage conditions of the stator, the shop temperature may not be the same as the stator’s temperature. This can occur when storing the stator outside at extreme temperatures and then measuring the stator inside without allowing the stator’s temperature to normalize. In situations like this, a direct measurement of stator’s elastomer temperature should be taken or the stator temperature should be allowed to reach equilibrium with the shop’s temperature before the stator’s minor diameter is measured.
C. ERT Fit Chart InterpretationERT Fit Charts provide the recommended operational temperature range for specific shop fits as well as the recommended shop fit ranges for specific operational temperature ranges. This information is provided for each ERT model lined with both POB and UF114 elastomers. Color coded areas are used to highlight acceptable fit and temperature range combinations. The two green zones represent the recommended temperature ranges for each fit and produce compressions of 0% to 2%. The dark green area produces compressions of 0.5% to 1.5% and provides the optimal combination of power, torque and operational life.
The yellow zones represent temperature ranges in which ERTs can be run, but at the risk of shorter run times and decreased power output at lower compression levels. These ranges, from -0.5%–0.0% and 2.0–2.5%, are considered acceptable, but performance and/or life may be inferior to that obtained when running in the green zones.
ExampleAn ERT user intends to run their ERT at 175°F (79°C). What range of fits would be recommended for this application?
Dark Green Zone - Moving upward from 175°F to the dark green zone and then to the right axis indicates that the “green zone” shop fit for this application will be between -0.015” and -0.003” (-0.38 and -0.08 mm).
Light Green Zones - Run life when operated at tighter fits of between -0.003” and 0.001” (0.08 and 0.02mm) may be less than that obtained from reduced fits, but power output will be higher.
Power output will be reduced when operated at looser fits of between -0.015” and -0.018” (-0.38 and -0.46 mm). This may decrease drilling rates and contribute to greater fluctuations in torque output and therefore bit speed. The power section may see higher dynamic loading.
Drilling and Intervention
NOV Power Sections CatalogERT OPERATIONAL GUIDELINES
REV. 00
PAGE NO: 216
Consideration of Volume Swell due to Fluid Exposure Due to the small elastomer volume of ERT stators the minor diameter of ERT stators will seldom grow by more than 0.005” (0.13 mm) when exposed to oil-based muds (OBMs). Should the user expect the elastomer to swell during use, subtract the expected swell from the measured shop fit to correct for the expansion. The recommended temperature ranges for the ERT will then be a function of this corrected fit.
ExampleContinuing the above example, if the user expects the drilling fluid to “swell” the elastomer by about 0.005” (0.13 mm), what shop fit is recommended for an operation at 175°F (79°C)?
Recommended fit with no elastomer swell = -0.015” and -0.003” (-0.38 and -0.08 mm)
Expected minor diameter swell = 0.005” (0.13 mm)
Recommended fit with elastomer swell = -0.020” to -0.008” (-0.51 to -0.20 mm)
The minor diameters of ERT stators can also increase during use, due to wear, compression set or sometimes fluid interaction. If minor diameter growth is expected in a particular application the user should add the expected growth to the shop fit to correct for this change.
Relationship between ERT Operational Loading and Stator Durability The reliability and durability of an ERT power section will be a function of the stress applied to the elastomer during operation, the rate at which the stress is applied and the strength of the stator’s elastomer. Elastomer stress will be a function of static stress com-ponents such as power section fit as well as dynamic components such as centrifugal loading, which is a function of flow rate, differ-ential pressure and the dynamic nature of the torque loading generated by the drill bit. The strength of an elastomer will decrease as operational temperatures increase and due to exposure to oil and synthetic based muds.
Given the multitude of factors that affect power section loading and elastomer strength, it is not possible to provide a universal differential pressure recommendation that will be suitable for all applications. It is possible, however, to provide a baseline differential pressure loading level that the ERT user can adjust based on their experience and the specific operational conditions to which the ERT will be exposed.
Drilling and Intervention
NOV Power Sections CatalogERT OPERATIONAL GUIDELINES
REV. 00
PAGE NO: 217
The differential pressure loading levels in the table below represent the maximum that would be recommended at 200°F (93°C). Multiplying the number of stages by the differential pressure/stage will provide the total baseline differential pressure that is recom-mended. The “Flow/Speed Line” categories refer to the corresponding curves on each ERT’s speed graph.
Max Optimal diff/stageFlow /Speed Line 114 POB & 280XT
High 125 150Medium 150 180
Low 100 120
Note that the loading levels decrease at high flow rates due to the higher centrifugal loading and cycle rates produced. These load-ing levels should also be reduced at higher temperatures, or when running in fluids that tend to weaken the elastomer. Conversely, higher loading levels may be possible at lower temperatures, lower flow rates or benign drilling fluids.
Recommendations regarding how to adjust these loading levels are presented in Adjusting ERT Differential Pressure for Operational Temperature.
Adjusting ERT Differential Pressure for Operational Temperature To maximize ERT run life it is recommended that differential pressures be decreased as operational temperatures increase to offset the natural reduction in elastomer strength that occurs. The graph below is used to adjust loading conditions for any temperature between 150°F and 375°F (65°C and 191°C). This graph applies to all ERT models.
The example below explains how to adjust differential pressures for different operational temperatures.
ExampleAn ERT user has obtained excellent runs with their 675ERTcr7850 at 250°F (121°C) and would like to know how they should adjust the loading conditions used at 250°F to obtain similar reliability at both 200°F (93°C) and 300°F (149°C). The fit has already been adjusted for operation at these temperatures.
Referencing the figure below, the ERT Load Factors are 0.6 at 250°F and about 0.78 at 200°F. The ratio of these factors suggests that the ERT can safely handle a 30% greater load at 200°F than at 250°F. This calculation is depicted below:
Drilling and Intervention
NOV Power Sections CatalogERT OPERATIONAL GUIDELINES
REV. 00
PAGE NO: 218
Based on the above fit, if the user was running the ERT at 100 psi/stage at 250oF, they could potentially raise the loading level to 130 psi/stage at 200oF and obtain the same power section run life.
How to Translate Loading Factors to Pressures and Flows But how does the user translate this potential 30% increase in loading conditions to a specific differential pressure and flow rate? It would be simple to leave the flow rate unchanged and only adjust the differential pressure consumed. However, to ensure optimal power section life, it is best to also adjust flow rate, and therefore power section speed. Speed affects elastomer loading by chang-ing the rate at which stress is applied to the elastomer, and affects the magnitude of the stress applied due to centrifugal loading, which increases as flow rates rise. Large reductions in elastomer stress can be achieved at lower flow rates since centrifugal loading increases exponentially with increased flow.
Typically, only modest changes in flow rate are possible due to the need to ensure adequate hole cleaning and a sufficient supply of hydraulic energy to the power section. This is especially true with ERT power sections due to their typically exceptional ROPs. A 1% increase in speed is recommended for every 10°F decrease in operational temperature, and a 2% decrease in speed for every 10°F increase in temperature. Consequently, most of the change in power section loading will be provided by changes in differential pressure.
The following describes in detail a method to determine recommended differential pressures and flow rates. For this example, the “baseline” loading conditions at 250°F are: 400 psi and 550 gpm. For clarity, only English units are used.
• Determine change in loading factor from 250°F to 200°F
Loading factors = 60% at 250°F, 78% at 200°F Change in Loading factor = 0.78/0.60 = 1.30 (30% higher)
This indicates that the ERT can be loaded approximately 30% higher at 200°F than at 250°F.
• Adjust the flow rate up by 1% (for lower operational temperatures) or down 2% (for higher operational temperatures) for every 10°F of temperature change from the flow rate that formed the baseline operational condition.
Baseline operational temperature = 250°F Target temperature = 200°F Temperature difference = -50°F Flow rate factor = 1.05 (1% change for every 10°F decrease in temperature) Flow at 200°F = 578 gpm (Flow rate factor x 550 gpm = 1.05 x 550)
Drilling and Intervention
NOV Power Sections CatalogERT OPERATIONAL GUIDELINES
REV. 00
PAGE NO: 219
• AdjusttheDifferentialPressure
DifferentialPressureFactor = LoadingFactor/FlowRateFactor DifferentialPressureFactor = 1.30/1.05=1.24 DifferentialPressureat200°F = 495psi(1.24x400psi)
• Repeatingtheexercisefor300°Foperationproducesthefollowingnumbers:
Loadingat250°F = 400psiand550gpm Loadingfactorat300°F = 0.44/0.6=0.73.Flowat300°F=495gpm(550x0.90) DifferentialPressureat300°F = 324psi(400x0.73/0.9) Loadingat300°Fshouldbe324psiand495gpm
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field performance may vary with field operational conditions.
Drilling and Intervention
NOV Power Sections CatalogERT Operational Temperature Range By OD Size
REV. 00
PAGE NO: 220
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
475ERT4536 lined with POB
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
475ERT4536 lined with UF114
-0.006
-0.004
-0.002
0.000
0.002
0.004
0.0060 20 40 60 80 100 120
475E
RT45
36 S
tato
r ID
Corr
ectio
n (IN
)
Shop Temperature (DegF)
POB Shop Fit Correction
-0.006
-0.004
-0.002
0.000
0.002
0.004
0.0060 20 40 60 80 100 120
475E
RT45
36 S
tato
r ID
Corr
ectio
n (IN
)Shop Temperature (DegF)
UF114 Shop Fit Correction
ERT OPERATIONAL TEMPERATURE RANGE BY O.D. SIZE
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field performance may vary with field operational conditions.
Drilling and Intervention
NOV Power Sections CatalogERT Operational Temperature Range By OD Size
REV. 00
PAGE NO: 221
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
475ERT4554 lined with POB
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
475ERT4554 lined with UF114
-0.008
-0.006
-0.004
-0.002
0.000
0.002
0.004
0.006
0.0080 20 40 60 80 100 120
475E
RT45
54 S
tato
r ID
Corr
ectio
n (IN
)
Shop Temperature (DegF)
POB Shop Fit Correction
-0.005
-0.004
-0.003
-0.002
-0.001
0.000
0.001
0.002
0.003
0.004
0.0050 20 40 60 80 100 120
475E
RT45
54 S
tato
r ID
Corr
ectio
n (IN
)Shop Temperature (DegF)
UF114 Shop Fit Correction
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field performance may vary with field operational conditions.
Drilling and Intervention
NOV Power Sections CatalogERT Operational Temperature Range By OD Size
REV. 00
PAGE NO: 222
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
475ERT6725 lined with POB
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
475ERT6725 lined with UF114
-0.005
-0.004
-0.003
-0.002
-0.001
0.000
0.001
0.002
0.003
0.004
0.0050 20 40 60 80 100 120
475E
RT67
25 S
tato
r ID
Corr
ectio
n (IN
)
Shop Temperature (DegF)
POB Shop Fit Correction
-0.005
-0.004
-0.003
-0.002
-0.001
0.000
0.001
0.002
0.003
0.004
0.0050 20 40 60 80 100 120
475E
RT67
25 S
tato
r ID
Corr
ectio
n (IN
)Shop Temperature (DegF)
UF114 Shop Fit Correction
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field performance may vary with field operational conditions.
Drilling and Intervention
NOV Power Sections CatalogERT Operational Temperature Range By OD Size
REV. 00
PAGE NO: 223
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
475ERTcr7838 lined with POB
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
475ERTcr7838 lined with UF114
-0.005
-0.004
-0.003
-0.002
-0.001
0.000
0.001
0.002
0.003
0.004
0.0050 20 40 60 80 100 120
475E
RTcr
7838
Sta
tor I
D Co
rrec
tion
(IN)
Shop Temperature (DegF)
POB Shop Fit Correction
-0.005
-0.004
-0.003
-0.002
-0.001
0.000
0.001
0.002
0.003
0.004
0.0050 20 40 60 80 100 120
475E
RTcr
7838
Sta
tor I
D Co
rrec
tion
(IN)
Shop Temperature (DegF)
UF114 Shop Fit Correction
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field performance may vary with field operational conditions.
Drilling and Intervention
NOV Power Sections CatalogERT Operational Temperature Range By OD Size
REV. 00
PAGE NO: 224
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
500ERTcr6780 lined with POB
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
500ERTcr6780 lined with UF114
-0.008
-0.006
-0.004
-0.002
0.000
0.002
0.004
0.006
0.0080 20 40 60 80 100 120
500E
RTcr
6780
Sta
tor I
D Co
rrec
tion
(IN)
Shop Temperature (DegF)
POB Shop Fit Correction
-0.008
-0.006
-0.004
-0.002
0.000
0.002
0.004
0.006
0.0080 20 40 60 80 100 120
500E
RTcr
6780
Sta
tor I
D Co
rrec
tion
(IN)
Shop Temperature (DegF)
UF114 Shop Fit Correction
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field performance may vary with field operational conditions.
Drilling and Intervention
NOV Power Sections CatalogERT Operational Temperature Range By OD Size
REV. 00
PAGE NO: 225
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
500ERTcr7850 lined with POB
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
500ERTcr7850 lined with UF114
-0.005
-0.004
-0.003
-0.002
-0.001
0.000
0.001
0.002
0.003
0.004
0.0050 20 40 60 80 100 120
500E
RTcr
7850
Sta
tor I
D Co
rrec
tion
(IN)
Shop Temperature (DegF)
POB Shop Fit Correction
-0.005
-0.004
-0.003
-0.002
-0.001
0.000
0.001
0.002
0.003
0.004
0.0050 20 40 60 80 100 120
500E
RTcr
7850
Sta
tor I
D Co
rrec
tion
(IN)
Shop Temperature (DegF)
UF114 Shop Fit Correction
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field performance may vary with field operational conditions.
Drilling and Intervention
NOV Power Sections CatalogERT Operational Temperature Range By OD Size
REV. 00
PAGE NO: 226
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
650ERT6722 lined with POB
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
650ERT6722 lined with UF114
-0.008
-0.006
-0.004
-0.002
0.000
0.002
0.004
0.006
0.0080 20 40 60 80 100 120
650E
RT67
22 S
tato
r ID
Corr
ectio
n (IN
)
Shop Temperature (DegF)
POB Shop Fit Correction
-0.008
-0.006
-0.004
-0.002
0.000
0.002
0.004
0.006
0.0080 20 40 60 80 100 120
650E
RT67
22 S
tato
r ID
Corr
ectio
n (IN
)Shop Temperature (DegF)
UF114 Shop Fit Correction
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field performance may vary with field operational conditions.
Drilling and Intervention
NOV Power Sections CatalogERT Operational Temperature Range By OD Size
REV. 00
PAGE NO: 227
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
650ERT6727 lined with POB
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
650ERT6727 lined with UF114
-0.008
-0.006
-0.004
-0.002
0.000
0.002
0.004
0.006
0.0080 20 40 60 80 100 120
650E
RT67
27 S
tato
r ID
Corr
ectio
n (IN
)
Shop Temperature (DegF)
POB Shop Fit Correction
-0.008
-0.006
-0.004
-0.002
0.000
0.002
0.004
0.006
0.0080 20 40 60 80 100 120
650E
RT67
27 S
tato
r ID
Corr
ectio
n (IN
)Shop Temperature (DegF)
UF114 Shop Fit Correction
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field performance may vary with field operational conditions.
Drilling and Intervention
NOV Power Sections CatalogERT Operational Temperature Range By OD Size
REV. 00
PAGE NO: 228
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
675ERT6729 lined with POB
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
675ERT6729 lined with UF114
-0.008
-0.006
-0.004
-0.002
0.000
0.002
0.004
0.006
0.0080 20 40 60 80 100 120
675E
RT67
29 S
tato
r ID
Corr
ectio
n (IN
)
Shop Temperature (DegF)
POB Shop Fit Correction
-0.008
-0.006
-0.004
-0.002
0.000
0.002
0.004
0.006
0.0080 20 40 60 80 100 120
675E
RT67
29 S
tato
r ID
Corr
ectio
n (IN
)Shop Temperature (DegF)
UF114 Shop Fit Correction
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field performance may vary with field operational conditions.
Drilling and Intervention
NOV Power Sections CatalogERT Operational Temperature Range By OD Size
REV. 00
PAGE NO: 229
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
675ERT6731 lined with POB
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
675ERT6731 lined with UF114
-0.010
-0.008
-0.006
-0.004
-0.002
0.000
0.002
0.004
0.006
0.008
0.0100 20 40 60 80 100 120
675E
RT67
31 S
tato
r ID
Corr
ectio
n (IN
)
Shop Temperature (DegF)
POB Shop Fit Correction
-0.008
-0.006
-0.004
-0.002
0.000
0.002
0.004
0.006
0.0080 20 40 60 80 100 120
675E
RT67
31 S
tato
r ID
Corr
ectio
n (IN
)Shop Temperature (DegF)
UF114 Shop Fit Correction
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field performance may vary with field operational conditions.
Drilling and Intervention
NOV Power Sections CatalogERT Operational Temperature Range By OD Size
REV. 00
PAGE NO: 230
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
675ERT6748 lined with POB
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
675ERT6748 lined with UF114
-0.010
-0.008
-0.006
-0.004
-0.002
0.000
0.002
0.004
0.006
0.008
0.0100 20 40 60 80 100 120
675E
RT67
48 S
tato
r ID
Corr
ectio
n (IN
)
Shop Temperature (DegF)
POB Shop Fit Correction
-0.008
-0.006
-0.004
-0.002
0.000
0.002
0.004
0.006
0.0080 20 40 60 80 100 120
675E
RT67
48 S
tato
r ID
Corr
ectio
n (IN
)Shop Temperature (DegF)
UF114 Shop Fit Correction
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field performance may vary with field operational conditions.
Drilling and Intervention
NOV Power Sections CatalogERT Operational Temperature Range By OD Size
REV. 00
PAGE NO: 231
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
675ERTcr4570 lined with POB
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
675ERTcr4570 lined with UF114
-0.006
-0.004
-0.002
0.000
0.002
0.004
0.0060 20 40 60 80 100 120
675E
RTcr
4570
Sta
tor I
D Co
rrec
tion
(IN)
Shop Temperature (DegF)
POB Shop Fit Correction
-0.005
-0.004
-0.003
-0.002
-0.001
0.000
0.001
0.002
0.003
0.004
0.0050 20 40 60 80 100 120
675E
RTcr
4570
Sta
tor I
D Co
rrec
tion
(IN)
Shop Temperature (DegF)
UF114 Shop Fit Correction
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field performance may vary with field operational conditions.
Drilling and Intervention
NOV Power Sections CatalogERT Operational Temperature Range By OD Size
REV. 00
PAGE NO: 232
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
675ERTcr6750 lined with POB
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
675ERTcr6750 lined with UF114
-0.008
-0.006
-0.004
-0.002
0.000
0.002
0.004
0.006
0.0080 20 40 60 80 100 120
675E
RTcr
6750
Sta
tor I
D Co
rrec
tion
(IN)
Shop Temperature (DegF)
POB Shop Fit Correction
-0.005
-0.004
-0.003
-0.002
-0.001
0.000
0.001
0.002
0.003
0.004
0.0050 20 40 60 80 100 120
675E
RTcr
6750
Sta
tor I
D Co
rrec
tion
(IN)
Shop Temperature (DegF)
UF114 Shop Fit Correction
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field performance may vary with field operational conditions.
Drilling and Intervention
NOV Power Sections CatalogERT Operational Temperature Range By OD Size
REV. 00
PAGE NO: 233
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
675ERTcr7830 lined with POB
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
675ERTcr7830 lined with UF114
-0.004
-0.003
-0.002
-0.001
0.000
0.001
0.002
0.003
0.0040 20 40 60 80 100 120
675E
RTcr
7830
Sta
tor I
D Co
rrec
tion
(IN)
Shop Temperature (DegF)
POB Shop Fit Correction
-0.004
-0.003
-0.002
-0.001
0.000
0.001
0.002
0.003
0.0040 20 40 60 80 100 120
675E
RTcr
7830
Sta
tor I
D Co
rrec
tion
(IN)
Shop Temperature (DegF)
UF114 Shop Fit Correction
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field performance may vary with field operational conditions.
Drilling and Intervention
NOV Power Sections CatalogERT Operational Temperature Range By OD Size
REV. 00
PAGE NO: 234
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
675ERTcr7850 lined with POB
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
675ERTcr7850 lined with UF114
-0.004
-0.003
-0.002
-0.001
0.000
0.001
0.002
0.003
0.0040 20 40 60 80 100 120
675E
RTcr
7850
Sta
tor I
D Co
rrec
tion
(IN)
Shop Temperature (DegF)
POB Shop Fit Correction
-0.005
-0.004
-0.003
-0.002
-0.001
0.000
0.001
0.002
0.003
0.004
0.0050 20 40 60 80 100 120
675E
RTcr
7850
Sta
tor I
D Co
rrec
tion
(IN)
Shop Temperature (DegF)
UF114 Shop Fit Correction
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field performance may vary with field operational conditions.
Drilling and Intervention
NOV Power Sections CatalogERT Operational Temperature Range By OD Size
REV. 00
PAGE NO: 235
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
800ERT5652 lined with POB
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
800ERT5652 lined with UF114
-0.010
-0.008
-0.006
-0.004
-0.002
0.000
0.002
0.004
0.006
0.008
0.0100 20 40 60 80 100 120
800E
RT56
52 S
tato
r ID
Corr
ectio
n (IN
)
Shop Temperature (DegF)
POB Shop Fit Correction
-0.008
-0.006
-0.004
-0.002
0.000
0.002
0.004
0.006
0.0080 20 40 60 80 100 120
800E
RT56
52 S
tato
r ID
Corr
ectio
n (IN
)Shop Temperature (DegF)
UF114 Shop Fit Correction
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field performance may vary with field operational conditions.
Drilling and Intervention
NOV Power Sections CatalogERT Operational Temperature Range By OD Size
REV. 00
PAGE NO: 236
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
825ERTcr7840 lined with POB
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
825ERTcr7840 lined with UF114
-0.008
-0.006
-0.004
-0.002
0.000
0.002
0.004
0.006
0.0080 20 40 60 80 100 120
825E
RTcr
7840
Sta
tor I
D Co
rrec
tion
(IN)
Shop Temperature (DegF)
POB Shop Fit Correction
-0.006
-0.004
-0.002
0.000
0.002
0.004
0.0060 20 40 60 80 100 120
825E
RTcr
7840
Sta
tor I
D Co
rrec
tion
(IN)
Shop Temperature (DegF)
UF114 Shop Fit Correction
Temperature plots are for reference only. Interference fit data and dimensions subject to change without notice. Actual field performance may vary with field operational conditions.
Drilling and Intervention
NOV Power Sections CatalogERT Operational Temperature Range By OD Size
REV. 00
PAGE NO: 237
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
965ERT6735 lined with POB
0.020
0.015
0.010
0.005
0.000
-0.005
-0.010
-0.015
-0.020
-0.025
-0.030
-0.035
-0.040
-0.045
-0.05075 100 125 150 175 200 225 250 275 300 325 350 375
Shop
Fit
(IN)
Temperature (DegF)
965ERT6735 lined with UF114
-0.010
-0.008
-0.006
-0.004
-0.002
0.000
0.002
0.004
0.006
0.008
0.0100 20 40 60 80 100 120
965E
RT67
35 S
tato
r ID
Corr
ectio
n (IN
)
Shop Temperature (DegF)
POB Shop Fit Correction
-0.008
-0.006
-0.004
-0.002
0.000
0.002
0.004
0.006
0.0080 20 40 60 80 100 120
965E
RT67
35 S
tato
r ID
Corr
ectio
n (IN
)Shop Temperature (DegF)
UF114 Shop Fit Correction
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 238
in. in.
in. in.
in. in.
in. in.
in.
in. in.
in. in.
lbs lbs
STD 2.249 0.011
OS
2.256
Alt. Stator OD (in.) 5.000
Reline Lengths (in.) Max 128.0
Size
Head Length 6.00 Side 2:
Weight 138 Weight 320 Stall Pressure
8.0
Minor Fit
Torque at Max Rec Pressure
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque
Stator Minors and Fit (in.)
UF114
475ERT45364.75" 4:5 Lobes 3.6 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPM
Avg. Diameter 2.260 Tube OD 4.75 Rev per Unit Volume 1.07 Rev/Gal
Overall Length 120.0 Overall Length 128.0 Flow Range 150-300
Power Section ERT Spec (Imperial Units)
Eccentricity 0.250 Tube ID 3.750 No Load Pressure Loss 125 psi
Contour Length 114.0 Contour Length 112.0 Speed Range 160-320 RPM
Head Diameter 2.750 Side 1: 8.0 720 psiMajor Diameter 2.760 Rubber Cut-back UF114 POB-280XT
821 psiMax Recommended Pressure
5,440 ft-lbs 7,180 ft-lbs2,975 psi2,124 ft-lbs 2,478 ft-lbs
3,150 psi
Fit Minor Fit
POB
Minor
280XT
0.004 2.251 0.009
Min 122.0
2-OS
Alt. Rotor Diameter (in.) 2.246
2-US
US
0
0.005
0.01
0.015
0.02
0.025
0 50 100 150 200 250
Fit
In
cre
ase (
in)
Change in Temperature (F)
Fit Increase
150 GPM
225 GPM
300 GPM
0
50
100
150
200
250
300
350
0 250 500 750 1,000 1,250
Sp
eed
(rp
m)
Speed
Differential Pressure (psi)
0
500
1,000
1,500
2,000
2,500
3,000
3,500
0 200 400 600 800 1,000 1,200
To
rqu
e (
ft-lbs)
Torque
Differential Pressure (psi)
150 GPM
225 GPM
300 GPM
0
20
40
60
80
100
120
140
160
180
200
0 200 400 600 800 1,000 1,200
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
475ERT4536 4.75” 4:5 Lobes 3.6 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 239
in. in.
in. in.
in. in.
in. in.
in.
in. in.
in. in.
lbs lbs
STD 2.250 0.010
OS
2.259
2.245
Alt. Stator OD (in.) 5.000
Reline Lengths (in.) Max 200.0
Size
Head Length 6.00 Side 2:
Weight 204 Weight 500 Stall Pressure
24.0
Minor Fit
Torque at Max Rec Pressure
Thread Form 2 7/8" API PAC Material Alloy Steel Stall Torque
Stator Minors and Fit (in.)
UF114
475ERT45544.75" 4:5 Lobes 5.4 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPM
Avg. Diameter 2.260 Tube OD 4.75 Rev per Unit Volume 1.07 Rev/Gal
Overall Length 176.5 Overall Length 200.0 Flow Range 150-300
Power Section ERT Spec (Imperial Units)
Eccentricity 0.250 Tube ID 3.750 No Load Pressure Loss 175 psi
Contour Length 170.5 Contour Length 168.0 Speed Range 160-320 RPM
Head Diameter 3.150 Side 1: 8.0 1,080 psiMajor Diameter 2.760 Rubber Cut-back UF114 POB-280XT
1,231 psiMax Recommended Pressure
7,130 ft-lbs 9,050 ft-lbs3,400 psi3,131 ft-lbs 3,645 ft-lbs
3,850 psi
Fit Minor Fit
POB
Minor
280XT
0.001
Min 194.0
2-OS
Alt. Rotor Diameter (in.) 2.250
2-US
US
0
0.005
0.01
0.015
0.02
0.025
0 50 100 150 200 250
Fit
In
cre
ase (
in)
Change in Temperature (F)
Fit Increase
150 GPM
225 GPM
300 GPM
0
50
100
150
200
250
300
350
0 250 500 750 1,000 1,250 1,500 1,750
Sp
eed
(rp
m)
Speed
Differential Pressure (psi)
0
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
4,500
5,000
0 500 1,000 1,500 2,000
To
rqu
e (
ft-lbs)
Torque
Differential Pressure (psi)
150 GPM
225 GPM
300 GPM
0
50
100
150
200
250
300
0 500 1,000 1,500 2,000
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
475ERT4554 4.75” 4:5 Lobes 5.4 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 240
in. in.
in. in.
in. in.
in. in.
in.
in. in.
in. in.
lbs lbs
STD 2.530 0.007
OS
2.533
Alt. Stator OD (in.) 5.000
Reline Lengths (in.) Max 182.0
Size
Head Length 6.00 Side 2:
Weight 191 Weight 379 Stall Pressure
24.0
Minor Fit
Torque at Max Rec Pressure
Thread Form 2 3/8" PAC Material Alloy Steel Stall Torque
Stator Minors and Fit (in.)
UF114
475ERT67254.75" 6:7 Lobes 2.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPM
Avg. Diameter 2.537 Tube OD 4.75 Rev per Unit Volume 0.45 Rev/Gal
Overall Length 158.0 Overall Length 182.0 Flow Range 125-325
Power Section ERT Spec (Imperial Units)
Eccentricity 0.181 Tube ID 3.750 No Load Pressure Loss 190 psi
Contour Length 152.0 Contour Length 150.0 Speed Range 55-145 RPM
Head Diameter 3.150 Side 1: 8.0 500 psiMajor Diameter 2.899 Rubber Cut-back UF114 POB-280XT
570 psiMax Recommended Pressure
7,850 ft-lbs 10,300 ft-lbs2,100 psi2,789 ft-lbs 3,244 ft-lbs
2,400 psi
Fit Minor Fit
POB
Minor
280XT
0.004
Min 176.0
2-OS
Alt. Rotor Diameter (in.) 2.533
2-US
US
0
0.005
0.01
0.015
0.02
0.025
0 50 100 150 200 250
Fit
In
cre
ase (
in)
Change in Temperature (F)
Fit Increase
125 GPM
225 GPM
325 GPM
0
20
40
60
80
100
120
140
160
0 250 500 750 1,000
Sp
eed
(rp
m)
Speed
Differential Pressure (psi)
0
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
4,500
0 100 200 300 400 500 600 700 800
To
rqu
e (
ft-lbs)
Torque
Differential Pressure (psi)
125 GPM
225 GPM
325 GPM
0
20
40
60
80
100
120
0 100 200 300 400 500 600 700 800
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
475ERT6725 4.75” 6:7 Lobes 2.5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 241
in. in.
in. in.
in. in.
in. in.
in.
in. in.
in. in.
lbs lbs
STD 2.617 0.002
OS 2.635 -0.016 2.636
2.618
2.600
Alt. Stator OD (in.) 5.000
Reline Lengths (in.) Max 187.0
Size
Head Length 6.00 Side 2:
Weight 388 Weight 387 Stall Pressure
8.0
Minor Fit
Torque at Max Rec Pressure
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque
Stator Minors and Fit (in.)
UF114
475ERTcr78384.75" 7:8 Lobes 3.8 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPM
Avg. Diameter 2.619 Tube OD 4.75 Rev per Unit Volume 0.58 Rev/Gal
Overall Length 178.0 Overall Length 187.0 Flow Range 150-300
Power Section ERT Spec (Imperial Units)
Eccentricity 0.163 Tube ID 3.750 No Load Pressure Loss 145 psi
Contour Length 172.0 Contour Length 164.0 Speed Range 87-174 RPM
Head Diameter 2.750 Side 1: 8.0 760 psiMajor Diameter 2.945 Rubber Cut-back UF114 POB-280XT
866 psiMax Recommended Pressure
9,380 ft-lbs 12,240 ft-lbs3,020 psi3,367 ft-lbs 3,915 ft-lbs
3,500 psi
Fit Minor Fit
POB
Minor
280XT
-0.017
0.001
Min 181.0
2-OS
Alt. Rotor Diameter (in.) 2.605
2-US
US
0
0.005
0.01
0.015
0.02
0.025
0 50 100 150 200 250
Fit
In
cre
ase (
in)
Change in Temperature (F)
Fit Increase
150 GPM
225 GPM
300 GPM
0
20
40
60
80
100
120
140
160
180
200
0 250 500 750 1,000 1,250
Sp
eed
(rp
m)
Speed
Differential Pressure (psi)
0
1,000
2,000
3,000
4,000
5,000
6,000
0 200 400 600 800 1,000 1,200 1,400
To
rqu
e (
ft-lbs)
Torque
Differential Pressure (psi)
150 GPM
225 GPM
300 GPM
0
20
40
60
80
100
120
140
160
180
0 200 400 600 800 1,000 1,200 1,400
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
475ERTcr7838 4.75” 7:8 Lobes 3.8 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 242
in. in.
in. in.
in. in.
in. in.
in.
in. in.
in. in.
lbs lbs
STD 2.644 -0.010
OS 2.655 -0.021 2.660
2.649
Alt. Stator OD (in.)
Reline Lengths (in.) Max 246.0
Size
Head Length 6.80 Side 2:
Weight 365 Weight 546 Stall Pressure
11.0
Minor Fit
Torque at Max Rec Pressure
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque
Stator Minors and Fit (in.)
UF114
500ERTcr67805" 6:7 Lobes 8 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPM
Avg. Diameter 2.634 Tube OD 5 Rev per Unit Volume 0.80 Rev/Gal
Overall Length 233.5 Overall Length 246.0 Flow Range 150-350
Power Section ERT Spec (Imperial Units)
Eccentricity 0.192 Tube ID 4.000 No Load Pressure Loss 135 psi
Contour Length 226.7 Contour Length 227.5 Speed Range 120-280 RPM
Head Diameter 2.850 Side 1: 7.5 1,600 psiMajor Diameter 3.018 Rubber Cut-back UF114 POB-280XT
1,824 psiMax Recommended Pressure
13,790 ft-lbs 17,220 ft-lbs5,750 psi4,924 ft-lbs 5,713 ft-lbs
6,640 psi
Fit Minor Fit
POB
Minor
280XT
-0.036
-0.026
-0.015
Min 240.0
2-OS 2.665 -0.031 2.670
Alt. Rotor Diameter (in.)
2-US
US
0
0.005
0.01
0.015
0.02
0.025
0.03
0 50 100 150 200 250
Fit
In
cre
ase (
in)
Change in Temperature (F)
Fit Increase
150 GPM
250 GPM
350 GPM
0
50
100
150
200
250
300
0 250 500 750 1,000 1,250 1,500 1,750 2,000 2,250 2,500 2,750
Sp
eed
(rp
m)
Speed
Differential Pressure (psi)
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
0 500 1,000 1,500 2,000 2,500 3,000
To
rqu
e (
ft-lbs)
Torque
Differential Pressure (psi)
150 GPM
250 GPM
350 GPM
0
50
100
150
200
250
300
350
400
0 500 1,000 1,500 2,000 2,500 3,000
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
500ERTcr6780 5” 6:7 Lobes 8 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 243
in. in.
in. in.
in. in.
in. in.
in.
in. in.
in. in.
lbs lbs
STD 2.695 0.004
OS
2.695
Alt. Stator OD (in.)
Reline Lengths (in.) Max 194.0
Size
Head Length 6.00 Side 2:
Weight 312 Weight 350 Stall Pressure
15.0
Minor Fit
Torque at Max Rec Pressure
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque
Stator Minors and Fit (in.)
UF114
500ERTcr78505" 7:8 Lobes 5 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPM
Avg. Diameter 2.699 Tube OD 5 Rev per Unit Volume 0.62 Rev/Gal
Overall Length 186.0 Overall Length 194.0 Flow Range 150-300
Power Section ERT Spec (Imperial Units)
Eccentricity 0.171 Tube ID 3.900 No Load Pressure Loss 155 psi
Contour Length 180.0 Contour Length 164.0 Speed Range 93-186 RPM
Head Diameter 2.750 Side 1: 15.0 1,000 psiMajor Diameter 3.041 Rubber Cut-back UF114 POB-280XT
1,140 psiMax Recommended Pressure
11,240 ft-lbs 14,660 ft-lbs4,000 psi3,886 ft-lbs 4,516 ft-lbs
4,850 psi
Fit Minor Fit
POB
Minor
280XT
0.004
Min 188.0
2-OS
Alt. Rotor Diameter (in.)
2-US
US
0
0.005
0.01
0.015
0.02
0.025
0 50 100 150 200 250
Fit
In
cre
ase (
in)
Change in Temperature (F)
Fit Increase
150 GPM
225 GPM
300 GPM
0
20
40
60
80
100
120
140
160
180
200
0 250 500 750 1,000 1,250 1,500 1,750
Sp
eed
(rp
m)
Speed
Differential Pressure (psi)
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
0 200 400 600 800 1,000 1,200 1,400 1,600
To
rqu
e (
ft-lbs)
Torque
Differential Pressure (psi)
150 GPM
225 GPM
300 GPM
0
20
40
60
80
100
120
140
160
180
200
0 200 400 600 800 1,000 1,200 1,400 1,600
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
500ERTcr7850 5” 7:8 Lobes 5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 244
in. in.
in. in.
in. in.
in. in.
in.
in. in.
in. in.
lbs lbs
STD 3.252 0.013
OS
3.255
Alt. Stator OD (in.)
Reline Lengths (in.) Max 197.0
Size
Head Length 8.00 Side 2:
Weight 408 Weight 905 Stall Pressure
25.0
Minor Fit
Torque at Max Rec Pressure
Thread Form 3 1/2" API Reg Material Alloy Steel Stall Torque
Stator Minors and Fit (in.)
UF114
650ERT67226.5" 6:7 Lobes 2.2 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPM
Avg. Diameter 3.265 Tube OD 6.5 Rev per Unit Volume 0.22 Rev/Gal
Overall Length 172.5 Overall Length 197.0 Flow Range 250-500
Power Section ERT Spec (Imperial Units)
Eccentricity 0.250 Tube ID 5.000 No Load Pressure Loss 140 psi
Contour Length 164.5 Contour Length 161.5 Speed Range 55-110 RPM
Head Diameter 4.500 Side 1: 10.5 440 psiMajor Diameter 3.765 Rubber Cut-back UF114 POB-280XT
502 psiMax Recommended Pressure
11,650 ft-lbs 16,950 ft-lbs1,800 psi5,454 ft-lbs 6,417 ft-lbs
2,225 psi
Fit Minor Fit
POB
Minor
280XT
0.010
Min 191.0
2-OS
Alt. Rotor Diameter (in.)
2-US
US
0
0.005
0.01
0.015
0.02
0.025
0.03
0.035
0 50 100 150 200 250
Fit
In
cre
ase (
in)
Change in Temperature (F)
Fit Increase
250 GPM
375 GPM
500 GPM
0
20
40
60
80
100
120
0 250 500 750
Sp
eed
(rp
m)
Speed
Differential Pressure (psi)
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
0 100 200 300 400 500 600 700
To
rqu
e (
ft-lbs)
Torque
Differential Pressure (psi)
250 GPM
375 GPM
500 GPM
0
20
40
60
80
100
120
140
160
180
0 100 200 300 400 500 600 700
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
650ERT6722 6.5” 6:7 Lobes 2.2 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 245
in. in.
in. in.
in. in.
in. in.
in.
in. in.
in. in.
lbs lbs
STD 3.250 0.015
OS 3.265 0.000 3.270
3.255
Alt. Stator OD (in.) 7.000
Reline Lengths (in.) Max 230.0
Size
Head Length 8.00 Side 2:
Weight 499 Weight 1075 Stall Pressure
25.0
Minor Fit
Torque at Max Rec Pressure
Thread Form 3 1/2" API Reg Material Alloy Steel Stall Torque
Stator Minors and Fit (in.)
UF114
650ERT67276.5" 6:7 Lobes 2.7 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPM
Avg. Diameter 3.265 Tube OD 6.5 Rev per Unit Volume 0.22 Rev/Gal
Overall Length 205.5 Overall Length 230.0 Flow Range 250-500
Power Section ERT Spec (Imperial Units)
Eccentricity 0.250 Tube ID 5.000 No Load Pressure Loss 150 psi
Contour Length 197.5 Contour Length 194.5 Speed Range 55-112 RPM
Head Diameter 4.750 Side 1: 10.5 540 psiMajor Diameter 3.765 Rubber Cut-back UF114 POB-280XT
616 psiMax Recommended Pressure
14,180 ft-lbs 20,800 ft-lbs2,125 psi6,877 ft-lbs 8,100 ft-lbs
2,700 psi
Fit Minor Fit
POB
Minor
280XT
-0.005
0.010
Min 224.0
2-OS
Alt. Rotor Diameter (in.)
2-US
US
0
0.005
0.01
0.015
0.02
0.025
0.03
0.035
0 50 100 150 200 250
Fit
In
cre
ase (
in)
Change in Temperature (F)
Fit Increase
250 GPM
375 GPM
500 GPM
0
20
40
60
80
100
120
0 250 500 750 1,000
Sp
eed
(rp
m)
Speed
Differential Pressure (psi)
0
2,000
4,000
6,000
8,000
10,000
12,000
0 200 400 600 800 1,000
To
rqu
e (
ft-lbs)
Torque
Differential Pressure (psi)
250 GPM
375 GPM
500 GPM
0
50
100
150
200
250
0 200 400 600 800 1,000
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
650ERT6727 6.5” 6:7 Lobes 2.7 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 246
in. in.
in. in.
in. in.
in. in.
in.
in. in.
in. in.
lbs lbs
STD 3.670 0.003
OS
3.675
3.638
Alt. Stator OD (in.) 7.000
Reline Lengths (in.) Max 202.0
Size
Head Length 8.00 Side 2:
Weight 544 Weight 766 Stall Pressure
25.0
Minor Fit
Torque at Max Rec Pressure
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque
Stator Minors and Fit (in.)
UF114
675ERT67296.75" 6:7 Lobes 2.9 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPM
Avg. Diameter 3.673 Tube OD 6.75 Rev per Unit Volume 0.22 Rev/Gal
Overall Length 177.0 Overall Length 202.0 Flow Range 300-650
Power Section ERT Spec (Imperial Units)
Eccentricity 0.272 Tube ID 5.500 No Load Pressure Loss 210 psi
Contour Length 169.0 Contour Length 166.5 Speed Range 66-143 RPM
Head Diameter 4.127 Side 1: 10.5 580 psiMajor Diameter 4.217 Rubber Cut-back UF114 POB-280XT
661 psiMax Recommended Pressure
17,170 ft-lbs 22,280 ft-lbs2,250 psi6,689 ft-lbs 7,809 ft-lbs
2,650 psi
Fit Minor Fit
POB
Minor
280XT
-0.002
Min 196.0
2-OS
Alt. Rotor Diameter (in.) 3.660
2-US
US
0
0.005
0.01
0.015
0.02
0.025
0.03
0.035
0 50 100 150 200 250
Fit
In
cre
ase (
in)
Change in Temperature (F)
Fit Increase
300 GPM
475 GPM
650 GPM
0
20
40
60
80
100
120
140
160
0 250 500 750 1,000
Sp
eed
(rp
m)
Speed
Differential Pressure (psi)
0
2,000
4,000
6,000
8,000
10,000
12,000
0 200 400 600 800 1,000
To
rqu
e (
ft-lbs)
Torque
Differential Pressure (psi)
300 GPM
475 GPM
650 GPM
0
50
100
150
200
250
0 200 400 600 800 1,000
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
675ERT6729 6.75” 6:7 Lobes 2.9 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 247
in. in.
in. in.
in. in.
in. in.
in.
in. in.
in. in.
lbs lbs
STD 3.632 0.016
OS
3.639
Alt. Stator OD (in.)
Reline Lengths (in.) Max 127.8
Size
Head Length 6.50 Side 2:
Weight 347 Weight 584 Stall Pressure
7.3
Minor Fit
Torque at Max Rec Pressure
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque
Stator Minors and Fit (in.)
UF114
675ERT67316.75" 6:7 Lobes 3.1 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPM
Avg. Diameter 3.648 Tube OD 6.75 Rev per Unit Volume 0.37 Rev/Gal
Overall Length 116.5 Overall Length 127.8 Flow Range 300-650
Power Section ERT Spec (Imperial Units)
Eccentricity 0.279 Tube ID 5.500 No Load Pressure Loss 125 psi
Contour Length 110.0 Contour Length 110.0 Speed Range 110-240 RPM
Head Diameter 4.000 Side 1: 10.5 620 psiMajor Diameter 4.206 Rubber Cut-back UF114 POB-280XT
707 psiMax Recommended Pressure
12,350 ft-lbs 16,220 ft-lbs2,250 psi4,827 ft-lbs 5,631 ft-lbs
2,700 psi
Fit Minor Fit
POB
Minor
280XT
0.009
Min 121.8
2-OS
Alt. Rotor Diameter (in.) 3.629
2-US
US
0
0.005
0.01
0.015
0.02
0.025
0.03
0.035
0 50 100 150 200 250
Fit
In
cre
ase (
in)
Change in Temperature (F)
Fit Increase
300 GPM
475 GPM
650 GPM
0
50
100
150
200
250
300
0 250 500 750 1,000
Sp
eed
(rp
m)
Speed
Differential Pressure (psi)
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
0 200 400 600 800 1,000
To
rqu
e (
ft-lbs)
Torque
Differential Pressure (psi)
300 GPM
475 GPM
650 GPM
0
50
100
150
200
250
300
350
0 200 400 600 800 1,000
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
675ERT6731 6.75” 6:7 Lobes 3.1 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 248
in. in.
in. in.
in. in.
in. in.
in.
in. in.
in. in.
lbs lbs
STD 3.632 0.016
OS 3.647 0.001 3.649
3.639
3.629
Alt. Stator OD (in.)
Reline Lengths (in.) Max 202.0
Size
Head Length 8.00 Side 2:
Weight 530 Weight 885 Stall Pressure
25.0
Minor Fit
Torque at Max Rec Pressure
Thread Form 3 1/2" API Reg Material Alloy Steel Stall Torque
Stator Minors and Fit (in.)
UF114
675ERT67486.75" 6:7 Lobes 4.8 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPM
Avg. Diameter 3.648 Tube OD 6.75 Rev per Unit Volume 0.37 Rev/Gal
Overall Length 177.0 Overall Length 202.0 Flow Range 300-650
Power Section ERT Spec (Imperial Units)
Eccentricity 0.279 Tube ID 5.500 No Load Pressure Loss 135 psi
Contour Length 169.0 Contour Length 166.5 Speed Range 110-240 RPM
Head Diameter 4.750 Side 1: 10.5 960 psiMajor Diameter 4.206 Rubber Cut-back UF114 POB-280XT
1,094 psiMax Recommended Pressure
19,300 ft-lbs 24,330 ft-lbs3,450 psi6,592 ft-lbs 7,624 ft-lbs
4,110 psi
Fit Minor Fit
POB
Minor
280XT
-0.001
0.009
Min 196.0
2-OS
Alt. Rotor Diameter (in.) 3.633
2-US
US
0
0.005
0.01
0.015
0.02
0.025
0.03
0.035
0 50 100 150 200 250
Fit
In
cre
ase (
in)
Change in Temperature (F)
Fit Increase
300 GPM
475 GPM
650 GPM
0
50
100
150
200
250
300
0 250 500 750 1,000 1,250 1,500 1,750
Sp
eed
(rp
m)
Speed
Differential Pressure (psi)
0
2,000
4,000
6,000
8,000
10,000
12,000
0 200 400 600 800 1,000 1,200 1,400 1,600
To
rqu
e (
ft-lbs)
Torque
Differential Pressure (psi)
300 GPM
475 GPM
650 GPM
0
50
100
150
200
250
300
350
400
450
0 200 400 600 800 1,000 1,200 1,400 1,600
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
675ERT6748 6.75” 6:7 Lobes 4.8 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 249
in. in.
in. in.
in. in.
in. in.
in.
in. in.
in. in.
lbs lbs
STD 3.511 -0.001
OS 3.515 -0.005 3.520
3.515
Alt. Stator OD (in.)
Reline Lengths (in.) Max 210.0
Size
Head Length 7.00 Side 2:
Weight 579 Weight 618 Stall Pressure
7.5
Minor Fit
Torque at Max Rec Pressure
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque
Stator Minors and Fit (in.)
UF114
675ERTcr45706.75" 4:5 Lobes 7 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPM
Avg. Diameter 3.510 Tube OD 6.75 Rev per Unit Volume 0.50 Rev/Gal
Overall Length 202.5 Overall Length 210.0 Flow Range 300-600
Power Section ERT Spec (Imperial Units)
Eccentricity 0.355 Tube ID 5.500 No Load Pressure Loss 150 psi
Contour Length 195.5 Contour Length 195.0 Speed Range 150-300 RPM
Head Diameter 4.000 Side 1: 7.5 1,400 psiMajor Diameter 4.220 Rubber Cut-back UF114 POB-280XT
1,596 psiMax Recommended Pressure
14,740 ft-lbs 18,600 ft-lbs3,650 psi7,506 ft-lbs 8,752 ft-lbs
3,850 psi
Fit Minor Fit
POB
Minor
280XT
-0.010
-0.005
Min 204.0
2-OS
Alt. Rotor Diameter (in.)
2-US
US
0
0.005
0.01
0.015
0.02
0.025
0.03
0 50 100 150 200 250
Fit
In
cre
ase (
in)
Change in Temperature (F)
Fit Increase
300 GPM
450 GPM
600 GPM
0
50
100
150
200
250
300
350
0 250 500 750 1,000 1,250 1,500 1,750 2,000 2,250 2,500
Sp
eed
(rp
m)
Speed
Differential Pressure (psi)
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
0 500 1,000 1,500 2,000 2,500
To
rqu
e (
ft-lbs)
Torque
Differential Pressure (psi)
300 GPM
450 GPM
600 GPM
0
100
200
300
400
500
600
700
0 500 1,000 1,500 2,000 2,500
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
675ERTcr4570 6.75” 4:5 Lobes 7 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 250
in. in.
in. in.
in. in.
in. in.
in.
in. in.
in. in.
lbs lbs
STD 3.740 0.000
OS 3.750 -0.010 3.755
3.748
Alt. Stator OD (in.)
Reline Lengths (in.) Max 200.0
Size
Head Length 7.67 Side 2:
Weight 602 Weight 745 Stall Pressure
7.3
Minor Fit
Torque at Max Rec Pressure
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque
Stator Minors and Fit (in.)
UF114
675ERTcr67506.75" 6:7 Lobes 5 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPM
Avg. Diameter 3.740 Tube OD 6.75 Rev per Unit Volume 0.28 Rev/Gal
Overall Length 194.0 Overall Length 200.0 Flow Range 300-600
Power Section ERT Spec (Imperial Units)
Eccentricity 0.288 Tube ID 5.500 No Load Pressure Loss 135 psi
Contour Length 186.3 Contour Length 185.5 Speed Range 84-168 RPM
Head Diameter 4.000 Side 1: 7.3 1,000 psiMajor Diameter 4.316 Rubber Cut-back UF114 POB-280XT
1,140 psiMax Recommended Pressure
21,550 ft-lbs 27,210 ft-lbs2,885 psi9,397 ft-lbs 10,925 ft-lbs
3,300 psi
Fit Minor Fit
POB
Minor
280XT
-0.015
-0.008
Min 194.0
2-OS
Alt. Rotor Diameter (in.)
2-US
US
0
0.005
0.01
0.015
0.02
0.025
0.03
0 50 100 150 200 250
Fit
In
cre
ase (
in)
Change in Temperature (F)
Fit Increase
300 GPM
450 GPM
600 GPM
0
20
40
60
80
100
120
140
160
180
0 250 500 750 1,000 1,250 1,500 1,750
Sp
eed
(rp
m)
Speed
Differential Pressure (psi)
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
0 200 400 600 800 1,000 1,200 1,400 1,600
To
rqu
e (
ft-lbs)
Torque
Differential Pressure (psi)
300 GPM
450 GPM
600 GPM
0
50
100
150
200
250
300
350
400
450
0 200 400 600 800 1,000 1,200 1,400 1,600
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
675ERTcr6750 6.75” 6:7 Lobes 5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 251
in. in.
in. in.
in. in.
in. in.
in.
in. in.
in. in.
lbs lbs
STD 4.018 -0.010
OS
4.020
Alt. Stator OD (in.)
Reline Lengths (in.) Max 125.0
Size
Head Length 7.16 Side 2:
Weight 433 Weight 466 Stall Pressure
7.3
Minor Fit
Torque at Max Rec Pressure
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque
Stator Minors and Fit (in.)
UF114
675ERTcr78306.75" 7:8 Lobes 3 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPM
Avg. Diameter 4.008 Tube OD 6.75 Rev per Unit Volume 0.28 Rev/Gal
Overall Length 118.5 Overall Length 125.0 Flow Range 300-600
Power Section ERT Spec (Imperial Units)
Eccentricity 0.256 Tube ID 5.500 No Load Pressure Loss 125 psi
Contour Length 111.3 Contour Length 110.5 Speed Range 84-168 RPM
Head Diameter 4.000 Side 1: 7.3 600 psiMajor Diameter 4.520 Rubber Cut-back UF114 POB-280XT
684 psiMax Recommended Pressure
14,950 ft-lbs 19,630 ft-lbs2,115 psi5,668 ft-lbs 6,582 ft-lbs
2,450 psi
Fit Minor Fit
POB
Minor
280XT
-0.012
Min 119.0
2-OS
Alt. Rotor Diameter (in.)
2-US
US
0
0.005
0.01
0.015
0.02
0.025
0 50 100 150 200 250
Fit
In
cre
ase (
in)
Change in Temperature (F)
Fit Increase
300 GPM
450 GPM
600 GPM
0
20
40
60
80
100
120
140
160
180
0 250 500 750 1,000
Sp
eed
(rp
m)
Speed
Differential Pressure (psi)
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
0 200 400 600 800 1,000
To
rqu
e (
ft-lbs)
Torque
Differential Pressure (psi)
300 GPM
450 GPM
600 GPM
0
50
100
150
200
250
300
0 200 400 600 800 1,000
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
675ERTcr7830 6.75” 7:8 Lobes 3 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 252
in. in.
in. in.
in. in.
in. in.
in.
in. in.
in. in.
lbs lbs
0.5-OS 4.010 -0.002
OS 4.018 -0.010 4.019
4.011
Alt. Stator OD (in.)
Reline Lengths (in.) Max 194.5
Size
Head Length 7.40 Side 2:
Weight 703 Weight 725 Stall Pressure
7.3
Minor Fit
Torque at Max Rec Pressure
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque
Stator Minors and Fit (in.)
UF114
675ERTcr78506.75" 7:8 Lobes 5 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPM
Avg. Diameter 4.008 Tube OD 6.75 Rev per Unit Volume 0.28 Rev/Gal
Overall Length 187.0 Overall Length 194.5 Flow Range 300-600
Power Section ERT Spec (Imperial Units)
Eccentricity 0.256 Tube ID 5.500 No Load Pressure Loss 160 psi
Contour Length 179.6 Contour Length 180.0 Speed Range 84-168 RPM
Head Diameter 4.000 Side 1: 7.3 1,000 psiMajor Diameter 4.520 Rubber Cut-back UF114 POB-280XT
1,140 psiMax Recommended Pressure
24,540 ft-lbs 30,290 ft-lbs3,100 psi9,496 ft-lbs 11,014 ft-lbs
3,750 psi
Fit Minor Fit
POB
Minor
280XT
-0.011
-0.003
Min 188.5
2-OS
Alt. Rotor Diameter (in.)
US
STD 4.002 0.006 4.003 0.005
0
0.005
0.01
0.015
0.02
0.025
0 50 100 150 200 250
Fit
In
cre
ase (
in)
Change in Temperature (F)
Fit Increase
300 GPM
450 GPM
600 GPM
0
20
40
60
80
100
120
140
160
180
0 250 500 750 1,000 1,250 1,500 1,750
Sp
eed
(rp
m)
Speed
Differential Pressure (psi)
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
0 200 400 600 800 1,000 1,200 1,400 1,600
To
rqu
e (
ft-lbs)
Torque
Differential Pressure (psi)
300 GPM
450 GPM
600 GPM
0
50
100
150
200
250
300
350
400
450
0 200 400 600 800 1,000 1,200 1,400 1,600
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
675ERTcr7850 6.75” 7:8 Lobes 5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 253
in. in.
in. in.
in. in.
in. in.
in.
in. in.
in. in.
lbs lbs
STD 3.959 0.016
OS
3.970
Alt. Stator OD (in.)
Reline Lengths (in.) Max 240.0
Size
Head Length 7.00 Side 2:
Weight 810 Weight 1700 Stall Pressure
10.0
Minor Fit
Torque at Max Rec Pressure
Thread Form 3 1/2" IF or Reg Material Alloy Steel Stall Torque
Stator Minors and Fit (in.)
UF114
800ERT56528" 5:6 Lobes 5.2 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPM
Avg. Diameter 3.975 Tube OD 8 Rev per Unit Volume 0.24 Rev/Gal
Overall Length 228.0 Overall Length 240.0 Flow Range 300-900
Power Section ERT Spec (Imperial Units)
Eccentricity 0.360 Tube ID 6.250 No Load Pressure Loss 100 psi
Contour Length 221.0 Contour Length 220.0 Speed Range 71-215 RPM
Head Diameter 4.750 Side 1: 10.0 1,040 psiMajor Diameter 4.695 Rubber Cut-back UF114 POB-280XT
1,186 psiMax Recommended Pressure
27,100 ft-lbs 34,175 ft-lbs3,000 psi
11,712 ft-lbs 13,609 ft-lbs3,450 psi
Fit Minor Fit
POB
Minor
280XT
0.005
Min 234.0
2-OS
Alt. Rotor Diameter (in.)
2-US
US
0
0.005
0.01
0.015
0.02
0.025
0.03
0.035
0.04
0 50 100 150 200 250
Fit
In
cre
ase (
in)
Change in Temperature (F)
Fit Increase
300 GPM
600 GPM
900 GPM
0
50
100
150
200
250
0 250 500 750 1,000 1,250 1,500 1,750
Sp
eed
(rp
m)
Speed
Differential Pressure (psi)
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
20,000
0 500 1,000 1,500 2,000
To
rqu
e (
ft-lbs)
Torque
Differential Pressure (psi)
300 GPM
600 GPM
900 GPM
0
100
200
300
400
500
600
700
800
0 500 1,000 1,500 2,000
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
800ERT5652 8” 5:6 Lobes 5.2 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 254
in. in.
in. in.
in. in.
in. in.
in.
in. in.
in. in.
lbs lbs
STD 4.590 0.010
OS
4.597
Alt. Stator OD (in.)
Reline Lengths (in.) Max 212.3
Size
Head Length 8.00 Side 2:
Weight 950 Weight 1346 Stall Pressure
13.0
Minor Fit
Torque at Max Rec Pressure
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque
Stator Minors and Fit (in.)
UF114
825ERTcr78408.25" 7:8 Lobes 4 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPM
Avg. Diameter 4.600 Tube OD 8.25 Rev per Unit Volume 0.16 Rev/Gal
Overall Length 196.2 Overall Length 212.3 Flow Range 300-900
Power Section ERT Spec (Imperial Units)
Eccentricity 0.293 Tube ID 6.440 No Load Pressure Loss 160 psi
Contour Length 188.2 Contour Length 187.3 Speed Range 49-146 RPM
Head Diameter 4.750 Side 1: 13.0 800 psiMajor Diameter 5.186 Rubber Cut-back UF114 POB-280XT
912 psiMax Recommended Pressure
35,740 ft-lbs 43,000 ft-lbs2,685 psi
13,137 ft-lbs 15,217 ft-lbs3,200 psi
Fit Minor Fit
POB
Minor
280XT
0.003
Min 206.3
2-OS
Alt. Rotor Diameter (in.)
2-US
US
0
0.005
0.01
0.015
0.02
0.025
0.03
0.035
0 50 100 150 200 250
Fit
In
cre
ase (
in)
Change in Temperature (F)
Fit Increase
300 GPM
600 GPM
900 GPM
0
20
40
60
80
100
120
140
160
0 250 500 750 1,000 1,250 1,500
Sp
eed
(rp
m)
Speed
Differential Pressure (psi)
0
5,000
10,000
15,000
20,000
25,000
0 200 400 600 800 1,000 1,200 1,400
To
rqu
e (
ft-lbs)
Torque
Differential Pressure (psi)
300 GPM
600 GPM
900 GPM
0
100
200
300
400
500
600
0 200 400 600 800 1,000 1,200 1,400
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
825ERTcr7840 8.25” 7:8 Lobes 4 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 255
in. in.
in. in.
in. in.
in. in.
in.
in. in.
in. in.
lbs lbs
STD 5.352 0.020
OS 5.369 0.003 5.376
5.359
5.339
Alt. Stator OD (in.) 11.250
Reline Lengths (in.) Max 210.0
Size
Head Length 8.00 Side 2:
Weight 1200 Weight 1950 Stall Pressure
14.0
Minor Fit
Torque at Max Rec Pressure
Thread Form 4" API FH Material Alloy Steel Stall Torque
Stator Minors and Fit (in.)
UF114
962ERT67359.625" 6:7 Lobes 3.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
GPM
Avg. Diameter 5.372 Tube OD 9.625 Rev per Unit Volume 0.10 Rev/Gal
Overall Length 197.5 Overall Length 210.0 Flow Range 600-1200
Power Section ERT Spec (Imperial Units)
Eccentricity 0.412 Tube ID 7.850 No Load Pressure Loss 100 psi
Contour Length 189.5 Contour Length 183.0 Speed Range 65-125 RPM
Head Diameter 5.900 Side 1: 14.0 700 psiMajor Diameter 6.196 Rubber Cut-back UF114 POB-280XT
798 psiMax Recommended Pressure
51,425 ft-lbs 65,075 ft-lbs2,400 psi
18,576 ft-lbs 21,453 ft-lbs2,750 psi
Fit Minor Fit
POB
Minor
280XT
-0.004
0.013
Min 204.0
2-OS
Alt. Rotor Diameter (in.) 5.357
2-US
US
0
0.005
0.01
0.015
0.02
0.025
0.03
0.035
0.04
0 50 100 150 200 250
Fit
In
cre
ase (
in)
Change in Temperature (F)
Fit Increase
600 GPM
900 GPM
1200 GPM
0
20
40
60
80
100
120
140
0 250 500 750 1,000 1,250
Sp
eed
(rp
m)
Speed
Differential Pressure (psi)
0
5,000
10,000
15,000
20,000
25,000
30,000
0 200 400 600 800 1,000 1,200
To
rqu
e (
ft-lbs)
Torque
Differential Pressure (psi)
600 GPM
900 GPM
1200 GPM
0
100
200
300
400
500
600
0 200 400 600 800 1,000 1,200
Mech
an
ical P
ow
er
(hp)
Mechanical Power
Differential Pressure (psi)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
962ERT6735 9.625” 6:7 Lobes 3.5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 256
mm mm
mm mm
mm mm
mm mm
mm
mm mm
mm mm
kg kg
Alt. Rotor Diameter (mm) 57.0
Reline Lengths (mm) Max 3251 Min 3099
Alt. Stator OD (mm) 127.0
2-OS
OS
STD 57.12 0.28 57.30 0.10 57.18 0.23
US
2-US
Size Minor Fit Minor Fit Minor Fit
UF114 POB 280XT
Stator Minors and Fit (mm) at 21oC
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 7,37620,512 kPa 21,718 kPa
NmWeight 62.6 Weight 145.1 Stall Pressure
Nm 9,735 Nm
Head Length 152.4 Side 2: 203.2 Torque at Max Rec Pressure 2,880 Nm 3,359 Head Diameter 69.9 Side 1: 203.2 Max Recommended Pressure 4,964 kPa 5,659 Major Diameter 70.1 Rubber Cut-back UF114 POB-280XT
kPa
RPM
Eccentricity 6.4 Tube ID 95.25 No Load Pressure Loss 862 kPa
Contour Length 2896 Contour Length 2845 Speed Range 160-320
Power Section ERT Spec (Metric Units) 475ERT45364.75" 4:5 Lobes 3.6 Stages
Rotor Specifications Stator Specifications Performance Specifications
lpm
Avg. Diameter 57.4 Tube OD 120.7 Rev per Unit Volume 0.28 Rev/liter
Overall Length 3048 Overall Length 3251 Flow Range 568-1136
0
0.1
0.2
0.3
0.4
0.5
0.6
0 20 40 60 80 100 120 140
Fit
In
cre
ase (
mm
)
Change in Temperature (C)
Fit Increase
568 lpm
852 lpm
1136 lpm
0
50
100
150
200
250
300
350
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
Sp
eed
(rp
m)
Speed
Differential Pressure (kPa)
0
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
4,500
5,000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
To
rqu
e (
Nm
)
Torque
Differential Pressure (kPa)
568 lpm
852 lpm
1136 lpm
0
20
40
60
80
100
120
140
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
475ERT4536 4.75” 4:5 Lobes 3.6 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 257
mm mm
mm mm
mm mm
mm mm
mm
mm mm
mm mm
kg kg
Alt. Rotor Diameter (mm) 57.2 57.0
Reline Lengths (mm) Max 5080 Min 4928
Alt. Stator OD (mm) 127.0
2-OS
OS
STD 57.15 0.25 57.38 0.03
US
2-US
Size Minor Fit Minor Fit Minor Fit
UF114 POB 280XT
Stator Minors and Fit (mm) at 21oC
Thread Form 2 7/8" API PAC Material Alloy Steel Stall Torque 9,66723,442 kPa 26,545 kPa
NmWeight 92.5 Weight 226.8 Stall Pressure
Nm 12,270 Nm
Head Length 152.4 Side 2: 609.6 Torque at Max Rec Pressure 4,245 Nm 4,942 Head Diameter 80.0 Side 1: 203.2 Max Recommended Pressure 7,446 kPa 8,489 Major Diameter 70.1 Rubber Cut-back UF114 POB-280XT
kPa
RPM
Eccentricity 6.4 Tube ID 95.25 No Load Pressure Loss 1207 kPa
Contour Length 4331 Contour Length 4267 Speed Range 160-320
Power Section ERT Spec (Metric Units) 475ERT45544.75" 4:5 Lobes 5.4 Stages
Rotor Specifications Stator Specifications Performance Specifications
lpm
Avg. Diameter 57.4 Tube OD 120.7 Rev per Unit Volume 0.28 Rev/liter
Overall Length 4483 Overall Length 5080 Flow Range 568-1136
0
0.1
0.2
0.3
0.4
0.5
0.6
0 20 40 60 80 100 120 140
Fit
In
cre
ase (
mm
)
Change in Temperature (C)
Fit Increase
568 lpm
852 lpm
1136 lpm
0
50
100
150
200
250
300
350
0 2,000 4,000 6,000 8,000 10,000 12,000
Sp
eed
(rp
m)
Speed
Differential Pressure (kPa)
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
0 2,000 4,000 6,000 8,000 10,000 12,000
To
rqu
e (
Nm
)
Torque
Differential Pressure (kPa)
568 lpm
852 lpm
1136 lpm
0
20
40
60
80
100
120
140
160
180
200
0 2,000 4,000 6,000 8,000 10,000 12,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
475ERT4554 4.75” 4:5 Lobes 5.4 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 258
mm mm
mm mm
mm mm
mm mm
mm
mm mm
mm mm
kg kg
Alt. Rotor Diameter (mm) 64.3
Reline Lengths (mm) Max 4623 Min 4470
Alt. Stator OD (mm) 127.0
2-OS
OS
STD 64.26 0.18 64.34 0.10
US
2-US
Size Minor Fit Minor Fit Minor Fit
UF114 POB 280XT
Stator Minors and Fit (mm) at 21oC
Thread Form 2 3/8" PAC Material Alloy Steel Stall Torque 10,64314,479 kPa 16,547 kPa
NmWeight 86.6 Weight 171.9 Stall Pressure
Nm 13,965 Nm
Head Length 152.4 Side 2: 609.6 Torque at Max Rec Pressure 3,781 Nm 4,399 Head Diameter 80.0 Side 1: 203.2 Max Recommended Pressure 3,447 kPa 3,930 Major Diameter 73.6 Rubber Cut-back UF114 POB-280XT
kPa
RPM
Eccentricity 4.6 Tube ID 95.25 No Load Pressure Loss 1310 kPa
Contour Length 3861 Contour Length 3810 Speed Range 55-145
Power Section ERT Spec (Metric Units) 475ERT67254.75" 6:7 Lobes 2.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
lpm
Avg. Diameter 64.4 Tube OD 120.7 Rev per Unit Volume 0.12 Rev/liter
Overall Length 4013 Overall Length 4623 Flow Range 473-1230
0
0.1
0.2
0.3
0.4
0.5
0.6
0 20 40 60 80 100 120 140
Fit
In
cre
ase (
mm
)
Change in Temperature (C)
Fit Increase
473 lpm
852 lpm
1230 lpm
0
20
40
60
80
100
120
140
160
0 1,000 2,000 3,000 4,000 5,000 6,000
Sp
eed
(rp
m)
Speed
Differential Pressure (kPa)
0
1,000
2,000
3,000
4,000
5,000
6,000
0 1,000 2,000 3,000 4,000 5,000 6,000
To
rqu
e (
Nm
)
Torque
Differential Pressure (kPa)
473 lpm
852 lpm
1230 lpm
0
10
20
30
40
50
60
70
80
90
0 1,000 2,000 3,000 4,000 5,000 6,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
475ERT6725 4.75” 6:7 Lobes 2.5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 259
mm mm
mm mm
mm mm
mm mm
mm
mm mm
mm mm
kg kg
Alt. Rotor Diameter (mm) 66.2 66.0
Reline Lengths (mm) Max 4750 Min 4597
Alt. Stator OD (mm) 127.0
2-OS
OS 66.93 -0.41 66.95 -0.43
STD 66.47 0.05 66.50 0.03
US
2-US
Size Minor Fit Minor Fit Minor Fit
UF114 POB 280XT
Stator Minors and Fit (mm) at 21oC
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 12,71820,822 kPa 24,132 kPa
NmWeight 176.0 Weight 175.5 Stall Pressure
Nm 16,595 Nm
Head Length 152.4 Side 2: 203.2 Torque at Max Rec Pressure 4,566 Nm 5,309 Head Diameter 69.9 Side 1: 203.2 Max Recommended Pressure 5,240 kPa 5,974 Major Diameter 74.8 Rubber Cut-back UF114 POB-280XT
kPa
RPM
Eccentricity 4.1 Tube ID 95.25 No Load Pressure Loss 1000 kPa
Contour Length 4369 Contour Length 4166 Speed Range 87-174
Power Section ERT Spec (Metric Units) 475ERTcr78384.75" 7:8 Lobes 3.8 Stages
Rotor Specifications Stator Specifications Performance Specifications
lpm
Avg. Diameter 66.5 Tube OD 120.7 Rev per Unit Volume 0.15 Rev/liter
Overall Length 4521 Overall Length 4750 Flow Range 568-1136
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0 20 40 60 80 100 120 140
Fit
In
cre
ase (
mm
)
Change in Temperature (C)
Fit Increase
568 lpm
852 lpm
1136 lpm
0
20
40
60
80
100
120
140
160
180
200
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000
Sp
eed
(rp
m)
Speed
Differential Pressure (kPa)
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000
To
rqu
e (
Nm
)
Torque
Differential Pressure (kPa)
568 lpm
852 lpm
1136 lpm
0
20
40
60
80
100
120
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
475ERT7838 4.75” 7:8 Lobes 3.8 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 260
mm mm
mm mm
mm mm
mm mm
mm
mm mm
mm mm
kg kg
Alt. Rotor Diameter (mm)
Reline Lengths (mm) Max 6248 Min 6096
Alt. Stator OD (mm)
2-OS 67.69 -0.79 67.82 -0.91
OS 67.44 -0.53 67.56 -0.66
STD 67.16 -0.25 67.28 -0.38
US
2-US
Size Minor Fit Minor Fit Minor Fit
UF114 POB 280XT
Stator Minors and Fit (mm) at 21oC
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 18,69739,645 kPa 45,781 kPa
NmWeight 165.6 Weight 247.7 Stall Pressure
Nm 23,347 Nm
Head Length 172.7 Side 2: 279.4 Torque at Max Rec Pressure 6,676 Nm 7,746 Head Diameter 72.4 Side 1: 190.5 Max Recommended Pressure 11,032 kPa 12,576 Major Diameter 76.7 Rubber Cut-back UF114 POB-280XT
kPa
RPM
Eccentricity 4.9 Tube ID 101.60 No Load Pressure Loss 931 kPa
Contour Length 5758 Contour Length 5779 Speed Range 120-280
Power Section ERT Spec (Metric Units) 500ERTcr67805" 6:7 Lobes 8 Stages
Rotor Specifications Stator Specifications Performance Specifications
lpm
Avg. Diameter 66.9 Tube OD 127.0 Rev per Unit Volume 0.21 Rev/liter
Overall Length 5931 Overall Length 6248 Flow Range 568-1325
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0 20 40 60 80 100 120 140
Fit
In
cre
ase (
mm
)
Change in Temperature (C)
Fit Increase
568 lpm
946 lpm
1325 lpm
0
50
100
150
200
250
300
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000 18,000
Sp
eed
(rp
m)
Speed
Differential Pressure (kPa)
0
2,000
4,000
6,000
8,000
10,000
12,000
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000 18,000
To
rqu
e (
Nm
)
Torque
Differential Pressure (kPa)
568 lpm
946 lpm
1325 lpm
0
50
100
150
200
250
300
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000 18,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
500ERTcr6780 5” 6:7 Lobes 8 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 261
mm mm
mm mm
mm mm
mm mm
mm
mm mm
mm mm
kg kg
Alt. Rotor Diameter (mm)
Reline Lengths (mm) Max 4928 Min 4775
Alt. Stator OD (mm)
2-OS
OS
STD 68.45 0.10 68.45 0.10
US
2-US
Size Minor Fit Minor Fit Minor Fit
UF114 POB 280XT
Stator Minors and Fit (mm) at 21oC
Thread Form 2 3/8" HEF Material Alloy Steel Stall Torque 15,23927,579 kPa 33,440 kPa
NmWeight 141.5 Weight 158.8 Stall Pressure
Nm 19,876 Nm
Head Length 152.4 Side 2: 381.0 Torque at Max Rec Pressure 5,268 Nm 6,123 Head Diameter 69.9 Side 1: 381.0 Max Recommended Pressure 6,895 kPa 7,860 Major Diameter 77.2 Rubber Cut-back UF114 POB-280XT
kPa
RPM
Eccentricity 4.3 Tube ID 99.06 No Load Pressure Loss 1069 kPa
Contour Length 4572 Contour Length 4166 Speed Range 93-186
Power Section ERT Spec (Metric Units) 500ERTcr78505" 7:8 Lobes 5 Stages
Rotor Specifications Stator Specifications Performance Specifications
lpm
Avg. Diameter 68.6 Tube OD 127.0 Rev per Unit Volume 0.16 Rev/liter
Overall Length 4724 Overall Length 4928 Flow Range 568-1136
0
0.1
0.2
0.3
0.4
0.5
0.6
0 20 40 60 80 100 120 140
Fit
In
cre
ase (
mm
)
Change in Temperature (C)
Fit Increase
568 lpm
852 lpm
1136 lpm
0
20
40
60
80
100
120
140
160
180
200
0 2,000 4,000 6,000 8,000 10,000 12,000
Sp
eed
(rp
m)
Speed
Differential Pressure (kPa)
0
1,000
2,000
3,000
4,000
5,000
6,000
7,000
8,000
9,000
0 2,000 4,000 6,000 8,000 10,000 12,000
To
rqu
e (
Nm
)
Torque
Differential Pressure (kPa)
568 lpm
852 lpm
1136 lpm
0
20
40
60
80
100
120
140
160
0 2,000 4,000 6,000 8,000 10,000 12,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
500ERTcr7850 5” 7:8 Lobes 5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 262
mm mm
mm mm
mm mm
mm mm
mm
mm mm
mm mm
kg kg
Alt. Rotor Diameter (mm)
Reline Lengths (mm) Max 5004 Min 4851
Alt. Stator OD (mm)
2-OS
OS
STD 82.60 0.33 82.68 0.25
US
2-US
Size Minor Fit Minor Fit Minor Fit
UF114 POB 280XT
Stator Minors and Fit (mm) at 21oC
Thread Form 3 1/2" API Reg Material Alloy Steel Stall Torque 15,79512,411 kPa 15,341 kPa
NmWeight 185.1 Weight 410.5 Stall Pressure
Nm 22,981 Nm
Head Length 203.2 Side 2: 635.0 Torque at Max Rec Pressure 7,395 Nm 8,700 Head Diameter 114.3 Side 1: 266.7 Max Recommended Pressure 3,034 kPa 3,458 Major Diameter 95.6 Rubber Cut-back UF114 POB-280XT
kPa
RPM
Eccentricity 6.4 Tube ID 127.00 No Load Pressure Loss 965 kPa
Contour Length 4178 Contour Length 4102 Speed Range 55-110
Power Section ERT Spec (Metric Units) 650ERT67226.5" 6:7 Lobes 2.2 Stages
Rotor Specifications Stator Specifications Performance Specifications
lpm
Avg. Diameter 82.9 Tube OD 165.1 Rev per Unit Volume 0.06 Rev/liter
Overall Length 4382 Overall Length 5004 Flow Range 946-1893
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
0 20 40 60 80 100 120 140
Fit
In
cre
ase (
mm
)
Change in Temperature (C)
Fit Increase
946 lpm
1420 lpm
1893 lpm
0
20
40
60
80
100
120
0 1,000 2,000 3,000 4,000 5,000
Sp
eed
(rp
m)
Speed
Differential Pressure (kPa)
0
2,000
4,000
6,000
8,000
10,000
12,000
0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000
To
rqu
e (
Nm
)
Torque
Differential Pressure (kPa)
946 lpm
1420 lpm
1893 lpm
0
20
40
60
80
100
120
140
0 1,000 2,000 3,000 4,000 5,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
650ERT6722 6.5” 6:7 Lobes 2.2 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 263
mm mm
mm mm
mm mm
mm mm
mm
mm mm
mm mm
kg kg
Alt. Rotor Diameter (mm)
Reline Lengths (mm) Max 5842 Min 5690
Alt. Stator OD (mm) 177.8
2-OS
OS 82.93 0.00 83.06 -0.13
STD 82.55 0.38 82.68 0.25
US
2-US
Size Minor Fit Minor Fit Minor Fit
UF114 POB 280XT
Stator Minors and Fit (mm) at 21oC
Thread Form 3 1/2" API Reg Material Alloy Steel Stall Torque 19,22514,651 kPa 18,616 kPa
NmWeight 226.3 Weight 487.6 Stall Pressure
Nm 28,201 Nm
Head Length 203.2 Side 2: 635.0 Torque at Max Rec Pressure 9,323 Nm 10,982 Head Diameter 120.7 Side 1: 266.7 Max Recommended Pressure 3,723 kPa 4,244 Major Diameter 95.6 Rubber Cut-back UF114 POB-280XT
kPa
RPM
Eccentricity 6.4 Tube ID 127.00 No Load Pressure Loss 1034 kPa
Contour Length 5017 Contour Length 4940 Speed Range 55-112
Power Section ERT Spec (Metric Units) 650ERT67276.5" 6:7 Lobes 2.7 Stages
Rotor Specifications Stator Specifications Performance Specifications
lpm
Avg. Diameter 82.9 Tube OD 165.1 Rev per Unit Volume 0.06 Rev/liter
Overall Length 5220 Overall Length 5842 Flow Range 946-1893
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
0 20 40 60 80 100 120 140
Fit
In
cre
ase (
mm
)
Change in Temperature (C)
Fit Increase
946 lpm
1420 lpm
1893 lpm
0
20
40
60
80
100
120
0 1,000 2,000 3,000 4,000 5,000 6,000
Sp
eed
(rp
m)
Speed
Differential Pressure (kPa)
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
0 1,000 2,000 3,000 4,000 5,000 6,000
To
rqu
e (
Nm
)
Torque
Differential Pressure (kPa)
946 lpm
1420 lpm
1893 lpm
0
20
40
60
80
100
120
140
160
0 1,000 2,000 3,000 4,000 5,000 6,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
650ERT6727 6.5” 6:7 Lobes 2.7 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 264
mm mm
mm mm
mm mm
mm mm
mm
mm mm
mm mm
kg kg
Alt. Rotor Diameter (mm) 93.0 92.4
Reline Lengths (mm) Max 5131 Min 4978
Alt. Stator OD (mm) 177.8
2-OS
OS
STD 93.22 0.08 93.35 -0.05
US
2-US
Size Minor Fit Minor Fit Minor Fit
UF114 POB 280XT
Stator Minors and Fit (mm) at 21oC
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 23,27915,513 kPa 18,271 kPa
NmWeight 246.8 Weight 347.5 Stall Pressure
Nm 30,208 Nm
Head Length 203.2 Side 2: 635.0 Torque at Max Rec Pressure 9,068 Nm 10,587 Head Diameter 104.8 Side 1: 266.7 Max Recommended Pressure 3,999 kPa 4,559 Major Diameter 107.1 Rubber Cut-back UF114 POB-280XT
kPa
RPM
Eccentricity 6.9 Tube ID 139.70 No Load Pressure Loss 1448 kPa
Contour Length 4293 Contour Length 4229 Speed Range 66-143
Power Section ERT Spec (Metric Units) 675ERT67296.75" 6:7 Lobes 2.9 Stages
Rotor Specifications Stator Specifications Performance Specifications
lpm
Avg. Diameter 93.3 Tube OD 171.5 Rev per Unit Volume 0.06 Rev/liter
Overall Length 4496 Overall Length 5131 Flow Range 1136-2461
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
0 20 40 60 80 100 120 140
Fit
In
cre
ase (
mm
)
Change in Temperature (C)
Fit Increase
1136 lpm
1798 lpm
2461 lpm
0
20
40
60
80
100
120
140
160
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Sp
eed
(rp
m)
Speed
Differential Pressure (kPa)
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
To
rqu
e (
Nm
)
Torque
Differential Pressure (kPa)
1136 lpm
1798 lpm
2461 lpm
0
20
40
60
80
100
120
140
160
180
200
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
675ERT6729 6.75” 6:7 Lobes 2.9 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 265
mm mm
mm mm
mm mm
mm mm
mm
mm mm
mm mm
kg kg
Alt. Rotor Diameter (mm) 92.2
Reline Lengths (mm) Max 3245 Min 3092
Alt. Stator OD (mm)
2-OS
OS
STD 92.25 0.41 92.43 0.23
US
2-US
Size Minor Fit Minor Fit Minor Fit
UF114 POB 280XT
Stator Minors and Fit (mm) at 21oC
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 16,74415,513 kPa 18,616 kPa
NmWeight 157.4 Weight 264.9 Stall Pressure
Nm 21,991 Nm
Head Length 165.1 Side 2: 184.2 Torque at Max Rec Pressure 6,545 Nm 7,634 Head Diameter 101.6 Side 1: 266.7 Max Recommended Pressure 4,275 kPa 4,873 Major Diameter 106.8 Rubber Cut-back UF114 POB-280XT
kPa
RPM
Eccentricity 7.1 Tube ID 139.70 No Load Pressure Loss 862 kPa
Contour Length 2794 Contour Length 2794 Speed Range 110-240
Power Section ERT Spec (Metric Units) 675ERT67316.75" 6:7 Lobes 3.1 Stages
Rotor Specifications Stator Specifications Performance Specifications
lpm
Avg. Diameter 92.7 Tube OD 171.5 Rev per Unit Volume 0.10 Rev/liter
Overall Length 2959 Overall Length 3245 Flow Range 1136-2461
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
0 20 40 60 80 100 120 140
Fit
In
cre
ase (
mm
)
Change in Temperature (C)
Fit Increase
1136 lpm
1798 lpm
2461 lpm
0
50
100
150
200
250
300
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Sp
eed
(rp
m)
Speed
Differential Pressure (kPa)
0
2,000
4,000
6,000
8,000
10,000
12,000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
To
rqu
e (
Nm
)
Torque
Differential Pressure (kPa)
1136 lpm
1798 lpm
2461 lpm
0
50
100
150
200
250
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
675ERT6731 6.75” 6:7 Lobes 3.1 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 266
mm mm
mm mm
mm mm
mm mm
mm
mm mm
mm mm
kg kg
Alt. Rotor Diameter (mm) 92.3 92.2
Reline Lengths (mm) Max 5131 Min 4978
Alt. Stator OD (mm)
2-OS
OS 92.63 0.03 92.68 -0.03
STD 92.25 0.41 92.43 0.23
US
2-US
Size Minor Fit Minor Fit Minor Fit
UF114 POB 280XT
Stator Minors and Fit (mm) at 21oC
Thread Form 3 1/2" API Reg Material Alloy Steel Stall Torque 26,16723,787 kPa 28,337 kPa
NmWeight 240.4 Weight 401.4 Stall Pressure
Nm 32,987 Nm
Head Length 203.2 Side 2: 635.0 Torque at Max Rec Pressure 8,937 Nm 10,337 Head Diameter 120.7 Side 1: 266.7 Max Recommended Pressure 6,619 kPa 7,546 Major Diameter 106.8 Rubber Cut-back UF114 POB-280XT
kPa
RPM
Eccentricity 7.1 Tube ID 139.70 No Load Pressure Loss 931 kPa
Contour Length 4293 Contour Length 4229 Speed Range 110-240
Power Section ERT Spec (Metric Units) 675ERT67486.75" 6:7 Lobes 4.8 Stages
Rotor Specifications Stator Specifications Performance Specifications
lpm
Avg. Diameter 92.7 Tube OD 171.5 Rev per Unit Volume 0.10 Rev/liter
Overall Length 4496 Overall Length 5131 Flow Range 1136-2461
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
0 20 40 60 80 100 120 140
Fit
In
cre
ase (
mm
)
Change in Temperature (C)
Fit Increase
1136 lpm
1798 lpm
2461 lpm
0
50
100
150
200
250
300
0 2,000 4,000 6,000 8,000 10,000 12,000
Sp
eed
(rp
m)
Speed
Differential Pressure (kPa)
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
0 2,000 4,000 6,000 8,000 10,000 12,000
To
rqu
e (
Nm
)
Torque
Differential Pressure (kPa)
1136 lpm
1798 lpm
2461 lpm
0
50
100
150
200
250
300
350
0 2,000 4,000 6,000 8,000 10,000 12,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
675ERT6748 6.75” 6:7 Lobes 4.8 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 267
mm mm
mm mm
mm mm
mm mm
mm
mm mm
mm mm
kg kg
Alt. Rotor Diameter (mm)
Reline Lengths (mm) Max 5334 Min 5182
Alt. Stator OD (mm)
2-OS
OS 89.28 -0.13 89.41 -0.25
STD 89.18 -0.03 89.28 -0.13
US
2-US
Size Minor Fit Minor Fit Minor Fit
UF114 POB 280XT
Stator Minors and Fit (mm) at 21oC
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 19,98525,166 kPa 26,545 kPa
NmWeight 262.6 Weight 280.3 Stall Pressure
Nm 25,218 Nm
Head Length 177.8 Side 2: 190.5 Torque at Max Rec Pressure 10,177 Nm 11,866 Head Diameter 101.6 Side 1: 190.5 Max Recommended Pressure 9,653 kPa 11,004 Major Diameter 107.2 Rubber Cut-back UF114 POB-280XT
kPa
RPM
Eccentricity 9.0 Tube ID 139.70 No Load Pressure Loss 1034 kPa
Contour Length 4966 Contour Length 4953 Speed Range 150-300
Power Section ERT Spec (Metric Units) 675ERTcr45706.75" 4:5 Lobes 7 Stages
Rotor Specifications Stator Specifications Performance Specifications
lpm
Avg. Diameter 89.2 Tube OD 171.5 Rev per Unit Volume 0.13 Rev/liter
Overall Length 5144 Overall Length 5334 Flow Range 1136-2271
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0 20 40 60 80 100 120 140
Fit
In
cre
ase (
mm
)
Change in Temperature (C)
Fit Increase
1136 lpm
1703 lpm
2271 lpm
0
50
100
150
200
250
300
350
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000
Sp
eed
(rp
m)
Speed
Differential Pressure (kPa)
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000
To
rqu
e (
Nm
)
Torque
Differential Pressure (kPa)
1136 lpm
1703 lpm
2271 lpm
0
50
100
150
200
250
300
350
400
450
0 2,000 4,000 6,000 8,000 10,000 12,000 14,000 16,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
675ERTcr4570 6.75” 4:5 Lobes 7 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 268
mm mm
mm mm
mm mm
mm mm
mm
mm mm
mm mm
kg kg
Alt. Rotor Diameter (mm)
Reline Lengths (mm) Max 5080 Min 4928
Alt. Stator OD (mm)
2-OS
OS 95.25 -0.25 95.38 -0.38
STD 95.00 0.00 95.20 -0.20
US
2-US
Size Minor Fit Minor Fit Minor Fit
UF114 POB 280XT
Stator Minors and Fit (mm) at 21oC
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 29,21819,889 kPa 22,753 kPa
NmWeight 273.1 Weight 337.9 Stall Pressure
Nm 36,892 Nm
Head Length 194.8 Side 2: 184.2 Torque at Max Rec Pressure 12,741 Nm 14,812 Head Diameter 101.6 Side 1: 184.2 Max Recommended Pressure 6,895 kPa 7,860 Major Diameter 109.6 Rubber Cut-back UF114 POB-280XT
kPa
RPM
Eccentricity 7.3 Tube ID 139.70 No Load Pressure Loss 931 kPa
Contour Length 4733 Contour Length 4712 Speed Range 84-168
Power Section ERT Spec (Metric Units) 675ERTcr67506.75" 6:7 Lobes 5 Stages
Rotor Specifications Stator Specifications Performance Specifications
lpm
Avg. Diameter 95.0 Tube OD 171.5 Rev per Unit Volume 0.07 Rev/liter
Overall Length 4928 Overall Length 5080 Flow Range 1136-2271
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0 20 40 60 80 100 120 140
Fit
In
cre
ase (
mm
)
Change in Temperature (C)
Fit Increase
1136 lpm
1703 lpm
2271 lpm
0
20
40
60
80
100
120
140
160
180
0 2,000 4,000 6,000 8,000 10,000 12,000
Sp
eed
(rp
m)
Speed
Differential Pressure (kPa)
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
16,000
18,000
20,000
0 2,000 4,000 6,000 8,000 10,000 12,000
To
rqu
e (
Nm
)
Torque
Differential Pressure (kPa)
1136 lpm
1703 lpm
2271 lpm
0
50
100
150
200
250
300
350
0 2,000 4,000 6,000 8,000 10,000 12,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
675ERTcr6750 6.75” 6:7 Lobes 5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 269
mm mm
mm mm
mm mm
mm mm
mm
mm mm
mm mm
kg kg
Alt. Rotor Diameter (mm)
Reline Lengths (mm) Max 3175 Min 3023
Alt. Stator OD (mm)
2-OS
OS
STD 102.06 -0.25 102.11 -0.30
US
2-US
Size Minor Fit Minor Fit Minor Fit
UF114 POB 280XT
Stator Minors and Fit (mm) at 21oC
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 20,26914,585 kPa 16,892 kPa
NmWeight 196.4 Weight 211.4 Stall Pressure
Nm 26,615 Nm
Head Length 181.9 Side 2: 184.2 Torque at Max Rec Pressure 7,685 Nm 8,924 Head Diameter 101.6 Side 1: 184.2 Max Recommended Pressure 4,137 kPa 4,716 Major Diameter 114.8 Rubber Cut-back UF114 POB-280XT
kPa
RPM
Eccentricity 6.5 Tube ID 139.70 No Load Pressure Loss 862 kPa
Contour Length 2828 Contour Length 2807 Speed Range 84-168
Power Section ERT Spec (Metric Units) 675ERTcr78306.75" 7:8 Lobes 3 Stages
Rotor Specifications Stator Specifications Performance Specifications
lpm
Avg. Diameter 101.8 Tube OD 171.5 Rev per Unit Volume 0.07 Rev/liter
Overall Length 3010 Overall Length 3175 Flow Range 1136-2271
0
0.1
0.2
0.3
0.4
0.5
0.6
0 20 40 60 80 100 120 140
Fit
In
cre
ase (
mm
)
Change in Temperature (C)
Fit Increase
1136 lpm
1703 lpm
2271 lpm
0
20
40
60
80
100
120
140
160
180
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Sp
eed
(rp
m)
Speed
Differential Pressure (kPa)
0
2,000
4,000
6,000
8,000
10,000
12,000
14,000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
To
rqu
e (
Nm
)
Torque
Differential Pressure (kPa)
1136 lpm
1703 lpm
2271 lpm
0
20
40
60
80
100
120
140
160
180
200
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
675ERTcr6730 6.75” 7:8 Lobes 3 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 270
mm mm
mm mm
mm mm
mm mm
mm
mm mm
mm mm
kg kg
Alt. Rotor Diameter (mm)
Reline Lengths (mm) Max 4940 Min 4788
Alt. Stator OD (mm)
2-OS
OS 102.06 -0.25 102.08 -0.28
0.5-OS 101.85 -0.05 101.88 -0.08
STD 101.65 0.15 101.68 0.13
US
Size Minor Fit Minor Fit Minor Fit
UF114 POB 280XT
Stator Minors and Fit (mm) at 21oC
Thread Form 2 7/8" API Reg Material Alloy Steel Stall Torque 33,27221,374 kPa 25,855 kPa
NmWeight 318.9 Weight 328.9 Stall Pressure
Nm 41,068 Nm
Head Length 188.0 Side 2: 184.2 Torque at Max Rec Pressure 12,875 Nm 14,933 Head Diameter 101.6 Side 1: 184.2 Max Recommended Pressure 6,895 kPa 7,860 Major Diameter 114.8 Rubber Cut-back UF114 POB-280XT
kPa
RPM
Eccentricity 6.5 Tube ID 139.70 No Load Pressure Loss 1103 kPa
Contour Length 4562 Contour Length 4572 Speed Range 84-168
Power Section ERT Spec (Metric Units) 675ERTcr78506.75" 7:8 Lobes 5 Stages
Rotor Specifications Stator Specifications Performance Specifications
lpm
Avg. Diameter 101.8 Tube OD 171.5 Rev per Unit Volume 0.07 Rev/liter
Overall Length 4750 Overall Length 4940 Flow Range 1136-2271
0
0.1
0.2
0.3
0.4
0.5
0.6
0 20 40 60 80 100 120 140
Fit
In
cre
ase (
mm
)
Change in Temperature (C)
Fit Increase
1136 lpm
1703 lpm
2271 lpm
0
20
40
60
80
100
120
140
160
180
0 2,000 4,000 6,000 8,000 10,000 12,000
Sp
eed
(rp
m)
Speed
Differential Pressure (kPa)
0
5,000
10,000
15,000
20,000
25,000
0 2,000 4,000 6,000 8,000 10,000 12,000
To
rqu
e (
Nm
)
Torque
Differential Pressure (kPa)
1136 lpm
1703 lpm
2271 lpm
0
50
100
150
200
250
300
350
0 2,000 4,000 6,000 8,000 10,000 12,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
675ERTcr7850 6.75” 7:8 Lobes 5 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 271
mm mm
mm mm
mm mm
mm mm
mm
mm mm
mm mm
kg kg
Alt. Rotor Diameter (mm)
Reline Lengths (mm) Max 6096 Min 5944
Alt. Stator OD (mm)
2-OS
OS
STD 100.56 0.41 100.84 0.13
US
2-US
Size Minor Fit Minor Fit Minor Fit
UF114 POB 280XT
Stator Minors and Fit (mm) at 21oC
Thread Form 3 1/2" IF or Reg Material Alloy Steel Stall Torque 36,74320,684 kPa 23,787 kPa
NmWeight 367.4 Weight 771.1 Stall Pressure
Nm 46,335 Nm
Head Length 177.8 Side 2: 254.0 Torque at Max Rec Pressure 15,880 Nm 18,451 Head Diameter 120.7 Side 1: 254.0 Max Recommended Pressure 7,171 kPa 8,174 Major Diameter 119.3 Rubber Cut-back UF114 POB-280XT
kPa
RPM
Eccentricity 9.1 Tube ID 158.75 No Load Pressure Loss 689 kPa
Contour Length 5613 Contour Length 5588 Speed Range 71-215
Power Section ERT Spec (Metric Units) 800ERT56528" 5:6 Lobes 5.2 Stages
Rotor Specifications Stator Specifications Performance Specifications
lpm
Avg. Diameter 101.0 Tube OD 203.2 Rev per Unit Volume 0.06 Rev/liter
Overall Length 5791 Overall Length 6096 Flow Range 1136-3407
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
0 20 40 60 80 100 120 140
Fit
In
cre
ase (
mm
)
Change in Temperature (C)
Fit Increase
1136 lpm
2271 lpm
3407 lpm
0
50
100
150
200
250
0 2,000 4,000 6,000 8,000 10,000 12,000
Sp
eed
(rp
m)
Speed
Differential Pressure (kPa)
0
5,000
10,000
15,000
20,000
25,000
30,000
0 2,000 4,000 6,000 8,000 10,000 12,000
To
rqu
e (
Nm
)
Torque
Differential Pressure (kPa)
1136 lpm
2271 lpm
3407 lpm
0
100
200
300
400
500
600
0 2,000 4,000 6,000 8,000 10,000 12,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
800ERT5652 8” 5:6 Lobes 5.2 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 272
mm mm
mm mm
mm mm
mm mm
mm
mm mm
mm mm
kg kg
Alt. Rotor Diameter (mm)
Reline Lengths (mm) Max 5391 Min 5239
Alt. Stator OD (mm)
2-OS
OS
STD 116.59 0.25 116.76 0.08
US
2-US
Size Minor Fit Minor Fit Minor Fit
UF114 POB 280XT
Stator Minors and Fit (mm) at 21oC
Thread Form 3 1/2" API IF Material Alloy Steel Stall Torque 48,45718,512 kPa 22,063 kPa
NmWeight 430.9 Weight 610.5 Stall Pressure
Nm 58,300 Nm
Head Length 203.2 Side 2: 330.2 Torque at Max Rec Pressure 17,811 Nm 20,632 Head Diameter 120.7 Side 1: 330.2 Max Recommended Pressure 5,516 kPa 6,288 Major Diameter 131.7 Rubber Cut-back UF114 POB-280XT
kPa
RPM
Eccentricity 7.4 Tube ID 163.58 No Load Pressure Loss 1103 kPa
Contour Length 4780 Contour Length 4757 Speed Range 49-146
Power Section ERT Spec (Metric Units) 825ERTcr78408.25" 7:8 Lobes 4 Stages
Rotor Specifications Stator Specifications Performance Specifications
lpm
Avg. Diameter 116.8 Tube OD 209.6 Rev per Unit Volume 0.04 Rev/liter
Overall Length 4983 Overall Length 5391 Flow Range 1136-3407
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0 20 40 60 80 100 120 140
Fit
In
cre
ase (
mm
)
Change in Temperature (C)
Fit Increase
1136 lpm
2271 lpm
3407 lpm
0
20
40
60
80
100
120
140
160
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000
Sp
eed
(rp
m)
Speed
Differential Pressure (kPa)
0
5,000
10,000
15,000
20,000
25,000
30,000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000
To
rqu
e (
Nm
)
Torque
Differential Pressure (kPa)
1136 lpm
2271 lpm
3407 lpm
0
50
100
150
200
250
300
350
400
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000 9,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
825ERTcr7840 8.25” 7:8 Lobes 4 Stages
©2015 NOV. All rights reserved. Except as noted, all trademarks referenced in this document are trademarks of NOV.Performance curves describe theoretical performance with 175°F (79°C) water and are for reference only. Operational fit and drilling conditions will affect performance. Operation above maximum recommended limits will reduce life. Specification data are subject to change without notice.
Drilling and InterventionPAGE NO: 273
mm mm
mm mm
mm mm
mm mm
mm
mm mm
mm mm
kg kg
Alt. Rotor Diameter (mm) 136.1 135.6
Reline Lengths (mm) Max 5334 Min 5182
Alt. Stator OD (mm) 285.8
2-OS
OS 136.37 0.08 136.55 -0.10
STD 135.94 0.51 136.12 0.33
US
2-US
Size Minor Fit Minor Fit Minor Fit
UF114 POB 280XT
Stator Minors and Fit (mm) at 21oC
Thread Form 4" API FH Material Alloy Steel Stall Torque 69,72316,547 kPa 18,961 kPa
NmWeight 544.3 Weight 884.5 Stall Pressure
Nm 88,230 Nm
Head Length 203.2 Side 2: 355.6 Torque at Max Rec Pressure 25,186 Nm 29,087 Head Diameter 149.9 Side 1: 355.6 Max Recommended Pressure 4,826 kPa 5,502 Major Diameter 157.4 Rubber Cut-back UF114 POB-280XT
kPa
RPM
Eccentricity 10.5 Tube ID 199.39 No Load Pressure Loss 689 kPa
Contour Length 4813 Contour Length 4648 Speed Range 65-125
Power Section ERT Spec (Metric Units) 962ERT67359.625" 6:7 Lobes 3.5 Stages
Rotor Specifications Stator Specifications Performance Specifications
lpm
Avg. Diameter 136.4 Tube OD 244.5 Rev per Unit Volume 0.03 Rev/liter
Overall Length 5017 Overall Length 5334 Flow Range 2271-4542
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
0 20 40 60 80 100 120 140
Fit
In
cre
ase (
mm
)
Change in Temperature (C)
Fit Increase
2271 lpm
3407 lpm
4542 lpm
0
20
40
60
80
100
120
140
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
Sp
eed
(rp
m)
Speed
Differential Pressure (kPa)
0
5,000
10,000
15,000
20,000
25,000
30,000
35,000
40,000
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
To
rqu
e (
Nm
)
Torque
Differential Pressure (kPa)
2271 lpm
3407 lpm
4542 lpm
0
50
100
150
200
250
300
350
400
450
0 1,000 2,000 3,000 4,000 5,000 6,000 7,000 8,000
Mech
an
ical P
ow
er
(Kw
)
Mechanical Power
Differential Pressure (kPa)
Max DP for reliable operation will vary based on operational conditions. Refer to ERT Operational Guidelines for guidance.
962ERT6735 9.625” 6:7 Lobes 3.5 Stages
Drilling and Intervention
NOV Wellbore Technologies - Drilling and Intervention 7909 Parkwood Circle Drive
Houston, Texas 77036 Phone: 713 375 3700
Fax: 713 346 7687
Richmond: 832-714-3800 Dubai:01197148110100
24 Hour Technical Help line713-346-7000
WorldWideor
1-888-DHT-TOOL(888-348-8665)
Toll Free US & Canada
ThisdocumentcontainsinformationwhichisvaluableandproprietarytoWellboreTechnologies-DrillingandIntervention. ThecopyrightforthisdocumentisownedbyWellboreTechnologies-DrillingandIntervention.Nopartofthisdocumentistobecopied,
reproduced,ordistributedwithoutthewrittenapprovalofNOVWellboreTechnologies-DrillingandIntervention.
© 2015 National Oilwell Varco All Rights Reserved 10113485-401-ENG-MKT:41