3332 e automation technology with siemens plc
TRANSCRIPT
-
8/21/2019 3332 E Automation Technology With Siemens PLC
1/122
Automation TechnologyAcquire practical and project-oriented laboratory skil ls and expertise:
Automation trainers, mechatronics t rainers, PLC trainers
Automation technology
Automation technology
Due to the growing importance of process automation the area of automation technology is taking on an evergreater role in industrial operations. This applies both for standard operations in production as well as forvocational training. Today automation technology almost always involves drive technology, closed-loop controland computer engineering. Due to the rapid developments in microcontroller and computer technology,automation has become one of the most innovative and breathtaking of all the areas of electrical engineeringand electronics. Add to that the fact that novel industrial solutions like decentralisation and visualisation requirenew vocational training systems. Furthermore, the hitherto sheer multitude of manufacturer-dependent softwareproducts has been replaced by the international standard IEC1131-3. Contemporary programmable logic controlswill now be programmed in accordance with standardised rules. All of these demands mean that there is a needto have the automation technician of today trained on practice-oriented training systems which convey to thestudent both the latest technology but also endow him or her with the required skills and competency.
Lucas Nlle GmbH Page 1/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
2/122
Automation technology with Siemens PLC
Automation technology with Siemens PLC
Lucas Nlle GmbH Page 2/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
3/122
CLC 30 Fundamentals of programmable logic controls using theSIMATIC S7-300
CLC 30 Fundamentals of programmable logic controls using the SIMATIC S7-300
Work with STEP 7 programming software
Hardware configuration and planning
Data types
Creating statement lists
Programming languages STL, LAD and SFC
Programming of binary operations and word operations
Programming of counters and time markers, comparison and arithmetic functions
Program structure, invoking subroutings
Putting into operation and testing
Diagnostic functions
Lucas Nlle GmbH Page 3/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
4/122
Pos. Product name Bestell-Nr. Anz.
1 SIMATIC S7-314C-2 PN/DP 24 DI, 16 DO, 4 AI, 2 AO, 24V / 6 A powersupply
CO3713-8L 1
Modular training system for PLC devices of the SIMATIC S7-300series . The freely access ible profile rail can be equipped with variousinput and output modules of the SIMATIC S7-300 series . The systembus in tegrated in the training system a llows s traightforwardconnection of the modules.
SIMATIC S7-300 with CPU 314C-2 PN/DP
Stable desktop console with non-slip feet
Integrated power s upply: 24V/6A DC
Sockets for EMERGENCY-OFF loop (voltage isolation ofoutput components)
Main memory: 96KByte
Loading m emory: micro memory card 512KByte
Programming language: STEP 7
Processing times: 0.1s for bit operation, 0.5s for wordoperation
256 counters
256 time markers
MPI / Integrated PROFIBUS-DP master/slave interface
2 Ethernet / ProfiNet interfaces
Integrated inputs/output
24 digital inputs DC 24V on 4mm safety sockets
24 latched, pushbutton switches for the sim ulation of digitalinputs
4 analog inputs 0-10V on 4mm s afety sockets
1 potentiometer to simulate analog inputs
16 digital outputs DC 24V on 4mm safety sockets
2 analog output 0-10V on 4mm s afety sockets
Real-time clock
Operating voltage: 230V AC
Dimens ions (HxWxD): 297 x 456 x 125mm
Weight: 7kg
Important note:
This item can only be ordered upon s ubmiss ion of a s upplementarylicence agreement covering schools and training centres (includingcommercial use).
Equipment set, consisting of:
Equipment set, consisting of:
Lucas Nlle GmbH Page 4/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
5/122
2 PLC-S7 PC-adapter with USB/MPI converter SO3713-5E 1
For coupl ing a PC to a SIMATIC S7-300 via USB port
Including MPI and USB cables
Pos. Product name Bestell-Nr. Anz.
3 Software for training systems 1x STEP 7, S7-Graph, S7-SCL, PLC-Sim(D,GB,F,E,I)
SO6002-1Q 1
The software consists of the following program elements:
1 x STEP 7 Professional V13 (TIA-Portal)
1 x STEP 7 Profess ional 2010 v5.5
For designing projects with SIMATIC S7-1500/1200/300/400/WINACand SIMATIC Basic panels.
1 x S7-SCL (Structured Control Language); pascal-typehigh-level language, optimised for the programming ofprogrammable logic controls
1 x S7-GRAPH; efficient tool for the description ofsequential processes (process chains) including amethodical procedure and display offering a clear overview.
1 x S7-PLCSIM; simulation software for testing userprograms created on a PC, independent of the availabilityof targeted hardware.
1 x S7 Distributed Safety v5.4
Warning:Suitable for schools and commercial training centres.
System prerequisites:
Personal computer with Windows Server 2003/Windows 7operating system (32 Bit Ultimate, Professional andEnterprise)
CD-ROM disk drive for software installation
USB port for programmer interface
Minimum 650 MB free hard disk memory
Minimum 1GB RAM main memory
Processor with minimum 600 MHz for Windows XP, 2.4GHz for Windows Server 2003 and 1 GHz for Windows 7
Software:
Lucas Nlle GmbH Page 5/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
6/122
Pos. Product name Bestell-Nr. Anz.
4 QuickChart, Siemens PLC S7 board, safety instructions (GB) SO6200-5A 1
Short documentation covering the putting into operation of complexequipment and experiment set-ups.
Terminal ass ignment, safety instructions, help
Circuit and assembly diagrams
Color print i n DIN A3 format
Laminated: 2 x 250 m
5 QuickChart, Siemens PLC S7 board, assembly and start-up (GB) SO6200-5B 1
Short documentation covering the putting into operation of complexequipment and experiment set-ups.
Terminal ass ignment, safety instructions, help
Circuit and assembly diagrams
Color print i n DIN A3 format
Laminated: 2 x 250 m
6 CLC30, PLC fundamentals, manuals on DVD (D,GB) SO5155-1M 1
Collection of manuals and programming examples for allautomation topics on DVD
7 CLC30, PLC fundamentals, SIMATIC documentation on DVD(D,GB,F,E)
SO5155-1N 1
Documentation package SIMATIC MANUAL COLLECTION on DVD, allmanuals for S7-200/300/400, C7, LOGO!, SIMATIC DP, PC, PG,STEP7, ENGINEERING SW, RUNTIME SW, PCS7, SIMATIC HMI,SIMATIC NET, SIMATIC MACHINE VISION, SIMATIC SENSORS
Media:
Lucas Nlle GmbH Page 6/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
7/122
Pos. Product name Bestell-Nr. Anz.
8 Mobile aluminium experiment stand, 3 levels, 6x earthed sockets,1250x700x1955mm
ST7200-3A 1
High-quality, mobile experiments stand from the SybaPro range fordemonstrations and experiments. Features aluminium profile legscompatible with all add-ons and extensions for the SybaPro system.The mobile experiment stand is s upplied in kit form and needs to beassembled by customers themselves.
Table top:
30-mm table top made of highly compressed, multi-layer finechipboard conforming to DIN EN 438-1
Colour grey, RAL 7035, with 0.8-mm slightly textured laminatecoating (Resopal) on both sides , conforming to DIN 16926
Resistant to many chemicals and reagents including diluteacids and alkalis
Resis tant to heat, e.g. molten solder or heating at specificpoints such as by soldering tips or cigarette ends
Table top with solid impact-resistant protective edging madeof 3mm thick RAL 7047 coloured plas tic
Coating and adhes ive are PVC free
Power supply with 6-outlet socket strip mounted underneaththe table top, 2-m lead and earthed plugs
Frame:
2 extruded aluminium profiles wi th multiple grooves 1800 x120 x 40 mm (WxHxD)
8 equally sized grooves in extruded aluminium profiles (3 on
each side and 1 each on the front and back)
Grooves accommodate standard industrial mountings
4 H-shaped aluminium profiles, 1150 mm, for 3-layerorganisa tion of DIN A4 panels
Space for extension of power s upply duct
Base made of rectangular tubing with 4 swivelling doublecasters, 2 of which have brakes
Table frame made of tough combination of rectangular tubingaround the full perimeter
Acid-resis tant epoxy-resin coating, 80 m thick (approx.),colour RAL 7047
Dimensions:
Height of table top 760 mm
1250 x 1955 x 700 mm (WxHxD)
Accessories:
Lucas Nlle GmbH Page 7/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
8/122
9 Protection cover for three-level experiment trolleys ST8010-9Y 1
Dust cover for three-level experiment trolleys
For protecting equipment from dust and damp
For keeping equipment out of sight
Colour: matt dark grey with printed LN logo in orange)
Material: nylon fabric with polyurethane coating
High resis tant to tearing, impregnated to be washable andwaterproof
CLC 12 Programmable logic controls using the SIMATIC S7-1200
CLC 12 Programmable logic controls using the SIMATIC S7-1200
Work with SIMATIC TIA Portal programming softwareHardware configuration and planningData typesCreating statement listsProgramming languages SCL, KOP and FUPProgramming of binary operations and word operationsProgramming of counters and time markers, comparison and arithmetic functionsProgram structure, invoking subroutingsPutting into operation and testingDiagnostic functions
Lucas Nlle GmbH Page 8/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
9/122
Pos. Product name Bestell-Nr. Anz.
10 SIMATIC S7-1200 14 DE, 10 DA, 2 AE, 1 AA, 24V / 5 A power supply CO3713-8Q 1
Modular training system for PLC devices in the SIMATIC S7-1200range. Profile rails are fully accessible and can accommodate aPROFIBUS or an AS-i master module.
KTP700 touch panel includes an Ethernet port for communicationand programming.
S7-1200 PLC:
SIMATIC S7-1200 with 1214C DC/DC/DC CPUTough console housing with non-slip feetIntegrated power supply: 24 V/5 A DC
Sockets for emergency shut-down loop (to cut off voltageto output terminals)Working memory: 50 kilobytesUpload memory: 2-MbyteProgramming language: STEP 7 as of version 10.5Processing times: 0.1 s for bit operations, 12 s for wordoperations, 18 s for floating point arithmeticTotal remanent data memory (including timers, countersand flags): 2048 bytes1 Ethernet/ProfiNet portIntegrated inputs and outputs14 Digital inputs, 24 V DC, via 4-mm safety sockets14 Latching push buttons for simulating digital inputs2 Analog inputs, 010 V, via 4-mm safety sockets1 Potentiometer for simulating analog input10 Digital outputs, 24 V DC, via 4-mm safety sockets
KTP700 touch panel:
Fully graphical colour display (65536 colours)MTBF backlighting7" touch screenResolution: 800 x 480 W x HPort: PROFINET
Operating voltage: 230 V ACDimensions (HxWxD): 297 x 456 x 125 mmWeight: 7 kg
Ethernet switch:
All equipment can be easily combined in a network via theintegrated four-way Ethernet switch.
Important note:
Items may only be ordered upon proof of a supplementarylicensing agreement for schools and t raining centres (includingcommercial training facilities).
Equipment set, consisting of:
Equipment set, consisting of:
Other modules available
Lucas Nlle GmbH Page 9/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
10/122
11 CM1243-5 communications module for connection of S7-1200 toPROFIBUS
CO3713-8N 1
The S7-1200 is equipped with a PROFINET port. A communicationsmodule is required in order to connect equipment to the S7-1200 viaPROFIBUS. Add the module to the PLC hardware configuration and
connect your equipment to it via the module. The module operates asa PROFIBUS master.
12 CM1243-2 communications module for connection of S7-1200 toAS-i bus
CO3713-8P 1
The S7-1200 is equipped with a PROFINET port. A communicationsmodule is required in order to connect existing equipm ent to the S7-1200 via AS-i. Add the module to the PLC hardware configuration andconnect your equipment to it via the module. The module operates as
an AS-i master.
Lucas Nlle GmbH Page 10/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
11/122
Pos. Product name Bestell-Nr. Anz.
13 Software for training systems 1x STEP 7, S7-Graph, S7-SCL, PLC-Sim(D,GB,F,E,I)
SO6002-1Q 1
The software consists of the following program elements:
1 x STEP 7 Professional V13 (TIA-Portal)
1 x STEP 7 Profess ional 2010 v5.5
For designing projects with SIMATIC S7-1500/1200/300/400/WINACand SIMATIC Basic panels.
1 x S7-SCL (Structured Control Language); pascal-typehigh-level language, optimised for the programming ofprogrammable logic controls
1 x S7-GRAPH; efficient tool for the description ofsequential processes (process chains) including amethodical procedure and display offering a clear overview.
1 x S7-PLCSIM; simulation software for testing userprograms created on a PC, independent of the availabilityof targeted hardware.
1 x S7 Distributed Safety v5.4
Warning:Suitable for schools and commercial training centres.
System prerequisites:
Personal computer with Windows Server 2003/Windows 7operating system (32 Bit Ultimate, Professional andEnterprise)
CD-ROM disk drive for software installation
USB port for programmer interface
Minimum 650 MB free hard disk memory
Minimum 1GB RAM main memory
Processor with minimum 600 MHz for Windows XP, 2.4GHz for Windows Server 2003 and 1 GHz for Windows 7
Software:
Lucas Nlle GmbH Page 11/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
12/122
Pos. Product name Bestell-Nr. Anz.
14 Mobile aluminium experiment stand, 3 levels, 6x earthed sockets,1250x700x1955mm
ST7200-3A 1
High-quality, mobile experiments stand from the SybaPro range fordemonstrations and experiments. Features aluminium profile legscompatible with all add-ons and extensions for the SybaPro system.The mobile experiment stand is s upplied in kit form and needs to beassembled by customers themselves.
Table top:
30-mm table top made of highly compressed, multi-layer finechipboard conforming to DIN EN 438-1
Colour grey, RAL 7035, with 0.8-mm slightly textured laminatecoating (Resopal) on both sides , conforming to DIN 16926
Resistant to many chemicals and reagents including diluteacids and alkalis
Resis tant to heat, e.g. molten solder or heating at specificpoints such as by soldering tips or cigarette ends
Table top with solid impact-resistant protective edging madeof 3mm thick RAL 7047 coloured plas tic
Coating and adhes ive are PVC free
Power supply with 6-outlet socket strip mounted underneaththe table top, 2-m lead and earthed plugs
Frame:
2 extruded aluminium profiles wi th multiple grooves 1800 x120 x 40 mm (WxHxD)
8 equally sized grooves in extruded aluminium profiles (3 on
each side and 1 each on the front and back)
Grooves accommodate standard industrial mountings
4 H-shaped aluminium profiles, 1150 mm, for 3-layerorganisa tion of DIN A4 panels
Space for extension of power s upply duct
Base made of rectangular tubing with 4 swivelling doublecasters, 2 of which have brakes
Table frame made of tough combination of rectangular tubingaround the full perimeter
Acid-resis tant epoxy-resin coating, 80 m thick (approx.),colour RAL 7047
Dimensions:
Height of table top 760 mm
1250 x 1955 x 700 mm (WxHxD)
Accessories:
Lucas Nlle GmbH Page 12/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
13/122
15 Protection cover for three-level experiment trolleys ST8010-9Y 1
Dust cover for three-level experiment trolleys
For protecting equipment from dust and damp
For keeping equipment out of sight
Colour: matt dark grey with printed LN logo in orange)
Material: nylon fabric with polyurethane coating
High resis tant to tearing, impregnated to be washable andwaterproof
CLC 15 Programmable logic control using the SIMATIC S7-1500
CLC 15 Programmable logic control using the SIMATIC S7-1500
Work with SIMATIC TIA Portal programming softwareHardware configuration and planningData typesCreating statement listsProgramming languages AWL, SCL, KOP and FUPProgramming of binary operations and word operationsProgramming of counters and time markers, comparison and arithmetic functionsProgram structure, invoking subroutingsPutting into operation and testingDiagnostic functions
Lucas Nlle GmbH Page 13/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
14/122
Pos. Product name Bestell-Nr. Anz.
16 SIMATIC S7-1516-3 PN/DP 32 DE, 32 DA, 8 AE, 4 AA, 24V / 6 A powersupply
CO3713-8R 1
Trainingssystem fr SPS Gerte der SIMATIC S7-1500 Serie. Diefrei zugngliche Profilschiene ist mit den Ein- undAusgabemodulen der SIMATIC S7-1500 Serie bestckt.
Stabiles Pultgehuse mit rutschfesten Fen
Frei zugngliche Profilschiene zum Aufbau der SPS
Integrierte Stromversorgung: 24 V/6 A DC
Betriebsspannung: 230 V AC
16 Digitaleingnge DC 24 V auf 4 mm Sicherheitsbuchsen
16 Taster/Rastschalter zur Simulation der Digitaleingnge
16 Digitalausgnge DC 24 V auf 4mm Sicherheitsbuchsen
16 Digitaleingnge DC 24 V ber 9-pol, 25-pol und 37-polSystemstecker
16 Digitalausgnge DC 24 V ber 9-pol, 25-pol und 37-polSystemstecker
8 Analogeingnge -10 V ... +10 V und 0 ... 20 mA
4 Analogaus gnge whlbar -10 V ... +10 V oder 0...20 mA
1 Analogaus gang m it -10 V ... +10 V ber Potentiometereinstellbar
1 Analogaus gang m it 0 ... 20 mA ber Potentiometereinstellbar
9-pol und 25-pol Buchsen zu direkten Ansteuerungmechatronischer Anlagen
37-pol Stecker und 37-pol Buchse
Abmessungen (HxBxT): (297 x 456 x 230) mm
Gewicht: 6,5 kg inkl. SPS
Wichtiger Hinweis:
Artikel kann nur nach Vorlage einer ergnzendenLizenzvereinbarung fr Schulen und Ausbildungssttten (auchgewerblicher Bereich) bestellt werden.
Equipment set, consisting of:
Equipment set, consisting of:
Lucas Nlle GmbH Page 14/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
15/122
Pos. Product name Bestell-Nr. Anz.
17 Software for training systems 1x STEP 7, S7-Graph, S7-SCL, PLC-Sim(D,GB,F,E,I)
SO6002-1Q 1
The software consists of the following program elements:
1 x STEP 7 Professional V13 (TIA-Portal)
1 x STEP 7 Profess ional 2010 v5.5
For designing projects with SIMATIC S7-1500/1200/300/400/WINACand SIMATIC Basic panels.
1 x S7-SCL (Structured Control Language); pascal-typehigh-level language, optimised for the programming ofprogrammable logic controls
1 x S7-GRAPH; efficient tool for the description ofsequential processes (process chains) including amethodical procedure and display offering a clear overview.
1 x S7-PLCSIM; simulation software for testing userprograms created on a PC, independent of the availabilityof targeted hardware.
1 x S7 Distributed Safety v5.4
Warning:Suitable for schools and commercial training centres.
System prerequisites:
Personal computer with Windows Server 2003/Windows 7operating system (32 Bit Ultimate, Professional andEnterprise)
CD-ROM disk drive for software installation
USB port for programmer interface
Minimum 650 MB free hard disk memory
Minimum 1GB RAM main memory
Processor with minimum 600 MHz for Windows XP, 2.4GHz for Windows Server 2003 and 1 GHz for Windows 7
Software:
Lucas Nlle GmbH Page 15/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
16/122
Pos. Product name Bestell-Nr. Anz.
18 Mobile aluminium experiment stand, 3 levels, 6x earthed sockets,1250x700x1955mm
ST7200-3A 1
High-quality, mobile experiments stand from the SybaPro range fordemonstrations and experiments. Features aluminium profile legscompatible with all add-ons and extensions for the SybaPro system.The mobile experiment stand is s upplied in kit form and needs to beassembled by customers themselves.
Table top:
30-mm table top made of highly compressed, multi-layer finechipboard conforming to DIN EN 438-1
Colour grey, RAL 7035, with 0.8-mm slightly textured laminatecoating (Resopal) on both sides , conforming to DIN 16926
Resistant to many chemicals and reagents including diluteacids and alkalis
Resis tant to heat, e.g. molten solder or heating at specificpoints such as by soldering tips or cigarette ends
Table top with solid impact-resistant protective edging madeof 3mm thick RAL 7047 coloured plas tic
Coating and adhes ive are PVC free
Power supply with 6-outlet socket strip mounted underneaththe table top, 2-m lead and earthed plugs
Frame:
2 extruded aluminium profiles wi th multiple grooves 1800 x120 x 40 mm (WxHxD)
8 equally sized grooves in extruded aluminium profiles (3 on
each side and 1 each on the front and back)
Grooves accommodate standard industrial mountings
4 H-shaped aluminium profiles, 1150 mm, for 3-layerorganisa tion of DIN A4 panels
Space for extension of power s upply duct
Base made of rectangular tubing with 4 swivelling doublecasters, 2 of which have brakes
Table frame made of tough combination of rectangular tubingaround the full perimeter
Acid-resis tant epoxy-resin coating, 80 m thick (approx.),colour RAL 7047
Dimensions:
Height of table top 760 mm
1250 x 1955 x 700 mm (WxHxD)
Accessories:
Lucas Nlle GmbH Page 16/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
17/122
19 Protection cover for three-level experiment trolleys ST8010-9Y 1
Dust cover for three-level experiment trolleys
For protecting equipment from dust and damp
For keeping equipment out of sight
Colour: matt dark grey with printed LN logo in orange)
Material: nylon fabric with polyurethane coating
High resis tant to tearing, impregnated to be washable andwaterproof
PLC application models and Process simulators
PLC application models and Process simulators
The objective of PLC training is for the student to acquire practical hands-on skills. The prerequisite for this issystematic-didactic instruction in both form and content. This allows the necessary knowledge and skills to beconveyed in a practical, fast, effective and cost-efficient manner. The hands-on oriented experimentation and
training using the process simulators and the process simulations are designed to meet these requirements. Assuch these training systems constitute the foundation for teaching not only the fundamentals but also advancedPLC programming.
Lucas Nlle GmbH Page 17/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
18/122
Pos. Product name Bestell-Nr. Anz.
20 PLC universal application simulator CO3715-1A 1
Simply combine the universal PLC application simulator with any ofthe various PLC appli cations and circuits (analog and digital) toimplem ent practical exercises with very little installation. Theexperiments are based on a s tandard syllabus. The applicationsimulator is equipped with switches and pus hbuttons as sensors aswell as LEDs and an electronic circuit to simula te actuators. Processfeedback signals (e.g. feedback signals from the contactors) aregenerated automatically. To s imulate m ovements , levels andpositions there are 3 running lights integrated into the device. Theindividual experiments are ready to perform after the overlay masksare fitted.
8 digital inputs (actuators)
20 digital outputs (sensors)
2 analog inputs (actuators)
2 analog outputs (sensors)
3 running lights
Connections realised on 4mm safety sockets
1 37-pin sub-D m ale connector (input signa ls) for theconnection to PLC via system connector
1 37-pin sub-D socket (output signals ) for connection to thePLC via the system connector
Operating voltage: DC 24V/0.3A
Size: 456 x 297 x 125mm (WxHxD)
Weight: 1 kg
CLC 34 PLC universal application simulator
CLC 34 PLC universal application simulator
The PLC universal system simulator was designed especially for PLC basic training. It is compact andconstructed according to the motto "set up, switch on and train". It is exceptionally well-suited to graphicallydemonstrate open-loop and closed-loop industrial applications. By using the masks up to 24 different technicalprocesses and models can be simulated.
Supplementary equipment set to the basic equipment set CLC 30:
Supplementary equipment set to the basic equipment set CLC 30:
Lucas Nlle GmbH Page 18/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
19/122
21 Set of overlay masks for PLC universal application simulator I (12pcs)
CO3715-1B 1
Basic set of overlay masks for the PLC Universal
Application Simulator. The bas ic set cons ists of 12 different overlay
masks with process and application models.
Construction caution light
Star-delta starting
Dahlander circuit
Starter control
Monitoring device
Reservoir - filling s ystem
Gate control of a lock
Re-rooting platform
Buffer s torage
Filling level controlled system
Mixer s ystem
Compressed air network
22 Set of overlay masks for PLC universal application simulator II (12pcs)
CO3715-1C 1
The supplementary set of overlay masks for the PLC universal
application simulator. The supplementary set comprises 12 differentoverlay masks with process and application models.
Cleaning bath
Oven door control
Bending tool
Stamping machine / automatic
Drilling mechanism
Selective distributor
Tube bending plant
Gate control
Pump control 1
Pump control 2
Reaction chamber
Automatic tablet packer
Lucas Nlle GmbH Page 19/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
20/122
Pos. Product name Bestell-Nr. Anz.
23 Manual CLC 34, Process simulators, PLC universa l systemsimulator I
SH5004-6B 1
High-quality, bound, colour teachers manual with rigid s pine,including so lutions. CD-ROM with additional students manual,including exercises and worksheets.
Details:
Theoretical background
Colour CAD drawings for experiment set-ups and circuits
Exercises and worksheets
Printed on high-quality 100-g/m colour copy paper, bookcover on 210-g/m glos sy paper
Training contents:
Brief description
Technical data
Pin assignment
Assem bly plan
Template overview
Experiment descriptions
Road-works traffic lights
Star-delta starter
Dahlander pole-changing switch
Starter control
Monitor equipment
Tank filling system
Two-door access control system
Switching pla tform
Buffer store simulation
Level control
Mixer
Compressed air net
Media:
Lucas Nlle GmbH Page 20/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
21/122
24 Manual CLC 34, Process simulators, PLC universa l systemsimulator II
SH5004-6C 1
High-quality, bound, colour teachers manual with rigid s pine,including so lutions. CD-ROM with additional students manual,including exercises and worksheets.
Details:
Theoretical background
Colour CAD drawings for experiment set-ups and circuits
Exercises and worksheets
Printed on high-quality 100-g/m colour copy paper, bookcover on 210-g/m glos sy paper
Training contents:
Brief description
Technical data
Pin assignment
Assem bly plan
Template overview
Experiment descriptions
Cleaning system
Furnace door control
Bending tool
Embossing machine
Drilling tool
Selective belt switch
Pipe bending machine
Gate control system
Pump control 1
Pump control 2
Reaction vess el
Automatic tablet filler
Pos. Product name Bestell-Nr. Anz.
25 Set of connection cables for PLC system connector SO5145-5B 1
For the connection of PLC process m odels or s imulations to the PLCsystem connector, consisting of: 2 x connection cable Sub-D 37 pole2 x safety protected connection plug, red 1 x safety protectedconnection plug, blue
Accessories:
Lucas Nlle GmbH Page 21/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
22/122
26 Safety measurement cable (4mm) , 25cm, red SO5126-8A 1
Safety measurem ent lead with s tackable, contact-protected 4-mmplugs
colour: red
length: 25 cm
cable cross-section 2,5 mm2
ratings deliver: 600V CAT II, 32A
27 System connector module for PLC CO3713-7G 1
System connector module to extend the basic unit for SIMATIC S7-300 controls for the simple connection of process models withouthaving to carry out extensive wiring of the individual lines.
1 37-pin sub-D male connector (input signals)
1 37 pin sub-D socket (output signals)
Dimens ions: 125 x 65 x 25mm (HxWxD)
Lucas Nlle GmbH Page 22/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
23/122
CLC 35 Process simulation PRO/TRAIN for Windows
CLC 35 Process simulation PRO/TRAIN for Windows
Effecient and didactically sensible training on the highly complex production systems found in industry is onlyfeasible to some extent in automation technology. Thus training systems must be used which graphicallydemonstrate system interdependencies and that can be explored by the student without directly affecting theproduction process. PRO/TRAIN for Windows is a training system which allows various automated processes tobe depicted and simulated at a work station for practical hands-on experimentation.
The training system consists of software, hardware and teachware. The software simulates and graphicallydepicts typical, technological processes, machines and drives on a PC. The software models are graphicallydetailed and realistically depicted both in terms of design as well as operating response. For each model thereis the possibility of performing process analysis in demonstration mode. Malfunctions are realistically simulatedin the process simulations for practical experience and can be initiated randomly or simulated by the user usingthe keyboard. Control errors are identified and logged by the software. The switches and pushbuttons needed tooperate the models are already integrated into the respective simulations. The use of real hardware for operation
and monitoring, e.g. an Operator Panel, is easily integratable. The I/O interface connects the PC via the serialinterface using the signal inputs and outputs of a PLC control unit. As such process models with digitalactuators and sensors as well as analog final control elements and signal generators can be connected andcontrolled. The actuators incorporated in the model can be controlled directly by the PLC and the switchingstates of the signal generators are transmitted to the PLC. The signal level for connection to the PLC has beenselected so that any given industrial-type PLC can be connected to the interface. The input and output signals ofthe process are accessible on the interface and can be checked by means of electronic measurement. Eachmodel package has an in-depth, state-of-the-art online help using browser technology. These contain generaldescriptions of the simulation models, control exercises as well as sample PLC programs. The control programsare generally applicable system function charts documented in accordance with the IEC-1131 standard. Theinput and output signals are outlined in the statement lists and IQF reference lists. This guarantees simpletranslation into the respective programming language.
Lucas Nlle GmbH Page 23/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
24/122
Pos. Product name Bestell-Nr. Anz.
28 I/O-Interface for PRO/TRAIN for Windows CO3715-1H 1
PC interface to couple process s imula tion software and any giventype of PLC with indus trial-type s ignal levels. All inputs and outputsare arranged on 4mm s afety sockets and are parallel to two 37-pinsystem connectors. The status of the digital inputs and outputs isindicated via LEDs. Connected to PC via the serial interface.
16 digital inputs, 24V DC
16 digital outputs, 24V DC
2 analog inputs, 0-10V resolution 11Bit
4 analog outputs, 0-10V resolution 11Bit
Voltage supply: 24V, 1A
Dimens ions: 297 x 227 x 60mm (HxWxD)
Weight: 1kg
Supplementary equipment set to the basic equipment set CLC 30:
Supplementary equipment set to the basic equipment set CLC 30:
Lucas Nlle GmbH Page 24/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
25/122
Pos. Product name Bestell-Nr. Anz.
29 Software PRO/TRAIN fr Windows Pneumatik (D) SO6001-6C 1
In diesem Trainingspaket werden technologische Prozesse ausdem Bereich der Elektropneumatik modelliert. Mit den Modellenknnen s teuerungstechnische Aufgabenstellungen zur Steuerungvon pneumatischen Anlagen und Antrieben, zurStrungsberwachung und -meldung realis iert werden. AlleSensoren und Aktoren, die zur Steuerung des Prozess es bentigtwerden, sind im Prozess modell integriert. In den Modellen werden inden unterschiedlichen Bewegungssituationen die jeweiligenDruckverhltnisse sichtbar gemacht. Das Paket umfass t zweiProzessmodelle:
Grundschaltungen:
Das Prozessmodell umfasst alle notwendigen Elemente einerPneumatikanlage von der Druckerzeugerstation bis zu denverschiedenen Pneumatikzylindern. Die Steuerung derverschiedenen pneumatischen Antriebe erfolgt berelektromagnetische Wegeventile. Zum Betrieb werden folgendeSignale auf der SPS bentigt:
15 digitale Eingnge
11 digitale Ausgnge
Bohrvorrichtung:
Mit der Bohrvorrichtung sollen Werkstcke automatis ch gebohrtwerden. Dazu werden die Werkstcke aus einem Magazin vereinzeltund auf einen Bohrtisch transportiert, automatisch gebohrt undwieder ausgeworfen. Die Steuerung der elektropneumatischenAntriebe erfolgt in dies em Prozessm odel l ber elektromagnetis cheWegeventile. Zum Betrieb werden folgende Signale auf der SPS
bentigt:
13 digitale Eingnge
10 digitale Ausgnge
In den beiden Prozessmodellen ist jeweils ein Bedienpanel mit allenzur Bedienung der Anlage erforderlichen Taster, Schalter undMeldeleuchten integriert. Zur Fehlersuche knnen verschiedeneStrungen wie defekte Sensoren und b lockierte Zylinder s imuliertwerden. Zu jedem Modell wi rd eine Auflagemaske zum I/O-Interfacemit Kennzeichnung der Ein- und Ausgangss ignale m itgeliefert.
Software:
Software for creating your own process models:
Lucas Nlle GmbH Page 25/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
26/122
30 Software PRO/TRAIN fr Windows Hydraulik (D) SO6001-6E 1
In diesem Trainingspaket werden technologische Prozesse ausdem Bereich der Elektrohydraulik modelliert. Mit diesen Modellenknnen s teuerungstechnische Aufgabenstellungen zur Steuerungvon hydraulischen Antrieben, zur Strungsberwachung und -
meldung realis iert werden. Alle Sens oren und Aktoren, die zurSteuerung des Prozesses bentigt werden, sind im Prozessmodellintegriert. Das Paket umfasst zwei Prozess model le:
Hydraulikantriebe:
Das Prozessmodell umfasst verschiedene Hydraulikantriebe, dieber elektromagnetische Wegeventile ges teuert werden. ZumBetrieb werden folgende Signale auf der SPS folgende bentigt:
13 digitale Eingnge
9 digitale Ausgnge
Stellantrieb:
Das Prozessmodell umfasst alle notwendigen Elemente einerHydraulikanlage zur Realisierung eines hydraulischen
Stellantriebes . Die Steuerung des Antriebes erfolgt ber einelektromagnetisches Wegeventil. Zum Betrieb werden folgendeSignale auf der SPS folgende bentigt:
10 digitale Eingnge
8 digitale Ausgnge
In den beiden Prozessmodellen ist jeweils ein Bedienpanel mit allenzur Bedienung der Anlage erforderlichen Taster, Schalter undMeldeleuchten integriert. Zur Fehlersuche knnen verschiedeneStrungen wie zum Beispiel defekte Sensoren, blockierte Zylindersowie das Auslsen des Temperaturkontaktes sim uliert werden. Zujedem Modell wi rd eine Auflagem aske zum I/O-Interface mitKennzeichnung der Ein- und Ausgangss ignale m itgeliefert.
Lucas Nlle GmbH Page 26/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
27/122
31 Software PRO/TRAIN fr Windows Elektrische Maschinen (D) SO6001-6G 1
In diesem Trainingspaket werden technologische Prozesse ausdem Bereich der Elektrischen Maschinen modelliert. Mit diesenModellen knnen s teuerungstechnische Aufgabenstellungen zumSchalten, Schtzen und berwachen der Antriebe realis iert werden.
Alle Sensoren und Aktoren, die zur Steuerung des Prozessesbentigt werden, sind im Prozess model l integriert. . Die Schaltgertesind mit Hilfskontakten ausgestattet, ber die der SPS, die aktuelleSchaltstellung m itgeteilt wird. Zur Anzeige der aktuellen Drehzahl derMaschine is t eine Digitalanzeige vorhanden. Das Paket umfasst dreiProzessmodelle:
Wendeschtzschaltung:
Das Prozessmodell umfasst die Elektroanlage zum Schalten einerDrehstrom-Asynchronmas chine mit zwei Drehrichtungen. ZumBetrieb werden folgende Signale auf der SPS bentigt:
6 digitale Eingnge
5 digitale Ausgnge
Stern-Dreieck Anlasserschaltung:
Das Prozessmodell umfasst die Elektroanlage zum Schalten einerDrehstrom-Asynchronmas chine mit Stern-DreieckAnlass erschaltung fr eine Drehrichtung. Zum Betrieb werdenfolgende Signale auf der SPS bentigt:
6 digitale Eingnge
5 digitale Ausgnge
Frequenzumrichter:
Das Prozessmodell umfasst die Elektroanlage zum Betrieb einerDrehstrom-Asynchronmas chine an einem Frequenzumrichter. DerFrequenzumrichter verfgt dazu ber industrietypische Steuerein-und aus gnge. Zum Betrieb werden folgende Signale auf der SPSbentigt:
7 digitale Eingnge
7 digitale Ausgnge
2 analoge Eingnge 0 - 10V
1 analoger Ausgang 0 - 10V
In allen drei Prozessmodellen ist jeweils ein Bedienpanel mit allenzur Bedienung der Anlage erforderlichen Taster, Schalter undMeldeleuchten integriert. Zur Fehlersuche knnen verschiedeneStrungen wie zum Beis piel: Ausls en des Leitungss chutzschalters,Kontakte eines Schtzes sind festgeklebt, Leistungss chtz ziehtnicht mehr an, Strung Frequenzumrichter sowie Ausls en einesMotorschutzschalters s imuliert werden. Zu jedem Modell wird eine
Auflagemaske zum I/O-Interface mit Kennzeichnung der Ein- undAusgangss ignale mitgelie fert.
Lucas Nlle GmbH Page 27/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
28/122
32 Software PRO/TRAIN fr Windows Fertigungstechnik (D) SO6001-6J 1
In diesem Trainingspaket werden technologische Prozesse ausdem Bereich der Fertigungstechnik modelliert. Mit diesen Modellenknnen s teuerungstechnische Aufgabenstellungen fr Ablauf- undFolgesteuerungen, zur Strungsberwachung und -meldung
realisiert werden. Das Paket umfat zwei Prozemodelle:Abfllanlage:
In dieser Abfllanlage s oll eine eins tellbare Anzahl von Produkten indie auf dem Laufband ankomm enden Behlter abgefllt werden. MitHilfe von Sensoren werden die leeren Behlter auf Beschdigungberprft und gegebenenfalls entfernt. Die unbes chdigten Behlterlaufen weiter zur Abfllanlage und werden dort mit einer vorgegebenAnzahl von Produkten befl lt und danach mit einem Deckelverschlos sen. Alle Sens oren und Aktoren, die zur Steuerung desProzess es bentigt werden, sind im Prozessmodell integriert. Dazuwerden auf der SPS folgende Signale bentigt:
16 digitale Eingnge
9 digitale Ausgnge
Sortieranlage:
Mit der Sortieranlage sollen ankommende Pakete mit Hilfe vonSensoren ih rer Gre entsprechend auf drei Laufbnder verteiltwerden. Alle Sens oren und Aktoren, die zur Steuerung desProzess es bentigt werden, sind im Prozessmodell integriert. Dazuwerden auf der SPS folgende Signale bentigt:
14 digitale Eingnge
16 digitale Ausgnge
In den beiden Prozessmodellen ist jeweils ein Bedienpanel mit allenzur Bedienung der Anlage erforderlichen Taster, Schalter undMeldeleuchten integriert. Zur Fehlersuche knnen verschiedene
Strungen wie zum Beispiel defekte Sensoren s owie das Ausls envon Motorschutzschaltern s imulie rt werden. Zu jedem Modell wirdeine Auflagemaske zum I/O-Interface mit Kennzeichnung der Ein-und Ausgangs signale mitgeliefert.
Lucas Nlle GmbH Page 28/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
29/122
33 Software PRO/TRAIN fr Windows Verfahrenstechnik (D) SO6001-6L 1
In diesem Trainingspaket werden technologische Prozesse ausdem Bereich der Verfahrenstechnik mode lliert. Mit diesen Modellenknnen steuerungs technische Aufgabenstellungen frAblaufsteuerungen und Folgesteuerungen, zur
Strungsberwachung und -meldung realis iert werden. AlleSensoren und Aktoren, die zur Steuerung des Prozess es bentigtwerden, sind im Prozess modell integriert. Das Paket umfat zweiProzemodelle:
Pumpenanlage:
Ein Wasserbehlter wird als Speicherbecken fr Schmutzwasser mitdiskontinuierlichem Zulauf genutzt. Mittels zweier Pumpen wird dasSchmutzwasser aus dem Speicherbecken abgepumpt. DieSteuerungsaufgabe liegt darin, das Flss igkeitsniveau imSpeicherbecken in gewis sen Grenzen zu halten. Dazu werden aufder SPS folgende Signale bentigt:
14 digitale Eingnge
7 digitale Ausgnge
Mischanlage:
In einer Mischanlage sollen zwei verschiedene Flssigkeiten nacheinem einstellbaren Mischungsverhltnis in einem Tankbehltergemis cht werden. Zur bess eren Reaktion der beiden Stoffe wird dasFlssigkeitsgemisch mit einem Rhrer vermischt und ber eineHeizung auf eine bestimmte Temperatur aufgeheizt. Dazu werdenauf der SPS folgende Signale bentigt:
16 digitale Eingnge
13 digitale Ausgnge
3 analoge Eingnge 0 - 10V
2 analoge Ausgnge 0 - 10V
In den beiden Prozessmodellen ist jeweils ein Bedienpanel mit allenzur Bedienung der Anlage erforderlichen Taster, Schalter undMeldeleuchten integriert. Zur Fehlersuche knnen verschiedeneStrungen wie zum Beispiel defekte Sensoren und Antriebe sowiedas Ansprechen der Motorschutzschalter s imuliert werden.
Lucas Nlle GmbH Page 29/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
30/122
34 Software PRO/TRAIN fr Windows Entwicklungssoftware (D) SO6001-6S 1
Entwicklungss oftware zur Erstellung eigener Prozesss imulationenzum Ausbildungs system PRO/TRAIN fr Windows . DieEntwicklungss oftware erlaubt die komfortable Erstellung einfacherbis kom plexer Prozess visualis ierungen, Animationen ohne jegliche
Programmierung.Einfach zu handhabende, grafische WINDOWS-Benutzeroberflche
Umfangreiche Bibliothek von Systemblcken aus denBereichen Signalgeneratoren, lineare und nichtlinearebertragunsglieder, zeitdiskrete Systeme, Statistik,Digitaltechnik, virtuelle Instrumente
Zusammenfassen von Teilsystemen zu wiederverwendbarenModulen
Systemblcke zur Anbindung des I/O-Interface
Folgende Elemente stehen zur Visual isierung und Animation zur
Verfgung:
Linien und Polylinien
Kreise, Ellipsen, Rechtecke, Dreiecke und Parallelogramme
y-t- und x-y-Grafiken
Mehrspaltige Tabellen
Bitmaps und Windows-Metafiles
Bitmap-Statusanzeigen und Bitmap-Sequenzen (anim ierteBitmaps)
Video fr Windows-Dateien (AVI-Dateien)
Sound-Unters ttzung (WAV-Dateien)
Statische Texte und Textmeldungen
Zeit- und Datums felder
Numerische Ausgabefelder
Horizontale und vertikale Balkenanzeigen, Ablaufanzeigen,Thermometer
LED-Anzeigen und LCD-Panels
Analogins trumente (skal ierbar)
Schalter und Taster s owie Bitmap-Schaltflchen undSchaltergruppen
Schaltflchen mit Sonderfunktionen (z. B. zur
Simulationssteuerung)
Editierfelder
Schaltfelder (Checkboxen)
Horizontale und vertikale Schieberegler
Horizontale und vertikale Leitungen (anim iert)
Tanksysteme (animiert)
Ventile, Hydraulikzylinder, Pumpen und Motoren (animiert)
Betriebssystem:
PRO/TRAIN is t unter allen Windowsversionen lauffhig
Lucas Nlle GmbH Page 30/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
31/122
Pos. Product name Bestell-Nr. Anz.
35 Serial interface cable 9/9 pole LM9040 1
9-pin SUB-D cable
Length: 2m
Connector: 9-pin plug/9-pin socket
Pin assignment: 1:1
36 Set of connection cables for PLC system connector SO5145-5B 1
For the connection of PLC process m odels or s imulations to the PLCsystem connector, consisting of: 2 x connection cable Sub-D 37 pole2 x safety protected connection plug, red 1 x safety protectedconnection plug, blue
37 System connector module for PLC CO3713-7G 1
System connector module to extend the basic unit for SIMATIC S7-300 controls for the simple connection of process models withouthaving to carry out extensive wiring of the individual lines.
1 37-pin sub-D male connector (input signals)1 37 pin sub-D socket (output signals)
Dimens ions: 125 x 65 x 25mm (HxWxD)
Pos. Product name Bestell-Nr. Anz.
38 USB-RS232 interface adapter with 9-pin SUB-D plug LM9062 1
USB-RS232 in terfaceadapter with 9-pin SUB-D plug
Accessories:
Additionally recommended
Lucas Nlle GmbH Page 31/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
32/122
CLC 36 Closed-loop liquid level control/ flow-rate control
CLC 36 Closed-loop liquid level control/ flow-rate control
"Closed-loop liquid level control" is a practice-oriented experiment set in applied control technology designedespecially for didactic purposes. Due to immediate, visible nature of the controlled variable, i.e. "the level of theliquid", liquid level control is an extremely graphic experiment and is thus particularly well suited for anintroduction into automatic control technology. The controlled system or liquid level basin is characterised by thefact that it has a medium response time. Thus experiments can be performed rapidly and the student cansimultaneously monitor how the experiment is proceeding. The experiments focus on determining the mostimportant parameters of controlled systems with compensation and the set-up and optimisation of control loopswith continuous and discontinuous controllers. The liquid level basin has a plain form on which the foils can beattached to facilitate the marking of the liquid level as a function of time. The character of the controlled system
can be modified by using various sliding partitions (delays of the 1stand 2ndorder). 4 different outlet drains canbe set on the filling basin and the inlet can be set as desired either using an ascending pipe or versus the fillingpressure. Because of its modular design, the training system can, with the corresponding supplements, also be
used for automatic flow-rate control and to explore measuring techniques.
Automatic liquid-level control
Set-up, putting into operation and optimising an automatic liquid-level control with variable controlledsystem characteristics
Two-position controller in an integral-action controlled system of a higher order
Two-position controller with delayed feedback in a closed-loop liquid level control system
Two-position controller with float switch
PI and PID controller in a closed-loop control system of the first and higher orders
Automatic liquid level control with disturbance variable forward feed and precontrol
Automatic flow-rate control
Set-up, putting into operation and optimising an automatic flow-rate control with variable controlledsystem characteristics
Operating principle, response and application of flow-rate measurement
Investigating automatic flow-rate control with PI or PID controller and system response to disturbance andreference variable step changes
Operating principle and use of step controllers and closed-loop flow-rate control with step controllers
Lucas Nlle GmbH Page 32/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
33/122
Pos. Product name Bestell-Nr. Anz.
39 Compact level control kit including vessel, tank, pump and sensors CO3620-1H 1
The filling level meas urement training system is for experiments inautomatic control technology that are both educational and bas ed onpractice. Liquid level and flow can both be meas ured with oneinstrument.
Since the controlled variable, the height of liquid in the vess el isclearly visible, it makes the experiment easy to observe and m akesfor a good introduction to automatic control technology. The compacteducational apparatus includes the vess el to be filled, a press uretransducer to determine the current filling height and a s eparatereservoir and pump.
So that the pump achieves constant pumping power, a secondarycontrol loop with a flow rate meter which can shut off the system asnecess ary is integrated into the set-up. Disturbance variables can besim ulated by means of adjustable throttle valves that alter the flowrate to and from the vessel. Quick-release plugs are available forconnecting an optional second vessel in order to create a secondorder controlled system.
Secondary flow-rate control loop
Integrated power am plifier
Transparent vessel for obs erving the height of liquid
A second vessel can be connected via quick-release plugs tomake a second order control system.
Disturbance variables can be simulated by means ofadjustable throttle valves
Measurement site for pressure sensor in the vesselPressure sensor to measure height of liquid complete withimmersible tube
Output voltage: 0 - 10V
Calibration of zero point and gain
Additional em ergency overflow outlet
Reservoir for liquid
Operating voltage: +/-15VDC
Nomina l current: 1.2A
Dimens ions: 297 x 456 x 160mm (HxWxD)
Weight: 3.0kg
Supplementary equipment set to the basic equipment set CLC 30:
Supplementary equipment set to the basic equipment set CLC 30:
Lucas Nlle GmbH Page 33/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
34/122
Pos. Product name Bestell-Nr. Anz.
40 Manual IAC 10/11, Level and flow control kit with digital controller SH5003-6A 1
High-quality, bound, colour teachers manual with rigid s pine,including so lutions. CD-ROM with additional students manual,including exercises and worksheets.
Details:
Theoretical background
Colour CAD drawings for experiment set-ups and circuits
Exercises and worksheets
Printed on high-quality 100-g/m colour copy paper, bookcover on 210-g/m glos sy paper
Training contents:
Automatic liquid-level control
Set-up, operation and optimis ation of an automatic liquid-level control with variable controlled system characteristics
PI and PID controller in a clos ed-loop control system o f thefirst and higher orders
Automatic flow-rate control
Set-up, operation and optimisa tion of an automatic flow-rate
control with variable controlled system characteristics
Operating principle, response and application of flow-ratemeasurement
Investigating automatic flow-rate control with PI or PIDcontroller and system respons e to disturbance and referencevariable s tep changes
Media:
Lucas Nlle GmbH Page 34/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
35/122
Pos. Product name Bestell-Nr. Anz.
41 DC Power supply, 15V/6A CO3538-8A 1
Stabilized power s upply
Output: +/-15V/6A, electrically isolated from the mains,continuously protected agains t short-circuit
Dimens ions: 297 x 114 x 145mm (HxWxD)
Pos. Product name Bestell-Nr. Anz.
42 Multi13S digital multimeter LM2330 1
Universal precision lab m ultimeter and temperature meter with IRinterface for high-quali ty, universal measurement and tes ting ineducational settings, power plants, process control installations e tc.
3-digit multimeter; resolution: 3,100 digits
Measurement class ification CATII-1000V
Can be connected to UniTrain-I system via IR interface
Voltage and current measuring ranges: 30mV-1000V DC, 3V-1000V AC; 3mA-16A DC; 30mA-10A AC
Resistance ranges: 30ohm-30Mohm
Special functions: C for temperature measurements usingPT100/1000 thermocouple
Continuity and diode testing
Automatic range s election and battery shut-off, min./max. anddata hold function
Safety fuse for current measurement range up to 300mA
Protection agains t high currents in the mA range for nominalvoltage of 1000V
Display with bar chart and backlighting
Includes protective sleeve, measuring leads , 1 x spare fuse,9V battery, calibra tion certificate
Power supply:
Measuring instruments:
Lucas Nlle GmbH Page 35/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
36/122
Pos. Product name Bestell-Nr. Anz.
43 Safety connection plug 19mm/4mm, red SO5126-9U 1
Max. sustained current: 24A
Contacts: 4mm laminated plugs
Contact-protected
Insulation clas s CAT II / 600V
44 Safety connection plug 19mm/4mm, blue SO5126-9V 2
Max. sustained current: 24A
Contacts: 4mm laminated plugs
Contact-protected
Insulation class CAT II / 600V
45 Safety connection plug 19mm/4mm, black SO5126-9Y 1
Max. sustained current: 24A
Contacts: 4mm laminated plugs
Contact-protectedInsulation class CAT II/600V
46 Safety connection plug 19mm/4mm, black, with tapping SO5126-9R 2
Max. sustained current: 24A
Contacts: 4mm laminated plugs
Contact-protected
Insulation clas s CAT II / 600V
47 Set of safety measurement cables 4mm (30pcs) SO5148-2A 1
This set consists of:
10 sa fety connection leads, 4mm , 25cm, black
10 sa fety connection leads, 4mm , 50cm, black
2 safety connection leads, 4mm, 100cm, red
6 safety connection leads, 4mm, 100cm, black
2 safety connection leads, 4mm, 100cm, blue
Accessories:
Lucas Nlle GmbH Page 36/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
37/122
CLC 37 PLC Touch Panel Models
CLC 37 PLC Touch Panel Models
The touch panel models provide a system with which students can swiftly master an introduction to TIA (TotallyIntegrated Automation) portals. The models are designed to cover all the basic functionality of PLCprogramming. All the topics are included, from programming of data blocks, state machine and sequentialprogramming, right up to the design of controllers.
The animated illustration of the models simplifies understanding of how the models respond to programming.What was previously indicated by means of flashing LEDs or by additional software can now be replaced by acompact system.
By activating the PLC systems digital outputs, the models can be manually controlled without difficulty, so thatstudents can investigate precisely how they function.
Lucas Nlle GmbH Page 37/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
38/122
Pos. Product name Bestell-Nr. Anz.
48 Interactive Lab Assistant: CLC 37 PLC Touch Panel Models SO2800-4M 1
Instructions are provided in the form of an Interactive Lab Assis tantcourse. This multimedia course goes step-by-step through the topicof PLC programming. Students are introduced in s teps to PLCprogramm ing, from the simple operation of a conveyor belt on tocomplex sequence control systems. The projects are made simpleto understand thanks to graphic illustrations and animations.
The models are shown in animated form on a touch panel and arecontrolled via the digital I/O of the PLC system to which they areconnected. As for genuine models, it is poss ible to receive thesignals from s ensors which can then be used for processing in astep sequence. The models are already full programmed assupplied.
Projects included:
Transport crane (step sequence programm ing for advanced
students)Road works traffics lights (anim ated vehicles respondautomatically to the state of the traffic lights)Container filling plant (process automation of a system withthree tanks)Conveyor belt (introduction to step sequence programmingwith plenty of exercises)Three-storey lift (state machine and step s equenceprogramming)Star-delta s tarting circuit (timer programm ing)Dual 7-segment display (programming of data blocks)Automatic room temperature control (use of a clos ed-loopcontrol module)
Special features:
Questions wi th feedback and evaluation software for
asses sment of knowledgePrintable document so that the experiment ins tructions andsolutions can be printed out easily4 MB memory card for programming the PLC systemCD-ROM with Labs oft browser, course s oftware and TIAportal project
Benefits to you:
Compact system (PLC, touch panel and models , all in asingle piece of equipment)Program ming via TIA (Totally Integrated Automation) portalProgramming and observation on one screen. Alternativesoftware solutions require a separate screenIntroduction to programming via TIA portal with the he lp ofanimated models
Supplementary set for basic equipment set CLC 12:
Lucas Nlle GmbH Page 38/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
39/122
Pos. Product name Bestell-Nr. Anz.
49 PLC application model, automatic stamp machine LM8848 1
Practice-oriented, application mode l for simulating complexautomatic production machines. The stamp machine incorporatessequence control for transport, clamping, printing and cuttingworkpieces. The unit is mounted on a metal bas e-plate and placedon the benchtop for operating. The compress ed air cylinders aredriven by a solenoid valve unit (accessories ), which is also mountedon the m etal base-plate. All cylinders are fitted with indicators fordetecting the pos ition of the pistons.
10 digital inputs
9 digital inputs
9 initiators with LED display
4 compressed air cylinders
1 rotary actuator 270
8 restricting, check valves for speed and torque adjus tment
Pneumatic connections with quick snap-on couplings
Electric connections on 37-pin SUB-D system connector
Power supply: DC 24V/0.6A
Dimens ions: 520 x 305 x 270mm (HxWxD)
Weight: 11.7kg
PLC application models
PLC application models
CLC 40.1 Automatic stamping machine
CLC 40.1 Automatic stamping machine
Supplementary equipment set to the basic equipment set CLC 30:
Supplementary equipment set to the basic equipment set CLC 30:
Lucas Nlle GmbH Page 39/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
40/122
50 Solenoid valve unit for automatic stampmachine LM8839 1
Solenoid valve unit for driving pneum atic simu lation mode ls by PLCsystems. The unit is joined to the automatic stamp machine to form asingle operating unit. 4 x 5/2-way solenoid valves 1 x 5/3-waysoleno id valves 1 x pneumatic maintenance unit with 3/2-way stopvalve Pneumatic connections with quick, snap-on couplings
Electrical connections on 37-pin SUB-D system connector Fully-wired (electric and pneumatic) Dimens ions: 195 x 275 x 270mm(HxWxD) Weight: 7.3kg
Pos. Product name Bestell-Nr. Anz.
51 System connector module for PLC CO3713-7G 1
System connector module to extend the basic unit for SIMATIC S7-300 controls for the simple connection of process models withouthaving to carry out extensive wiring of the individual lines.
1 37-pin sub-D male connector (input signals)
1 37 pin sub-D socket (output signals)
Dimens ions: 125 x 65 x 25mm (HxWxD)
52 Set of connection cables for PLC system connector SO5145-5B 1
For the connection of PLC process m odels or s imulations to the PLCsystem connector, consisting of: 2 x connection cable Sub-D 37 pole2 x safety protected connection plug, red 1 x safety protectedconnection plug, blue
Accessories:
If there is no compressed air supply available, we recommend the following accessories for the pneumatic PLCapplication models:
Lucas Nlle GmbH Page 40/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
41/122
53 Compressor, low-noise SE2902-9L 1
Extremely quiet compres sed air s ystem wi th compress or motor,thermo switch and automatic press ure switch. Tanks made ofspecial steel wi th security valve and non-return valve, mas terpress ure gauge, condensation drain, stop valve and maintenance
unitMotor output: 0.34 kW
Suction capacity: 50 l/min
Power consumption at 8 bars: 2.9 A
Pressure: 8 bars
Tank capacity: 15 l.
Noise level: 45 dB(A)/1m
Operating voltage: 230V AC
incl. tube and connection set
Dimens ions: 500x410x410 mm (HxWxL)
Weight: 19 kg
54 Connection hose, 25m SE2902-9A 1
Connection hose, 25 m tr.
55 Accessory set, Pneumatics SE2902-9C 1
5 s nap on-couplings
10 dummy plugs
1 hose cutter
1 Allen key
1 C-spanner
Lucas Nlle GmbH Page 41/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
42/122
Pos. Product name Bestell-Nr. Anz.
56 Manual CLC 40.1, Control techniques using authentic PLC processmodels
SH5004-6E 1
High-quality, bound, colour teachers manual with rigid s pine,including so lutions. CD-ROM with additional students manual,including exercises and worksheets.
Details:
Theoretical background
Colour CAD drawings for experiment set-ups and circuits
Exercises and worksheets
Printed on high-quality 100-g/m colour copy paper, bookcover on 210-g/m glos sy paper
Training contents:
General introduction
Control of a stamping machine using PLC
Pos. Product name Bestell-Nr. Anz.
57 IMS connector card 25-pin SO3713-7Y 1
Universal adapter for connecting experiment stations with differentconnectors. With clamp for attaching to terminal rails and with thefollowing connectors:
25-pin D-Sub connector
25-pin terminal strip
25 x 4mm experiment sockets
58 IMS connector card 9-pin SO3713-7Z 1
Universal adapter for connecting experiment stations with differentconnectors. With clamp for attaching to terminal rails and with thefollowing connectors:
9-pin D-Sub connector
9-pin terminal strip
9 x 4mm experiment sockets
Media:
Optional accessories for conventional integration of PLC system models
Lucas Nlle GmbH Page 42/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
43/122
CLC 40.2 Elevator (lift) model
CLC 40.2 Elevator (lift) model
Lucas Nlle GmbH Page 43/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
44/122
Pos. Product name Bestell-Nr. Anz.
59 Lift model with three stories LM9545 1
Real model of an elevator with cabin for 3 floors and integratedPROFIBUS DP slave. Each floor can be selected from anoperating panel and from each floor. Thanks to the open design ofthis model, each movement sequence can be checked visually.The cabin and the doors on the individual floors are driven byelectric motors. Each end position is detected by initiators. Allinputs for driving the electric motors and LEDs and all outputs ofthe feedback signals are connected to the IMS-Connector.
14 digital inputs
11 digital outputs
EMERGENCY OFF pushbutton
Control elements for each floor
1 x Sub-D, 25-pole
1 x Sub-D, 9-pole
Power supply: DC 24V/0.5A
Dimensions: 726 x 340 x 125 mm (HxWxD)Depth base:262 mm
Weight: 4.2kg
Integrated PROFIBUS DP slave:
Address range:16 digital input/outputs
PROFIBUS DP connector: 9-pin DSUB socket
Rotary switch for setting address
Transmission rates of up to 6 Mbit/s
GSD file for use with control software (e.g.: STEP7)
Pos. Product name Bestell-Nr. Anz.
60 IMS interface module for PLC CO3713-7F 1
IMS connector module for extending a SIMATIC S7-300 base systemfor easy connection of IMS stations and sub-s ystems avoidingcomplex wiring and individual cables.
Sockets for emergency shutdown loop (Voltage isolation foroutput modules)
1 D-SUB 25-pin socket
1 D-SUB 9-pin socket
Dimens ions: 125 x 65 x 25mm (HxWxD)
Supplementary equipment set to the basic equipment set CLC 30:
Supplementary equipment set to the basic equipment set CLC 30:
Accessories:
Lucas Nlle GmbH Page 44/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
45/122
61 25-pin serial interface cable, Sub-D plug/socket LM9061 1
25 pin Sub-D connection cable
Length: 2m
Connection: 25-pin plug / 25-pin socket
Pin assignment: 1:1
62 Serial interface cable 9/9 pole LM9040 1
9-pin SUB-D cable
Length: 2m
Connector: 9-pin plug/9-pin socket
Pin assignment: 1:1
Lucas Nlle GmbH Page 45/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
46/122
Pos. Product name Bestell-Nr. Anz.
63 Manual CLC 40.2, Control techniques using authentic PLC processmodels
SH5004-6D 1
High-quality, bound, colour teachers manual with rigid s pine,including so lutions. CD-ROM with additional students manual,including exercises and worksheets.
Details:
Theoretical background
Colour CAD drawings for experiment set-ups and circuits
Exercises and worksheets
Printed on high-quality 100-g/m colour copy paper, bookcover on 210-g/m glos sy paper
Training contents:
General introduction
Lift control via PLC
Introduction
System and performance specifications
Layout and wiring plan
Creating a project with the SIMATIC Manager
Assignment lis t
Exercise 1: Door control
Exercise 2: Cab control
Exercise 3: 2-floor elevator control
Exercise 4: 3-floor elevator control
Exercise 5: Sequence with door control
Exercise 6: Lift control requirements
64 QuickChart, Elevator model (GB) SO6200-5G 1
Short documentation covering the putting into operation of complexequipment and experiment set-ups.
Terminal ass ignment, safety instructions, helpCircuit and assembly diagramsColor print i n DIN A3 formatLaminated: 2 x 250 m
Media:
Lucas Nlle GmbH Page 46/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
47/122
Pos. Product name Bestell-Nr. Anz.
65 IMS connector card 25-pin SO3713-7Y 1
Universal adapter for connecting experiment stations with differentconnectors. With clamp for attaching to terminal rails and with thefollowing connectors:
25-pin D-Sub connector
25-pin terminal strip
25 x 4mm experiment sockets
66 IMS connector card 9-pin SO3713-7Z 1
Universal adapter for connecting experiment stations with differentconnectors. With clamp for attaching to terminal rails and with thefollowing connectors:
9-pin D-Sub connector
9-pin terminal strip
9 x 4mm experiment sockets
Optional accessories for conventional integration of PLC system models
CLC 40.3 Sliding Door
CLC 40.3 Sliding Door
Lucas Nlle GmbH Page 47/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
48/122
Pos. Product name Bestell-Nr. Anz.
67 Sliding gate model LM9542 1
Model of a sliding door with a 24 V DC drive motor, including controlconsole on A3-sized training panel cons isting of the followingcomponents:
1 x 24 V DC motor
1 x Light barrier
2 x End-limit switches
3 x Illuminated buttons
1 x Changeover switch
1 x DSUB 25 IMS connector
Dimens ions: 297 x 456 x 125mm (HxWxD)
Pos. Product name Bestell-Nr. Anz.
68 IMS interface module for PLC CO3713-7F 1
IMS connector module for extending a SIMATIC S7-300 base systemfor easy connection of IMS stations and sub-s ystems avoidingcomplex wiring and individual cables.
Sockets for emergency shutdown loop (Voltage isolation foroutput modules)
1 D-SUB 25-pin socket
1 D-SUB 9-pin socket
Dimens ions: 125 x 65 x 25mm (HxWxD)
69 25-pin serial interface cable, Sub-D plug/socket LM9061 1
25 pin Sub-D connection cable
Length: 2m
Connection: 25-pin plug / 25-pin socket
Pin assignment: 1:1
Supplementary equipment set to the basic equipment set CLC 30:
Supplementary equipment set to the basic equipment set CLC 30:
Accessories:
Lucas Nlle GmbH Page 48/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
49/122
Pos. Product name Bestell-Nr. Anz.
70 IMS connector card 25-pin SO3713-7Y 1
Universal adapter for connecting experiment stations with differentconnectors. With clamp for attaching to terminal rails and with thefollowing connectors:
25-pin D-Sub connector
25-pin terminal strip
25 x 4mm experiment sockets
71 IMS connector card 9-pin SO3713-7Z 1
Universal adapter for connecting experiment stations with differentconnectors. With clamp for attaching to terminal rails and with thefollowing connectors:
9-pin D-Sub connector
9-pin terminal strip
9 x 4mm experiment sockets
Optional accessories for conventional integration of PLC system models
CLC 40.4 3-Axes positioning unit
CLC 40.4 3-Axes positioning unit
Lucas Nlle GmbH Page 49/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
50/122
Pos. Product name Bestell-Nr. Anz.
72 PLC application model, 3-axes positioning unit LM8856 1
Practice-oriented 3-axes app lication model for simulating transportprocesses. A small magnetic disk can be picked up from the base-plate by a magnet, lifted by one axis and placed at any x,y position.The model is ideally suited to learning the sequence control of aPLC. The programm ing of end-switches is taught in a realisticmanner.
15 Digital inputs
10 Digital outputs
Integrated control pult with all pus hbuttons, switches andsignal lamps necessary for operation
1 SUB-D 37-pin plug (input signals ) for connecting PLC via
system connector
1 SUB-D 37-pin socket (output signals ) for connecting PLCvia s ystem connector
1 SUB-D 25-pin socket for connecting a fault simulation box
Positioning accuracy: approx. 1mm
Power supply: DC 24V via s ystem connector
Max. current consumption: 250mA
Dimens ions: 450 x 400 x 450mm (HxWxD)
Weight: 8.0kg
Pos. Product name Bestell-Nr. Anz.
73 System connector module for PLC CO3713-7G 1
System connector module to extend the basic unit for SIMATIC S7-300 controls for the simple connection of process models withouthaving to carry out extensive wiring of the individual lines.
1 37-pin sub-D male connector (input signals)
1 37 pin sub-D socket (output signals)
Dimens ions: 125 x 65 x 25mm (HxWxD)
74 Set of connection cables for PLC system connector SO5145-5B 1
For the connection of PLC process m odels or s imulations to the PLCsystem connector, consisting of: 2 x connection cable Sub-D 37 pole2 x safety protected connection plug, red 1 x safety protected
connection plug, blue
Supplementary equipment set to the basic equipment set CLC 30:
Supplementary equipment set to the basic equipment set CLC 30:
Accessories:
Lucas Nlle GmbH Page 50/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
51/122
Pos. Product name Bestell-Nr. Anz.
75 IMS connector card 25-pin SO3713-7Y 1
Universal adapter for connecting experiment stations with differentconnectors. With clamp for attaching to terminal rails and with thefollowing connectors:
25-pin D-Sub connector
25-pin terminal strip
25 x 4mm experiment sockets
76 IMS connector card 9-pin SO3713-7Z 1
Universal adapter for connecting experiment stations with differentconnectors. With clamp for attaching to terminal rails and with thefollowing connectors:
9-pin D-Sub connector
9-pin terminal strip
9 x 4mm experiment sockets
Optional accessories for conventional integration of PLC system models
Operating and Monitoring
Operating and Monitoring
Continuously simplifying the ever more complex is our motto. Processes are becoming multilayered, thedemands made on machine and system functionality are becoming greater. Today, what the machine operatorhas to know and see is vast. For that reason the Human Machine Interface (HMI) has to provide him with the
optimum transparency. A whole new technology has emerged in the automated world of production; atechnology which is gaining in significance. Operating and monitoring are essential in mastering a process andtranslate into both availability and productivity. The operating and monitoring training system gives the student anopportunity to gain insight into HMI technology. But advanced users are also able to profit from the simple textdisplay provided by the Operator Panel and to train aspects of technology reaching all the way to PC-based HMIsoftware.
Lucas Nlle GmbH Page 51/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
52/122
CAS 1 AS interface
CAS 1 AS interface
The actuator-sensor interface (AS interface) is an open networking system, s tandardised according to IEC62026and EN 50295 for the lowest fieldbus level and supported by more than 100 manufacturers. One essentialcharacteristic of the AS interface is the use of a common two-wire bus for data transfer and the distribution ofauxiliary power to sensors and actuators. For this purpose, an AS power supply must be used that can fulfil therequirements for the transfer mode of the AS interface. In order to connect the devices a mechanically codedAS-interface profiled cable is used that is proof against reversal of polarity. By means of insulation displacementconnection technology any device may be connected without any need for insulation stripping tools. The ASinterface is used where individual actuators and sensors are distributed over a wide area of a machine or plantand a direct fieldbus connection has hitherto been impossible to implement either for technical reasons or forreasons of cost. It can do away with the need for the complex wiring of control cables and distributor panels.Service and maintenance requirements are also considerably reduced. Due to such possibilities for savings and
its simple installation and commissioning, the actuator-sensor interface has already become a widely usedstandard in automatation technology. The modular AS interface training system contains a representative andeconomical select ion of AS-i devices. Industrial components are used exclusively and the devices are connectedin many cases using the original AS-interface profiled cable in order to advance the students' familiarity with theequipment and convey the necessary practical skills for its use. The course concentrates on the followingtopics: Connecting and installing AS interface devices Addressing AS interface devices and incorporating theminto the bus structure Developing and analysing application programmes Design programming and analysis ofcontrol ci rcuits Use of the AS-interface addressing and diagnostic equipment
Lucas Nlle GmbH Page 52/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
53/122
Pos. Product name Bestell-Nr. Anz.
77 CP343-2 P communications processor for connecting S7-300 toAS interface
SO3713-5K 1
The CP 343-2 P is the AS-interface master for the SIMATIC S7-300programm able logic controller and the ET200M decentralizedperipheral device. The module i s capable o f the following functions:
Up to 62 AS-interface slaves may be connected and analogtransmis sion according to enhanced AS-interfacespecification version 2.1 is integrated
Supports all AS-interface mas ter functions according toenhanced AS-interface specification version 2.1
Error displays such AS-interface voltage error, configurationerror,etc. are indicated by LEDs on the front panel
Supports projection of the AS-interface network using STEP 7as of version 5.2
Dimens ions: 40 x 80 x 110mm (HxWxD)
Weight: 0.2kg
78 AS-i power supply CO3715-5A 1
AS-interface power supply with data iso lation
30V DC regulated output voltage
2.4A output current
AS-interface voltage tapped via two coupl ing modules wi thindus trial AS-interface profiled cables and parallel 4mmsafety sockets
Dimens ions: 297 x 228 x 160mm (HxWxD)
Weight: 1.5kg
79 AS-i slave 4DI/ 4DO with simulation switch CO3715-5F 1
4 digital inputs
4 digital outputs
Safety sockets for connection of inputs and outputs
4 simulation switches for the simulation of input signals
Dimens ions: 297 x 228 x 160mm (HxWxD)
Weight: 1,5kg
Supplementary equipment set to the basic equipment set CLC 30:
Supplementary equipment set to the basic equipment set CLC 30:
As an alternative to the communication processor (SO3713-5K) a PROFIBUS DP/AS interface link (SO3715-4R)may also be used as the AS-interface master. This requires a higher level PLC with the PROFIBUS DP masterinterface (SO3713-2K or SO3713-2L).
Lucas Nlle GmbH Page 53/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
54/122
80 AS-interface control and signalling unit SO3715-5K 1
Encapsulated with three pushbuttons for direct connection to AS-interface.
2 x illuminated pushbuttons, green
1 x pushbutton, red
Dimens ions: 80 x 170 x 70mm (HxWxD)
Weight: 0.4kg
81 Safety overload unit with working motor CO3715-7L 1
Load relay for safety applications with motor for cons tructing s afetycircuits of categories SIL1 to SIL3, containing the followingcomponents:
2 safety contactors with positive action contacts
Individually controllable safety contactors
Motor with speed ind icator
Control voltage 24 V DC
Dimens ions: 297 x 228 x 130 mm (HxWxD)
Weight: 1.5 kg
Lucas Nlle GmbH Page 54/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
55/122
82 AS-i indicator column CO3715-5M 1
For displaying process s tatus of automated systems . The indicatorcolumn is directly connected to the AS interface via an adapter.
Indicator light, red
Indicator light, yellow
Indicator light, green
Dimens ions: 297 x 114 x 170mm (HxWxD)
Weight: 0.5kg
83 AS-Interface Slave 4DI/4DO for IMS LM9650 1
AS-interface field bus m odule allowing optional reconfiguration ofIMS conveyor belts
AS-interface s lave with 4 inputs and 4 outputs
4 x M12 connectors
D-SUB 9- pin connectors for connection to conveyor belts
D-SUB 25-pin connectors for connection to IMS stations
Adapter for connection to AS-i ribbon cables
Lucas Nlle GmbH Page 55/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
56/122
84 Double conveyor belt segment, 24V motor LM9606 1
Basic mechatronics module driven by a variable speed 24-V gearedmotor and complete with end-limit sensors and integratedPROFIBUS DP slave. Designed for basic experiments on a conveyorsystem or for incorporation into a complex mechatronics system for
controlling the flow of materials. The conveyor belt conveys workpieces on carriers and can be us ed to link individual sub-systems. Itis designed for connection to a PLC control system. It can becombined with other conveyor belts, curve units or transferjunctions. IMS stations can be connected directly to the belt andjointly controlled via PROFIBUS.
Length = 600 mm, width = 160 mm, belt width = 120 mm
Geared motor, 24 V DC
Pulse wid th modulation s ystem for controlling belt at variousspeeds
Continuous speed adjustment via potentiometer or analogueinput, 0-10 V
Manual switches for movement to left or right
2 inductive end-limit sensors
2 x M12 interfaces for additional actuators/sensors
Sockets for emergency shut-off circuit (disconnection o f allvoltage to output modules )
External power s upply via 4-mm safety sockets or co-axialpower connector
9-pin SUB-D connector for contactors, LOGO! or PLC
Incremental encoder disc for detecting position and speed viaoptical sensors
Visualis ation as interactive 3D model in IMS-virtual database
Control requirements: 4 x digital inputs, 3 x digital outputs
PROFIBUS DP slave modu le:
Address range: 16 digital input/outputs
PROFIBUS DP connector: 9-pin DSUB socket
Rotary switch for setting address
Transmis sion rates of up to 6 Mbits/s
GSD file for use with control software (e.g.: STEP7)
25-pin DSUB s ocket for connecting IMS station
Output current: 500 mA (total curren t: 1 A)
Variable speed control of conveyor belt via PROFIBUS
85 Serial interface cable 9/9 pole LM9040 1
9-pin SUB-D cable
Length: 2m
Connector: 9-pin plug/9-pin socket
Pin assignment: 1:1
Lucas Nlle GmbH Page 56/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
57/122
Pos. Product name Bestell-Nr. Anz.
86 Profiled cable for AS-Interface (yellow), per metre LM9190 5
87 Profiled cable for AS-Interface, 24 V DC (black), per metre LM9191 2
88 AS-interface addressing and diagnostic equipment LM8150 1
For offline address ing of devices on an AS-interface network.
Read-out of slave address es 0 to 31 A/B
Read-out of slave IO and ID codes
Standard and enhanced ID codes 1 and 2
Standard and enhanced addres sing m ode according to AS-interface version 2.1
Programming of ID code 1
Function testing of slaves: read-out of inputs and writing tooutputs of digital or analog s laves
AS-interface tes t: measurement of voltage and currentconsum ption on and AS-interface bus
Storage of complete systemconfigurations
Identification of all system devices
Dimens ions: 85 x 195 x 45mm (HxWxD)
Weight: 0,4kg
89 Set of safety measurement cables, 4mm (30 leads) SO5148-2H 1
Set of safety measurement cables 4mm (30pcs)
4 x 50cm length, black
8 x 100cm length, black
4 x 50cm length, yellow
8 x 100cm length, yellow
2 x 100cm length, red
2 x 100cm length, blue
1 x 100cm length, green/yellow
1 x 150cm length, green/yellow
Accessories:
Lucas Nlle GmbH Page 57/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
58/122
CBS 1 Industrial bus systems
CBS 1 Industrial bus systems
It is vital to know about the most important industrial bus systems. With this compact set, you can learn aboutproject planning for three different bus systems and how they are used. It is not only the extensive theoreticalbackground but also the detailed experiment instructions which offer a thorough exploration of these bussystems.
You will start with direct communication via the I/O of a PLC system. A conveyor belt will then be connected toan AS-i bus to provide an introduction to bus systems in general. The bus system which is most widely used inindustry, PROFIBUS, is dealt with second, while the concluding section is formed by a conveyor belt controlsys tem implemented in PROFINET.
This means that a single system is controlled via four different means of communication.
Lucas Nlle GmbH Page 58/122 www.lucas-nuelle.com
-
8/21/2019 3332 E Automation Technology With Siemens PLC
59/122
Pos. Product name Bestell-Nr. Anz.
90 Double conveyor belt segment, 24V motor LM9606 1
Basic mechatronics module driven by a variable speed 24-V gearedmotor and complete with end-limit sensors and integratedPROFIBUS DP slave. Designed for basic experiments on a conveyorsystem or for incorporation into a complex mechatronics system forcontrolling the flow of materials. The conveyor belt conveys workpieces on carriers and can be us ed to link individual sub-systems. Itis designed for connection to a PLC control system. It can becombined with other conveyor belts, curve units or transferjunctions. IMS stations can be connected directly to the belt andjointly controlled via PROFIBUS.
Length = 600 mm, width = 160 mm, belt width = 120 mm
Geared motor, 24 V DC
Pulse wid th modulation s ystem for controlling belt at variousspeeds
Continuous speed adjustment via potentiometer or analogueinput, 0-10 V
Manual switches for movement to left or right
2 inductive end-limit sensors
2 x M12 interfaces for additional actuators/sensors
Sockets for emergency shut-off circuit (disconnection o f allvoltage to output modules )
External power s upply via 4-mm safety sockets or co-axialpower connector
9-pin SUB-D connector for contactors, LOGO! or PLC
Incremental encoder disc for detecting position and speed viaoptical sensors
Visualis ation as interactive 3D model in IMS-virtual database
Control requirements: 4 x digital inputs, 3 x digital outputs
PROFIBUS DP slave modu le:
Address range: 16 digital input/outputs
PROFIBUS DP connector: 9-pin DSUB socket
Rotary switch for setting address
Transmis sion rates of up to 6 Mbits/s
GSD file for use with control software (e.g.: STEP7)
25-pin DSUB s ocket for connecting IMS station
Output current: 500 mA (total curr