40820-instruction sheet · for technical support call: 800-343-7486 monday - friday 8:00 a.m. to...
TRANSCRIPT
![Page 1: 40820-Instruction Sheet · For TECHNICAL SUPPORT Call: 800-343-7486 Monday - Friday 8:00 A.M. to 4:30 P.M. (PST) 40820/40823 VAN 2 BAR LADDER RACK Assembly Instructions For:](https://reader030.vdocuments.net/reader030/viewer/2022041122/5d0c434f88c993fc4e8b7534/html5/thumbnails/1.jpg)
For TECHNICAL SUPPORT Call: 800-343-7486 Monday - Friday 8:00 A.M. to 4:30 P.M. (PST)
40820/40823VAN 2 BAR LADDER RACK
Assembly Instructions For:
![Page 2: 40820-Instruction Sheet · For TECHNICAL SUPPORT Call: 800-343-7486 Monday - Friday 8:00 A.M. to 4:30 P.M. (PST) 40820/40823 VAN 2 BAR LADDER RACK Assembly Instructions For:](https://reader030.vdocuments.net/reader030/viewer/2022041122/5d0c434f88c993fc4e8b7534/html5/thumbnails/2.jpg)
40820Van 2 Bar Ladder Rack
2
2
2
2
4
Hardware(c)
5/16"Flat Washer
4 each
(d)5/16" x 1 1/4"Carriage Bolt
4 each
(e)3/8" x 3/8"Set Screw
2 each
(f)5/16"
Nylock Hex Nut4 each
(g)1/2" x 1"
Flat Head Allen Bolt4 each
Qty
Qty
Qty
Qty
Optional: 40850Ratchet Strap Sold SeperatelyKit Consists of (2 Per)
Qty
![Page 3: 40820-Instruction Sheet · For TECHNICAL SUPPORT Call: 800-343-7486 Monday - Friday 8:00 A.M. to 4:30 P.M. (PST) 40820/40823 VAN 2 BAR LADDER RACK Assembly Instructions For:](https://reader030.vdocuments.net/reader030/viewer/2022041122/5d0c434f88c993fc4e8b7534/html5/thumbnails/3.jpg)
(-02) (-02) (-02)
Align Holes
Gutter Clamp(-02)
Hole End
(g)
Upright (-01)
Gutter Clamp(-02)
(d)
(c)
(f)
Telescope Tube(-04)
Cross Tube(-03)
(e) Upright(-05)
STEP 1:Attach uprights (-01) to telescope tube (-04) and uprights (-05) to cross tube (-03) using allen head bolt (g). Now insert telescope tube (-04) assembly into cross tube (-03).
Upright(-05)
Upright(-01)
STEP 2:Set rack assembly in place on the van gutter and even up. Insert set screw (e) in cross tube (-03) and snug tighten. Now slip the gutter clamp (-02) (hole end) through the lower window of the upright and rotate through the top window of the upright to align the holes as shown in DETAIL 1C.
STEP 3:Insert gutter clamp bolts (d) flat washers (c) and nylock nuts (f). Snug all bolts. DO NOT OVER TIGHTEN.
DETAIL 1C
For TECHNICAL SUPPORT Call: 800-343-7486 Monday - Friday 8:00 A.M. to 4:30 P.M. (PST)