5 port mechanical valves series evzm/evfm...
TRANSCRIPT
5 Port Mechanical Valve Series EVZM/EVFM
Valv
es
Page 353PDF AVAILABLE ONLINESEE BEST PNEUMATICS VOL.5CAD CD-ROM AVAILABLE
5 Port Mechanical Valves
Series EVZM/EVFM (VZM/VFM)*
4 Series of valves.
Metal and rubber seal types.
1/8 and 1/4 ported sizes.
Wide choice of replaceable operating heads.
Features
How to Order
Specifications
Basic00Roller lever01
One Way Roller Lever02Straight plunger05Roller plunger06Toggle lever08
Push button (Mushroom)30Push button (Extended)32
Push button (Flush)33Twist selector (2 position)34Key selector (2 position)Push pull (VZM550 only)
3637
Actuator typePort size
BlackGB
RedHard steel roller
Color of push botton
selector
RS
GreenY Yellow
Suffix for actuator
G F01 1 8
S01F010VZM45
G F02 1 4
(See detail pagesfor applicability)
EVZM400 Series (1/8)EVZM500 Series (1/8)EVFM300 Series (1/4)EVFM200 Series (1/4)
VZM45Valve type
VZM55VFM25VFM35
E G ThreadsPort type
(Not shown on detailpages)
E
–5 to 60°C (No freezing)
Not required (Use turbine oil class 1 ISO VG32, if lubricated.)Main valve
Air/Inert gas0.15 to 1.0 MPa (1)
9.9 mm2
Pilot valve (EXH)/M5150 gMetal
300 c.p.m. or less
1 8
Note 1) External pilot type Main valve: 0 to 1.0 MPa, Pilot valve: 0.15 to 1.0 MPaNote 2) The standard body can not be retrofitted with a foot bracket.
Series EVZM400
–5 to 60°C (No freezing)
Not required (Use turbine oil Class 1 ISO VG32, if lubricated.)Main valve
Air/Inert gas0.15 to 0.7 MPa (1)
10.8 mm2
Pilot valve (EXH)/M5130 gRubber
300 c.p.m. or less
1 8
Series EVZM500
–5 to 60°C (No freezing)
Not required (Use turbine oil Class 1 ISO VG32, if lubricated.)Main valve/SUP, CYL port , EXH port
Air/Inert gas0.15 to 0.9 MPa (1)
18 mm2
Pilot valve (EXH)/M5260 gRubber
300 c.p.m. or less
1 4 1 8
Ambient and fluid temperatureEffective area
Lubrication
–5 to 60°C (No freezing)
Not required (Use turbine oil Class 1 ISO VG32, if lubricated.)Main valve
Fluid Air/Inert gasOperating pressure 0.1 to 1.0 MPa (1)
18 mm2
Port sizePilot valve (EXH)/M5
Weight (Basic)Spool sealing
300 gMetal
Maximum frequency (Mechanical operation type) 300 c.p.m. or less
1 4
Series EVZM200 Series EVZM300
Ambient and fluid temperatureEffective area
Lubrication
FluidOperating pressure
Port size
Weight (Basic)Spool sealing
Maximum frequency (Mechanical operation type)
*The variant used in Europe is the EVZM/EVFM type which has parallel port threads.The VZM/VFM type used elesewhere in the world may also be found. These are identical except for the Rc (taper) port threads.
Series EVZM/EVFM 5 Port Mechanical Valve
Valves
Page 354
Symbol
3.0 mmT.T.2.0 mmO.T.1.0 mmP.T.
Accessory mounting hole
2-3.5 mounting hole
(Pilot exhaust port)
Dimensions: EVZM400
How to order EVZM and EVFM Mechanical valvesFor best delivery times, please order the parts highlighted bold in the following pages. The operating heads are supplied with screws for easy fixing to the base valves. Pre-assembled valves and operating heads are also available where shown but may be subject to extended delivery times. Some variants, for example roller lever, are only available as pre-assembled units
BasicBase valve Operating head (Pre-Assembled unit) NoteEVZM450-F01-00 N/A N/A 5 port
Roller leverBase valve Operating head Pre-Assembled unit NoteN/A N/A EVZM450-F01-01 5 portN/A N/A EVZM450-F01-01S 5 port steel roller
Symbol
6.2 mmT.T. 4.0 mmO.T. 2.2 mmP.T.
ø14 polyacetal or head steel roller
2-3.5 mounting hole
(Pilot exhaust port)
Replacement actuator head: VM-01C, VM-01CS
5 Port Mechanical Valve Series EVZM/EVFM
Valv
es
Page 355PDF AVAILABLE ONLINESEE BEST PNEUMATICS VOL.5CAD CD-ROM AVAILABLE
Dimensions: EVZM400
One way roller leverBase valve Operating head Pre-Assembled unit NoteN/A N/A EVZM450-F01-02 5 portN/A N/A EVZM450-F01-02S 5 port steel roller
Symbol
7.0 mmT.T. 4.6 mmO.T. 2.4 mmP.T.
ø14 polyacetal or head steel roller
(Pilot exhaust port)
2-3.5 mounting hole
Replacement actuator head: VM-02C, VM-02CS
Straight PlungerBase valve Operating head (Pre-Assembled unit) NoteEVZM450-F01-00 VM-05C EVZM450-F01-05 5 port
Symbol
3.5 mmT.T.2.0 mmO.T.1.5 mmP.T.
Hexagon nut thick 8, across flats 22
(Pilot exhaust port)
2-3.5mounting hole
Panel mounting hole
3.5 mmT.T.2.0 mmO.T.1.5 mmP.T.
ø12 polyacetal or hard steel roller
2-3.5mounting hole
Hexagon nut thick 8, across flats 22
(Pilot exhaust port)
Symbol
Panel mounting holeReplacement actuator head: VM-06C, VM-06CS
Roller PlungerBase valve Operating head (Pre-Assembled unit) NoteEVZM450-F01-00 VM-06C EVZM450-F01-06 5 portEVZM450-F01-00 VM-06CS EVZM450-F01-06S 5 port steel roller
Series EVZM/EVFM 5 Port Mechanical Valve
Valves
Page 356
Dimensions: EVZM400
T.T.
40°T.T.2-3.5mounting hole
Hexagon nut thick 5, across flats 17
(Pilot exhaust port)Symbol
Panel mounting holeReplacement actuator head: VM-08C
Symbol
6.5 mmT.T.1.7 mmO.T.4.8 mmP.T.
(Pilot exhaust port)
2-3.5mounting hole
Panel mounting holeReplacement actuator head: VM-30C*
Toggle LeverBase valve Operating head (Pre-Assembled unit) NoteEVZM450-F01-00 VM-08C EVZM450-F01-08 5 port
Push button (mushroom)Base valve Operating head (Pre-Assembled unit) NoteEVZM450-F01-00 VM-30C ��� EVZM450-F01-30 5 port
= Specify colour (R/B/G/Y)
Push button (extended)Base valve Operating head (Pre-Assembled unit) NoteEVZM450-F01-00 VM-32C ��� EVZM450-F01-32 5 port
= Specify colour (R/B/G/Y)
6.5 mmT.T.1.7 mmO.T.4.8 mmP.T.
2-3.5 mounting hole
(Pilot exhaust port)Symbol
Panel mounting holeReplacement actuator head: VM-32C*
5 Port Mechanical Valve Series EVZM/EVFM
Valv
es
Page 357PDF AVAILABLE ONLINESEE BEST PNEUMATICS VOL.5CAD CD-ROM AVAILABLE
Dimensions: EVZM400Push Button (flush)Base valve Operating head (Pre-Assembled unit) NoteEVZM450-F01-00 VM-33C EVZM450-F01-33 5 port
6.5 mmT.T.1.7 mmO.T.4.8 mmP.T.
2-3.5mounting hole
(Pilot exhaust port)Symbol
Panel mounting holeReplacement actuator head: VM-33C
Symbol
90°T.T.
(Pilot exhaust port)
2-3.5 mounting hole
Panel mounting holeReplacement actuator head: VM-34C*
Twist selector (2 position)Base valve Operating head (Pre-Assembled unit) NoteEVZM450-F01-00 VM-34C ��� EVZM450-F01-34 5 port
= Specify colour (R/B/G/Y)
Key can be removed at the “on” and “off” positions.
90°T.T.
(Pilot exhaust port)
2-3.5 mounting hole
Symbol
Panel mounting holeReplacement actuator head: VM-36C
Key Selector (2 position)Base valve Operating head (Pre-Assembled unit) NoteEVZM450-F01-00 VM-36C EVZM450-F01-36 5 port
Series EVZM/EVFM 5 Port Mechanical Valve
Valves
Page 358
Dimensions: EVZM500
How to order EVZM and EVFM Mechanical valvesFor best delivery times, please order the parts highlighted bold in the following pages. The operating heads are supplied with screws for easy fixing to the base valves. Pre-assembled valves and operating heads are also available where shown but may be subject to extended delivery times. Some variants, for example roller lever, are only available as pre-assembled units
BasicBase valve Operating head (Pre-Assembled unit) NoteEVZM550-F01-00 N/A N/A 5 port
Symbol
3.0 mmT.T.2.0 mmO.T.1.0 mmP.T.
Accessory mounting hole
(Pilot exhaust port)
2-3.2mounting hole
Symbol
6.2 mmT.T.4.0 mmO.T.2.2 mmP.T.2-3.2
mounting hole
(Polyacetal or hard steel roller)
(Pilot exhaust port)
Replacement actuator head: VM-01C,VM-01CS
Roller leverBase valve Operating head Pre-Assembled unit NoteN/A N/A EVZM550-F01-01 5 portN/A N/A EVZM550-F01-01S 5 port steel roller
5 Port Mechanical Valve Series EVZM/EVFM
Valv
es
Page 359PDF AVAILABLE ONLINESEE BEST PNEUMATICS VOL.5CAD CD-ROM AVAILABLE
Dimensions: EVZM500
Symbol
7.0 mmT.T.4.6 mmO.T.2.4 mmP.T.
(Polyacetal or hard steel roller)
(Pilot exhaust port)
2-3.2mounting hole
Replacement actuator head: VM-02C,VM-02CS
One way roller leverBase valve Operating head Pre-Assembled unit NoteN/A N/A EVZM550-F01-02 5 portN/A N/A EVZM550-F01-02S 5 port steel roller
Straight PlungerBase valve Operating head (Pre-Assembled unit) NoteEVZM550-F01-00 VM-05C EVZM550-F01-05 5 port
Symbol
3.5 mmT.T.
2.0 mmO.T.1.5 mmP.T.
2-3.2mounting hole
Hexagon nut thick 8, across flats 22
(Pilot exhaust port)
Panel mounting holeReplacement actuator head: VM-05C
Symbol
3.5 mmT.T.2.0 mmO.T.1.5 mmP.T.
Hexagon nut thick 8, across flats 22
(Pilot exhaust port)
2-3.2 mounting hole
ø12 (Polyacetal or hard steel roller)Panel mounting hole
Replacement actuator head:VM-06C,VM-06CS
Roller PlungerBase valve Operating head (Pre-Assembled unit) NoteEVZM550-F01-00 VM-06C EVZM550-F01-06 5 portEVZM550-F01-00 VM-06CS EVZM550-F01-06S 5 port steel roller
Series EVZM/EVFM 5 Port Mechanical Valve
Valves
Page 360
Dimensions: EVZM500
Symbol
40°T.T.2-3.2mounting hole
T.T. (Total Travel) 40°
Hexagon nut thick 5, across flats 17
(Pilot exhaust port)
Panel mounting holeReplacement actuator head: VM-08C
Toggle LeverBase valve Operating head (Pre-Assembled unit) NoteEVZM550-F01-00 VM-08C EVZM550-F01-08 5 port
Push button (mushroom)Base valve Operating head (Pre-Assembled unit) NoteEVZM550-F01-00 VM-30C ��� EVZM550-F01-30 5 port
= Specify colour (R/B/G/Y)Replacement actuator head: VM-30C*
Symbol
6.5 mmT.T.1.7 mmO.T.4.8 mmP.T.
2-3.2mounting hole
(Pilot exhaust port)
Panel mounting hole
Symbol
6.5 mmT.T.1.7 mmO.T.4.8 mmP.T.
(Pilot exhaust port)
2-3.2mounting hole
Panel mounting holeReplacement actuator head: VM-32C*
Push button (extended)Base valve Operating head (Pre-Assembled unit) NoteEVZM550-F01-00 VM-32C ��� EVZM550-F01-32 5 port
= Specify colour (R/B/G/Y)
5 Port Mechanical Valve Series EVZM/EVFM
Valv
es
Page 361PDF AVAILABLE ONLINESEE BEST PNEUMATICS VOL.5CAD CD-ROM AVAILABLE
Dimensions: EVZM500
Push Button (flush)Base valve Operating head (Pre-Assembled unit) NoteEVZM550-F01-00 VM-33C EVZM550-F01-33 5 port
Symbol
6.5 mmT.T.1.7 mmO.T.4.8 mmP.T.2-3.2
mounting hole
(Pilot exhaust port)
Panel mounting holeReplacement actuator head: VM-33C
Note: Supplied with 4 colour caps.
Twist selector (2 position)Base valve Operating head (Pre-Assembled unit) NoteEVZM550-F01-00 VM-34C ��� EVZM550-F01-34 5 port
= Specify colour (R/B/G/Y)
Symbol
90°T.T.
2-3.2mounting hole
(Pilot exhaust port)
Panel mounting holeReplacement actuator head: VM-34C*
90°T.T.
Symbol
Key can be removed at the “on” and “off” positions.
(Pilot exhaust port)
2-3.2mounting hole
Panel mounting holeReplacement actuator head: VM-36C
Key Selector (2 position)Base valve Operating head (Pre-Assembled unit) NoteEVZM550-F01-00 VM-36C EVZM550-F01-36 5 port
Series EVZM/EVFM 5 Port Mechanical Valve
Valves
Page 362
Dimensions: EVZM500Push-pull
Base valve Operating head Pre-Assembled unit NoteN/A N/A EVZM550-F01-37 5 port
Symbol
2.7 mmT.T.
2-3.2mounting hole
Position indicator
Stro
ke 2
.7
Hexagon nut thick 5,across flats 17
Panel mounting hole
5 Port Mechanical Valve Series EVZM/EVFM
Valv
es
Page 363PDF AVAILABLE ONLINESEE BEST PNEUMATICS VOL.5CAD CD-ROM AVAILABLE
Dimensions: EVFM300
How to order EVZM and EVFM Mechanical valvesFor best delivery times, please order the parts highlighted bold in the following pages. The operating heads are supplied with screws for easy fixing to the base valves. Pre-assembled valves and operating heads are also available where shown but may be subject to extended delivery times. Some variants, for example roller lever, are only available as pre-assembled units
BasicBase valve Operating head (Pre-Assembled unit) NoteEVFM350-F02-00 N/A N/A 5 port
Symbol
3.0 mmT.T.2.0 mmO.T.1.0 mmP.T.
Accessory mounting hole
(Pilot exhaust port)
(SUP CYL port)
2-4.2mounting hole
(EXH port)
Symbol
6.2 mmT.T.4.0 mmO.T.2.2 mmP.T.
(SUP CYL port)
2-4.2mounting hole(EXH port)
(Pilot exhaust port)
ø14 polyacetal or head steel rollerReplacement actuator head: VM-01C,VM-01CS
Roller leverBase valve Operating head (Pre-Assembled unit) NoteEVFM350-F02-00 VM-01C EVFM350-F02-01 5 portEVFM350-F02-00 VM-01CS EVFM350-F02-01S 5 port steel roller
Series EVZM/EVFM 5 Port Mechanical Valve
Valves
Page 364
Symbol
(SUP CYL port)
ø15 polyacetal or head steel roller
Hexagon nut thick 11, acoss flats 27
(Pilot exhaust port)
(EXH port)2-4.2
mounting hole
Panel mounting holeReplacement actuator head: VM-06D,VM-06DS
Symbol
(SUP CYL port)2-4.2
mounting hole
Hexagon nut thick 11,acoss flats 27
(Pilot exhaust port)
(EXH port)
Panel mounting holeReplacement actuator head: VM-05D
Symbolø14 polyacetal or head steel roller
(Pilot exhaust port)
(SUP CYL port)
2-4.2mounting hole
(EXH port)
Replacement actuator head: VM-02C,VM-02CS
Dimensions: EVFM300
One way roller leverBase valve Operating head (Pre-Assembled unit) NoteEVFM350-F02-00 VM-02C EVFM350-F02-02 5 portEVFM350-F02-00 VM-02CS EVFM350-F02-02S 5 port steel roller
7.0 mmT.T.4.6 mmO.T.2.4 mmP.T.
3.5 mmT.T.2.0 mmO.T.1.5 mmP.T.
Straight PlungerBase valve Operating head (Pre-Assembled unit) NoteEVFM350-F02-00 VM-05D EVFM350-F02-05 5 port
3.5 mmT.T.2.0 mmO.T.1.5 mmP.T.
Roller PlungerBase valve Operating head (Pre-Assembled unit) NoteEVFM350-F02-00 VM-06D EVFM350-F02-06 5 portEVFM350-F02-00 VM-06DS EVFM350-F02-06S 5 port steel roller
5 Port Mechanical Valve Series EVZM/EVFM
Valv
es
Page 365PDF AVAILABLE ONLINESEE BEST PNEUMATICS VOL.5CAD CD-ROM AVAILABLE
Symbol
(SUP CYL port)2-4.2
mounting hole
(EXH port)
(Pilot exhaust port)
Panel mounting hole
Symbol
(SUP CYL port)
2-4.2mounting hole
(Pilot exhaust port)
(EXH port)
Panel mounting hole
Dimensions: EVFM300
Symbol
40°T.T.
(SUP CYL port)2-4.2mounting hole(EXH port)
(Pilot exhaust port)
Hexagon nut thick 5.5,across flats 24
T.T. (Total Travel) 40°
Panel mounting hole
Replacement actuator head: VM-08D
Toggle LeverBase valve Operating head (Pre-Assembled unit) NoteEVFM350-F02-00 VM-08D EVFM350-F02-08 5 port
Replacement actuator head:VM-34C*
Key can be removed at the “on” and “off” positions.
90°T.T.
90°T.T.
Replacement actuator head:VM-36C
Twist selector (2 position)Base valve Operating head (Pre-Assembled unit) NoteEVFM350-F02-00 VM-34C��� EVFM350-F02-34 5 port
= Specify colour (R/B/G/Y)
Key Selector (2 position)Base valve Operating head (Pre-Assembled unit) NoteEVFM350-F02-00 VM-36C EVFM350-F02-36 5 port
Series EVZM/EVFM 5 Port Mechanical Valve
Valves
Page 366
Dimensions: EVFM200
How to order EVZM and EVFM Mechanical valvesFor best delivery times, please order the parts highlighted bold in the following pages. The operating heads are supplied with screws for easy fixing to the base valves. Pre-assembled valves and operating heads are also available where shown but may be subject to extended delivery times. Some variants, for example roller lever, are only available as pre-assembled units
Symbol
3.0 mmT.T.2.0 mmO.T.1.0 mmP.T.
Accessory mounting hole
3-4.5 mounting hole
(Pilot exhaust port)
BasicBase valve Operating head (Pre-Assembled unit) NoteEVFM250-F02-00 N/A N/A 5 port
Roller leverBase valve Operating head (Pre-Assembled unit) NoteEVFM250-F02-00 VM-01C EVFM250-F02-01 5 portEVFM250-F02-00 VM-01CS EVFM250-F02-01S 5 port steel roller
Symbol
6.2 mmT.T. 4.0 mmO.T. 2.2 mmP.T.
ø14 polyacetal or head steel roller
(Pilot exhaust port)
3-4.5 mounting hole
Replacement actuator head: VM-01C, VM-01CS
5 Port Mechanical Valve Series EVZM/EVFM
Valv
es
Page 367PDF AVAILABLE ONLINESEE BEST PNEUMATICS VOL.5CAD CD-ROM AVAILABLE
Symbol
ø15 polyacetal or head steel roller
Hexagon nut thick 11, across flats 27
(Pilot exhaust port)
3-4.5 mounting hole
Panel mounting holeReplacement actuator head: VM-06D,VM-06DS
Symbol
Hexagon nut thick 11, across flats 27
(Pilot exhaust port)
3-4.5 mounting hole
Panel mounting hole
Symbol
ø14 polyacetal or head steel roller
(Pilot exhaust port)
3-4.5 mounting hole
Dimensions: EVFM200
One way roller leverBase valve Operating head (Pre-Assembled unit) NoteEVFM250-F02-00 VM-02C EVFM250-F02-02 5 portEVFM250-F02-00 VM-02CS EVFM250-F02-02S 5 port steel roller
Straight PlungerBase valve Operating head (Pre-Assembled unit) NoteEVFM250-F02-00 VM-05D EVFM250-F02-05 5 port
Roller PlungerBase valve Operating head (Pre-Assembled unit) NoteEVFM250-F02-00 VM-06D EVFM250-F02-06 5 portEVFM250-F02-00 VM-06DS EVFM250-F02-06S 5 port steel roller
7.0 mmT.T. 4.6 mmO.T. 2.4 mmP.T.
Replacement actuator head:VM-02C, VM-02CS
Replacement actuator head:VM-05D
3.5 mmT.T. 2.0 mmO.T. 1.5 mmP.T.
3.5 mmT.T. 2.0 mmO.T. 1.5 mmP.T.
Series EVZM/EVFM 5 Port Mechanical Valve
Valves
Page 368
Replacement actuator head:VM-30C*
Symbol
6.5 mmT.T.1.7 mmO.T.4.8 mmP.T.
(Pilot exhaust port)
3-4.5mounting hole
Panel mounting hole
Symbol
T.T. (Total Travel) 40°
Hexagon nut thick 11, across flats 27
(Pilot exhaust port)
3-4.5mounting hole
Panel mounting holeReplacement actuator head: VM-08D,VM-08DS
Dimensions: EVFM200
40°T.T.
Toggle LeverBase valve Operating head (Pre-Assembled unit) NoteEVFM250-F02-00 VM-08D EVFM250-F02-08 5 port
Push button (mushroom)Base valve Operating head (Pre-Assembled unit) NoteEVFM250-F02-00 VM-30C ��� EVFM250-F02-30 5 port
= Specify colour (R/B/G/Y)
Push button (extended)Base valve Operating head (Pre-Assembled unit) NoteEVFM250-F02-00 VM-32C ��� EVFM250-F02-32 5 port
= Specify colour (R/B/G/Y)
Symbol
6.5 mmT.T.1.7 mmO.T.4.8 mmP.T.
(Pilot exhaust port)
3-4.5mounting hole
Panel mounting holeReplacement actuator head:VM-32C*
5 Port Mechanical Valve Series EVZM/EVFM
Valv
es
Page 369PDF AVAILABLE ONLINESEE BEST PNEUMATICS VOL.5CAD CD-ROM AVAILABLE
Replacement actuator head:VM-34C*
Symbol
90°T.T.
(Pilot exhaust port)
3-4.5mounting hole
Panel mounting hole
Dimensions: EVFM200
Symbol
6.5 mmT.T.1.7 mmO.T.4.8 mmP.T.
(Pilot exhaust port)
3-4.5mounting hole
Panel mounting hole
Replacement actuator head:VM-33C
Push Button (flush)Base valve Operating head (Pre-Assembled unit) NoteEVFM250-F02-00 VM-33C EVFM250-F02-33 5 port
Twist selector (2 position)Base valve Operating head (Pre-Assembled unit) NoteEVFM250-F02-00 VM-34C��� EVFM250-F02-34 5 port
= Specify colour (R/B/G/Y)
Key Selector (2 position)Base valve Operating head (Pre-Assembled unit) NoteEVFM250-F02-00 VM-36C EVFM250-F02-36 5 port
Symbol
Key can be removed at the “on” and “off” positions.
90°T.T.
(Pilot exhaust port)
3-4.5mounting hole
Panel mounting holeReplacement actuator head:VM-36C