536 0 2-2 02 - phd's online litstore

SWITC

HES

9-6www.phdinc.com/products/switchesandsensors • (800) 624-8511PHDV1

ORDERING DATA: SERIES 5360 PROXIMITY SWITCHES

CORD TYPE0 - Cabled2 - Quick Connect

TO ORDER SPECIFY:

SENSINGCIRCUITRY DESCRIPTION SWITCH COLOR

2-2 NPN or PNP DC Reed White3-1 NPN DC Hall Yellow4-1 PNP DC Hall Red5-1 NPN DC Solid State Black6-1 PNP DC Solid State Orange9-2 AC Reed w/Current Limiting Green

Type, Cord Type, Sensing Circuitry,Design No., and Cable Length.

2-2536 0

CABLE LENGTH02 - 2 meter length cable(Leave blank when quick connect is specified)

TYPEHall, Reed, Magnetoresistive

02-

NOTES:1) Cordsets for quick connect switches

must be ordered separately.2) Other cable lengths available. Consult PHD.

PART NO.63549-0263549-05

LENGTH2 meter5 meter

CORDSETSWITH QUICK CONNECT

9-7www.phdinc.com/products/switchesandsensors • (800) 624-8511

SWITC

HES

PHDV1

BENEFITS: SERIES 5360 HALL EFFECT SWITCHES

BENEFITS

■ Series 5360 Hall Effect Switches are available for use on selected PHD products, making it easy to interface these actuators with various electronic controls.

■ Switches have no moving parts or mechanical contacts, providing long switch life and elimination of contact bounce.

■ Constant amplitude output is provided for use with most digital logic systems.

■ Low profile integral clamp mounting is easy to adjust over the entire piston travel of the cylinder or actuator.

■ Several switches may be mounted to control or initiate any sequence or function.

■ Dual LED indicators provide convenient means for positioning and troubleshooting circuits. Green LED shows that power is being received at the switch and amber shows when the switch output is on.

■ Available in a Quick Connect model for easy installation and maintenance.

Series 5360 Hall Effect Switches are designed specifically to provide an input signal to various types of programmable controllers or logic systems. Since Hall Effect Switches are solid-state, there are no moving parts to wear out. They offer an infinite number of trouble-free operations. Hall Effect Switches operate on DC current only.

SPECIFICATIONS 53603 & 53623 53604 & 53624OPERATING PRINCIPLE Hall EffectACTUATED BY Moving MagnetINPUT VOLTAGE 4.5 to 24 VDCOUTPUT TYPE NPN (Sink) PNP (Source)CURRENT RATING 20 mA. Max. 100 mA. Max.VOLTAGE DROP .5 VDC Max.SWITCH BURDEN 12 mA. Max.ENVIRONMENTAL IP67OPERATING TEMP. 0° to 80°C

MODEL NO. 53604 & 53624 - PNP (SOURCE)INPUT - 4.5-24 VDCLOAD CURRENT - 100 mA. MAX.SWITCH HOUSING COLOR - RED(LED’s have been omitted from the schematic for clarity.)

MODEL NO. 53603 & 53623 - NPN (SINK)INPUT - 4.5-24 VDCLOAD CURRENT - 20 mA. MAX.SWITCH HOUSING COLOR - YELLOW(LED’s have been omitted from the schematic for clarity.)

BLACK

BROWN

BLUE

LOAD

SWIT

CH

DC

DCCABLED MODEL 53603

1

2/4

3

PIN 2/4

PIN 1

PIN 3

LOAD

SWIT

CH

DC

DCQUICK CONNECT MODEL 53623

1

2/4

3

PIN 2/4

PIN 1

PIN 3

LOAD

SWIT

CH

DC


LOAD

SWIT

CH

DC


HALL EFFECT WIRING SCHEMATICS

BROWN

BLUE

BLACK

BROWN

BLUE

BLACK

BLACK

BROWN

BLUE

SWITC

HES


BENEFITS: SERIES 5360 SOLID STATE SWITCHES

BENEFITS

■ Series 5360 Solid State Switches are available for use on selected PHD products, making it easy to interface these actuators with various electronic controls.

■ Switches are solid state, having no moving parts or mechanical contacts, providing long switch life and elimination of contact bounce.

■ Transient voltage protection.

■ Constant amplitude output is provided for use with most digital logic systems.

■ Reverse polarity protection.



■ Dual LED indicators provide convenient means for positioning and troubleshooting circuits. Green LED shows that power is being received at the switch and amber shows when the switch output is on.


Series 5360 Solid State Switches are designed specifically to provide an input signal to various types of programmable controllers or logic systems. Since Solid State Switches have no moving parts to wear out, they offer an infinite number of trouble-free operations. Solid State Switches operate on DC current only.

MODEL NO. 53606 & 53626 - PNP (SOURCE)INPUT - 6-24 VDCLOAD CURRENT - 100 mA. MAX.SWITCH HOUSING COLOR - ORANGE(LED’s have been omitted from the schematic for clarity.)

MODEL NO. 53605 & 53625 - NPN (SINK)INPUT - 6-24 VDCLOAD CURRENT - 20 mA. MAX.SWITCH HOUSING COLOR - BLACK(LED’s have been omitted from the schematic for clarity.)

BLACK

BROWN

BLUE

LOAD

SWIT

CH

DC


1

2/4

3

PIN 2/4

PIN 1

PIN 3

LOAD

SWIT

CH

DC


1

2/4

3

PIN 2/4

PIN 1

PIN 3

LOAD

SWIT

CH

DC


LOAD

SWIT

CH

DC


SOLID STATE WIRING SCHEMATICS

BROWN

BLUE

BLACK

BROWN

BLUE

BLACK

BLACK

BROWN

BLUE

SPECIFICATIONS 53605 & 53625 53606 & 53626OPERATING PRINCIPLE Solid StateACTUATED BY Moving MagnetINPUT VOLTAGE 6 to 24 VDC Max.OUTPUT TYPE NPN (Sink) PNP (Source)CURRENT RATING 20 mA. Max. 100 mA. Max.VOLTAGE DROP .5 VDC Max.SWITCH BURDEN 12 mA. Max.ENVIRONMENTAL IP67*OPERATING TEMP. 0° to 80°C


SWITC

HES

PHDV1

DIMENSIONS: SERIES 5360 HALL/SOLID STATE SWITCHES

HALL EFFECT AND SOLID STATE SWITCH

.700 [17.8]

.325[8.2]

.580[14.7]

.061[1.5]

.460[11.7]

.150[3.8]

.320[8.1]

.126[3.2]

.290[7.4]

2 m CABLE x Ø .134 [3.40]

HALL EFFECT AND SOLID STATE SWITCH WITH MALE QUICK CONNECT

[M8x1]

CABLE x Ø .134 [3.40]

4.000[102.0] .290

[7.4].126[3.2]

.325[8.3]

.061[1.5]

.460[11.7]

.150[3.8]

.320[8.1]

(5.590 [142])

.580[14.7]

.700[17.8]

MODEL NO. A78.74[2 m]

196.85[5 m]

LETTER DIM.

63549-02

63549-05

PIN 2/4WIRE COLOR

BLACK

PIN 1WIRE COLORBROWN

PIN 3WIRE COLORBLUE

A

� .402[10.2]

.689 [19.3]

1.299 [34.8]

CABLE x � .177 [4.5]

63549-xx CORDSET WITH FEMALE QUICK CONNECT

NUMBERS IN [ ] ARE IN mm–IMPERIAL EQUIVALENTS ARE PROVIDED FOR CONVENIENCE

All dimensions are reference only unless specifically toleranced.

SWITC

HES



196.85[5 m]

LETTER DIM.

63549-02

63549-05

PIN 2/4WIRE COLOR

BLACK


PIN 3WIRE COLORBLUE

A

� .402[10.2]

.689 [19.3]

1.299 [34.8]

CABLE x � .177 [4.5]


NUMBERS IN [ ] ARE IN mm – IMPERIAL EQUIVALENTS ARE PROVIDED FOR CONVENIENCE

DIMENSIONS: SERIES 5360 REED SWITCHESREED SWITCH REED SWITCH WITH MALE QUICK CONNECT

MODEL NO.53602-2 & 53622-253609-2 & 53629-2

A.685 [17.4].895 [22.7]

B1.090 [27.7]1.300 [33]

LETTER DIM.

BENEFITS: SERIES 5360 REED SWITCHES

BENEFITS

■ Series 5360 Reed Switches are available for use on selected PHD products, making it easy to interface these actuators with various electronic controls.



■ An LED indicator provides convenient means for positioning and troubleshooting circuits.


■ Special current limit model available for AC applications where inrush might otherwise damage the switch. 53609-2*

SPECIFICATIONS 53602-2 & 53622-2 & 53629-2*OPERATING PRINCIPLE Magnetic ReedACTUATED BY Moving MagnetINPUT VOLTAGE 4.5 to 24 VDC 110 to 120 VACOUTPUT TYPE Contact ClosurePOWER CAPACITY 4 Watt Max. 2.5 Watt Max.CURRENT RATING 200 mA. Max. Inter. Limited to 20 mA.CONTACT RESISTANCE .200 Ohms Max. 1.5 kOhmENVIRONMENTAL IEC IP67OPERATING TEMP. 0° to 80°C

Series 5360 Reed Switches are available in either AC or DC models. They are ideal for use as inputs for many types of sequencers and programmable controllers. In some cases, they can be used to drive some relays or valve solenoids. However, electrical transients (inrush currents or line spikes) associated with inductive or capacitive loads can damage and shorten the life of the switch.


[M8x1]

CABLE x Ø .134 [3.40]

4.000[102.0] .290

[7.4].126[3.2]

.325[8.3]

.061[1.5]

.460[11.7]

.150[3.8]

.320[8.1]

(5.590 [142])

.580[14.7]

.700[17.8]

* CE certification not applicable to these switch models.



SWITC

HES

PHDV1

MODEL NO. 53602-2 & 53622-2 - NPN (SINK) OR PNP (SOURCE)INPUT - 4.5-24 VDCPOWER CAPACITY - 4 WATT MAX.LOAD CURRENT - 200 mA. MAX.

MODEL NO. 53609-2 & 53629-2INPUT - 110-120 VACSWITCHED POWER - 2.5 WATT MAX.INTERNAL RESISTANCE - 1.5 kOhmSWITCH HOUSING COLOR - GREEN

CABLED MODEL 53609-2

BLACK

BROWN

BLUE

LOAD

LIN

E

QUICK CONNECT MODEL 53629-2

LOAD

LIN

E

PIN 2/4

PIN 1

PIN 3

1

2/4

3

REED WIRING SCHEMATICS

LOAD

DC

DCCABLED MODEL 53602-2 - NPN (SINK) CABLED MODEL 53602-2 - PNP (SOURCE)

LOAD

DC

DC

1

2/4

3

QUICK CONNECT MODEL 53622-2 - NPN (SINK)

PIN 2/4

PIN 3

PIN 1

LOAD

DC

DC1

2/4

3

QUICK CONNECT MODEL 53622-2 - PNP (SOURCE)

PIN 2/4

PIN 1

PIN 3

LOAD

DC

DC

SWITCH HOUSING COLOR - WHITE(Bi-polar LED emits a green light in the Sinking circuitand a red light in the Sourcing circuit.)

BROWN

BLUE

BLACK

BROWN

BLUE

BLACK

BROWN

BLUE

BLACK

BLACK

BROWN

BLUE

BLACK

BROWN

BLUE

ENGINEERING DATA: SERIES 5360 REED SWITCHES


SWITC

HES




TO ORDER SPECIFY:


5-1 NPN (Sink) DC Solid State Brown6-1 PNP (Source) DC Solid State Tan7-1 AC/DC Reed Silver

Type, Cord Type, Sensing Circuitry,Design No., and Cable Length.

7-1625 0


TYPEReed, Magnetoresistive

02-



PART NO.61397-0261397-05

CABLE LENGTH2 meter/3 wire5 meter/3 wire

CORDSETS WITH QUICK CONNECT

NOTE: This cordset is used for both3-wire and 2-wire applications.When used in 2-wire applications,refer to the schematic anddisregard the black wire.


SWITC

HES

PHDV1

BENEFITS: SERIES 6250 REED SWITCHES

BENEFITS

■ Series 6250 Reed Switches are available for use with PHD ISO Cylinder and on other select PHD actuators which use the “M” magnet option.

■ Series 6250 Reed Switches offer both 120 VAC or 10 to 30 VDC sink and source operation for maximum flexibility in interfacing with various electronic controls.

■ Special current limiting feature is designed into each switch for protection against potential current inrush damage to switch components.

■ Integral clamp mounting provides easy attachment and adjustment while eliminating the cost of brackets and additional hardware.

■ Several switches may be used on an actuator to control or initiate a sequence or function.

■ LED indicator provides convenient means for positioning and troubleshooting circuits.

■ Switches include either a hard wired 24 AWG, Polyurethane (PUR) jacketed cable making it virtually impervious to chemical or environmental damage, or an integral 8 mm screw type connector mounted directly on the switch.

■ IP67 Environmental Protection

SPECIFICATIONS 62507-1 62517-1SWITCH COLOR SilverOPERATING PRINCIPLE Magnetic ReedACTUATED BY Moving MagnetINPUT VOLTAGE 10 to 30 VDC or 110-120 VAC*OUTPUT VOLTAGE Contact ClosurePOWER CAPACITY 2.5 Watt Max.CURRENT RATING Internally Limited to 25 mA.IMPEDANCE 2.25 k OhmENVIRONMENTAL IP67OPERATING TEMP. 0� to 80�C

MODEL NO. 62507-1 & 62517-1INPUT - 10 to 30 VDCPOWER CAPACITY - 2.5 WATTS MAX.LOAD CURRENT - 25 mA. MAX.SWITCH HOUSING COLOR - SILVER

MODEL NO. 62507-1 & 62517-1INPUT - 110 - 120 VACPOWER CAPACITY - 2.5 WATTS MAX.LOAD CURRENT - 25 mA. MAX.INTERNAL RESISTANCE - 2.25 k OhmSWITCH HOUSING COLOR - SILVER


CABLED MODEL 62507-1Alternate load position forsink circuitBROWN

BLUE DC

DCLOAD


1

2/4

3

PIN 1

PIN 3 DC

DCLOAD

BROWN

BLUE

CABLED MODEL 62507-1

1

2/4

3

PIN 1

PIN 3


LIN

ELI

NE

LOAD

LOAD

Alternate load position forsink circuit


LOAD

LOAD

LOAD

LOAD


* CE certification applicable to 10 to 30 VDC range only.

SWITC

HES


BENEFITS: SERIES 6250 SOLID STATE SWITCHES

BENEFITS

■ Series 6250 Solid State Switches are available for use with PHD ISO Cylinders and on other select PHD actuators which use the “M” magnet option

■ Available in both current sinking or current sourcing models for maximum flexibility in interfacing with various electronic controls.

■ Series 6250 Solid State Switch circuitry protects against voltage surges and other electrical anomalies associated with operating systems.

■ Integral clamp mounting provides easy attachment and adjustment while eliminating the cost of brackets and additional hardware.


■ An LED indicator provides convenient means for positioning and troubleshooting circuits.

■ Switches include either a hard wired 24 AWG, Polyurethane (PUR) jacketed cable making it virtually impervious to chemical or environmental damage, or an integral 8mm screw type connector mounted directly on the switch.


Series 6250 Solid State Switches are designed specifically to provide an input signal to various types of programmable controllers or logic systems. Since Solid State Switches have no moving parts to wear out, they offer an infinite number of trouble-free operations. Solid State Switches operate on DC current only.

MODEL NO. 62506-1 & 62516-1 - PNP - (SOURCE)INPUT - 10-30 VDCLOAD CURRENT - 100 mA. MAX.SWITCH HOUSING COLOR - TAN(LED has been omitted from the schematic for clarity.)

MODEL NO. 62505-1 & 62515-1 - NPN - (SINK)INPUT - 10-30 VDCLOAD CURRENT - 100 mA. MAX.SWITCH HOUSING COLOR - BROWN(LED has been omitted from the schematic for clarity.)

BLACK

BROWN

BLUE

LOADMR

SWIT

CH

DC

DCCABLED MODEL 62505-1

1

2/4

3

2/4

PIN 1

PIN 3

LOADMR

SWIT

CH

DC

DCQUICK CONNECT MODEL 62515-1

1

2/4

3

2/4

PIN 1

PIN 3

LOADMR

SWIT

CH

DC


BLACK

BROWN

BLUE

LOADMR

SWIT

CH

DC


MAGNETORESISTIVE WIRING SCHEMATICS

62505-1 & 62506-1 &SPECIFICATIONS 62515-1 62516-1SWITCH COLOR Brown TanOPERATING PRINCIPLE MagnetoresistiveACTUATED BY Moving MagnetINPUT VOLTAGE 10 to 30 VDCOUTPUT TYPE NPN (Sink) PNP (Source)CURRENT RATING 100 mA. Max. 100mA. Max.VOLTAGE DROP .5 VDC Max.SWITCH BURDEN 12 mA. Max.ENVIRONMENTAL IP67OPERATING TEMP. 0° to 80°C


SWITC

HES

PHDV1

.318[8.1] .660

[16.7]

.183[4.6]

.158[4]

.071[1.8]

.503[12.8] .380

[9.6]

.682[17.3]1.088

[27.6]

MODEL NO. A78.7

[2000]197.0[5000]

LENGTH

3 wire

3 wire

LETTER DIM.

61397-02

61397-05

PIN 3 - BLUE WIREPIN 2/4 - BLACK COLOR

.335[8.5]

PIN 1 - BROWN WIRE CABLE x � .177 [4.5]

A

DIMENSIONS: SERIES 6250 REED/SOLID STATE SWITCHES

REED AND SOLID STATE SWITCHWITH QUICK CONNECT

REED AND SOLID STATESWITCH CABLED

.660[16.7]

.203[5.2]

SGNL

.876[22.3]

.682[17.3]1.088

[27.6]

M8 THREAD

.660[16.7]

.503[12.8]

.380[9.6]

.318[8.1]

.071[1.8]



NOTE: THIS CORDSET IS USED FOR BOTH 3-WIRE AND 2-WIRE APPLICATIONS. WHEN USED IN 2-WIRE APPLICATIONS, REFER TO THE SCHEMATIC AND DISREGARD THE BLACK WIRE.


SWITC

HES


ORDERING DATA: SERIES 1750 SWITCHES

ORDERING DATA

COMMON BENEFITS■ Series 1750 switches are available for use on most Tom

Thumb and PHD products for simple interfacing to many types of electrical controllers.

■ The compact low profile design saves space and provides mounting versatility.

■ Low profile bracket attaches securely across two tie rods and allows easy position adjustment over the entire piston travel of the cylinder or actuator.


■ Red LED indicator provides convenient method for position setting and troubleshooting.

■ Available in a cabled or 8 mm threaded Quick Connect model for easy installation and maintenance.

■ 24 AWG polyurethane (PUR) jacketed cable is robust and virtually impervious to chemical and environmental damage.

■ Multiple switches may be mounted to control or initiate any sequence or function.

SOLID STATE BENEFITS■ Solid state switches afford long life. Constant amplitude output

allows use with most digital logic systems.

■ Switch circuitry protects against voltage surges and other electrical anomalies associated with operating systems.

■ Excellent switch hysteresis characteristics and symmetry.

■ Offered in 10-30 VDC current sinking and current sourcing versions for simple interfacing to electronic system controllers.

REED BENEFITS■ Available as either 10-30 VDC or 110-120 VAC models

for simple interfacing to sequencers and programmable controllers.

■ Can be used to directly drive some types of relays or valve solenoids.


TO ORDER SPECIFY:


2-2 NPN or PNP DC Reed White3-2 NPN DC Solid State Yellow4-2 PNP DC Solid State Red9-3 *AC Reed w/Current Limiting Green

Type, Cord Type, SensingCircuitry, Design No., andCable Length.

2-2175 0

CABLE LENGTH06 - 6 ft [1.8 m] length cable(Leave blank when quick connect is specified)

06- NOTES:1) Cordsets for quick connect

switches must be ordered separately. See page 9-17.

2) Other cable lengths available. Consult PHD.

3) *CE certification not applicable to the AC Reed with Current Limiting model.

TYPESolid State, Reed

PART NO.63549-0263549-05




SWITC

HES

PHDV1

.500 [12.7] MAX

.137 [3.5] MAX

1.000[25.4]LED INDICATOR

.690[17.5]

LINEAR SECTION17000-36-017000-37-017000-40-017000-41-017000-35-0

SERIES1000 & 20003000 & 40005000 & 60007000 & 8000MINIATURE

ROTARY SECTION17000-32-517000-34-517000-38-017000-39-0

—

COMPACT BRACKETSROTARY & MULTI-MOTION ACTUATORS

NPG

METRIC1925293519293551752935

COMPACT BRACKETS17000-31-517000-32-517000-33-517000-34-517000-35-017000-36-017000-37-017000-40-017000-41-017000-33-517000-36-0

EA, EL,& NEA

AV & HV

SERIES

CYLINDERSBORE SIZE

IMPERIAL3/41

1-1/81-3/83/4

1-1/81-3/8

23

1-1/81-3/8

COMPACT BRACKETS*17000-51-017000-51-017000-51-017000-51-017000-51-017000-57-0

IMPERIAL LARGE BORE CYLINDERSBORE SIZE

1-1/22

2-1/23-1/4*

45, 6, & 8

*3-1/4" Bore C& C Cylindersrequire switchbracket5142-54-3.

SWITCH BRACKETDOES NOT EXTENDBEYOND CYLINDER

OUTLINE ON THIS SIDE

.144 [3.7] MAX

.429 [10.9] MAX

1.000[25.4] LED INDICATOR

.700[17.8]

17000-31-517000-32-517000-33-517000-34-5

17000-35-017000-36-017000-37-017000-40-017000-41-0

SWITCH BRACKET DOES NOT EXTENDBEYOND CYLINDER OUTLINE ON THIS SIDE

DESCRIPTIONStrain relief kit for non -5 brackets (-35-0 through -41-0)Strain relief kit for Series SD/SE Slide size 26

PART NUMBER1749418412

SD/SE SLIDESBRACKET

17000-31-517000-32-517000-33-517000-34-558050-02

BORE SIZE2223242526

REED SWITCH

LED INDICATOR 4° TYP

6 ft [1.8 m] CABLEx Ø .177 [4.5].473

[12.0]

.028 [.71]

Ø .200 [4.6]

1.000 [25.4]

.286[7.3]

.322[8.2]

.178[4.52]

.323[8.2]

MALE QUICK CONNECT DETAIL

SOLID STATE SWITCH

Ø .200 [4.6]

LED INDICATOR

1.000 [25.4]

4° TYP

.286[7.3]

6 ft [1.8 m] CABLEx Ø .177 [4.5]

.322[8.2]

.178[4.52]

.323[8.2]

.473[12]


4° TYP

.473[12.0]

.028 [.71]

4.000[101.6]

Ø .177 [4.5]

.286[7.3]

.322[8.2]

.178[4.52]

.323[8.2]

(5.590 [142])

.314[8]

M8x1


SWITCH BRACKETS17000-xx-5

DIMENSIONS: SERIES 1750 SWITCHES

MODEL NO. L78.74[2 m]

196.85[5 m]

LETTER DIM.

63549-02

63549-05

PIN 2/4WIRE

COLORBLACK

BLACK CABLE

PIN 3WIRE COLORBLUE L

1.299[34.8]

Ø .402[10.2]

.689[19.3]

BLACK CONNECTORPIN 1WIRE COLORBROWN


NOTES: 1) For alternative supplier part numbers, see page 9-5.2) For earlier design switches 1752x-1 and 17529-2, use cordset 17533-00-02 or 17533-00-05.

17000-xx-0


SWITC

HES


SPECIFICATIONS: SERIES 1750 SWITCHES

17502-2 17509-3*SPECIFICATIONS 17522-2 17529-3*OPERATING PRINCIPLE Magnetic ReedACTUATED BY Piston MagnetINPUT VOLTAGE 10-30 VDC 110-120 VACPOWER CAPACITY 10 Watt Max. 10 Watt Max.OUTPUT TYPE Contact ClosureCURRENT RATING 200 mA. Inter. Limited

Switched to 85 mA.CONTACT RESISTANCE .1 Ohm Max. .1 Ohm Max.ENVIRONMENTAL IP67OPERATING TEMP. 0° to 80°C

SPECIFICATIONS 17503-2 & 17523-2 17504-2 & 17524-2OPERATING PRINCIPLE Solid StateACTUATED BY Piston MagnetINPUT VOLTAGE 10-30 VDCOUTPUT TYPE NPN (Sink) PNP (Source)CURRENT RATING 20 mA. Max 100 mA. MaxVOLTAGE DROP .5 VDCSWITCH BURDEN 10 mA. Max.ENVIRONMENTAL IP67OPERATING TEMP. 0° to 80°C

* CE certification not applicable to these switch models.

MODEL NO. 17504-2 & 17524-2 - PNP (SOURCE)INPUT - 10-30 VDCLOAD CURRENT - 100 mA. MAX.SWITCH HOUSING COLOR - RED(LED’s have been omitted from the schematic for clarity.)

MODEL NO. 17503-2 & 17523-2 - NPN (SINK)INPUT - 10-30 VDCLOAD CURRENT - 20 mA. MAX.SWITCH HOUSING COLOR - YELLOW(LED’s have been omitted from the schematic for clarity.)

BLACK

BROWN

BLUE

LOAD

SWIT

CH

DC


PIN 2/4

PIN 1

PIN 3

LOAD

SWIT

CH

DC


BLACK

BROWN

BLUE

LOAD

SWIT

CHDC



MODEL NO. 17502-2 & 17522-2 - NPN (SINK) OR PNP (SOURCE)INPUT - 10-30 VDCPOWER CAPACITY - 3 WATT MAX.LOAD CURRENT - 200 mA. MAX.SWITCH HOUSING COLOR - WHITE(Bi-polar LED emits a red light.)

MODEL NO. 17509-3 & 17529-3INPUT - 120 VACSWITCHED POWER - 3 WATT MAX.INTERNAL RESISTANCE - 1.5 kOhmSWITCH HOUSING COLOR - GREENCABLED MODEL 17509-3

LOAD

LIN

E


BROWN

BLACK

BLUE

LOAD

DC

DCCABLED MODEL 17502-2 - NPN (SINK)

CABLED MODEL 17502-2 - PNP (SOURCE)

LOAD

DC

DC

BROWN1

2/4 BLACK

3BLUE

PIN 2/4

PIN 1

PIN 3

LOAD

SWIT

CH

DC


BROWN1

2/4 BLACK

3BLUE

QUICK CONNECT MODEL 17522-2 - NPN (SINK)

PIN 2/4

PIN 3

PIN 1

LOAD

DC

DC BROWN1

2/4 BLACK

3BLUE

QUICK CONNECT MODEL 17522-2 - PNP (SOURCE)

PIN 2/4

PIN 1

PIN 3

LOAD

DC

DC BROWN1

2/4 BLACK

3BLUE

LOAD

LIN

E

PIN 2/4

PIN 1

PIN 3

BROWN1

2/4 BLACK

3BLUE

BROWN

BLACK

BLUE

BROWN

BLACK

BLUE



SWITC

HES

PHDV1


BENEFITS

■ Series 5580 Proximity Switches are available for use on selected PHD products making it easy to interface these actuators with various electronic controls.

■ Hall Effect Switches are solid state for long life and elimination of contact bounce. Constant amplitude output is provided for use with most digital logic systems.

■ Low profile mounting is easy to adjust at the ends of travel of the slide or gripper.

■ LED indicator provides convenient means for positioning and troubleshooting circuits. An LED shows when the switch output is on.


HALL EFFECTPHD Series 5580 Hall Effect Proximity Switches are

designed specifically to provide an input signal to various types of programmable controllers or logic systems. Since Hall Effect Switches are solid-state, there are no moving parts to wear out. The switches offer an infinite number of trouble-free operations. Hall Effect Switches operate on DC current only.

REEDPHD Series 5580 Reed Switches are available in a DC model.

They are ideal for use as inputs for many types of sequencers and programmable controllers. In some cases, they can be used to drive some relays or valve solenoids. However, electrical transients (inrush currents or line spikes) associated with inductive or capacitive loads can damage and shorten the life of the switch.

SPECIFICATIONS 55803 & 55823 55804 & 55824OPERATING PRINCIPLE Hall EffectACTUATED BY Target MagnetINPUT VOLTAGE 4.5 to 24 VDCOUTPUT TYPE NPN (Sink) PNP (Source)CURRENT RATING 20 mA. Max. 100 mA. Max.VOLTAGE DROP .5 VDC Max.SWITCH BURDEN 12 mA. Max.ENVIRONMENTAL IP67OPERATING TEMP. 0° to 80°C

SPECIFICATIONS 55802 & 55822OPERATING PRINCIPLE Magnetic ReedACTUATED BY Target MagnetINPUT VOLTAGE 4.5 to 24 VDCOUTPUT TYPE NPN (Sink) or

PNP (Source)CURRENT RATING 200 mA. SwitchedCONTACT RESISTANCE .090 Ohm Max.ENVIRONMENTAL IP67OPERATING TEMP. 0° to 80°C

TYPEHall, Reed

TO ORDER SPECIFY:Type, Cord Type, Sensing Circuitry,Design No., and Cable Length.

2-1558 0


02-





2 - 1 NPN or PNP DC Reed White3 - 1 NPN DC Hall Yellow4 - 1 PNP DC Hall Red

PART NO.63549-0263549-05



SWITC

HES



DIMENSIONS: SERIES 5580 PROXIMITY SWITCHES

HALL EFFECT AND REED SWITCH

HALL EFFECT AND REED SWITCH WITH MALE QUICK CONNECT

1.180 [30.0]

.118[3.0]

2 m CABLE x Ø .134 [3.4]

.236 [6.0]SQ.118[3.0]

MODEL NO. 55804 & 55824 - PNP (SOURCE)INPUT - 4.5-24 VDCLOAD CURRENT - 100 mA. MAX.SWITCH HOUSING COLOR - RED(LED has been omitted from the schematic for clarity.)

MODEL NO. 55803 & 55823 - NPN (SINK)INPUT - 4.5-24 VDCLOAD CURRENT - 20 mA. MAX.SWITCH HOUSING COLOR - YELLOW(LED has been omitted from the schematic for clarity.)

BLACK

BROWN

BLUE

LOAD

SWIT

CH

DC


BLACK

BROWN

BLUE

LOAD

SWIT

CH

DC


PIN 2/4

PIN 1

PIN 3

LOAD

SWIT

CH

DC

DC

QUICK CONNECT MODEL 55824

HALL EFFECT WIRING SCHEMATICS


PIN 2/4

PIN 1

PIN 3

LOAD

SWIT

CH

DC

DC


MODEL NO. 55802 & 55822 - NPN (SINK) OR PNP (SOURCE)INPUT - 4.5-24 VDC(Bi-polar LED emits a green light in the Sinking circuit and a red light in the Sourcing circuit.)

BLACK

BROWN

BLUE

DC

DC

PIN 2/4

PIN 1

PIN 3

LOAD

DC

DC

PIN 2/4

PIN 1

PIN 3

LOAD

DC

DC

CABLED MODEL 55802 - NPN (SINK)

QUICK CONNECT MODEL 55822 - NPN (SINK)

CABLED MODEL 55802 - PNP (SOURCE)

QUICK CONNECT MODEL 55822 - PNP (SOURCE)

LOAD CURRENT - 200 mA. MAX.SWITCH HOUSING COLOR - WHITE

DC

DC

BLACK

BLUE

BROWN

LOAD LOAD

BROWN1

2/4 BLACK

3BLUE

BROWN1

2/4 BLACK

3BLUE

BROWN1

2/4 BLACK

3BLUE

BROWN1

2/4 BLACK

3BLUE


[M8x1]

CABLE x � .134 [3.40]

4.000[102.0]

1.180 [30.0](5.550 [141])

.236 [6.0] SQ


196.85[5 m]

LETTER DIM.

63549-02

63549-05

PIN 2/4WIRE COLOR

BLACK


PIN 3WIRE COLORBLUE

A

� .402[10.2]

.689 [19.3]

1.299 [34.8]

CABLE x � .177 [4.5]



SWITC

HES

PHDV1

ORDERING DATA

NOTES:1) Cordsets for quick connects must be ordered separately.2) *AC Reed (9-2) available with quick connect only.

TO ORDER SPECIFY:Product Type, Cable Type,Sensing Circuitry, Cable Length

2-1679 0

SENSING CIRCUITRY2-1 PNP or NPN DC Reed9-2 AC Reed

CABLE TYPE0 - Cabled2 - Quick Connect

PRODUCT TYPEReed

PART NO.63549-0263549-05



CABLE LENGTH05 - 5 meter length cableLeave blank when quickconnect is specified

05-

67902-1-0567922-167929-2

AVAILABLE MODELS

BENEFITS■ Model 6790 Switches are available for use on many actuators.

■ Saving space and providing mounting versatility, the round design fits into grooves in the body of the actuator.


■ LED indicator provides convenient method for position setting and troubleshooting.

■ Available in 8 mm threaded Quick Connect model for easy installation and maintenance.

■ 28 AWG Polyurethane (PUR) jacketed cable

■ Multiple switches may be mounted to control or initiate any sequence or function.

■ Available in 4.5 - 30 VDC or 65 - 120 VAC models for simple interfacing to sequencers and programmable controllers.

■ Can be used to directly drive some types of relays or valve solenoids within the switch specifications stated.

4.5 - 30 VDC

50 mA Max.

.12 Ohm Max

SPECIFICATIONS OPERATING PRINCIPLEACTUATED BYINPUT VOLTAGEOUTPUT TYPECURRENT RATINGENVIRONMENTALOPERATING TEMP.IMPEDANCE

67902 & 67922Magnetic ReedPiston Magnet

Contact Closure

IP67-20° to 85°C

67929

65 - 120 VAC

25 mA Max.

1.5 k Ohm

ORDERING DATA: MODEL 6790 SWITCHES

SWITC

HES


BENEFITS: MODEL 6790 SWITCHES

MODEL NO.63549-0263549-05

LETTER DIM.L

78.74 [2 m]196.85 [5 m]

PIN 2/4WIRE COLOR

BLACK

BLACK CABLE

PIN 3WIRE COLORBLUE L

1.299[34.8]

Ø .402[10.2]

.689[19.3]

BLACK CONNECTORPIN 1WIRE COLORBROWN


MODEL NO. 67904-1 & 67924-1 - PNP (SOURCE)INPUT: 4.5-30 VDCLOAD CURRENT: 50 mA. MAX.SWITCH HOUSING COLOR: BLACK(Bi-polar LED emits a red light.)

MODEL NO. 67903-1 & 67923-1 - NPN (SINK)INPUT: 4.5 - 30 VDCLOAD CURRENT: 50 mA. MAX.SWITCH HOUSING COLOR: BLACK(Bi-polar LED emits a yellow light)


MODEL NO. 67902-1 & 67922-1 - NPN (SINK) OR PNP (SOURCE)INPUT: 4.5 - 30 VDCLOAD CURRENT: 50 mA. MAX.IMPEDANCE: .12 Ohm MAX.SWITCH HOUSING COLOR: BLACK(LED emits a red light)


CABLED MODEL 67902 - NPN (SINK) CABLED MODEL 67902 - PNP (SOURCE)


QUICK CONNECT MODEL 67922 - NPN (SINK) QUICK CONNECT MODEL 67922 - PNP (SOURCE)

CABLED MODEL 67903


BLACK

BROWN

BLUE

LOAD

SWIT

CH

DC

DC

PIN 2/4

PIN 1

PIN 3

LOAD

SWIT

CH

DC

DC

CABLED MODEL 67904

BLACK

BROWN

BLUE

LOAD

SWIT

CHDC

DC

PIN 2/4

PIN 1

PIN 3

LOAD

SWIT

CH

DC

DC BROWN1

2/4 BLACK

3BLUE

BROWN

BLACK

BLUE

LOAD

DC

DC

PIN 2/4

PIN 3

PIN 1

LOAD

DC

DC BROWN1

2/4 BLACK

3BLUE

LOAD

DC

DCBROWN

BLACK

BLUE

PIN 2/4

PIN 1

PIN 3

LOAD

DC

DC BROWN1

2/4 BLACK

3BLUE

BROWN1

2/4 BLACK

3BLUE

SWIT

CHSW

ITCH

SWIT

CHSW

ITCH

MODEL NO. 67929-2INPUT: 65 - 120 VDCLOAD CURRENT: 25 mA. MAX.IMPEDANCE: 1.5 k OhmSWITCH HOUSING COLOR: BLACK(LED emits a red light)

AC REED WIRING SCHEMATICSQUICK CONNECT MODEL 67929-2

PIN 2/4

PIN 3

PIN 1

LOAD

BROWN1

2/4 BLACK

3BLUE

SWIT

CH

LIN

E

3-48 x 3/16 [4.8]SET SCREW .050 [1.3] HEX*

.180 [4.6].102 [2.6]

.134 [3.4]

.236 [6]

1.736 [44]

Ø .315 [8].260 [6.6]M8 x 1 THREAD

LED.078 [2]

.136 [3.5].777 [19.7]

1.100 [27.9]

.156 [3.9].108 [2.7].095 [2.4]


*MAX. SCREW TORQUE 1.0 in-lb [.110 Nm] METRIC INFORMATION SHOWN IN [ ]

12.0 [305]



SWITC

HES

PHDV1

ORDERING DATA: MODEL JC1 SWITCHES

TO ORDER SPECIFY:Product, Series, Design No.,Options, Type, Circuit Type, andCable Options.

TYPED - DC Single PositionT - DC 2 Position Teachable

DESIGN NO.

SC P1

OPTIONSS - Solid State

2

PRODUCTJ - Switches

J

SERIESC - C-Slot Mounting

T

CIRCUIT TYPEN - NPNP - PNP

(DC 2 positionteachable available in

PNP only)

-

CABLE OPTIONSK - Quick Connect2 - 2 Meter Cable (Available on JC1STP only)5 - 5 Meter Cable (Not available on JC1STP)

NEW PHD SWITCH no direct substitute*†no direct substitute*†

JC1SDN-5JC1SDN-5JC1SDP-5JC1SDP-5

no direct substitute*†JC1SDN-KJC1SDP-K

still available

CURRENT 6790 SWITCH67902-1-0267902-1-0567903-1-0267903-1-0567904-1-0267904-1-05

67922-167923-167924-167929-2

DESCRIPTIONPNP or NPN DC Reed, 2 meter CablePNP or NPN DC Reed, 5 meter CableNPN DC Solid State, 2 meter CableNPN DC Solid State, 5 meter CablePNP DC Solid State, 2 meter CablePNP DC Solid State, 5 meter Cable

PNP or NPN DC Reed, Quick ConnectNPN DC Solid State, Quick ConnectPNP DC Solid State, Quick Connect

AC Reed, Quick Connect

SWITCH CROSS REFERENCE CHART

*Consider Solid State to replace DC Reed.† CAUTION: If used for 67902-1-xx or 67922-1 Switch replacement, power connection (brown and

blue leads) may need to be reversed to match connection diagram on page 6.

SWITC

HES


Common Benefits for Both Styles• Fits into 4mm switch slot

• IP67 Environmental Protection

• LED indicator for convenient setting and troubleshooting

• Integrated protection circuitry including short circuit protection

• Polyurethane (PUR) jacketed cable

• Available in solid state sensing only for longest life and most reliable operation

• Improved switch hysteresis and magnetic response uniformity

• Quick connect available

Both switches have a unique housing design which allows “drop-in” installation from the side, does not have to be inserted from the end of the slot

Recommended PHD Products Use• GRIPPERS: Series GRK, EGRK, GRB, GRF (JC1SD only), & GRS (JC1SD only)• ROTARY ACTUATORS: Series RI, RCC• SLIDES: Series SFP, SFM, SHP, STP, SIP, SMx, & SxL, SxH• CYLINDERS: Series CRS & CTS

Teachable Series JC1 Switches

• Teachable switches feature two programmable outputs. Switch is simply mounted in a convenient location, such as middle of travel, then actuator is placed in first desired position and first output is set. Then actuator is placed in second desired position and second output is set. Outputs retain settings even after power interruption.

• Since each switch provides two outputs, an actuator with only two slots may have up to four outputs by using two switches.

• Offered in 12 – 30 VDC current sourcing (PNP) version only

• Available in cabled (2 meter) or quick connect versions.

Standard Series JC1 Switches• Available in cabled (5 meter) or quick connect versions

• Available in solid state sensing only for longest life and most reliable operation

• Offered in 10 – 30 VDC current sinking (NPN) and current sourcing (PNP) versions for simple interfacing to system controllers.

• Replaces PHD Series 6790 Switches (excluding AC applications) See chart on page 2.

TEACHABLE

STANDARD

Use two position teachable switches for:

• Reduced cabling • Simplified setup,

• More sensing positions

Standard JC1 Switches

can be used on manyPHD Standard

Actuators

Tilt switchto drop in, thenrotate logo up.

BENEFITS: SERIES JC1 SWITCHES


SWITC

HES

PHDV1

This switch provides the ability to identify two separately programmable positions with a single switch. Programmable capability means no “fine-tuning.” With switch properly aligned, just place actuator in desired positions and program. Solid-state sensing technology provides a highly reliable switch. Elliptical housing allows for easy “drop-in” installation from the side, and does not have to be inserted from the end of the slot. LED indicators on module for positioning and programming. Available with 2 meter cable or 8 mm threaded Quick Connect.

JC1STP-2

DIMENSIONS: SERIES JC1ST TEACHABLE SWITCHES

ENGINEERING DATA: SERIES JC1ST TEACHABLE SWITCHES

SERIES JC1ST TWO POSITION TEACHABLE MAGNETIC SWITCH

JC1STP-2

JC1STP-K (Quick Connect) 81284-1-001 CORDSET

SPECIFICATIONS JC1STP-xOPERATING PRINCIPLE Programmable Magnetic

Field CharacterizationINPUT VOLTAGE 12 - 30 VDCNUMBER & TYPE OF OUTPUTS Two PNP (source),

separately adjustableOUTPUT CURRENT 100 mA max.,

Short Circuit ProtectionVOLTAGE DROP � 2.2 VDCSWITCH BURDEN � 15 mAENVIRONMENTAL IP67OPERATING TEMP. -20�C to 75�CTYP. DETECTION AREA 0-50 mm

PART NO.JC1STP-2JC1STP-K

SWITCH DESCRIPTIONPNP (Source), Solid State, 12-30 VDC, 2 meter cablePNP (Source), Solid State, 12-30 VDC, Quick Connect

MATCHING CORDSETPART NO.

81284-1-001DESCRIPTION

M8, 4 pin, Straight Female Connector, 5 meter cable

M8 x 1

� .394[10]

1.200[30.5]

M8 x 1

PIN 1WIRE

COLORBROWN

PIN 2WIRECOLORWHITE

PIN 3WIRECOLORBLUE

PIN 4WIRECOLORBLACK

.150[3.8]

.113[2.87]

.768[19.5]

3.750[95.25]

1.181[30]

.177[4.5] .256

[6.5]

.020[0.5]

FOR SWITCH DIMENSIONSSEE ABOVE

19.125[485.78]

FOR TEACH MODULEDIMENSIONS SEE ABOVE

1.349[34.3]

DETECTION AREA

JC1STP-2

JC1STP-K (Quick Connect) 81284-1-001 CORDSET

SPECIFICATIONS JC1STP-xOPERATING PRINCIPLE Programmable Magnetic

Field CharacterizationINPUT VOLTAGE 12 - 30 VDCNUMBER & TYPE OF OUTPUTS Two PNP (source),

separately adjustableOUTPUT CURRENT 100 mA max.,

Short Circuit ProtectionVOLTAGE DROP � 2.2 VDCSWITCH BURDEN � 15 mAENVIRONMENTAL IP67OPERATING TEMP. -20�C to 75�CTYP. DETECTION AREA 0-50 mm

PART NO.JC1STP-2JC1STP-K


MATCHING CORDSETPART NO.

81284-1-001DESCRIPTION

M8, 4 pin, Straight Female Connector, 5 meter cable

M8 x 1

� .394[10]

1.200[30.5]

M8 x 1

PIN 1WIRE

COLORBROWN

PIN 2WIRECOLORWHITE

PIN 3WIRECOLORBLUE

PIN 4WIRECOLORBLACK

.150[3.8]

.113[2.87]

.768[19.5]

3.750[95.25]

1.181[30]

.177[4.5] .256

[6.5]

.020[0.5]

FOR SWITCH DIMENSIONSSEE ABOVE

19.125[485.78]

FOR TEACH MODULEDIMENSIONS SEE ABOVE

1.349[34.3]

DETECTION AREA

TEACHABLE

SWITC

HES


PROGRAMMING GUIDE: SERIES JC1 TEACHABLE SWITCHES

� � �

��

��

�

�

�

��

��

��

��

��

��

��

��


SWITC

HES

PHDV1

This switch provides the ability to identify a single position. Solid-state sensing technology provides a highly reliable switch. Elliptical housing allows for easy “drop-in” installation. Includes LED indicator for convenient means of positioning. Available with PNP or NPN output. Available with cable or 8 mm threaded Quick Connect.

SERIES JC1SD MAGNETIC SWITCH

DIMENSIONS: SERIES JC1SD STANDARD SWITCHES

ENGINEERING DATA: SERIES JC1SD STANDARD SWITCHES

63549-xx CORDSET

HS1(SIZE 35 & 46)(SIZE 58 & 75-SWITCH HOUSINGDOES NOT PROTRUDEBELOW SURFACEOF GRIPPER)

HS3

SWITCH ON OPEN

7.0[18.0]

PART NO.JC1SDP-5JC1SDP-KJC1SDN-5JC1SDN-K


NPN (Sink), Solid State, 10-30 VDC, 5 meter cableNPN (Sink), Solid State, 10-30 VDC, Quick Connect

MATCHING CORDSETPART NO.63549-0263549-05

DESCRIPTIONM8, 3 pin, Straight Female Connector, 2 meter cableM8, 3 pin, Straight Female Connector, 5 meter cable

mm5.63.2

LETTERDIMHS1HS3

in.220.125

GRK-x-35 X 6.5 or 12MODEL NUMBER

GRK-x-46 X 8 or 16 GRK-x-58 X 10.5 or 20 GRK-x-75 X 12.5 or 26mm.4

10.9

in.015.430

mm

16.3

in

.640

mm

21.6

in

.850

JC1SDx-5

JC1SDx-K (Quick Connect)

M8 x 1

MIN

196.85[5 m]

.984[25]

.140[3.6]

1.349[34.3]

9.250[234.0]

SPECIFICATIONS JC1SDP-x JC1SDN-xOPERATING PRINCIPLE Solid State Detection of Moving MagnetINPUT VOLTAGE 10 - 30 VDCOUTPUT TYPE PNP (source) NPN (sink)OUTPUT CURRENT 100 mA max., Short Circuit ProtectionVOLTAGE DROP 2.5 VDCSWITCH BURDEN 8 mAENVIRONMENTAL IP67OPERATING TEMP. -25 C to 75 C

.111[2.8]

.984[25]

.140[3.6]

.111[2.8]

MIN

PIN 2/4WIRE COLOR

BLACK


PIN 3WIRE COLORBLUE .402

[10.2]

.689[19.3]

1.299[34.8]

STANDARD

63549-xx CORDSET

HS1(SIZE 35 & 46)(SIZE 58 & 75-SWITCH HOUSINGDOES NOT PROTRUDEBELOW SURFACEOF GRIPPER)

HS3

SWITCH ON OPEN

7.0[18.0]

PART NO.JC1SDP-5JC1SDP-KJC1SDN-5JC1SDN-K


NPN (Sink), Solid State, 10-30 VDC, 5 meter cableNPN (Sink), Solid State, 10-30 VDC, Quick Connect

MATCHING CORDSETPART NO.63549-0263549-05

DESCRIPTIONM8, 3 pin, Straight Female Connector, 2 meter cableM8, 3 pin, Straight Female Connector, 5 meter cable

mm5.63.2

LETTERDIMHS1HS3

in.220.125

GRK-x-35 X 6.5 or 12MODEL NUMBER

GRK-x-46 X 8 or 16 GRK-x-58 X 10.5 or 20 GRK-x-75 X 12.5 or 26mm.4

10.9

in.015.430

mm

16.3

in

.640

mm

21.6

in

.850

JC1SDx-5

JC1SDx-K (Quick Connect)

M8 x 1

MIN

196.85[5 m]

.984[25]

.140[3.6]

1.349[34.3]

9.250[234.0]

SPECIFICATIONS JC1SDP-x JC1SDN-xOPERATING PRINCIPLE Solid State Detection of Moving MagnetINPUT VOLTAGE 10 - 30 VDCOUTPUT TYPE PNP (source) NPN (sink)OUTPUT CURRENT 100 mA max., Short Circuit ProtectionVOLTAGE DROP 2.5 VDCSWITCH BURDEN 8 mAENVIRONMENTAL IP67OPERATING TEMP. -25 C to 75 C

.111[2.8]

.984[25]

.140[3.6]

.111[2.8]

MIN

PIN 2/4WIRE COLOR

BLACK


PIN 3WIRE COLORBLUE .402

[10.2]

.689[19.3]

1.299[34.8]

JC1SDP-K & JC1SDN-K 63549-XX

JC1SDP-5 & JC1SDN-5

JC1SDN-x JC1SDP-x

SWITC

HES


APPLICATIONS: SERIES JC1 STANDARD SWITCHES

Series JC1SD Magnetic Switches replace the old style Series 6790 DC Switches and can be used on all standard PHD Components listed.

• GRIPPERS: Series GRK, EGRK, GRB, GRF (JC1SD only), & GRS (JC1SD only)• ROTARY ACTUATORS: Series RI, RCC• SLIDES: Series SFP, SFM, SHP, STP, SIP, SMx, & SxL, SxH• CYLINDERS: Series CRS & CTS

Series SIP

Series GRF (JC1SD only)

Series SxH

Series CTS

Series SFM, SFP

Series SHP

Series GRB

Series STP

Series RI

Series RCC

Series CROld Series 6790Switch

Series GRS (JC1SD only)

Series GRK


SWITC

HES

PHDV1

DC INDUCTIVE PROXIMITY SWITCHES4 mm ROUND

PART NO.18430-001-0218430-002-02

DESCRIPTIONNPN (Sink) 10-30 VDC, 2 meter cablePNP (Source) 10-30 VDC, 2 meter cable

2 meter cordset for all Series 5580 Switches with QuickConnect. Other cable lengths available - contact PHD.

6 mm SQUARE

PART NO.18431-001-0218431-002-02



8 mm THREADED

PART NO.51422-005-0251422-006-02



BENEFITS■ High reliability provided by solid state inductive sensing

technology.

■ Ease of mounting with PHD’s Proximity Switch Bracket Kit and Target Kits for grippers. These kits include all hardware for mounting the switch and the target that is used to actuate the switch. (See Slide and Gripper sections for details.)

■ Suitable for plant environments where dirt and contamination create difficulties for electromechanical and other types of switches.

■ LED indicator circuits are standard on 4 mm round, 6 mm square, and 8 mm threaded and provide a convenient means of positioning and troubleshooting.

18430-001-02 18430-002-02SPECIFICATIONS 18431-001-02 18431-002-02 51422-005-02 51422-006-02INPUT VOLTAGE 10 to 30 VDC 10 to 30 VDC 10 to 30 VDC 10 to 30 VDCOUTPUT TYPE NPN (Sink) PNP (Source) NPN (Sink) PNP (Source)SENSING RANGE 0.8 mm Max. 0.8 mm Max. 1.5 mm Max. 1.5 mm Max.OUTPUT CURRENT RATING 100 mA. Max. 100 mA. Max. 200 mA. Max. 200 mA. Max.SWITCH BURDEN 10 mA. Max. 10 mA. Max. 10 mA. Max. 10 mA. Max.VOLTAGE DROP 2.5 VDC Max. 2.5 VDC Max. 1.0 VDC Max. 1.0 VDC Max.CIRCUIT PROTECTION Yes Yes No NoREVERSE VOLTAGE YesOUTPUT STATE Normally OpenENVIRONMENTAL IP67

15561-00110 to 30 VDCNPN (Sink)

1.6 mm Max.200 mA Max.8 mA Max.1.5 V Max.

Yes

15561-00210 to 30 VDCPNP (Source)1.6 mm Max.200 mA Max.8 mA Max.1.5 V Max.

YesYes

Normally OpenIP68

15561-00320 to 250 VAC

Solid State1.6 mm Max.130 mA Max.

—11 V Max.

No

BLACK

BROWN

BLUE

LOAD

SWIT

CH

DC

DC

MODEL 15561-00118430-001-0218431-001-0251422-005-02

BLACK

BROWN

BLUE

LOAD

SWIT

CH

DC

DC

MODEL 15561-00218430-002-0218431-002-0251422-006-02

WIRING SCHEMATICS

BROWN

BLUESWIT

CH

NEUTRAL

LINE

LOAD

ACMODEL 15561-003

DC NPN (Sink) DC PNP (Source)

12 mm THREADED

PART NO.15561-00115561-00215561-003

DESCRIPTIONNPN (Sink) 10-30 VDC, 3 meter cablePNP (Source) 10-30 VDC, 3 meter cable20-250 VAC, 3 meter cable

SWITC

HES


SERIES 62002 8 mm ROUND THREADED PROXIMITY SWITCH

SERIES 62002 SWITCHES

SERIES 62002 PROXIMITY WIRING SCHEMATICS

BROWN

BLUE

LOAD

SWIT

CH

DC

DC

MODEL NO. 62002-1-02 - NPN (SINK) OR PNP (SOURCE)INPUT - 4.5-24 VDCPOWER CAPACITY - 1.0 WATT MAX.LOAD CURRENT - 40 mA MAX.

CABLED MODEL 62002 - PNP (SOURCE) CABLED MODEL 62002 - NPN (SINK)

BROWN

BLUE LOADSWIT

CH

DC

DC

SPECIFICATIONS 62002-1-02OPERATING PRINCIPLE Magnetic ReedACTUATED BY Target MagnetINPUT VOLTAGE 4.5 to 24 VDCOUTPUT VOLTAGE Contact ClosurePOWER CAPACITY 1.0 Watt Max.CURRENT RATING 40 mA Max.CONTACT RESISTANCE .200 Ohm Max.ENVIRONMENTAL IP67OPERATING TEMP. 0� to 70�C

PART NO.62002-1-02

DESCRIPTION8 mm Threaded Reed Switch with 2 meter cable

1.075[27.31]

2x .160[4.1]

.085[2.16]

2x .265[6.73]

(M8 x 1.0-6g THREAD)

M8 HEX NUT (2 SUPPLIED)

LED IN THIS APPROX LOCATION

.220[5.59]

.984 � .080[25 � 2.03]

.59[14.99]

.51[12.95]

.795[20.19]

.990[25.15]

74.74 � .79[1900 � 20]

.276 � .040[7 � 1]




SWITC

HES

PHDV1

BENEFITS

■ Provides independent and fully adjustable multiple position sensing on Series 8400 Angular Grippers, Series 190 & 191 Parallel and 190 Angular Grippers, Series 5300 Oval Grippers, and all Rotary Actuators and Multi-Motion Actuators.

■ Independent adjustment of two set point positions from two sensors allows one set point module to interface with two actuators. Or, can be used with a single unit providing 4 adjustable set points throughout jaw travel or rotation.

■ Solid state electronics with Hall Effect sensing technology for an infinite number of trouble-free cycles.

■ Wide signal range capability permits interfacing with most programmable controllers and other logic systems.

■ LED indicators for visual confirmation of each output state.

■ Set Point Module is available for either current sinking or current sourcing models with 4.5 to 24 VDC output capability.

BENEFITS: HALL SENSOR WITH SET POINT MODULE

SPECIFICATIONS 9800-01-0300 9800-01-0400OPERATING PRINCIPLE Linear Hall EffectINPUT VOLTAGE 18 to 24 VDCOUTPUT TYPE NPN (Sink) PNP (Source)

Open Collector Collector OutputOUTPUT VOLTAGE 4.5 to 24 VDCOUTPUT CURRENT RATING 200 mA. Max.OUTPUT VOLTAGE DROP .4 VDC Max. .5 VDC Max.

at Rated Current at 50 mA.SWITCH BURDEN 150 mA. Max.OPERATING TEMP. 0° to 60°C (32° to 140°F)HUMIDITY 5 to 95% (NON CONDENSING)

ORDERING DATA: HALL SENSOR WITH SET POINT MODULE

DUAL INPUT SET POINT MODULEPART NO.

9800-01-03009800-01-0400

DESCRIPTIONNPN (Sink) 4.5-24 VDCPNP (Source) 4.5-24 VDC


HALL SENSOR KITFOR SERIES 190, 191, & 8400 MINIATURE GRIPPERS

DESCRIPTIONSize 6 Models 19x60, 19x61, & 19x62 ParallelSize 7 Models 19x70, 19x71, & 19x72 ParallelSize 8 Models 19x80, 19x81, & 19x82 ParallelSize 9 Models 19x90, 19x91, & 19x92 ParallelSize 0 Model 19x02 AngularSize 1 Model 19x12 AngularSize 2 Model 19x22 AngularSize 3 Model 19x32 Angular8400 Gripper Angular8410 Gripper Angular8420 Gripper Angular8430 Gripper Angular

PART NO.IMPERIAL METRIC18674-04 18057-0418675-04 18058-0418676-04 18059-0418677-04 18060-04

— 18057-04— 18058-04— 18059-04— 18060-04

10906-12 —10907-12 —10908-12 —18686-04 —

HALL EFFECT SENSOR/TRANSDUCERThe Sensor/Transducer must be ordered as part of the Gripper

or Actuator assembly. The Sensor/Transducer will be mounted to the unit with a transition plate. See individual unit Ordering Data for availability and ordering information. Individual replacement sensors are avai lable as shown.

APPLICATIONSGRIPPERS■ Provides two adjustable sensing positions throughout jaw

travel for two grippers (through a single set point module).

■ Allows the assurance of part presence by ensuring the jaws have closed or opened to the proper size.

■ Permits “go, no go” type gauging to occur as parts are gripped.

ROTARY ACTUATORS & MULTI-MOTION ACTUATORS■ Provides two adjustable sensing positions throughout

the 180° rotation of two rotary actuators or multi-motion actuators.

■ Can be used to signal ends of rotation of two units.

INDIVIDUAL REPLACEMENT SENSORSPART NO.

10688-2-12

10832-1-1-12

DESCRIPTIONSensor for all 8600, 7900, and 5300 Angular Grippers, and 8600 Parallel GrippersSensor for all Rotary Actuators and Multi-Motion Actuators

NOTE: All sensors come with 12 ft [3 m] minimum of shielded cable.

SWITC

HES


10688-2-012 BASIC HALL SENSOR

SERIES 7900, 8600 3-JAW, & 5300 ANGULAR GRIPPERS GRIPPER

MODEL NO.792x, 862x, & 1532x793x, 863x, & 1533x794x, 864x, & 1534x795x, 865x, & 1535x

A.854 [21.5].917 [23.5]

1.112 [28.5]1.586 [40.5]

B1.257 [32.0]1.540 [39.0]1.945 [49.5]2.500 [63.5]

LETTER DIMENSIONC

0.00 [0.0].122 [3.0].247 [6.0].441 [11.0]30°

B

A C

2X THRU HOLEFOR #6 SCREWS

.625 [28.5]

.125[28.5]

.375[9.5]

.500 [13.0]

1.125[28.5]

12 FT [4 m] OF SHIELDEDCABLE IS INCLUDED WITH SENSOR

.237 [6.0]

.246[6.0]

SERIES 190 & 191 PARALLEL GRIPPERS

GRIPPERMODEL NO.

19x6x19x7x19x8x19x9x

A1.437 [36.5]1.555 [39.5]1.810 [46.0]2.283 [58.0]

B.650 [16.5].550 [14.0].295 [7.5].295 [7.5]

LETTER DIMENSIONC

.787 [20.0]

.985 [25.0]1.496 [38.0]1.968 [50.0]

C

.375[9.5]

.187[5.0]

A

B

A

.375[5.0] .187

[9.5]

C

B

GRIPPER MODEL NO.IMPERIAL METRIC

840x 19002841x 19012842x 19022843x 19032

A1.354 [36.5]1.454 [39.5]1.704 [46.0]2.237 [58.0]

B.654 [16.5].554 [14.0].304 [7.6].300 [7.6]

LETTER DIMENSIONC

.700 [20.0]

.900 [25.0]1.400 [38.0]1.910 [50.0]

SERIES 8400 & 190 ANGULAR GRIPPERS

DUAL INPUT SET POINT LOGIC EXAMPLE

Both gripper jaws are wide open. No setpoints are made.

The jaws of gripper A are closed to grip apart and are wide open on gripper B. Oneset point is made for gripper A.

Both gripper jaws are closed to grip a part.Two set points are made, one for gripper Aand one for gripper B.

Gripper A jaws are closed all the way (noparts) and Gripper B jaws are closed to gripa part. Two set points for gripper A and oneset point for gripper B are made.

Both gripper jaws are closed all the way (noparts). Two set points are made for bothgrippers A and B.

In the event one gripper is wide open (A)and the other is closed all the way (B), onlythe two set points for the closed gripperwould be made.

CASE 1 CASE 2 CASE 3 CASE 4

CASE 5 CASE 6

A B A B A B A B

A BA B CASE123456

SET POINT OUTPUTA1011110

A2000110

B1001111

B2000011

DIMENSIONS: HALL SENSOR & SET POINT MODULE



SWITC

HES

PHDV1

DIMENSIONS: HALL SENSOR & SET POINT MODULE


SERIES 1000-8000 ROTARY ACTUATORS & MULTI-MOTION ACTUATORS

ACTUATORSERIES

1000 & 20003000 & 40005000 & 60007000 & 8000

A2.980 [75.7]4.230 [107.4]4.980 [126.5]7.980 [202.7]

B2.000 [50.8]3.000 [76.2]4.000 [101.6]5.000 [127.0]

LETTER DIM.

3 m SHIELDED CABLE FROM THIS SIDEON SERIES 1000 & 2000 UNITS ONLY

B

.500 [12.7]

3 m SHIELDED CABLE FROM THIS SIDEON SERIES 3000-8000 UNITS

LIMITATIONS: SENSOR MAY BE USED ON UNITS WITH MAXIMUM ROTATION UP TO AND INCLUDING 180°

A

MODEL 9800-01-0300NPN (SINK)

MODEL 9800-01-0400PNP (SOURCE)

BLACKCOMMON

18-24 VDCPOWER SUPPLY

INPUT TOPROGRAMMABLECONTROLLER

BLAC

K

RED

RED

WHITE

WHITE

OUTPUTS A1 & A2

OUTPUTS B1 & B2

123456789

10

BLACKCOMMON

PRIMARYSUPPLY

INPUT TOPROGRAMMABLECONTROLLER

RED

WHITE

WHITE

OUTPUTS A1 & A2

OUTPUTS B1 & B2

123456789

10

A

B

A

B

OPTIONAL -REQUIRED ONLY IF

DESIRED SOURCEOUTPUT VOLTAGE IS

OTHER THAN THATOF PRIMARY SUPPLY

IF OUTPUT VOLTAGEREQUIRED IS THESAME AS THE PRIMARYSUPPLY ATTACH AJUMPER BETWEENTERMINALS 1 & 10

18-24 VDCPOWER SUPPLY

BLAC

K

RED

ENGINEERING DATA: HALL SENSOR WITH SET POINT MODULE

WIRING SCHEMATICSDiagrams are typical for many programmable

controller interface applications. Modules may also be used to signal TTL. CMOS, relays or solenoids within rated electrical specifications.

NOTE: For single applications where four outputs are desired, install a jumper between terminals 4 & 5.

SET POINT MODULE #9800-01-0x00

+ 18 - 24 VDC

-0 VDC

TRNS POS

TRNS SIG A

TRNS SIG B

OUTPUT A1

OUTPUT A2

OUTPUT B1

OUTPUT B2

+ 4,5-24VDCSOURCEONLY

3.470 [88.0]

.270[7.0]

.905[23.0]

2.190[55.6] 3.720

[94.5]

.490[12.5]2.220 [56.5]

4X SET POINT MADELED INDICATORS

4X THRU HOLE FOR#8 [M4] SCREW

.140 [3.5]

4.000[101.5]

.750[22.0]

.220[5.5]

4X SET POINTADJUSTMENT

.295[7.5]

3.410[86.5]



SWITC

HES


BENEFITS & DIMENSIONS: BRACKETS FOR NFPA CYLINDERS

BENEFITS■ Allows PHD Series 1750 Reed and Hall Effect

Switches to be mounted to 1-1/2" [38.1 mm] to 8" [203.2 mm] bore NFPA Cylinders.

■ The brackets’ flexible design means only two brackets are required to cover 8 sizes of NFPA Cylinders.

■ The extruded aluminum bracket attaches securely to a single tierod and does not allow the switch to pull away from the cylinder barrel.

■ The low profile of the switch and bracket saves space and provides additional mounting flexibility.

■ Optional strain relief clamp may be used to protect the switch cable from damage at the switch due to flexing.

PART NO.17509-3-0617502-2-0617529-317522-217503-2-0617504-2-0617523-217524-2

DESCRIPTIONAC ReedDC ReedAC Reed, Quick ConnectDC Reed, Quick ConnectHall Effect NPN (Sink)Hall Effect PNP (Source)Hall Effect NPN (Sink), Quick ConnectHall Effect PNP (Source), Quick Connect

NFPA CYLINDERBORE

1-1/2, 2, 2-1/2,3-1/4, & 4

5, 6, & 8

SWITCH BRACKETNUMBER

17000-51-0

17000-57-0

STRAIN RELIEFBRACKET

18412

18412

PHD SWITCH MODELS

See pages 9-16 to 9-18 for switch information. NFPA cylinder must have the proper magnetic piston for the PHD Switchesto function correctly.

17000-xx-0 NFPA SWITCH BRACKET18412 CABLE RESTRAINT KIT

1.000[25.4] LED INDICATORA REF

C SQ REF

B REF

OPTIONAL CABLERESTRAINT BRACKET

D REF DIA

BORESIZE1-1/2

22-1/23-1/4

4568

A1.3751.5001.7502.0002.3753.0003.3754.000

B1.5001.7501.8752.1872.5003.1253.3754.125

LETTER DIMENSIONC

2.0002.5003.0003.7504.5005.5006.5008.500

D.250.312.312.375.375.500.500.625

PART NO.17502-2-0617509-3-0617503-2-0617504-2-06

DESCRIPTIONDC Reed NPN/PNP (White)AC Reed (Green)Solid State NPN (Yellow)Solid State PNP (Red)

PHD SWITCH MODELS


536 0 2-2 02 - phd's online litstore

Documents