7thngn-wg 009 test cases proposal and description of ngn testbed

Upload: rashidkhan

Post on 13-Jan-2016

219 views

Category:

Documents


0 download

TRANSCRIPT

  • Test cases proposal and description of NGN Testbed

    Xueli [email protected]

    CJK 7th NGN-WG MeetingOct10-11, Tokyo, Japan

  • CCSA CJK Testbed Team List

  • RTNets CS Architecture

  • RTNets CS Architecture 1. SoftX3000, the Softswitch equipment, which fulfill call control, access control of media gateway, distribute resources, process the protocol, routing and accounting, etc. SoftX3000 provide API for the third part applications, and use SIP or SIP-I protocol with other softswitch. The IP address of SoftX3000 is 172.24.253.30. The phone numbers of those in SoftX3000 are 9200XXXX. 2. iOSS , integrated Operation Support System, which includes integrated network management system for NGN equipment managing and accounting system.3SCP, Service Control Point, which is the core of the intelligent network, and store user data and service logic, control SSP for service action.4MRS6100, Media Resource Server, process media for services, such as, provide service tone, IVR, some advanced audio service, etc. 5U-NICA, the Application Server, which responsible for the logic creation and management of those value-added service and intelligent network service, the Application Server can provide API for a third part development. 6SG7000, Signaling Gateway, which fulfills transformation between No.7 signaling in PSTN and signaling in IP network (such as SIGTRAN).

  • RTNets CS Architecture 7USAU, Universal Signaling Access Unit, which makes signaling transformation, especially transformation between INAP and corresponding signaling in IP network. 8UMS N2000, the integrated network management system. 9Eudemon2100, the session border controller, help signaling and media message traverse NAT and firewall. 10UMG8900, Universal Media Gateway, which is mainly a trunking gateway, with SG and AG function inside. The encoding and decoding arithmetics UMG8900 supported are G.711, G.723.1, G.726, G.729.11UA5000, an integrated access device, which provides interfaces to different kinds of users, such as analog users, ISDN users, xDSL users, etc.12IAD, Integrated Access Device, access data, audio and video services to IP network for user, and support G.711 arithmetic.13openEye, which is a SoftPhone using SIP protocol, and support G.711, H.261 and H.263 arithmetic.

  • Test Cases ProposalSIP and PSTN user are the common part for CCSA RTnet and ETRIBasic voice call SIP phone SIP phone Normal callAbnormal call-the called party is busyAbnormal call- no answerAbnormal call- the number doesnt existPSTN user SIP phone Normal callAbnormal call-the called party is busyAbnormal call- no answerAbnormal call- the number doesnt existMultimedia callSIP phone SIP phone

  • Test description

    TEST NUMBER:

    TITLEBasic Call between SIP users

    SUBTITLE normal call

    PRE-TEST CONDITIONS

    1SIP user 1 registered on SS1; SIP user 2 registered on SS2.

    TEST CONFIGURATIONSIP1SS1SS2SIP2

    TEST STEP

    1User1 calls user2user2s phone rings

    2User2 answers the call

    3User1 hangs up first,then user2 hangs up,too.

    EXPECTED SIGNAL SEQUENCE:

    (1)SIP user1 sends an INVITE request to SS1 to setup a sessionSS1 responses 100 Trying.SS1 forwards the INVITE request to SS2 then to user2.

    (6) SIP user1 rings .User 2 sends a 180Ringing response to SS2,SS2 forwards this message to SS1 then to user1.

    (9)User2 answers the call ,User 2 sends a 200 OK response to SS2 then to User1.

    (10)User1 sends ACK back.

    User1 and user2 setups a multimedia session.

    _1214303506.vsd

  • Test description Voice Codec G.711, G.729A, G.723.1 Codec Characteristicso. G.711(u/a)- payload type : 0/8- clock rate : 8000- ptime : 20o. G.729A- payload type : 18- clock rate : 8000- ptime : 20o. G.723.1- payload type : 4- clock rate : 8000- ptime : 30

  • Test description Video Codec H.263/CIF, H.263/QCIF Codec Characteristicso. H.263/QCIF- payload type : 34- frame size : 176*144- clock rate : 90000 60000- frame rate : 3~30o. H.263/CIF- payload type : 34- frame size : 352*288- clock rate : 90000- frame rate : 3~30 Video data is required to be transmitted according to the negotiated value of the quality (bandwidth, frame rate, etc.)

  • Test description Video Related SDP Specification The following video related attributes are mandatory.o. Media Type- Format: m=video RTP/AVP - Reference : RFC2327o. RTP map- Format: a=rtpmap: /- Reference : RFC2327o. Bandwidth - Format: b=:- Reference : RFC2327o. Framerate - Format : a=framerate:- Reference : RFC2327o. Framesize - Format: a=fmtp: =[, ,]- Reference : draft-ietf-avt-rfc2429-bis-09 bandwidth is represented per medium Framerate in RFC2327 precedes that of draft-RFC2329-bis-09Route/Record-Route Header Record-Route header is Optional