ODES 800-4 Dominator Assembly Manual.

Here is what your unit should look like in the box.

Step 1. Take the box off the crate.

Step 2. Take the top of the crate off and take out all the parts.

Step 3. Take the crate support bars off the utv and take the bottom crate off the unit.

Step 4. Put the shocks on the utv.

Step 5. Mount the wheels to the utv.

Step 6. Mount the top roll cage bars to the utv.

Step 7. Mount the seat belts to the frame.

Step 8. Mount the steering wheel.

Step 9. Mount the window, install the rubber grommets, then mount the window to the frame using the clips.

Step 10. Install the roof. Drill the holes through the front of the roof to mount the bolts through the window and roof.

Step 11. Perform a full PDI on the UTV.