99811676, optical broadband platform - kathrein fibre optique.pdf · • optical broadband platform...
TRANSCRIPT
OpticalBroadband Platform
NEW: Active and passive
RFoG components
• Optical broadband platform for up to 16 modules
• Fitted with 2 redundant power supply and cooling fan units
• Wide selection of optical transmitters, amplifi ers and return path receivers
• All optical and electrical connections are on the rear panel. Test sockets are on the front panel
• Can be integrated in any HMS-conform monitoring system
• Pluggable control panel with LC display, LEDs and input keys
• Tuning and management also via web browser
• RS 485 remote monitoring and control interface
• Several optical broadband platforms can be managed using just one controller module
• Automatic redundant operation of adjacent modules
• High reliability due to dust-proof modules and large cooling ribs
• Models available for mains voltage (100 ... 240 VAC) and direct voltage (36 ... 72 VDC)
• Design: 19” racking, 4 height units (RU)
Kathrein's KOBRA system offers a compre-hensive broadband platform meeting all the requirements of optical transmission. A wide range of optical transmitters, amplifi ers and return path receivers is complemented by individual units in 19” design.
The foundation is based on the 19” broad-band platform KBP 4000R, into which a total of 16 modules can be inserted. It is already equipped with two redundant power sup-ply and fan units ensuring reliable operation. The product package additionally includes a pluggable control panel with LC display, status LEDs and input keys.
A power bus system in the rear section of the platform enables direct module connection to the 24 VDC supply voltage, to the RS 485 remote supervision and control interface as well as to control panel management. The broadband platform is designed as a 4 RU module carrier and can also be adapted to ETSI cabinets.
Optical Broadband Platform
2
The net element controller module Ethernet (NCM 10) plays the leading role in this func-tion. This unit establishes the connection between the control panel and all plugged-in modules via the RS 485 bus. The NCM 10 can thereby control up to three full KBP 4000R or 4048R broadband plat-forms.
On the other hand, it converts the RS 485 data to SNMP/Ethernet and web browser/ Ethernet protocol. Thus, all settings and queries can be carried out via PC with a web browser. In addition, it is possible to integrate the broadband platform in any HMS-com-patible monitoring system such as the KOM system from Kathrein.
Together with the Kathrein optical compact receivers, the KOBRA can be used to set up an optical distribution system that meets each and every requirement. Modular design and a broad product programme make it possible to design anything cost-effectively, from simple optical feeds to classic HFC structures and video distribution in FTTH networks.
Kathrein are continually enhancing their products and expanding their product range. Additional product variants are available upon request.
For use in hubs, for example, the remotely fed broadband platform 48 VDC variant (KBP 4048R) can also be used.
Extensive management and monitoring facili-ties allow fl exible and reliable operation in any net confi guration. The provided plugga-ble control panel enables all required settings to be made on inserted devices.
3
Functional and reliable - the "optical broadband
The optical broadband platform KOBRA is designed with a sophisticated operation and management concept. The central element is the net element controller Ethernet 'NCM 10'. This module provides the interface to the rear RS 485 bus to which all platform modules are connected. In addition, it estab-lishes the connection to external manage-ment systems, e.g. via web browser, or monitoring systems, such as HMS monitor-ing systems.
Ultimately, it enables local setting of all parameters through the control panel with display and input keys. Decentralized data storage in each individual module allows independent operation (without the controller module) after start-up.
Slim modules, some with dual functions (e.g. return path receiver), ensure high func-tional density. Minimal space requirement increases cost-effectiveness and makes later upgrading easier.Despite their high output power, the optical amplifiers only require two or three slots.
All test sockets are located on the front panel. This guarantees easy access for tests or measurements.
The optical and RF interfaces are located on the rear panel of the platform, simplifying cabling in 19” racks.
4
Gerät 16
platform " in detail
Redundant power sup-ply units, each equipped with double fan units, ensure high reliability. If service is required, the power supply units can even be exchanged under operational condi-tions (hot-pluggable).
Ample cooling ribs guarantee long endur-ance of all active components. An addi-tional advantage is the dust-proof design of all components.
The cooling air only flows along the cooling ribs and not through the modules them-selves. Disturbances due to dust and dirt are therefore practically ruled out.
5
6
19" broadband platform for optical modules
• Up to 16 modules can be inserted into the broadband platform• Fitted with 2 redundant power supply and cooling fan units• Power supplies can be exchanged under
operation• Plug-in controller with LC display, status LEDs and input keys• Bus for: - 24 VDC module power supply - RS 485 remote monitoring and control interface - Controller management• Models available for 100 ... 240 VAC and 48/60 VDC powering• Automatic recognition of inserted modules• Design: 19" racking, 4 height units (RU)• Can be adapted to ETSI defi ned cabinets
Note:
The net element controller module Ethernet NCM 10 is required if modules are to be tuned to other settings and for monitoring purposes
KBP 4000R 25010022KBP 4048R 25010021
Type KBP 4000R KBP 4048R
Order no. 25010022 25010021
Input voltage range V AC: 100-240 DC: 36-72
Input voltage W < 240 < 240
Max. input power of inserted modules W < 192 < 192
Dimensions (W x H x D) mm 483 x 102 x 476 483 x 102 x 476
Weight kg 12 12
7
Net element controller module Ethernet
• For management and monitoring of active modules in the 19" broadband platform KBP 40xx• Conversion of RS 485 data to SNMP/ Ethernet and Web browser/ Ethernet protocol• Interface to displays and input keys on the front panel• Automatic recognition of all modules connected to the RS 485 bus• Ethernet interface 10/100 Mbit/s for SNMPv1 and Web server• Flash micro-controller technology for rapid and simple software updates via Ethernet interface• LEDs for status display• Low power consumption
Note:
Up to three KBP 40xxR broadband platforms can be managed and monitored by one NCM 10 module
NCM 10 26210079
Type NCM 10
Order no. 26210079
Power consumption W 2.5
LAN/WANTCP/IP
Ethernet
NCM 10
Module
#2
Module
#3
Module
#17
Module
#18
Module
#19
Module
#32
Module
#33
Module
#34
Module
#35
Module
#48
μP
RJ 4
5 Ca
ble
RJ 4
5 Ca
ble
RJ 4
5 Ca
ble
Module
#16
KobraBroadband
Platform#3
KobraBroadband
Platform#2
KobraBroadband
Platform#1
I/O
RS 485
RS 485
RS 485
Inputkeys
LCDisplay
Block diagram
8
Directly modulated broadcast transmitters,
1310 nm, extremely linear
• Opto-electrical conversion of forward path signals• Extremely linear, low-noise laser with predistortion technology• Optical output power between 3 and 14 dBm• Adjustable optical output level, 0 to -3 dB (relative)• Active narrowcast input (NC) with high
decoupling to the broadcast signal (BC)• Electronic tuning elements for attenuation, slope, output level, Optical Modulation Index (OMI) etc.• Automatic load control for constant OMI• RS 485 interface• Optical interfaces: E-2000, 0.1-dB-type
(other connectors on request)• Test socket for input signal• Test socket for RF signal in front of the laser diode
OTA 1303X2-E 24610353OTA 1305X2-E 24610354OTA 1308X2-E 24610355OTA 1311X2-E 24610356OTA 1313X2-E 24610357OTA 1314X2-E 24610358
Block diagram
9
TypeOTA
1303X2-E
OTA
1305X2-E
OTA
1308X2-E
OTA
1311X2-E
OTA
1313X2-E
OTA
1314X2-E
Order no. 24610353 24610354 24610355 24610356 24610357 24610358
Nominal output level optical dBm 3 5 8 11 13 14
Optical wave length nm 1310
Optical output level range (relative)
dB 0 to -3
Optical return loss dB > 45
RF frequency range MHz 5-1000
Nominal input level (5 % OMI, Broadcast)
dBμV 80
Nominal input level (5 % OMI, Narrowcast)
dBμV 87
Level range (BC), in relation to nominal input level, electronically settable
dBμV 73 … 97
Slope range (BC), electronically settable
dB -3 ... +16
Level range (NC), electronically settable
dBμV 80 … 92
Decoupling between BC and NC input
dB > 50
CSO (CENELEC 42, 0 dBM at node) dB 68
CTB (CENELEC 42) dB 69
Return loss at 47 MHz dB 20 -1.5/oct., > 15
Return loss 5-65 MHz dB > 18
Impedance Ω 75
Power consumption (operation) W 12
Power consumption (stand-by) W 4
Weight kg 1.3
10
Externally modulated transmitters
• Electro-optical conversion (externally modulated) of AM-VSB/QAM forward path signals• Designed for operation with optical amplifi ers (EDFAs/ YEDFAs)• Excellent parameters enable design of optical distribution systems over 100 km in length• Very low-noise, narrow-band DFB laser• Optical modulator with 2 optical outputs• Automatic RF gain control: CW carrier, video or manual• Settable SBS threshold up to 19 dBm• Wave lengths: 1550 nm or 1558.98 nm in ITU-DWDM channel plan (ITU channel 23)• Tunable wave length up to ± 100 GHz• Additional ITU wave lengths on request• Optical interface: E-2000, 0.1 dB-type
(other connectors on request)• Settable slope• RF test output with 20 dB tap loss• OTA 1585X-E-SAT transmits the CATV frequency band (AM-VSB, FM, QAM) and the SAT-IF frequency band (analogue, DVB-S/ DVB-S2)
OTA 1585X-E 24610361OTA 1585D23X-E 24610362OTA 1585X-E-SAT 24610363
Block diagram
11
Type OTA 1585X-E OTA 1585D23X-E OTA 1585X-E-SAT
Order no. 24610361 24610362 24610363
Optical interface E-2000 E-2000 E-2000
Optical wave length nm 1550 + 10/- 2 ITU-T Ch 23 (1558.98 nm) 1550 + 10/- 2
Laser line width MHz 0.3 0.3 0.3
Optical output level dBm 2 x 8.5 2 x 8.5 2 x 8.5
Relative intensity noise (RIN) dBc/Hz -160 -160 -160
CATV
Input level per TV channel, nominal dBμV 80 80 80
Input level range per TV channel (AGC) dBμV 78 ... 96 78 ... 96 78 ... 96
Return loss at 47 MHz dB 20 -1.5/oct., > 15 20 -1.5/oct., > 15 20 -1.5/oct., > 15
Frequency range MHz 47-1000 47-1000 47-862
Frequency response 47-862 MHz dB < ± 0.75 < ± 0.75 < ± 0.75
Frequency response 862 MHz to 1 GHz dB < ± 1.5 < ± 1.5 < ± 1.5
Adjustment range slope dB -2 ... +8 -2 ... +8 -2 ... +8
CNR (CENELEC 42, without fi bre, 0 dBm at node)
dB 55.5 55.5 54.5 (52.5) 1)
CSO (CENELEC 42) dBc 65 65 64
CTB (CENELEC 42) dBc 65 65 63
Test socket dB -20 ± 1 -20 ± 1 -20 ± 1
RF interface F-type socket F-type socket F-type socket
SAT-IF
Frequency range MHz - - 950 ... 2605
Frequency response 950-2605 MHz dB - - < ± 2
Nominal input level per SAT-IF channel (OMI = 1 %)
dBμV - - 85
RMS input level range (ALC functional range)
dB - - -11 ... +5
Impedance ohms - - 75
Test output at OMI = 1 % dBμV - - 66 ± 2.5
CNR (Prx = 0 dBm, 36 QPSK carrier, no fi bre length)
dB - - > 27
Intermodulation spacing dB - - < -35
General
Power consumption W < 40 < 40 < 44
No. of required slots in KBP 40xxR 4 4 4
Weight kg 4.7 4.7 4.7
1) Value in brackets for CATV and SAT-IF application with 36 QPSK modulated SAT-IF signals with carrier frequencies in the range of 1000 … 2600 MHz
12
Directly modulated narrowcast downstream transmitters,
DWDM
• Electro-optical conversion of forward path signals• Extremely linear, low-noise DWDM laser with pre-distortion technology• Wave lengths according to DWDM ITU grid, adjustable ± 100 GHz• Optical output power: 11 dBm, cooled laser• Two RF inputs (low/high) for adaptation to different level conditions• Electronic tuning elements for attenuation, slope, output level, Optical Modulation Index, etc.• Automatic load control for constant Optical Modulation Index• RS 485 interface• RF interfaces: F-type sockets• Test socket for input level• Test socket for optical output level or RF signal
OTN 3111L-E 24610397OTN 3311L-E 24610213OTN 3511L-E 24610398OTN 3711L-E 24610399
Type OTN 3111L-E OTN 3311L-E OTN 3511L-E OTN 3711L-E
Order no. 24610397 24610213 24610398 24610399
Optical interface E-2000 E-2000 E-2000 E-2000
Optical wave length nm 1552.520 1550.920 1549.320 1547.720
Nominal optical output level dBm 11
Optical output level range dBm 8-11
Optical return loss dB > 45
RF frequency range MHz 5-1000
Input level for OMI = 5 % (low input) dBμV 73 … 97
Input level for OMI = 5 % (high input) dBμV 87 … 104
Attenuation range, electronically adjustable dB 0-24
Slope range, electronically adjustable dB -3 ... +16
Return loss at 47 MHz dB 20 -1.5/oct., > 15
Return loss 5-65 MHz dB > 18
Test socket (output) dB -20
Impedance ohms 75
Power consumption W 9
Block diagram
BCin a
μC
BCin b
13
Directly modulated twin transmitters, CWDM
OTD 06C11C12-E 24610393OTD 06C13C14-E 24610394OTD 06C15C16-E 24610395OTD 06C17C18-E 24610396
• Electro-optical conversion of forward path or return path signals• Low-noise laser• Optical output power: 2 x 6 dBm• Twin transmitters with two independent RF paths and two independent laser diodes• Electronic tuning elements for attenuation, Optical Modulation Index, etc.• Automatic load control for constant Optical Modulation Index• RS 485 interface for monitoring• Optical interface: E-2000, 0.1 dB-type• RF interfaces: F-type sockets• F-type test socket for input level
Block diagram
Type OTD 06C11C12-E OTD 06C13C14-E OTD 06C15C16-E OTD 06C17C18-E
Order no. 24610393 24610394 24610395 24610396
Optical interface E-2000
Optical wave lengths nm 1471 and 1491 1511 and 1531 1551 and 1571 1591 and 1611
Nominal optical output level dBm 6
Optical output level tolerance dB -1 … +2
Optical return loss dB > 45
RF frequency range MHz 5-1000
CNR with OMI = 3.9 %, Prx = 0 dBm, CENELEC dB 51
CSO with OMI = 3.9 %, Prx = 0 dBm, CENELEC dBc 62
CTB with OMI = 3.9 %, Prx = 0 dBm, CENELEC dBc 63
Input level for OMI = 5 % dBμV 75
Attenuation range, electronically adjustable dB 0-10
Transmitter decoupling 47 ... 862 MHz dB 55
Return loss at 47 MHz dB 18 -1.5/oct., > 15
Return loss 5-65 MHz dB > 18
Impedance Ω 75
Power consumption W 6
Test socket (output) dB -20
Weight kg 1.3
BCin1a
μC
BCin1b
BCin2a
BCin2b
14
• Broadband amplifier for universal use in forward and return paths• For use in the optical broadband platform KOBRA• Automatic load control
(can be switched off)• Frequency range: 5-1000 MHz• Gain: 0 ... 24 dB, electronically settable• Slope range: 0 ... 16 dB, electronically
settable• Main input for broadcast signals and secondary input for narrowcast signals• Test socket for output signal• Stand-by mode for low power consumption• RS 485 interface
TVO 1024 25110033
IN
CA1024
OUT
TP
μPRS485
ATT, EQ
IN (coupled)
IN OUT
TP
μPRS485
ATT, EQ
Block diagram
1) 14 dB directional coupler 2) CENELEC raster, 42 channels, fl at
Type TVO 1024
Order no. 25110033
Frequency range MHz 5-1000
Gain, electronically settable dB 0 to 24
Slope, electronically settable dB 0 to 16
Frequency response (7-870 MHz) dB ± 0.8
Frequency response (5-1000 MHz) dB ± 1.5
Input level narrowcast input 1), relative dB + 14
Max. output level 2), CSO > 60 dB, CTB > 60 dB dBμV 106
Return loss 5-65 MHz dB > 18
Return loss 47-1000 MHz dB 18 -1/oct., > 15
Noise fi gure 5-870 MHz dB 6.5
Noise fi gure 870-1000 MHz dB 7.5
Impedance Ω 75
Power consumption, operation W 8
Power consumption, stand-by W 1
Weight kg 1.3
Broadband amplifier, 5-1000 MHz
15
Directly modulated broadcast transmitter, 1550 nm
• Opto-electrical conversion of forward path signals• Low-noise laser with pre-distortion
technology• Optical output power: 8 dBm• Electronic tuning elements for attenuation, optical modulation index, slope, output power, prechirp, etc.• Automatic load control for constant Optical Modulation Index• RS 485 interface for monitoring• Optical interface: E-2000, 0.1 dB-type• RF interfaces: F-type sockets• F-type test socket for input level• SBS suppression and prechirp technology
OTA 1508X-E 24610401
Type OTA 1508X-E
Order no. 24610401
Optical interface E-2000
Optical wave length nm 1550
Nominal optical output level dBm 8
Optical output level tolerance dB ± 1.5
Optical return loss dB > 45
RF frequency range MHz 5-1000
CNR with OMI = 4.1 %, Prx = 0 dBm, CENELEC 1) dB 51
CSO with OMI = 4.1 %, Prx = 0 dBm, CENELEC 1) dBc 60
CTB with OMI = 4.1 %, Prx = 0 dBm, CENELEC 1) dBc 62
Input level for OMI = 5 % dBμV 73 … 97
Attenuation range, electronically adjustable dB 0-24
Return loss at 47 MHz dB 18 -1.5/oct., > 15
Return loss 5-65 MHz dB > 18
Impedance ohms 75
Power consumption W 9
Test socket (output) dB -20
Weight kg 1.3
Block diagram
1) 20 km fi bre, optical receiver with 0 dBm input power, lä=7pA/√Hz
16
Directly modulated broadcast twin transmitter, 1310 nm
OTD 1304X-E 24610391
• Opto-electrical conversion of forward path signals• Low-noise laser with pre-distortion
technology• Optical output power: 2 x 4 dBm• Twin transmitters with two independent RF paths and two independent laser diodes• Electronic tuning elements for attenuation, Optical Modulation Index, etc.• Automatic load control for constant Optical Modulation Index• RS 485 interface for monitoring• Optical interface: E-2000, 0.1 dB-type• RF interfaces: F-type sockets• F-type test socket for input level
Type OTD 1304X-E
Order no. 24610391
Optical interface E-2000
Optical wave length nm 1310 ± 20
Nominal optical output level dBm 4 each
Tolerance of optical output level dB -1 … +2
Optical return loss dB > 45
RF frequency range MHz 5-1000
CNR with OMI = 4.1 %, Prx = 0 dBm, CENELEC dB 51
CSO with OMI = 4.1 %, Prx = 0 dBm, CENELEC dBc 62
CTB with OMI = 4.1 %, Prx = 0 dBm, CENELEC dBc 63
Input level for OMI = 5 % dBμV 75
Attenuation range, electronically adjustable dB 0-10
Transmitter decoupling 47 … 862 MHz dB 55
Return loss at 47 MHz dB 18 -1.5/oct., > 15
Return loss 5-65 MHz dB > 18
Impedance Ω 75
Power consumption W 6
Test socket (output) dB -20
Weight kg 1.3
BCin1a
μC
BCin1b
BCin2a
BCin2b
17
Optical downstream receiver
• Opto-electrical conversion of downstream signals• Can be operated with one or two separate outputs• Redundant operation possible• Monitoring of the optical input power• Monitoring of the RF output level• Pilot-controlled• RS 485 interface for monitoring and control• Very low power consumption• Optical interfaces: E-2000, 0.1 dB-type; (other connectors on request)• Ultra low-noise frontend
ORM 10 DS-E 24710045
Type ORM 10 DS-E
Order no. 24710045
Optical interfaces E-2000
Optical wave length nm 1280-1610
Optical input level range dBm -8 to +4
Equivalent noise current density at -8 dBm pA/√Hz 5
Optical return loss dB > 45
RF frequency range MHz 47 … 870
RF output level at OMI = 4 % (1 output) dBμV 94
RF output level at OMI = 4 % (2 outputs) dBμV 90.5
Frequency response dB ± 1.0
Return loss at 85 MHz: - 1 dB/oct. dB > 19
Test sockets dB 20
Impedance Ω 75
Power consumption, operation W < 12.5
Pilot frequency for AGC MHz 80.15
Weight kg 1.3
Block diagram
μC
Opt. inBCout1BCout2
Test
RS485
Similar to picture
18
ORM 40E 24710018ORM 40E 24710018
• Opto-electrical conversion of return path signals• Two receivers, with individual shut-down• Two separate outputs with test sockets• Redundant operation possible• Monitoring of the optical input power at all inputs• Pilot-controlled• Wide optical input powe range• RS 485 interface• Line code evaluation• Stand-by mode for unused receiver
to reduce power consumption• Very low power consumption• Optical interfaces: E-2000, 0.1-dB-type or SC/APC; (other connectors on request)
ORM 22E 24710026ORM 22SC 24710046
Type ORM 22E ORM 22SC
Order no. 24710026 24710046
Optical interfaces E2000 SC/APC
Optical wave length nm 1280-1610
Optical input level range dBm -16 to +2
Optical return loss dB > 40
RF frequency range MHz 5-200
Equivalent noise current density pA/√Hz 2.5
RF output level at OMI = 5 % dBμV 90
Frequency response dB ± 0.75
Return loss dB > 19
Pilot control range dB 36
Optical modulation index pilot % 5
Test sockets dB 20
Impedance Ω 75
Power consumption, operation/stand-by W 6/1.5
Weight kg 1.3
Block diagram
IN #1
OR265-nn
OUT #1
TP #1
μP RS485
ICS #1
IN #2 OUT #2
TP #2
ICS #2
IN #1 OUT #1
TP #1
μP RS485
ICS #1
IN #2 OUT #2
TP #2
ICS #2
Optical return path receivers, twin
Optical return path receiver, quad
• Opto-electrical conversion of return path signals in HFC networks• Four receivers, with individual shut-down• Four separate outputs, each switchable to the test port• Redundant operation possible• Monitoring of the optical input power at all inputs• AGC is both pilot-controlled and optical-power controlled• Wide optical input power range• RS 485 interface for monitoring and control• Line code evaluation• Stand-by mode for each unused receiver to reduce power consumption• Very low power consumption• Optical interfaces: E-2000, 0.1 dB-type; (other connectors on request)• Requires two slots in KOBRA KBP 40xx-R subrack
ORM 40E 24710018
Type ORM 40E
Order no. 24710018
Optical interfaces E-2000
Optical wave length nm 1280-1610
Sensitivity of the optical receiver A/W 0.8
Equivalent noise current density at -16 dBm pA/√Hz 2.5
Optical input level range dBm -16 to +2
Optical return loss dB > 45
RF frequency range MHz 5-200
RF output level at OMI = 5 % dBμV 65 to 90
Frequency response dB ± 0.75
Return loss at 47 MHz dB > 20
RF output socket/ test socket (front panel) F
Pilot control range dB 26
Pilot tone frequency kHz 590 … 640
Optical modulation index pilot % 5
Test sockets dB 20
Impedance Ω 75
Power consumption normal operation (all 4 receivers active)/stand-by W 8/1.5
CINR with -11 dBm (4 QAM carriers with 2 MHz bandwidth, 10 % OMI) dB 50
Number of slots required 2
Weight kg 2.25
Block diagramOpticalinput
-22 ...+2dBm
0...10dB0...10dB0...24dB
RFoutput
>85dB�V
Opticalinput
0...10dB0...10dB0...24dB
RFoutput
>85dB�V
Opticalinput
0...10dB0...10dB0...24dB
RFoutput
>85dB�V
Opticalinput
0...10dB0...10dB0...24dB
RFoutput
>85dB�V
AGC(opt. input power
or pilot controlled )))
�C
-22 ...+2dBm
-22 ...+2dBm
-22 ...+2dBm
PSKDemod
LON�P
LEDs
RS485
20 dB test point
20 dB test point
20 dB test point
20 dB test point
19
Block diagram
20
RFoG return path receiver
• Opto-electrical conversion of DOCSIS return path signals• Two separate receivers, with individual shut-down• Four separate outputs or one common output• Redundant operation possible• Monitoring of the optical input power at all inputs• Wide optical input power range• RS 485 interface• Stand-by mode for unused receiver
to reduce power consumption• Very low power consumption• Optical interfaces: E-2000, 0.1 dB-type
(other connectors on request)• Ultra low-noise fi gure of 0.8 pA/√Hz
ORM 43E-RFoG 24710047
Type ORM 43E-RFoG
Order no. 24710047
Optical interfaces E-2000
Optical wave length nm 1280-1630
Equivalent noise current density pA/√Hz 0.8
Optical input level range dBm -25 to -18
Optical return loss dB > 40
RF frequency range MHz 5-85
RF output level at OMI = 17,5 % dBμV 76
Frequency response dB ± 0.75
Return loss dB > 19
Impedance Ω 75
Power consumption W 6
Weight kg 2.25
NEW
Block diagram
μC
ICS
ICS
ICS
ICS
E1
E2
E3
E4
A1
A2
A3
A4
C
dB
dB
dB
dB
21
OBM 113S-E 24910028OBM 213S-E 24910029OBM 413D-E 24910030OBM 116S-E 24910031OBM 216D-E 24910032OBM 416D-E 24910033
• Amplifies optical signals in the 1550 nm range• Optical output power: 13 or 16 dBm,
1 to 4 outputs, type dependent• Monitors optical input and output levels as well as pump laser current• 1 or 2 pump lasers, type dependent• Automatic switch-off with low input level• Low noise fi gure• Stand-by mode for low power consumption• Requires two slots in the optical broadband platform• Optical interfaces: E-2000, 0.1 dB-type (other connectors on request)
1:n
μC
Block diagram
Optical amplifiers
TypeOBM
113S-E
OBM
213S-E
OBM
413D-E
OBM
116S-E
OBM
216D-E
OBM
416D-E
Order no. 24910028 24910029 24910030 24910031 24910032 24910033
Optical wave length nm 1540-1560
Optical interfaces E-2000
Optical return loss dB 50
Optical input level dBm -4 … +10
Noise figure (with 0 dBm) dB < 4.8
Optical output power per output dBm 13 13 13 16 16 16
Optical output level tolerance (1551-1556/1548-1560 nm)
dB ± 0.5/0.8
Number of outputs 1 2 4 1 2 4
Number of pump lasers 1 1 2 1 2 2
Power consumption, operation W 12 12 24 12 24 24
Power consumption, stand-by W 6 6 10 6 10 10
No. of required slots in KBP 40xxR 2
Weight kg 2
22
Optical amplifiers (YEDFA)
OBM 0420Y-E 24910043OBM 0820Y-E 24910044OBM 1620Y-E 24910045OBM 1616Y-E 24910046
• Amplifies optical signals in the 1550 nm range• Optical output power: 16 or 20 dBm,
4, 8 or 16 outputs, type dependent• Monitors optical input and output levels as well as pump laser current• 2 pump lasers• Automatic switch-off with low input level• Low noise fi gure via cascading of an EDFA
as preamplifi er and a YEDFA as end stage• Stand-by mode for low power consumption• Requires two slots in the optical broadband platform KBP 40xxR• Optical interfaces:
- input: E-2000, 0.1 dB-type (other connectors on request); - output: LC/APC
• Very high number of outputs due to high-gain, cladding-pumped YEDFA end stage
• LEDs for status display
TypeOBM
0420Y-E
OBM
0820Y-E
OBM
1620Y-E
OBM
1616Y-E
Order no. 24910043 24910044 24910045 24910046
Optical wave length nm 1545-1565
Optical interfaces input/outputs E-2000 / LC/APC-8°
Optical return loss dB 40
Optical input level dBm -5 … +10
Noise figure (at 0 dBm) dB < 5.5
Optical output level per output dBm 20 16
Optical output level tolerance (1551-1556/1548-1560 nm)
dB ± 0.5
Number of outputs 4 8 16 16
Number of pump lasers 2 2 2 1
Power consumption, operation W 18 24 36 24
Power consumption, stand-by W 6 6 10 6
No. of required slots in KBP 40xxR 2
Weight kg 2
Block diagram
1:n
μC
YEDFAEDFA
23
• Redundancy selection from two input signals• RS 485 management interface for integration in diverse NMS systems • Independent level monitoring of both optical inputs• Position-sensor and LED signalling for the active switch position• Operation modes: Automatic, remote-controlled or manual• LED display (red-yellow-green) for signalling the optical input level and the function of the module
OFS 112-E 24810223
Type OFS 112-E
Order no. 24810223
Optical wave lengths nm 1460-1620
Type of optical fi bre Mono-mode 9/125 according to ITU G.625
Optical return loss dB 45
Optical input level dBm -8 ... +12
Insertion loss (1540 ... 1570 nm) 1) dB 1
Insertion loss (1460 ... 1620 nm) 1) dB 1.7
Optical isolation of the input ports dB 80
Number of outputs 1
Number of inputs 2
Power consumption, operation W 0.3
Temperature range (operation) °C 0 ... 40
No. of required slots in KBP 40xxR 2
Optical interface E-2000
Block diagram
μPμc
E-2000
Optical fibre
Optical fibre switch
1) Without connectors
24
Externally modulated transmitters (19" design),
1550 nm
• Designed for operation with optical amplifi ers (EDFAs)• Excellent parameters enable design of optical distribution systems over 100 km• Very low-noise, narrow-band DFB laser• Electro-optical modulator (Mach Zehnder) with 2 optical outputs• Automatic RF gain control: CW carrier, video or manual• Settable SBS threshold up to 19 dBm• Service interface: HTTP/SNMP Ethernet (integrated Web server)• Wave length: 1558.98 nm (ITU channel 23) • Additional wave lengths and optical output levels on request• Two power supply modules, pluggable during operation• Design: 19" racking, 1 height unit,
depth 600 mm• Power supply, type dependent: 230 VAC or 48 VDC
ESA 1085XA-E 24610252ESA 1085XA-E 24610140ESA 1100XA-E 24610351
Block diagram
Type ESA 1085XA-E ESA 1085XA-E ESA 1100XA-E
Order no. 24610252 24610140 24610351
Optical interfaces E-2000, 0.1 dB E-2000, 0.1 dB E-2000, 0.1 dB
Optical wave length nm 1558.98 1558.98 1558.98
Optical output level dBm 2 x 8.5 2 x 8.5 2 x 10.0
Relative intensity noise (RIN) dBc/Hz -160 -160 -160
Input level per TV channel, nominal dBμV 80 80 80
AGC dynamic range dB +3 ... -6 +3 ... -6 +3 ... -6
Return loss at 47 MHz dB 20 -1.5/oct., > 15 20 -1.5/oct., > 15 20 -1.5/oct., > 15
Frequency range MHz 47-1000 47-1000 47-1000
Frequency response 47-862 MHz dB ± 0.75 ± 0.75 ± 0.75
Test socket dB -20 ± 1 -20 ± 1 -20 ± 1
RF interface F-type socket F-type socket F-type socket
Voltage supply V 100 ... 240 AC ± 36 ... ± 72 DC ± 36 ... ± 72 DC
Power consumption W 60 60 60
Weight kg 9.7 9.7 9.7
25
OTS 1303N-E 24610334OTS 1305N-E 24610340OTS 1308N-E 24610405OTS 1313N-SC 24610404
• Opto-electrical conversion of forward signals such as AM-VSB, FM and QAM in HFC networks• Low-noise laser with pre-distortion technology• Optical output level adjustable from 0 to -3 dB (relative)• Dual RF input (low/high) to adapt
to different input levels• Electronic tuning elements for attenuation, slope, output level, Optical Modulation Index (OMI) etc.• Automatic load control for constant OMI• RS 485 interface• Optical interface: E-2000, 0.1 dB-type
(other connectors on request)• Test socket for input signal• Test socket for RF signal of laser diode• Stand-alone unit
Block diagram
Type OTS 1303N-E OTS 1305N-E OTS 1308N-E OTS 1313N-SC
Order no. 24610334 24610340 24610405 24610404
Nominal output level optical dBm 3 5 8 13
Optical interfaces E-2000 E-2000 E-2000 SC/APC
Optical wave length nm 1310
Optical output level range (relative) dB 0 to -3
CNR 1) dB ≥ 51 1)
RF frequency range MHz 5-1000
Nominal input level (5% OMI, Low input) dBμV 73 ... 97
Nominal input level (5 % OMI, High input) dBμV 87 ... 104
Slope range, electronically adjustable dB -2 ... +16
Return loss at 47 MHz dB 20 -1.5/oct., > 15
Return loss 5-65 MHz dB > 18
Impedance Ω 75
Power consumption W 17
Mechanical dimensions, L x W x H (19”, 1 RU) mm 483 x 240 x 45
EMC EN 50083-2
Safety EN 50083-1, EN 60950
Environmental conditions ETS 300 019-1-3 (temp. contr. loc.)
Operational voltage VAC 100 ... 240
1) CENELEC 42, OMI = 4 %, 5 km mono-mode fi bre, Prx = 0 dBm, Ith = 7 pA/√Hz
Directly modulated broadcast transmitters, 1310 nm
26
Externally modulated transmitter for CATV and SA
• Opto-electrical conversion of forward path signals• Designed for operation with optical amplifi ers (EDFAs)• Excellent parameters enable design of optical distribution systems over 100 km• Very low-noise, narrow-band DFB laser• Optical modulator with 2 optical outputs• Automatic RF gain control: CW carrier, video or manual• Settable SBS threshold up to 19 dBm• Service interface:: HTTP/SNMP Ethernet • LCD display and LEDs on the front panel• Additional wave lengths and optical output levels on request• Optical interface: E-2000, 0.1 dB-type
(other connectors on request)• Two power supply modules, pluggable during operation• Design: 19" racking, 1 height unit, depth: 600 mm• Power supply, type dependent: 230 VAC or 48 VDC
• Transmits the CATV frequency band (AM-VSB, FM, QAM) and the SAT-IF frequency band (analogue, DVB-S/ DVB-S2)
ESA 1085XaS-E 230 V 24610392
Similar to picture
Block diagram
Type ESA 1085XaS-E 230V
Order no. 24610392
Optical interface E-2000, 0.1 dB
Optical wave length nm 1548 ... 1560
Wave length tuning range GHz -100, -50, 0, 50, 100
Optical output level dBm 2 x 8.5
Relative intensity noise (RIN) dBc/Hz -160
Input level per TV channel, nominal dBμV 80
AGC dynamic range dB +3 ... -6
Return loss at 47 MHz dB 20 -1.5/oct., > 15
CATV
Frequency range MHz 47 ... 862
Frequency response 47-862 MHz dB ± 0.75
CNR (only CATV, without fi bre length, CENELEC 42) dB 54.5
CNR (CATV and SAT-IF, without fi bre length, CENELEC 42 and 36 QPSK) dB 52.5
CSO (Prx = 0 dBm, L = 25 km, EDFA) dB 64
CTB (Prx = 0 dBm, L = 25 km, EDFA) dB 63
Test socket dB -20 ± 1
RF interface F-type socket
SBS threshold (adjustable, CATV, fi bre lengths < 65 km) dBm Up to 19
SAT-IF
Frequency range MHz 950 ... 2605
Frequency response 950-2605 MHz dB < ± 2
Nominal input level per SAT-IF channel (OMI = 1 %) dBμV 85
RMS input level range (ALC functional range) dB -11 ... +5
Impedance ohms 75
Test output at OMI = 1 % dBμV 66 ± 2.5
CNR (Prx = 0 dBm, 36 QPSK carrier, no fi bre length) dB > 27
Intermodulation spacing dB < -35
General
Voltage supply V AC 2 x 100 ... 240
Power consumption W 68
Weight kg 9
Design 19" racking, 1 height unit, depth 600 mm
AT-IF (19" design)
27
28
OBV 1616 24910037OBV 3216 24910036OBV 820 24910035OBV 1620 24910034OBV 820W 24910053
• Amplifies optical signals in the 1550 nm range• Optical output power: 16.5 or 20 dBm,
8 to 32 outputs, type dependent• Monitors optical input and output levels as well as pump laser current• ErYb-doped optical amplifi er• Low noise fi gure• LC display, LEDs and input keys on front panel• RS 485 interface for management • Ideal for FTTH or HFC applications • Optical interfaces: LC/APC• Design: 19" racking, 1 height unit (RU)• Two power supply modules, pluggable during operation
Type OBV 1616 OBV 3216 OBV 820 OBV 820W OBV 1620
Order no. 24910037 24910036 24910035 24910053 24910034
Optical wave length nm 1545-1565
Optical return loss dB 45
Optical input level dBm -5 … +10
Noise figure (with 0 dBm) dB < 5.5
Optical output level per output dBm 16.5 16.5 20 20 20
Optical decoupling, input dB 35
Optical decoupling, output dB 35
Number of outputs W 16 32 8 8 16
Power consumption, max. W 45 45 40 40 45
Voltage supply VAC 100 … 240
Web interface No Yes No
Block diagram
1:n
μC
YEDFAEDFA
Optical amplifiers (19" design)
Similar to picture
29
Optical CWDM Mux/Demux
BOD 04C-UL-K13 OD 24810166BOD 04C-UL-K13 OM 24810228
• Thin-film technology• CWDM passband channel spacing:
20 nm according to ITU grid• High isolation of optical channels• Optical connectors: E-2000• Compact design• Types: ...-OM: Multiplexer ...-OD: Demultiplexer
Similar to picture
Type BOD 04C-UL-K13 OD BOD 04C-UL-K13 OM
Order no. 24810166 24810228
Number of channels 4 4
Central wave lengths nm 1511, 1531, 1551, 1571 1511, 1531, 1551, 1571
CWDM passband nm ± 6.5 ± 6.5
CWDM passband fl atness dB 0.5 0.5
Max. insertion loss 1) dB 1.8 1.8
Typ. insertion loss 1) dB 1.4 1.4
Maximum insertion loss Mux/Demux pair 1) dB 2.4 2.4
Optical isolation betweeen adjacent channels dB 30 30
Optical isolation (non-adjacent channel) dB 45 45
Optical return loss dB 45 45
Operating temperature range °C 0 ... +65 0 ... +65
1) Without connectors
30
Optical 1310 CWDM Mux/Demux
BOD 05C-1310-UL-K11 OM
24810088BOD 05C-1310-UL-K11 OD
24810087BOD 05C-1310-UL-K13 OM
24810075BOD 05C-1310-UL-K13 OD
24810074
• Thin-film technology• CWDM passband channel spacing:
20 nm according to ITU grid• High isolation of optical channels• Extremely low insertion loss: UL- type• Optical connectors: E-2000• Ultra-compact design, including pigtails• Types: ...-OM: Multiplexer ...-OD: Demultiplexer
TypeBOD 05C-1310-UL-
K11 OM
BOD 05C-1310-UL-
K11 OD
BOD 05C-1310-UL-
K13 OM
BOD 05C-1310-UL-
K13 OD
Order no. 24810088 24810087 24810075 24810074
Number of channels 5 5 5 5
Central wave lengths nm1471, 1491, 1511, 1531
1471, 1491, 1511, 1531
1511, 1531, 1551, 1571
1511, 1531, 1551, 1571
CWDM passband nm ± 6.5 ± 6.5 ± 6.5 ± 6.5
CWDM passband fl atness dB 0.5 0.5 0.5 0.5
Maximum CWDM insertion loss dB 1.8 1.8 1.8 1.8
Maximum CWDM insertion loss 1) Mux/Demux pair
dB 2.4 2.4 2.4 2.4
Passband 1310 nm nm 1270-1350 1270-1350 1270-1350 1270-1350
Maximum insertion loss 1) 1310 nm dB 1.0 1.0 1.0 1.0
Passband refl ection band nm 1504-1578 1464-1618 1504-1578 1464-1618
Maximum insertion loss 1) refl ection band dB 0.6 0.6 0.6 0.6
Optical isolation betweeen adjacent channels dB 30 30 30 30
Optical isolation (non-adjacent channel) dB 45 45 45 45
Optical isolation 1310 nm - CWDM dB 40 40 40 40
Optical return loss dB 45 45 45 45
Operating temperature range °C 0 ... +65 0 ... +65 0 ... +65 0 ... +65
Similar to picture
1) Without connectors
31
BOD 08C-UL-K11-OM 24810230 BOD 08C-UL-K11-OD 24810229
• Thin-film technology• CWDM passband channel spacing:
20 nm according to ITU grid• High isolation of optical channels• Optical connectors: E-2000• Compact design• Types: ...-OM: Multiplexer ...-OD: Demultiplexer
Type BOD 08C-UL-K11-OM BOD 08C-UL-K11-OD
Order no. 24810230 24810229
Number of channels 8 8
Central wave lengths nm1471, 1491, 1511, 1531, 1551, 1571, 1591, 1611
1471, 1491, 1511, 1531, 1551, 1571, 1591, 1611
CWDM passband nm ± 6.5 ± 6.5
CWDM passband fl atness dB 0.5 0.5
Max. insertion loss 1) dB 1.8 1.8
Typ. insertion loss 1) dB 1.4 1.4
Maximum insertion loss Mux/Demux pair 1) dB 2.4 2.4
Optical isolation betweeen adjacent channels dB 30 30
Optical isolation (non-adjacent channel) dB 45 45
Optical return loss dB 45 45
Operating temperature range °C 0 ... +65 0 ... +65
1) Without connectors
Similar to picture
Optical CWDM Mux/Demux
32
Optical 1310 CWDM Mux/Demux
BOD 09C-1310-UL-K11-OM
24810079BOD 09C-1310-UL-K11-OD
24810078
• Thin-film technology• CWDM passband channel spacing:
20 nm according to ITU grid• High isolation of optical channels for the demultiplexer• Extremely low insertion loss (UL)• Optical connectors: E-2000• Ultra-compact design, including pigtails• Compact design• Types: ...-OM: Multiplexer ...-OD: Demultiplexer
Type BOD 09C 1310-UL-K11-OM BOD 09C-1310-UL-K11-OD
Order no. 24810079 24810078
Number of channels 9 9
Central wave lengths nm1471, 1491, 1511, 1531, 1551, 1571, 1591, 1611
1471, 1491, 1511, 1531, 1551, 1571, 1591, 1611
CWDM passband nm ± 6.5 ± 6.5
CWDM passband fl atness dB 0.5 0.5
Maximum insertion loss 1) Mux/Demux pair dB 3.2 3.2
Passband 1310 nm nm 1270-1350 1270-1350
Maximum insertion loss 1) 1310 nm dB 1.0 1.0
Passband refl ection band nm 1464-1618 1464-1618
Maximum insertion loss 1) refl ection band dB 0.6 0.6
Optical isolation betweeen adjacent channels dB 30 30
Optical isolation (non-adjacent channel) dB 15 45
Optical isolation 1310 nm CWDM dB 40 40
Optical return loss dB 45 45
Operating temperature range °C 0 ... +65 0 ... +65
Similar to picture
1) Without connectors
33
Optical DWDM Mux/Demux 200-GHz ITU grid
BOD 0420 K31-OD 24810112BOD 0420 K31-OM 24810113
• Thin-film technology• DWDM channel spacing:
200 GHz according to ITU grid• High isolation of optical channels• Optical connectors: E-2000• Ultra-compact design• Types: ...-OM: Multiplexer ...-OD: Demultiplexer
Type BOD 0420 K31-OD BOD 0420 K31-OM
Order no. 24810112 24810113
Number of channels 4
Central wave lengths nm 1552,52; 1550,92; 1549,32; 1547,72 (C31, C33, C35, C37)
DWDM passband nm ± 0.25
CWDM passband fl atness dB 0.5
Maximum insertion loss 1) dB 2.0
Typ. insertion loss 1) nm 1.6
Optical isolation betweeen adjacent channels dB 30
Optical isolation (non-adjacent channel) dB 45
Optical return loss dB 45
Operating temperature range °C 0 to +65
Similar to picture
1) Without connectors
34
Optical splitters
• Optical splitters for universal application• Low insertion loss• Optimised for 1310 and 1550 nm or CWDM wave lengths• Optical connectors: E-2000 (other connectors on request)• High reliability• Ultra-compact design, including pigtails
BOV 002-CWDM 24810162BOV 003-CWDM 24810184BOV 004-CWDM 24810160
Type BOV 002-CWDM BOV 003-CWDM BOV 004-CWDM
Order no. 24810162 24810184 24810160
Optical wave length nm 1310, 1468.5 - 1617.5
Splitting ratio 1:2 1:3 1:4
Typ. insertion loss 1) dB 3.3 5.6 7.4
Maximum insertion loss 1) dB 3.6 5.9 7.7
Uniformity dB 0.7 1.1 1.4
Optical isolation, outputs dB 50
Min. return loss dB 45
1) Without connectors
Similar to picture
35
BOC 003-CWDM 24810231BOC 004-CWDM 24810232BOC 005-CWDM 24810233BOC 006-CWDM 24810234BOC 007-CWDM 24810235BOC 008-CWDM 24810236BOC 009-CWDM 24810237BOC 010-CWDM 24810238BOC 012-CWDM 24810239BOC 014-CWDM 24810240
• Optical splitters for universal application• Low insertion loss• Optimised for the CWDM spectrum of 1471 … 1611nm (C11 … C18)• Optical connectors: E-2000 (other connectors on request)• High reliability• Ultra-compact design, including pigtails
TypeBOC 003-
CWDM
BOC 004-
CWDM
BOC 005-
CWDM
BOC 006-
CWDM
BOC 007-
CWDM
BOC 008-
CWDM
BOC 009-
CWDM
BOC 010-
CWDM
BOC 012-
CWDM
BOC 014-
CWDM
Order no. 24810231 24810232 24810233 24810234 24810235 24810236 24810237 24810238 24810239 24810240
Optical wave length
nm 1471 … 1611
Typ. tap loss 1) dB 3.2 4 5 6 7 8 9 10 12 14
Tap loss tolerance dB ± 0.4 ± 0.4 ± 0.4 ± 0.4 ± 0.4 ± 0.8 ± 0.9 ± 0.9 ± 1.3 ± 1.5
Typ. through loss 1) dB 3.2 2.6 1.9 1.5 1.2 0.9 0.8 0.6 0.5 0.4
Through loss toler-ance
dB ± 0.4 ± 0.3
Optical isolation, outputs
dB 50
Temperature range (operation)
°C -10 … +65
Optical taps
Similar to picture
1) Without connectors
36
Optical Mux/Demux, tube design
BWMR 1550-1610-60-LC-RFoG
24810255BWMR 1310-1610-60-LC-RFoG
24810256BWMR 1550-1310-60-LC-RFoG
24810257
• Optical multiplexer/demultiplexer: Wave lengths in DS: 1310 or 1550 nm; Wave lengths in US: 1310 or 1610 nm• High reliability• Extremely high isolation of 65 dB• Low insertion loss• Design: tube• Optical connectors: 900 μm fi bres• Connectors: LC/APC• Designed for operation in RFoG networks for separation of downstream and upstream wave lengths in the headend
1) Without connectors
TypeBWMR
1550-1610-60-LC-RFoG
BWMR
1310-1610-60-LC-RFoG
BWMR
1550-1310-60-LC-RFoG
Order no. 24810255 24810256 24810257
Wave length 1 'pass channel' 1550 ± 40 1310 ± 40 1550 ± 40
Wave length 2 'refl ect channel' nm 1610 ± 6.5 1610 ± 6.5 1310 ± 20
Loss tolerance 'pass channel → common' with wave length 1 1) dB ≤ 1.0
Selection 'common → pass channel' with wave length 2 dB ≥ 45
Loss tolerance 'common → refl ect channel' with wave length 2 1) ≤ 0.5
Selection 'common → pass channel' with wave length 1 dB ≥ 15
Directional attenuation 'pass channel → refl ect channel' with wave length 1
≥ 60
PDL dB ≤ 0.2
Optical return loss dB ≥ 45
Max. optical output mW 300
Dimensions (L x D) mm 39 x 5.5
Operating temperature °C -5 ... +70
Storage temperature °C -40 ... +85
Fibre SMF, 0.9 mm loose tube, l = 1 m
Optical connectors LC/APC
Similar to picture
NEW
37
Optical passive racking 19", 1 RU
KOP 10 25010023
• 19" racking for passive optical components• Universal application• KOP 10 can be equipped with up to 24 OKU 01/SC, OKU 01/E or OKU 01/SC-E optical connectors• Unused openings can be covered with protective caps• Ideal for integration of the BOV 00x
optical splitters or BOC 0xx taps• Dimensions (H x W x D) in mm: 45 x 440 x 215• Accessories (included in delivery scope): 19” fastening kit, hook-and-loop tape (2 units, 200 x 5 mm), 24 dummy plugs
38
FTTX RFoG splitters 19", 1 RU
BOS 2032SC 25010067BOS 2032LC 25010066
• 19" 1 RU carrier• Contains an optical 2:32 splitter• Two group inputs and 32 outputs with SC/APC or LC/APC connectors• ITU-G.694.2-compliant• Broadband PLC splitter• Integrated fi bre tray
1) Includes opt. connectors, over complete temperature range and all polarisation states
Type BOS 2032SC BOS 2032LC
Order no. 25010067 25010066
Confi guration 1 x 2:32
Wave length range nm 1260 … 1650
Max. insertion loss (-40 … +80 °C) per splitter 1) dB 17.8
Uniformity dB < 1.6
Polarisation dependent loss dB 0.35
Typ. isolation (directivity) dB 55
Min. return loss dB 55
Temperature range (operation/storage) °C -40 ... +85
Relative humidity (non-condensing) % ≤ 90
Max. optical output mW < 300
Dimensions (W x H x D), 19" chassis mm 482 x 45 x 196
Fibre type (Core/sheathing/outer diameter) μm 9/125/250; G657A
Type of optical connection SC/APC LC/APC
Similar to picture
NEW
Block diagram
39
FTTX RFoG splitters 19", 1 RU
NEWBOS 2064SC 25010065BOS 2064LC 25010064
• 19" 1 RU carrier• Contains an optical 2:64 splitter• Two group inputs and 64 outputs with SC/APC or LC/APC connectors• ITU-G.694.2-compliant• Broadband PLC splitter• Integrated fi bre tray
1) Including opt. connectors
Type BOS 2064SC BOS 2064LC
Order no. 25010065 25010064
Confi guration 1 x 2:64
Wave length range nm 1260 … 1650
Max. insertion loss (-40 … +80 °C) per splitter 1) dB 21.1
Uniformity dB < 1.2
Polarisation dependent loss dB 0.3
Typ. isolation (directivity) dB 55
Min. return loss dB 55
Temperature range (operation/storage) °C -40 ... +85
Relative humidity (non-condensing) % ≤ 90
Max. optical output mW < 300
Dimensions (W x H x D), 19" chassis mm 482 x 45 x 196
Fibre type (Core/sheathing/outer diameter) μm 9/125/250
Type of optical connection SC/APC LC/APC
Similar to picture
Block diagram
40
Optical attenuators
Type ODF 01/SC ODF 02/SC ODF 03/SC ODF 04/SC ODF 05/SC
Order no. 24810198 24810199 24810200 24810201 24810202
Attenuation dB 1 2 3 4 5
ODF 01/SC 24810198ODF 02/SC 24810199ODF 03/SC 24810200ODF 04/SC 24810201ODF 05/SC 24810202ODF 06/SC 24810203ODF 07/SC 24810204ODF 08/SC 24810205ODF 09/SC 24810206ODF 10/SC 24810207
• Optical SC attenuators for universal use with SC connectors
• Available types: ODF 01/SC ... ODF 10/SC for attenuation
values of 1 dB ... 10 dB in 1 dB steps
Type ODF 06/SC ODF 07/SC ODF 08/SC ODF 09/SC ODF 10/SC
Order no. 24810203 24810204 24810205 24810206 24810207
Attenuation dB 6 7 8 9 10
41
Type ODF 01/E ODF 02/E ODF 03/E ODF 04/E ODF 05/E ODF 06/E ODF 07/E ODF 08/E ODF 09/E ODF 10/E
Order no. 24810141 24810142 24810143 24810144 24810145 24810146 24810147 24810148 24810149 24810150
Attenuation dB 1 2 3 4 5 6 7 8 9 10
ODF 01/E 24810141ODF 02/E 24810141ODF 03/E 24810143ODF 04/E 24810144ODF 05/E 24810145ODF 06/E 24810146ODF 07/E 24810147ODF 08/E 24810148ODF 09/E 24810149ODF 10/E 24810150
• Optical E-2000 attenuators for universal use with E-2000 connectors
• Available types: ODF 01/E ... ODF 10/E for attenuation
values of 1 dB ... 10 dB in 1 dB steps
Optical attenuators
42
Optical patch cables
• Optical patch cables for universal application• 2.5 mm patch cord
OFC 050/E yellow 24810152OFC 150/E yellow 24810154OFC 300/E yellow 24810157OFC 050/E red 24810151OFC 150/E red 24810155OFC 300/E red 24810156OFC 300/SC 24810104OFC 300/LC 24810126OFC 300/LC-E 24810174OFC 300 SC-E 24810262
Type OFC 050/E yellow OFC 150/E yellow OFC 300/E yellow OFC 050/E red OFC 150/E red
Order no. 24818152 24818154 24818157 24810151 24810155
Length cm 50 150 300 50 150
Diameter of patch cord mm 2.5 2.5 2.5 2.5 2.5
Opt. attenuation of optical connectors
dB 0.1 0.1 0.1 0.1 0.1
Optical connectors 2 x E-2000
Type OFC 300/E red OFC 300/SC OFC 300/LC OFC 300/LC-E OFC 300 SC-E
Order no. 24810156 24810104 24810126 24810174 24810262
Length cm 300 300 300 300 300
Diameter of patch cord mm 2.5 2.5 2.5 2.5 2.5
Opt. attenuation ofoptical connectors
dB 0.1 0.3 0.3 0.3 0.3/0.1
Optical connectors 2 x E-2000 2 x SC/APC 2 x LC/APC LC/APC E-2000 SC/APC E-2000
43
• Optical couplers for universal use• Available types: - OKU 01/SC: SC/APC both ends - OKU 01/SC-E: Optical connection adapter SC/APC to E-2000 - OKU 01/E: E-2000 both ends
OKU 01/SC 24810031OKU 01/SC-E 24810099OKU 01/E 24810100
Optical couplers
Similar to picture
Please contact us for advice:99
8116
76/1
/041
1/JH
/Pf
Tec
hnic
al m
odifi
catio
ns a
re r
eser
ved
.
KATHREIN-Werke KG · Phone +49 (0)8031 184-0 · Fax +49 (0)8031 184-385Anton-Kathrein-Str. 1 - 3 · P.O. Box 10 04 44 · 83004 Rosenheim · GERMANY
www.kathrein.de · [email protected]
The products described must only be installed by qualified specialists. Please consult the provided instruction manuals for the safety instructions that are to be considered during use.
All specified data are typical values if not otherwise noted.