DC0-021-2.02 ACP 1703 Platforms Automation Units and Automation Networks ______________________________________________________________________________Preface, Table of Contents ______________________________________________________________________________Configuration of Automation Units1______________________________________________________________________________Configuration of Automation Networks2______________________________________________________________________________Redundancy3______________________________________________________________________________Transmission of Disturbance Records4______________________________________________________________________________Reception of Time Signals5______________________________________________________________________________AppendixA______________________________________________________________________________Literature ______________________________________________________________________________ Siemens AktiengesellschaftOrder no.: DC0-021-2.02 Hint Please observe Notes and Warnings for your own safety in the Preface. Disclaimer of Liability Although we have carefully checked the contents of this publication for conformity with the hardware and software described, we cannot guarantee complete conformity since errors cannot be excluded.The information provided in this manual is checked at regular intervals and any corrections that might become necessary are included in the next releases. Any suggestions for improvement are welcome. Subject to change without prior notice. Document Label: SIC1703-HBACPCONFIG-ENG_V2.02 Release date 22.07.11 Copyright Copyright Siemens AG 2011 The reproduction, transmission or use of this document or its contents is not permitted without express written authority. Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. ACP 1703 Platforms, Configuration AU + Networks3 DC0-021-2.02, Edition 07.2011 Preface This document is applicable to the following product(s): AK 1703 ACP BC 1703 ACP TM 1703 ACP TM 1703 emic TM 1703 mic Purpose This manual describes the recommended configurations for the ACP 1703 system. Representation of configurations Information about used types and lengths of cables Listing of used modules and cables with their item numbers additional important hints Target Group This handbook is intended for persons who are entrusted with the design of ACP 1703 systems. 4ACP 1703 Platforms, Configuration AU + Networks DC0-021-2.02, Edition 07.2011 Notes on Safety This manual does not constitute a complete catalog of all safety measures required for operating the equipment (module, device) in question because special operating conditions might require additional measures. However, it does contain notes that must be adhered to for your own personal safety and to avoid damage to property. These notes are highlighted with a warning triangle and different keywords indicating different degrees of danger. Danger means that death, serious bodily injury or considerable property damage will occur, if the appropriate precautionary measures are not carried out. Warning means that death, serious bodily injury or considerable property damage can occur, if the appropriate precautionary measures are not carried out. Caution means that minor bodily injury or property damage could occur, if the appropriate precautionary measures are not carried out. Hint Please observe Notes and Warnings for your own safety in the Preface. Qualified Personnel Commissioning and operation of the equipment (module, device) described in this manual must be performed by qualified personnel only. As used in the safety notes contained in this manual, qualified personnel are those persons who are authorized to commission, release, ground, and tag devices, systems, and electrical circuits in accordance with safety standards. Use as Prescribed The equipment (device, module) must not be used for any other purposes than those described in the Catalog and the Technical Description. If it is used together with third-party devices and components, these must be recommended or approved by Siemens. Correct and safe operation of the product requires adequate transportation, storage, installation, and mounting as well as appropriate use and maintenance. During operation of electrical equipment, it is unavoidable that certain parts of this equipment will carry dangerous voltages. Severe injury or damage to property can occur if the appropriate measures are not taken: Before making any connections at all, ground the equipment at the PE terminal. Hazardous voltages can be present on all switching components connected to the power supply. Even after the supply voltage has been disconnected, hazardous voltages can still be present in the equipment (capacitor storage). Equipment with current transformer circuits must not be operated while open. The limit values indicated in the manual or the operating instructions must not be exceeded; that also applies to testing and commissioning. ACP 1703 Platforms, Configuration AU + Networks5 DC0-021-2.02, Edition 07.2011 Table of Contents 1Configuration of Automation Units..................................................................................7 1.1Base Unit AK 1703 ACP with Peripheral Elements..............................................8 1.1.1AK 1703 ACP, local PE...................................................................................8 1.1.2AK 1703 ACP AK 1703 ACP PE, electrical .................................................9 1.1.3AK 1703 ACP TM 1703 ACP PE, optical...................................................10 1.1.4AK 1703 ACP TM 1703 ACP PE, optical, multi-hierarchical .....................12 1.1.5AK 1703 ACP TM 1703 ACP PE, electrical and optical ............................14 1.1.6AK 1703 ACP AM 1703 PE and BC 1703, optical.....................................16 1.2Base Unit TM 1703 ACP with Peripheral Elements ...........................................18 1.2.1TM 1703 ACP TM 1703 ACP PE, electrical ..............................................18 1.2.2TM 1703 ACP TM 1703 ACP PE, electrical and optical ............................20 1.3Base Unit BC 1703 ACP/M with Peripheral Elements .......................................22 1.3.1BC 1703 ACP/M TM 1703 ACP PE, optical ..............................................22 2Configuration of Automation Networks.........................................................................23 2.1Serial Communication ........................................................................................24 2.1.1Point-to-point-traffic, IEC 60870-5-101, electrical .........................................24 2.1.2Point-to-point-traffic, IEC 60870-5-101, optical .............................................26 2.1.3Multi-point Traffic, IEC 60870-5-101 or -103, electrical ................................28 2.1.4Multi-point Traffic, IEC 60870-5-101 or 103, optical, Star...........................31 2.1.5Multi-point Traffic, IEC 60870-5-101 or 103, optical, Ring..........................34 2.1.6Multi-point Traffic, IEC 60870-5-101 or 103, optical, Ring+Star .................36 2.1.7Multi-point Traffic, IEC 60870-5-101 or 103, optical, Tree..........................40 2.1.8Multi-point Traffic, IEC 60870-5-103, optical, 2 Slaves.................................44 2.1.9Methods for Coupling of (non-SIEMENS) Protective Devices in Ring Configurations ...............................................................................................46 2.1.10Dial-up Traffic analog/GSM, IEC 60870-5-101 .............................................50 2.1.11Dial-up Traffic ISDN, IEC 60870-5-101.........................................................52 2.1.12Dial-up Traffic analog/GSM/ISDN, IEC 60870-5-101....................................54 2.1.13SIEMENS Fieldbus, IEC 60870-5-101, electrical..........................................56 2.1.14SIEMENS Fieldbus, IEC 60870-5-101, optical, Star.....................................58 2.1.15SIEMENS Fieldbus, IEC 60870-5-101, optical, Ring....................................62 2.1.16SIEMENS Fieldbus, IEC 60870-5-101, optical, Tree....................................64 2.2LAN Communication...........................................................................................68 2.2.1LAN Communication electrical ......................................................................68 2.2.2LAN Communication optical ..........................................................................71 2.3Fieldbus/Profibus Communication......................................................................74 2.3.1Fieldbus/Profibus Communication: Master AK 1703 ACP............................74 2.3.2Fieldbus/Profibus Communication: Master TM 1703 ACP............................75 Table of Contents 6ACP 1703 Platforms, Configuration AU + Networks Edition 07.2011, DC0-021-2.02 3Redundancy..................................................................................................................... 77 3.1Redundant Basic System Elements .................................................................. 78 3.1.1AK 1703 ACP AK 1703 ACP PE, electrical, redundant BSE.................... 78 3.1.2AK 1703 ACP TM 1703 ACP PE, electrical, redundant BSE ................... 80 3.1.3AK 1703 ACP TM 1703 ACP PE, electrical and optical, redundant BSE. 82 3.1.4AK 1703 ACP TM 1703 ACP PE, optical, redundant BSE+redundant Ax-PE-Bus.......................................................................................................... 84 3.1.5Data Transfer between redundant BSE-Pairs.............................................. 86 3.2Redundant Automation Units............................................................................. 87 3.2.1Redundant AUs, Voting by SCA-RS, Distance up to 15 m.......................... 87 3.2.2Redundant AUs, Voting by SCA-RS, Distance up to 200 m........................ 89 3.2.3Redundant AUs, Voting by SCA-RS, Distance higher than 200 m.............. 91 3.2.4Wiring of the Modular Coupling RJ-45 9-pol D-SUB................................. 93 3.2.5Redundant Automation Units in star-shaped Configurations ....................... 94 3.2.6Redundant Automation Units in ring-shaped Configurations ....................... 96 4Transmission of Disturbance Records......................................................................... 99 4.1General ............................................................................................................ 100 5Reception of Time Signals ........................................................................................... 103 5.1Time Master 4 Options ................................................................................. 104 5.2Methods for Time Synchronization.................................................................. 106 5.2.1Time Synchronization by Serial Time Signal .............................................. 107 5.2.2Time Synchronization by Minute Pulse ...................................................... 109 5.2.3Time Synchronization by Remote Synchronization.................................... 111 AAppendix........................................................................................................................ 113 A.1Electrical Connection, Cable longer than 10 m............................................... 114 A.2Signal Propagation Delays .............................................................................. 115 ACP 1703 Platforms, Configuration AU + Networks7 DC0-021-2.02, Edition 07.2011 1Configuration of Automation Units Content 1.1Base Unit AK 1703 ACP with Peripheral Elements..............................................8 1.2Base Unit TM 1703 ACP with Peripheral Elements ...........................................18 1.3Base Unit BC 1703 ACP/M with Peripheral Elements .......................................22 Configuration of Automation Units 8ACP 1703 Platforms, Configuration AU + Networks Ausgabedatum 07.2011, DC0-021-2.02 1.1Base Unit AK 1703 ACP with Peripheral Elements 1.1.1AK 1703 ACP, local PE Local peripheral elements in an AK 1703 ACP base unit base unitAK 1703 ACPperipheral elementsCP-2010ESD EARTH FACILITYRY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER$PS- 5620 To one basic system element CP-2010/CPC25 or CP-2017/PCCX25 one bus line with max. 16 peripheral elements can be connected. The Ax-PE bus can be driven by one of the CPUs (C0-CPU to C16-CPU).Default: C0-CPU Necessary modules and cables DesignationItem Number / MLFB Base unit AK 1703 ACP CP-2010 Master control element CP-2010/CPC25 BC2-010 / 6MF10130CA100AA0 CP-2017 Processing and communication elementCP-2017/PCCX25 BC2-017 / 6MF10130CA170AA0 Configuration of Automation Units ACP 1703 Platforms, Configuration AU + Networks9 DC0-021-2.02, Ausgabedatum 07.2011 1.1.2AK 1703 ACP AK 1703 ACP PE, electrical Base unit AK 1703 ACP to peripheral elements AK 1703 ACP,electrically connected base unitAK 1703 ACPAx 1703 peripheral bus (electrical)16 Mbpspatch-cable, length up to3 mperipheral elements AK 1703 ACP(max. 16 PE)rear viewCM-2833CP-2010CP-2017Line 1ESD EARTH FACILITYRY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER$PS-56201ESD EARTH FACILITYRY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER$PS-5620 To one basic system element CP-2010/CPC25 or CP-2017/PCCX25 one bus line with max. 16 peripheral elements can be connected. Depending on the slot of the basic system element the socket connector for the electrical Ax 1703 peripheral bus has to be selected. (for example: slot C2 socket connector AXPE-C2) Necessary modules and cables DesignationItem Number / MLFB Base unit AK 1703 ACP CP-2010 Master control element CP-2010/CPC25 BC2-010 / 6MF10130CA100AA0 CP-2017 Processing and communication elementCP-2017/PCCX25 BC2-017 / 6MF10130CA170AA0 Cable Patch cable CAT5 (4x2) AWG26/7T41-255 (1m) / 6MF13040BC550AA0T41-251 (2m) / 6MF13040BC510AA0T41-252 (3m) / 6MF13040BC520AA0 Peripheral elements AK 1703 ACP CM-2833 AK 1703 ACP board rack extensionGC2-833 / 6MF11130CJ330AA0 Configuration of Automation Units 10ACP 1703 Platforms, Configuration AU + Networks Ausgabedatum 07.2011, DC0-021-2.02 1.1.3AK 1703 ACP TM 1703 ACP PE, optical Base unit AK 1703 ACP to peripheral elements TM 1703 ACP,optically connected Bus Interface ModulesCM-0842Ax 1703 Peripheral bus (electrical)16 Mbpspatch-cable, length up to3 mI/O modules (max. 8)Settings on the configuration switch S1Ax 1703 peripheral bus (optical)16 MbpsFO, length up to 200 m1 peripheral elementperipheral elementsTM 1703 ACP(max. 16 PE)base unitAK 1703 ACPCP-2010CP-2017PE-6411PS-663x(max. 4)222ESD EARTH FACILITYRY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER$PS-5620$10$10ONOFFS11 To one basic system element CP-2010/CPC25 or CP-2017/PCCX25 one bus line with max. 16 peripheral elements can be connected. Depending on the slot of the basic system element the socket connector for the electrical Ax 1703 peripheral bus has to be selected. (for example: slot C2socket connector AXPE-C2) In configurations with optical remoted TM 1703 ACP PEs 1000m-fibre cables cannot be used! Each bus interface module CM-0842 has to be supplied separately. (18 VDC ... 78 VDC) Configuration switch CM-0842 1..... F1/F2...... ON........ 16 MBit 2..... LINE2 ..... OFF...... PE(O) 3..... AS2 ........ OFF...... 0 4..... AS1 ........ OFF...... 0 5..... AS0 ........ OFF...... 0 6..... RED........ OFF...... CM-0842 7..... LAD........ OFF...... inactive 8..... LINE1 ..... OFF...... PE Configuration of Automation Units ACP 1703 Platforms, Configuration AU + Networks11 DC0-021-2.02, Ausgabedatum 07.2011 Necessary modules and cables DesignationItem Number / MLFB Base unit AK 1703 ACP CP-2010 Master control element CP-2010/CPC25 BC2-010 / 6MF10130CA100AA0 CP-2017 Processing and communication elementCP-2017/PCCX25 BC2-017/ 6MF10130CA170AA0 CablePatch cable CAT5 (4x2) AWG26/7T41-255 (1m) / 6MF13040BC550AA0T41-251 (2m) / 6MF13040BC510AA0T41-252 (3m) / 6MF13040BC520AA0 Bus interface modules CM-0842 Ax 1703-bus interface 4x FOGA0-842 / 6MF11110AJ420AA0 CableFO-INDOORCABLE-200-DUP-BREAK-ROUND FO-CONNECTOR-ODLP-200 (2 pcs. per connection) TF7-035 TF7-015 FO-OUTDOORCABLE-200-2FIB-ARMFO-CONNECTOR-ODLP-200 (2 pcs. per connection)FO-PIPE SPLITTER 2Y-LR1 (2 pcs. per connection)(only for outdoorcableTF7-036) TF7-036 TF7-015 TF7-066 Peripheral elements TM 1703 ACP PE-6411 peripheral coupling Ax-bus 1x opticalGC6-411 / 6MF11130GE110AA0 Configuration of Automation Units 12ACP 1703 Platforms, Configuration AU + Networks Ausgabedatum 07.2011, DC0-021-2.02 1.1.4AK 1703 ACP TM 1703 ACP PE, optical, multi-hierarchical Base unit AK 1703 ACP to peripheral elements TM 1703 ACP,optically, multi-hierarchically connected Bus Interface ModulesCM-0842Ax 1703 Peripheral bus (electrical)16 Mbpspatch-cable, length up to3 mI/O modules (max. 8)Settings A on the configuration switch S1Ax 1703 peripheral bus (optical)16 MbpsFO, length up to 200 m1 peripheral elementperipheral elementsTM 1703 ACP(max. 16 PE)base unitAK 1703 ACPSettings A on the configuration switch S1Settings B on the configuration switch S1Ax 1703 peripheral bus (optical)16 MbpsFO, length up to 200 mBus Interface ModulesCM-0842CP-2010CP-2017PE-6411PS-663x(max. 4)(max. 4)2222ESD EARTH FACILITYRY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER$PS-5620$10$10ONOFFS11$10$10ONOFFS1ONOFFS1 Configuration of Automation Units ACP 1703 Platforms, Configuration AU + Networks13 DC0-021-2.02, Ausgabedatum 07.2011 To one basic system element CP-2010/CPC25 or CP-2017/PCCX25 one bus line with max. 16 peripheral elements can be connected. Depending on the slot of the basic system element the socket connector for the electrical Ax 1703 peripheral bus has to be selected. (for example: slot C2 socket connectorAXPE-C2) In configurations with optical remoted TM 1703 ACP PEs 1000m-fibre cables cannot be used! Each bus interface module CM-0842 has to be supplied separately. (18 VDC ... 78 VDC) Settings A on the Configuration switch CM-0842 1 .....F1/F2 ..... ON ....... 16 MBit 2 .....LINE2..... OFF...... PE(O) 3 .....AS2........ OFF...... 0 4 .....AS1........ OFF...... 0 5 .....AS0........ OFF...... 0 6 .....RED....... OFF...... CM-0842 7 .....LAD........ OFF...... inactive 8 .....LINE1..... OFF...... PE Settings B on the Configuration switch CM-0842 1 .....F1/F2 ..... ON ....... 16 MBit 2 .....LINE2..... ON ....... BSE(I) 3 .....AS2........ OFF...... 0 4 .....AS1........ OFF...... 0 5 .....AS0........ OFF...... 0 6 .....RED....... OFF...... CM-0842 7 .....LAD........ OFF...... inactive 8 .....LINE1..... OFF...... PE Necessary modules and cables DesignationItem Number / MLFB Base unit AK 1703 ACP CP-2010 Master control element CP-2010/CPC25 BC2-010 / 6MF10130CA100AA0 CP-2017 Processing and communication elementCP-2017/PCCX25 BC2-017 / 6MF10130CA170AA0 CablePatch cable CAT5 (4x2) AWG26/7T41-255 (1m) / 6MF13040BC550AA0T41-251 (2m) / 6MF13040BC510AA0T41-252 (3m) / 6MF13040BC520AA0 Bus interface modules CM-0842 Ax 1703-bus interface 4x FOGA0-842 / 6MF11110AJ420AA0 CableFO-INDOORCABLE-200-DUP-BREAK-ROUND FO-CONNECTOR-ODLP-200 (2 pcs. per connection) TF7-035 TF7-015 FO-OUTDOORCABLE-200-2FIB-ARMFO-CONNECTOR-ODLP-200 (2 pcs. per connection)FO-PIPE SPLITTER 2Y-LR1 (2 pcs. per connection)(only for outdoorcableTF7-036) TF7-036 TF7-015 TF7-066 Peripheral elements TM 1703 ACP PE-6411 peripheral coupling Ax-bus 1x opticalGC6-411 / 6MF11130GE110AA0 Configuration of Automation Units 14ACP 1703 Platforms, Configuration AU + Networks Ausgabedatum 07.2011, DC0-021-2.02 1.1.5AK 1703 ACP TM 1703 ACP PE, electrical and optical Base unit AK 1703 ACP to peripheral elements TM 1703 ACP,electrically and optically connected I/O modules (max. 8)Ax 1703 peripheral bus (electrical)16 Mbpspatch-cable, length up to 3 mAx 1703 peripheral bus (optical)16 MbpsFO, length up to 200 mI/O modules (max. 8)Ax 1703 peripheral bus (electrical)16 MbpsUSB-cable, length up to 3 mbus interface modulesCM-08431 peripheral element1 peripheral elementbus interface modulesCM-0842base unitAK 1703 ACPperipheral elementsTM 1703 ACP(max. 16 PE)Settings on the configuration switch S1PE-6410PS-663xPE-6411PS-663xCP-2010CP-2017333ESD EARTH FACILITYRY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER$PS-562022$10$10ONOFFS111 Configuration of Automation Units ACP 1703 Platforms, Configuration AU + Networks15 DC0-021-2.02, Ausgabedatum 07.2011 To one basic system element CP-2010/CPC25 or CP-2017/PCCX25 one bus line with max. 16 peripheral elements can be connected. Depending on the slot of the basic system element the socket connector for the electrical Ax 1703 peripheral bus has to be selected. (for example: slot C2 socket connectorAXPE-C2) In configurations with optical remoted TM 1703 ACP PEs 1000m-fibre cables cannot be used! The bus interface modules CM-0843 are supplied by the power supplies PS-663x. The power consumption of the CM-0843 (see technical data in data sheet) has to be considered on the PS-663x. Each bus interface module CM-0842 has to be supplied separately. (18 VDC ... 78 VDC) Configuration switch CM-0842 1 .....F1/F2 ..... ON ....... 16 MBit 2 .....LINE2..... OFF...... PE(O) 3 .....AS2........ OFF...... 0 4 .....AS1........ OFF...... 0 5 .....AS0........ OFF...... 0 6 .....RED....... OFF...... CM-0842 7 .....LAD........ OFF...... inactive 8 .....LINE1..... ON ....... 1:1 Necessary modules and cables DesignationItem Number / MLFB Base unit AK 1703 ACP CP-2010 Master control element CP-2010/CPC25 BC2-010 / 6MF10130CA100AA0 CP-2017 Processing and communication elementCP-2017/PCCX25 BC2-017 / 6MF10130CA170AA0 CablePatch cable CAT5 (4x2) AWG26/7T41-255 (1m) / 6MF13040BC550AA0 T41-251 (2m) / 6MF13040BC510AA0 T41-252 (3m) / 6MF13040BC520AA0 CM-0843 Ax 1703-bus interface electricalGA0-843 / 6MF11110AJ430AA0 Bus interface modules CM-0842 Ax 1703-bus interface 4x FOGA0-842 / 6MF11110AJ420AA0 CableUSB-cableTC6-201 (1.5m)) / 6MF13130GC010AA0TC6-202 (2m) / 6MF13130GC020AA0 TC6-203 (3m) / 6MF13130GC030AA0 CableFO-INDOORCABLE-200-DUP-BREAK-ROUND FO-CONNECTOR-ODLP-200 (2 pcs. per connection) TF7-035 TF7-015 FO-OUTDOORCABLE-200-2FIB-ARMFO-CONNECTOR-ODLP-200 (2 pcs. per connection)FO-PIPE SPLITTER 2Y-LR1 (2 pcs. per connection)(only for outdoorcableTF7-036) TF7-036 TF7-015 TF7-066 PE-6410 peripheral coupling Ax-bus electrical GC6-410 / 6MF11130GE100AA0 Peripheral elements TM 1703 ACP PE-6411 peripheral coupling Ax-bus 1x opticalGC6-411 / 6MF11130GE110AA0 Configuration of Automation Units 16ACP 1703 Platforms, Configuration AU + Networks Ausgabedatum 07.2011, DC0-021-2.02 1.1.6AK 1703 ACP AM 1703 PE and BC 1703, optical Base unit AK 1703 ACP to peripheral elements AM 1703 and to BC 1703,optically connected Ax 1703 Peripheral bus (electrical)4 Mbpspatch-cable, length up to 3 mAx 1703 peripheral bus (optical)4 MbpsFO, length up to 200 mbus interface modulesCM-0842peripheral elementsSettings on theconfiguration switch S1peripheral elementsAM 1703base unitAK 1703 ACPModel 1: 1 PEModel 2: 2 PE(max. 4)CP-2010CP-2017PS-16xxCM-1831/CM-1832BC 17032222ESD EARTH FACILITYRY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER$PS-5620 $10$10ONOFFS11 Configuration of Automation Units ACP 1703 Platforms, Configuration AU + Networks17 DC0-021-2.02, Ausgabedatum 07.2011 To one basic system element CP-2010/CPC25 or CP-2017/PCCX25 one bus line with max. 16 peripheral elements can be connected. Depending on the slot of the basic system element the socket connector for the electrical Ax 1703 peripheral bus has to be selected. (for example: slot C2 socket connectorAXPE-C2) The data rate for connections with AM 1703 and BC 1703 is 4 MBps. The combination of different data rates on one bus line is not possible Each bus interface module CM-0842 has to be supplied separately. (18 VDC ... 78 VDC) The BC 1703 model 1 includes 1 PE, the model 2 includes 2 PE. Model 3 cannot be connected via the Ax 1703 peripheral bus. Configuration switch CM-0842 1 .....F1/F2 ..... OFF...... 4 MBit 2 .....LINE2..... OFF...... PE(O) 3 .....AS2........ OFF...... 0 4 .....AS1........ OFF...... 0 5 .....AS0........ OFF...... 0 6 .....RED....... OFF...... CM-0842 7 .....LAD........ OFF...... inactive 8 .....LINE1..... OFF...... PE Necessary modules and cables DesignationItem Number / MLFB CP-2010 Master control element CP-2010/CPC25 BC2-010 / 6MF10130CA100AA0 Base unit AK 1703 ACP CP-2017 Processing and communication elementCP-2017/PCCX25 BC2-017 / 6MF10130CA170AA0 CablePatch cable CAT5 (4x2) AWG26/7T41-255 (1m) / 6MF13040BC550AA0T41-251 (2m) / 6MF13040BC510AA0T41-252 (3m) / 6MF13040BC520AA0 Bus interface modules CM-0842 Ax 1703-Bus interface 4x FOGA0-842 / 6MF11110AJ420AA0 FO-INDOORCABLE-200-DUP-BREAK-ROUND FO-CONNECTOR-ODLP-200 (2 pcs. per connection) TF7-035 TF7-015 Cable FO-OUTDOORCABLE-200-2FIB-ARMFO-CONNECTOR-ODLP-200 (2 pcs. per connection)FO-PIPE SPLITTER 2Y-LR1 (2 pcs. per connection)(only for outdoorcableTF7-036) TF7-036 TF7-015 TF7-066 CM-180x board rack (for 3, 5, 10, 14, 20 slots) CM-1831 bus-interface-slave 1x FO GA1-80x GA1-831 / 6MF11110BJ310AA0 Peripheral elements AM 1703 CM-1832 bus-interface-slave 1x FO (110/220VDC)GA1-832 / 6MF11110BJ320AA0 CM-5800 BC 1703 model 1GA5-800 / 6MF11110FJ000AA0 BC 1703 CM-5801 BC 1703 model 2GA5-801 / 6MF11110FJ010AA0 Configuration of Automation Units 18ACP 1703 Platforms, Configuration AU + Networks Ausgabedatum 07.2011, DC0-021-2.02 1.2Base Unit TM 1703 ACP with Peripheral Elements 1.2.1TM 1703 ACP TM 1703 ACP PE, electrical Base unit TM 1703 ACP to peripheral elements TM 1703 ACP,electrically connected Ax 1703 peripheral bus (electrical)4 Mbpspatch-cable, length up to 3 mI/O modules (max. 8)bus interface modulesCM-08431 peripheral elementAx 1703 peripheral bus (electrical)16 MbpsUSB-cable, length up to 3 mCommunication with otherautomation unitsbase unitTM 1703 ACPperipheral elementsTM 1703 ACP(max. 16 PE)Ax 1703 peripheral bus (electrical)16 MbpsUSB-cable, length up to 3 mPE-6410PS-663x(max. 4)222$

TM1703AfFfF-601+X1X11 X4X12X14X16X15X13WDER X5 X3X6X7X8X9X10SIM0/PK /LK/LK/PK RXERxTXSI3 SI2 SI1 SI0 LOCFBM-PRE/2M-PRE/3M-PRE/0M-PRE/1NCTBPWR24-60VDCPUSHTOUNLOCKERCOMCPYRYRESSI0SI2(FB)SI1(ETO)SI3RELEASEPUSHTORELEASEPUSHTOX21 2 34 5 6122 To one master control element one bus line with max. 16 peripheral elements can be connected. The bus interface modules CM-0843 are supplied by the power supplies PS-663x. The power consumption of the CM-0843 (see technical data in data sheet) has to be considered on the PS-663x. Configuration of Automation Units ACP 1703 Platforms, Configuration AU + Networks19 DC0-021-2.02, Ausgabedatum 07.2011 Necessary modules and cables DesignationItem Number / MLFB Base unit TM 1703 ACP CP-6014 Master control element CP-6014/CPCX65 GC6-014 / 6MF11130GA140AA0 CablePatch cable CAT5 (4x2) AWG26/7T41-255 (1m) / 6MF13040BC550AA0 T41-251 (2m) / 6MF13040BC510AA0 T41-252 (3m) / 6MF13040BC520AA0 Bus Interface Module CM-0843 Ax 1703-bus interface electricalGA0-843 / 6MF11110AJ430AA0 CableUSB-cableTC6-201 (1.5m) / 6MF13130GC010AA0TC6-202 (2m) / 6MF13130GC020AA0 TC6-203 (3m) / 6MF13130GC030AA0 Peripheral elements TM 1703 ACP PE-6410 peripheral coupling Ax-bus electricalGC6-410 / 6MF11130GE100AA0 Configuration of Automation Units 20ACP 1703 Platforms, Configuration AU + Networks Ausgabedatum 07.2011, DC0-021-2.02 1.2.2TM 1703 ACP TM 1703 ACP PE, electrical and optical Base unit TM 1703 ACP to peripheral elements TM 1703 ACP,electrically and optically connected I/O modules (max. 8)Ax 1703 peripheral bus (electrical)16 Mbpspatch-cable, length up to 3 mAx 1703 peripheral bus (optical)16 MbpsFO, length up to 200 mI/O modules (max. 8)Ax 1703 peripheral bus (electrical)16 MbpsUSB-cable, length up to 3 mbus interface modulesCM-08421 peripheral elementCommunication withother automation units1 peripheral elementsbus interface modulesCM-0843peripheral elementsTM 1703 ACP(max. 16 PE)base unitTM 1703 ACPPE-6410PS-663xPE-6411PS-663x222333$

TM1703AfFfF-6014X1X11 X4X12X14X16X15X13WDER X5 X3X6X7X8X9X10SIM0/PK /LK/LK/PK RXERxTXSI3 SI2 SI1 SI0 LOCFBM-PRE/2M-PRE/3M-PRE/0M-PRE/1NCTBPWR24-60VDCPUSHTOUNLOCKERCOMCPYRYRESSI0SI2(FB)SI1(ETO)SI3RELEASEPUSHTORELEASEPUSHTOX2123456$10$10ONOFFS111 Configuration of Automation Units ACP 1703 Platforms, Configuration AU + Networks21 DC0-021-2.02, Ausgabedatum 07.2011 To one master control element one bus line with max. 16 peripheral elements can be connected. Each bus interface module CM-0842 has to be supplied separately. (18 VDC ... 78 VDC) The bus interface modules CM-0843 are supplied by the power supplies PS-663x. The power consumption of the CM-0843 (see technical data in data sheet) has to be considered on the PS-663x. In configurations with optical remoted TM 1703 ACP PEs 1000m-fibre cables cannot be used! Configuration switch CM-0842 1 .....F1/F2 ..... ON ....... 16 MBit 2 .....LINE2..... OFF...... PE(O) 3 .....AS2........ OFF...... 0 4 .....AS1........ OFF...... 0 5 .....AS0........ OFF...... 0 6 .....RED....... OFF...... CM-0842 7 .....LAD........ OFF...... inactive 8 .....LINE1..... ON ....... 1:1 Necessary modules and cables DesignationItem Number / MLFB Base unit TM 1703 ACP CP-6014Master control element CP-6014/CPCX65 GC6-014 / 6MF11130GA140AA0 CablePatch cable CAT5 (4x2) AWG26/7T41-255 (1m) / 6MF13040BC550AA0 T41-251 (2m) / 6MF13040BC510AA0 T41-252 (3m) / 6MF13040BC520AA0 CM-0843 Ax 1703-bus interface electricalGA0-843 / 6MF11110AJ430AA0 Bus interface modules CM-0842 Ax 1703-bus interface 4x FOGA0-842 / 6MF11110AJ420AA0 CableUSB-cableTC6-201 (1.5m) / 6MF13130GC010AA0TC6-202 (2m) / 6MF13130GC020AA0 TC6-203 (3m) / 6MF13130GC030AA0 FO-INDOORCABLE-200-DUP-BREAK-ROUND FO-CONNECTOR-ODLP-200 (2 pcs. per connection) TF7-035 TF7-015 Cable FO-OUTDOORCABLE-200-2FIB-ARMFO-CONNECTOR-ODLP-200 (2 pcs. per connection)FO-PIPE SPLITTER 2Y-LR1 (2 pcs. per connection)(only for outdoorcableTF7-036) TF7-036 TF7-015 TF7-066 PE-6410 peripheral coupling Ax-bus electricalGC6-410 / 6MF11130GE100AA0 Peripheral elements TM 1703 ACP PE-6411 peripheral coupling Ax-bus 1x opticalGC6-411 / 6MF11130GE110AA0 Configuration of Automation Units 22ACP 1703 Platforms, Configuration AU + Networks Ausgabedatum 07.2011, DC0-021-2.02 1.3Base Unit BC 1703 ACP/M with Peripheral Elements 1.3.1BC 1703 ACP/M TM 1703 ACP PE, optical I/O modules (max. 8)Ax 1703 peripheral bus (optical)16 MbpsFO, length up to 200 m1 peripheral elementperipheral elementsTM 1703 ACPbase unitBC 1703 ACP/MPE-6411PS-663x1181LS1RLM01L9 18 17 1 15 14 13 12 11 1u 198754321PALRRY$F2 F1+/ 0 ,9 B 76 5 43 2 1LS1RL To one master control elementCP-5014/CPCX55 one bus line with max.15 peripheral elements can be connected. The configuration shown can only be made with BC 1703 ACP/M. BC 1703 ACP/C is not suitable for it. In configurations with optical remoted TM 1703 ACP PEs 1000m-fibre cables cannot be used! The optical bus interface for the connection of external PE to the Ax 1703 PE-bus (CM-5807) is ordered over the configurator with the BC 1703 ACP/M.(slot position__1: N CP-5014/CPCX55,103-Slave, with ext. Ax PE-bus) Necessary modules and cables DesignationItem Number / MLFB Base unitBC 1703 ACP/M BC 1703 ACP/M Master control element CP-5014/CPCX55 is ordered via the configurator DC5-005 FO-INDOORCABLE-200-DUP-BREAK-ROUND FO-CONNECTOR-ODLP-200 (2 pcs. per connection) TF7-035 TF7-015 CableFO-OUTDOORCABLE-200-2FIB-ARMFO-CONNECTOR-ODLP-200 (2 pcs. per connection)FO-PIPE SPLITTER 2Y-LR1 (2 pcs. per connection)(only for outdoorcableTF7-036) TF7-036 TF7-015 TF7-066 Peripheral elements TM 1703 ACP PE-6411 peripheral coupling Ax-bus 1x opticalGC6-411 / 6MF11130GE110AA0 ACP 1703 Platforms, Configuration AU + Networks23 DC0-021-2.02, Edition 07.2011 2Configuration of Automation Networks Content2.1Serial Communication ........................................................................................24 2.2LAN Communication...........................................................................................68 2.3Fieldbus/Profibus Communication......................................................................74 Configuration of Automation Networks 24ACP 1703 Platforms, Configuration AU + Networks Edition 07.2011, DC0-021-2.02 2.1Serial Communication 2.1.1Point-to-point-traffic, IEC 60870-5-101, electrical Master AK 1703 ACPor TM 1703 ACPCable 1 PatchcableModem - masterTransmission networkModem - slaveSlavesCable 3 Modemcabledistance > 10 m:with plenum cable via wall socket or patch panel AK 1703 ACPModemModem Modem ModemModemModem Modem1 21TM 1703 mic231 1 1 1ESD EAR TH FAC ILITYPS-5620AK 1703TM 1703 ACPIEC 60870-5-104ESD EARTH FACILITYRY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER$PS-5620$1M 1703 ACPCP014X1X11 X4X12X14X16 X15X13WDER X5 X3X6X7X8X9X10SIM0/PK /LK/LK/PK RXERxTXSI3 SI2 SI1 SI0 LOCFBM-PRE/2M-PRE/3M-PRE/0M-PRE/1NCTBPWR24-60VDCPUSH TO UNLOCKERCOMCPYRYRESSI0SI2 (FB)SI1 (ETO)SI3RELEASEPUSHTORELEASEPUSHTOX21 2 3 45 6ESD EARTH FACILITYRY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER$PS-5620$1M 1703 ACPCP014X1X11 X4X12X14X16 X15X13WDER X5 X3X6X7X8X9X10SIM0/PK /LK/LK/PK RXERxTXSI3 SI2 SI1 SI0 LOCFBM-PRE/2M-PRE/3M-PRE/0M-PRE/1NCTBPWR24-60VDCPUSH TO UNLOCKERCOMCPYRYRESSI0SI2 (FB)SI1 (ETO)SI3RELEASEPUSHTORELEASEPUSHTOX212 3 45 6TM 1703 emicModem231 The length of the electrical cablebetween AK 1703 ACP respectively AK 1703 and the modem is: max. 15m when the modem is supplied externally (depending on baudrate) max. 3m when modem is supplied internally Hints for establishing an electrical connection of more than 10m length you can find in the appendix. For modem master and modem slave the same modem type has to be used. Details for supply of the modems you can find in the installation manualsAK 1703 ACP, TM 1703 ACP, TM 1703 emic, TM 1703 mic Configuration of Automation Networks ACP 1703 Platforms, Configuration AU + Networks25 DC0-021-2.02, Edition 07.2011 Necessary modules and cables DesignationItem Number / MLFB Master AK 1703 ACP CP-2010 systemfunction, processing and communication CM-2837 connect. comm./sys-I/O (CP-2010) BC2-010 / 6MF10130CA100AA0 BC2-837 / 6MF10130CJ370AA0 CP-2017 processing and communication CM-2838 connection communication (CP-2017) BC2-017 / 6MF10130CA170AA0 BC2-838 / 6MF10130CJ380AA0 SM-2551/BPPA0BC2-551 / 6MF10130CF510AA0 SM-2556 + SM-0551/BPPA0 BC2-556 / 6MF10130CF560AA + BC0-551 / 6MF10130AF510AA0 CM-2860 patch plug standard V28,ET,TRCA2-860 / 6MF12110CJ600AA0 MasterTM 1703 ACP CP-6014master control elementGC6-014 / 6MF11130GA140AA0 SM-2551/BPPA0BC2-551 / 6MF10130CF510AA0 SM-2556/BPPA0 + SM-0551/BPPA0 BC2-556 / 6MF10130CF560AA0 + BC0-551 / 6MF10130AF510AA0 CM-2860 patch plug standard V28,ET,TRCA2-860 / 6MF12110CJ600AA0 CablePatchcable CAT5 (4x2) AWG26/7T41-255(1m) / 6MF13040BC550AA0 T41-251(2m) / 6MF13040BC510AA0 T41-252(3m) / 6MF13040BC520AA0 T41-253(5m) / 6MF13040BC530AA0 T41-254(10m) / 6MF13040BC540AA0 Modem Master/Slave CE-0700 V.23 dedicated line modem f. 1703G21-200 / 6MF11020BC000AA0 CE-0701 - WT channel modem f. DIN-railG22-081 / 6MF11020CA810AA0 SlaveAK 1703 ACP CP-2010 systemfunction, processing and communication CM-2837 connect comm./sys-I/O (CP-2010) BC2-010 / 6MF10130CA100AA0 BC2-837 / 6MF10130CJ370AA0 CP-2017 processing and communication CM-2838 connection communication (CP-2017) BC2-017 / 6MF10130CA170AA0 BC2-838 / 6MF10130CJ380AA0 SM-2551/BPPA0BC2-551 / 6MF10130CF510AA0 CM-2860 patch plug standard V28,ET,TRCA2-860 / 6MF12110CJ600AA0 CablePatch cable CAT5 (4x2) AWG26/7T41-257 (0.3m) / 6MF13040BC570AA0 SlaveTM 1703 ACP CP-6014master control elementGC6-014 / 6MF11130GA140AA0 SM-2551/BPPA0BC2-5511 / 6MF10130CF510AA0 CM-2860 patch plug standard V28,ET,TRCA2-860/ 6MF12110CJ600AA0 CableModem-Cable for TM 1703 (e)mic and CE-070xTC6-210 / 6MF13130GC100AA0 Slave TM 1703 emic CP-6010 emicMaster Control Module BPPT0 GC6-010 / 6MF11130GA100AA0 SlaveTM 1703 mic CP-6020 mic Master Control M V.28/8 Mod.GC6-020 / 6MF11130GA200AA0 SlaveAK 1703 CP-2000 systemfunction CM-2857 connection comm./sys-I/O (CP-2000) BA2-000 / 6MF10110CA000AA0 BA2-857 / 6MF10110CJ570AA0 CP-2002 systemfunction, processing and communication CM-2858 connection communication (CP-2002) BA2-002 / 6MF10110CA020AA0 BA2-858 / 6MF10110CJ580AA0 SM-2551/BPPA0BC2-551 / 6MF10130CF510AA0 CM-2860 patch plug standard V28,ET,TRCA2-860 / 6MF12110CJ600AA0 Configuration of Automation Networks 26ACP 1703 Platforms, Configuration AU + Networks Edition 07.2011, DC0-021-2.02 2.1.2Point-to-point-traffic, IEC 60870-5-101, optical MasterAK 1703 ACPor TM 1703 ACPCable 1FO, length:0,5km using 50/125m fibre1,5km using 62,5/125m fibreSlavesTM 1703 ACPAK 1703 ACPCM-0827CM-08271 1ESD EAR TH FAC ILITYPS -5620AK 1703IEC 60870-5-104ESD EA RTH FA CILITYRY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER$P S-5620$TM 1703 ACPCP-6014X1X11 X4X12X14X16 X15X13WDER X5 X3X6X7X8X9X10SIM0/PK /LK/LK/PK RXERxTXSI3 SI2 SI1 SI0 LOCFBM-PRE/2M-PRE/3M-PRE/0M-PRE/1NCTBPWR24-60VDCPUSH TO UNLOCKERCOMCPYRYRESSI0SI2 (FB)SI1 (ETO)SI3RELEASEPUSHTORELEASE PUSHTOX2123 45 6ESD EARTH FACILITYRY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER$PS-5620$TM 1703 ACPCP-6014X1X11 X4X12X14X16 X15X13WDER X5 X3X6X7X8X9X10SIM0/PK /LK/LK /PK RXERxTXSI3 SI2 SI1 SI0 LOCFBM-PRE/2M-PRE/3M-PRE/0M-PRE/1NCTBPWR24-60VDCPUSH TO UNLOCKERCOMCPYRYRESSI0SI2 (FB)SI1 (ETO)SI3RELEASE PUSHTORELEASEPUSHTOX212 3 456TM 1703 emic On the CM-0827 (from version GA0-827-A on) line-idle state can be selected by a configuration switch Configuration switch CM-0827 line-idle state light on line-idle state light off Configuration of Automation Networks ACP 1703 Platforms, Configuration AU + Networks27 DC0-021-2.02, Edition 07.2011 Necessary modules and cables DesignationItem Number / MLFB Master AK 1703 ACP CP-2010 systemfunction, processing and communication CM-2837 connect comm./sys-I/O (CP-2010) BC2-010 / 6MF10130CA100AA0 BC2-837 / 6MF10130CJ370AA0 CP-2017 processing and communication CM-2838 connection communication (CP-2017) BC2-017 / 6MF10130CA170AA0 BC2-838 / 6MF10130CJ380AA0 SM-2551/BPPA0BC2-551 / 6MF10130CF510AA0 SM-2556 + SM-0551/BPPA0 BC2-556 / 6MF10130CF560AA0 + BC0-551 / 6MF10130AF510AA0 CM-2872 patch plug V28/opt. CM-0821/27 CM-0827 fibre optical interface (electrical-FO) CA2-872 / 6MF12110CJ720AA0 GA0-827 / 6MF11110AJ270AA0 MasterTM 1703 ACP CP-6014 master control elementGC6-014 / 6MF11130GA140AA0 SM-2551/BPPA0BC2-551 / 6MF10130CF510AA0 SM-2556 + SM-0551/BPPA0 BC2-556 / 6MF10130CF560AA0 + BC0-551 / 6MF10130AF510AA0 CM-2872 patch plug V28/opt. CM-0821/27 CM-0827 fibre optical interface (electrical-FO) CA2-872 / 6MF12110CJ720AA0 GA0-827 / 6MF11110AJ270AA0 Cable length:FO-INDOORCABLE-50-DUP-LSOH FO-OUTDOORCABLE-50-2FIB-ARM FO-CONNECTOR-ST-50/62 TF7-027 TF7-028 TF7-016 length: FO-INDOORCABLE-62-DUP-LSOH FO-OUTDOORCABLE-62-2FIB-ARM FO-CONNECTOR-ST-50/62 TF7-006 TF7-007 TF7-016 SlaveAK 1703 ACP CP-2010 systemfunction, processing and communication CM-2837 connect comm./sys-I/O (CP-2010) BC2-010 / 6MF10130CA100AA0 BC2-837 / 6MF10130CJ370AA0 CP-2017 processing and communication CM-2838 connection communication (CP-2017) BC2-017 / 6MF10130CA170AA0 BC2-838 / 6MF10130CJ380AA0 SM-2551/BPPA0BC2-551 / 6MF10130CF510AA0 CM-2872 patch plug V28/opt. CM-0821/27 CM-0827 fibre optical interface (electrical-FO) CA2-872 / 6MF12110CJ720AA0 GA0-827 / 6MF11110AJ270AA0 SlaveTM 1703 ACP CP-6014 master control elementGC6-014 / 6MF11130GA140AA0 SM-2551/BPPA0BC2-551 / 6MF10130CF510AA0 CM-2872 patch plug V28/opt. CM-0821/27 CM-0827 fibre optical interface (electrical-FO) CA2-872 / 6MF12110CJ720AA0 GA0-827 / 6MF11110AJ270AA0 Slave TM 1703 emic CP-6010 emicMaster Control Module BPPT0 CM-0827 fibre optical interface (electrical-FO) Modular coupling RJ-45 9-pol. D-SUB female GC6-010 / 6MF11130GA100AA0 GA0-827 / 6MF11110AJ270AA0 TF5-101 / 6MF13140FB010AA0 SlaveTM 1703 mic CP-6020 mic Master Control M V.28/8 Mod CM-0827 fibre optical interface (electrical-FO) Modular coupling RJ-45 9-pol. D-SUB female GC6-020 / 6MF11130GA200AA0 GA0-827 / 6MF11110AJ270AA0 TF5-101 / 6MF13140FB010AA0 SlaveAK 1703 CP-2000 systemfunction CM-2857 connection comm./sys-I/O (CP-2000) BA2-000 / 6MF10110CA000AA0 BA2-857 / 6MF10110CJ570AA0 CP-2002 systemfunction, processing and communication CM-2858 connection communication (CP-2002) BA2-002 / 6MF10110CA020AA0 BA2-858 / 6MF10110CJ580AA0 SM-2551/BPPA0BC2-551 / 6MF10130CF510AA0 CM-2872 patch plug V28/opt. CM-0821/27 CM-0827 fibre optical interface (electrical-FO) CA2-872 / 6MF12110CJ720AA0 GA0-827 / 6MF11110AJ270AA0 Configuration of Automation Networks 28ACP 1703 Platforms, Configuration AU + Networks Edition 07.2011, DC0-021-2.02 2.1.3Multi-point Traffic, IEC 60870-5-101 or -103, electrical Zentrale AK 1703 ACPoder TM 1703 ACPModem - ZentralebertragungsnetzModem - UnterstationUnterstationenKabel, Patchkabel1 2Kabel Modemkabel3Kabel Patchkabel1Entfernung > 10 m:mit Plenumkabel ber Wanddose oder Patchpanel Modem ModemModem ModemModem1 23 1TM 1703 ACPAK 1703 ACPTM 1703 mic1ESD EARTH FA CILITYPS-5620AK 1703IEC 60870-5-104ESD EARTH FAC ILITYRY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER$PS-5620$TM 1703 ACPCP-6014X1X11 X4X12X14X16 X15X13WDER X5 X3X6X7X8X9X10SIM0/PK /LK/LK /PK RXERxTXSI3 SI2 SI1 SI0 LOCFBM-PRE/2M-PRE/3M-PRE/0M-PRE/1NCTBPWR24-60VDCPUSH TO UNLOCKERCOMCPYRYRESSI0SI2 (FB)SI1 (ETO)SI3RELEASE PUSHTORELEASEPUSHTOX21 2 3 45 6ESD EARTH FAC ILITYRY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER$PS-5620$TM 1703 ACPCP-6014X1X11 X4X12X14X16 X15X13WDER X5 X3X6X7X8X9X10SIM0/PK /LK/LK/PK RXERxTXSI3 SI2 SI1 SI0 LOCFBM-PRE/2M-PRE/3M-PRE/0M-PRE/1NCTBPWR24-60VDCPUSH TO UNLOCKERCOMCPYRYRESSI0SI2 (FB)SI1 (ETO)SI3RELEASEPUSHTORELEASE PUSHTOX212 345 6TM 1703 emicModem23 The length of the electrical cablebetween AK 1703 ACP respectively AK 1703 and the modem is: max. 15m when the modem is supplied externally (depending on baudrate) max. 3m when modem is supplied internally Hints for establishing an electrical connection of more than 10m length you can find in the appendix. For modem master and modem slave the same modem types have to be used. Details for supply of the modems you can find in the installation manualsAK 1703 ACP, TM 1703 ACP, TM 1703 emic, TM 1703 mic Multi-point traffic according to IEC 60870-5-103 is not possible with TM 1703 emic and TM 1703 mic Configuration of Automation Networks ACP 1703 Platforms, Configuration AU + Networks29 DC0-021-2.02, Edition 07.2011 Necessary modules and cables DesignationItem Number / MLFB Master AK 1703 ACP CP-2010 systemfunction, processing and communication CM-2837 connect comm./sys-I/O (CP-2010) BC2-010 / 6MF10130CA100AA0 BC2-837 / 6MF10130CJ370AA0 CP-2017 processing and communication CM-2838 connection communication (CP-2017) BC2-017 / 6MF10130CA170AA0 BC2-838 / 6MF10130CJ380AA0 UMPMA0103MA0 SM-2551XXBC2-551 / 6MF10130CF510AA0 SM-2556 + SM-0551 X X BC2-556 / 6MF10130CF560AA0 + BC0-551 / 6MF10130AF510AA0 CM-2860 patch plug standard V28,ET,TRCA2-860 / 6MF12110CJ600AA0 MasterTM 1703 ACP CP-60014master control elementGC6-014 / 6MF11130GA140AA0 UMPMA0103MA0 SM-2551XXBC2-551 / 6MF10130CF510AA0 SM-2556 + SM-0551 X X BC2-556 / 6MF10130CF560AA0 + BC0-551 / 6MF10130AF510AA0 CM-2860 patch plug standard V28,ET,TRCA2-860 / 6MF12110CJ600AA0 CablePatchcable CAT5 (4x2) AWG26/7T41-255(1m) / 6MF13040BC550AA0 T41-251(2m) / 6MF13040BC510AA0 T41-252(3m) / 6MF13040BC520AA0 T41-253(5m) / 6MF13040BC530AA0 T41-254(10m) / 6MF13040BC540AA0 Modem Master/Slave CE-0700 V.23 dedicated line modem f. 1703G21-200 / 6MF11020BC000AA0 CE-0701 - WT channel modem f. DIN-railG22-081 / 6MF11020CA810AA0 SlaveAK 1703 ACP CP-2010 systemfunction, processing and communication CM-2837 connect comm./sys-I/O (CP-2010) BC2-010 / 6MF10130CA100AA0 BC2-837 / 6MF10130CJ370AA0 CP-2017 processing and communication CM-2838 connection communication (CP-2017) BC2-017 / 6MF10130CA170AA0 BC2-838 / 6MF10130CJ380AA0 UMPSA0103SA0 SM-2551XXBC2-551 / 6MF10130CF510AA0 CM-2860 patch plug standard V28,ET,TRCA2-860 / 6MF12110CJ600AA0 Cable Patch cable CAT5 (4x2) AWG26/7T41-257 (0.3m) / 6MF13040BC570AA0 SlaveTM 1703 ACP CP-6014 master control elementGC6-014 / 6MF11130GA140AA0 UMPSA0103SA0 SM-2551XXBC2-551 / 6MF10130CF510AA0 CM-2860 patch plug standard V28,ET,TRCA2-860 / 6MF12110CJ600AA0 Cable Modem-Cable for TM 1703 mic and CE-070xTC6-210 / 6MF13130GC100AA0 Slave TM 1703 emic acc. toIEC 60870-5-101 CP-6010 emicMaster Control Module UMPST0 GC6-010 / 6MF11130GA100AA0 SlaveTM 1703 mic acc. toIEC 60870-5-101 CP-6020 mic Master Control M V.28/8 ModGC6-020 / 6MF11130GA200AA0 Configuration of Automation Networks 30ACP 1703 Platforms, Configuration AU + Networks Edition 07.2011, DC0-021-2.02 DesignationItem Number / MLFB SlaveAK 1703 CP-2000 systemfunction CM-2857 connection comm./sys-I/O (CP-2000) BA2-000 / 6MF10110CA000AA0 BA2-857 / 6MF10110CJ570AA0 CP-2002 systemfunction, processing and communication CM-2858 connection communication (CP-2002) BA2-002 / 6MF10110CA020AA0 BA2-858 / 6MF10110CJ580AA0 UMPSA0103SA0 SM-2551 XXBC2-551 / 6MF10130CF510AA0 CM-2860 patch plug standard V28,ET,TRCA2-860 / 6MF12110CJ600AA0 Configuration of Automation Networks ACP 1703 Platforms, Configuration AU + Networks31 DC0-021-2.02, Edition 07.2011 2.1.4Multi-point Traffic, IEC 60870-5-101 or 103, optical, Star MasterAK 1703 ACP (redundancy possible) or TM 1703 ACPSlavesFieldbusinterfacesPS-663x, CM-0821, CM-0822Cable 2FO, length:0,5km using 50/125m fibre1,5km using 62,5/125m fibreSettings on theconfiguration switchesCM-0821 Master-Module ASettings on theconfiguration switchCM-0822 Slave-Module BCable 1Patchcable, length max. 3 mCable 2FO, length:0,5km using 50/125m fibre1,5km using 62,5/125m fibreIEC 60870-5-104CM-0827TM 1703 ACPAK 1703 ACPCM-08271 22 2ESD EARTH FACILITYPS-5620AK 1703BC 1703 ACPTM 1703 micFFONFFONESD EARTH FACILITYRY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER$ PS-5620$TM !703 ACPCP60!4X1X11 X4X12X14X16 X15X13WDER X5 X3X6X7X8X9X10SIM0/PK /LK/LK /PK RXERxTXSI3 SI2 SI1 SI0 LOCFBM-PRE/2M-PRE/3M-PRE/0M-PRE/1NCTBPWR24-60VDCPUSH TO UNLOCKERCOMCPYRYRESSI0SI2 (FB)SI1 (ETO)SI3RELEASE PUSHTORELEASE PUSHTOX2123 45 6ESD EARTH FACILITYRY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER$PS-5 620$TM !703 ACPCP60!4X1X11 X4X12X14X16 X15X13WDER X5 X3X6X7X8X9X10SIM0/PK /LK/LK /PK RXERxTXSI3 SI2 SI1 SI0 LOCFBM-PRE/2M-PRE/3M-PRE/0M-PRE/1NCTBPWR24-60VDCPUSH TO UNLOCKERCOMCPYRYRESSI0SI2 (FB)SI1 (ETO)SI3RELEASE PUSHTORELEASE PUSHTOX2123 4 5 6TTESTREMOTE9 !8 !7 !6 !5 !1 !J !2 !! !O !987651J2! P/ lR RY$F2 F1+|0 ,9 8 76 5 43 2 1QESCCTRL8764321 5OFFTM 1703 emic2222 Power supply of the fieldbus interfaces PS-663x (redundant power supply is supported, but not to increase power) via the electrical interface direct from the master, if only one fieldbus interface (CM-0821) is used With one PS-663x max. 6fieldbus interfaces CM-0821 and/or CM-0822 can be supplied. On the CM-0827 (from version GA0-827-A on) line-idle state can be selected by a configuration switch Configuration switch CM-0827 line-idle state light on line-idle state light off Redundant automation units (masters) are only possible in AK 1703 ACP. A redundancy board rack CM-2816 (SCA-RS) is necessary. Details you can find in the chapter Redundant Automation Units. Multi-point traffic according toIEC 60870-5-103 is not possible with TM 1703 emic and TM 1703 mic. CM-0821 master-module A Configuration switch S1 1.... Rate 0 .......... OFF... ) 2.... Rate 1 .......... ON .... )...... e.g. baudrate 19 200 3.... Rate 2 .......... OFF... ) 4.... Rate 3 .......... ON .... ) 5.... Star/ring ....... OFF... star 6.... Level-CH3.... OFF... line-idle state...... light off 7.... Level-CH2.... OFF... line-idle state...... light off 8.... Level-CH1.... OFF... line-idle state...... light off Configuration switch S2 L..................... ON ..... ) master (single) R .................... ON ..... ) master (single) 10/11 .............. ON ..... 11 Bit word length CM-0822 slave-module B 1.... Rate 0 .......... ON .... ) 2.... Rate 1 .......... OFF... )...... e.g. baudrate 19 200 3.... Rate 2 .......... ON .... ) 4.... Master/slave. ON .... slave 5.... Level-CH4.... OFF... line-idle state...... light off 6.... Level-CH3.... OFF... line-idle state...... light off 7.... Level-CH2.... OFF... line-idle state...... light off 8.... Level-CH1.... OFF... line-idle state...... light off Configuration of Automation Networks 32ACP 1703 Platforms, Configuration AU + Networks Edition 07.2011, DC0-021-2.02 Necessary modules and cables DesignationItem Number / MLFB Master AK 1703 ACP electrical CP-2010 systemfunction, processing and communication CM-2837 connect comm./sys-I/O (CP-2010) BC2-010 / 6MF10130CA100AA0 BC2-837 / 6MF10130CJ370AA0 CP-2017 processing and communication CM-2838 connection communication (CP-2017) BC2-017 / 6MF10130CA170AA0 BC2-838 / 6MF10130CJ380AA0 UMPMA0103MA0 SM-2551 XXBC2-551 / 6MF10130CF510AA0 SM-2556+ SM-0551 X X BC2-556 / 6MF10130CF560AA0 + BC0-551 / 6MF10130AF510AA0 CM-2860 patch plug standard V28,ET,TRCA2-860 / 6MF12110CJ600AA0 Master AK 1703 ACP redundant optical CP-2010 systemfunction, processing and communication CM-2837 connect comm./sys-I/O (CP-2010) BC2-010 / 6MF10130CA100AA0 BC2-837 / 6MF10130CJ370AA0 CP-2017 processing and communication CM-2838 connection communication (CP-2017) BC2-017 / 6MF10130CA170AA0 BC2-838 / 6MF10130CJ380AA0 UMPMA0103MA0 SM-2551 XXBC2-551 / 6MF10130CF510AA0 SM-2556+ SM-0551 X X BC2-556 / 6MF10130CF560AA0 + BC0-551 / 6MF10130AF510AA0 CM-2872 patch plug V28/opt. CM-0821/27 CM-0827 fibre optical interface (electrical-FO) CA2-872 / 6MF12110CJ720AA0 GA0-827 / 6MF11110AJ270AA0 MasterTM 1703 ACP CP-6014 master control elementGC6-014 / 6MF11130GA140AA0 UMPMA0103MA0 SM-2551 XXBC2-551 / 6MF10130CF510AA0 SM-2556+ SM-0551 X X BC2-556 / 6MF10130CF560AA0 + BC0-551 / 6MF10130AF510AA0 CM-2860 patch plug standard V28,ET,TRCA2-860 / 6MF12110CJ600AA0 CablePatch cable CAT5 (4x2) AWG26/7T41-255 (1m) / 6MF13040BC550AA0 T41-251 (2m) / 6MF13040BC510AA0 T41-252 (3m) / 6MF13040BC520AA0 Fieldbus interfacesCM-0821 Fieldbus interface ring (3xFO, 1xel.) CM-0822 Fieldbus interface star (4xFO) GA0-821 / 6MF11110AJ210AA0 GA0-822 / 6MF11110AJ220AA0 Cable length:FO-INDOORCABLE-50-DUP-LSOH FO-OUTDOORCABLE-50-2FIB-ARM FO-CONNECTOR-ST-50/62 TF7-027 TF7-028 TF7-016 length: FO-INDOORCABLE-62-DUP-LSOH FO-OUTDOORCABLE-62-2FIB-ARM FO-CONNECTOR-ST-50/62 TF7-006 TF7-007 TF7-016 Configuration of Automation Networks ACP 1703 Platforms, Configuration AU + Networks33 DC0-021-2.02, Edition 07.2011 DesignationItem Number / MLFB SlaveAK 1703 ACP CP-2010 systemfunction, processing and communication CM-2837 connect comm./sys-I/O (CP-2010) BC2-010 / 6MF10130CA100AA0 BC2-837 / 6MF10130CJ370AA0 CP-2017 processing and communication CM-2838 connection communication (CP-2017) BC2-017 / 6MF10130CA170AA0 BC2-838 / 6MF10130CJ380AA0 UMPSA0103SA0 SM-2551XXBC2-551 / 6MF10130CF510AA0 CM-2872 patch plug V28/opt. CM-0821/27 CM-0827 fibre optical interface (electrical-FO) CA2-872 / 6MF12110CJ720AA0 GA0-827 / 6MF11110AJ270AA0 SlaveTM 1703 ACP CP-6014 master control elementGC6-014 / 6MF11130GA140AA0 UMPSA0103SA0 SM-2551XXBC2-551 / 6MF10130CF510AA0 CM-2872 patch plug V28/opt. CM-0821/27 CM-0827 fibre optical interface (electrical-FO) CA2-872 / 6MF12110CJ720AA0 GA0-827 / 6MF11110AJ270AA0 Slave TM 1703 emic acc. toIEC 60870-5-101 CP-6010 emicMaster Control Module UMPST0 CM-0827 fibre optical interface (electrical-FO) Modular coupling RJ-45 9-pol. D-SUB female GC6-010 / 6MF11130GA100AA0 GA0-827 / 6MF11110AJ270AA0 TF5-101 / 6MF13140FB010AA0 SlaveTM 1703 mic acc. toIEC 60870-5-101 CP-6020 mic Master Control M V.28/8 Mod CM-0827 fibre optical interface (electrical-FO) Modular coupling RJ-45 9-pol. D-SUB female GC6-020 / 6MF11130GA200AA0 GA0-827 / 6MF11110AJ270AA0 TF5-101 / 6MF13140FB010AA0 Slave BC 1703 ACP CP-5014 central processingBC5-014 / 6MF10130FA140AA0 acc. toIEC 60870-5-101 SM-2551/UMPSA0BC2-551 / 6MF10130CF510AA0 CM-5860 Patch Modulestandard V28,ET CM-0827 fibre optical interface (electrical-FO) CC5-860 / 6MF12130FJ600AA0 GA0-827 / 6MF11110AJ270AA0 Slave BC 1703 ACP acc. toIEC 60870-5-103 local interface CP-5014 central processing 103SX5 CPCX55 master data for 103SX5 local optical interface on CM-5014 available BC5-014 / 6MF10130FA140AA0 SC5-598 SlaveAK 1703 CP-2000 systemfunction CM-2857 connection comm./sys-I/O (CP-2000) BA2-000 / 6MF10110CA000AA0 BA2-857 / 6MF10110CJ570AA0 CP-2002 systemfunction, processing and communication CM-2858 connection communication (CP-2002) BA2-002 / 6MF10110CA020AA0 BA2-858 / 6MF10110CJ580AA0 UMPSA0103SA0 SM-2551XXBC2-551 / 6MF10130CF510AA0 CM-2872 patch plug V28/opt. CM-0821/27 CM-0827 fibre optical interface (electrical-FO) CA2-872 / 6MF12110CJ720AA0 GA0-827 / 6MF11110AJ270AA0 Configuration of Automation Networks 34ACP 1703 Platforms, Configuration AU + Networks Edition 07.2011, DC0-021-2.02 2.1.5Multi-point Traffic, IEC 60870-5-101 or 103, optical, Ring Master AK 1703 ACPor TM 1703 ACPSlavesFieldbusinterfaces in the ringCM-0821Settings on theconfiguration switchesCM-0821 Master-Module ASettings on theconfiguration switchesCM-0821 Slave-Module Brotate180CH1 and CH2on CM-0821Cable 1Patchcable, length max. 3 mCable 2FO, length:1,3km using 62,5/125m fibreCable 1Patchcable, length max. 3 mAK 1703 ACPTM 1703 ACP12222 21 1 1 1BC 1703 ACPESD EARTH FACILITYPS-56 20AK 1703IEC 60870-5-104ESD EARTH FACILITYR Y E R R Y E R RY ER R Y E R R Y ER RY ER R Y E R RY ER R Y E R R Y E R RY ER R Y E R R Y ER R Y E R R Y E R RY ER R Y E R$PS-56 20$lM 1703 AClCl6014X1X11 X4X12X14X16 X15X13WDER X5 X3X6X7X8X9X10SIM0/PK /LK/LK /PK RXERxTXSI3 SI2 SI1 SI0 LOCFBM-PRE/2M-PRE/3M-PRE/0M-PRE/1NCTBPWR24-60VDCPUSH TO UNLOCKERCOMCPYRYRESSI0SI2 (FB)SI1 (ETO)SI3RELEASE PUSHTORELEASE PUSHTOX2123 456T8TESTREMCTE9 18 17 16 15 11 1J 12 11 1O 1987651J21 PA lR RY$F2 F1+|- 0 ,9 8 76 5 43 2 1QESCCTRL$lM 1703 AClCl6014X1X11 X4X12X14X16 X15X13WDER X5 X3X6X7X8X9X10SIM0/PK /LK/LK /PK RXERxTXSI3 SI2 SI1 SI0 LOCFBM-PRE/2M-PRE/3M-PRE/0M-PRE/1NCTBPWR24-60VDCPUSH TO UNLOCKERCOMCPYRYRESSI0SI2 (FB)SI1 (ETO)SI3RELEASE PUSHTORELEASE PUSHTOX2123 456ESD EARTH FACILITYR Y ER R Y E R R Y E R R Y ER R Y E R R Y E R R Y E R R Y E R R Y ER R Y E R R Y E R RY ER R Y E R RY ER R Y E R R Y E R RY ER$ PS- 5620FFONFFONFFONFFONX2X1X4X3RX2RX1CH2CH1TX2TX1 Power supply of the fieldbus interfaces via the electrical interface direct from the master or slave (SM-x551), if only one fieldbus interface (CM-0821) is used Due to the higher data rate in a ring configuration a 62,5/125m fibre has to be used. CM-0821 master-module A Configuration switch S1 1 .... Rate 0........... OFF... ) 2 .... Rate 1........... ON..... )...... e.g. baudrate 19 200 3 .... Rate 2........... OFF... ) 4 .... Rate 3........... ON..... ) 5 .... Stern/ring...... ON..... ring 6 .... Level-CH3 .... OFF... line-idle state...... light off 7 .... Level-CH2 .... ON..... line-idle state...... light on 8 .... Level-CH1 .... ON..... line-idle state...... light on Configuration switch S2 L ..................... ON...... ) master (single) R..................... ON...... ) master (single) 10/11 .............. ON...... 11 Bit word length The local interface of the BC 1703 ACP cannot be used in the ring (no failure signalling at ring disturbances). In ring configurations only SM-2551 and SM-0551 can be used. CM-0821 slave-module B Configuration switch S1 1 .... Rate 0........... OFF... ) 2 .... Rate 1........... ON..... )...... e.g. baudrate 19 200 3 .... Rate 2........... OFF... ) 4 .... Rate 3........... ON..... ) 5 .... Star/ring........ ON..... ring 6 .... Level-CH3 .... OFF... line-idle state...... light off 7 .... Level-CH2 .... ON..... line-idle state...... light on 8 .... Level-CH1 .... ON..... line-idle state...... light on Configuration switch S2 L ..................... OFF....) slave R..................... OFF....) slave 10/11............... ON......11 Bit word length Configuration of Automation Networks ACP 1703 Platforms, Configuration AU + Networks35 DC0-021-2.02, Edition 07.2011 Necessary modules and cables DesignationItem Number / MLFB Master AK 1703 ACP CP-2010 systemfunction, processing and communication CM-2837 connect comm./sys-I/O (CP-2010) BC2-010 / 6MF10130CA100AA0 BC2-837 / 6MF10130CJ370AA0 CP-2017 processing and communication CM-2838 connection communication (CP-2017) BC2-017 / 6MF10130CA170AA0 BC2-838 / 6MF10130CJ380AA0 UMPMA0103MA0 SM-2551XXBC2-551 / 6MF10130CF510AA0 SM-2556 + SM-0551 X X BC2-556 / 6MF10130CF560AA0 + BC0-551 / 6MF10130AF510AA0 CM-2860 patch plug standard V28,ET,TRCA2-860 / 6MF12110CJ600AA0 MasterTM 1703 ACP CP-6014 master control elementGC6-014 / 6MF11130GA140AA0 UMPMA0103MA0 SM-2551XXBC2-551 / 6MF10130CF510AA0 SM-2556 + SM-0551 X X BC2-556 / 6MF10130CF560AA0 + BC0-551 / 6MF10130AF510AA0 CM-2860 patch plug standard V28,ET,TRCA2-860 / 6MF12110CJ600AA0 CablePatch cable CAT5 (4x2) AWG26/7T41-255 (1m) / 6MF13040BC550AA0T41-251 (2m) / 6MF13040BC510AA0T41-252 (3m) / 6MF13040BC520AA0 Fieldbus interfacesCM-0821 fieldbus interface ring (3xFO, 1xel.)GA0-821 / 6MF11110AJ210AA0 Cable length:FO-INDOORCABLE-62-DUP-LSOH FO-OUTDOORCABLE-62-2FIB-ARM FO-CONNECTOR-ST-50/62 TF7-006 TF7-007 TF7-016 SlaveAK 1703 ACP CP-2010 systemfunction, processing and communication CM-2837 connect comm./sys-I/O (CP-2010) BC2-010 / 6MF10130CA100AA0 BC2-837 / 6MF10130CJ370AA0 CP-2017 processing and communication CM-2838 connection communication (CP-2017) BC2-017 / 6MF10130CA170AA0 BC2-838 / 6MF10130CJ380AA0 UMPSA0103SA0 SM-2551XXBC2-551 / 6MF10130CF510AA0 CM-2860 patch plug standard V28,ET,TRCA2-860 / 6MF12110CJ600AA0 SlaveTM 1703 ACP CP-6014 master control elementGC6-014 / 6MF11130GA140AA0 UMPSA0103SA0 SM-2551XXBC2-551 / 6MF10130CF510AA0 CM-2860 patch plug standard V28,ET,TRCA2-860 / 6MF12110CJ600AA0 SlaveBC 1703 ACP CP-5014 central processingBC5-014 / 6MF10130FA140AA0 UMPSA0103SA0 SM-2551XXBC2-551 / 6MF10130CF510AA0 CM-5860 Patch Module standard V28,ETCC5-860 / 6MF12130FJ600AA0 SlaveAK 1703 CP-2000 systemfunction CM-2857 connection comm./sys-I/O (CP-2000) BA2-000 / 6MF10110CA000AA0 BA2-857 / 6MF10110CJ570AA0 CP-2002 systemfunction, processing and communication CM-2858 connection communication (CP-2002) BA2-002 / 6MF10110CA020AA0 BA2-858 / 6MF10110CJ580AA0 UMPSA0103SA0 SM-2551XXBC2-551 / 6MF10130CF510AA0 CM-2860 patch plug standard V28,ET,TRCA2-860 / 6MF12110CJ600AA0 Configuration of Automation Networks 36ACP 1703 Platforms, Configuration AU + Networks Edition 07.2011, DC0-021-2.02 2.1.6Multi-point Traffic, IEC 60870-5-101 or 103, optical, Ring+Star Master AK 1703 ACPor TM 1703 ACPCable 1Patchcable,max. 3 m length SlavesFieldbusinterfacesPS-663x, CM-0821, CM-0822Cable 3 RingFO, length max.1,3km using 62,5/125m-fibreSettings on theconfiguration switchesCM-0821 Ring/Master ASettings on theconfiguration switchesCM-0821 Ring/Slave Brotate180CH1 andCH2onCM-0821Settings on theconfiguration switchCM-0822 Slave-Module DSlavesFieldbusinterfacesPS-663x,CM-0822 Settings on theconfiguration switchCM-0822 Slave-Module DCable 2FO, length max.0,5km using 50/125m-fibre1,5km using 62,5/125m-fibreFieldbusinterfacesCM-0821Cable 1Patchcable,max. 3 m length Cable 2FO, length max.0,5km using 50/125m-fibre1,5km using 62,5/125m-fibreCable 2FO, length max.0,5km using 50/125m-fibre1,5km using 62,5/125m-fibreSettings on theconfiguration switchesCM-0821 Star/MasterECable Patchcable, max. 3 m length FieldbusinterfaceCM-0821Settings on theconfiguration switchCM-0822 Master-Module CAK 1703 ACPTM 1703 ACPCM-0827TM 1703 ACPAK 1703 ACPTM 1703 micX2X1X4X3RX2RX1CH2CH1TX2TX18764321 5OFF1231 1 1 1122222232323 232AK 1703 ACPTM 1703 micBC 1703 ACPBC 1703 ACPESD EARTH FAC ILITYP S-5620AK 1703ESD EA RTH FA CILITYPS -5620AK 1703IEC 60870-5-104ESD EA RTH FA CILITYRY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER$ PS-5620$1M 1703 AClCl-6014X1X11 X4X12X14X16 X15X13WDER X5 X3X6X7X8X9X10SIM0/PK /LK/LK /PK RXERxTXSI3 SI2 SI1 SI0 LOCFBM-PRE/2M-PRE/3M-PRE/0M-PRE/1NCTBPWR24-60VDCPUSH TO UNLOCKERCOMCPYRYRESSI0SI2 (FB)SI1 (ETO)SI3RELEASEPUSHTORELEASE PUSHTOX2123 4 5 61 81LS1RLMO1L9 18 17 16 1b 14 13 12 11 10 19876b4321 lA lk k$F2 F1+|- 0 ,9 8 7o 5 43 2 1QLSCC1 RL181 LS1RLMO1 L9 18 17 16 1b 14 13 12 11 10 19876b4321 lA lk k$ F2 F1+|- 0 ,9 8 7o 5 43 2 1QLSCC1RL$1M 1703 AClCl-6014X1X11 X4X12X14X16 X15X13WDER X5 X3X6X7X8X9X10SIM0/PK /LK/LK/PK RXERxTXSI3 SI2 SI1 SI0 LOCFBM-PRE/2M-PRE/3M-PRE/0M-PRE/1NCTBPWR24-60VDCPUSH TO UNLOCKERCOMCPYRYRESSI0SI2 (FB)SI1 (ETO)SI3RELEASE PUSHTORELEASEPUSHTOX21 2 34 56$1M 1703 AClCl-6014X1X11 X4X12X14X16 X15X13WDER X5 X3X6X7X8X9X10SIM0/PK /LK/LK /PK RXERxTXSI3 SI2 SI1 SI0 LOCFBM-PRE/2M-PRE/3M-PRE/0M-PRE/1NCTBPWR24-60VDCPUSH TO UNLOCKERCOMCPYRYRESSI0SI2 (FB)SI1 (ETO)SI3RELEASEPUSHTORELEASEPUSHTOX21 2 34 56ES D EA RTH FA CILITYRY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER$ PS-5620ESD EARTH FAC ILITYRY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER$P S-5620FFONFFONFFONFFONFFONFFON8764321 5OFF8764321 5OFFTM 1703 emicTM 1703 emic2 2 2 Configuration of Automation Networks ACP 1703 Platforms, Configuration AU + Networks37 DC0-021-2.02, Edition 07.2011 Power supply of the fieldbus interfaces PS-663x (redundant power supply is supported, but not to increase power) via the electrical interface direct from the master or slave, if only one fieldbus interface (CM-0821) is used Due to the higher data rate in a ring configuration a 62,5/125m fibre has to be used. In ring configurations only SM-2551 andSM-0551 can be used. CM-0821 ring/master-module A Configuration switch S1 1.....Rate 0...........OFF ...) 2.....Rate 1...........ON.....).......e.g. baudrate 19 200 3.....Rate 2...........OFF ...) 4.....Rate 3...........ON.....) 5.....Star/ring........ON.....ring 6.....Level-CH3.....OFF ...line-idle state.......light off 7.....Level-CH2.....ON.....line-idle state.......light on 8.....Level-CH1.....ON.....line-idle state.......light on Configuration switch S2 L....................... ON ..... ) master (single) R ...................... ON ..... ) master (single) 10/11................ ON ..... 11 Bit word length CM-0821 ring/slave-module B Configuration switch S1 1.....Rate 0...........OFF ...) 2.....Rate 1...........ON.....).......e.g. baudrate 19 200 3.....Rate 2...........OFF ...) 4.....Rate 3...........ON.....) 5.....Star/ring........ON.....ring 6.....Level-CH3.....OFF ...line-idle state.......light off 7.....Level-CH2.....ON.....line-idle state.......light on 8.....Level-CH1.....ON.....line-idle state.......light on Configuration switch S2 L....................... OFF.... ) slave R ...................... OFF.... ) slave 10/11................ ON ..... 11 Bit word length The local interface of the BC 1703 ACP cannot be used in the ring (no failure signalling at ring disturbances). With one PS-663x max. 6fieldbus interfaces CM-0821 and/orCM-0822 can be supplied. On the CM-0827 (from version GA0-827-A on) line-idle state can be selected by a configuration switch Configuration switch CM-0827 line-idle state light on line-idle state light off Multi-point traffic according toIEC 60870-5-103 is not possible with TM 1703 emic, TM 1703 mic. CM-0822 master-module C 1.... Rate 0 .......... ON .... ) 2.... Rate 1 .......... OFF... )...... e.g. baudrate 19 200 3.... Rate 2 .......... ON .... ) 4.... Master/slave. OFF... master 5.... Level-CH4.... OFF... line-idle state...... light off 6.... Level-CH3.... OFF... line-idle state...... light off 7.... Level-CH2.... OFF... line-idle state...... light off 8.... Level-CH1.... OFF... line-idle state...... light off CM-0822 slave-module D 1.... Rate 0 .......... ON .... ) 2.... Rate 1 .......... OFF... )...... e.g. baudrate 19 200 3.... Rate 2 .......... ON .... ) 4.... Master/slave. ON .... slave 5.... Level-CH4.... OFF... line-idle state...... light off 6.... Level-CH3.... OFF... line-idle state...... light off 7.... Level-CH2.... OFF... line-idle state...... light off 8.... Level-CH1.... OFF... line-idle state...... light off CM-0821 star/master-module E Configuration switch S1 1.... Rate 0 .......... OFF... ) 2.... Rate 1 .......... ON .... )...... e.g. baudrate 19 200 3.... Rate 2 .......... OFF... ) 4.... Rate 3 .......... ON .... ) 5.... Star/ring ....... OFF... star 6.... Level-CH3.... OFF... line-idle state...... light off 7.... Level-CH2.... OFF... line-idle state...... light off 8.... Level-CH1.... OFF... line-idle state...... light off Configuration switch S2 L....................... ON ..... ) master (single) R ...................... ON ..... ) master (single) 10/11 ................ ON ..... 11 Bit word length Configuration of Automation Networks 38ACP 1703 Platforms, Configuration AU + Networks Edition 07.2011, DC0-021-2.02 Necessary modules and cables DesignationItem Number / MLFB Master AK 1703 ACP CP-2010 systemfunction, processing and communication CM-2837 connect comm./sys-I/O (CP-2010) BC2-010 / 6MF10130CA100AA0 BC2-837 / 6MF10130CJ370AA0 CP-2017 processing and communication CM-2838 connection communication (CP-2017) BC2-017 / 6MF10130CA170AA0 BC2-838 / 6MF10130CJ380AA0 UMPMA0103MA0 SM-2551XXBC2-551 / 6MF10130CF510AA0 SM-2556+ SM-0551 X X BC2-556 / 6MF10130CF560AA0 + BC0-551 / 6MF10130AF510AA0 CM-2860 patch plug standard V28,ET,TRCA2-860 / 6MF12110CJ600AA0 MasterTM 1703 ACP CP-6014 master control elementGC6-014 / 6MF11130GA140AA0 UMPMA0103MA0 SM-2551XXBC2-551 / 6MF10130CF510AA0 SM-2556+ SM-0551 X X BC2-556 / 6MF10130CF560AA0 + BC0-551 / 6MF10130AF510AA0 CM-2860 patch plug standard V28,ET,TRCA2-860 / 6MF12110CJ600AA0 RING CablePatch cable CAT5 (4x2) AWG26/7T41-255 (1m) / 6MF13040BC550AA0 T41-251 (2m) / 6MF13040BC510AA0 T41-252 (3m) / 6MF13040BC520AA0 Fieldbus interfacesCM-0821 Fieldbus interface ring (3xFO, 1xel.)GA0-821 / 6MF11110AJ210AA0 Cable length:FO-INDOORCABLE-62-DUP-LSOH FO-OUTDOORCABLE-62-2FIB-ARM FO-CONNECTOR-ST-50/62 TF7-006 TF7-007 TF7-016 SlaveAK 1703 ACP CP-2010 systemfunction, processing and communication CM-2837 connect comm./sys-I/O (CP-2010) BC2-010 / 6MF10130CA100AA0 BC2-837 / 6MF10130CJ370AA0 CP-2017 processing and communication CM-2838 connection communication (CP-2017) BC2-017 / 6MF10130CA170AA0 BC2-838 / 6MF10130CJ380AA0 UMPSA0103SA0 SM-2551XXBC2-551 / 6MF10130CF510AA0 CM-2860 Patch Plug standard V28,ET,TRCA2-860 / 6MF12110CJ600AA0 SlaveTM 1703 ACP CP-6014 master control elementGC6-014 / 6MF11130GA140AA0 UMPSA0103SA0 SM-2551XXBC2-551 / 6MF10130CF510AA0 CM-2860 patch plug standard V28,ET,TRCA2-860 / 6MF12110CJ600AA0 SlaveBC 1703 ACP CP-5014 central processingBC5-014 / 6MF10130FA140AA0 UMPSA0103SA0 SM-2551XXBC2-551 / 6MF10130CF510AA0 CM-5860 Patch Modulestandard V28,ETCC5-860 / 6MF12130FJ600AA0 SlaveAK 1703 CP-2000 systemfunction CM-2857 connection comm./sys-I/O (CP-2000) BA2-000 / 6MF10110CA000AA0 BA2-857 / 6MF10110CJ570AA0 CP-2002 systemfunction, processing and communication CM-2858 connection communication (CP-2002) BA2-002 / 6MF10110CA020AA0 BA2-858 / 6MF10110CJ580AA0 UMPSA0103SA0 SM-2551XXBC2-551 / 6MF10130CF510AA0 CM-2860 patch plug standard V28,ET,TRCA2-860 / 6MF12110CJ600AA0 Configuration of Automation Networks ACP 1703 Platforms, Configuration AU + Networks39 DC0-021-2.02, Edition 07.2011 DesignationItem Number / MLFB STAR CablePatch cable CAT5 (4x2) AWG26/7T41-255 (1m) / 6MF13040BC550AA0T41-251 (2m) / 6MF13040BC510AA0T41-252 (3m) / 6MF13040BC520AA0 Fieldbus interfacesCM-0822 fieldbus interface star (4xFO)GA0-822 / 6MF11110AJ220AA0 Cable length:FO-INDOORCABLE-50-DUP-LSOH FO-OUTDOORCABLE-50-2FIB-ARM FO-CONNECTOR-ST-50/62 TF7-027 TF7-028 TF7-016 length: FO-INDOORCABLE-62-DUP-LSOH FO-OUTDOORCABLE-62-2FIB-ARM FO-CONNECTOR-ST-50/62 TF7-006 TF7-007 TF7-016 Fieldbus interfacesCM-0822 fieldbus interface star (4xFO)GA0-822 / 6MF11110AJ220AA0 SlaveAK 1703 ACP CP-2010 systemfunction, processing and communication CM-2837 connect comm./sys-I/O (CP-2010) BC2-010 / 6MF10130CA100AA0 BC2-837 / 6MF10130CJ370AA0 CP-2017 processing and communication CM-2838 connection communication (CP-2017) BC2-017 / 6MF10130CA170AA0 BC2-838 / 6MF10130CJ380AA0 UMPSA0103SA0 SM-2551XXBC2-551 / 6MF10130CF510AA0 CM-2872 patch plug V28/opt. CM-0821/27 CM-0827 fibre optical interface (electrical-FO) CA2-872 / 6MF12110CJ720AA0 GA0-827 / 6MF11110AJ270AA0 SlaveTM 1703 ACP CP-6014 master control elementGC6-014 / 6MF11130GA140AA0 UMPSA0103SA0 SM-2551XXBC2-551 / 6MF10130CF510AA0 CM-2872 patch plug V28/opt. CM-0821/27 CM-0827 fibre optical interface (electrical-FO) CA2-872 / 6MF12110CJ720AA0 GA0-827 / 6MF11110AJ270AA0 Slave TM 1703 emic acc. toIEC 60870-5-101 CP-6010 emicMaster Control Module UMPST0 CM-0827 fibre optical interface (electrical-FO) Modular coupling RJ-45 9-pol. D-SUB female GC6-010 / 6MF11130GA100AA0 GA0-827 / 6MF11110AJ270AA0 TF5-101 / 6MF13140FB010AA0 SlaveTM 1703 mic acc. toIEC 60870-5-101 CP-6020 mic Master Control M V.28/8 Mod CM-0827 fibre optical interface (electrical-FO) Modular coupling RJ-45 9-pol. D-SUB female GC6-020 / 6MF11130GA200AA0 GA0-827 / 6MF11110AJ270AA0 TF5-101 / 6MF13140FB010AA0 SlaveBC 1703 ACP CP-5014 central processingBC5-014 / 6MF10130FA140AA0 acc. toIEC 60870-5-101 SM-2551/UMPSA0BC2-551 / 6MF10130CF510AA0 CM-5862 patch plug SM-2541 and CM-0821/27 CM-0827 fibre optical interface (electrical-FO) CC5-862 / 6MF12130FJ620AA0 GA0-827 / 6MF11110AJ270AA0 SlaveBC 1703 ACP acc. toIEC 60870-5-103 local interface CP-5014 central processing 103SX5 CPCX55 master data for 103SX5 local optical interface on CM-5014 available BC5-014 / 6MF10130FA140AA0 SC5-598 CablePatch cable CAT5 (4x2) AWG26/7T41-255 (1m) / 6MF13040BC550AA0T41-251 (2m) / 6MF13040BC510AA0T41-252 (3m) / 6MF13040BC520AA0 Fieldbus interfacesCM-0821 fieldbus interface ring (3xFO, 1xel.)GA0-821 / 6MF11110AJ210AA0 SlaveAK 1703 CP-2000 systemfunction CM-2857 connection comm./sys-I/O (CP-2000) BA2-000 / 6MF10110CA000AA0 BA2-857 / 6MF10110CJ570AA0 CP-2002 systemfunction, processing and communication CM-2858 connection communication (CP-2002) BA2-002 / 6MF10110CA020AA0 BA2-858 / 6MF10110CJ580AA0 UMPSA0103SA0 SM-2551XXBC2-551 / 6MF10130CF510AA0 CM-2860 patch plug standard V28,ET,TRCA2-860 / 6MF12110CJ600AA0 Configuration of Automation Networks 40ACP 1703 Platforms, Configuration AU + Networks Edition 07.2011, DC0-021-2.02 2.1.7Multi-point Traffic, IEC 60870-5-101 or 103, optical, Tree FieldbusinterfacsPS-663x, CM-0821, CM-0822Settings on theconfigurataion switchesCM-0821 Master-Module ASettings on theconfigurataion switchCM-0822 Slave-Module CSlavesFieldbusinterfacesPS-663x, CM-0822 Settings on theconfigurataion switchCM-0822 Master-Module BFieldbusinterfacesPS-663x, CM-0822Cable 1Patchcable, length max. 3 mCable 2FO, length:0,5km using 50/125m fibre1,5km using 62,5/125m fibreCable 2FO, length:0,5km using 50/125m fibre1,5km using 62,5/125m fibreCable 2FO, length:0,5km using 50/125m fibre1,5km using 62,5/125m fibreMasterAK 1703 ACP (redundancy possible) or TM 1703 ACPCM-0827TM 1703 ACPTM 1703 micAK 1703 ACPCM-082721222 22 2 2CM-0827BC 1703 ACPESD EA RTH FACILITYPS-5620AK 1703IEC 60870-5-104ESD EAR TH FA CILITYRY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER$P S-5620$lM 1703 ACPCP6014X1X11 X4X12X14X16 X15X13WDER X5 X3X6X7X8X9X10SIM0/PK /LK/LK /PK RXERxTXSI3 SI2 SI1 SI0 LOCFBM-PRE/2M-PRE/3M-PRE/0M-PRE/1NCTBPWR24-60VDCPUSH TO UNLOCKERCOMCPYRYRESSI0SI2 (FB)SI1 (ETO)SI3RELEASE PUSHTORELEASEPUSHTOX212 345 6ESD EA RTH FA CILITYRY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER$PS-5620$lM 1703 ACPCP6014X1X11 X4X12X14X16 X15X13WDER X5 X3X6X7X8X9X10SIM0/PK /LK/LK /PK RXERxTXSI3 SI2 SI1 SI0 LOCFBM-PRE/2M-PRE/3M-PRE/0M-PRE/1NCTBPWR24-60VDCPUSH TO UNLOCKERCOMCPYRYRESSI0SI2 (FB)SI1 (ETO)SI3RELEASE PUSHTORELEASEPUSHTOX212 345 6T 8T ESTPEMOT E9 18 17 1 15 14 13 12 1 1 10 198754321 lA L k kY$F2 F1+|- 0 ,9 8 76 5 43 2 1QESCCTPLFFONFFON8764321 5OFF8764321 5OFFTM 1703 emic2 Configuration of Automation Networks ACP 1703 Platforms, Configuration AU + Networks41 DC0-021-2.02, Edition 07.2011 Power supply of the fieldbus interfaces PS-663x (redundant power supply is supported, but not to increase power) via the electrical interface direct from the master, if only one fieldbus interface (CM-0821) is used With one PS-663x max. 6fieldbus interfaces CM-0821 and/orCM-0822 can be supplied. On the CM-0827 (from version GA0-827-A on) line-idle state can be selected by a configuration switch Configuration switch CM-0827 line-idle state light on line-idle state light off Multi-point traffic according toIEC 60870-5-103 is not possible with TM 1703 emic, TM 1703 mic. Redundant automation units (masters) are only possible in AK 1703 ACP. A redundancy board rack CM-2816 (SCA-RS) is necessary. Details you can find in the chapterRedundant Automation Units. CM-0821 master-module A Configuration switch S1 1.... Rate 0 .......... OFF... ) 2.... Rate 1 .......... ON .... )...... e.g. baudrate 19 200 3.... Rate 2 .......... OFF... ) 4.... Rate 3 .......... ON .... ) 5.... Star/ring ....... OFF... star 6.... Level-CH3.... OFF... line-idle state...... light off 7.... Level-CH2.... OFF... line-idle state...... light off 8.... Level-CH1.... OFF... line-idle state...... light off Configuration switch S2 L....................... ON ..... ) master (single) R ...................... ON ..... ) master (single) 10/11 ................ ON ..... 11 Bit word length CM-0822 master-module B 1.... Rate 0 .......... ON .... ) 2.... Rate 1 .......... OFF... )...... e.g. baudrate 19 200 3.... Rate 2 .......... ON .... ) 4.... Master/slave. OFF... master 5.... Level-CH4.... OFF... line-idle state...... light off 6.... Level-CH3.... OFF... line-idle state...... light off 7.... Level-CH2.... OFF... line-idle state...... light off 8.... Level-CH1.... OFF... line-idle state...... light off CM-0822 slave-module C 1.... Rate 0 .......... ON .... ) 2.... Rate 1 .......... OFF... )...... e.g. baudrate 19 200 3.... Rate 2 .......... ON .... ) 4.... Master/slave. ON .... slave 5.... Level-CH4.... OFF... line-idle state...... light off 6.... Level-CH3.... OFF... line-idle state...... light off 7.... Level-CH2.... OFF... line-idle state...... light off 8.... Level-CH1.... OFF... line-idle state...... light off Configuration of Automation Networks 42ACP 1703 Platforms, Configuration AU + Networks Edition 07.2011, DC0-021-2.02 Necessary modules and cables DesignationItem Number / MLFB Master AK 1703 ACP electrical CP-2010 systemfunction, processing and communication CM-2837 connect comm./sys-I/O (CP-2010) BC2-010 / 6MF10130CA100AA0 BC2-837 / 6MF10130CJ370AA0 CP-2017 processing and communication CM-2838 connection communication (CP-2017) BC2-017 / 6MF10130CA170AA0 BC2-838 / 6MF10130CJ380AA0 UMPMA0103MA0 SM-2551XXBC2-551 / 6MF10130CF510AA0 SM-2556+ SM-0551 X X BC2-556 / 6MF10130CF560AA0 + BC0-551 / 6MF10130AF510AA0 CM-2860 patch plug standard V28,ET,TRCA2-860 / 6MF12110CJ600AA0 Master AK 1703 ACP redundant optical CP-2010 systemfunction, processing and communication CM-2837 connect comm./sys-I/O (CP-2010) BC2-010 / 6MF10130CA100AA0 BC2-837 / 6MF10130CJ370AA0 CP-2017 processing and communication CM-2838 connection communication (CP-2017) BC2-017 / 6MF10130CA170AA0 BC2-838 / 6MF10130CJ380AA0 UMPMA0103MA0 SM-2551XXBC2-551 / 6MF10130CF510AA0 SM-2556+ SM-0551 X X BC2-556 / 6MF10130CF560AA0 + BC0-551 / 6MF10130AF510AA0 CM-2872 patch plug V28/opt. CM-0821/27 CM-0827 fibre optical interface (electrical-FO) CA2-872 / 6MF12110CJ720AA0 GA0-827 / 6MF11110AJ270AA0 MasterTM 1703 ACP CP-6014master control elementGC6-014 / 6MF11130GA140AA0 UMPMA0103MA0 SM-2551XXBC2-551 / 6MF10130CF510AA0 SM-2556+ SM-0551 X X BC2-556 / 6MF10130CF560AA0 + BC0-551 / 6MF10130AF510AA0 CM-2860 patch plug standard V28,ET,TRCA2-860 / 6MF12110CJ600AA0 CablePatch cable CAT5 (4x2) AWG26/7T41-255 (1m) / 6MF13040BC550AA0 T41-251 (2m) / 6MF13040BC510AA0 T41-252 (3m) / 6MF13040BC520AA0 Cable length:FO-INDOORCABLE-50-DUP-LSOH FO-OUTDOORCABLE-50-2FIB-ARM FO-CONNECTOR-ST-50/62 TF7-027 TF7-028 TF7-016 length: FO-INDOORCABLE-62-DUP-LSOH FO-OUTDOORCABLE-62-2FIB-ARM FO-CONNECTOR-ST-50/62 TF7-006 TF7-007 TF7-016 Fieldbus interfacesCM-0821 fieldbus interface ring (3xFO, 1xel.)GA0-821 / 6MF11110AJ210AA0 CM-0822 fieldbus interface star (4xFO)GA0-822 / 6MF11110AJ220AA0 Configuration of Automation Networks ACP 1703 Platforms, Configuration AU + Networks43 DC0-021-2.02, Edition 07.2011 DesignationItem Number / MLFB SlaveAK 1703 ACP CP-2010 systemfunction, processing and communication CM-2837 connect comm./sys-I/O (CP-2010) BC2-010 / 6MF10130CA100AA0 BC2-837 / 6MF10130CJ370AA0 CP-2017 processing and communication CM-2838 connection communication (CP-2017) BC2-017 / 6MF10130CA170AA0 BC2-838 / 6MF10130CJ380AA0 UMPSA0103SA0 SM-2551XXBC2-551 / 6MF10130CF510AA0 CM-2872 patch plug V28/opt. CM-0821/27 CM-0827 fibre optical interface (electrical-FO) CA2-872 / 6MF12110CJ720AA0 GA0-827 / 6MF11110AJ270AA0 SlaveTM 1703 ACP CP-6014 master control elementGC6-014 / 6MF11130GA140AA0 UMPSA0103SA0 SM-2551XXBC2-551 / 6MF10130CF510AA0 CM-2872 patch plug V28/opt. CM-0821/27 CM-0827 fibre optical interface (electrical-FO) CA2-872 / 6MF12110CJ720AA0 GA0-827 / 6MF11110AJ270AA1 Slave TM 1703 emic acc. toIEC 60870-5-101 CP-6010 emicMaster Control Module UMPST0 CM-0827 fibre optical interface (electrical-FO) Modular coupling RJ-45 9-pol. D-SUB female GC6-010 / 6MF11130GA100AA0 GA0-827 / 6MF11110AJ270AA0 TF5-101 / 6MF13140FB010AA0 SlaveTM 1703 mic acc. toIEC 60870-5-101 CP-6020 mic Master Control M V.28/8 Mod CM-0827 fibre optical interface (electrical-FO) Modular coupling RJ-45 9-pol. D-SUB female GC6-020 / 6MF11130GA200AA0 GA0-827 / 6MF11110AJ270AA0 TF5-101 / 6MF13140FB010AA0 SlaveBC 1703 ACP CP-5014 central processingBC5-014 / 6MF10130FA140AA0 acc. toIEC 60870-5-101 SM-2551/UMPSA0BC2-551 / 6MF10130CF510AA0 CM-5862 patch plug SM-2541 and CM-0821/27 CM-0827 Fibre optical interface (electrical-FO) CC5-862 / 6MF12130FJ620AA0 GA0-827 / 6MF11110AJ270AA0 SlaveBC 1703 ACP acc. toIEC 60870-5-103 local interface CP-5014 central processing 103SX5 CPCX55 master data for 103SX5 local optical interface on CM-5014 available BC5-014 / 6MF10130FA140AA0 SC5-598 Slave AK 1703 CP-2000 systemfunction CM-2857 connection comm./sys-I/O (CP-2000) BA2-000 BA2-857 / 6MF10110CJ570AA0 CP-2002 systemfunction, processing and communication CM-2858 connection communication (CP-2002) BA2-002 / 6MF10110CA020AA0 BA2-858 / 6MF10110CJ580AA0 UMPSA0103SA0 SM-2551XXBC2-551 / 6MF10130CF510AA0 CM-2872 patch plug V28/opt. CM-0821/27 CM-0827 fibre optical interface (electrical-FO) CA2-872 / 6MF12110CJ720AA0 GA0-827 / 6MF11110AJ270AA0 Configuration of Automation Networks 44ACP 1703 Platforms, Configuration AU + Networks Edition 07.2011, DC0-021-2.02 2.1.8Multi-point Traffic, IEC 60870-5-103, optical, 2 Slaves MasterBC 1703 ACPProtective devicesFieldbus interfaceCM-0821Cable 2FO, length:0.5km using 50/125m fibre1.5km using 62,5/125m fibreCable 1Patchcable, length max. 3 mSettings on theconfigurataion switchesCM-0821 Master-Module AIEC 60870-5-1041DRS LIGHT22DRS LIGHTT8TLST!LM0TL9 18 17 16 15 14 13 12 11 10 1987654321 PA LP PY$F2 F1+| O ,9 8 76 5 +3 2 10LSCCT!!FFONFFON Main application of this configuration: Coupling of (non-SIEMENS) protective devices in the bay level Supply of the fieldbus interface: via the electrical interface direct from the master if only one fieldbus interface (CM-0821) is used. CM-0821 master-module A Configuration switch S1 1 .... Rate 0........... OFF... ) 2 .... Rate 1........... ON..... )...... e.g. baudrate 19 200 3 .... Rate 2........... OFF... ) 4 .... Rate 3........... ON..... ) 5 .... Star/ring........ OFF... star 6 .... Level-CH3 .... OFF... line-idle state...... light off 7 .... Level-CH2 .... OFF... line-idle state...... light off 8 .... Level-CH1 .... OFF... line-idle state...... light off Configuration switch S2 L ....................... ON......) master (single) R....................... ON......) master (single) 10/11................. ON......11 Bit word length Configuration of Automation Networks ACP 1703 Platforms, Configuration AU + Networks45 DC0-021-2.02, Edition 07.2011 Necessary modules and cables DesignationItem Number / MLFB MasterBC 1703 ACP CP-5014 central processingBC5-014 / 6MF10130FA140AA0 with SM-2546 ETA2103MA0 SM-2546 + SM-0551 X X BC2-546 / 6MF10130CF460AA0 + BC0-551 / 6MF10130AF510AA0 CM-5861 patch plug standard ET 100 FXCC5-861 / 6MF12130FJ610AA0 with SM-2556 ETA2103MA0 SM-2556 + SM-0551 X X BC2-556 / 6MF10130CF560AA0 + BC0-551 / 6MF10130AF510AA0 CM-5860 patch plug standard V28,ETCC5-860 / 6MF12130FJ600AA0 CablePatch cable CAT5 (4x2) AWG26/7T41-255 (1m) / 6MF13040BC550AA0T41-251 (2m) / 6MF13040BC510AA0T41-252 (3m) / 6MF13040BC520AA0 Fieldbus interfaceCM-0821 fieldbus interface ring (3xFO, 1xel.)GA0-821 / 6MF11110AJ210AA0 Cable length:FO-INDOORCABLE-50-DUP-LSOH FO-OUTDOORCABLE-50-2FIB-ARM FO-CONNECTOR-ST-50/62 TF7-027 TF7-028 TF7-016 length: FO-INDOORCABLE-62-DUP-LSOH FO-OUTDOORCABLE-62-2FIB-ARMFO-CONNECTOR-ST-50/62 TF7-006 TF7-007 TF7-016 Configuration of Automation Networks 46ACP 1703 Platforms, Configuration AU + Networks Edition 07.2011, DC0-021-2.02 2.1.9Methods for Coupling of (non-SIEMENS) Protective Devices in Ring Configurations Cable 1Patchcable, length max. 3 mCable 2FO, length:1.3km using 62,5/125m fibreCable 4 length max. 500 m or50 m if RS485 interface of slave issuppliedRS485 interface: screened cable necessaryCable 3FO, length:0.5km using 50/125m fibre1.5km using 62,5/125m fibreCable 5information ring monitoringCM-0823Slave Module CCM-0823Slave Module CCM-0821Slave Module BCM-0821Slave Module BCM-0821Slave Module BCM-0823Slave Module CCM-0823Slave Module CCM-0823Slave Module CCM-0823Slave Module CCM-0822Slave Module DCM-0822Slave Module DCM-0821Master Module AMasterAK 1703 ACP, TM 1703 ACP, BC 1703 ACPESD EARTH FACI LITYRY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER RY ER$PS-56 201IEC 60870-5-1041123456789DRS LIGHTDRS LIGHT DRSLIGHT DRSLIGHTDRS LIGHTDRSLIGHT DRS LIGHT DRS LIGHTDRS LIGHT DRSLIGHT DRSLIGHTDRSLIGHT DRS LIGHT DRS LIGHTDRS LIGHTDRS LIGHTDRS LIGHT DRSLIGHT DRSLIGHT2345444433 33333 3 3355555222222222CM-0829111TTESTREMOTE9 18 17 16 1b 14 1 12 11 10 19876b421 l^ tk k+$F 2 F1+|0 ,9 8 76 5 43 2 1QESCC TRLTTESTRE MOTE9 18 17 16 1b 14 1 12 11 10 19876b 421 l^ tk k+$F2 F1+| 0 ,9 8 76 5 43 2 1QESCCTRLTTESTREMOTE9 18 17 16 1b 14 1 12 11 10 19876b421 l^ tk k+$F2 F1+ | 0 ,9 8 76 5 43 2 1QESCC TRLTTESTREMOTE9 18 17 16 1b 14 1 12 11 10 19876b421 l^ tk k+$F 2 F1+ | 0 ,9 8 76 5 43 2 1QESCC TR LTTESTREMOTE9 18 17 16 1b 14 1 12 11 10 19876b421 l^ tk k+$F2 F1+|0 ,9 8 76 5 43 2 1QESCC TRL$TM 1703 ACPCP6014X1X11 X4X12X14X16 X15X13WDER X5 X3X6X7X8X9X10SIM0/PK /LK/LK /PK RXERxTXSI3 SI2 SI1 SI0 LOCFBM-PRE/2M-PRE/3M-PRE/0M-PRE/1NCTBPWR24-60VDCPUSH TO UNLOCKERCOMCPYRYRESSI0SI2 (FB)SI1 (ETO)SI3RELEASE PUSHTORELEASE PUSHTOX212 3 45 6 Configuration of Automation Networks ACP 1703 Platforms, Configuration AU + Networks47 DC0-021-2.02, Edition 07.2011 By performance reasons recommended number of protective devices in the ring on one 103-master interface: 20 protective devices transmission only in signalling direction 10 15 protective devices transmission in control direction and signalling direction CM-0821 master-module A Configuration switch S1 1.....Rate 0...........OFF ...) 2.....Rate 1...........ON.....).......e.g. baudrate 19 200 3.....Rate 2...........OFF ...) 4.....Rate 3...........ON.....) 5.....Star/ring........ON.....ring 6.....Level-CH3.....OFF ...line-idle state.......light off 7.....Level-CH2.....ON.....line-idle state.......light on 8.....Level-CH1.....ON.....line-idle state.......light on Configuration switch S2 L....................... ON ..... ) master (single) R ...................... ON ..... ) master (single) 10/11................ ON ..... 11 Bit word length CM-0821 slave-module B Configuration switch S1 1.....Rate 0...........OFF ...) 2.....Rate 1...........ON.....).......e.g. baudrate 19 200 3.....Rate 2...........OFF ...) 4.....Rate 3...........ON.....) 5.....Star/ring........ON.....ring 6.....Level-CH3.....OFF ...line-idle state.......light off 7.....Level-CH2.....ON.....line-idle state.......light on 8.....Level-CH1.....ON.....line-idle state.......light on Configuration switch S2 L....................... OFF.... ) slave R ...................... OFF.... ) slave 10/11................ ON ..... 11 Bit word length CM-0823 slave-module C Configuration switch S1 1.... Rate 0 .......... OFF... ) 2.... Rate 1 .......... ON .... )...... e.g. baudrate 19 200 3.... Rate 2 .......... OFF... ) 4.... Rate 3 .......... ON .... ) 5.... star/ring........ ON .... ring 6.... Level-CH3.... OFF... line-idle state...... light off 7.... Level-CH2.... ON .... line-idle state...... light on 8.... Level-CH1.... ON .... line-idle state...... light on Configuration switch S2 L.................... OFF....... ) slave R ................... OFF....... ) slave 10/11 ............... ON....... 11 Bit word lengthBT............ ON/OFF....... with/without bus ............................. ....... termination The description of the configuration switches on the CM-0823 you can find in the data sheet CM-0823. CM-0822 slave-module D 1.... Rate 0 .......... ON .... ) 2.... Rate 1 .......... OFF... )...... e.g. baudrate 19 200 3.... Rate 2 .......... ON .... ) 4.... Master/slave. ON .... slave 5.... Level-CH4.... OFF... line-idle state...... light off 6.... Level-CH3.... OFF... line-idle state...... light off 7.... Level-CH2.... OFF... line-idle state...... light off 8.... Level-CH1.... OFF... line-idle state...... light off Configuration of Automation Networks 48ACP 1703 Platforms, Configuration AU + Networks Edition 07.2011, DC0-021-2.02 Method Cable

Cable

Cable

Cable

Cable

CM-0821 CM-0822 CM-0823 CM-0829 PS-66xx 11 protective device (PD) electrical XXX 21 PD electrical, 1 PD opticalXXXX 31 PD electrical, n PD RS485XXXXX 41 PD RS 485XXXXX 5n PD RS485XXXXX 61 PD opticalXXXXX 7n PD opticalXXXXXX 81 PD optical, n PD RS485XXXXXX 91 PD RS485, n PD opticalXXXXXXX Configuration of Automation Networks ACP 1703 Platforms, Configuration AU + Networks49 DC0-021-2.02, Edition 07.2011 Necessary modules and cables DesignationItem Number / MLFB MASTER BC 1703 ACPCP-5014 central processingBC5-000 / 6MF10130FA140AA0 with SM-2546 SM-2546 + SM-0551/103MA0 BC2-546 / 6MF10130CF460AA0 + BC0-551 / 6MF10130AF510AA0 CM-5861 patch plug standard ET 100 FXCC5-861 / 6MF12130FJ610AA0 with SM-2556 SM-2556 + SM-0551/103MA0 BC2-556 / 6MF10130CF560AA0 + BC0-551 / 6MF10130AF510AA0 CM-5860 patch plug standard V28,ETCC5-860 / 6MF12130FJ600AA0 AK 1703 ACPCP-2010 systemfunction, processing and communication CM-2837 connect comm./sys-I/O (CP-2010) BC2-010 / 6MF10130CA100AA0 BC2-837 / 6MF10130CJ370AA0 CP-2017 processing and communication CM-2838 connection communication (CP-2017) BC2-017 / 6MF10130CA170AA0 BC2-838 / 6MF10130CJ380AA0 SM-2551/103MA0BC2-551 / 6MF10130CF510AA0 SM-2556 + SM-0551/103MA0 BC2-556 / 6MF10130CF560AA0 + BC0-551 / 6MF10130AF510AA0 CM-2860 patch plug standard V28,ET,TRCA2-860 / 6MF12110CJ600AA0 TM 1703 ACPCP-6014 master control elementGC6-014 / 6MF11130GA140AA0 SM-2551/103MA0BC2-551 / 6MF10130CF510AA0 SM-2556 + SM-0551/103MA0 BC2-556 / 6MF10130CF560AA0 + BC0-551 / 6MF10130AF510AA0 CM-2860 patch plug standard V28,ET,TRCA2-860 / 6MF12110CJ600AA0 PROTECTIVE DEVICES BC 1703 ACP optical acc. to IEC 60870-5-103 local interface CP-5014 central processing 103SX5 CPCX55 master data for 103SX50 local optical interface on CP-5014 available BC5-014 / 6MF10130FA140AA0 SC5-598 BC 1703 ACP electrical CP-5014 central processingBC5-014 / 6MF10130FA140AA0 SM-2551/103SA0BC2-551 / 6MF10130CF510AA0 CM-5860 patch plug standard V28,ETCC5-860 / 6MF12130FJ600AA0 CablePatch cable CAT5 (4x2) AWG26/7T41-255 (1m) / 6MF13040BC550AA0T41-251 (2m) / 6MF13040BC510AA0T41-252 (3m) / 6MF13040BC520AA0 Cable length:FO-INDOORCABLE-62-DUP-LSOH FO-OUTDOORCABLE-62-2FIB-ARMFO-CONNECTOR-ST-50/62 TF7-006 TF7-007 TF7-016 Cable length:FO-INDOORCABLE-50-DUP-LSOH FO-OUTDOORCABLE-50-2FIB-ARM FO-CONNECTOR-ST-50/62 TF7-027 TF7-028 TF7-016 length:FO-INDOORCABLE-62-DUP-LSOH FO-OUTDOORCABLE-62-2FIB-ARMFO-CONNECTOR-ST-50/62 TF7-006 TF7-007 TF7-016 Cable length:RS485 interface: screened cable necessary CableInformation ring monitoring Fieldbus interfaces CM-0821 fieldbus interface ring (3xFO, 1xel.)GA0-821 / 6MF11110AJ210AA0 CM-0822 fieldbus interface star (4xFO)GA0-822 / 6MF11110AJ220AA0 CM-0823 fieldbus interface ring(3xFO, 1xRS485)GA0-823 / 6MF11110AJ230AA0 CM-0829 RS232/RS422; RS485 converterGA0-829 / 6MF11112AJ200AA0 Configuration of Automation Networks 50ACP 1703 Platforms, Configuration AU + Networks Edition 07.2011, DC0-021-2.02 2.1.10Dial-up Traffic analog/GSM, IEC 60870-5-101 Master AK 1703 ACPor TM 1703 ACPCableModem - MasterModem - SlaveSlavesCableTM 1703 ACPAK 1703 ACPTM 1703 micModem ModemModem Mo