aero 20a v1 - d7rh5s3nxmpy4.cloudfront.net€¦ · the aero 20a is a compact line array system...

2
» Bi-amplified 2-way system » 1200 W Class D power amplifier » Powerful DSP with Brickwall FIR Filters » Remote monitoring and control via DASnet™ » New SERPIS BPS-1912 high frequency plane wave generator 647 443 316 The Aero 20A is a compact line array system which incorporates D.A.S.´s latest technical achievements in transducer design, power electronics and system management. The low-mid range incorporates a new D.A.S. 12AN4 loudspeaker optimized to provide high output and reliability. High frequency response relies on a compression driver-waveguide assembly developed for the Aero 20A. The M-75N compression driver employs a powerful neodymium magnet structure, a titanium diaphragm and 75 mm (3”) voice coil. The M-75N is attached to a new aluminum waveguide that has been designed to be free of resonances and provide a natural sound. The Aero 20A incorporates the latest in digital signal processors. Brick wall FIR filters provide perfect alignment between ways achieving exceptionally uniform coverage all the way down to the crossover point. Top-of-the-line AD/DA converters have been employed allowing for significant improvements in dynamics, lower distortion and ultra-low noise levels. Remote monitoring and control is provided by way of DASnet™. A new captive rigging mechanism enhances ease-of-use by allowing angle selection to be made while stacked on the transport dolly. 1600 W peak - 800 W continuous 800 W peak - 400 W continuous Balanced Differential Line Line: 20 kohms Line: 4.9 V (+16 dBu) 60 Hz - 20 kHz 136 dB 90º Horizontal - Splay Dependent Vertical Birch Plywood Black/ISO-Flex Paint LF: 1 x 12AN4/GM 12AN4 HF: 1 x M-75N/GM M-75N Audio INPUT: Female XLR Audio LOOP THRU: Male XLR Audio + Data INPUT: etherCON Audio + Data LOOP THRU: etherCON AC INPUT: powerCON TRUE 1 AC OUTPUT: powerCON TRUE 1 3.6 A, 115 V, 50 Hz/60 Hz 1.8 A, 230 V, 50 Hz/60 Hz 31.7 x 64.7 x 44.3 cm; 12.4 x 25.2 x 17.3 in 33.1 kg (72.82 lb) AX-aero20 / AXS-aero20 / Pick-Up AX-aero20 / PL-20S / Fun-4aero20 / AX-combo2040 Low-mid Frequency Power Amplifier High Frequency Power Amplifier Input Type Input Impedance Sensitivity On-axis Frequency Range (-10 dB) Maximum Peak SPL at 1 meter Nominal -6 dB Beamwidths Enclosure Material Finish Transducers/Replacement Parts Connectors AC Power Requirements Dimensions (H x W x D) Weight Accessories (optional) Technical Specifications Dimensions Powered, bi-amplified compact line array module aero series 2 aero 20A

Upload: others

Post on 17-Aug-2021

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Aero 20A v1 - d7rh5s3nxmpy4.cloudfront.net€¦ · The Aero 20A is a compact line array system which incorporates D.A.S.´s latest technical achievements in transducer design, power

» Bi-amplified 2-way system

» 1200 W Class D poweramplifier

» Powerful DSP withBrickwall FIR Filters

» Remote monitoring andcontrol via DASnet™

» New SERPIS BPS-1912high frequency plane wavegenerator

647

443

316

The Aero 20A is a compact line array system whichincorporates D.A.S.´s latest technical achievements intransducer design, power electronics and systemmanagement.

The low-mid range incorporates a new D.A.S. 12AN4loudspeaker optimized to provide high output andreliability. High frequency response relies on acompression driver-waveguide assembly developed forthe Aero 20A. The M-75N compression driver employs apowerful neodymium magnet structure, a titaniumdiaphragm and 75 mm (3”) voice coil. The M-75N isattached to a new aluminum waveguide that has beendesigned to be free of resonances and provide a naturalsound.

The Aero 20A incorporates the latest in digital signalprocessors. Brick wall FIR filters provide perfectalignment between ways achieving exceptionally uniformcoverage all the way down to the crossover point.

Top-of-the-line AD/DA converters have been employedallowing for significant improvements in dynamics, lowerdistortion and ultra-low noise levels. Remote monitoringand control is provided by way of DASnet™.

A new captive rigging mechanism enhances ease-of-useby allowing angle selection to be made while stacked onthe transport dolly.

1600 Wpeak - 800 Wcontinuous800 Wpeak - 400 WcontinuousBalanced Differential Line

Line: 20 kohms

Line: 4.9 V (+16 dBu)

60 Hz - 20 kHz

136 dB

90º Horizontal - Splay Dependent Vertical

Birch Plywood

Black/ISO-Flex Paint

LF: 1 x 12AN4/GM 12AN4

HF: 1 x M-75N/GM M-75N

Audio INPUT: Female XLR

Audio LOOP THRU: Male XLR

Audio + Data INPUT: etherCON

Audio + Data LOOP THRU: etherCON

AC INPUT: powerCON TRUE 1

AC OUTPUT: powerCON TRUE 1

3.6 A, 115 V, 50 Hz/60 Hz

1.8 A, 230 V, 50 Hz/60 Hz

31.7 x 64.7 x 44.3 cm; 12.4 x 25.2 x 17.3 in

33.1 kg (72.82 lb)

AX-aero20 / AXS-aero20 / Pick-Up AX-aero20

/ PL-20S / Fun-4aero20 / AX-combo2040

Low-mid Frequency Power Amplifier

High Frequency Power Amplifier

Input Type

Input Impedance

Sensitivity

On-axis Frequency Range (-10 dB)

Maximum Peak SPL at 1 meter

Nominal -6 dB Beamwidths

Enclosure Material

Finish

Transducers/Replacement Parts

Connectors

AC Power Requirements

Dimensions (H x W x D)

Weight

Accessories (optional)

Technical Specifications Dimensions

Powered, bi-amplified compact line array module

aeroseries2

aero 20A

Page 2: Aero 20A v1 - d7rh5s3nxmpy4.cloudfront.net€¦ · The Aero 20A is a compact line array system which incorporates D.A.S.´s latest technical achievements in transducer design, power

Frequency Response

Shows the frequencyresponse at 1 m of aunit radiating to ananechoic environmentand driven by a sweptsine wave signal (-20dBu input - 1 unit MTpreset).

10 100 1k 10k 20k10 Hz

120.0

dBSPL

110.0

100.0

90.0

80.0

70.0

125Hz

250Hz

500Hz

1000Hz

2000Hz

4000Hz

8000Hz

12500Hz

down up6

0

-6

-12

-18

-24

dB30°

60°

90°

120°

150°

180°

-150°

-120°

-90°

-60°

-30°

Ref 0 1/3 Octave

6

0

-6

-12

-18

-24

dB30°

60°

90°

120°

150°

180°

-150°

-120°

-90°

-60°

-30°

Ref 0 1/3 Octave

NOTES. 1.Frequency response: referred to 1 m; low end obtained through the use of near field techniques; one-third octave smoothed for correlation with human hearing. 5.Polars were acquired by placing the unit on a computer controlled turntable inside our anechoic chamber. Measurement distance was 4 m.

aero 20A aero series2

10 100 1k 10k 20k10 Hz

120.0 10

dBSPL %

110.0 8

100.0 6

90.0 4

80.0 2

70.0 0

-180

-120

-60

0

60

120

180

100 1 k 10 k 12k5 Hz

0

dB

-10

-20

-30

-50

-40

-180

-120

-60

0

60

120

180

100 1 k 10 k 12k5 Hz

0

dB

-10

-20

-30

-50

-40

Distortion

Shows the SecondHarmonic Distortion(grey) and ThirdHarmonic Distortion(dotted) curves for aunit driven by a sweptsine wave signal (-10dBu input).

Horizontal Directivity

Shows normalizedhorizontal isobar plot.

Vertical Directivity

Shows normalizedvertical isobar plot.

Polar Response

Shows the 1/3 octaveband horizontal (left)and vertical (right)polars for the indicatedfrequencies. Full scaleis 30 dB, 6 dB perdivision.

Product improvement through research and developmentis a continuous process at D.A.S. Audio. All specificationssubject to change without notice.

HT_Aero20A_00