aerosol jet production ready materials jet production ready materials the right material at the...
TRANSCRIPT
AEROSOL JET PRODUCTION READY MATERIALS
The Right Material at the Right Feature Size
Aerosol Jet systems have the unique ability to deposit a wide range of elec-tronic materials onto almost any substrate with very high definition. From conductors like nano-silver and nano-copper to silver-filled epoxies and UV curable adhesives/di-electric materials, Aerosol Jet enables customers to select the right material for their substrate and application. Currently being leveraged in high definition printing and dispense applications, Aerosol Jet is meeting the needs of next generation advanced packaging and component attach challenges.
®
FEATURE SIZE FLEXIBILITY WITH ALMOST ANY MATERIAL
Feature sizes ranging from < 20 μm to over 2.5 mm
Printed material thickness from 100 nanometers to 10’s of microns
HIGH PERFORMANCE, COMMERCIALLY AVAILABLE MATERIALSLow resistivity conductors, UV curable dielectrics,silver filled conductive epoxies, adhesives, and more...
Open source approach to material suppliers; Optomecand/or customer driven material solutions
ELIMINATING MATERIAL DISPENSING BOUNDARIESDispense smaller features, smaller volumes with greaterprecision and definition
Dispense a wider array of materials on as-is substrates
ENABLING NEXT GENERATION PACKAGING METHODSPrint high density interconnects for BGA and stacked die applications
Direct print EMI/RF shielding, molded antenna on single OR molded components
MOVE FROM 2D TO 2.5D TO 3D SEEMLESSLYDeposit materials on any substrate, regardless of form factor
Fully functionalized planar and non-planar curcuits
BGA Redistribution Circuit Printed 3D Interconnects
Shielded PCB/Components Printed Phone Antenna
Aerosol Jet Application Flexibility
Aerosol Jet and Optomec are trademarks of Optomec, Inc. LENS is a trademark of Sandia National Labs. 2/2018
Optomec Inc.
3911 Singer Blvd. NE
Albuquerque, NM 87109 USA
Tel: 505-761-8250
Fax: 505-761-6638
E-mail: [email protected]
Aerosol Jet Materials
DOWAANPPV NanoCellClariantIntrinsiqNovacentrixCreativ MaterialsResin DesignsHD Micro PI-2425Microchem SU8Sun ChemicalNorland NEA-121Loctite PR-406Graphene
INK
EXAMPLE: CLARIANT PRINTED SILVER LINES
Target feature size 50 μm
Less than 5% variation over 4 hour period
180C process temperature
< 3x Bulk Silver Resistivity
Materials from Industry leading sources. Optomec tested and qualified for production applications.
Optomec offers an array of “How To” material starter recipes targeted to meet various applications and in-dustrial manufacturing needs.
Partial listing of available materials. Consult Optomec for lastest listings
TYPE
Ag ConductorAg ConductorAg ConductorAg ConductorCu ConductorSilver-Filled EpoxySilver-Filled EpoxySilver-Filled EpoxyHi-Temp DielectricDielectricDielectricUV Cure AdhesiveCarbon ResistorCarbon Conductor
ABOUT OPTOMECOptomec® is a privately-held, rapidly growing supplier of Additive Manufacturing systems. Optomec’s patented Aerosol Jet Sys-tems for printed electronics and LENS 3D Printers for metal components are used by industry to reduce product cost and improve performance. Together, these unique printing solutions work with the broadest spectrum of functional materials, ranging from electronic inks to structural metals and even biological matter. Optomec has more than 300 marquee customers around the world, targeting production applications in the Electronics, Energy, Life Sciences and Aerospace industries. For more information about Optomec, visit http://www.optomec.com.
Aerosol Jet and Optomec are trademarks of Optomec, Inc. LENS is a trademark of Sandia National Labs. 2/2018
Optomec Inc.
3911 Singer Blvd. NE
Albuquerque, NM 87109 USA
Tel: 505-761-8250
Fax: 505-761-6638
E-mail: [email protected]