Agricultural SystemsAdvanced Drivetrain Solutions

With more than a century of knowledge

in the agricultural market, Dana offers proven

products and unmatched capabilities.

PRODUCTIVITY

EFFICIENCY

Dana serves as a global supplier of Spicer drivetrains designed for the unique demands of agricultural

vehicles. Each drivetrain component is tested and manufactured to meet customers’ specific needs.

Spicer® AxlesBuilt for agricultural vehicles with engine horsepower from 95 to 360, Spicer front drive axles are engineered with optional wet service brakes to enable high-speed transport.

Product offerings include:n Planetary axlesn Planetary suspended axles

Spicer® DriveshaftsSpicer driveshafts are durable enough to work reliably on uneven ground under heavy loading conditions. Ranging from 400 to 15,000,000 Nm, each Spicer driveshaft reflects more than a century of innovation. Dana continuously develops new designs, materials, and processes for our driveshafts to provide more power, greater efficiency, and better overall performance.

Product offerings include:n Spicer Life Series® driveshafts

n Spicer® Compact™ Series driveshafts

n Spicer® Wing® Series driveshafts

n Spicer® 10™ Series driveshafts

Spicer ® axles are engineered to deliver maximum performance along with low-cost service and maintenance.

Spicer® driveshafts help agricultural machines work faster to maximize productivity.

Drivetrain Systems for Agricultural Vehicles With a full line of Spicer® brand products designed specifically for agricultural vehicles,

customers can look to Dana for both innovation and design flexibility. Dana develops technologies

that increase crop yields, improve harvesting efficiency, and comply with evolving emissions

standards, while reducing overall operating costs and enhancing operator safety.

Spicer® Central Tire Inflation System (CTIS)Spicer CTIS provides the highest level of mobility by optimizing tire pressure to the working environment. When working either on- or off-road, it enables farmers to adjust tire pressure to match conditions. CTIS technology allows for an optimized tire pressure setting customized to terrain type, which lessens soil compaction and improves crop yield. Plus, the system reduces downtime associated with tire malfunctions. Our limp home feature keeps tires inflated in puncture situations so vehicles can return to the service area and avoid in-field repairs.

Spicer CTIS Benefits include:

Reduced fuel consumption

Safe, stable drive at optimum speed

Tire pressure adjustment from the cab while machine is moving

Greater tread deflection

Less tire wear

Rapid inflate/deflate capability for enhanced productivity

Longer tire life

Reduced ground pressure and footprint depth

With the rapid inflate/deflate

capability of Spicer ® CTIS,

farms can produce higher

crop yields while enhancing

productivity.

As farm tractors and field equipment

become larger and heavier, soil

compaction is becoming a more

significant consideration.

2

34

5

1

The Spicer CTIS System1 Spicer® Control Panel 4 Spicer® Wheel Valve

2 Spicer® Mechatronic Control Unit (MCU) 5 Spicer® Integrated Front Axle

3 Spicer® Integrated Rotary Pneumatic Seal

The ultimate in machine energy

efficiency

Spicer® PowerBoost® Hydraulic-Hybrid SystemThe Spicer® PowerBoost® hydraulic-hybrid system captures and stores otherwise wasted energy from braking and other functions to provide an additional source of hybrid power, supplementing the diesel engine. Advanced system controls ensure that the engine and hybrid system work in tandem to operate at optimum efficiency, while also providing additional power on demand for working tasks. With fuel savings of up to 40%, improved machine productivity, and reduced maintenance, the technology substantially reduces total cost of ownership (TCO).

1 Spicer® PowerBoost® Hub – Powering Vehicle Efficiency Through a Hub of Innovation

The Spicer® PowerBoost® Hub is an advanced mechatronic control unit (MCU) that intelligently manages energy from engine, braking or other sources to provide primary or supplementary hydraulic power – or a combination of both – to maximize overall machine efficiency and productivity.

2 Low Pressure Cell

3 High Pressure Cell

4 Spicer® Hydrostatic Continuously Variable Transmission

5 Hydrostatic Motors

PowerBoost uses its pressure cells to capture wasted energy, which is used to power the vehicle.

23

45

1

Up to

40%FUEL SAVINGS*

REDUCES Total Cost of Ownership

*Compared to conventional transmission technology

The Spicer® 990: An independent front suspension axle solutionFor open field tractors up to 372.9 kW (500 hp), the Spicer 990 axle offers high power and torque to improve both productivity and comfort. The system’s independent front suspension is designed to improve traction and increase speed, with integrated sensors that enhance driving quality. ABS and CTIS features are available options.

Integrated into the frame of the tractor, the 990 axle provides OEMs with easy assembly and reduced vehicle complexity.

Spicer® 990 Independent Front Suspension Axle

For Open Field Tractors Up to 372.9 kW (500 hp)

INSTALLATION DIMENSIONS (mm)

A – Flange to Flange 1,966

B – Planetary Hub Length – Hub to Hub 2,538

C – Wheel Pilot Diameter 370

D – Wheel Bolt Circle Diameter 425

TECHNICAL DATA

Planetary Reduction Ratio 6:1

Bevel Set Ratios 2.9:1

Overall Ratio 17.6:1

Maximum Output Torque (daNm) 11,960

Load Capacity (daN); Static 11,000

Load Capacity (daN); Dynamic 10,000

DESIGN FEATURES

Axle Mounting Integrated into vehicle frame

Bevel Gear Spiral bevel gear – Gleason cut

Input Flange Options 40 x 2 x 30 x 18 DIN 5482

Double Reduction 3 ground planets

Service Brakes Wet discs with pneumatic actuation

Differential Options 100% differential lock

Maximum Steering Angle – Degrees 39

A

B

CD

AGRICULTURAL MODULAR AXLES

Product Model

GenericDesigna-

tion

Engine HP

Max Output AvailablePlanetary

Ratio

RatioRange

(Overall)

SteerAngle

Flange to Flange A BCD B Brakes

Multidisc Differential

LockNm ft-lb mm in

10 M10 45 – 65 9,200 6,780 1:4.235 11.55 to 14.585 55º 1,580 62 205 No No

20 M20 65 – 90 13,000 9,580 1:6 11.571 to 17 55º 1,640 64 275 Yes Yes

25 M25 90 – 105 16,000 11,800 1:6 11.571 to 17 55º 1,640 64 275 Yes Yes

30 M30 105 – 125 21,000 15,480 1:6 14.571 to 17 55º 1,640 64 275 Yes Yes

40 M40 125 – 140 27,000 19,910 1:6 13.827 to 17.538 55º 1,640 to 1,800 64 to 70 275 Yes Yes

50 M50 140 – 220 42,000 30,970 1:6.353 13.827 to 17.104 55º 1,780 to 1,900 70 to 74 335 Yes Yes

60 M60 220 – 280 55,000 40,560 1:6.353 13.82 to 18.15 55º 1,780 to 1,900 70 to 74 335 Yes Yes

70 M70 300 – 410 80,000 59,000 1:7.07 16.97 55º 1,900 74 425 Yes Yes

A

B

Spicer® Agricultural Modular Axles33 to 301 kW (45 to 410 hp)

Spicer® Combine and Forage Harvester AxleUp to 97.5 kW (130 hp)

INSTALLATION DIMENSIONS (mm)

A – Flange to Flange 2,802

B – Planetary Hub Length 99

C – Wheel Pilot Diameter 220.6

D – Wheel Bolt Circle Diameter 275 (8 studs, M20 x 1.5)

TECHNICAL DATA

Planetary Reduction Ratio 6:1

Bevel Set Ratios 36/8

Maximum Output Torque (daNm) 2,592

Load Capacity (daN); Static 8,350

Load Capacity (daN); Dynamic 8,350

DESIGN FEATURES

Axle Mounting High pivot

Input Flange Options 8/16" SAE

Double Reduction Planetary Wheel End Single-stage planetary reduction

Service Brakes No

Differential Options Limited slip

Maximum Steering Angle – Degrees 48

Model 25 shown

DC

B

A

Suspended axle for forage harvester shown

For additional configurations, contact Spicer Driveshaft Engineering for specific application information.

Driveshafts for Agricultural Applications

Spicer Life Series®

Design Features• Centrally Located Grease Fitting• Increased Torque Capacity• Larger Diameter Slip Member

with Longer Splines• Permanently Lubricated Slip Spline• Smaller Swing Diameter• Two Boot Options: Thermoplastic

Hytrel®* or Seal Can Style

Available on Request• DIN Flanges• Extended Lubrication• Paint• Permanent Lubrication• SAE Flanges• Special Types

DriveshaftFunctional Torque Limit Swing Diameter

Nm ft-lb mm in

SPL® 55 5,500 4,057 134.9 5.300

SPL® 70 7,000 5,163 152.4 6.000

SPL® 100 10,000 7,376 154.0 6.630

SPL® 140 12,000 8,851 194.0 7.640

SPL® 140HD 14,000 10,326 194.0 7.640

SPL® 170 17,000 12,537 193.0 7.600

SPL® 250 22,000 16,226 193.0 7.600

SPL® 250HD 25,500 18,808 193.0 7.600

*Hytrel is a registered trademark of DuPont.

Spicer® Compact™ SeriesDesign Features• Bearing Package with Reduced

Maintenance or Maintenance-Free Options

• Increased Torque Capacity• Smaller Swing Diameters

Available on Request• DIN Flanges • Paint• Permanent Lubrication for High

and Low Temperatures• SAE Flanges• Special Types

DriveshaftFunctional Torque Limit Swing Diameter

Nm ft-lb mm in

2015 2,400 1,770 90.0 3.540

2020 3,500 2,580 98.0 3.860

2025 5,000 3,690 113.0 4.440

2030 6,500 4,800 127.0 5.000

2035 10,000 7,380 144.0 5.670

2040 14,000 10,330 160.0 6.300

2045 17,000 12,540 174.0 6.850

2047 19,000 14,010 174.0 6.850

2055 25,000 18,440 178.0 7.010

2060 30,000 22,130 196.0 7.720

2065 35,000 25,810 206.0 8.110

Spicer® Wing® SeriesDesign Features• Increased Torque Capacity• Reduced Maintenance• Sealed Slip Spline System• Triple-Lip Seal, Thrust Washer,

and Seal Guard Package

Available on Request• Paint• Permanent Lubrication for High

and Low Temperatures• Special Types

DriveshaftFunctional Torque Limit Swing Diameter

Nm ft-lb mm in

2C 1,490 1,099.0 87.0 3.430

4C 2,496 1,840.0 116.0 4.570

5C 4,357 3,213.0 123.0 4.840

6C 6,580 4,852.0 150.0 5.910

7C 10,700 7,892.0 158.0 6.220

8C 15,500 11,432.0 216.0 8.500

8.5C 20,300 14,972.0 175.0 6.890

9C 27,400 20,206.0 223.0 8.730

10C 39,700 29,284.0 225.0 8.860

11C 41,600 30,668.0 235.0 8.860

12C 62,200 45,876.0 301.0 11.850

12.5C 63,000 46,466.0 295.0 11.620

14.5C 108,000 79,657.0 326.0 12.840

15C 75,400 55,612.0 273.0 10.750

14C 120,600 88.950.0 360.0 14.170

Spicer® 10™ SeriesDesign Features• Easy-to-Service Universal Joints• Extended Spline Life• Low Friction Under Load• Reduced Thrust Load Under Pressure• Superior Needle Bearing Retention

Available on Request• DIN Flanges• Extended Lubrication • Paint• Permanent Lubrication• SAE Flanges• Special Types

DriveshaftFunctional Torque Limit Swing Diameter

Nm ft-lb mm in

1310 2,000 1,500 101.6 4.000

1350 3,400 2,500 115.8 4.560

1410 3,600 2,600 125.5 4.940

1480 5,500 4,000 134.9 5.310

1550 7,000 5,100 152.4 6.000

1610 Use Spicer Life Series® (SPL® 100)

1710 15,700 11,500 200.2 7.880

1760 Use Spicer Life Series® (SPL® 170)

1810 Use Spicer Life Series® (SPL® 250)

1810HD Use Spicer Life Series® (SPL® 250 or SPL® 250HD)

1880 Use Spicer® Wing® Series (9C and above) Use Spicer® Compact™ Series 2000 (2060 or SPL® 2065)

Application PolicyCapacity ratings, features, and specifications vary depending upon the model and type of service. Application approvals must be obtained from Dana; contact your representative for application approval. We reserve the right to change or modify our product specifications, configurations, or dimensions at any time without notice.

Dana Off-Highway Driveline Technologies3939 Technology DriveMaumee, Ohio, USA 43537

www.dana.com/offhighway

Sales Office – Asia-Pacific7th Floor, Tower B Hongwell International Plaza1602 Zhongshan Road WestShanghai 200235 China

Dana Italia Spa Via Linfano38062 - Arco (TN)Italy

©2016 Dana Limited OHSAG-012016 DOSG55500_52640

Victor Reinz® Sealing Products

Dana offers a comprehensive range of innovative sealing solutions for gasoline, diesel, and alternative fuel agricultural vehicles.

Our product offerings include:n Cylinder-head gasketsn Cylinder-head cover

modulesn Exhaust gasketsn Valve stem sealsn Heat shieldsn Secondary gasketsn Cam covers

Long® Thermal-Management Products

Dana delivers heat-transfer solutions that are uniquely engineered to meet the specific needs of agricultural vehicles.

Our product offerings include:n Engine oil coolersn Transmission oil coolersn Charge-air coolersn Special coolers for thermal

management of batteries and electronic components

Dana Power TechnologiesDana provides a full line of sealing and thermal-management power technologies for agricultural machine engines and transmissions.

Dana Global Replacement Parts and Service Dana operates two global service parts distribution centers and 67 authorized Spicer® Service Centers for customers in more than 100 countries. A global presence ensures local access to the parts and technical support that farmers demand. Dana provides a single source for Long® thermal-management, Spicer® drivetrain, and Victor Reinz® sealing system replacement parts. These precision-engineered, genuine parts offer the reliable performance required to minimize downtime and costs.

About Dana Holding CorporationDana is an integral partner for virtually every major vehicle and engine manufacturer worldwide. We are a leading supplier of drivetrain, sealing, and thermal technologies to the global automotive, commercial-vehicle, and off-highway markets. Founded in 1904, we employ thousands of people across six continents.

About Dana Off-Highway Driveline TechnologiesDana delivers fully optimized Spicer drivetrain systems and individual product solutions to customers in construction, agriculture, material-handling, underground-mining, and forestry markets, bringing global expertise to the local level with technologies customized to individual requirements through a network of strategically located technical centers, manufacturing locations, and distribution facilities.