aiphone model sbx-2bh, 2bv instr- westside wholesale - call 1-877-998-9378
TRANSCRIPT
7/29/2019 Aiphone Model SBX-2BH, 2BV Instr- Westside Wholesale - Call 1-877-998-9378
http://slidepdf.com/reader/full/aiphone-model-sbx-2bh-2bv-instr-westside-wholesale-call-1-877-998-9378 1/2
- INSTRUCTIONS -The SBX-2BH is a surface mount stainless steel enclosure designed for mounting two Aiphone 2-gang
devices horizontally. The SBX-2BV is a similar box used to mount the devices vertically. The enclosuresare weather resistant and include space for wiring inside. These boxes are designed for an intercom substation and HID-SS ProxPoint® Plus card reader to be mounted together in a uniform housing for a more
professional and aesthetically pleasing look.
Page
3 - 3 / 8
"4 - 1 1 / 1 6 "
9 - 5 / 8 "
2 - 3 / 8 "
3 - 5 / 1
6 "
2 - 3 / 8 "
4 -1 3 / 1 6 "
9 - 5 / 8 "
SBX-2BHSBX-2BV
INSTALLATION:
1. Mount SBX-2BH(V) to wall surface, or on two 1-gang boxesor rings spaced apart by 4-¾”, center-to-center.2. Connect supplied speed nuts to mounting ears (8 total).
3. Make wiring connections to devices to be installed in the box.4. Mount devices to box using screws provided.
5. Remove protective plastic film from the unit.
MountingEars
Mounting Ears
SAMPLE:
HID-SS and LE-SS mounted in SBX-2BH
NOTE: These are not 4-gang surface mount enclosures, but areenclosures for two separate 2-gang units. The intended use is formounting an intercom sub station and a card reader in the same
uniform housing.
7/29/2019 Aiphone Model SBX-2BH, 2BV Instr- Westside Wholesale - Call 1-877-998-9378
http://slidepdf.com/reader/full/aiphone-model-sbx-2bh-2bv-instr-westside-wholesale-call-1-877-998-9378 2/2
COMPATIBLE AIPHONE DEVICES:Card Reader:
HID-SS Stainless Steel ProxPoint® Plus Card Reader
LEF Series:
LE-SS Vandal Resistant Stainless Steel Sub StationLE-SSR Vandal Res. With Red Mushroom Call Button
LE-DA Door station with Stainless Steel Faceplate
NEM Series:
NE-SS Vandal Resistant Stainless Steel Sub StationNE-SSR Vandal Res. With Red Mushroom Call Button
NE-JA Door station with Stainless Steel Faceplate
AI-900 Series:AI-RS150 Standard Indoor Sub StationAI-RS160 Indoor Vandal Resistant Sub Station
AI-RS170 Exterior Vandal Resistant Sub StationAI-RS180 Exterior Emergency Sub Station
IE Series:
IE-SS Vandal Resistant Stainless Steel Sub StationIE-SSR Vandal Res. With Red Mushroom Call Button
IE-JA Door station with Stainless Steel Faceplate
SPECIFICATIONS:
Mounting: Two 1-gang boxes, or surface mount directly to wall surfaceMaterial: 16-Gauge Stainless SteelColor: Polished Stainless SteelMounting Hardware: 8x32 with T-15 Torx Head
Dimensions (HxWxD)SBX-2BH: 4-11/16" x 9-3/5" x 3-3/8" (top); 2-3/8" (bottom)
SBX- 2BV: 9-3/5" x 4-11/16" x 3-3/8" (top); 2-3/8" (bottom)Interior Depth: 2-3/16"
SBX-2BH/V InstrPHJS0605
4-¾”
SBX-2BH
(rear view)SBX-2BV
(rear view)
4 - ¾”
Aiphone Communication Systems
1700 130th Ave. N.E.Bellevue, WA 98005
(425) 455-0510FAX (425) 455-0071
TOLL FREE TECHNICAL SUPPORT:
(800) 692-0200TOLL FREE FAX LINE:
(800) 832-3765E-MAIL: [email protected]
MOUNTING:
If the unit will be mounted to two 1-gang boxes or rings, the mounting hardware should beseparated by 4-¾” center-to-center, either vertically or horizontally depending on the unit.
1 - ½”