aisg mts web - - azimuth measuring tools and ... · pdf fileaisg-mts retrofit inline...

2
AISG-MTS Retrofit Inline Mechanical Tilt Sensor The AISG-MTS is a retrofit device for the AISG RET Antenna Control Unit. It allows you to measure realtime (up to 0.1° accuracy) how much the antenna is tilted and how much it is rolled. With the AISG-MTS it will be easier to make adjustments to your antenna for an optimal antenna setup. It is compatible with many control units as tested on Kathrein, RFS, Andrew, Gemintek, Amphenol Antel and Nokia node B. Field installation takes only a few minutes per antenna, configuration is automatically achieved by the AISG protocol. AISG-MTS key features: The SPAA05-MTS directly shows the tilt and roll of an antenna. The tool can measure a real-time tilt and roll up to 0.1° without sending a mechanic up the tower every time you need to check the antenna. The MTS is using the AISG 2.0 standards interface as Virtual RET. The MTS is also compatible with the future extention specification A.A.S. and the future version 2.1 extention specification C.A.D. Easy Retrofit installation. Made in the Netherlands | www.spaa05.com | [email protected] | +31 416 565 005 SPAA05.com Antenna alignment solutions for professionals ®

Upload: leliem

Post on 20-Mar-2018

228 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: AISG MTS web - - Azimuth measuring tools and ... · PDF fileAISG-MTS Retrofit Inline Mechanical Tilt Sensor ... Amphenol Antel and Nokia node B. Field installation takes only a few

AISG-MTSRetrofit Inline Mechanical Tilt Sensor

The AISG-MTS is a retro�t device for the AISG RET Antenna Control Unit. It allows you to measure realtime (up to 0.1° accuracy) how much the antenna is tilted and how much it is rolled.

With the AISG-MTS it will be easier to make adjustments to your antenna for an optimal antenna setup. It is compatible with many control units as tested on Kathrein, RFS, Andrew, Gemintek, Amphenol Antel and Nokia node B.

Field installation takes only a few minutes per antenna, con�guration is automatically achieved by the AISG protocol.

AISG-MTS key features:

The SPAA05-MTS directly shows the tilt and roll of an antenna.The tool can measure a real-time tilt and roll up to 0.1° without sending a mechanic up the tower every time you need to check the antenna.

The MTS is using the AISG 2.0 standards interface as Virtual RET.The MTS is also compatible with the future extention speci�cation A.A.S. and the future version 2.1 extention speci�cation C.A.D.

Easy Retro�t installation.

Made in the Netherlands | www.spaa05.com | [email protected] | +31 416 565 005

SPAA05.comAntenna alignment solutions for professionals

®

Page 2: AISG MTS web - - Azimuth measuring tools and ... · PDF fileAISG-MTS Retrofit Inline Mechanical Tilt Sensor ... Amphenol Antel and Nokia node B. Field installation takes only a few

AISG-MTS Technical speci�cations

Made in the Netherlands | www.spaa05.com | [email protected] | +31 416 565 005

CommunicationAISG Protocol V 2.0

MeasurementAccuracy: Available in: 1.0° rms 0.5° rms 0.2° rms 0.1° rms

Range Tilt/Roll: 90° to -90°

MechanicsDimensions: length 4.0 cm width 2.3 cm height 4.2 cmWeight: 0.075 kg

PowerType: DC 10 - 30V power consumption: 8mA

EnvironmentalOperating temperature: -40°C to 125°C (-40°F to 257°F)Storage temperature: -40°C to 125°C (-40°F to 257°F)Humidy: 95% non-condensingProtection: IP68

Feature• Compatible with future extention specification A.A.S.• Compatible version 2.1 extention specification C.A.D.• Version with lightning protection available

Evaluation kit available

© Copyright 2010, SPAA05.com. All rights reserved. Speci�cations subject to change without notice.SPAA05, SPAA05.com, SPAA05-MTS and their respective logos are registered trademarks of SPAA05.com.Made in the Netherlands. Patent pending.

SPAA05.comAntenna alignment solutions for professionals

®

MEMBER OF