alloy-cross-reference-table.pdf
TRANSCRIPT
Alloy Cross Reference TableTable 1Table 2
Sheet 1: Table 1AlloyUNS
Standard MaterialDescription
TypicalProperties andApplications
MachinabilityRating
SAE British European German DIN JapanDesignation Symbol Designation Symbol Designation Symbol Designation Designation
C83600 ASTMB271/ASTMB505
Leadedgunmetal
Excellentmachinability,mediumstrength, goodpressuretightness; notsubject todezincification.
85 40/J462 LG2 CuSn5Pb5Zn5 CC491K CuSn5Zn5Pb5 2.0196 (RG5) CuSn5ZnPb* CAC402C (BC6) U-E5Pb5Z5
C84400 ASTMB505
Leadedgunmetal
Excellentmachinability;widely used inthe pumpindustry for bowland lineshaftbearings.
90 40/5A LG1 CuSn3Pb5Zn8 CC490K CuSn3Zn8Pb5 2.1098 CuSn2ZnPb* CAC401 (BC1)* CuSn3Zn8Pb5*
C85200/C85210
ASTMB271
Leadedyellowbrass
A generalpurpose alloywithgood machiningproperties.
80 J461/J462 SCB1 CuZn25Pb3Sn2 - - - - -
C85700/C85710
ASTMB271/ASTMB505
Leadedyellowbrass
Corrosion-resisting butstrength andbearingrequirements areshortcoming.Suits brasshatches,fittingsand frames.Chest hinges,brackets, clips,brass valves,brass pipeflanges and shiptrims are alsosuitable.
80 6C DCB3* CuZn40Pb CC754S CuZn39Pb1Al-C 2.0342 CuZn33Pb*/CuZn37Pb
CAC203 (YbsC3)*
C86200 ASTMB271/ASTMB505
Highstrengthmanganesebronze
Superior strengthand toughness.It's resistance tocorrosion byseawater isunsatisfactory.Typicalapplications:whorm wheelsand gears.
30 430A HTB2* CuZn25Al5Mn4Fe3* CB762S CuZn25Al5Mn4Fe3 2.0608* CuZn34Al2* CAC303(HBsC3)
C86300 ASTMB271/ASTMB505
Highstrengthmanganesebronze
Exceptionalstrength, goodwearingproperties andgood ductibilitybut has only fairmachinability.
25 430B HTB3* CuZn28Al5FeMn CC762S CuZn25Al5Mn4Fe3 2.0598 CuZn25Al5* CAC304(HBsC4)
C86400 ASTMB271/ASTMB505
Leadedmanganesebronze
Excellentmachinability.Used wherestrength ortoughness plusresistance toseawatercorrosion isrequired.Suitable forshock loadedslides, bearings,whorm wheels,framing, hubs,lever arms,gears and liners.Susceptible tostress corrosion.
65 7A* DCB1* CuZn40Pb* CC755S* CuZn39Pb1AlB* 2.034* CuZn37Pb* CAC301/CAC302
C86500 ASTMB505
Manganesebronze Hightensilebrass
Good strengthand reasonablemachinability.Suitable formachinery partsrequiringstrength andtoughness, butsusceptible todezincification.
30 43 HTB1 CuZn35AlFeMn CC765S CuZn35Mn2Al1Fe1-C* 2.0592 CuZn34Al2* CAC301C(HBsC1)
UZ 36 MNA
C86700 ASTM B271
Leadedmanganesebronze
This alloy doesnot respond toheat treatment.
55 n/a HTB2* CuZn34Mn3Al2Fe1* CC764S* CuZn35AlFeMn - CuZn34Al2* CAC302C(HBsC2C)*
C90500 ASTMB271/ASTMB505
Tin bronze Unleaded hardbronze withexcellentwearingproperties.Preferred forguides, bushingsoperating at veryhigh loads at lowspeed, gearsand worms.
50 62 G1* CuSn10Zn2 - CuSn10Zn2 2.1086 (RG10) CuSn10Zn* CAC403C (BC3) U-E12P*/U-E8Z2*
C90700/C90710
ASTMB505
Tin bronze/Phosphorbronze
Goodmachinability,high strengthand goodcorrosionresistance.
30 65 PB1* CuSn10P CC481K CuSn10-P 2.1050 CuSn10 CAC502C(PBC2C)
U-Z 10 90/10
Page1 of 4AW Fraser - Alloy Cross Reference Table
10/1/2014http://www.awfraser.co.nz/alloy-cross-reference-table.html
Suitable forheavy-dutygears andbearings withmedium to highloads.
C90800/C90810
AS 1565 Gearbronze/Phosphorbronze
High strength,goodmachinabilityand corrosionresistance.Suitable forheavy dutygears/bearingswith medium tohigh loads. Goodresistance toimpact loading.
30 65* PB2 CuSn11P CC483K CuSn12 2.1052 CuSn12* CAC502C(PBC2C)*
C91700 ASTMB505
Nickel tinbronze
Fine-grainedstructure forimprovedstrength andwear resistance.Suitable forhigher-stressed,fast-runningworm gears andhelical gears.
40 640 CT2* CuSn12Ni* CC484K* CuSn12Ni2* 2.1060* CuSn12Ni* -
C92200 ASTMB271/ASTMB505
Leaded tinbronze
Medium strengthand resistance tosaltwatercorrosion. Lowand mediumpressure valves,castings for sterntube andpropeller shaftsleeves, hosecouplings, fittingsand cocks. Goodbrazing quality.
42 622 LG3 G-CuSn7Pb4Zn2 CC498K CuSn6Zn4Pb2* - CuSn6Zn4Pb2* CAC407 U-E7Z5Pb4
C92500 ASTMB505
Leaded tinbronze
Bearing bronze 30 640 - - CC482K CuSn11Pb2* 2.1063* GB-CuSn12Pb*
-
C92700 ASTMB505
Leaded tinbronze
Bearings, shafts,gears and wormwheels. Shock,highcorrosion/erosionresistance. Usedfor hard shaftsand heavy dutygears due thecombination ofhigh workingload, high speed,impact leading orpounting.
45 63 PB4* - CC480K CuSn11Pb2* 2.1050* CuSn12P * LBC2
C93200 ASTMB505
Leadedgunmetal
Excellentmachinability,good hardness,strength andwear resistance.Not subject todezincificationand hasreasonableresistance toseawater.
70 660 SAE660 - CC493K CuSn7Zn4Pb7 2.1090 (RG7) CuSn7ZnPb* -
C93500 ASTMB505
High leadedtin bronze
Good generalpurpose bronzefor applicationsinvolving highspeeds at lowloads.
70 66* LB4 CuSn5Pb9 CC494K CuSn5Pb9* - - -
C93700 ASTMB505
Leadedbronze
Leaded tinbronze withexcellentmachinability,medium strengthand goodcorrosionresistance. Willwithstand mildacids as found inmine water.
95 64 LB2 CuSn10Pb10 CC495K CuSn10Pb10 2.1176 CuPb10Sn CAC603C(LBC3C)
C94100 ASTMB505
High leadedtin bronze
For bearings orbushings underlight loads andhigh speeds.Suits if bearingmetal mustdeform slightly toconform toirregular motionor perfect fit.Effective whenlubrication isdifficult.
80 Backing/794/799
LB5* CuPb20Sn5 CC497K CuPb20Sn5* 2.1188 CuPb20Sn CAC605C CuPb20Sn5
C95300 ASTMB271
Aluminiumbronze
A heavy duty,dense, high-strength alloywith hardnessequal tomanganesebronze. Excellentresistance tocorrosion andfatigue. Goodwearing qualitiesfor elevatedtemperatureuses. Properprecautions andcontrols arenecessary toobtain
35 68B AB1* - - CuAl9* - - CAC701C
Page2 of 4AW Fraser - Alloy Cross Reference Table
10/1/2014http://www.awfraser.co.nz/alloy-cross-reference-table.html
satisfactorywelds.
C95400 ASTMB271/ASTMB505
Aluminiumbronze
Excellent wearresistance, goodimpactresistance andreasonablecorrosionresistance.Suitable for highstrengthbearings.
50 9C AB1 CuAl10Fe3 CC331G CuAl10Fe3 2.0940* CuAl11Fe4 CAC702C*
C95500/C95520
ASTMB271/ASTMB505
Nickelaluminiumbronze
Good wearproperties, suitedfor elevatedtemperatures.Heavy duty, highstrength alloywith excellentresistance tocorrosion andfatigue.
50 9D/68B AB2* - CC333G CuAl10Fe5Ni5 2.0981*/2.0940* CuAl11Ni* CAC703* U-A11N5FeY200
C95800 ASTMB505
Nickelaluminiumbronze
Widely used formarineapplications,having superiorcorrosionresistance, highstrength, goodwear anderosionresistance.
40 68B/630 AB2* CuAl10Fe5Ni5* CC333G CuAl10Fe5Ni5 2.0970/2.0975 CuAl10Ni* CAC703C(A1BC3)*
U-A9N5FeY200*
While every care has been exercised in compiling and publishing the data contained in these tables, A W FraserLimited accepts no responsibility for errors or omissions of the information.
Sheet 2: Table 2AlloyUNS
Standard MaterialDescription
TypicalProperties
andApplications
MachinabilityRating
SAE British European German DIN Japan FrenchDesignation Symbol Designation Symbol Designation Symbol Designation Designation
C35330 AS/NZS1567
Dezincificationresistantmachiningbrass
Arsenicalleadeddezincificationresistant alloywith goodmachiningperformance.Meetsrequirementsof AS4020 forproductsused incontact withdrinkingwater.
80 n/a CZ132* - CW602N CuZn36Pb2As* 2.0371 CuZn36Pb3* - -
C36000 ASTMB16
Brass: freemachining/free cutting
High speedrepetitionwork withductility forlight riveting.
95 72/J461/J463
CZ124 CuZn36Pb3 CW603N CuZn36Pb3 2.0375 CuZn36Pb3 C3601 CuZn36Pb3
C37700 ASTMB124
2% leaded60/40 forgingbrass
Standard hotforging brassfor a widerange ofuses.
80 88/J461 CZ106/122/ PCB1
CuZn38Pb2 CW617N CuZn39Pb2 2.0380 CuZn39Pb* C3603/C3771 CuZn38Pb2*
C38500 ASTMB455
Freemachiningbrass/architecturalbronze
Maximumproductivityand tool lifeon highspeedrepetitionwork.
100 72*/J461*/J463* CZ121 CuZn39Pb3 CW614N CuZn39Pb3 2.0401 CuZn39Pb3 C3604 CuZn40Pb3*
C46400 ASTMB21
Naval brass Improvedcorrosionresistance;bolts, fittingsetc. in marineuse.Low leadcontent foruse whereenvironmentalaspects maybe a concern.
30 73/J461/J463
CZ112*/113*/133*
- CW719R CuZn38Sn1 3.0530 - C4641 -
C48600 AS/NZS1567
Dezincificationresistantforging brass
Arsenicalleadeddezincificationresistant alloywith goodmachiningperformanceand good hotforgingproperties.
80 n/a - - - CuZn36Pb2Sn1 2.0371 CuZn38Pb1* - CuZn36Pb2Sn1*
C64200/C64300
ASTMB150
Aluminium-silicon bronze
High strengthaluminiumbronze;excellentcorrosionresistance,good forgingpropertiesand fairmachinability.
60 J461/J463 CA107 CuAl7Si2 CW301G/CW302G
CuAl6Si2Fe/CuAl7Si2
- CuAl7Si2 - CuAl7Si2*
C67300 AS/NZS1567
Silicon-manganesebronze
Excellentwearresistance; forbushings,gear blanksand hydraulicpumpcomponents.
70 J461/J463 - - - - - - - -
C68600 70 n/a CZ114/115 - CW716R* CuZn38Mn1Al* 2.0510*/2.0561* - CuZn39Mn1AlPbSi*
Page3 of 4AW Fraser - Alloy Cross Reference Table
10/1/2014http://www.awfraser.co.nz/alloy-cross-reference-table.html
AS/NZS1567
Leadedmanganesebrass
Combineshigh strengthwith fairmachinabilityand hotforgability.
CuZn37Al*/CuZn40Al1*
While every care has been exercised in compiling and publishing the data contained in these tables, A WFraser Limited accepts no responsibility for errors or omissions of the information.
Page4 of 4AW Fraser - Alloy Cross Reference Table
10/1/2014http://www.awfraser.co.nz/alloy-cross-reference-table.html