ALU 7450 Command ReferenceSteve Strong – Alcatel-Lucent

Issue 1 - January 20, 2010

1) Physical

show usersshow cardshow card 1 detailshow card Ashow card Bshow mdashow mda 1/1 detailshow chassisshow chassis | match MACshow portshow port 1/1/1show port 1/1/1 detailshow port 1/1/1 ethernet lldp show port 1/1/1 ethernet lldp detailshow port 1/1/1 ethernet lldp remote-infoshow lagshow lag 1 detailshow lag 1 statistics

show qos sap-ingressshow qos sap-egressshow qos queue-groupshow qos queue-group detail

show bofbof saveadmin saveadmin save <file name>### admin reboot ### disruptive ###admin redundancy synchronize boot-envadmin redundancy synchronize configadmin set-time YYYY/MM/DD hh:mm[:ss]

2) B-VID

show service id 10 baseshow service id 1 stpshow service id 1 stp detailshow service id 10 mrpshow service id 10 mmrp macshow service id 10 fdbshow service id 10 fdb detailshow service id 1012 baseshow service id 10 i-vplsshow service id 1012 epipe

3) Service

above commands – ‘base’ and ‘fdb’ are the most important plus the following:

show service service-usingshow service service-using vplsshow service service-using vpls | match b-VPLSshow service service-using epipeshow service id 101010 sap show service id 101010 sap lag-101:100 show service id 101010 sap lag-101:100 baseshow service id 101010 sap lag-101:100 statsshow service id 101010 sap lag-101:100 detail

4) Troubleshooting

All above commands for service and physical plus below…

monitor lag 100monitor lag 100 ratemonitor lag 100 rate interval 5monitor port 1/1/1monitor port 1/1/1 rate

show log log-id 99

clear log 99

clear lag 100 statisticsclear port 1/1/1 statisticsclear port 1/1/1 queue-group <queue-group-name> {ingress|egress} statistics

clear service id 10 fdbclear service statistics id 10 countersclear service statistics id 10 mrpclear service statistics id 10 stpclear service statistics sap lag-100:100 counters

5) General

terminal settings:

environment no moreenvironment moreenvironment time-stampenvironment no time-stamp

Root Commands

admin + Administrative commands for the system bof + Configure the Boot Options File clear + Commands to clear statistics for a specified entity or to clear and reset the entity configure + Configuration commands [no] debug + Enable/disable debugging and specify debug options environment + Environment preference setup commands file + File system commands help - Display help monitor + Commands to monitor statistics password - Change the current password show + Display configuration and operation information tools + Useful tools for debugging purposes

Global Commands :

back - Go back a level in the command tree echo - Echo the text that is typed in enable-admin - Enable the user to become a system administrator exec - Execute a file - use -echo to show the commands and prompts on the screen exit - Exit to intermediate mode - use option all to exit to root prompt help - Display help history - Show command history info - Display configuration for the present node logout - Log off this system mrinfo - Request multicast router information mstat - Trace multicast path from a source to a receiver and display multicast packet rate and loss information mtrace - Trace multicast path from a source to a receiver oam + OAM Test Suite ping - Verify the reachability of a remote host pwc - Show the present working context sleep - Sleep for specified number of seconds ssh - SSH to a host telnet - Telnet to a host traceroute - Determine the route to a destination address tree - Display command tree structure from the context of execution write - Write text to another user

Root Show Options

A:ps# show - show

alias - Display existing aliases application-as* + Display application assurance information aps - Display Automated Protection Switching (APS) information bof - Display boot options file information boot-messages - Display boot messages configured card - Display physical card related information ccag - Display CCAG related information cflowd + Display cflowd information chassis - Display chassis information config - Display existing config cron + Display CRON related data debug - Display which debug points have been set dot1ag + Show 802.1ag CFM information egress-replica* + Display Egress Replication lists filter + Display IP/MAC filter and counter related information ipsec + Display IPsec related information isa + Display ISA information lag - Display LAG information li + Display Lawful Intercept (LI) Information log + Display event and accounting policy log information mcast-manageme* + Show multicast path management related information mda + Display MDA information mirror - Display mirror configuration and operation information multilink-bund* + Display multilink bundle information pools - Display pool information port + Display physical port information port-tree - Display tree for SONET/SDH or TDM ports/channels qos + Display QoS information redundancy + Display redundancy information router + Display router instance information saa - Show SAA test results service + Display services related information snmp + Display snmp configuration srrp - Display information related to SRRP subscriber-mgmt + Display subscriber management information system + Display system information test-oam + Display oam ldp treetrace information time - Display time uptime - Display time since system started users - Display list of users who are logged in version - Display version vrrp + Display information related to VRRP policies

Show QoS Options:

A:ps# show qos - qos

atm-td-profile - Display ATM traffic descriptor profile information dscp-table - Lookup DSCP Name-value mappings hsmda-pool-pol* - Display HSMDA Pool policy information hsmda-pools - Display HSMDA Pools information hsmda-schedule* - Display HSMDA Scheduler hierarchy information hsmda-schedule* - Display HSMDA Scheduler policy information hsmda-slope-po* - Display HSMDA Slope policy information mlppp-profile-* - Display MLPPP ingress profile information mlppp-profile-* - Display MLPPP ingress profile information named-pool-pol* - Display configured named-pool policy information network - Display Network policy information network-queue - Display Network policy information port-scheduler* - Display Port-Scheduler policy information sap-egress - Display Sap Egress policy information sap-ingress - Display Sap ingress policy information scheduler-hier* + Display Scheduler hierarchy information scheduler-name - Display Scheduler policies which have this scheduler scheduler-poli* - Display Scheduler policy information scheduler-stats + Display Scheduler statistics information shared-queue - Display Shared policy information slope-policy - Display Slope policy information

Show Port Options:A:ps# show port - port [port-id] [statistics] [detail] - port <port-id> associations - port [port-id] description - port <port-id> dot1x [detail] - port aps - port cem - port <port-id> atm ... - port <port-id> cisco-hdlc ... - port <port-id> ethernet ... - port <port-id> frame-relay ... - port <port-id> ppp ... - port <port-id> secondary-shaper <secondary-shaper-name> [associations]

<port-id> : slot[/mda[/port]] or slot/mda/port[.channel] aps-id - aps-<group-id>[.channel] aps - keyword group-id - [1..64] ccag-id - slot/mda/<path-id>[cc-type] path-id - [a|b] cc-type - [.sap-net|.net-sap] <detail> : keyword - displays detailed information <associations> : keyword - displays port associations <description> : keyword - displays port description <dot1x> : keyword - displays dot1x information <aps> : keyword - displays ports on aps groups <cem> : keyword - displays cem encap ports and channels <statistics> : keyword - displays port statistics.

atm + Display ATM port information cisco-hdlc - Display Cisco-HDLC port information ethernet - Display ethernet port information frame-relay - Display frame-relay port information ima-link - Show IMA link data ppp - Display PPP port information secondary-shap* - Display port secondary shaper information

Show Service Options:

A:ps# show service - service

active-subscri* - Display active subscriber information customer - Display customer information egress-label - Display services using range of egress labels egress-multica* - Display egress multicast group information fdb-info - Display FDB information fdb-mac - Display FDB entry for a given MAC address id + Display Information for a particular service-id ingress-label - Display services using a range of ingress labels isid-using - Display services using ISID l2-route-table - Display Layer-2 route information sap-using - Display SAP information sdp - Display SDP information sdp-using - Display services using certain options service-using - Display services using certain options subscriber-usi* - Display subscribers using certain options

Config Service Options

A:ps# configure service - service

[no] apipe + Provision an ATM-Pipe Service [no] cpipe + Provision a Circuit Emulation Pipe Service [no] customer + Provision a customer [no] egress-multica* + Create an Egress Multicast Group [no] epipe + Provision an Ether-Pipe Service [no] fpipe + Provision a FR-Pipe Service [no] ies + Provision an Internet Enhanced Service [no] ipipe + Provision an IP-Pipe Service [no] pe-discovery-p* + Configure Provider Edge Discovery Policy [no] pw-template + Configure a pseudowire template policy [no] sdp + Provision a SDP [no] vpls + Provision a Virtual Private LAN Service [no] vprn + Provision a VPRN Service

Config Service VPLS Options

A:ps# configure service vpls - vpls <service-id> [customer <customer-id>] [vpn <vpn-id>] [m-vpls] [b-vpls|i-vpls] [create] | no vpls <service-id>

<service-id> : [1..2147483647] <customer-id> : [1..2147483647] <create> : keyword - mandatory while creating an entry. <vpn-id> : [1..2147483647] <m-vpls> : keyword - creates a management VPLS <b-vpls|i-vpls> : keyword - creates a backbone-vpls or ISID-vpls

[no] backbone-smac - Configure backbone source MAC address used for PBB [no] backbone-vpls + Configure b-vpls service associated with this i-vpls [no] bgp-ad + Configure BGP auto-discovery [no] def-mesh-vc-id - Configure default mesh vc-id default-gtw + Configure a service default gateway [no] description - Description for the service [no] disable-aging - Enable/disable aging of MAC addresses [no] disable-learni* - Enable/disable learning of new MAC addresses [no] discard-unknown - Enable/disable discarding of packets with unknown destination mac addresses [no] endpoint + Configure a service end-point [no] fdb-table-high* - Configure the high watermark for the FDB table [no] fdb-table-low-* - Configure the low watermark for the FDB table [no] fdb-table-size - Configure the maximum number of MAC entries in the FDB [no] gsmp + Configure GSMP connections maintained in this service [no] host-connectiv* - Enable/disable host connectivity verification for all hosts igmp-snooping + Configure IGMP snooping parameters [no] interface + Create/delete or configure an IP interface [no] local-age - Configure aging time for locally learned mac addresses [no] mac-move + Configure Mac Move and its attributes mac-protect + Configure Mac Protection

Config Service EPIPE options

A:ps# configure service epipe - epipe <service-id> [customer <customer-id>] [create] [vpn <vpn-id>] [vc-switching] - no epipe <service-id>

<service-id> : [1..2147483647] <customer-id> : [1..2147483647] <create> : keyword - mandatory while creating an entry. <vpn-id> : [1..2147483647] <vc-switching> : keyword - create a vc-switching Epipe

[no] description - Description for the service [no] endpoint + Configure a service end-point [no] pbb-tunnel - Configure pbb-tunnel with b-vpls service information [no] sap + Provision a SAP [no] service-mtu - Configure service MTU [no] shutdown - Administratively enable/disable the service [no] spoke-sdp + Provision a spoke SDP binding [no] mesh-sdp + Provision a mesh SDP binding [no] mfib-table-hig* - Configure the high watermark for the MFIB table [no] mfib-table-low* - Configure the low watermark for the MFIB table [no] mfib-table-size - Configure the maximum number of SG entries in the MFIB mld-snooping + Configure MLD snooping parameters mrp + Configure MRP attributes [no] multicast-info* - Configure multicast information policy [no] pim-snooping + Configure PIM snooping parameters [no] propagate-mac-* - Propagate MAC flush frames from LDP peer to all mesh-SDP and Spoke-SDPs [no] radius-discove* + Enable/disable RADIUS discovery [no] remote-age - Configure aging time for remotely learned mac addresses [no] sap + Provision a SAP [no] send-bvpls-flu* - Enable/disable sending MAC withdraw message in b-vpls for i-vpls [no] send-flush-on-* - Enable/disable sending MAC withdraw message on SAP/Spoke-SDP failure [no] service-mtu - Configure service MTU [no] shutdown - Administratively enable/disable the service [no] split-horizon-* + Configure a split horizon group [no] spoke-sdp + Provision a spoke SDP binding stp + Configure STP parameters