aluminum sliding glass corner meet door · 2014. 9. 9. · 6-22 june 2011aluminum sliding glass...
TRANSCRIPT
June 2011226-
Aluminum Sliding Glass Corner Meet DoorSeries SGD780
Specifications:
• Door members are extruded from a minimum of 6063-T6 aluminum alloy(except where noted)
• Finish is white or bronze• Glazing is exterior• Mortise locks standard on all doors• Maximum panel size 5' x 8' or 4' x 10'• Available in standard and custom sizes• Primary door always has the locking jamb at the corner• All doors are viewed from outside looking in• Track quantity will be the same on both doors based on the unit with the
most panels• Frame members may vary in depth according to configuration• Maximum of 4 tracks overall per side• Screens not available• Panels at corner always meet on the outer most track (see drawing) on
both inside and outside corner• Stainless steel assembly screws and stainless steel tandem rollers• 2 3/4" exterior sill standard• 7/16" laminated glas• Sill is clear anodize
WinGuard brand windows refer only to those products that are glazed with PGT laminated glass. Monolithic glazing does not provide hurricane protection.
EXTERIOR
OUTSIDE CORNERPRIMARY LEFT
Note: PGT reserves the right to change material design and/or construction withoutnotice or liability
Options:
• 1 1/16" Laminated insulating glass• Double applied ogee colonial muntins• Laminated colonial insulating glass (muntins between monolithic tempered cap and laminated glass)
• Simulated divided lite (double applied ogee muntins with muntins between the monolithic tempered cap and laminated glass)
• Multi-panel by-pass and pocket styles• Popular glass tints• Tandem nylon roller assembly (no up charge), limited by panel weight• 1 5/8" sill• 2 3/4" sill • 4 1/2" sill• 5 1/4" sill• Optional 9" bottom rail (no up charge)• Satin nickel or polished brass PVD hardware• Argon gas (laminated insulating glass only)• Low-E• Premium frame colors are Arizona Beige, Pebble Khaki, Venetian Bronze, Clear Anodize and ETERNA® Finish
• ETERNA® Finish: Acacia, Cherry, Dark Oak, Dark Walnut
Notes:
• Doors are tested in accordance with PA/TAS 201, 202, and 203 specifications
• Tested impact resistance to ASTM E1886 and E1996• Tested forced entry resistance to AAMA 1303.5-1976 and
ASTM F842-04• Tested air infiltration to ASTM E283• Tested water resistance to E547/E331• Florida Product Approval available• Test reports available upon requests• Miami Dade County N.O.A.
EXTERIOR
OUTSIDE CORNERPRIMARY RIGHT
EXTERIOR
INSIDE CORNERPRIMARY LEFT
EXTERIOR
INSIDE CORNERPRIMARY RIGHT
June 2011 236-
Aluminum Sliding Glass Corner Meet DoorSeries SGD780
OUTSIDE CORNER
Calculations for determining overall door size andpocket track dimensions:
By-Pass Door
Straight by-pass door dimension (from catalog)+ 2.476 = finished corner door dimension
Pocket Door
Straight pocket door finished opening (from catalog)+ 2.476 = finished corner door dimension
Straight pocket door track length (from catalog)+ 2.476 = corner pocket door track length
Shown as Primary Left 4 panel XXXX Pocket with aRight 4 panel XXXO By-Pass viewed from outside looking in
Shown with a Primary Right 4 panel XXXX By-Pass with aLeft 4 panel XXXX By-Pass viewed from outside looking in
INSIDE CORNER
Calculations for determining overall door size andpocket track dimensions:
By-Pass Door
Straight by-pass door dimension (from catalog)+ 2.476 + (((# of tracks-1) * 2.529) + 0.708)= finished corner door dimension
Pocket Door
Straight pocket door finished opening (from catalog)+ 2.476 + (((# of tracks-1) * 2.529) + 0.708)= finished corner door dimension
Straight pocket door track length (from catalog)+ 2.476 + (((# of tracks-1) * 2.529) + 0.708)= corner pocket door track length
Note: All dimensions are taken from the outer most point of the track (see drawings above).
OUTSIDE CORNER
LEFTDOOR
RIGHT DOOR
EXTERIOR
RIGHTDOOR
LEFT DOOR
EXTERIOR
INTERIOR
INSIDE CORNER
TRA
CK
LE
NG
TH =
(STR
AIG
HT
BY-
PAS
S D
OO
R +
2.4
76)
+(((
# O
F TR
AC
KS
- 1)
* 2
.529
+ .7
08)
TRACK LENGTH = (STRAIGHT BY-PASS DOOR + 2.476+ ((( # OF TRACKS - 1) * 2.529) + .708)
FIN
ISH
ED
OP
EN
ING
= (S
TRA
IGH
T P
OC
KE
T D
OO
R +
2.4
76)
TRA
CK
LE
NG
TH=
(STR
AIG
HT
PO
CK
ET
DO
OR
TR
AC
K +
2.4
76)
1. Specify Inside or Outside corner (viewed from outside looking in)
2. Specify Primary Left or Primary Right
3. Select any combination of the left and right door configurations below• By-Pass to By-Pass • Pocket to Pocket• By-Pass to Pocket • Pocket to By-Pass
4. Left door size or custom size
5. Right door code size or custom size
6. Pricing: Determine the price of the primary door and all the options then price the secondarydoor and all options. Add the two straight door prices together and add $600 to the combined list price for the corner assembly.
June 201124
PLACING AN ORDER
6-
Aluminum Sliding Glass Corner Meet DoorSeries SGD780
�
�
n/a
�
n/a
�
n/a
n/a
�
�
�
�
�
�
X
XX
OX
XXX
OXX
XXXX
OXXX
n/a
�
�
�
�
�
�
�
�
n/a
�
n/a
�
n/a
RIGHT DOOR
Configurations Pocket By-Pass Configurations Pocket By-Pass
LEFT DOOR
X
XX
XO
XXX
XXO
XXXX
XXXO
June 2011 256-
Aluminum Sliding Glass Corner Meet DoorSeries SGD780
CORNER - PANEL TYPESPANEL LETTER
CS
QS
ASSA
CF
ASTRAGAL RECEIVER
CORNERLOCKSTILE
SC
SQ
FC
ASTRAGALRECEIVER
SINGLEINTERLOCK
SINGLEINTERLOCK
SINGLEINTERLOCK
SINGLEINTERLOCK
CORNER LOCKSTILE
ASTRAGALRECEIVER
SINGLEINTERLOCK
SINGLEINTERLOCK
ASTRAGALRECEIVER
ASTRAGAL RECEIVER
ASTRAGAL RECEIVER
FIXEDLOCKSTILE
FIXEDLOCKSTILE
CIIC
CORNERLOCKSTILE
SINGLEINTERLOCK
SINGLEINTERLOCK
CORNER LOCKSTILE
KADM
LOCKSTILE
SINGLEINTERLOCK
SINGLEINTERLOCK LOCKSTILE
SINGLEINTERLOCK LOCKSTILE
SINGLEINTERLOCK
LOCKSTILE
BF
SINGLE INTERLOCK
SINGLE INTERLOCK
SINGLEINTERLOCK
SINGLEINTERLOCK
PFIXED
LOCKSTILER
SINGLEINTERLOCK
FIXEDLOCKSTILE
SINGLE INTERLOCK
Left Hand Pockets(pictured below)
A
A
B
AB
B
AB
B
B
Finishedopening
Panel type for Right Hand - M, F, F
Panel type for Right Hand - M, F
Panel type for Right Hand - M
Panel type for Right Hand - M, F, F, F
June 2011266-
Aluminum Sliding Glass Corner Meet DoorSeries SGD780 Pocket Panel Configurations and Size Chart
4P4T
1 POCKET
3P3T
1 POCKET
2P2T
1 POCKET
3 347/16 357/8 745/16
4 467/16 517/8 985/16
1P2T
1 POCKET
TrackLength
FinishedOpening
PocketDepth
SizeWidth
TYPE
All doors viewed from the outside.* Sizes do not include corner formula add-on.
10 1111/2 337/8 1451/4
12 1351/2 397/8 1751/4
16 1831/2 517/8 2351/4
7'6" 8313/16 337/8 11711/16
9 10113/16 397/8 14111/16
12 13713/16 517/8 18911/16
5 561/8 337/8 90
6 681/8 397/8 108
8 921/8 517/8 144
Series SGD780
June 2011 276-
Aluminum Sliding Glass Corner Meet DoorSeries SGD780
NOTES AND ADDITIONAL PRICING
Panels and Frame1. Pricing corner doors - select two doors, total the base price and options for each and add $600 to get the total combined list price2. Minimum panel size is 28" x 32 5/8"3. Maximum panel size for laminated is 5' x 8' or 4' x 10'4. Maximum size for laminated insulating is 5' x 8' or 4' x 10'5. PVD finish hardware handle set (gold, satin nickel) - add $300 per locking stile
• 2P2T add: $300 for XO or OX configurations or $600 for XX configurations• 2P2T 1P add: $300• 3P3T add: $300 for XXO or OXX configurations or $600 for XXX configurations• 3P3T 1P add: $300• 4P4T add: $300 for XXXO or OXXX configurations or $600 for XXXX configurations• 4P4T 1P add: $300
6. Keylock• Standard handle sets add $25 per keyed lockset• PVD handle sets add $35 per keyed lockset
7. 1 5/8" sill add-on no up charge (does not provide a water design pressure)8. 3 1/2" sill add-on no up charge9. 4 1/2" add-on sill available at $14 list per foot10. 5 1/4" add-on sill available at $16 list per foot11. Custom sizes and counter top units use next largest size plus 25%12. 4" bottom rail standard, 9" bottom rail optional with no up charge13. Premium frame colors are Arizona Beige, Pebble Khaki, Venetian Bronze, Clear Anodize, and Eterna® Finish
Glass14. Laminated insulating glass make-up:
3/16" tempered monolithic - air – 3/16" heat strength - .090 interlayer – 3/16" heat strength15. Options specific to insulating glass:
• Low-E options:• LWE (hard coat) - add Low-E up charge to LIG option price• LEH (soft coat) - add Low-E up charge to base price• L7 (soft coat) - add Low-E up charge plus 10% to base price• Argon gas – add $7 list per glass lite (XX unit = 2 lites)• Double tints are not available on LIG
16. White interlayer is not available with SGP interlayer17. SGP interlayer is standard above a nominal 4' x 8' panel
Colonial Muntins18. Custom colonial configurations – add 20% colonial up charge19. Double ogee colonial: raised ogee muntin outside and raised ogee muntin inside20. Simulated divided lite: colonial insulated internal grids between glass with double ogee colonial
• add double ogee colonial price and colonial insulated21. Premium frame color with CIG, use colonial insulating glass column22. Brittany style colonial priced same as standard colonial
Miscellaneous23. Nylon tandem rollers optional at no extra charge (not available on lami IG over a 4' x 8' panel)24. Standard hardware (white or black) included in base price
ETERNA® Finish
25. Finishes available: Acacia, Cherry, Dark Oak, Dark Walnut26. Muntin options are double applied ogee: ogee inside and outside and colonial insulating
• grids between glass on colonial insulating will be bronze finish27. Color restoration system is available. Two paint shade pens per stain color
June 2011286-
6'8" Pocket
Available in White & Bronze
6'8" By-Pass
Always check with your local building officials for compliance requirements.
Sizes do not include corner formula add-on, see page 6-23.
List Price SERIES SGD780
Aluminum Sliding Glass Corner Meet DoorSeries SGD780
June 2011 296-
Aluminum Sliding Glass Corner Meet DoorSeries SGD780
Available in White & Bronze
8'0" By-Pass
8'0" Pocket
List Price SERIES SGD780
Always check with your local building officials for compliance requirements.
Sizes do not include corner formula add-on, see page 6-23.
June 2011306-
Aluminum Sliding Glass Corner Meet DoorSeries SGD780
9'0" By-Pass
9'0" Pocket
List Price SERIES SGD780
Always check with your local building officials for compliance requirements.
Sizes do not include corner formula add-on, see page 6-23.
Available in White & Bronze
June 2011 316-
Aluminum Sliding Glass Corner Meet DoorSeries SGD780
10'0" Pocket
Always check with your local building officials for compliance requirements.
Sizes do not include corner formula add-on, see page 6-23.
List Price SERIES SGD78010'0" By-Pass
Available in White & Bronze