02 02 sectioning a crown model
Post on 19-May-2015
131 Views
Preview:
TRANSCRIPT
Week 2 Session 2Sectioning a Fixed Prosthodontics Model
6ADT4305
Draw clear construction lines to aid in your cutting
Practice on your plaster cube first
Use SLOW cuts withgentle pressure.
Let the blade do the work
Cut right through the horseshoe
then extend the cut 3mm into the
model base
You now have a removable ‘die’
The die requires trimming to remove
the square edges and to permit easy
removal
TRIM VERY CAREFULLY.
DON’T TRIM OVER THE PREPARATION
MARGIN.
top related