10,000 industrial odor control industrielle …...industrial odor control industrielle...
Post on 23-Aug-2020
14 Views
Preview:
TRANSCRIPT
Industrial Odor Control
Industrielle Geruchsbeseitigung
Désodorisation Industriel
™
Odor
(ou/
m3 )
Energy (kW)
20,000
10,000
2,0000
0
182-32900 South Fraser Way, PO Box 15010, Vancouver - Abbotsford (BC) V2S 8P1 CanadaTel: (+1) 604-854-5628 Fax: (+1) 604-854-5620 info@uniqair.com
www.uniqair.com
ALL INFORMATION IN THIS BROCHURE CAN BE SUBJECT TO CHANGE WITHOUT NOTICE
Odor-isometric of 1 ou/m3 (=DT)
Dilution versus Distance to Stack (example)
30,000
20,000
10,000
2,0000
0 1000 2000 3000 5000
Distance to Stack (m)
Energy (kW)
Stack concentrations (example): A = untreated 20,000 ou/m3 (= DT) B = treated 90% effi ciency 2,000 ou/m3 (= DT)
Detection ThresholdA (= 4000 m) UntreatedB (= 500 m) Treated effi ciency 90%
Odor reduction = f (energy)
Odor Control in 3 Steps:1) Pilot test to determine odor reduction as a function of energy.
2) Calculate Stack Dilution. Emission parameters: airfl ow, temperature, etc.
3) Dispersion modelling: determining Odor-isometrics before and after treatment.
© 2011 Uniqair Technologies Ltd. All Rights Reserved. Rev. 06/17/11
A
A
B B
1 2
3
Dilu
tio
n
Od
or
(ou/
m3 )
Plasma-Injector Pilot Unit
From Stack Control Box
Optional catalyst for higher conc. VOC’s
Plasma-Injector
Blower
500 4000
20,000
10,000
2,0000
0
PilotPlasma-Injector
Catalyst(Optional)
From Process
Stack
Oxidation
Example
Modular Cabinet & Plasma Reactor Systems
Industrielle Geruchsbeseitigung
Die Geruchsbeseitgung erfolgt beim
Plasma-Injector auf der Grundlage einer
Hochgeschwindigkeits-oxidation.
Die oxidierten Moleküle können mit dem
Geruchssinn nicht erfasst werden und sind
für die Umgebung nicht weiter störend.
Das Plasma-Injector System besteht
aus einem SS304-Gehäuse mit
Plasma Reaktoren. Die Raumluft wird
abgestrahlt, wodurch Sauerstoff- und
Wasserdampfmoleküle dissoziiert
werden. Diese Wandlung ist der erster
Schritt im Prozess, in dem ein extrem
reaktives Gas gebildet wird, das eine
Mischung aus instabilen Sauerstoff-
atomen, lonen, Radikale, etc. mit erhöhten
Elektronenenergie-werten enthält. Dieses
Gas – oft als “Aktiv-sauerstoff” bezeichnet
– ist in der Lage, in hoher Geschwindigkeit
einen Oxidations-prozess an Geruchs-
komponenten durchzuführen, nachdem
es zuvor in die verschmutze Luft injiziert
wurde. Die Geruchsmoleküle lösen sich
und sind anschliessend vom menschlichen
Geruchssinn nicht mehr wahrnehmbar.
Desodorisation Industriel
La désodorisation par le
Plasma-Injector est basée sur
l’oxydation a grande vitesse. Les
molécules oxydées ne peuvent pas être
détectées de façon organoleptique et
ne dérangent donc pas l’observateur.
Le système Plasma-Injector se
compose d’une armoire SS304 avec
reacteurs de plasma. L’air ambient est
irradié, provocant une séparation des
molécules d’oxygène et de vapeur
d’eau. Cette transition constitue la
première étape d’un processus à la
fi n duquel un gaz extrêmement réactif
est formé, comprenant un mélange
d’atomes d’oxygène instables, d’ions,
de radicaux, etc., avec des niveaux
élevés d’énergie électronique. Ce
gaz, souvent nommé “oxygène actif”,
est capable d’exécuter un processus
d’oxydation à grande vitesse sur les
composants odorants après l’injection
de l’air pollué. Les molécules odorants
perdront alors la faculté d’exciter les
sens olfactifs de l’homme.
Benefi ts:
• High odor removal effi ciency
• No mechanical wear
• No supply of chemicals,
biomaterial etc.
• No waste at all
• Low costs
• Compact
• No impact from process fl uctuations
like dust, temperature, humidity etc.
• No impact on the production
process
• Almost no maintenance required
• Low energy consumption
• Simple operation (only on/off)
• Modular design
Vorteile:
• Hohe Geruchsbeseitigungs-effi zienz
• Kein mechanischer Verschleiss
• Keine Chemikalien, Biomaterial etc.,
erforderlich
• Keinen Rückstände
• Niedrige Betriebskosten
• Kompaktbauweise
• Keinen Auswirkungen von
Prozessfl uktuationen wie Staub,
Temperatur, Luftfeuchtigkeit etc.
• Keine Beeinfl ussung des
Produktionprozesses
• Nahezu wartungsfrei
• Geringer Energieverbrauch
• Einfache Bedienung (Nur Ein/Aus)
• Modulkonzept
Avantages:
• Elimination hautement effi cace
• Pas d’usure mécanique
• Pas d’emploi des produits
chimiques, ni d’eau etc.
• Aucun gaspillage
• Coûts réduits
• Compact
• Pas d’infl uence des fl uctuations de
processus telles que la poussière, la
température, l’humidité etc.
• Pas d’infl uence sur le processus de
production.
• Ne requiert pratiquement aucun
entretien
• Faible consommation d’énergie
• Fonctionnnement simple (seulement
marche/arrêt)
• Concept modulaire
Industrial Odor Control
Deodorisation by the Plasma-
Injector is based on high speed
oxidation. The oxidized molecules
cannot be detected organoleptically,
hence they do not bother the observer.
The Plasma-Injector system consists of
a SS304 cabinet with Plasma Reactors.
Ambient air is radiated and, as a result,
the oxygen and water vapour molecules
are dissociated.
This transition is the fi rst step in a
process where eventually an extremely
reactive gas is formed comprising a
mixture of instable oxygen atoms, ions,
radicals etc., with elevated electron
energy levels.
This gas, often called ’active oxygen’,
has the ability to execute a high
speed oxidation process with the
odor components after injection in the
polluted air.
The odor molecules will lose the faculty
of exciting man’s sense of smell.
ambient air
10% ambient air
Plasma-Injector
Ambient airActivated oxygen
STACK
fastoxidation
+ =
+ =
Mounting Flange Plasma Reactors Plasma Module
+ =
+ =
Plasma Module Cabinet Plasma-InjectorH x W x L = 0.70 x 0.70 x 0.84 meter (28 x 28 x 33 inch)
Odor
(ou/
m3 )
Energy (kW)
IN
0
Composting
Fish Feed
Waste Water Treatment Plant
OUT
Plasma-Injector
Catalyst(Optional)
process
particle-fi lter
blower
Oxidation
Example
Modular Cabinet & Plasma Reactor Systems
Industrielle Geruchsbeseitigung
Die Geruchsbeseitgung erfolgt beim
Plasma-Injector auf der Grundlage einer
Hochgeschwindigkeits-oxidation.
Die oxidierten Moleküle können mit dem
Geruchssinn nicht erfasst werden und sind
für die Umgebung nicht weiter störend.
Das Plasma-Injector System besteht
aus einem SS304-Gehäuse mit
Plasma Reaktoren. Die Raumluft wird
abgestrahlt, wodurch Sauerstoff- und
Wasserdampfmoleküle dissoziiert
werden. Diese Wandlung ist der erster
Schritt im Prozess, in dem ein extrem
reaktives Gas gebildet wird, das eine
Mischung aus instabilen Sauerstoff-
atomen, lonen, Radikale, etc. mit erhöhten
Elektronenenergie-werten enthält. Dieses
Gas – oft als “Aktiv-sauerstoff” bezeichnet
– ist in der Lage, in hoher Geschwindigkeit
einen Oxidations-prozess an Geruchs-
komponenten durchzuführen, nachdem
es zuvor in die verschmutze Luft injiziert
wurde. Die Geruchsmoleküle lösen sich
und sind anschliessend vom menschlichen
Geruchssinn nicht mehr wahrnehmbar.
Desodorisation Industriel
La désodorisation par le
Plasma-Injector est basée sur
l’oxydation a grande vitesse. Les
molécules oxydées ne peuvent pas être
détectées de façon organoleptique et
ne dérangent donc pas l’observateur.
Le système Plasma-Injector se
compose d’une armoire SS304 avec
reacteurs de plasma. L’air ambient est
irradié, provocant une séparation des
molécules d’oxygène et de vapeur
d’eau. Cette transition constitue la
première étape d’un processus à la
fi n duquel un gaz extrêmement réactif
est formé, comprenant un mélange
d’atomes d’oxygène instables, d’ions,
de radicaux, etc., avec des niveaux
élevés d’énergie électronique. Ce
gaz, souvent nommé “oxygène actif”,
est capable d’exécuter un processus
d’oxydation à grande vitesse sur les
composants odorants après l’injection
de l’air pollué. Les molécules odorants
perdront alors la faculté d’exciter les
sens olfactifs de l’homme.
Benefi ts:
• High odor removal effi ciency
• No mechanical wear
• No supply of chemicals,
biomaterial etc.
• No waste at all
• Low costs
• Compact
• No impact from process fl uctuations
like dust, temperature, humidity etc.
• No impact on the production
process
• Almost no maintenance required
• Low energy consumption
• Simple operation (only on/off)
• Modular design
Vorteile:
• Hohe Geruchsbeseitigungs-effi zienz
• Kein mechanischer Verschleiss
• Keine Chemikalien, Biomaterial etc.,
erforderlich
• Keinen Rückstände
• Niedrige Betriebskosten
• Kompaktbauweise
• Keinen Auswirkungen von
Prozessfl uktuationen wie Staub,
Temperatur, Luftfeuchtigkeit etc.
• Keine Beeinfl ussung des
Produktionprozesses
• Nahezu wartungsfrei
• Geringer Energieverbrauch
• Einfache Bedienung (Nur Ein/Aus)
• Modulkonzept
Avantages:
• Elimination hautement effi cace
• Pas d’usure mécanique
• Pas d’emploi des produits
chimiques, ni d’eau etc.
• Aucun gaspillage
• Coûts réduits
• Compact
• Pas d’infl uence des fl uctuations de
processus telles que la poussière, la
température, l’humidité etc.
• Pas d’infl uence sur le processus de
production.
• Ne requiert pratiquement aucun
entretien
• Faible consommation d’énergie
• Fonctionnnement simple (seulement
marche/arrêt)
• Concept modulaire
Industrial Odor Control
Deodorisation by the Plasma-
Injector is based on high speed
oxidation. The oxidized molecules
cannot be detected organoleptically,
hence they do not bother the observer.
The Plasma-Injector system consists of
a SS304 cabinet with Plasma Reactors.
Ambient air is radiated and, as a result,
the oxygen and water vapour molecules
are dissociated.
This transition is the fi rst step in a
process where eventually an extremely
reactive gas is formed comprising a
mixture of instable oxygen atoms, ions,
radicals etc., with elevated electron
energy levels.
This gas, often called ’active oxygen’,
has the ability to execute a high
speed oxidation process with the
odor components after injection in the
polluted air.
The odor molecules will lose the faculty
of exciting man’s sense of smell.
ambient air
10% ambient air
Plasma-Injector
Ambient airActivated oxygen
STACK
fastoxidation
+ =
+ =
Mounting Flange Plasma Reactors Plasma Module
+ =
+ =
Plasma Module Cabinet Plasma-InjectorH x W x L = 0.70 x 0.70 x 0.84 meter (28 x 28 x 33 inch)
Odor
(ou/
m3 )
Energy (kW)
IN
0
Composting
Fish Feed
Waste Water Treatment Plant
OUT
Plasma-Injector
Catalyst(Optional)
process
particle-fi lter
blower
Industrial Odor Control
Industrielle Geruchsbeseitigung
Désodorisation Industriel
™Od
or (o
u/m
3 )
Energy (kW)
20,000
10,000
2,0000
0
182-32900 South Fraser Way, PO Box 15010, Vancouver - Abbotsford (BC) V2S 8P1 CanadaTel: (+1) 604-854-5628 Fax: (+1) 604-854-5620 info@uniqair.com
www.uniqair.com
ALL INFORMATION IN THIS BROCHURE CAN BE SUBJECT TO CHANGE WITHOUT NOTICE
Odor-isometric of 1 ou/m3 (=DT)
Dilution versus Distance to Stack (example)
30,000
20,000
10,000
2,0000
0 1000 2000 3000 5000
Distance to Stack (m)
Energy (kW)
Stack concentrations (example): A = untreated 20,000 ou/m3 (= DT) B = treated 90% effi ciency 2,000 ou/m3 (= DT)
Detection ThresholdA (= 4000 m) UntreatedB (= 500 m) Treated effi ciency 90%
Odor reduction = f (energy)
Odor Control in 3 Steps:1) Pilot test to determine odor reduction as a function of energy.
2) Calculate Stack Dilution. Emission parameters: airfl ow, temperature, etc.
3) Dispersion modelling: determining Odor-isometrics before and after treatment.
© 2011 Uniqair Technologies Ltd. All Rights Reserved. Rev. 06/17/11
A
A
B B
1 2
3
Dilu
tio
n
Od
or
(ou/
m3 )
Plasma-Injector Pilot Unit
From Stack Control Box
Optional catalyst for higher conc. VOC’s
Plasma-Injector
Blower
500 4000
20,000
10,000
2,0000
0
PilotPlasma-Injector
Catalyst(Optional)
From Process
Stack
top related