1/6 common cavities and tooling re 18325-70/10 - bosch...

1/6

Common cavities and tooling

2-way

3-way / 3-way short

4-way

RE 18325-70/10.12Replaces: RE 18325-70/07.12

Summary

Description Page

Common cavity 2-way

CA-08A-2N 2CA-10A-2N 2CA-12A-2N 2CA-16A-2N 2CA-20A-2N 2Tools 2

Common cavity 3-way short

CA-08A-3C 3CA-10A-3C 3CA-12A-3C 3CA-16A-3C 3CA-20A-3C 3Tools 3

Description Page

Common cavity 3-way

CA-08A-3N 4CA-10A-3N 4CA-12A-3N 4CA-16A-3N 4CA-20A-3N 4Tools 4

Common cavity 4-way

CA-08A-4N 5CA-10A-4N 5CA-12A-4N 5CA-16A-4N 5CA-20A-4N 5Tools 5

RE 18325-70/10.122/6 Bosch Rexroth Oil Control S.p.A.

Common cavities - Tools2-way 1 mm = 0.03937 in

1 in = 25.4 mm

RE 18325-70/10.12 Bosch Rexroth Oil Control S.p.A. 3/6

tools only suitable for small series production.

Common cavities - Tools3-way short 1 mm = 0.03937 in

1 in = 25.4 mm

RE 18325-70/10.124/6 Bosch Rexroth Oil Control S.p.A.

Common cavities - Tools3-way 1 mm = 0.03937 in

1 in = 25.4 mm

RE 18325-70/10.12 Bosch Rexroth Oil Control S.p.A. 5/6

Common cavities - Tools4-way 1 mm = 0.03937 in

1 in = 25.4 mm

RE 18325-70/10.126/6 Bosch Rexroth Oil Control S.p.A.

Bosch Rexroth Oil Control S.p.A.Via Leonardo da Vinci 5P.O. Box no. 541015 Nonantola – Modena, Italy Tel. +39 059 887 611 Fax +39 059 547 848cartridges@oilcontrol.comwww.boschrexroth.com

© This document, as well as the data, specifications and other information set forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a.. It may not be reproduced or given to third parties without its consent.

The data specified above only serve to describe the product. No statements concerning a certain condition or suitability for a certain application can be derived from our information. The information given does not release the user from the obligation of own judgment and verification. It must be remembered that our products are subject to a natural process of wear and aging.

Subject to change.