3udfwlfhv 6wuxfwxudo - xa.yimg.com · pdf file6wuxfwxudo pip stf05501 fixed ladders and cages...

COMPLETE REVISIONOctober 2012

PIP STF05501Fixed Ladders and Cages Fabrication Details

PUBLISHING HISTORY November 1994 Issued December 1999 Revision August 2000 Technical Correction February 2002 Technical Correction October 2012 Complete Revision

COMPLETE REVISION October 2012

Process Industry Practices Page 1 of 4

PIP STF05501Fixed Ladders and Cages Fabrication Details

Table of Contents

1. Introduction ................................. 2

2. References ..................................2

3. Definitions ...................................2

4. Requirements ..............................3

Drawings

PIP STF05501 COMPLETE REVISION Fixed Ladders and Cages Fabrication Details October 2012

Process Industry Practices Page 2 of 4

1. Introduction

1.1 Purpose

1.2 Scope

2. References

2.1 Process Industry Practices (PIP) Concrete Typical DetailsStructural and Miscellaneous Steel Fabrication Specification

2.2 Industry Codes and Standards

Standard Specification for Carbon Structural SteelStandard Specification for Carbon Steel Bolts and Studs, 60,000 psi

Tensile Strength2.3 Government Regulations

Regulations 29 CFR 1910 Subpart D (Walking-Working Surfaces)

3. Definitions

contract documents:

design drawings:

engineer of record:

PIP STF05501 COMPLETE REVISION Fixed Ladders and Cages Fabrication Details October 2012

Process Industry Practices Page 3 of 4

ladder fabricator:

owner:

purchaser:

structure/platform engineer:

structure/platform fabricator:

vessel engineer:

vessel manufacturer:

4. Requirements

PIP STS05120PIP STF05501-01 PIP STF05501-11

PIP STF05501-03

PIP STF05501 COMPLETE REVISION Fixed Ladders and Cages Fabrication Details October 2012

Process Industry Practices Page 4 of 4

PIP STF05501-03

PIP STF05501-02 PIP STF05501-03

ASTM A36/A36M

PIP STF05501-01

PIP STS05120

OSHA Regulations 29 CFR 1910 Subpart D

ASTM A307PIP STS05120