60007 seat guardian · user manual 60007 keep these instructions for future reference as they...

User Manual

60007

Keep these instructions for future reference as they contain important information.

Adult installation required. Accessories not included.

Seat Guardian™

1 2

Instructions

Installation:

1. Unbuckle head restraint strap at top of back panel.

2. Place Seat Guardian™ in center of desired seating location. (Fig. A)

3. If vehicle is equipped with a head restraint in desired seating location, attach head

restraint strap around vehicle head restraint and adjust strap length to position

back panel of Seat Guardian™ at desired/proper height. (Fig. B)

NOTE: For intallations in vehicles without a head restraint, the back panel may

need to be folded to prevent the back panel from falling over. (Fig. C)

Removal:1. Remove child safety seat.

2. Unbuckle head restraint strap and remove Seat Guardian™ from vehicle.

3. Store in a cool, dry place.

Care: Surface Wash.

(Fig. A) (Fig. B) (Fig. C)

IMPORTANT NOTE: Always install the child safety seat in accordance to the child safety seat manufacturer’s

installation instructions. Adjust positon of Seat Guardian™ as needed to center child safety seat on Seat Guardian™.

Questions?Retain this address for future reference.

USA©2012 BRICA, Inc., 500 West 5th Street,

Suite 220, Charlotte, NC 282021.866.869.8257 • brica.com

Australia CNP Brands, PO Box 8 Deer Park VIC 3023

1 300 667 137 • cnpbrands.com.auPrinted in China

making together better®