a full range of repair services upgrades and more · • floway • union • united • fairbanks...

Bender provides complete pump repair service on all makes and models including: API 610, ANSI B 73.1, Vertical, In-Line,Multi-Stage, Vertical Turbine, Centrifugal Pumps, Progressive cavity, Reciprocating, Rotary, and more. No matter the model,manufacturer or age of your centrifugal pump, IPMR can have you back up and running quickly and reliably. Best of all,Bender’s workmanship is 100% guaranteed according to industry standards.

A Full Range of Repair Services

Pump Repair Services Include:• Removal of from jobsite (if required) • On-site troubleshooting • Complete disassembly and inspection

including non-destructive testing and precise measuring

• Sandblasting and thorough cleaning of allcentrifugal pump component parts

• Mechanical repairs/parts replacement • Pump parts fabrication (as required) • Reassembly • Performance testing • Reverse engineering• Delivery & re-installation • Pump shaft alignments

Pump Repair Procedure:• Match mark mating components,

and take pictures • Inspect for improper clearances,

corrosion, erosion, flow issues, cavitation, damage

• Clean and NDT parts as needed• Take measurement and runouts• Determine upgrades and repairs • Balance rotating element to 4w/n• Assemble pump, paint and tag

Pump Manufacturers Include:• Flowserve• Sulzer• EBARA• ITT Goulds• Floway• Union• United• Fairbanks Morse• Patterson• Worthington

We have the capability to support all the modifications and improvements you need, with huge in-shop capacity, technical expert-ise in thermal spray, machining, grinding, and replacement parts fabrication and refurbishment. In addition, we can machine largedischarge heads. A partial list of these clients is shown below.

Discharge Head Clients:• CA Department of Water Resources• Bureau of Reclamation• San Luis Delta Mendota Water Authority• USACE• EBMUD• Pacific Gas & Electric• Valero• Conoco Phillips• Exxon-Mobile• Shell• Tesoro• Dow Chemical

Modifications/Improvements:• Conversion to mechanical seals

from packing• Installation of labyrinth seals and

bearing isolators• Change in metallurgy (Nitronics, 17-4, etc)• Bearing upgrade (Vespel, Thordon, etc.)• Wear-resistant coatings• Epoxy coatings

In-Shop Capacity:• 40 ton lifting capacity• Machining up to 17 feet in dia.

up to 30+ feet in length• OD and ID grinding for precision• 100,000 sq. ft. shop

Thermal Spray Services:• Shaft refurbishment • Ceramic coating for bearing areas• Chrome replacement coatings• In-house babbitt bearing refurbishment• Hardfacing for extreme

service environments

General Services:• Routine maintenance onsite• Troubleshooting• Replacement parts• Installation and removal• Regrouting• Rebuild service

Upgrades and More

• Dresser• KSB• Bingham• Byron Jackson• Layne• Peerless• Westinghouse• Pacific• Deleval• Moyno