alpolic & alpolic/fr · alpolic ® & alpolic ®/fr clean rooms ... astm d257 conductive -

ALPOLIC® & ALPOLIC®/fr

clean rooms

For the building, reconfiguring, or upgrading of cleanrooms and related applications, ALPOLIC® & ALPOLIC®/fr simply can’t

be beat. Available with either fr or standard PE core, ALPOLIC® & ALPOLIC®/fr's flat, clean, non-porous and non-shedding

surface, along with its traditional advantages of high strength to weight ratio, solid durability, and ease of fabrication and

installation make it a very cost-effective material for these highly specialized applications. ALPOLIC® & ALPOLIC®/fr panels

have attracted the positive attention of semiconductor, pharmaceutical, and biotech companies for use in mini-environ-

ments, cleanroom enclosures, cleanroom walls, ceilings, and more. ALPOLIC® & ALPOLIC®/fr panels can be integrated with

framing members, profiles, and accessories supplied by cleanroom manufacturers. ALPOLIC® & ALPOLIC®/fr collaborates

with these high quality firms to provide a complete solution to your specific needs.

S U R FA C E R E S I S T I V I T Y U S I N G A S T M D 2 5 7Conductive - <105 ohmsStatic Dissipative - 105 and 109 ohmsNonconductive - >109 ohms

T O L E R A N C E SWidth: ± 0.08" (± 2mm)Length: ± 0.16" (± 4mm)Thickness:3mm & 4mm: ± 0.008" (± 0.2mm)6mm: ± 0.012" (± 0.3mm)Bow: Maximum 0.5% of length and/or widthSquareness: Maximum 0.2" (5mm)

ALPOLIC® & ALPOLIC®/fr is supplied with factory-cut edges. The panels will not delaminate or release contaminants when cut at the project site.

C O AT I N G P E R F O R M A N C EPropertyCross Cut AdhesionImpact ResistanceFlexibilityTaber AbrasionPencil Hardness

With an emphasis on dependable quality, iden-

tification of field requirements, exceptional value

and customer support, ALPOLIC® & ALPOLIC®/fr is

the perfect material for cleanroom construction.

C H E M I C A L R E S I S TA N C E

ALPOLIC® & ALPOLIC®/fr finishes have resisted attack when tested using the following protocol:Sulfuric Acid @ 50% for 24 hoursNitric Acid @ 50% for 5 hoursHydrochloric Acid @ 32% for 5 hoursAmmonium Hydroxide @ 30% for 24 hoursSodium Hydroxide @ 50% for 24 hoursHydrogen Peroxide @ 33% for 8 hoursAcetone @ 100% for 24 hoursXylene @ 100% for 24 hours

B O N D I N T E G R I T Y

Vertical Pull (C297)Drum Peel (D1781)Flatwise Shear (C273)

ASTMD3359D2794D522D4060D3363

RequirementNo pick-off30 in-lb2T<5.0 mgF/H

Unit

psiin-lb/inpsi

3mm(0.118")190633.61259

4mm(0.157")180633.61225

6mm(0.236")166433.61195

G E N E R A L I N F O R M AT I O N

clean rooms ALPOLIC®/fr PANEL FOR USE AS A CLEANROOM MATERIAL HAS BEEN SPECIFICATION

TESTED IN ACCORDANCE WITH FM APPROVALS TEST STANDARD 4910.

E N G I N E E R I N G P R O P E R T I E S

Aluminum ThicknessSpecific GravityWeightCoefficient of ExpansionThermal ConductanceTensile Yield StrengthTensile StrengthElongationFlexural ElasticityFlexural StiffnessPunching Shear Resistance Maximum Load Shear ResistanceDeflection TemperatureSound Transmission

Unitin–lbs/ft2

in/in/˚FBTU/ft2 hr ˚Fpsipsi%psipsi

lbspsi˚FSTC#

ASTM–––D696C976E8E8E8D790C393

D732D732D648E413

3mm.0201.520.9313 x 10-6

12.298321874712.17.11 x 106

1.04 x 109

18474950231.825

4mm.0201.381.1213 x 10-6

10.756429691313.55.77 x 106

1.99 x 109

19204025231.826

6mm.0201.231.5013 x 10-6

8.534466497817.34.22 x 106

4.98 x 109

21212816231.826

ALPOLIC®/fr Characteristics

CountryUnited KingdomUSA

China

Test StandardBS476, Part6BS476, Part7ASTM E84

Fire Resistance Rating TestsASTM E119Interior Room Corner TestISO9705, UBC26-3Non-toxicity testsNew York State Uniform FirePrevention and Building CodeGB8625, GB8626, & GB8627

Results & ClassificationClass 0Class 1ClearedFlame Spread Index <25Smoke Developed Value <80One-hour Fire-RatingTwo-hour Fire-RatingCleared

Cleared

Cleared B1

F I R E P E R F O R M A N C E

S U R FA C E F I N I S H E SFluorocarbon finishes provide superior smoothness and surface integrity.

ALPOLIC®/fr - FC: Fluorocarbon conductiveALPOLIC®/fr - FN: Fluorocarbon nonconductive

E N G I N E E R I N G P R O P E R T I E S

Aluminum ThicknessSpecific GravityWeightCoefficient of ExpansionTensile Yield StrengthTensile StrengthElongationFlexural ElasticityFlexural StiffnessPunching Shear Resistance Maximum Load Shear ResistanceDeflection Temperature

Unitin–

lbs/ft2

in/in/˚Fpsipsi

%psipsi

lbspsi

˚F

ASTM–––

D696E8E8E8C393

C393

D732D732D648

4mm.0201.901.5613 x 10-6

634471265.05.77 x 106

1.93 x 109

22594637241.8

6mm.0201.812.2313 x 10-6

384042662.04.22 x 106

4.98 x 109

––

228.8

ALPOLIC® PE CharacteristicsS U R FA C E F I N I S H E SFluorocarbon finishes provide superior smoothness and surface integrity.

ALPOLIC® - FC: Fluorocarbon conductiveALPOLIC® - FN: Fluorocarbon nonconductive

F I R E P E R F O R M A N C ETest MethodASTM E-84: Flame Spread Smoke DevelopedASTM E108 (Modified)ASTM D635 (Rate of Burning)ASTM D1929

ASTM E162 (Flame Spread Index)UL-94Modified UBC42-2

Thickness

3/6mm3/6mm4/6mm4mm4mm

6mm3mm3mm

Result

5/015/10PassCC1Flash: 716˚FIgnition: 752˚F11V-O RatingPass

LITAP1020 Rev. 1