behringer xenyx 1002usb vesa mount - prusaprinters · 2020. 7. 23. · vesa (10x10) mount/stand for...

7.56 hrs

1 pcs

f

0.20 mm

k

0.40 mm

h

1

111.00 g

d

CrealityEnder-3

Print Files (.gcode) DOWNLOAD ALL FILES

Summary

Vesa (10x10) mount/stand for Xenyx USB audio mixer.

Modelled in Onshape. Curvature of bottom part made from sketch.

Link to onshape model attached.

Gadgets > Audio

xenyx vesa stand mount behringer

Lay flat, print without supports, ~15% infill.

I've printed it with 0.2mm layer and 0.4mm nozzle.

wociscz

Behringer Xenyx1002USB vesamount

VIEW IN BROWSER

updated 23. 7. 2020 | published 23. 7. 2020

4.4 MB

7.56 hrs f 0.20 mm k 0.40 mm h PLA 111.40 g

updated 23. 7. 2020

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

8.8 MBupdated 23. 7. 2020

Find source .stl files on Thingiverse.com

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution—Noncommercial—Share Alike

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition

xenyx_vesa_mount.gcode

xenyx_vesa_mount.stl