conec rj45 magnetic modular jack (rj45 mm-jack) rj45 magnetic modular jack (rj45 mm-jack)...

Post on 05-May-2018

226 Views

Category:

Documents

4 Downloads

Preview:

Click to see full reader

TRANSCRIPT

CONEC RJ45 Magnetic Modular Jack (RJ45 MM-Jack) RJ45SJS11AN010X

Page 1 of 2 Updated Aug. 08, 2005

Features

Integrated 10/100 Base-Tx Magnetic Module in MC210 circuit Integrated a 1000pF/2kv high DWV capacitor, 4 x 75Ω terminal resistors and LEDs Provide excellent EMI and common mode noise suppression; deliver enhanced filtering performance Fully compliant IEEE 802.3 and ANSI X3.263 Standards including Min. 350µH OCL (Open Circuit

Inductance) with 8mA DC bias and 1500Vrms isolation requirement Magnetic Circuit: MC210 (with LEDs)

RJ45RJ-5

RJ-4

RJ-2

RJ-1

Rx (1:1)

P8

P6

P7

P5

P2

P4

P3

P1

Tx (1:1)

L2

L1Green

LED

YellowL4

L3

LED

RJ-6

RJ-8

RJ-7

1000pF/2kv

75Ω

RJ-3

Electrical Specification @ 25oC; Operating Temperature: -40oC to +85oC

Insertion Loss

(dB Max.)

Return Loss

(dB Min.)

NEXT (Near End Cross Talk)

(dB Min.)

Differential to Common Mode

Rejection (dB Min.)

CMRR (Common Mode Rejection Ratio)

(dB Min.)

Hi-Pot

0.1 - 100 MHz

0.1 - 30 MHz

60 MHz

80 MHz

0.1 - 30 MHz

60 MHz

100 MHz

60 MHz

100 MHz

60 MHz

100 MHz

1500V (rms)

1.0 20.0 15.0 12.0 50.0 40.0 35.0 40.0 35.0 35.0 30.0 60 sec. • OCL (Open Circuit Inductance): Min. 350µH @ 8mA DC bias (-40oC to +85oC) • Leakage Inductance: Max. 0.35µH • Inter-winding capacitance: Max. 25pF • DC-Resistance: Max. 1.0Ω • Turns Ratio Tx/Rx =1:1/1:1 ± 3% • Rise Time & Fall Time: 3.0ns (Typical)

CONEC RJ45 Magnetic Modular Jack (RJ45 MM-Jack) RJ45SJS11AN010X

Page 2 of 2 Updated Aug. 08, 2005

Standard LED

Color Wavelength Forward Voltage with IF=20mA

Reverse Voltage with IR=10uA

Luminous Intensity with IF=20mA

Green 565nm 2.6V (MAX) 2.1V (TYP) 5.0V (TYP) 20mcd (MIN) 30mcd (TYP)

Yellow 585nm 2.6V (MAX) 2.0V (TYP) 5.0V (TYP) 15mcd (MIN) 25mcd (TYP)

Dimensions and Recommended PCB Layout

P1

L3 L4 L2 L1

Recommended PCB Layout

Top of PCB with Bottom of Opening

Recommended Panel Opening

NOTES:- Dimensions in millimeter- Tolerance ±0.10 unless specified

top related