cruch glasses

CRUNCH GLASS

OPTOM FASLU MUHAMMED

PTOSIS CRUTCH

THE CRUTCH IS THE FORMED WIRE MOUNTED TO THE UPPER RIMS OF THE GLASS

Ptosis spectacles are equipped with a crutch that is positioned behind and roughly parallel to the upper eye wire.

The crutch supports the skin of the upper lid & prevents the lid from drooping closed.

Metal frames can be fitted as ptosis spectacles. (using flexible wire as a mock-up to show the basic shape, then constructed from the model).

The crutch is formed to the shape & contour of the eye, using a type of stainless steel wire.

The new ptosis crutch helps those with “droopy eye lids” function normally…… this life style changing appliance allows droopy eyelids to stay focus & opened, yet still allowing flexibility for blinking

Crutches are made & distributed exclusively through ; eyeglass repair for soldering & repair or more.

We customize every pair ptosis crutches are coated stainless steel wire formed to contour the individuals need.

Opticians measures each individual to enable the eyelids to remain open in a relaxed state , enabling the individual to close the lid when needed : there by , allowing the user to.

MEASURMENTS FOR CRUTCH GLASS

#. With the glass being worn in a normal comfortable position .

#. The measurements are taken from the most inner part of the eye lid right on top Just below the skull bone , right up against top of the socket ,at the center of the top of the eye ball.

#. The inner upper wire of the eye glass frames closest to the eye .

#. Center on each eye b/w the bridge in the middle & the temple mount.

The frame should be made of metal ,not plastic if possible ,once the crutch is attached apply the outer protective coating,& give a final adjustment..Basically that is how it is done