daniel_shin_local_area_network.ppt

Local Area Network

Daniel ShinCS 147, Section 3November 18, 2008

What Is a LAN?

A LAN is a high-speed data network that covers a small geographic area.

It typically connects workstations, personal computers, printers, servers, and other devices.

Characteristics

High data-transfer rates. Small geographic range. Lack of a need for leased telecommunication

lines.

Advantages

LANs offer computer users many advantages. Shared access to devices and applications. File exchange between connected users. Communication between users via electronic

mail and other applications.

First Commercial LAN

The first commercial installation of a LAN was in December 1977 at Chase Manhattan Bank in New York.

It was not an Ethernet network, but a network called ARC (Attached Resource Computer or ARCnet).

ARCnet

It was developed by Datapoint Corporation in 1976 and announced in 1977.

ARCnet was the first widely available networking system for microcomputers.

It became popular in the 1980s for office automation tasks.

It is said to have since gained interest in the embedded systems market, where certain features of the protocol are especially useful.

Ethernet

Ethernet was developed at Xerox Corp.'s Palo Alto Research Center (PARC) in the early 1970s.

The original network speed was just under 3Mbit/sec.

Token Ring

Token Ring uses a special three-byte frame called a token that travels around the ring.

Resides at the data link layer (DLL) of the OSI model.

Fiber Distributed Data Interface (FDDI)

FDDI provides a standard for data transmission in a LAN that can extend in range up to 124 miles.

FDDI uses a dual-attached, counter-rotating token ring topology.

LAN Protocols and the OSI Reference Model

LAN Media-Access Methods

Ethernet uses carrier sense multiple access collision detect (CSMA/CD).

Each network station listens before and after transmitting data.

If a collision is detected, both stations wait a random time before trying to resend.

LAN Media-Access Methods (cont.)

Token Ring passes a special type of packet called a token around the network.

If a network device has data to send, it must wait until it has the token to send it.

After the data has been sent, the token is released back on the network.

LAN Transmission Methods

LAN data transmissions fall into three classifications: unicast, multicast, and broadcast.

In each type of transmission, a single packet is sent to one or more nodes.

LAN Transmission Methods (cont.)

In a unicast transmission, a single packet is sent from the source to a destination on a network.

A multicast transmission consists of a single data packet that is copied and sent to a specific subset of nodes on the network.

A broadcast transmission consists of a single data packet that is copied and sent to all nodes on the network.

LAN Topologies

LAN topologies define how network devices are organized.

Four common LAN topologies are: bus, ring, star, and tree.

LAN Topologies (cont.)

A bus topology is a linear LAN architecture.

Transmissions from network stations create the length of the medium and are received by all other stations.

LAN Topologies (cont.)

A ring topology is a LAN architecture that consists of a series of devices connected to one another by unidirectional transmission links to form a single closed loop.

LAN Topologies (cont.)

A tree topology is a LAN architecture that is identical to the bus topology.

Except, branches with multiple nodes are possible.

LAN Devices

A repeater connects two network segments.

It is a physical layer device used to interconnect the media segments of an extended network.

LAN Devices (cont.)

Multiple LAN extenders can connect to the host router through a WAN.

It is a remote-access multilayer switch that connects to a host router.

LAN Devices (cont.)

A hub is a physical layer device that connects multiple user stations, each via a dedicated cable.

Hubs are used to create a physical star network while maintaining the logical bus or ring configuration of the LAN.