date project ir tpe - coronet leddate project ir tpe coronet, inc. 5 s l totow nj 12 t 73 34 660 f...
Post on 04-Jul-2020
10 Views
Preview:
TRANSCRIPT
DATE PROJECT FIRM TYPE
CORONET, Inc.55 Shepherds LaneTotowa, NJ 07512
T 973 345 7660F 973 345 8705
WWW.CORONETLED.COMCORONET, Inc. reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance. 1/4
Updated: 04/7/2020
THE JOINT™ - UPDN
Shown with ‘X’ joints, 90° corner joints, and elevation connections.
Grid pattern joint system
DATE PROJECT FIRM TYPE
CORONET, Inc.55 Shepherds LaneTotowa, NJ 07512
T 973 345 7660F 973 345 8705
WWW.CORONETLED.COMCORONET, Inc. reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance. 2/4
Updated: 04/7/2020
Linear luminaire designed to connect with modular system using connectors..
FEATURES
• Available In Made To Measure Lengths Specifiable In 4’’ Increments• 100% Downlight• CRI 90+ Standard; R9>50 • 5 Year, 50,000 Hour Fixture Warranty• 2700K, 3000K, 3500K & 4000K Color Temperatures Available• Available with PoE
Offices, Lobbies, Retail Stores, Classrooms, Reception Areas & Corridors
LED SYSTEM INFORMATION
ORDERING
EXTRUSION DIMENSIONS
APPLICATIONS
1 - FIXTURE ID
JNT UPDN LIN
2 - LENGTH
2 - 2 ft4 - 4 ft8 - 8 ftX’-X” - Specify Length (Straight Joint provided on runs over 8ft in length)
CONSTRUCTION OPTICS
WARRANTY FINISH5 Year Limited Warranty (Covers Standard Components) Standard Powder-Coated White. Custom RAL Colors Available
Extruded Aluminum Housing with Die Cast Ends. Formed Steel Gear Tray
Extruded High Transmission Satin Acrylic Lens with No LED Imaging
Union Made ETL Listed
Made In The USA Damp Location Rated
Remote Driver with 0-10V Dimming Standard. Several Driver Options Available.
FIXTURE RATINGS & CERTIFICATIONS
ELECTRICAL
DRIVERS & SENSORS
For Wiring Diagrams and Sensor Information Click Here
1.75”
0.875”
THE JOINT™ - UPDN LINEAR
*Drawing required upon ordering
Based on a 3500K luminaire using one driver. Custom outputs available; specify below.
NominalSystem Watts
NominalDelivered Lumens
DIRECT INDIRECT DIRECT INDIRECT
Standard (LTG1) 5.25 W/ft 5.25 W/ft 315 lm/ft 510 lm/ft
Low (LTG2) 3.5 W/ft 3.5 W/ft 212 lm/ft 340 lm/ft
High (LTG3) 7.5 W/ft 7.5 W/ft 400 lm/ft 670 lm/ft
5 - VOLTAGE
UNV - Universal (120/277V)
6 - DRIVER
DB - Standard Dimming (0-10V)DB1% - 1% Dimming (0-10V)DB.1% - 0.1% Dimming (0-10V)LTEA - Lutron 2-wire 1% Dimming (120V only)LDE1 - Lutron Digital EcoSystemLDE5 - 5 Series EcoSystem; 5% DimmingPoE - Power over Ethernet. Consult
Factory for Compatibility
3 - COLOR TEMP
27 - 2700K/90 CRI30 - 3000K/90 CRI35 - 3500K/90 CRI40 - 4000K/90 CRI
4 - LED SYSTEM
IN- INDIRECT LTG1 - Standard LTG2 - Low LTG3 - High LTGC - Custom Output
D - DIRECT LTG1 - Standard LTG2 - Low LTG3 - High LTGC - Custom Output
7 - FINISH
W - White (Standard)BLK* - BlackCC* - Custom Color (provide RAL#)
*White cord and canopy provided. Must specify for other requests.
8 - MOUNTING
AC - Air Craft Cable (50”)
9 - OTHER OPTIONS
DC - Dual Circuit (Seperate Up/Dn Control)EM 120V - Emergency PackEM 277V - Emergency PackEMCKT - Emergency Circuit
1 2 3 4-INDIRECT 4-DIRECT 5 6 7 8 9
IN - D -
DATE PROJECT FIRM TYPE
CORONET, Inc.55 Shepherds LaneTotowa, NJ 07512
T 973 345 7660F 973 345 8705
WWW.CORONETLED.COMCORONET, Inc. reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance. 3/4
Updated: 04/7/2020
Architectural luminaire with direct and indirect lighting using a specially designed reflector optic to shield and control beam spread designed to connect with modular system using connectors..
FEATURES
• Available In Made To Measure Lengths Specifiable In 4’’ Increments• 100% Downlight• CRI 90+ Standard; R9>50 • 5 Year, 50,000 Hour Fixture Warranty• 2700K, 3000K, 3500K & 4000K Color Temperatures Available• Available with PoE
Offices, Lobbies, Retail Stores, Classrooms, Reception Areas & Corridors
LED SYSTEM INFORMATION
ORDERING
EXTRUSION DIMENSIONS
APPLICATIONS
1 - FIXTURE ID
JNT SHARP UPDN LIN
2 - LENGTH
2 - 2 ft4 - 4 ft8 - 8 ftX’-X” - Specify Length (Straight Joint provided on runs over 8ft in length)
CONSTRUCTION OPTICS
WARRANTY FINISH5 Year Limited Warranty (Covers Standard Components) Standard Powder-Coated White. Custom RAL Colors Available
Extruded Aluminum Housing with Die Cast Ends. Specially Designed Louver Available in A Wide or Narrow Beam Configuration
Union Made ETL Listed
Made In The USA Damp Location Rated
Remote Driver with 0-10V Dimming Standard. Several Driver Options Available.
FIXTURE RATINGS & CERTIFICATIONS
ELECTRICAL
DRIVERS & SENSORS
For Wiring Diagrams and Sensor Information Click Here
THE JOINT™ - SHARP UPDN LINEAR
*Drawing required upon ordering
5 - VOLTAGE
UNV - Universal (120/277V)
6 - DRIVER
DB - Standard Dimming (0-10V)DB1% - 1% Dimming (0-10V)DB.1% - 0.1% Dimming (0-10V)LTEA - Lutron 2-wire 1% Dimming (120V only)LDE1 - Lutron Digital EcoSystemLDE5 - 5 Series EcoSystem; 5% DimmingPoE - Power over Ethernet. Consult
Factory for Compatibility
3 - COLOR TEMP
27 - 2700K/90 CRI30 - 3000K/90 CRI35 - 3500K/90 CRI40 - 4000K/90 CRI
4 - LED SYSTEM
IN- INDIRECT LTG1 - Standard LTG2 - Low LTG3 - High LTGC - Custom Output
D - DIRECT LTG1 - Standard LTG2 - Low LTG3 - High LTGC - Custom Output
7 - FINISH
W - White (Standard)BLK* - BlackCC* - Custom Color (provide RAL#)
*White cord and canopy provided. Must specify for other requests.
8 - MOUNTING
AC - Air Craft Cable (50”)
9 - OTHER OPTIONS
DC - Dual Circuit (Seperate Up/Dn Control)EM 120V - Emergency PackEM 277V - Emergency PackEMCKT - Emergency Circuit
1 2 3 4-INDIRECT 4-DIRECT 5 6 7 8 9
IN - D -
NominalSystem Watts
NominalDelivered Lumens
DIRECT INDIRECT DIRECT INDIRECT
Standard (LTG1) 5.25 W/ft 5.25 W/ft 475 lm/ft 600 lm/ft
Low (LTG2) 3.5 W/ft 3.5 W/ft 350 lm/ft 400 lm/ft
High (LTG3) 7.25 W/ft 7.25 W/ft 720 lm/ft 775 lm/ft
Based on a 3500K luminaire using one driver and BWW option. Custom outputs available; specify below.
1.75”
0.875”
BAFFLE NARROW
1.75”
0.875”
BAFFLE WIDE
DATE PROJECT FIRM TYPE
CORONET, Inc.55 Shepherds LaneTotowa, NJ 07512
T 973 345 7660F 973 345 8705
WWW.CORONETLED.COMCORONET, Inc. reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance. 4/4
Updated: 04/7/2020
FEATURES
• Several Connections Types/Directions Offered• Available in Custom Colors• 30° Elevation Connections
ORDERING
1 2 3
1 - FIXTURE ID
JNT CNCT
2 - Connector
90° -90° Corner Joint120° -120° Corner JointY -120° ‘Y’ JointX - ‘X’ JointT - ‘T’ JointD30° -30° Down ExtenderU30° - 30° Up Extender
3- FINISH
W - White (Standard)BLK - BlackCC - Custom Color (provide RAL#)
DIMENSIONS:
120° Joint
90° Joint
120° ‘Y’ Joint
‘T’ JointStraight JointEnd Joint
90° ‘X’ Joint
THE JOINT™ - UPDN CONNECTOR
Straight Elevation Joint‘X’ Elevation Joint
Joint + Extender Examples:
*Drawing required upon ordering
30° Down Extender*
*To be used in addition to joint
30° Up- Extender*
*To be used in addition to joint
1.835
30°
30°
2.0
1.4
top related