date project ir tpe - coronet led › wp-content › uploads › 2020 › 02 › spec... ·...
TRANSCRIPT
DATE PROJECT FIRM TYPE
CORONET, Inc.55 Shepherds LaneTotowa, NJ 07512
T 973 345 7660F 973 345 8705
WWW.CORONETLED.COMCORONET, Inc. reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance. 1/4
Updated: 04/7/2020
THE JOINT™
Shown with ‘X’ joints, 90° corner joints, and elevation connections.
Grid pattern joint system
DATE PROJECT FIRM TYPE
CORONET, Inc.55 Shepherds LaneTotowa, NJ 07512
T 973 345 7660F 973 345 8705
WWW.CORONETLED.COMCORONET, Inc. reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance. 2/4
Updated: 04/7/2020
Linear luminaire designed to connect with modular system using connectors..
FEATURES
• Available In Made To Measure Lengths Specifiable In 4’’ Increments• 100% Downlight• CRI 90+ Standard; R9>50 • 5 Year, 50,000 Hour Fixture Warranty• 2700K, 3000K, 3500K & 4000K Color Temperatures Available• Available with PoE
Offices, Lobbies, Retail Stores, Classrooms, Reception Areas & Corridors
LED SYSTEM INFORMATION
Based on a 3500K luminaire using one driver. Custom outputs available; specify below.
NominalSystem Watts
NominalDelivered Lumens
Standard (LTG1) 5.25 W/ft 315 lm/ft
Low (LTG2) 3.5 W/ft 210 lm/ft
High (LTG3) 7.25 W/ft 400 lm/ft
ORDERING
EXTRUSION DIMENSIONS
APPLICATIONS
1 2 3 4 5 6 7 8 9
3 - COLOR TEMP
27 - 2700K/90 CRI30 - 3000K/90 CRI35 - 3500K/90 CRI40 - 4000K/90 CRI
4 - LED SYSTEM
LTG1 - StandardLTG2 - LowLTG3 - HighLTGC - Custom Output
5 - VOLTAGE
UNV - Universal (120/277V)
6 - DRIVER (Remote)
DB - Standard Dimming (0-10V)DB1% - 1% Dimming (0-10V)DB.1% - 0.1% Dimming (0-10V)LTEA - Lutron 2-wire 1% Dimming (120V only)LDE1 - Lutron Digital EcoSystemLDE5 - 5 Series EcoSystem; 5% DimmingPoE - Power over Ethernet. Consult Factory
for Compatibility
1 - FIXTURE ID
JNT LIN
2 - LENGTH
2 - 2 ft4 - 4 ft8 - 8 ftX’-X” - Specify Length (Straight Joint provided on runs over 8ft in length)
7 - FINISH
W - White (Standard)BLK* - BlackCC* - Custom Color (provide RAL#)
*White cord and canopy provided. Must specify for other requests.
8 - MOUNTING
AC - Air Craft Cable (50”)
9 - OTHER OPTIONS
EM 120V - Emergency PackEM 277V - Emergency PackEMCKT - Emergency Circuit
CONSTRUCTION OPTICS
WARRANTY FINISH5 Year Limited Warranty (Covers Standard Components) Standard Powder-Coated White. Custom RAL Colors Available
Extruded Aluminum Housing with Die Cast Ends. Formed Steel Gear Tray
Extruded High Transmission Satin Acrylic Lens with No LED Imaging
Union Made ETL Listed
Made In The USA Damp Location Rated
Remote Driver with 0-10V Dimming Standard. Several Driver Options Available.
FIXTURE RATINGS & CERTIFICATIONS
ELECTRICAL
DRIVERS & SENSORS
For Wiring Diagrams and Sensor Information Click Here
1.75”
0.875”
THE JOINT™ - LINEAR
*Drawing required upon ordering
DATE PROJECT FIRM TYPE
CORONET, Inc.55 Shepherds LaneTotowa, NJ 07512
T 973 345 7660F 973 345 8705
WWW.CORONETLED.COMCORONET, Inc. reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance. 3/4
Updated: 04/7/2020
Linear luminaire designed to connect with modular system using connectors and a specially designed reflector optic to shield and control beam spread.
FEATURES
• Available In Made To Measure Lengths Specifiable In 4’’ Increments• 100% Downlight• CRI 90+ Standard; R9>50 • 5 Year, 50,000 Hour Fixture Warranty• 2700K, 3000K, 3500K & 4000K Color Temperatures Available• Available with PoE
Offices, Lobbies, Retail Stores, Classrooms, Reception Areas & Corridors
LED SYSTEM INFORMATION
ORDERING
EXTRUSION DIMENSIONS
APPLICATIONS
1 2 3 4 5 6 7 8 9 10
CONSTRUCTION OPTICS
WARRANTY FINISH5 Year Limited Warranty (Covers Standard Components) Standard Powder-Coated White. Custom RAL Colors Available
Extruded Aluminum Housing with Die Cast Ends. Specially Designed Louver Available in A Wide or Narrow Beam Configuration
Union Made ETL Listed
Made In The USA Damp Location Rated
Remote Driver with 0-10V Dimming Standard. Several Driver Options Available.
FIXTURE RATINGS & CERTIFICATIONS
ELECTRICAL
DRIVERS & SENSORS
For Wiring Diagrams and Sensor Information Click Here
THE JOINT™ - LINEAR SHARP
Based on a 3500K luminaire using one driver and BWW option. Custom outputs available; specify below.
NominalSystem Watts
NominalDelivered Lumens
Standard (LTG1) 5.25 W/ft 475 lm/ft
Low (LTG2) 3.5 W/ft 350 lm/ft
High (LTG3) 7.25 W/ft 720 lm/ft
3 - COLOR TEMP
27 - 2700K/90 CRI30 - 3000K/90 CRI35 - 3500K/90 CRI40 - 4000K/90 CRI
4 - LED SYSTEM
LTG1 - StandardLTG2 - LowLTG3 - HighLTGC - Custom Output
5 - VOLTAGE
UNV - Universal (120/277V)
6 - DRIVER
DB - Standard Dimming (0-10V)DB1% - 1% Dimming (0-10V)DB.1% - 0.1% Dimming (0-10V)LTEA - Lutron 2-wire 1% Dimming (120V only)LDE1 - Lutron Digital EcoSystemLDE5 - 5 Series EcoSystem; 5% DimmingPoE - Power over Ethernet. Consult Factory
for Compatibility
1 - FIXTURE ID
JNT LIN SHARP
2 - LENGTH
2 - 2 ft4 - 4 ft8 - 8 ftX’-X” - Specify Length (4’’ Increments)
7 - FINISH
W - White (Standard)BLK* - BlackCC* - Custom Color (provide RAL#)
*White cord and canopy provided. Must specify for other requests.
8 - MOUNTING
AC - Air Craft Cable (50”)
9 - BEAM SPREAD
BNB - Baffle Narrow - Black (36° Beam Spread)BWB - Baffle Wide - Black (62° Beam Spread)BNW - Baffle Narrow - White (40° Beam Spread)BWW - Baffle Wide - White (65° Beam Spread)
10 - OTHER OPTIONS
EM 120V - Emergency PackEM 277V - Emergency PackEMCKT - Emergency Circuit
1.75”
0.875”
BAFFLE NARROW
1.75”
0.875”
BAFFLE WIDE
DATE PROJECT FIRM TYPE
CORONET, Inc.55 Shepherds LaneTotowa, NJ 07512
T 973 345 7660F 973 345 8705
WWW.CORONETLED.COMCORONET, Inc. reserves the right to make any design changes for continuous improvement which will not affect the overall appearance or performance. 4/4
Updated: 04/7/2020
FEATURES
• Several Connections Types/Directions Offered• Available in Custom Colors• 30° Elevation Connections
ORDERING
1 2 3
1 - FIXTURE ID
JNT CNCT
2 - Connector
90° -90° Corner Joint120° -120° Corner JointY -120° ‘Y’ JointX - ‘X’ JointT - ‘T’ JointD30° -30° Down ExtenderU30° - 30° Up Extender
3- FINISH
W - White (Standard)BLK - BlackCC - Custom Color (provide RAL#)
DIMENSIONS:
120° Joint
90° Joint
120° ‘Y’ Joint
‘T’ JointStraight JointEnd Joint
90° ‘X’ Joint
THE JOINT™ - CONNECTOR
Straight Elevation Joint‘X’ Elevation Joint
Joint + Extender Examples:
*Drawing required upon ordering
30° Down Extender*
*To be used in addition to joint
30° Up- Extender*
*To be used in addition to joint
1.835
30°
30°
2.0
1.4