eccomas 2012eccomas.cimne.com/.../img/mdia/eccomas-2012-e-book... · eccomas 2012 e-book | iv!...
Post on 10-Apr-2018
221 Views
Preview:
TRANSCRIPT
ECCOMAS 2012
European Congress on Computational Methods in
Applied Sciences and Engineering
e-bookFull Papers
September 10-14, 2012
Vienna, Austria
© Vienna University of TechnologyInstitute for Mechanics of Materials and StructuresInstitute of Lightweight Design and Structural Biomechanics
© photocredits Gustav Klimt, the Kiss: Belvedere, Vienna (www.belvedere.at); Secession: WienBild
ISBN: 978-3-9503537-0-9
ECCOMAS 2012 e-book containing all full papers submitted to the ECCOMAS 2012 Congress (6th European Congress on Computational Methods in Applied Sciences and Engineering), September 10-14, 2012, Vienna, Austria
Editors:Josef Eberhardsteiner, Helmut J. Böhm, Franz G. Rammerstorfer
ECCOMAS 2012 e-book | I
Table of Contents Enhanced formula for a critical velocity of a uniformly moving load Z. Dimitrovová
1
Microscopic model for simulation of traffic flows on multilane highways and crossroads N. Churbanova, A.A. Chechina, I.R. Furmanov, M.A. Trapeznikova
11
Structure-preserving time integrators for thermo-elasticity with heat conduction P.L. Mata, A.J. Lew
18
Analysis of vibro-based isolated building D. Makovicka, D. Makovicka
38
Comparison of some reduction bases approaches for non-linear structural dynamic systems under different excitations F.A. Lülf, D.M. Tran, R. Ohayon
47
Increasing of aerodynamical performances of flying configurations,via global shape optimization A. Nastase
64
Robust vibration control of flexible structures using smart materials with uncertainties K. Zhang, M. Ichchou, G. Scorletti, F. Mieyeville
75
Causality, “superluminality,” and reshaping in undersized waveguides D. Sokolovski , E. Akhmatskaya
93
Simulation of specimen-geometry effect on ceramics strength by randomly distributed damage approach T. Hoshide, H. Sugiyama
104
Analysis of relative slip on press-fitted contact surface between wheel and axle H. Kawashima
116
A finite volume Lagrangian cell centered mimetic approach for computing elasto-plastic deformation of solids in general unstructured grids S.K. Sambasivan, R. Loubere, M. Shashkov
125
Shape optimization of thermoelastic fields for mean compliance minimization E. Katamine, H. Yoshioka
143
Multi-objective optimization of cyclone geometry based on CFD simulations using the desirability function and genetic algorithms K. Elsayed, C. Lacor
155
Study of the effect of mechanical loading on cell cultures in bone tissue engineering M. Cruel, M. Bensidhoum, L. Sudre, G. Puel, T. Hoc
175
On the performance of a parallel direct solver used within a hybrid spectral/finite element solver for incompressible flows X. Dechamps, G. Degrez, M. Rasquin
184
An efficient implementation of simulating annealing in GPUs and its application to calibration of SABR stochastic volatility model A.M. Ferreiro, J.A. García, J.G. López-Salas, C. Vazquez
198
A comprehensive image processing methodology for automatically detecting shield tunnel defects Q. Ai, Y. Yuan
208
Optimization of a Krueger device for a regional aircraft wing configuration D. de Rosa, G. Andreutti, D. Quagliarella
219
Prediction of particle distribution on wall in magnetic separation T. Inaba, T. Sakazume, Y. Yamashita, S. Matsuoka
230
Thermodynamic model for strain-induced crystallization in rubber L. Thien-Nga, J. Guilie, P. Le Tallec
237
Asymptotics of electron flow spin-polarization in quantum waveguides of variable cross-section in presence of magnetic field L.M. Baskin, P. Neittaanmäki, O. Sarafanov
253
Finite element based trajectory planning for distributed-parameter thermal systems T. Meurer
263
ECCOMAS 2012 e-book | II
Geometrical and thermal characterization of silica aerogel using classical molecular dynamics J.J. Yeo, T.Y. Ng, Z.S. Liu
277
Description of deformation process due to heat transfer in a two-phase polycrystalline composite structure T. Sadowski, P. Golewski
286
Computational mechanics of knitted structures - critical overview Y.K. Kyosev, W. Renkens
296
Computational modeling of high speed RTM of automotive part involving on-line mixing of highly reactive two-component resin system C. Binetruy, M. Deleglise, S. Comas-Cardona, S.G. Advani
304
Second order linearization effects based on the matrix stiffness A.M. Wahrhaftig, J.A.L. Rocha, R. Brasil
316
Flow over periodic hills - test case for ERCOFTAC knowledge base wiki M. Breuer, C. Rapp, M. Manhart
325
Fluid-structure interaction in turbulent flows: LES predictions and PIV measurements G. De Nayer, M. Breuer, A. Kalmbach
344
Parallel potts model simulation of nanocrystalline grain growth S. Schäfer, D. Zöllner
364
On the motion of continua with non-material boundary conditions - an investigation with one-dimensional examples A. Franze, B.W. Zastrau
375
Numerical modelling of viscoplastic free surface flows in complex 3D geometries K. Nikitin, M. Olshanskii, K. Terehov, Y. Vassilevski
388
Coupling numerical simulations of mold filling processes with numerical simulations on bubble scale for polyurethane foams S.G. Geier, F.W. Bartels, M. Piesche
402
Exact evaluation of singular and near-singular integrals in Galerkin BEM M. Lenoir, N. Salles
413
Nonlinear behavior of thin-layered structures under contact and friction A. Dorninger, E. Karer, J. Gerstmayr
432
Multi-objective optimization for an air pollution problem L.J. Alvarez-Vazquez, N. Garcia-Chan, A. Martinez, M.E. Vazquez-Mendez
448
Comparison of asymptotic and numerical studies of electron flow spin-polarization in quantum waveguide in magnetic field M. Kabardov, P. Neittaanmäki
455
Concurrent multiscale analysis of heterogeneous materials O. Lloberas-Valls, F.P.X. Everdij, D.J. Rixen, A. Simone, L.J. Sluys
467
Remarks on time integration schemes used for high precision control J. Pandtle, R.H. Steinbuch
482
Comparison between CFD and wind tunnel measurements of a roof mounted air ventilated equipment in a high speed train I. Ali, A. Rüter, B. Bahl
490
Numerical investigation of a cavitation phenomenon round a propulsor blade K. Tesch, J.A. Szantyr, P. Flaszynski
498
An approach for modelling the roughness-induced boundary layer transition using transport equations P. Dassler, D. Kožulović, A. Fiala
507
Computational approach to fatigue behaviour of randomly or unidirectional fibre reinforced materials R. Brighenti, A. Carpinteri, D. Scorza
525
Dynamic finite deformation thermo-viscoelasticity using energy-consistent time-integration M. Krüger, M.M. Groß, P. Betsch
536
High-order absorbing boundary conditions and perfectly matched layers for cables and beams laid on elastic supports G. Lancioni
551
Numerical analysis on asymmetrically combined glulam M. Frese, H.J. Blaß
564
ECCOMAS 2012 e-book | III
Hydrodynamic applications using ReALE method T. Harribey, J. Breil, P.-H. Maire, M. Shashkov
574
A method for computing waveguide scattering matrices in the presence of point spectrum B.A. Plamenevskii, O. Sarafanov
588
Topology optimization in fluid dynamics using adjoint-based truncated Newton D.I. Papadimitriou, E.M. Papoutsis-Kiachagias, K. Giannakoglou
597
Locally resolving large scale turbulent structures by a hybrid – Lattice Boltzmann and Finite Volume – turbulence model S. Pirker, C. Goniva, C. Kloss, S. Puttinger, P. Seil, S. Schneiderbauer
611
Stochastic modelling and analysis of porous media using first-order perturbation-based homogenization method K.S. Basaruddin, N. Takano
621
Damage-based crack initiation and propagation H. Minnebo, T. Van Hoof, O. Pierard
631
Transport of pollutant solved by radial basis boundary element method K. Kovarik, J. Muzik, D. Sitanyiová
642
Applying CAD/CAE tools in the roll center determination for a double A automotive suspension G.O. Andrade, M.A.A. Nunes, R.D.C. Silva
653
Minimizing the environmental impact of wastewater discharges with SOS A. Martinez, L.J. Alvarez-Vazquez, N. Garcia-Chan, M.E. Vazquez-Mendez
666
High order stochastic Finite Volume Method for the uncertainty quantification in hyperbolic conservation laws with random initial data and flux coefficients S. Tokareva, S. Mishra, C. Schwab
673
Hybrid RANS/LES, PANS and PRNS computations of plane impinging jets S. Kubacki, J. Rokicki, E. Dick
687
Interaction of flexible multibody dynamics with fluids by means of smoothed particle hydrodynamics M. Schörgenhumer, P.G. Gruber, J. Gerstmayr
703
Numerical flow simulations used in industrial problems K. Adamek, J. Kolar
723
Conservative segregated solution method for turbulence model equations in compressible flows C. Morsbach, F. di Mare
738
Approximation of non-convex anisotropic energies via Willmore energy P. Pozzi, P. Reiter
752
Homogenization and modelling of technical textiles S. Fillep, J. Mergheim, P. Steinmann
769
Inversion of seismic reflection data through focusing W.A. Mulder
781
An improved flexibility-based nonlinear frame element endowed with the fiber-free formulation F. Marmo, L. Rosati
795
Modeling of gas separated flows at inlet of suction channels on the basis of stationary discrete vortices O. Averkova, A. Logachev, I. Logachev, K. Logachev
812
A fully unconstrained interior point algorithm for multivariable state and input constrained optimal control problems P. Malisani, F. Chaplais, N. Petit
832
Graph grammar based parallel direct solver for 1D and 2D isogeometric finite element method M. Paszynski, K. Kuznik, V.M. Calo
849
Finite element modeling of timber-concrete composite beams under short-term loadings N. Khorsandnia, H.R. Valipour, K. Crews
859
2D phase-field analyses of dendrite and axon growth of nerve cell K. Nakagawa, T. Takaki, Y. Morita, E. Nakamachi
868
Simulation of the dynamics of internal combustion engines considering oil film lubricated contacts G. Offner
879
Hierarchy of preconditioning techniques for the solution of the Navier-Stokes equations discretized by 2nd order unstructured finite volume methods S. Langer
895
ECCOMAS 2012 e-book | IV
Crack identification in electromagnetic testing using genetic algorithms based on extended finite edge elements J.-C. Boisson, F. Lefèvre, S. Lohrengel
917
Multi-objective optimization of effective thermo-mechanical properties of metal-ceramic composites M. Kursa, K. Kowalczyk-Gajewska, H. Petryk
936
Stochastic reconstruction of porous media and evaluation of their effective transport properties P. Capek, M. Vesely, V. Hejtmanek, L. Brabec
945
A micro-meso numerical strategy for the simulation of the degradation of laminated composites F. Daghia, P. Ladeveze
961
Approximate feedforward control design for flexible multibody systems using singular perturbed models T. Gorius, R. Seifried, P. Eberhard
972
Numerical modelling and simulation of a 20 mm 54 g FSP impact into a composite – foam – ceramic shield M. Klasztorny, P. Dziewulski, M. Swierczewski, A. Morka
989
Modeling and simulation of inelastic microstructure development and inhomogeneous material behaviour via non-convex rate dependent gradient plasticity B. Klusemann, T. Yalcinkaya, M. Geers, B. Svendsen
1005
Nonlinear piezoelectric model based on switching processes and its finite element formulation M. Kaltenbacher, M. Nicolai, B. Kaltenbacher, A. Schönecker
1016
Numerical simulation of stable fatigue crack growth rate using a cohesive zone model S. Silitonga, J. Maljaars, F. Soetens, H.H. Snijder
1028
On the time-stepping stability of continuous mass-lumped and discontinuous Galerkin finite elements for the 3D acoustic wave equation E. Zhebel, S. Minisini, W.A. Mulder
1041
On Maxwell system in waveguides B.A. Plamenevskii, A. Poretckii
1052
Modeling frictional contact conditions with the penalty method in the extended finite element framework E. Biotteau, J.-P. Ponthot
1063
High-order accurate p-multigrid discontinuous Galerkin solution for complex industrial applications A. Ghidoni, S. Rebay, D. Pasquale
1074
Contribution cancelled 1084 Unsteady simulations of flow and heat transfer in a plane turbulent impinging jet using URANS, DES and LES R. Dutta, A. Dewan, B. Srinivasan
1087
A multi-mesh adaptive scheme for air quality modeling with the finite element method L. Monforte, A. Pérez-Foguet
1100
Boundary conditions for semi-implicit low Mach number flow calculation Y. Moguen, P. Bruel, E. Dick
1116
Strain localization analysis of layered materials with debonding interfaces by a second-order homogenization approach A. Bacigalupo, L. Gambarotta
1136
Comparison of three viscous terms approximations for discontinuous Galerkin method by solving model convection-diffusion problems A.I. Troshin, V.V. Vlasenko, A.V. Wolkov
1154
A novel nodal integral method based solution for buoyancy driven flows N. Kumar, S. Singh, J.B. Doshi
1172
Stress around a center hole in a finite plate subjected to internal pressure by MFS W. Fujisaki, T. Fujisawa
1185
Understanding the drag reduction properties of the flow over k- and d-type rough surfaces A. Alhinai, A. Nowakowski
1192
Numerical formulation of kinematically exact three-dimensional beam based on strain measures P. Cesarek, M. Saje, D. Zupan
1209
Effective drag law for parcel-based approaches - what can we learn from CFD-DEM? S. Radl, M. Girardi, S. Sundaresan
1225
Subcell resolution in uncertainty quantification J.A.S. Witteveen, G. Iaccarino
1240
ECCOMAS 2012 e-book | V
Effects of diffusion limitations on the response of biosensors utilizing parallel substrates conversion V. Ašeris, R. Baronas, J. Kulys
1258
Efficient uncertainty quantification with gradient-enhanced kriging: applications in FSI J.H.S. de Baar, T.P. Scholcz, C.V. Verhoosel, R.P. Dwight, A.H. van Zuijlen, H. Bijl
1268
Accelerating convergence of the CFD linear frequency domain method by a preconditioned linear solver A.J. McCracken, S. Timme, K.J. Badcock
1280
GBT-based buckling mode identification from finite element analysis of thin-walled members M. Nedelcu, N. Chira, A.G. Popa, H.L. Cucu
1291
Analysis of dynamic propagation of brittle failure by PDS-FEM with energy balance consideration M. Kondo, K. Oguni
1305
BEM analysis of a non-homogeneous plane containing multiple defects and swept by SH-waves P.S. Dineva, T. Rangelov, G. Manolis
1320
Three-dimensional simulation of a continuum dislocation dynamics theory S. Wulfinghoff, T. Böhlke
1328
Weighing in motion of railway vehicles: development and comparison of different identification/measurement techniques A. Rindi, L. Pugi, E. Meli
1337
Mechanical behavior of single mineralized collagen fibril using finite element simulation coupled to quasi-brittle damage law A. Barkaoui, A. Bettamer, R. Hambli
1357
Composite finite element simulation of radio frequency ablation and bone elasticity L.O. Schwen, T. Pätz, T. Preusser
1366
A smoothed moving least squares method for the application in porodynamics A. Schönewald, O. von Estorff
1384
Fast convolution quadrature for the wave equation in 3D L. Banjai, M. Kachanovska
1397
Three-dimensional gravity-driven film flow over topography: full Navier-Stokes solutions P.H. Gaskell, H.M. Thompson, S. Veremieiev
1410
Developments in BEM-based finite element methods on polygonal and polyhedral meshes S. Rjasanow, S. Weißer
1421
On theory and computation of gradient-based multifield inelasticity H. Clasen, C.B. Hirschberger
1432
Frequency-domain analysis method of semi-infinite acoustic medium with uniform cross section S. Li
1443
A 3D constitutive wood model using the concepts of continuum damage mechanics C. Sandhaas, J.-W.G. van de Kuilen, H.J. Blass
1451
Sensitivity analysis of transient temperature field in micro-domains with respect to the dual phase lag model parameters E. Majchrzak, B. Mochnacki
1469
Numerical heat transfer - generalization of temporary temperature field correction method B. Mochnacki, E. Majchrzak
1480
Non axisymmetric free vibration analysis of linearly varying thickness shells of revolution by a bi-hierarchical finite element M.N. Ouissi, A. Houmat
1494
High-order algorithm for non-linear dynamics J.E. Laier
1513
A poly-grid SEM approach for wave modeling in complex media G. Seriani, C. Su
1520
High-order numerical methods for underwater acoustic scattering problems T. Lähivaara, T. Huttunen
1528
Optimization of a turbulence model by using data assimilation H. Kato, S. Obayashi
1542
Regularized shallow water equations applied to flows with wet/dry bottom areas O. Bulatov, T. Elizarova, J.-C. Lengrand
1556
ECCOMAS 2012 e-book | VI
Discrete adjoint solvers in industrial design J.-D. Müller, F. Christakopoulos, W. Jahn, S. Xu
1572
Contribution cancelled 1581 Construction of polynomial chaos expansion for uncertain material parameters from limited experimental data K. Sepahvand, S. Marburg
1589
Three fields finite elements for viscoplastic free surface flows and variational data assimilation N. Martin, J. Monnier
1605
A dynamic VMS-LES model and its hybrid extension for the simulation of bluff-body flows C. Moussaed, S. Wornom, B. Koobus, M.V. Salvetti, A. Dervieux
1624
A new approach towards the numerical integration of multibody systems with unilateral constraints B. Esefeld, H. Ulbrich
1644
Particle methods for 3D biological flows with variable density and viscosity R. Chatelin, P. Poncet
1663
The LS-STAG immersed boundary method for non-Newtonian fluids: flow of shear-thinning liquids between eccentric rotating cylinders O. Botella, M. Ait-Messaoud, A. Pertat, C. Rigal, Y. Cheny
1676
The rotational quaternion-based beam FEM formulations E. Zupan, M. Saje, D. Zupan
1690
A Galerkin approach to FFT-based homogenization methods S. Brisard, L. Dormieux
1709
A high-continuity multi-scale static and dynamic modelling of periodic materials A. Bacigalupo, L. Gambarotta
1719
A second order penalized direct forcing for hybrid cartesian/immersed boundary flow simulations C. Introïni, M. Belliard, C. Fournier
1732
Reduction strategies for PDE-constrained optimization problems in haemodynamics G. Rozza, A. Manzoni, F. Negri
1749
Updating the probabilistic density function related to an uncertain parameter of a model for producing voice, using Bayesian approach E. Cataldo, C. Soize, R. Sampaio
1769
A new meshless method applied to the analysis of 3D structures J. Belinha, L.M.J.S. Dinis, R.M. Natal Jorge
1781
Adjoint mesh deformation and adjoint-based sensitivities with respect to boundary values A. Engels-Putzka, C. Frey
1789
Extending moving least squares to mixed variables for metamodel-assisted optimization R. Filomeno Coelho
1809
Partitioned simulation of long and slender cylinders corresponding to nuclear fuel rods vibrating in axial flow J. De Ridder, J. Degroote, K. Van Tichelen, J. Vierendeels
1823
Development and optimization of an innovative joining technique for composite structures using the finite element method H. Lang, A.C. Nogueira, K. Drechsler, E. Hombergsmeier
1833
The analysis of thick plates considering a new meshless method J. Belinha, L.M.J.S. Dinis, R.M. Natal Jorge
1850
Partitioned solution of the unsteady adjoint equations for a strongly coupled fluid-structure interaction problem J. Degroote, M. Hojjat, E. Stavropoulou, R. Wüchner, K.-U. Bletzinger
1858
Optimization of the aluminum and steel telecommunication towers using the generalized perturbation-based stochastic finite element method M. Kaminski, M. Solecka
1876
Adaptive coupling between stochastic and deterministic continuum models in the framework of the Arlequin method C. Zaccardi, L. Chamoin, R. Cottereau, H. Ben-Dhia
1894
Multiharmonic balance analysis of a jointed friction oscillator D. Süß, K. Willner
1907
ECCOMAS 2012 e-book | VII
Estimation of simultaneous leakage flow rates and initial temperature states inside soild dikes through temperature measurements by both deterministic and metaheuristic methods S. Kerzalé, M. Maillet, A. Girard
1915
Error control in reliability analysis of cracked structures L. Gallimard
1927
A quasi brittle damage assesment simulation model of cortical bone specimens under compressive load A. Bettamer, R. Hambli, S. Allaoui, A. Barkaoui, A. El Hraiech, R. Jennane
1933
Simulation of damage in laminates J.L. Curiel Sosa, J.J. Munoz, S.T. Pinho, Q. Li, O.A. Beg
1940
Developement of a contact model for an electric motor lamination stack V. Luchscheider, K. Willner
1947
Development of a wear model for the wheel profile optimization on railway vehicles running on the Italian net M. Ignesti, A. Innocenti, L. Marini, E. Meli, A. Rindi
1956
Efficient usage of multiple NVIDIA GPUs for viscous compressible flows simulation A.A. Davydov, E.V. Shilnikov
1975
An innovative numerical tool to analyze the rolling and sliding friction of viscoelastic materials G. Carbone, C. Putignano
1985
Nonlinear seismic response analysis of piles in nonlinear viscoelastic foundation E.J. Sapountzakis, A.E. Kampitsis
1994
Conquer the terabyte scale: post-processing of high resolution unsteady CFD data for turbomachinery analysis C. Voigt, J. Wellner, C. Morsbach, E. Kügeler
2007
Numerical challenging of capturing membrane action in reinforced concrete beams and one-way slabs N. Farhang Vesali, H.R. Valipour, B. Samali
2020
Wear prediction in the railway field: development of a model for the study of the wheel and rail profile evolution M. Ignesti, L. Marini, E. Meli, A. Rindi
2036
Prediction and analysis of the helicopter rotor performances in hovering flight T. Azzam, T. Belmerabet, M. Mekadem, S. Hanchi
2056
The splitting finite-difference scheme for two-dimensional heat conduction equation with four nonlocal integral conditions S. Sajavicius
2064
Computing reachable sets via barrier methods on SIMD architectures L. Grüne, T. Jahn
2076
Numerical study of non-Newtonian viscoelastic compressible fluid flow in a planar contraction/expansion H.M. Matos, P.J. Oliveira
2096
Computational modeling of self-organization in a liquid phase bacterial bioluminescent biosensor R. Baronas, Ž. Ledas, R. Šimkus
2114
On the effectiveness of the bypass explosion valve Y.H. Polandov, M. Barg, V. Babankov
2123
Stokes-Darcy coupling for layers with high permeability ratio - decoupled approach R. Troian, S. Drapier
2131
Non-symmetric BEM-FEM tearing and interconnecting method L. Rodríguez-Tembleque, J.A. González, R. Abascal, K.-C. Park
2150
Reliability analysis of linear dynamical systems with uncertain structural parameters subject to discrete white noise excitation M. Valdebenito, H. Jensen, G.I. Schuëller, A.A. Labarca
2168
Numerical analysis of frame/shear wall structures of variable cross section and loading W. Savassi, M.R.S. Corrêa
2179
An inverse problem for adhesive contact and non-direct evaluation of material properties F.M. Borodich, B.A. Galanov, S.N. Gorb, M.Y. Prostov, Y.I. Prostov
2191
Numerical investigation of unsteady behavior of laminar separation bubble near stall conditions J.H. Almutairi, I.M. AlQuadi
2205
ECCOMAS 2012 e-book | VIII
The contact material point method and its comparison with the finite element method P. Huang, Z. Hao
2220
Convergence acceleration of the iterative algorithms for the Navier-Stokes equations on structured grids S.I. Martynenko
2228
A fully coupled finite element model for hydro-mechanical behaviour of soft rock J. Ma, N. Khalili
2242
Stochastic interval analysis of natural frequency and mode shape of structures with uncertainties C. Wang, W. Gao, C. Song
2251
Application of the meshless method of fundamental solutions in estimation of hydraulic flow characteristics in the permeable foundation of concrete diversion dam S.A. Lashteh Neshaei, A. Madandoust
2265
A numerical model in precasting segment of an immersed tunnel Y. Luo, Y. Yuan, R. Chai
2272
The extended finite element method applied to 3D free-surface flows H. Sauerland, T.-P. Fries
2285
Linearly implicit energy-conserving Runge-Kutta methods for the incompressible Navier-Stokes equations B. Sanderse, B. Koren
2294
Using of CFD simulations for increasing speed and temperature of flame spray technology T. Zabransky, J. Hamza, J. Kleckova
2307
Numerical analysis of hydrodynamic characteristics of wavy liquid films on rotating disks D. Prieling, H. Steiner, G. Brenn
2317
Conforming finite elements with embedded strong discontinuities D. Dias-da-Costa, J. Alfaiate, L.J. Sluys, P. Areias, C. Fernandes, E. Júlio
2332
Numerical method for the relation between velocity of detonation and curvature of diverging detonation J. Cheng
2345
3D image filtering and segmentation using morphological tools J. Debayle, J.-C. Pinoli
2352
On the application of the discontinuous Galerkin method to turbomachinery flows S. Cherednichenko, C. Frey, G. Ashcroft
2359
Aeroacoustic validation of the Lattice Boltzmann method on non-uniform grids M. Hasert, H. Klimach, J. Bernsdorf, S.P. Roller
2376
Solving linear sparse systems on threedimensional structured grids using matrix-free methods: a comparison A. Keßler, C. Könke
2394
Numerical simulation of a HIL fullscale roller-rig model to reproduce degraded adhesion conditions in railway applications B. Allotta, R. Conti, E. Meli, L. Pugi, A. Ridolfi
2407
Numerical and mathematical approach to the behaviour of the interfaces in the flow through porous media K. Tomoeda
2427
Effect of heterogeneous friction stress on the macroscopic behavior of magnesium single crystal T. Liu, S. Groh
2434
CFD prediction of aerodynamic pressures on silo surfaces to investigate wind induced ovalling vibrations J. Hillewaere, J. Degroote, G. Lombaert, J. Vierendeels, G. Degrande
2443
Construction of D-optimal design of experiments for polynomial chaos expansion S. Zein, B. Colson
2462
Modelization of immersed structures at arbitrary positions in an acoustic fluid using XFEM A. Legay
2475
Particle-turbulence interactions in homogeneous and isotropic turbulence G. Mallouppas, W. George, B. van Wachem
2489
Numerical solution of unsteady p-incompressible Navier-Stokes equationsby the LDG finite element method T. Malkmus, I. Toulopoulos
2505
ECCOMAS 2012 e-book | IX
Aeroacoustic investigation of an airfoil using a mixed finite element scheme A. Hüppe, M. De Gennaro, M. Kaltenbacher, H. Kühnelt
2522
Proximal human femur fracture assessment using isotropic and orthotropic materials: a comparative FE-study using a quasi brittle damage models A. Bettamer, R. Hambli, S. Allaoui, A. Barkaoui, A. El Hraiech, R. Jennane
2539
Asynchronous collision integrator for frictionless impacts S. Wolff, C. Bucher
2548
On the analysis of FGM structures using enhanced finite elements S. Kugler, P. Fotiu, J. Murin
2554
Space-time shear-slip mesh update method for fluid-structure interaction problems H. Schippke, A. Zilian
2574
Thin film flow simulation on a rotating disc P. Vita, B. Gschaider, D. Prieling, H. Steiner
2590
Theoretical modeling and analysis of mode II cracks in compact shear specimens V. Petrova, T. Sadowski
2601
Three-dimensional thin film flow problems solved accurately and efficiently: rivulet formation, merger and evolution P.H. Gaskell, Y.C. Lee, D. Slade, S. Veremieiev
2612
Boundary conditions for the compressible gas flow as a modification of the Riemann problem M. Kyncl, J. Pelant
2625
Numerical simulation of a flow inside an exhaust diffuser J. Simak, J. Pelant
2642
Simulations of large scale three-dimensional sedimentary basin dynamics through domain decomposition techniques A. Cervone, N.A. Fadel, L. Formaggia
2651
Fatigue analysis of tube sheet welds with multi-pass welding lines H. Li, Y. Zheng, L. Li
2664
A finite element approach for the coupled numerical simulation of fluid-structure interaction and mass transfer of moving biofilm structures M. Coroneo, L. Yoshihara, G. Bauer, W.A. Wall
2671
Large scale flow simulation with complex spacer geometry in electrodialysis for sea water desalination K. Masilamani, J. Zudrop, K. Ibrahim, M. Johannink, H. Klimach, J. Bernsdorf, A. Mhamdi, E.M. Fernandez Sanchis, A. Hauser, W. Marquardt, S.P. Roller
2685
A kinetically based algorithm for porous medium flow simulation on multicore computer systems M. Trapeznikova, B. Chetverushkin, N. Churbanova, D. Morozov
2702
Numerical modelling and analysis of the failure behaviour of dowel-type connections in wood B. Franke, S. Franke, P. Quenneville
2709
Investigation of noise radiated by a subsonic jet using a non-conservative implicit large-eddy simulation method C.A.S. Moser, M.F. Medeiros
2720
Modeling of dynamic perfusion test using a two-scale model of tissue parenchyma with layer-wise decomposition E. Rohan, V. Lukes, A. Jonasova
2733
Investigation of stabilized high order schemes for underresolved multi-scale flows A. Beck, T. Bolemann, G. Gassner, C.-D. Munz
2744
Operator splitting methods for pricing American options under jump-diffusion models and stochastic discrete dividends S. Salmi, J. Toivanen
2754
Modelling of contact interface oxidation process at asperity scale J. Maciejewski, M. Białas, Z. Mróz
2766
Unsteady simulation of the flow during the deployment of high-lift systems N. Renard, J. Wild
2774
Generalised implementation of Low-Mach preconditioning for arbitrary three-dimensional geometries J. Fiedler, F. di Mare
2793
ECCOMAS 2012 e-book | X
Thermomechanically consistent material modeling with damage for simultaneous hot/cold forming based on enhanced rheological models C. Bröcker, A. Matzenmiller
2808
3D anisotropic Delaunay meshing for ideal interfacing to block-unstructured mixed meshes using a sparse octree for metric size propagation J. Wild
2828
An analysis of the performance of a high-order stabilised finite element method for simulating compressible flows R. Sevilla, O. Hassan, K. Morgan
2848
Goal oriented error for stochastic plastic finite element problem E. Florentin, B. Blaysat
2854
Computer aided diagnosis of osteoporosis in human pelvic bones A. John, P. Wysota
2860
A Lagrangian meshfree directional difference method for two dimensional compressible flow problem S. Sun, L. Shen
2868
Monolithic approach of Stokes-Darcy coupling for the simulation of liquid infusion process L. Abouorm, S. Drapier, J. Bruchon, N. Moulin
2880
Numerical coupling strategy for evaporating two-phase flow computations: application to solid rocket motors A. Sibra, F. Laurent, A. Murrone, J. Dupays, M. Massot
2893
Efficient topology optimization using local rules of cellular automata B. Bochenek, K. Tajs-Zielinska
2913
Application of an edge-based smoothed finite element method on geometrically non-linear plates of non-linear material R. Frotscher, H.-J. Raatschen, M. Staat
2928
Modeling the behavior of wood with knots at macro-scale level P. Guindos, M. Guaita
2937
Aircraft geometry parameterization with high-end CAD-software for design optimization A. Ronzheimer
2948
High lift devices design of a supersonic transport aircraft based on 3D computational fluid dynamics M. Gaffuri, J. Brezillon
2966
Aeolus purge system conductivity analysis G. Markelov, M. Endemann, D. Wernham
2981
Analysis of a fast iterative method in a dual time algorithm for the Navier-Stokes equations R.C. Swanson, E. Turkel
2993
Inverse problem of fluid temperature estimation inside a flat mini-channel starting from temperature measurements over its external walls Y. Rouizi, D. Maillet, Y. Jannot, I. Perry
3006
Constitutive modelling of damage in adhesively bonded joints for static and cyclic sustained loadings with constant and variable amplitudes A. Matzenmiller, U. Kroll
3020
The use of neural networks with selective actuation neurons for the three-dimensional design optimization of multistage turbomachinery C. Cravero, P. Macelloni, G. Briasco
3031
A multiscale finite element method for transport modeling G. Allaire, S. Desroziers, G. Enchéry, F. Ouaki
3052
Seismic performance of tunes mass dampers with uncertain parameters B. Schmelzer, C. Adam, M. Oberguggenberger
3070
Efficient polar optimization of transport aircraft in transonic RANS flow using adjoint gradient based approach C. Ilic, M. Widhalm, J. Brezillon
3090
Assessment of a fifth-order residual-based compact scheme for steady and unsteady compressible flows K. Grimich, P.-Y. Outtier, P. Cinnella, A. Lerat
3111
Numerical simulation of passive tip-leakage flow control method for axial turbines A. Benoni, R. Willinger
3125
ECCOMAS 2012 e-book | XI
Boundaries for heat transfer deterioration onset in supercritical pressure channel flows A. Urbano, F. Nasuti
3138
A unified approach to build H(div)-reconstructed error estimators on the primal mesh R. Becker, D. Capatina, R. Luce
3158
Restriction matrices for exploiting symmetry in 3D wave propagation analysis by energetic BEM A. Aimi, M. Diligenti, A. Frangi, C. Guardasoni, M. Manzini
3172
New FGM beam finite element for modal analysis of the 2D beam structures J. Murin, M. Aminbaghai, J. Hrabovsky, V. Kutis
3192
A coupled high-resolution fractional-step artificial compressibility and pressure-projection formulation for solving incompressible multi-species variable density flow problem at low Reynolds numbers L. Könözsy, D. Drikakis
3206
Residual based a posteriori error estimates for MITC plate elements L. Beirao da Veiga, J. Niiranen, R. Stenberg
3221
Using a level set to model multiple myeloma induced bone loss B. Ayati, J.M. Graham, S.A. Holstein
3236
Damaging mechanisms and constitutive modeling of metal-matrix composites G. Bolzon, A. Cornaggia
3249
Dynamics of corotational beam elements in large displacements and rotations - some aspects on the kinetic energy and the integration of the equations of motions F. Foti, L. Martinelli
3259
High-order curved mesh generation using linear elasticity Z.Q. Xie, R. Sevilla, O. Hassan, K. Morgan
3273
Multipoint approximations of stochastic elastic boundary value problem for polydisperse composites M. Tashkinov
3279
Evaluation of the CNT agglomeration impact on the mechanical properties of CNT-based polymer composites W. Leclerc, P. Karamian, A. Vivet, A. Campbell
3291
Micro-CT based homogenization of the elastic properties of cortical bone: influence of the heterogeneous distribution of mineral and porosity V. Sansalone, V. Bousson, S. Naili, C. Bergot, F. Peyrin, J.-D. Laredo, G. Haiat
3301
Coupled boundary optimal control problems in thermal fluid dynamics with lifting function approach and Vanka-type solvers G. Bornia, S. Manservisi
3310
Computable bounds of linear functional outputs in linear visco-elastodynamics F. Verdugo, P. Diez
3329
Refined shape memory alloys model taking into account martensite reorientation F. Auricchio, E. Bonetti, G. Scalet, F. Ubertini
3349
Computational methods for Bayesian estimation and control in reliability and maintenance modeling V. Makis, M.J. Kim, C. Lin
3363
Constitutive equations and finite element formulation for anisotropic hyperelastic composites based on constrained Cosserat continuum T. Lasota, J. Burša, S. Fedorova
3379
Distributed octree mesh infrastructure for flow simulations H. Klimach, M. Hasert, J. Zudrop, S.P. Roller
3390
Utilization of neural networks for simulating vehicle induced air velocity in underground tunnels G. Koç, K. Albayrak, C. Sert
3405
Computer simulation of seismic behavior of building structures using SIMULINK of MATLAB B. Blostotsky, E. Efraim
3417
Identification of microscale heat transfer parameters using bioinspired algorithms T.S. Burczynski, J. Dziatkiewicz, W. Kus, E. Majchrzak
3426
A Newton method for fluid-structure interaction using full Jacobians based on automatic form differentiation G. Balaban, A. Logg, M.E. Rognes
3434
Reliability-based characterization of base-isolated structural systems H. Jensen, D. Kusanovic, M. Papadrakakis
3448
ECCOMAS 2012 e-book | XII
Generalized convection-diffusion through the discrete representation of the Lie derivative P.P. Rebelo, A. Palha, M. Gerritsma
3457
Buckling load and displacement variability of cylindrical shells with stochastic material and geometric properties G. Stefanou, V. Papadopoulos, M. Papadrakakis
3477
Molecular dynamics studies of plastic behavior of nanocrystalline aluminum under indentation and tensile loading C.-Y. Wu, Y.-C. Wang
3490
Crystal plasticity finite element simulation of fatigue tests using experimental microstructures imaged by X-ray tomography J. Li, H. Proudhon, S. Forest, A. Roos, W. Ludwig
3498
Numerical recipes for equivalent continuum modeling of jointed systems O. Vorobiev, E. Herbold
3510
An approach for investigating the complexity of an automated draping process using the finite-element method D.F. Liebau, J. van Campen, T. Sommer-Dittrich, N. Dölle, P. Middendorf
3522
Numerical modelling of phase transformation in DP steel after hot rolling and laminar cooling M. Pernach, K. Bzowski, M. Pietrzyk
3541
Determination of the plastic strength of carbonates from microtomography and the upscaling using percolation theory J. Liu, R. Freij-Ayoub, K. Regenauer-Lieb
3550
Warm press forming of magnesium with assist of direct cooling using water and induction heating I. Tanabe
3560
O(n) algorithm for identification of domain isolation by fracture surfaces H. Sumitomo, K. Oguni
3567
On the discretization of spatial metrics satisfying the GCL identities Y. Abe, T. Nonomura, N. Iizuka, K. Fujii
3575
Bayesian uncertainty quantification and propagation in molecular dynamics simulations P. Angelikopoulos, C. Papadimitriou, P. Koumoutsakos
3595
Comparison of algorithms for solving large-scale optimization problems with bound constraints for meteorological data assimilation Y. Horibata
3609
Fluid and motion coupled simulation of descending parachute R. Shibusawa, S. Takahashi, N. Arai
3618
Molecular dynamics simulations on the coherency of Cu precipitates in BCC-Fe D. Molnar, F. Maier, P. Binkele, S. Schmauder
3631
An adaptive NXFEM for the interface problem on locally refined triangular and quadrilateral meshes N. Barrau, R. Becker, E. Dubach, R. Luce
3638
Numerical study on focusing of ultrasounds in microbubble-enhanced high intensity focused ultrasound therapy K. Okita, S. Takagi, Y. Matsumoto
3647
Design and simulation of an autonomous underwater vehicle B. Allotta, R. Costanzi, N. Monni, L. Pugi, A. Ridolfi, G. Vettori
3656
Considering nearest neighbors to identify recrystallizing grains during automated SEM/EBSD data post-processing M. Kühbach, M. Loeck, O. Sukhopar
3674
One-shot optimisation with grid adaptation using adjoint sensitivities A. Jaworski, J.-D. Müller, J. Rokicki
3685
Uncertainty quantification using nonparametric quantile estimation and metamodeling B. Rhein, T. Clees, M. Ruschitzka
3694
Modelling of the bypass-transition in the linear turbine blade cascade P. Straka, J. Příhoda
3711
Modeling of strengthening concrete structures by concrete overlays M. Aschaber, Y. Theiner, G. Hofstetter
3726
ECCOMAS 2012 e-book | XIII
Implicit time advancing applied to shallow water problems coupled with different models of sediment transport H. Guillard, M. Bilanceri, P. Cinat, F. Beux, I. Elmahi, M.V. Salvetti
3736
An integrated approach for image-based computation based on the X-FEM: accuracy and high-order approximation G. Legrain, P. Cartraud, W.-D. Lian
3752
Efficient simulation of viscous flow by means of turbulence regularization modeling and local grid refinement H.J.L. van der Heiden, P. van der Plas, A.E.P. Veldman, R. Luppes, R.W.C.P. Verstappen
3761
Stabilized finite element methods to deal with incompressibility in solid mechanics in finite strains D. Al Akhrass, S. Drapier, J. Bruchon, S. Fayolle
3781
Optimizing of compressed-air consumption in air-jet weaving machines by modeling and simulation of weft insertion C. Sasse, T. Holtermann, M. Stankowski, G. Seide, T. Gries
3794
Solid-state sintering simulation: surface, volume and grain-boundary diffusions D. Pino Muñoz, J. Bruchon, F. Valdivieso, S. Drapier
3803
Time-linearized simulation of unsteady transonic flows with shock-induced separation R. Thormann, J. Nitzsche, M. Widhalm
3817
Simplified hybrid laminar flow control for transport aircraft G.H. Schrauf, H. von Geyr
3831
Refined collapse capacity spectra for predicting seismic collapse of structures vulnerable to the P-delta effect S. Tsantaki, L. Wurzer, C. Jäger, C. Adam, M. Oberguggenberger
3843
Mixed 3D beam models: differential equation derivation and finite element solutions F. Auricchio, G. Balduzzi, C. Lovadina
3860
Special finite-difference methods for extremely anisotropic diffusion B. van Es, B. Koren, H. de Blank
3871
An hp-adaptive level set method for simulating two-component flows in optofluidic devices S. Ronnas, V. Heuveline
3889
An arbitrary Langrangian-Eulerian approach for the numerical simulation of Drosophila flight B. Erzincanli, M. Sahin
3906
Perturbation analysis for the stochastic Darcy problem F. Bonizzoni, F. Nobile
3926
Solid-shell finite element models for explicit simulations of crack propagation in thin structures G. Cocchetti, M. Pagani, U. Perego
3934
Fluid-structure interaction in turbulent flows and the influence of LES subgrid-scale models M. Münsch, A. Delgado, M. Breuer
3944
Application of the metamodel-assisted multi-gradient descent algorithm (MGDA) to air-cooling duct shape optimization A. Zerbinati, J.-A. Desideri, R. Duvigneau
3964
On a consistent, scale-truncation model for large eddy simulation R.W.C.P. Verstappen
3974
Modelling and finite element simulation of the mechanical behaviour of fibrous materials D. Durville, T.D. Vu
3986
Hydrodynamics instability effects in laminar premixed flames S. Schlimpert, D. Hartmann, M. Meinke, W. Schröder, S. Hemchandra
3999
A volume mesh finite element method for PDEs on surface M. Olshanskii, A. Reusken, X. Xu
4016
Boundary element method modelling of nanocomposites J. Ptaszny, G. Dziatkiewicz, P. Fedelinski
4030
Arbitrary-order nodal mimetic discretizations of elliptic problems on polygonal meshes L. Beirao da Veiga, G. Manzini
4041
Compatible NURBS R. Hiemstra, R. Huijsmans, M. Gerritsma
4061
ECCOMAS 2012 e-book | XIV
Interstitial fluid flow within bone canaliculi: numerical assessment of the influence of physical and material parameters V. Sansalone, J. Kaiser, S. Naili, T. Lemaire
4091
An Eulerian Godunov-type scheme for calculation of the elastic-plastic flow equations with moving grids I. Menshov, A. Mischenko, A. Serezhkin
4099
Finite element determination of the lacunar-canalicular permeability of bone, implications in bone S. Lemonnier, S. Naili, T. Lemaire
4119
Inflation of elastic membranes in contact with rigid or deformable surfaces R. Barsotti, S.S. Ligarò
4129
Higher order implicit time integration schemes to solve incompressible Navier-Stokes on co-located grids using consistent unsteady Rhie-Chow V. Kazemi-Kamyab, A.H. van Zuijlen, H. Bijl
4139
GBT-based local and global post-buckling analysis of Roorda’s frame D. Camotim, C. Basaglia
4148
Contribution cancelled 4168 Multi-scale approaches of strain ageing in polycrystalline tantalum D. Colas, E. Finot, S. Flouriot, S. Forest, M. Mazière, T. Paris
4175
Use of computational fluid dynamic to detect pressure loss in a direct ethanol fuel cell P.M. Belchor, M.M. Forte, D. Carpenter, A. Pasqualini, A. Blass
4195
Nonclassical gasdynamics of vapor mixtures E. Casati, E. Rinaldi, A. Guardone, P. Colonna
4201
Towards a European modelling framework analysing coupled physico-chemical processes in porous media for geotechnical applications U.-J. Goerke, W. Wang, O. Kolditz
4212
System identification based on selective sensitivity analysis: a case-study M. Billmaier, C. Bucher
4228
XFEM coupling of granular flows interacting with surrounding fluids F. Pasenow, A. Zilian, D. Dinkler
4248
Influence of discretization and model errors on inverse computational fluid dynamics: application to a water pipe junction J. Waeytens, P. Chatellier, F. Bourquin
4267
ANN-based clinical decision support system for treatment planning of maxillary implant-supported prosthesis F. Jafari, M. Mohammadi-Amin, L. Sedighpour, A. Taheri
4278
Real-time image-based FIT simulation using GPU computing and its application to nondestructive testing K. Nakahata, K. Kimoto
4285
Simulation of materials behavior during in-situ consolidation using continuous welding processes like thermoplastic tape placement R. Schledjewski, M.A. Khan, P. Mitschang
4298
Quadratic least-squares formulation for a local active noise control with stochastic domain and noise source T. Airaksinen, J. Toivanen
4308
Multiscale anisotropic mesh adaptation for a third-order accurate approximation of Euler flow E. Mbinky, F. Alauzet, A. Loseille, A. Dervieux
4318
A 3D shear deformable beam element based on the absolute nodal coordinate formulation applied to classical buckling problems K. Nachbagauer, J. Gerstmayr
4324
Efficient time integration for discontinuous Galerkin method for the unsteady 3D Navier-Stokes equations P. Birken, G. Gassner, M. Haas, C.-D. Munz
4334
Numerical simulation of boundary-layer stabilization using plasma actuators D.G.D.S.D.R. Vieira, A. Duchmann, M. Schäfer, S. Grundmann
4354
A new model and numerical method for compressible two-fluid flow J. Kreeft, B. Koren
4365
ECCOMAS 2012 e-book | XV
Idealized Abdominal Aortic Aneurysm (AAA) geometry as predictor of hemodynamics stresses E. Soudah, G. Villalta, M. Bordone, J.A. Vilalta, F. Nieto, M.Á. Pérez, C. Vaquero
4385
Comparison study of numerical methods of explosion process implementation P. Baranowski, J. Malachowski, L. Mazurkiewicz
4396
Computational model of a direct-fired continuous strip annealing furnace for simulation, control, and optimization S. Strommer, M. Niederer, A. Steinböck, A. Kugi
4407
Source of acoustic waves from a supersonic jet impinging on an inclined flat plate with various plate angle S. Morizawa, T. Nonomura, H. Honda, S. Obayashi, M. Yamamoto, K. Fujii
4425
Linear frequency domain predictions of dynamic derivatives for the DLR F12 wind tunnel model M. Widhalm, A.R. Hübner, R. Thormann
4438
Characterization of clear wood by a single specimen: evaluation of first results and further improvements A. Majano-Majano, J.L. Fernandez-Cabo, J. Xavier
4458
A geometrically exact beam model with nonuniform warping coherently derived from the Saint Venant rod G. Garcea, A. Bilotta, A. Genoese, A. Genoese
4470
Proposal for an advanced wave guide element J. Kreutz, G. Müller
4486
Modeling and analysis of the Camus I RC shear wall P. Martinelli, L. Martinelli, M.G. Mulas
4497
Optimal design of layered refractories for thermal shock resistance J. Hein, M. Kuna
4511
A variational multiscale method with multifractal subgrid-scale modeling for large-eddy simulation of turbulent flow V. Gravemeier, U. Rasthofer
4525
Pure and hybrid optimizers applicable to aeronautical design problem K. Chiba
4544
The interpolation of the director vector for isogeometric Reissner-Mindlin shell analysis W. Dornisch, S. Klinkel
4556
XFEM modeling of inelastic material behavior and damage phenomena in composites S. Müller, M. Kästner, V. Ulbricht
4566
On the characterization of the plastic behaviour of sheet metals with bulge test: numerical simulation study C.A. Rodrigues, L.C. Reis, N.A. Sakharova, M.C. Oliveira, J.V. Fernandes
4575
Wave generation and absorption with OpenFOAM P. Higuera, J. L. Lara, I.J. Losada
4590
Agglomeration-based physical frame dG discretizations for high-order accurate CFD F. Bassi, L.A. Botti, A. Colombo
4606
Dual decomposition of optimal control problems with coupled nonlinear dynamics S. Hentzelt, K. Graichen
4625
A study about the influence of height on slope stability using limit equilibrium methods and evolutionary computation D. Greiner, F. Chirino, J.M. Emperador, B. Galván, G. Winter
4639
Numerical simulations of two-phase flow with ComFLOW: past and recent developments R. Luppes, B. Duz, H.J.L. van der Heiden, P. van der Plas, A.E.P. Veldman
4647
High speed flow control using synthetic jet actuators C. Nae, M.V. Pricop, G. Cojocaru
4663
Experimental comparison for two one-dimensional constitutive models for shape memory alloy wires used in anti-seismic applications A. Chiozzi, M. Merlin, R. Rizzoni, A. Tralli
4672
Interaction between velocity potential and displacement in time-harmonic elasto-acoustic coupling: a numerical method with spectral elements and controllability approach S. Mönkölä
4683
ECCOMAS 2012 e-book | XVI
Robust vibration reduction of structures with uncertain piezoelectic joints Y. Karim, C. Blanze
4694
Mechanical modelling of human hernia repair based on experimental simulations I. Lubowiecka, A. Tomaszewska, C. Szymczak, M. Śmietański
4708
Adaptive strategies for moment estimation using stochastic collocation and Kriging based approaches D. Chandra Sekhar, A.J. Keane, A.I.J. Forrester
4720
Fractional multi-phase hereditary materials: mellin transform and multi-scale fractances M. Di Paola, F.P. Pinnola, M. Zingales
4735
On the design of a non-conforming high-resolution finite element scheme M. Möller
4746
Two-scale modeling of reactive powder concrete by the method of numerical homogenization A. Denisiewicz, M. Kuczma
4765
Spectral fictivious domain methods with internal forcing for solving elliptic problems L. Le Penven, M. Buffat
4778
A primal-dual shakedown analysis of 3D structures using the face-based smoothed finite element method N.T. Tran, M. Staat
4787
Numerical stability enhancement of modeling hyperelastic materials T.M. Duong, H.N. Nguyen, M. Staat
4794
Mechanical behavior of fractional visco-elastic beams M. Di Paola, R. Heuer, A. Pirrotta
4809
Computer modelling of strengthening of brick masonry cross vaults with FRP composites J. Szołomicki, P. Berkowski, J. Barański
4820
A rational approach to modeling turbulence in industrial flows B. Basara
4830
Goal-oriented error estimation and adaptive control in the reduction of nonlocal particle models L. Chamoin, J. Marchais, C. Rey
4841
Verification of a mesomechanically motivated constitutive law for FRP B. Stier, S. Reese
4848
A novel solid-beam finite element for the simulation of nitinol stents J. Frischkorn, S. Reese
4859
An accurate numerical method for computation of two-phase flows with surfactants S. Ganesan, A. Hahn, K. Held, L. Tobiska
4878
Upwind-difference potentials method for chemotaxis model Y. Epshteyn
4890
Numerical constitutive model for wood with elastic-plastic characteristic M. Oppel, M.G. Jahreis, K. Rautenstrauch
4902
Numerical model of a cylinder pin reinforced metal to composite single-lap shear joint S. Ucsnik, T. Staffenberger
4917
A singular-free procedure for the direct computation of bifurcation points of shell structures F.-J. Falkner
4926
Unified multiscale model for predicting the mechanical behavior of textile reinforced concrete X.F. Guan, X. Liu, Y. Yuan
4939
Shear cell test setup for characterization of bulk material flowability in a granular simulation environment J. Fuchs, C. Weiß
4948
Identification of ultrasonic properties of layered materials M.G. Messineo, G.L. Frontini, L. Gaete Garretón
4959
Experimental and numerical analysis of the tensile test of aluminium welded sampels P. Lacki, J. Adamus, T. Sadowski, K. Wojsyk, M. Kneć
4969
Computational rheology of core-shooting materials F. Uhlig, R. Schwarze, S. Luding
4980
A weakly compressible formulation for modelling liquid-gas sloshing J.A. Heyns, O.F. Oxtoby, A.G. Malan
4990
ECCOMAS 2012 e-book | XVII
Error estimation and error bounding in quantities of interest based on equilibrated recovered displacement fields E. Nadal, O.A. González-Estrada, J.J. Ródenas, S.P.A. Bordas, P. Kerfriden, F.J. Fuenmayor
4999
Numerical simulations of impacts using combined finite-discrete element method H. Smoljanović, N. Živaljić, Ž. Nikolić, A. Munjiza
5019
Friction welding of the bars made of aluminium and titanium alloys P. Lacki, K. Wojsyk, K. Kudła, R.E. Śliwa
5029
Error estimation and error bounding in energy norm based on a displacement recovery technique E. Nadal, O.A. González-Estrada, J.J. Ródenas, S.P.A. Bordas, F.J. Fuenmayor
5042
Identification of internal boundary position in two-layer domain on the basis of external surface temperature distribution S. Freus, K. Freus, E. Majchrzak, B. Mochnacki
5058
Computational study of a hybrid flow control system on a NACA 4415 airfoil A.A. Rojas, O.D. López
5073
Isogeometric analysis of space rods: considerations on stress locking M. Cuomo, L. Greco
5094
Elasto-hydrodynamic lubrication of rough contacts: on a rigorous generalisation of the homogenisation approach B.F. Scheichl, F.S. Guerrieri Paleotti
5113
An application of hp-adaptivity to the inverse problem of electrical impedance tomography P.D. Ledger
5133
Ferrohydrodynamic flow simulation in porous media using the Lattice Boltzmann method A. Sousa, M. Hadavand
5152
Numerical optimization of rectangular micro-channel heat sinks H.-W. Tang, P.-J. Cheng, Y.-T. Yang, Y.-P. Hsu
5163
Level set-based topology optimization using an immersed boundary element method S. Yamasaki, T. Yamada, T. Matsumoto
5182
Researches of high-speed flows in slotted channel of complicated shape M. Goldfeld, A.V. Starov, K.Y. Timofeev, Y.V. Zakharova
5195
Finite element code in Python as a universal and modular tool applied to Kohn-Sham equations R. Cimrman, J. Vackář, M. Novák, O. Čertík, E. Rohan, M. Tůma
5212
CFD analysis of the drying process of coal blend during coal coking process Z. Bulinski, L. Slupik, A.J. Nowak
5222
Direct numerical simulation of the 3D separated viscous fluid flows around the horizontally moving blunt bodies P.V. Matyushin, V.A. Gushchin
5232
Numerical simulation prediction for the elastic behavior of concrete taking into account its mesoscopic structure R. Sassine, E. Malachanne, E. Garcia-Diaz, F. Dubois, M. Vinches
5242
Numerical homogenization of transfer properties of heterogeneous media by immersed interface method D.P. Do, D. Hoxha, S. Wu, N. Belayachi
5256
Failure modeling of concrete with a novel strain rate sensitive viscoelastic retarded damage material formulation U. Häussler-Combe, T. Kuehn
5270
A generalized isogeometrical analysis approach for free vibration analysis of plane elasticity problems B. Hassani, M.H. Abolbashari, A.H. Taheri, N.Z. Moghaddam
5289
Uncertainties on the inverse source problem for elliptic boundary value problems C.J.D.S. Alves, N. Martins, M. Colaco, M.L.D.S. Rainha, N.C. Roberty
5298
Modeling of compression test for large cell 3D reinforced composite specimens I. Osheva, A. Tashkinov, V. Shavshukov
5312
Numerical and experimental investigation of the piezoelectric actuator used for the synthetic jets membrane control R. Rimašauskiene, W. Ostachowicz, P. Malinowski, T. Wandowski
5321
Treatment of simultaneous deformation and solid-state precipitation in thermo-kinetic calculations P. Sherstnev, P. Lang, E. Kozeschnik
5331
ECCOMAS 2012 e-book | XVIII
Validity of models and their verification M. Okrouhlik, R. Kolman
5339
Estimation of unknown contact resistance by means of reciprocity function approach M. Colaco, C.J.D.S. Alves
5359
From nodal patch schemes to averaged strain elements G. Castellazzi, P. Krysl
5375
Numerical and experimental studies on segregation patterns in granular flow from two hoppers P. Seil, J. Ortega Gomez, S. Pirker, C. Kloss
5389
Analysis of the clinical performance of an aortic BMHV by numerical simulation S. Annerel, L. Taelman, J. Bols, T. Claessens, J. Degroote, P. Segers, P. Verdonck, J. Vierendeels
5403
Total FETI method and singular matrices in engineering problems A. Markopoulos, T. Brzobohaty, T. Kozubek, Z. Dostal
5411
Modelling of nonlinear vibro-acoustic wave interaction in cracked aluminium plates using local interaction simulation approach A. Martowicz, P. Packo, W.J. Staszewski, T. Uhl
5420
Zonal large eddy simulation for the numerical prediction of the acoustic performance of an axial fan M. De Gennaro, A. Zanon, H. Kühnelt, P. Giannattasio
5430
Approximation of objects by spheres for multisphere simulations in DEM S. Amberger, M. Friedl, C. Goniva, S. Pirker, C. Kloss
5446
Developing magnetogasdynamic flow and heat transfer in a microchannel H.C. Weng
5459
Meshless analysis of circular plate with varying position of piezoactuator P. Stanak, J. Sladek, V. Sladek, S. Krahulec
5466
Analysis of column web panel in shear for asymmetrical steel joints using finite elements models A. Loureiro, M. Lopez, E. Bayo
5482
Elasto-plasto-damage modeling of laminated composites H.E. Pettermann, J. Gager, E. Rama, T. Flatscher
5492
CFD calculation of heat transfer and combustion processes in the cooling stack of a converter plant J. Contreras Espada, P. Laaber, T. Steinparzer, F. Wackerle, G. Wimmer
5499
Two-way coupling modeling through Eulerian moment method for spray injection in engine simulations O. Emre, F. Laurent, S. de Chaisemartin, S. Jay, D. Kah, M. Massot
5511
Medical device risk analysis: blood damage potential in heart valves’ regurgitation phase M. Grigioni, G. Wang, C. Daniele, G. D'Avenio
5529
Multi-layered textile composites - a shell element based homogenization approach J. Gager, H.E. Pettermann
5540
Fluid-structure interaction in a weakened basilar artery A. Montanino, M. Angelillo
5552
Preliminary assessment of a new algorithm for the MHD equations at all Mach number regimes C. Xisto, J.C. Páscoa, P.J. Oliveira
5573
RTM permeability prediction using CFD and a GPU acceleration of a lattice Boltzmann solution for sub-grid probability density functions L. Bergamasco, S. Izquierdo, M.A. Jimenez
5587
Modified level set equation for gas-liquid interface and its numerical solution V. Sabel'nikov, A. Ovsyannikov, M. Gorokhovski
5597
Energy absorption of braided structures and their numerical analysis L. Eckstein, R. Matheis
5612
Reducing spurious drag forces when using mesh adaptivity in CFD F.F.M. Milthaler, G.J. Gorman, M.D. Piggott
5621
Application of fractional chaotic models in geotechnics R. Magaña, A. Hermosillo, M. Pérez
5641
Frequency-domain Navier-Stokes computations of transonic nozzle flows S. Labit, M. Philit, J.-C. Chassaing, S. Aubert, P. Ferrand
5658
Finite strain inelastic models with gradient averaging and AceGen implementation B. Wcislo, T. Zebro, K. Kowalczyk-Gajewska, J. Pamin
5673
ECCOMAS 2012 e-book | XIX
Numerical and analytical determination of multispan cable eigenfrequencies O.A. Ivanova
5688
Assembly optimization of two-dimensional structures by multiobjective evolutionary algorithm C.J. Camacho, D.A. Garzón
5697
3D vortex structures dynamics simulation using vortex fragmentons I.K. Marchevsky, G.A. Shcheglov
5716
Transverse isotropic elastic dynamic sphere problem B. Chabaud, J. Brock, T. Williams
5736
Parameter identification of time-homogenized models describing material fatigue G. Puel, D. Aubry
5749
IMEX Runge-Kutta schemes for hyperbolic systems with diffusive relaxation G. Russo, S. Boscarino
5764
Finite element simulation of dynamic pile penetration into a saturated porous medium H. Sabetamal, M. Nazem, S.W. Sloan, J.P. Carter
5774
Direct numerical simulation of gas transfer with high Schmidt number in a buoyant-convective flow B. Kubrak, J. Wissink, H. Herlina
5786
Calculation of theoretical shear strength of metals and covalent crystals based on ab initio and empirical atomistic models Y. Umeno, Y. Shiihara, A.M. Iskandarov, S.V. Dmitriev
5797
Numerical study on multiphase flows with compressible effects in converging-diverging nozzle M.S. Jin, C.T. Ha, W.G. Park
5806
Inverse analysis for estimating thermal property from full field measurement M. Maekawa, S. Kubo, S. Ioka
5815
Morphology effects on plasticity behavior of cellular materials S. Imatani
5826
Unsteady flow through the gap of Savonius turbine rotor K. Kludzińska, J. Swirydczuk
5835
Identification of a vertical crack by the active pulse-echo method using smart layer T. Oohigashi, Y. Wataka, S. Kubo
5844
Strain field theory for viscoelastic continuous high-speed webs with plane stress behavior M. Kurki, J. Jeronen, T. Saksa, T. Tuovinen
5854
Evaluation of carotid stent scaffolding through patient-specific finite element analysis F. Auricchio, M. Conti, M. Ferraro, A. Reali
5870
Local maximum entropy particle based hydrodynamics in GPUs D. Hartmann, D. Theurer
5884
Improvement of a resolved open source fluid-particle interaction method A. Hager, C. Kloss, S. Pirker, C. Goniva
5892
Computational challenges in using strain-gradient theories in three dimensions S.-A. Papanicolopulos, A. Zervos
5902
Inverse scattering of guided waves for shape reconstruction of plate thinning B. Wang, S. Hirose, T. Saitoh, K. Nakahata
5910
A damage model to simulate nanoindentation tests of lamellar bone at multiple penetration depth R. Lucchini, D. Carnelli, D. Gastaldi, M. Shahgholi, R. Contro, P. Vena
5919
Comparison of constitutive soil models for the simulation of dynamic roller compaction J. Pistrol, F.-J. Falkner, D. Adam, C. Adam
5925
Improved Adomian decomposition method for generalized Burger's-Fisher equation E. Ocvirk, M. Mestrovic
5940
Sparse direct solution of large finite element problems P. Parik, J. Plesek
5946
Vortex element method for 2D flow simulation with tangent velocity components on airfoil surface V.S. Moreva, I.K. Marchevsky
5952
Calculation of vibro-acoustic structural response by fast BEM and FEM approaches L. Gaul, D. Brunner, M. Junge, J. Herrmann
5966
Gaussian quadrature rules for arbitrary cut-volumes in embedded interface methods Y. Sudhakar, W.A. Wall
5976
ECCOMAS 2012 e-book | XX
Analysis of clothing pressure on the human body T. Kobayashi, S. Oi, M. Sato, M. Tanaka, Y. Isogai, K. Furuichi, S. Ishimaru, C. Nonomura
5991
Role of porosity and tissue mineral density in determining the elastic properties of cortical bone tissue in the human femoral neck V. Sansalone, V. Bousson, S. Naili, C. Bergot, F. Peyrin, J.-D. Laredo, G. Haiat
6004
Three-dimensional modeling of fracture by fast multipole symmetric Galerkin boundary element method. Application to multi-fractured media T.Q. Trinh, S. Mouhoubi, C. Chazallon, M. Bonnet
6013
Two dimensional creep analysis of a linear cracked viscoelstic medium using the extended finite element method P. Hajikarimi, S. Mohammadi, S. Aflaki
6021
Finite strain fracture analysis using the extended finite element method R. Rashetnia, S. Mohammadi, I. Mahmoudzadeh Kani
6031
Identification of structural resonance peaks using EMI method S. Opoka, L. Skarbek, T. Wandowski, P. Malinowski, W. Ostachowicz
6040
On application of vortex element method for aeroelastic airfoil dynamics simulation G.A. Shcheglov, A.V. Ermakov
6050
Application of the inverse analysis for retrieval of the heat transfer coefficient for free surface water jet impingement A. Ryfa, R.A. Bialecki
6064
Step configuration influence on combustion in premixed hydrogen-air supersonic flow N.N. Fedorova, I.A. Bedarev, Y.V. Zhakharova, M.A. Goldfeld
6074
Diffuse failure mechanism involved in a vertical breakwater foundation M.M. Stickle, P. de la Fuente, C. Oteo
6089
Numerical simulation of blood flows in the aorta with aortic valves by virtual flux method T. Fukui, K. Morinishi
6099
On increase of eficiency of plasma multi-actuator system S.L. Chernyshev, A.P. Kuryachii, D.A. Rusyanov, V.V. Skvortsov
6109
Study on highly efficient numerical simulation of flow using thirteen velocity quasi-equilibrium lattice Boltzmann model T. Yasuda, T. Hashimoto, I. Tanno, Y. Tanaka, H. Minagawa, K. Morinishi, N. Satofuka
6124
Mullins' effect in polymer/clay nanocomposites: observations and constitutive modeling A.D. Drozdov, J.D. Christiansen, R. Klitkou
6130
Implicit high-order discontinuous Galerkin solution of turbulent flows with an explicit algebraic Reynolds stress model F. Bassi, L.A. Botti, A. Colombo, C. De Bartolo
6145
Experimental and numerical investigations on fire-resistance of a wood-concrete composite deck R. Meena, M. Schollmayer, S. Hehl, T. Tannert
6161
Effect of idealized versus measured inlet velocity profiles on image-based CFD of aortic hemodynamics D. Gallo, R. Ponzini, G. Isu, F. Pennella, M.A. Deriu, G. De Santis, C. Bignardi, G. Rizzo U. Morbiducci
6173
A frictional-kinetic model for dilute to dense gas-particle flows S. Schneiderbauer, S. Pirker
6185
Numerical and experimental study of the bulge test of sandwich shells with metal foam cores H. Mata, R.M. Natal Jorge, A.D. Santos, M.P.L. Parente, R. Valente, A.A. Fernandes
6199
Processing and evaluation of gear data using statistical classifiers C. Tschöpe, M. Wolff
6207
Computational homogenisation of polycrystalline elastoplastic microstructures at finite deformations E. Lehmann, S. Loehnert, P. Wriggers
6213
Analytical formulation of the fracture path and shear resistance for RC beams L. Saucedo, R.C. Yu, G. Ruiz
6229
Structural analysis of a body in white for battery integration using finite element and macro element with the focus on pole crash optimization P. Luttenberger, M. Ostrowski, M. Kurz, W. Sinz
6243
ECCOMAS 2012 e-book | XXI
Aerodynamic shape optimization of wind turbine blades using a 2-D panel method with a boundary layer solver and a genetic algorithm O. Polat, N. Sezer Uzol, I.H. Tuncer
6263
Effect of jet injection on flow structure and mixing in channel with sudden expansion N.N. Fedorova, I. Fedorchenko, M. Goldfeld, S.A. Valger
6279
Application of the method of fundamental solutions for the plane elastoplastic problem M.A. Jankowska, J.A. Kolodziej
6296
Modelling of hydrogel extracellular matrix deformation caused by embedded cells M.H. Doweidar, S. Manzano, R. Moreno-Loshuertos, I. Ochoa, M. Doblaré
6314
Mechanical analysis of pavement material using time-dependent plasticity and isotropic damage models I.F. Gomes, L.M. Costa, I.D.D.S. Pontes
6323
Simulation of quasi-brittle failure by means of a continuum damage model based on first order strain gradient elasticity U.M. Mühlich, M. Kuna
6332
An efficient algorithm for parallel k-exact finite volume reconstruction on unstructured grids F. Haider, P. Brenner, B. Courbet, J.-P. Croisille
6349
Macro modelling for multi-phase transformations at large strains R. Mahnken, M. Wolff, A. Schneidt
6361
Toward the automation of a non linear solver coupling Harmonic Balance and Asymptotic Numerical Methods (HBANM) E. Sadoulet-Reboul, A. Lejeune
6377
A multiple level-set approach for the simulation of flows with moving immersed boundaries C. Günther, M. Meinke, W. Schröder
6388
Structural health monitoring based on piezoelectric sensors W. Ostachowicz, P. Kudela, P. Malinowski, S. Opoka, M.W. Radzieński, L. Skarbek, T. Wandowski
6404
An efficient elasto-plastic parallel solver based on Total-FETI domain decomposition M. Čermák, T. Kozubek
6414
The information-flux method: a true Petrov-Galerkin formulation based on maximum-entropy methods applied to convection-dominated problems K. Nissen, V. Gravemeier, W.A. Wall
6425
Formation flight aerodynamics of oblique flying wing type aircrafts M. Rütten, M. Trenker, H. Rosemann
6439
Simulation of dynamic fracture processes in polycrystalline silicon microsystems by means of a multi-step, domain decomposition method F. Confalonieri, A. Ghisi, G. Cocchetti, A. Corigliano
6453
A penalty-projection algorithm for incompressible fluid-structure interaction S. Bnà, S. Manservisi, G. Bornia
6472
Free vibration of functionally graded beams using the dynamic stiffness method H. Su, J.R. Banerjee
6492
Application of the method of fundamental solutions for inverse problem related to the determination of elasto-plastic properties of cylindrical bar J.A. Kolodziej, M.A. Jankowska, M. Mierzwiczak
6505
Computational fluid dynamics of partially rarefied flows with coupled kinetic Boltzmann/Navier-Stokes methods R. Steijl, G. Barakos
6515
Nonlinear conjugate gradient algorithm for model based design of experiments M. Deregnaucourt, M. Stadlbauer, C. Hametner, S. Jakubek, J. Wurzenberger
6535
Numerical assessment of mass conservation on a MAC-type method for viscoelastic free surface flows F.P. Martins, C.M. Oishi, F.S. Sousa, J.A. Cuminato
6545
Numerical investigation on efficiency increase in high altitude propulsion systems using plasma actuators M. Abdollahzadeh, J.C. Páscoa, P.J. Oliveira
6563
On the multipoint meshless FD method using the local Petrov-Galerkin approach I. Jaworska, J. Orkisz
6582
ECCOMAS 2012 e-book | XXII
Model-free closed-loop flow control E. Atam, L. Mathelin, L. Cordier
6592
On the role of interface dissipation in MEMS resonators A. Frangi, M. Cremonesi, A. Jaakkola, T. Pensala
6601
Development of high order convective schemes considering the source A. Pascau, N. Garcia, F. Alcrudo
6608
Shape optimization of a flow around circular diffuser in a turbulent incompressible flow S. Erne, M. Lenarcic, C. Bauer, S.A. Kyriacou
6615
Runge-Kutta methods for time integration in computational inelasticity - how to go beyond order 2 B. Eidel, C. Kuhn
6634
Hybrid total FETI method M. Jarosova, T. Kozubek, M. Mensik, A. Markopoulos
6653
Wavenumber domain filtering of elastic wave propagation for damage localization in composite plates M.W. Radzieński, P. Kudela, W. Ostachowicz
6664
High-order discontinuous Galerkin solution of unsteady problems using modified extended backward differentiation formulae A. Nigro, A. Ghidoni, S. Rebay, F. Bassi
6672
On effective implementation of the non-penetration condition for non-matching grids preserving scalability of FETI based algorithms O. Vlach, Z. Dostal, T. Kozubek, T. Brzobohaty
6691
Acceleration of digital-image-based FEM computation by GPU G. Nagai, U. Ueda, Y. Takai, M. Tsukino
6700
A multiphysical simulation model for laser assisted manufacturing H. Koch, R. Gómez Vázquez, A. Otto
6709
Finite element and B-spline methods for one-dimensional non-local elasticity M. Malagù, E. Benvenuti, A. Simone
6723
Anisotropic viscoelasticity within the framework of isothermal two-mechanism models N.H. Kröger, M. Wolff
6734
Modeling of dynamic delamination in L-shaped composite beams B. Gozluklu, D. Coker
6748
A fully implicit 3D elliptic mesh generator for moving boundary flow problems with large arbitrary deformations J. Papaioannou, Y. Dimakopoulos, J. Tsamopoulos
6770
Isogeometric analysis and the finite cell method D. Schillinger, M.A. Scott, J.A. Evans, M.J. Borden, L. Dede, T. Hughes, E. Rank
6781
Modelling of creep and TRIP during heating and austenitisation S. Bökenheide, J. Montalvo-Urquizo, M. Wolff
6792
Identification of contamination flux in a domain of porous media as an inverse problem solved with artificial neural networks M. Lefik, D.P. Boso
6800
Solution to industry benchmark problems with the Lattice-Boltzmann code XFlow D.M. Holman, R. Brionnaud, Z. Abiza
6809
Numerical investigation into mixed electroosmotic flow and pressure-driven flow in microchannels with wavy surfaces C.-C. Cho, Y.-L. Chang, Y.-L. Chang
6825
Characterization of macroscopic mechanical behavior of concrete with mesoscopic scale finite element analysis J.J.C. Pituba, E.A.S. Neto
6835
Mechanobiological model for the simulation of bone mineralization density distribution (BMDD) L. Santos, P.R. Fernandes, H. Rodrigues, J.E. Fonseca
6850
Comparative study of wind effects on tall buildings using international codes and CFD B. Parv, R. Hulea, R. Zoicas
6857
The geometric basis of mimetic spectral approximations M. Gerritsma, J. Kreeft, A. Palha, P. Rebelo, R. Hiemstra
6867
Towards efficient multi-objective optimization for endwall contouring B. Barr, P. Venugopal, S. Shankaran
6887
ECCOMAS 2012 e-book | XXIII
High-fidelity marine propeller analysis using LES with an immersed boundary method S. Schröder, E. Balaras, N. Beratlis
6897
Numerical simulation of a jet-vortex wake behind a cruise aircraft M.A. Lobanova, Y.M. Tsirkunov
6909
A high-order conservative method for the simulation of compressible multiphase flows V. Perrier, E. Franquet
6923
A note on relationship between fixed-pole and moving-pole approaches in static and dynamic analysis of non-linear spatial beam structures G. Jelenic, M. Gacesa, M. Saje
6941
Zaidenberg’s learning model for the evolution of altruistically cooperative behavior N.J. Zaidenberg, I. Eshel
6952
Advances in Feel++ : a domain specific embedded language in C++ for partial differential equations V. Chabannes, C. Daversin, V. Doyeux, M. Ismail, C. Prud'homme, A. Samake, C. Trophime, S. Veys
6958
Two imbricate finite element methods with smooth approximations F. Cazes, G. Meschke
6977
Numerical modeling of 3 point bending test of a reinforced concrete beam using a second gradient theory G. Jouan, P. Kotronis, F. Collin
6987
Uzawa-like methods for numerical modelling of unsteady viscoplastic Bingham medium flows L.V. Muravleva, E.A. Muravleva
6996
Object-oriented code MARPLE 3D: simulations of radiative hydrodynamic/MHD effects at high-performance computer systems A. Boldarev, V. Gasilov, O. Olkhovskaya, S. Dyachenko, G. Bagdasarov, S. Boldyrev, I. Gasilova, E.Y. Dorofeeva
7008
Large eddy stimulation using simple eddy-viscosity RANS data P. Batten, U. Goldberg, O. Peroomian, S. Chakravarthy, A. Batista de Jesus
7028
Plain- and reinforced-concrete planar beam finite elements with embedded transversal cracking G. Jelenic, P. Sculac, L. Skec
7035
On the use of inflow/outflow boundary conditions in incompressible, internal flow problems using smoothed particle hydrodynamics S. Khorasanizade, J. Pinto, J. Sousa
7050
Effect of thickness and pre-crack length on delamination of unidirectional L-shaped laminated composites B. Gozluklu, D. Yavas, D. Coker
7060
Contribution cancelled 7071 Bayesian assimilation of multi-fidelity stochastic finite element models F.A. DiazDelaO, S. Adhikari, M.I. Friswell
7080
On some composite yield criteria based on the homogenization method L.V. Muravleva
7087
Multi-disciplinary conceptual design of multi-stage hybrid rocket using genetic algorithm and data mining technique M. Kanazaki, Y. Kitagawa, K. Kitagawa, M. Nakamiya, T. Shimada
7099
Weakly enforced boundary conditions for the NURBS-based finite cell method M. Ruess, Y. Bazilevs, D. Schillinger, N. Zander, E. Rank
7119
Numerical investigations on negative refraction and focusing of ultrasonic Lamb waves by a thickness change in an isotropic plate F. Schubert
7135
On comparative study of the eight-chain model and its modified versions for rubber hyperelasticity M. Hossain, A.S. Amin, N. Kabir
7149
Numerical simulations on piezoresistivity of nanofiller and polymer based nanocomposites B. Hu, N. Hu, J. Li, A. Alamusi, Y. Liu, H. Ning, L. Wu
7162
Efficient sensitivity analysis for virtual prototyping T. Most, J. Will
7176
Some aspects of numerical tests of special railway wagon for intermodal transport of heavy semitrailers W. Krason, T. Niezgoda, K. Damaziak
7192
ECCOMAS 2012 e-book | XXIV
Hybridizable discontinuous Galerkin p-adaptivity for the incompressible Navier-Stokes equations G. Giorgiani, S. Fernández-Méndez, A. Huerta
7204
The interior field method for Laplace's equation on circular domains with circular holes Z.-C. Li, H.-T. Huang, M.-G. Lee
7219
Fatigue analysis of fiber-reinforced polymers S. Vervoort
7233
GPU implementation of the lattice Boltzmann method and virtual flux method I. Tanno, T. Hashimoto, T. Yasuda, Y. Tanaka, K. Morinishi, N. Satofuka
7244
Multiscale analysis of aeronautical composite structures using high fidelity generalized method of cells D. Ivančević, I. Smojver
7251
On the uncertainty quantification of blood flow viscosity and geometrical configuration of the portal vein J.C. Pereira, J.S. Moura, A.R. Ervilha, J.C.F. Pereira
7264
Combining a CDM model and a FE-particle method to analyse the ruin modes of a composite structure during a crash C. Espinosa, F. Lachaud, J. Limido, J.-L. Lacome
7282
A detailed analysis of engine knock initiation by means of a stochastic reactor model M. Heiss, T. Lauer, B. Geringer
7300
Modeling of natural gas engine with the emphasis on prediction of knock D. Kozarac, A. Schuemie, H. Ofner, R. Tatschl
7308
Optimization of a heavy duty engine by integrated numerical models F. Forsthuber, T. Lauer, B. Geringer
7321
Global combustion mechanism for simulation of self ignition S. Voglsam, F. Winter
7333
The orientation of melt bands in an extending lithosphere H.B. Muhlhaus, A. Mohajeri, Y. Finzi, K. Regenauer-Lieb
7344
Multi-parametric stability investigations for pressurized thin membranes A. Eriksson
7357
Analysis of elastoplastic problems with centrifugal load by triple-reciprocity boundary element method Y. Ochiai, V. Sladek
7372
Efficient algorithm for finding all solutions of the inverse kinematics problem of 6R general manipulators T.I. Rudny
7386
Analysis of nonlinear dynamic behavior of micro circular plate actuator using hybrid numerical method C.-C. Liu
7402
Deformation effects on the motion of a non-neutrally drop in plane Poiseuille flow M. Bayareh
7410
Analysis of innovative composite aircraft structures T.L. Havar, C. Werchner
7417
Contact algorithms for cell-centered Lagrangian schemes G. Clair, B. Despres, E. Labourasse
7424
Mid-frequency vibration analysis of a touch screen with stochastic interfaces C. Blanze, P. Rouch
7439
Constitutive microplane and interface laws for multiscale analysis of steel fiber concrete G. Etse, A. Caggiano, S. Vrech
7459
High-order finite volume schemes for two-dimensional nonconservative hyperbolic systems M.J. Castro, J.M. Gallardo, S. Ortega, M. de la Asunción, J.M. Mantas
7478
Natural periods of vibration of outrigger braced shear walls M.P. Nicoreac, J.C.D. Hoenderkamp
7493
A methodological perspective on computational engineering design under uncertainty M. Padulo, M. Guenov
7509
Advanced optimization of hybrid-electric-vehicle drivelines using engine-in-the-loop simulation T. Reimers, B. Tilch, P. Eilts
7529
Quantitative assessment of random field models in FE buckling analyses of composite cylinders V. De Groof, M. Oberguggenberger, H. Haller, R. Degenhardt, A. Kling
7543
A stable and dual consistent boundary treatment using finite differences on summation-by-parts form J. Berg, J. Nordström
7557
ECCOMAS 2012 e-book | XXV
Reduced basis methods for quadratically nonlinear partial differential equations with stochastic influences K. Urban, B. Wieland
7571
Multilevel meshless model for the elasto-plastic torsion of prismatic bars V. Kozulić, B. Gotovac
7591
Free vibration analysis of magnetoelectroelastic beams using the meshfree radial point interpolation method T.Q. Bui, C. Zhang
7607
Analysis and application of suitable CFD-based optimization strategies for high-lift system design P. Iannelli, J. Wild, M. Minervino, F. Moens, M. Raets
7618
An investigation of natural convection boundary layer flow by using homotopy analysis method C.-L. Chen, W.C. Tien
7638
Acceleration of URANS for application to separated high-lift flows P. Eliasson, C.M. Marongiu, S. Mikhaylov, V. Vlasenko, S. Bosnyakov, E. Kazhan
7648
Frequency and time domain BEM in fracture dynamic contact problems - comparative study V. Zozulya
7665
On the H1 discrete - continuum coupling based on the Arlequin method (DEM-CNEM) M. Jebahi, J.-L. Charles, F. Dau, L. Illoul, I. Iordanoff
7685
Evaluation of numerical uncertainties on the modeling of dry masonry structures submitted to out-of-plane loading, using the NSCD method in comparison with experimental tests P. Taforel, F. Dubois, S. Pagano
7698
Contribution cancelled 7717 Comparison of grid adaptation techniques for high lift flows application J. Ponsin, M. Meheut
7726
Dyke-type fracture behaviour in a sedimentary caprock associated with CO2 injection E. Karnaeva, D. Leguillon, A. Baroni, C. Putot
7745
A fracture model for pearlitic steel bars using a cohesive model F. Suárez, J.C. Gálvez, D. Cendón, J.M. Atienza, M. Elices
7759
A one-dimensional 4-node shear-flexible beam element for beam-to-solid modeling in mechanically jointed connections made with screws or nails E.-M. Meghlat, M. Oudjene, H. Ait-Aidet, J.-L. Batoz
7771
Mass-, momentum- and energy conserving discretizations for the shallow water equations B. Van 't Hof, A.E.P. Veldman
7782
Modelling of concrete degradation due to alkali - silica reactionin variable hygro-thermal conditions D. Gawin, W. Grymin, F. Pesavento, L. Simoni, B. Schrefler
7802
A beam to 3D model switch in transient dynamic analysis M.G. Tannous, P. Cartraud, D. Dureisseix, M. Torkhani
7822
Effect of electronic device assembly (fixture tube) on the frequency response of a miniature loudspeaker during end use S.J. Pawar, J.H. Huang, Z.J. Hong
7832
Numerical analysis of a large-scale and deep cylindrical excavation in Shanghai soft deposit W.D. Wang, L.Y. Chang, Z.H. Xu, Q.P. Weng
7843
A geometric bridge between regularised damage and energetically equivalent cracks E. Tamayo-Mas, A. Rodríguez-Ferran
7858
The collocations and least squares method: application to numerical solution of the Navier-Stokes equations V.P. Shapeev, V.I. Isaev, S.V. Idimeshev
7871
Numerical modeling of the boundary value problems using the R-function method and atomic basis functions N. Brajčić Kurbaša, B. Gotovac, V. Kozulić
7891
A general concept for approximation of the trajectories of anisotropic elasticity for mammalian bone, demonstrated for the human mandible C. Kober, C. Müller, P. Young, A. Fritsch, C. Hellmich
7905
Wave propagation for damage location in a stiffened plate like structure M. Palacz, M.W. Radzieński, M. Krawczuk, Ł. Doliński
7912
ECCOMAS 2012 e-book | XXVI
Numerical investigations of 3D transitional and turbulent boundary layers with heat transfer K. Kielczewski, E. Tuliszka-Sznitko
7920
On efficient numerical solution of time-periodic wave equation using controllability technique and mixed finite elements S. Kähkönen, R. Glowinski, T. Rossi, R. Mäkinen
7931
Two stroke engines with low pressure direct injection - a great challenge for simulation! O. Schögl, F. Winkler, R. Kirchberger, H. Eichlseder
7938
A constitutive model for analyzing the strain induced martensitic transformation (SIMT) in metastable austenitic stainless steel at different strain rates N.S.R. Uppaluri, B.P. Gautham
7955
Systematic-validation of a computer-simulation-environment for modeling and dynamic-behavior-analysis of complex mechatronic mobile robot's systems J.M. Bauer, D. Garayalde, D. Riepl, H. Laguyás
7967
Computational fluid dynamic analysis of the regurgitant flow in a bileaflet mechanical heart valve R.K. Nallamothu, D. Rafiroiu, C. Neamtu, V. Diaz, A. Narracott, P. Lawford, R. Hose
7982
Optimization criteria for the TDM design in slender structures excited by wind load M. Morga, G.C. Marano
7990
Compromise between derivative-based and derivative-free optimization for nonsmooth and noisy dynamic responses M. Yamakawa, F. van Keulen
8007
Interval response analysis of a bridge under a moving vehicle with bounded system parameters based on particle swarm optimization algorithm N. Liu, W. Gao, C. Song, N. Zhang
8021
Contribution cancelled 8036 A CFD benchmark for flow separation control application V. Ciobaca, J. Dandois, H. Bieler
8045
Numerical simulation of elastic wave propagation in composite material M. Bause, U. Köcher
8062
Optimally convergent high-order X-FEM for problems with voids and inclusions E. Sala-Lardies, S. Fernández-Méndez, A. Huerta
8080
Numerical draping simulations of textile composite reinforcements T. Gereke, O. Döbrich, M. Hübner, O. Diestel, S. Krzywinski, C. Cherif
8094
Thermal management in the design space exploration of 3D stacks and corresponding package A. Heinig, U. Knöchel, P. Schneider, A. Wilde
8105
Implementation of the edge-based smoothed extended finite element method Y. Nix, R. Frotscher, M. Staat
8117
Linear vibration of structures containing a liquid with capillarity T. Miras, J.-S. Schotté, R. Ohayon
8124
Residual stress simulation of an aero engine disc during heat treatment G. Rauer, A. Kühhorn, M. Springmann
8144
A machine learning based approach to large scale model evaluation and iterative experimental design A. Bartolomé, T. Palau, A. Kuhn, A. Rauh, H.-U. Mader
8158
Improved mesh morphing based on radial basis functions B. Saalfeld, M. Rütten, S. Saalfeld, J. Künemund
8170
Contribution cancelled 8183 Modelling aircraft cabin sources and input parameter uncertainty for a ray tracing algorithm K. Hoge, M. Rescheleit, O. von Estorff
8196
Toward a synthetic cartilage-like scaffold S. Manzano, L. Herrero, C. Pelegay, C.E. Plazas, M.H. Doweidar, I. Ochoa, J.A. Gómez-Tejedor, J.E. Perilla, J.L. Gómez-Ribelles, M. Doblaré
8210
The algebra of quaternions in non-isothermal poroelastic phenomena M.C. Suarez-Arriaga
8222
Enabling system level simulation of 3D integrated systems C. Bayer, S. Reitz, J. Stolle, A. Wilde, P. Schneider
8242
Implicit integration of a model for martensite reorientation in shape memory alloys W. Zaki
8250
ECCOMAS 2012 e-book | XXVII
TFETI coarse problem massively prarallel implementation D. Horak, V. Hapla
8260
Assessing convergence properties of RANS solvers with manufactured solutions L. Eca, G. Vaz, M. Hoekstra
8268
Steady viscous flow past an array of isothermal wires: effect of the blockage ratio on the flow and heat transfer characteristics J.J. Lizardi, L.A. Martinez-Suástegui
8288
Ultimate capacity of reinforced concrete sections under fire conditions H.F. Barros, C.C. Ferreira, P. Vila Real
8307
Simulation of tyre/road noise by means of a FEM/BEM approach J.H. Schutte, Y.H. Wijnant, E. Verhulp, A. de Boer
8319
Buckling in plate girder webs N.E. Shanmugam
8329
Parallel implicit DNS of Rayleigh-Taylor instability I. Yilmaz, F.O. Edis, H. Saygin
8342
Modeling of the micro-damage in the fibers of composites of stochastic structure with anisotropic components by using statistical approach L. Nazarenko
8361
Finite element analysis of cracked nano-fiber reinforced composite W.K. Ahmed, Y. Al-Douri, K. Aslantas
8373
Singular boundary method for stress analysis in multi-layered coating systems Y. Gu, W. Chen, A.H.D. Cheng
8383
Error functional based finite element formulations for general coupled problems S. Maeda, K. Satoz, H. Takeda, M. Yamada
8398
Mutiple-gradient descent algorithm for multiobjective optimization J.-A. Desideri
8410
The weighted edge finite element method for time-harmonic Maxwell equations with singular solution V.A. Rukavishnikov, A. Mosolapov
8430
Thermal recirculation of viscous incompressible flows in enclosures A. Nicolás, B. Bermúdez
8438
Simulation of hyperbolic type bio-heat transfer problems by differential transformation method H.-Y. Lai, J.-H. Ni, C.-C. Chang
8448
A combined MRT Lattice-Boltzmann and phase-field method for fluid flow and heat transfer simulations in cellular solids J. Ettrich, B. Nestler, M. Rölle
8461
Mapping complex microdefects of porous CFRP-laminates onto structured FE-meshes using the Gauss-point method D. Krause, J. Kreikemeier, D. Chrupalla
8473
Study on method to determining the rational depth of metro station in composed of soil and weathered rock stratum X.D. Wang, Y. Yuan, X. Wu, Z. Du
8483
Modelling of microstructural evolution of titanium during diffusion saturation by interstitial elements Y. Matychak, O. Tkachuk, I. Pohrelyuk, V. Fedirko
8494
Proper choice of model for turbulence treatment while research on flow in large-scale CFD-domains M.D. Muhasilovic, I. Vela, Z. Trobok, A. Petrovic, A. Mededovic, E. Gacanin
8503
Adjoint methods in CFD-based optimization - Gradient computation & beyond K. Giannakoglou, D.I. Papadimitriou, E.M. Papoutsis-Kiachagias, C. Othmer
8523
Mean velocity profile in the vicinity of a building within urban boundary layer with high density of buildings M. Popovac
8540
An improved thermal-structural finite element model for ductile-to-brittle failure mode transition to model ductile material behavior at high strain rates L. Écsi, P. Élesztős
8549
Multiphysics computational models for cardiac flow and virtual cardiography J.H. Seo, V. Vedula, R. Mittal
8564
ECCOMAS 2012 e-book | XXVIII
Robustness evaluations for CAE-based virtual prototyping of automotive applications J. Will
8578
Robust design optimization based on reliability analysis C. Bucher
8598
On the application of CFD in fire safety - between theory and practice or the user’s role M. Münch
8610
Numerical validation of an acoustic imaging method for duct spinning mode with in-duct circular microphone array X. Huang, E. Peers
8619
On the estimation of the subgrid scale model coefficents in large eddy simulation G. Ghorbaniasl, V. Agnihotri, C. Lacor
8633
Numerical study of aerosol deposition in a simplified human mouth-throat model V. Agnihotri, G. Ghorbaniasl, S. Verbanck, C. Lacor
8646
Parallelization of convolution quadrature based boundary element method for general anisotropy T. Saitoh, A. Furukawa, S. Hirose, C. Zhang
8660
Effect of grain roughness on strength, volume changes, elastic and dissipated energies during quasi-static triaxial compression using DEM J. Kozicki, J. Tejchman
8666
Numerical simulation of the turbulent flow in a rectangular channel with lateral slot J. Goulart, S.I.S. Souza
8677
Accurate and efficient look-up table approach for dense gas flow simulations E. Rinaldi, R. Pecnik, P. Colonna
8690
A comparison study of cavitating flow in a ventricular assist device using laminar and turbulent flow models J.-H. Chen, C. Huang
8705
myRTM: an approach for the simulation of Resin Transfer Moulding (RTM) processes based on cellular automata G.A. Barandun, M. Henne, E. Giger, R. Arbter
8717
Studies of agglomerating, poly-dispersed gas-solid two-phase flows using the EUgran+poly model D. Schellander, S. Schneiderbauer, S. Pirker
8730
A systematic approach to design crash elements and to validate FE-analyses by combining computational methods with analytical considerations B. Müller, M. Schagerl, K.-U. Schröder
8742
Effects of numerical models on internal blasting simulation of a tube-tunnel Z. Wang, Y. Yuan
8752
A phase-field topology optimization model using double-obstacle function T. Takaki
8761
Identification of alloy thermal capacity using the broken line model R. Szopa, B. Mochnacki
8769
Computational models of nanocrystalline materials A. Mrozek, T.S. Burczynski
8779
High-order X-FEM for image-based computations G. Legrain, N. Chevaugeon
8789
LCM process simulation based on reliable permeability measurement P. Mitschang, M. Arnold, G. Rieber
8796
Contributions on the use of arbitrarily smooth generalized finite element approximation functions: application to crack modeling D.A.F. Torres, C.S. de Barcellos, P.T.R. Mendonça
8810
Computation of a Fokker-Planck-equation-based multi-scale model for complex flows using the IRBFN method C.-D. Tran, N. Mai-Duy, T. Tran-Cong
8821
Advances in ALE based fluid-structure interaction modeling for offshore engineering applications R.K. Jaiman
8835
Isogeometric analysis of viscous drop deformation in shear flow A.A. Joneidi, C.V. Verhoosel, P.D. Anderson
8846
ECCOMAS 2012 e-book | XXIX
A neural network based elasto-plasticity material model T. Palau, A. Kuhn, S. Nogales, H. Böhm, A. Rauh
8861
A hybrid genetic algorithm for the multi-mode resource-constrained project scheduling J. Magalhaes-Mendes
8871
Problems of analysis of thin-walled structures - statics, free vibrations and sensitivity T. Mikulski, M. Kujawa, C. Szymczak
8883
Finite element simulation of the hygro-thermal response of wood during surface densification A. Genoese, A. Genoese, S. Fortino, L. Rautkari
8902
Multiscale numerical modeling of composite material: a combined FE-ANN approach D.P. Boso, M. Lefik, B. Schrefler
8912
Efficient response simulation by modal analysis of non-linear hysteretic structural systems H. Pradlwarter, C. Jäger, F.-J. Falkner
8927
Sensitivity analysis of uncertain factors in hierarchy model validation S. Yu, B. Xu, X. Liu, J. Mo
8939
Numerical study of microchannel heat sink performance using nanofluids Y.-T. Yang, S.-H. Lin, F.-H. Lai, Y.-T. Yang
8946
Modeling of silo discharge as strongly-coupled fluid-structure-system S. Reinstädler, D. Dinkler
8957
Contribution cancelled 8977 Microplane modeling of martensite reorientation in shape memory alloys R. Mehrabi, M. Kadkhodaei, S. Arbab Chirani
8986
Turbomachinery flow simulations with OpenFOAM M. Heinrich, A. Bäre, P. Hofemeier, R. Schwarze
8995
Anisotropic graded meshes and quasi-optimal rates of convergence for the FEM on polyhedral domains in 3D C. Bacuta, V. Nistor, L. Zikatanov
9003
Criterion for predicting direction of the crack in composites with random structure J. Podgórski
9015
X-FEM assisted simulation of ductile damage induced 2D crack propagation J.-P. Crété, P. Longere, J.-M. Cadou
9024
Static and dynamic analysis of journal bearing D. Shi, X. Shi, J. Han
9038
In situ measurements of anisotropic heat conductivity W.P. Adamczyk, T. Kruczek, R.A. Bialecki
9046
Simulation of microstructure, temperature and stress in wave soldering T. Mizui, T. Takaki
9052
MFS for modelling of inhomogeneous materials with large aspect ratio reinforcing elements V. Kompis, M. Zmindak, Z. Murcinkova
9062
Static recrystallization model using multi-phase-field method and finite element method based on crystal plasticity S. Chinzei, T. Takaki
9075
Phase-field simulations of crack propagation in brittle polycrystal K. Oshima, T. Takaki, M. Muramatsu
9085
Simulation of errors during the calibration of a magnetic and coordinate measuring machine (MCMM) H. Husstedt, U. Ausserlechner, M. Kaltenbacher
9096
Analysis of stiffened plates with different materials by the boundary element method G.R. Fernandes, J.R. Neto
9116
Mixing of electrokinetically-driven power-law fluids in a microchannel with rectangular blocks C.-C. Cho, C.-K. Chen
9127
Strong and weak points of recent indicators of chaos and order used in dynamical systems studies D.N. Deleanu
9138
Finite elements with non homogeneous embedded discontinuities L. Contrafatto, M. Cuomo, G.T. Di Venti
9152
Adsorption modeling in a honeycomb adsorber with the use of SLD adsorption model and 3D boundary element flow solver T. Stimec, M. Hribersek, J. Ravnik, S. Basic
9172
ECCOMAS 2012 e-book | XXX
A second order sub mesh penalty method for incompressible flows on unstructured meshes A. Etcheverlepo, S. Vincent, J.-P. Caltagirone, D. Monfort, P. Angot
9183
A logarithmic strain decomposition for modeling of trabecular bone subjected to large compressive strains M. Horak, M. Jirasek, P. Zysset
9197
Eulerian numerical methods on unstructured meshes for the simulation of sprays within liquid rocket engines C. Le Touze, A. Murrone, E. Montreuil, H. Guillard
9210
Numerical modelling of interacting structures using a single mesh multivelocity strategy G. Folzan, P. Le Tallec, J.-P. Perlat
9227
Online training of data-driven POD-based surrogates for optimization M. Guénot, I. Lepot, C. Sainvitu, R. Filomeno Coelho
9242
Automation of stochastic finite element method T. Melink, J. Korelc
9262
Optimization methods applied to aerodynamic flow control J. Labroquère, R. Duvigneau
9279
Investigation of heat transfer characteristics for plate-fin heat sink H.-T. Chen, S.-T. Lai, L.J. Teseng, L.-Y. Haung,
9299
Magnetohydrodynamical modeling and simulations of electric arc extinction in a network P. Delmont, M. Torrilhon
9314
A new procedure to smooth and untangle meshes on parameterized surfaces A. Gargallo-Peiró, X. Roca, J. Sarrate
9331
Non-linear simplified approach for soil-structure interaction A. Romero, J. Maestre, P. Galvín
9344
Adjoint boundary conditions for turbomachinery flows C. Frey, A. Engels-Putzka, E. Kügeler
9360
Including the uncertainty of material properties in the structural modeling of flexible pavement D. Castillo, S. Caro
9380
Entropy conservative and entropy stable finite volume schemes for multi-dimensional conservation laws on unstructured meshes A. Madrane, U.S. Fjordholm, S. Mishra, E. Tadmor
9395
top related