electromagnetic spectrum
Post on 11-Jan-2016
18 Views
Preview:
DESCRIPTION
TRANSCRIPT
may be regarded as a form of electromagnetic
radiation, consisting of interdependent, mutually
perpendicular transverse oscillations of an electric and
magnetic field. It forms a narrow section of the
the wavelength range being approximately 390nm
(violet) to 740nm (red). According to the quantum
theory, light is absorbed in packets of light quanta, or
photons.
Source: Dictionary of Physics
Oscillations and Waves
Oscillation – a periodic variation of any physical quantity
Wave – oscillation of an extended medium which transmits a disturbance
Some definitions:
Amplitude - the difference between the maximum displacement and minimum displacement of the wave.
Cycle (Period), T - one complete oscillation of a periodic wave, after which the wave is returned to its original form. (measured in sec)
Frequency, f - the number of cycles that a periodic wave undergoes per second. ( measured in Hz = 1/sec)
Wavelength, - the distance from one peak to the next of a periodic wave. (measured in m)
Electromagnetic (EM) Waves
These are produced by vibrating charges, either positive (protons) or negative (electrons).
EM waves are described as all other waves –
Amplitude – magnitude of the electric (or magnetic) fieldIntensity – proportional to (Amplitude)2
Frequency – colorWavelength
Definition: Spectrum – a range of frequencies
EM travel in empty space at the speed of light –
c = 299,792,457 m/sec 3×108 m/sec
Source: http://micro.magnet.fsu.edu/primer/java/polarizedlight/emwave/index.html
The wave on the left has vertical polarization and the wave on the right has horizontal polarization.
Polarization
Light in transparent media
Glass and other transparent media transmit light, which travels at different speeds inside of various materials (media). The speed is given in terms of a parameter called the refractive index, denoted by n, of the medium. The wavelength of a light wave inside a medium also depends on the refractive index.
The refractive index, n: n c
speed in medium .
In air n 1 medium, n = 2 air, n 1
c 3×108 m/sec
n 1
Snell’s Law
n2
n1
n1
1 2sin sinn n
Light rays bend when traversing boundaries between media with different refractive index:
in
out
See http://micro.magnet.fsu.edu/primer/java/scienceopticsu/refraction/index.html
Light refraction
When a wave moves from one medium into another in which the light’s speed is different, the direction of the wave’s travel bends. The wavefronts remain continuous across the boundary between the two media.
n1
n2 > n1n1
wavefront
n2 > n1
MEDIUM n(visible)
vacuum 1
air 1.0003
water 1.3
glass 1.5
diamond 2.4
gallium arsenide
3.5
Some values for the refractive index of common optical materials
Total internal reflection
If light traveling inside a medium with a higher refractive index than the surrounding medium, and it hits the inner surface of the medium at a steep enough angle, then the light is reflected completely. This angle is known as the “critical angle”. This is the basis of optical fiber, which is used to transmit light over long distances.
Angle smaller than the critical angle
Angle equal to the critical angle
Angle greater than the critical angle:Total Internal Reflection
n > n’
See http://micro.magnet.fsu.edu/primer/java/refraction/criticalangle/index.html
Optical Waveguides and Fibers n > n’ always
Light is guided by total internal reflection
Slab waveguide
n
n’
n’
Confines light by total internal reflection only along one direction in space
in
out
Optical fiber
Cladding
Corenn’
n’
n’
n’
n’
n
n’
n’
n
Optical fibers are cylindrical waveguides, providing light confinement by total internal reflection along all directions which are perpendicular to the propagation direction. These are essentially bendable “light pipes”.
Cross-section
1 – 10 μm
~ 100 μm
sizen > n’ always
Fibers are made of ultrapure SiO2 glass (silica). Different dopants are added both to the core and cladding, such that the refractive index of the core is slightly larger than that of the cladding.
Optical loss in fiber-quality fused silica. (circa 1995)
Optical loss in fiber-quality fused silica. (circa 2001)
To optimize fibers for telecommunications applications it was necessary to purify them to a very high degree and remove all traces of water. This eliminated the high absorption losses in the “communications window”.
Communications window
Fiber-Optic Communications Systems
Example of fiber-optical communication link. Electrical current pulses representing digital data drive a semiconductor laser. The emitted light pulses pass through a fiber and are detected by a photo-detector at the far end.
Laser
Input electric pulses ~10Gb/sec
Light pulses travel in fiber (short or long)
Output electric pulses
Amplifying optical signals
How far can an optical signal (light) travel in fiber before absorption causes significant losses and signal deterioration?
Communications windowFibers can typically transmit information over a distance of 80km, after which signals require amplification and/or regeneration.
Fibers also have a very large bandwidth – the communications window where absorption losses in the fiber are small is broad. This allows transmitting many wavelengths (frequencies) simultaneously.
Amplifiers can be integrated into the fiber, by doping fibers with Erbium atoms.
EDFA – Erbium Doped Fiber Amplifier
In the amplifier, Erbium atoms are pumped by a separate pump semiconductor laser (PSCL). Once in the excited state, these atoms will undergo stimulated emission when the signal pulses arrive at the EDFA. In this way, energy from the EDFA is added to the signal pulses, leading to their amplification.
Laser
Pump laser
Connecting fibers – optical communications systems
MUX = Multiplexing
DEMUX = Demultiplexing
SCL = semiconductor laser
Mod = modulator
Det = detector
Different frequency for each channel
Techniques for multiplexing and demultiplexing. Prisms or diffraction gratings deflect light beams into different angles depending on their frequencies.
Some useful applets: http://mapageweb.umontreal.ca/hamamh/Fiber/FibNet.htm
Multiplexing and Demultiplexing optical signals
prisms
diffraction gratings
For tutorials about light refraction and total internal reflection see
http://micro.magnet.fsu.edu/primer/java/refraction/index.html
To visualize injection of light into optical fibers and fiber networks see
http://mapageweb.umontreal.ca/hamamh/teach.htm
top related