fullerton-uk.com...content pages 10–28 pages 30–33 3 hsk-a 63 hsk-a 80 collet chuck er p. 10...
Post on 14-Jul-2020
4 Views
Preview:
TRANSCRIPT
TOOL HOLDINGSYSTEMSMade in Germany.
Karl Schüssler GmbH & Co. KG, 2015
CONTENT
PAGES 10–28
PAGES 30–33
3
HSK-A 63
HSK-A 80
Collet chuck ER p. 10Collet chuck ER »Mini« p. 11Endmill holder Weldon p. 12Endmill holder Weldon »Cool Tool« p. 13Slim endmill holder Weldon p. 14Endmill holder Whistle Notch p. 15Shrink fit holder 4,5° p. 16Shrink fit holder »Cool Tool« p. 18Extended slim shrink fit holder p. 20Shrink fit holder p. 21Thread shank adapter p. 22ABS holder p. 23Shell mill holder p. 24Shell mill holder »Cool Tool« p. 25Combi shell mill holder p. 26Morse taper adapter p. 27Short drill chuck p. 28
Collet chuck ER p. 30Endmill holder Weldon p. 31Shrink fit holder p. 32Shell mill holder p. 33
PAGES 34–46HSK-A 100
Collet chuck ER p. 34Endmill holder Weldon p. 35Endmill holder Weldon »Cool Tool« p. 36Endmill holder Whistle Notch p. 37Shrink fit holder 4,5° p. 38Shrink fit holder »Cool Tool« p. 40ABS holder p. 41Shell mill holder p. 42Shell mill holder »Cool Tool« p. 43Combi shell mill holder p. 44Morse taper adapter p. 45Short drill chuck p. 46
4
SK 40 DIN 69871
Collet chuck ER p. 59Collet chuck ER »Mini« p. 60Endmill holder Weldon p. 61Endmill holder Weldon »Cool Tool« p. 62Slim endmill holder Weldon p. 63Shrink fit holder4,5° p. 64Shrink fit holder »Cool Tool« p. 66Extended slim shrink fit holder p. 68Shrink fit holder p. 69 Thread shank adapter p. 70Shell mill holder »Cool Tool« p. 71 Combi shell mill holder p. 72Short drill chuck p. 73
PAGES 59–73
PAGES 75–83 SK 50 DIN 69871
Collet chuck ER p. 75Endmill holder Weldon p. 76Endmill holder Weldon »Cool Tool« p. 77Shrink fit holder4,5° p. 78Shrink fit holder »Cool Tool« p. 80Shell mill holder »Cool Tool« p. 81 Combi shell mill holder p. 82Short drill chuck p. 83
HSK-E 40 and HSK-E 50
Collet chuck ER p. 54Shrink fit holder 4,5° p. 55 Shrink fit holder 3° p. 56
PAGES 54–56
HSK-A 40 and HSK-A 50
Collet chuck ER p. 49Endmill holder Weldon p. 50Shrink fit holder 4,5° p. 51Shell mill holder p. 52
PAGES 49–52
5
Collet chuck ER p. 106Collet chuck ER »Mini« p. 107Endmill holder Weldon p. 108Endmill holder Whistle Notch p. 110Shrink fit holder 4,5° p. 111Shell mill holder »Cool Tool« p. 113
PAGES 85–102
PAGES 106–113
PAGES 115–136ACCESSORIES
POLYGON SHANK CORUM C4, C5, C6, C8
MAS-BT 30
MAS-BT 40
MAS-BT 50
Collet chuck ER p. 85Shrink fit holder 4,5° p. 86
Collet chuck ER p. 87Collet chuck ER »Mini« p. 88Endmill holder Weldon p. 89Shrink fit holder 4,5° p. 90Shrink fit holder »Cool Tool« p. 92Shell mill holder »Cool Tool« p. 93Combi shell mill holder p. 94Short drill chuck p. 95
Collet chuck ER p. 96Endmill holder Weldon p. 97Shrink fit holder 4,5° p. 98Shell mill holder »Cool Tool« p. 100Combi shell mill holder p. 101Short drill chuck p. 102
Collet chuck extensions p. 115Shrink fit extensions p. 116Pull stud p. 120Coolant tube + wrench p. 127Taper cleaner p. 127Collets, wrenches p. 128Clamping screws, nuts, wrenches, other p. 129Sealed collets, sealable clamping nuts p. 130Clamping nuts, wrenches, clamping screws, other p. 132
WHAT IS IMPORTANT TO US
1
2
3
4
5
Our commitment to GermanyOur products are 100 % Made in Germany.
We train – from beliefWe believe in our success and we also want dedicated employees in the future.
Innovation from traditionWe are constantly investing to ensure our machinery remains at the forefront of technological development.
The best quality standardsOnly high quality products can convince our customers.
Environmental awarenessWe feel bound to the use of sustainable forms of energy and have installed a photovoltaic installation and CO2-neutral wood heating system on our premises.
7
4
7
6
8
2
1
5
3
9
10
11
QUALITY FEATURES
Fine balanced and hardened clamping nut
Radius transfer to ER-taper maintains accuracy of the collet
Big insertion depth for tools with long shank
10
9 11
Hard reworked HSK-discharge surfacegarantees:
HSK-A, DIN 69871 and CORUM have includedthe bore for disk-chip as standard
Standard shrink fit chucks with 4-threadsfor supplementary fine balancing
Long version with transition radius for increased radial rigidity
Long shrink fit for maximum clamping force withinsertion radius only
· safe release of HSK at tool change
1
3
5
6
7
8
2
4
Hard reworked drive slots on HSK-taper guarantees:
· 100% symmetry of the HSK-slots· perfect seat and torque transfer in machine spindle
· (0,01 instead of 0,04 according to DIN)· highest runout accuracy· maximum clamping force in spindle· maximum radial rigidity
perfect runout of clamping shoulder
Hard reworked HSK-shoulder guarantees:
All toolholders fine balanced to G2,5 25.000 or max. unbalance <= 1 gmm, for:
· · longer spindle life cycle· maximum tool life· better milling surface
smooth and bearing protecting spindle run
Runout tolerance of the different toolholdertypes:
Toolholdertype:
Shell mill holder, Combi shell mill holder
RunoutA>=160
Runout A<160
<= 6 µ <= 6 µ
Endmill holder Weldon, Collet chuck,Shrink fit holder, End mill holder Whistle Notch
<= 3 µ <= 4 µ
Morse taper adapter <= 8 µ
Permanebined with higher spindle speeds means tools can be used with ever higher cutting speeds. This is a major advantage, as the biggest potential for savings in manufacturing costs lies in cycle time and machine availability.
But what if these benefits cannot be used to their full advantage because the only connection between the machine spindle and the tool – i.e. the tool holder – is not working correctly?
The following criteria are especially important for optimal machining and are fulfilled completely by our tool holders:
This is the first important requirement for achieving optimal processing results. Apart from bad machining results (dimensional accuracy and surface quality), inaccurate taper shanks can also damage machine spindles over time. Given there can be well over 1,000 tool changes a day, inaccurate cones can damage a new spindle in just a few weeks and lead to a significant reduction in machine performance.
High cutting speeds require high rotations. The better the tool holder is balanced, the more effectively you can use the perfor-mance which expensive HSC tools offer, as the highest balancing quality means there are practically no oscillations and vibrations. Finely balanced tool holders also protect the high-precision spindle bearings and thus make a significant contribution towards en-suring a long service life of your spindles and high availability of the machine.
Only when cutting tools have optimal runout can tool performance be fully utilised and this in turn leads to reduced processing time. Good runout also significantly increases service life. If you consider that, depending on the interface (HSK or SK) and clamping system (e.g. ER chuck or shrink fit chuck), a tool holder can cost between €60 and €120 and has a service life of five years, the price is completely irrelevant in relation to how often the cutting tool is changed on this holder.
nt improvements in cutting materials and coatings com-
PERFECT POSITIONING OF THE CONE IN THE SPINDLE:
HIGH ROTATIONS, HIGH BALANCE DEMANDS:
RUNOUT OF THE TOOLS:
WHAT IS IMPORTANT TO YOU?
JUST COMPARE WHETHER THE CHEAPER OPTION PAYS OFF IN THE END...
»NONAME« HSK-A63 ER COLLET CHUCK WITH STANDARD COLLETS, CLAMP Ø 16MM
Price: 85,- € · Usage time: 5 yearsTool costs: solid carbide, coated, Ø 16 mm: 130,- €Consumption: 1 milling cutter per week, 48 milling cutters per year = 6,240,- € / yearIn 5 years = 31,200,- € in total
Alternatively:
SCHÜSSLER HIGH-PRECISION COLLET CHUCK WITH HIGH-PERFORMANCE NUTS AND COLLET, CLAMPING Ø 16MM
Price: 130,- €, Usage: 5 yearsTool costs: solid carbide, coated, Ø 16 mm: 130,- €Savings in tool costes with a 10% improvement in service life:Consumption: 0,9 milling cutters per week,43 milling cutters per year = 5,590,- € / yearIn 5 years = 27,950,- € in total
Savings: 3,250 € when you invest 45,- € in a better tool holder!
1
2
3
3
1
2
TOOL HOLDERS WITH SHANK HSK-A 63, HSK-A 80 AND HSK-A 100
HS
K-A
63
+ H
SK
-A 8
0 +
HS
K-A
10
0
63
100
80
63
100
80
53
85
68
32
50
40
26
29
26
42
45
42
12,54
20,02
16,04
16
20
18
18
22
20
M18x1
M24x1,5
M20x1,5
HSK d1 d9 max. l1 f1 f2 min. b1 b2 b3 M
9
d1M
l1 f1
f2
d9b3 b1 b2
Application:
Technical Design:
Includes:
Accessories:
For clamping tools with cylindrical shank in collets ER
Runout of outer taper to inner taper. Due to adjusted taper tolerances of the ER-Inner taper and the Collet taper max. runout of ≤ 8µ at 2,5 X D.
Clamping nut
See page 128.
HSK-A 63
Collet chuck ER
Order No. HSK ER Clamping range A D
606302-006606302-001606302-002606302-003606302-004
606302-01606302-02606302-03606302-04
606302-011606302-021606302-031606302-041
6363636363
63636363
63636363
1116253240
1–71–101–162–204–26
7575757585
2028425063
16253240
16253240
1–101–162–204–26
1–101–162–204–26
100100100120
160160160160
28425063
28425063
SHORT
= 100
= 160
HS
K-A
63
10
Sealed versions seepages 130, 131.
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
HSK-A 63
HS
K-A
63
HSK ER A D
606302-23 63 16 1–10 100 22
= 100
= 160
606302-21 63 11 1–7 100 16
606302-27 63 25 1–16 100 35
636363
111625
1–71–10
160160160
1622351–16
606302-22606302-24606302-28
11
Collet chuck ER »Mini«
Sealed versions seepages 130, 131.
Application:
Technical Design:
Includes:
Accessories:
For clamping tools with cylindrical shank in collets ER.
Runout of outer taper to inner taper. Due to adjusted taper tolerances of the ER-Inner taper and the Collet taper.max. runout of ≤ 8µ at 2,5 X D.
Clamping nut.
See page 128.
Order No. Clamping range
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Order No. HSK D1 A D2 L MSHORT
= 120
= 160
606304-01606304-02606304-03606304-04606304-05606304-06606304-07606304-08606304-10606304-11
606304-31606304-32606304-33606304-34606304-35606304-36606304-37606304-38
606304-61606304-62606304-63606304-64606304-65606304-66606304-67606304-68606304-69606304-70
63636363636363636363
6363636363636363
63636363636363636363
681012141618202532
68101214161820
681012141618202532
6565658080808080110110
120120120120120120120120
160160160160160160160160160160
25283542424850526572
2528354242485052
25283542424850526572
35354148485151536064
3535414848515153
35354148485151536064
M6M8
M10M12M12M14M14M16
M18x2M20x2
M6M8
M10M12M12M14M14M16
M6M8
M10M12M12M14M14M16
M18x2M20x2
M
HSK-A 63
12
Endmill holder Weldon
HS
K-A
63
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Application:
Technical Design:
Includes:
Accessories:
For clamping tools with cylindrical shank according to DIN 1835 B.
Runout of outer taper to D1 ≤ 0,003 mm. Tolerance of bore H4 (more accurate as DIN).
Clamping screw.
See page 132
HSK-A 63
Order No. HSK D1 A D2 L M
63
SHORT
= 120
6063041-016063041-026063041-036063041-046063041-056063041-066063041-076063041-086063041-106063041-11
6063041-316063041-326063041-336063041-346063041-356063041-366063041-376063041-38
63 68
1012141618202532
68
101214161820
6565658080808080110110
120120120120120120120120
25283542424848526572
2528354242484852
35354148485151536064
353541 4848515153
M6M8
M10M12M12M14M14M16
M18x2M20x2
M6M8
M10M12M12M14M14M16
6363636363636363
6363636363636363
M
13
HS
K-A
63
See page 132.
Endmill holder Weldon »Cool Tool«
Application:
Technical Design:
Includes:
Accessories:
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Particularly suitable for tools without internal coolant, and for machining at difficult positions with bad chip removal.
Two holes in the toolholder lead the coolant directly to the cutting edge. Coolant holes can be re-sealed with screws for the use of tools with internal coolant holes.
Clamping screw and 2 x M3-screws to plug the coolant holes if needed.
See page 132.
M1
M2
14
HS
K-A
63
HSK-A 63
Order No. HSK D1 A D2 D3 L M1 M2
LONG
= 160
606327-01606327-03606327-05606327-07606327-09606327-11606327-13606327-15
606327-02606327-04606327-06606327-08606327-10606327-12606327-14606327-16
6363636363636363
6363636363636363
68101214161820
68101214161820
100100100120120120120120
160160160160160160160160
1315161719212325
1315161719212325
24
24
26
26
28
28
29
29
32
32
34
34
36
36
38
38
36,536,540,545,545,548,548,550,5
36,536,540,545,545,548,548,550,5
M6M6M6M6M6M8M8M8M8
M6M6M6M6M8M8M8M8
M6M8x1
M10x1M10x1M12x1M12x1M16x1
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1
Slim endmill holder Weldon
Application:
Technical Design:
Includes:
Accessories:
For clamping tools with cylindrical shank according to DIN 1835 B and E.
Runout of outer taper to D1 ≤ 0,003 mm. Tolerance of bore H4 (more accurate as DIN).
Special clamping screw (with ball head) and set screw.
BalancedG 6,3 at min-18.000
See page 133.
Order No. HSK D1 A D2 L M1 M2 V
63
SHORT
606309-01606309-02606309-03606309-04606309-05606309-06606309-07606309-08606309-10606309-11
63 68
1012141618202532
8080809090
100100100110110
25283542424850526572
36,536,540,545,545,548,548,550,556,560,5
M6 M5 10101010101010101010
M8 M6M10 M8M12 M10M12 M10M14 M12M14 M12M16 M16
M18x2 M20M20x2 M20
6363636363636363
M1
M2
15
HS
K-A
63
HSK-A 63
Endmill holder Whistle Notch
For clamping tools with cylindrical shank according to DIN 1835 E. Application:
Technical Design:
Includes:
Accessories:
Runout of outer taper to D1 ≤ 0,003 mm. Tolerance of bore H4 (more accurate as DIN).
Clamping screw and set screw.
BalancedG 6,3 at min-18.000
Order No. HSK D1 A D2 D3 V L M
SHORT
606321-13606321-14606321-15606321-01606321-02606321-03606321-04606321-05606321-06606321-07606321-08606321-09606321-10
63636363636363636363636363
345681012141618202532
80808080808590909595
100115120
12121221212424272733334444
17171727273232343442425353
---
10101010101010101010
---
37374248485151535963
---
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1M16x1
See page 133.
For clamping tools with cylindrical shank of solid carbide or HSS, tol. h6.
M
16
HSK-A 63
HS
K-A
63
Extra short shrink fit holderscan be found on page 18,
shrink fit holders »Cool Tool«.
Long versions see next page >>
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Application:
Technical Design:
Includes:
Accessories:
Shrink fit holder 4,5 °
Made of special heat resistant steel. Suitable for inductive shrinking unit. With four additionalthreads for supplementary fine balancing. Runout of outer taper to D1 ≤ 0,003 mm.
Set screw.
HSK-A 63
17
Order No. HSK D1 A D2 D3 V L M= 120
= 160
= 130
= 200
606321-313606321-314606321-315606321-31606321-32606321-33606321-34606321-35606321-36606321-37606321-38
606321-513606321-514606321-515
606321-613606321-614606321-615606321-61606321-62606321-63606321-64606321-65606321-66606321-67606321-68606321-69606321-70
606321-51606321-52606321-53606321-54606321-55606321-56606321-57606321-58606321-59
606321-81606321-82606321-83606321-84606321-85606321-86606321-87606321-88606321-89
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63
63636363
636363
636363636363
6363
6363
34568101214161820
345
345681012141618202532
6810121416182025
6810121416182025
120120120120120120120120120120120
130130130
160160160160160160160160160160160160160
130130130130130130130130130
200200200200200200200200200
1212122121242427273333
121212
12121221212424272733334444
212124242727333344
212124242727333344
1717172727323234344242
---
17171727273232343442425353
272732323434424253
272732323434424253
---
1010101010101010
---
---
10101010101010101010
101010101010101010
101010101010101010
---
3737424848515153
---
---
37374248485151535963
373742484851515359
373742484851515359
---
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1
---
---
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1M16x1
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1
HS
K-A
63
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Shrink fit holder 4,5 °
See page 134.
18
HSK-A 63
HS
K-A
63
Shrink fit holder »Cool Tool« 4,5 °
M
Order No. HSK D1 A D2 D3 V L M
EXTRA SHORT
6063219-036063219-046063219-066063219-086063219-09
6363636363
1012162025
7070757585
2626293545
3333374350
-----
4248515359
-----
Extra short version withoutlength setting screw
Long versions see next page >>
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Application:
Technical Design:
Includes:
Accessories:
Particularly suitable for tools without internal coolant, and for machining at difficult positions with bad chip removal.
Two holes in the toolholder lead the coolant directly to the cutting edge. Coolant holes can be re-sealed with screws for the use of tools wirh internal coolant holes.
Set screw and 2 x M3 screws to plug the coolant holes if needed.
HSK-A 63
19
Order No. HSK D1 A D2 D3 V L M
606321-5139*606321-5149*606321-5159*606321-519606321-529606321-539606321-549606321-559606321-569606321-579606321-589606321-599606321-609
63636363636363636363636363
345
68
1012141618202532
130130130130130130130130130130130130130
212124
24272733334444
272732
32343442425353
101010
10101010101010
373742
48485151535963
M5M6
M8x1
M10x1M10x1M12x1M12x1M16x1M16x1
M16x1
= 120
= 130
606321-319606321-329606321-339606321-349606321-359606321-369606321-379606321-389
6363636363636363
68101214161820
120120120120120120120120
2121242427273333
121212
2727323234344242
---
1010101010101010
---
3737424848515153
---
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1
---
HS
K-A
63
* Cool tool holes can not be plugged.
606321-139*606321-149*606321-159*
636363
808080
212124
272732
---
----
---
SHORT
606321-019606321-029606321-039606321-049606321-059606321-069606321-079606321-089606321-099
636363636363636363
4568
10121416182025
3
80808590909595
100115
212124242727333344
272732323434424253
101010101010101010
373742484851515359
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Shrink fit holder »Cool Tool« 4,5 °
Order No. HSK D1 A D2 D3 V L M
606321-41606321-42606321-43606321-44
63636363
681012
120120120120
15151818
30303333
10101010
37374248
M5M6
M8x1M10x1
M
See page 133.
= 120
20
HS
K-A
63
HSK-A 63
Extended slim shrink fit holder
Application:
Technical Design:
Includes:
Accessories:
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
For clamping tools with cylindrical shank of solid carbide or HSS, tol. h6.
Made of special heat resistant steel. Suitable for inductive shrinking unit. Runout of outer taper to D1 ≤ 0,003 mm.
Set screw.
Order No. HSK D1 A D2 D3
SHORT
= 120
606351-01606351-02606351-03606351-04
606351-31606351-32606351-33606351-34
63
63
63
63
63
63
63
63
681012
681012
80808080
120120120120
12141618
12141618
18202224
22242628
HSK-A 63
21
HS
K-A
63
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Application:
Technical Design:
Shrink fit holder 3°
For clamping tools with cylindrical shank of solid carbide or HSS, tol. h6.
Made of special heat resistant steel. Suitable for inductive shrinking unit. Runout of outer taper to D1 ≤ 0,003 mm.
For clamping threaded shank end mill bodies.
Order No. HSK M L D1 D2
606308-01606308-02606308-03606308-04606310-01606310-02606310-03606310-04606310-06606312-01606312-02606312-03606312-04606312-06606316-01606316-02606316-03606316-04606316-06
63636363636363636363636363636363636363
M8M8M8M8
M10M10M10M10M10M12M12M12M12M12M16M16M16M16M16
255075
100255075
100150255075
100150255075
100150
13,813,813,813,8181818181821212121212929292929
15232530232530354524303538452934354048
M
22
HS
K-A
63
HSK-A 63
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Thread shank adapter
Application:
Technical Design: Runout of outer taper to D1 ≤ 0,005 mm.
Order No. HSK ABS A
606326-01606326-02606326-03606326-04606326-05
6363636363
2532405063
5050607080
ABS holder
ABS
HSK-A 63
23
HS
K-A
63
BalancedG 6,3 at 8 min-1.000
With ABS mounting parts.
See page 136.
Application:
Technical Design:
Includes:
For holding modular tool shanks with ABS-interface.
Order No. HSK D1 A D2 l1 M
SHORT
= 100
= 160
606305-01606305-02606305-03606305-04606305-05
606305-011606305-021606305-031606305-041606305-051
606305-611606305-621606305-631606305-641
63
63
63
63
63
63
63
63
63
6363
6363
63
1622273240
1622273240
16222732
5050606060
100100100100100
160160160160
3848607889
3848607889
38486078
1719212427
M8M10M12M16M20
M8M10M12M16M20
M8M10M12M16
1719212427
17192124
24
HSK-A 63
HS
K-A
63
M
Shell mill holder
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Application:
Technical Design:
Includes:
Accessories:
With extended flange. Runout of outer taper to D1 ≤ 0,006 mm.
Clamping screw and drive keys.
See page 134.
For adapting shell mills with transverse slot.
Order No. HSK D1 A D2 l1
SHORT
= 100
= 160
606305-21606305-22606305-23606305-24
606305-211606305-221606305-231606305-241
606305-619606305-629606305-639606305-649
63
63
63
63
63
63
63
63
63
63
63
63
16222732
16222732
16222732
50506060
100100100100
160160160160
38486078
38486078
38486078
17192124
17192124
17192124
25
HSK-A 63
HS
K-A
63
M
M
M8M10M12M16
M8M10M12M16
M8M10M12M16
Shell mill holder »Cool Tool«
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Application:
Technical Design:
Includes:
Accessories andSpareparts:
For adapting shell mills with coolant through to the cutting edges.
Clamping screw and drive keys.
See page 134.
With extended flange. Runout of outer taper to D1 ≤ 0,006 mm.
For adapting shell mills with transverse and longitudinal groove.
See page 135.
Order No. HSK D1 A D2 l1 l2 M
SHORT
= 100
= 160
606306-01606306-02606306-03606306-04606306-05
606306-011606306-021606306-031606306-041
606306-61606306-62606306-63606306-64606306-65
63
63
63
63
63
63
63
63
63
6363
63
6363
1622273240
16222732
1622273240
6060606070
100100100100
160160160160160
3240485870
32404858
3240485870
1719212427
2731333841
2731333841
27313338
17192124
1719212427
26
HS
K-A
63
HSK-A 63
M
M8M10M12M16M20
M8M10M12M16
M8M10M12M16M20
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Application:
Technical Design:
Includes:
Accessories:
Combi shell mill holder
Runout of outer taper to D1 ≤ 0,006 mm.
Clamping screw, drive key and adjusting spring.
Order No. HSK MK M A D
606314-01606314-02606314-03606314-04
63636363
1234
M6M10M12M16
100120140160
25324048
HS
K-A
63
HSK-A 63
27
Order No. HSK MK A D
606313-01606313-02606313-03606313-04
63636363
1234
100120140160
25324048
M
Balanced
Balanced
G 6,3 at 8 min-1.000
G 6,3 at 8 min-1.000
Morse taper adapter according to DIN 228A
Application:
Technical Design: Runout of outer taper to D1 ≤ 0,008 mm.
For holding morse taper tools with tang according to DIN 228A.
Morse taper adapter according to DIN 228B
Application:
Technical Design: Runout of outer taper to D1 ≤ 0,008 mm.
For holding morse taper tools with tang according to DIN 228B
Wrench.
Order No. HSK Clamping range D1 A D2
606395-31606395-32
6363
1-131-16
104109
4356
HSK-A 63
HS
K-A
63
28
Short drill chuck
BalancedG 6,3 at 8 min-1.000
Application:
Technical Design:
For clamping tools with cylindrical shank. Also suitable for tools with internal coolant.
Order No. HSK ER Clamping Range A= 100
= 160
D
608002-01608002-02608002-03
608002-011608002-021608002-031
808080
808080
16
16
25
25
32
32
1–10
1–10
1–16
1–16
2–20
2–20
100
160
100
160
100
160
28
28
42
42
50
50
Sealed versions seepages 130, 131.
30
HSK-A 80
HS
K-A
80
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Application:
Technical Design:
Includes:
Accessories:
For clamping tools with cylindrical shank in collets ER
Runout of outer taper to inner taper. Due to adjusted taper tolerances of the ER-Inner taper and the Collet taper max. runout of ≤ 8µ at 2,5 X D.
Clamping nut.
See page 128.
Collet chuck ER
Order No. HSK D1 A D2 L M
608004-01608004-02608004-03608004-04608004-06608004-08608004-09608004-10
8080808080808080
68101216202532
80808080
100100100110
2528354248526572
3535414851536064
M6M8
M10M12M14M16
M18x2M20x2
M
31
HSK-A 80
HS
K-A
80
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Endmill holder Weldon
Application:
Technical Design:
Includes:
Accessories:
For clamping tools with cylindrical shank according to DIN 1835 B.
Runout of outer taper to D1 ≤ 0,003 mm. Tolerance of bore H4 (more accurate as DIN).
Clamping screw.
See page 132.
Order No. HSK D1 A D2 D3 V L M
608021-01608021-02608021-03608021-04608021-05608021-06608021-07608021-08608021-09608021-10
608021-61608021-62608021-63608021-64608021-66608021-68608021-69
80808080808080808080
80808080808080
681012141618202532
681012162025
8585909595
100100105115120
160160160160160160160
21212424272733334444
21212424273344
27273232344253
27273232343442425353
10101010101010101010
10101010101010
37374248485151535963
37374248515359
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1M16x1
M5M6
M8x1M10x1M12x1M16x1M16x1
M
SHORT
= 160
32
HSK-A 80
HS
K-A
80
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
See page 133.
For clamping tools with cylindrical shank of solid carbide or HSS, tol. h6.Application:
Technical Design:
Includes:
Accessories:
Shrink fit holder 4,5 °
Made of special heat resistant steel. Suitable for inductive shrinking unit. With four additionalthreads for supplementary fine balancing. Runout of outer taper to D1 ≤ 0,003 mm.
Set screw.
Order No. HSK D1 A SHORT
D2 l1 M
608005-02608005-03608005-04608005-05
80808080
22273240
50506060
48607889
19212427
M8M10M12M16
M
33
HSK-A 80
HS
K-A
80
Shell mill holder
Application:
Technical Design:
Includes:
Accessories:
With extended flange. Runout of outer taper to D1 ≤ 0,006 mm.
Clamping screw and drive keys.
See page 134.
For adapting shell mills with transverse slot.
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Order No. HSK ER Clamping Range A D
610002-01610002-02610002-03610002-04
610002-011610002-021610002-031610002-041
610002-12610002-22610002-32610002-42
100100100100
100100100100
100100100100
16
16
16
25
25
25
32
32
32
40
40
40
1–10
1–10
1–10
1–16
1–16
1–16
2–20
2–20
2–20
4–26
4–26
4–26
100100100120
160160160160
200200200200
28425063
28425063
28425063
SHORT
= 160
= 200
Sealed versions seepages 130, 131.
34
HSK-A 100
HS
K-A
10
0
Application:
Technical Design:
Includes:
Accessories:
For clamping tools with cylindrical shank in collets ER
Runout of outer taper to inner taper. Due to adjusted taper tolerances of the ER-Inner taper and the Collet taper max. runout of ≤ 8µ at 2,5 X D.
Clamping nut.
See page 128.
Collet chuck ER
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Order No. HSK D1 A D2 L MSHORT
= 160
610004-01610004-02610004-03610004-04610004-05610004-06610004-07610004-08610004-10610004-11610004-12
610004-61610004-62610004-63610004-64610004-65610004-66610004-67610004-68610004-69610004-70
100100100100100100100100100100100
100100100100100100100100100100
68101214161820253240
681012141618202532
8080808080
100100100100100120
160160160160160160160160160160
2528354242485052657280
25283542424850526572
3535414848515153606474
35354148485151536064
M6M8
M10M12M12M14M14M16
M18x2M20x2M20x2
M6M8
M10M12M12M14M14M16
M18x2M20x2
M
35
HS
K-A
10
0
HSK-A 100
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Endmill holder Weldon
Application:
Technical Design:
Includes:
Accessories:
For clamping tools with cylindrical shank according to DIN 1835 B.
Runout of outer taper to D1 ≤ 0,003 mm. Tolerance of bore H4 (more accurate as DIN).
Clamping screw.
See page 132
Order No. HSK D1 A SHORT
D2 L M
6100041-016100041-026100041-036100041-046100041-056100041-066100041-076100041-086100041-096100041-10
100100100100100100100100100100
68
1012141618202532
8080808080
100100100100100
25283542424850526572
35354148485151536064
M6M8
M10M12M12M14M14M16
M18x2M20x2
M
36
HSK-A 100
HS
K-A
10
0
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
See page 132.
Endmill holder Weldon »Cool Tool«
Application:
Technical Design:
Includes:
Accessories:
Particularly suitable for tools without internal coolant, and for machining at difficult positions with bad chip removal.
Two holes in the toolholder lead the coolant directly to the cutting edge. Coolant holes can be re-sealed with screws for the use of tools with internal coolant holes.
Clamping screw and 2 x M3-screws to plug the coolant holes if needed.
Order No. HSK D1 A D2 L M1 M2
SHORT
610009-01610009-02610009-03610009-04610009-05610009-06610009-07610009-08610009-10610009-11
100100100100100100100100100100
68
1012141618202532
909090
100100100100110120120
25283542424850526572
36,536,540,545,545,548,548,550,556,560,5
M6 M5M8 M6
M10 M8M12 M10M12 M10M14 M12M14 M12M16 M16
M18x2 M20M20x2 M20
M1
M2
37
HS
K-A
10
0
HSK-A 100
See page 133.
Endmill holder Whistle Notch
For clamping tools with cylindrical shank according to DIN 1835 E. Application:
Technical Design:
Includes:
Accessories:
Runout of outer taper to D1 ≤ 0,003 mm. Tolerance of bore H4 (more accurate as DIN).
Clamping screw and set screw.
BalancedG 6,3 at 8 min-1.000
Order No. HSK D1 A D2 D3 V L M
SHORT
= 120
610021-01610021-02610021-03610021-04610021-05610021-06610021-07610021-08610021-09610021-10
610021-31610021-32610021-33610021-34610021-35610021-36610021-37610021-38
100100100100100100100100100100
100100100100100100100100
681012141618202532
68101214161820
8585909595
100100105115120
120120120120120120120120
21212424272733334444
2121242427273333
27273232343442425353
2727323234344242
10101010101010101010
1010101010101010
37374248485151535963
3737424848515153
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1M16x1
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1
M
Extented versions see next page >>
HSK-A 100
38
HS
K-A
10
0
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
See page 133.
For clamping tools with cylindrical shank of solid carbide or HSS, tol. h6.Application:
Technical Design:
Includes:
Accessories:
Shrink fit holder 4,5 °
Made of special heat resistant steel. Suitable for inductive shrinking unit. With four additionalthreads for supplementary fine balancing. Runout of outer taper to D1 ≤ 0,003 mm.
Set screw.
Order No. HSK D1 A D2 D3 V L M
= 160
= 130
= 200
610021-61610021-62610021-63610021-64610021-65610021-66610021-67610021-68610021-69610021-70
610021-81610021-82610021-83610021-84610021-85610021-86610021-87610021-88610021-89610021-90
610021-51610021-52610021-53610021-54610021-55610021-56610021-57610021-58610021-59
100100100100100100100100100
100100100100100100100100100100
100100100100100100100100100100
681012141618202532
6810121416182025
681012141618202532
160160160160160160160160160160
130130130130130130130130130
200200200200200200200200200200
21212424272733334444
212124242727333344
21212424272733334444
27273232343442425353
272732323434424253
27273232343442425353
10101010101010101010
101010101010101010
10101010101010101010
37374248485151535963
373742484851515359
37374248485151535963
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1M16x1
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1M16x1
39
HS
K-A
10
0
HSK-A 100
Shrink fit holder 4,5 °
Order No. HSK D1 A SHORT
D2 D3 V L M
610021-019610021-029610021-039610021-049610021-059610021-069610021-079610021-089610021-099
100100100100100100100100100
6810121416182025
8585909595
100100105115
212124242727333344
272732323434424253
101010101010101010
373742484851515359
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1
M
HSK-A 100
40
HS
K-A
10
0
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
See page 132.
Shrink fit holder »Cool Tool« 4,5 °
Application:
Technical Design:
Includes:
Accessories:
Particularly suitable for tools without internal coolant, and for machining at difficult positions with bad chip removal.
Two holes in the toolholder lead the coolant directly to the cutting edge. Coolant holes can be re-sealed with screws for the use of tools with internal coolant holes.
Set screw and 2 x M3 screws to plug the coolant holes if needed.
Order No. HSK ABS A
610026-02610026-03610026-04610026-05610026-06610026-07
100100100100100100
3240506380
100
6080809090
100
ABS
41
HS
K-A
10
0
HSK-A 100
With ABS mounting parts.
See page 136.
ABS holder
Application:
Technical Design:
Includes:
BalancedG 6,3 at 8 min-1.000
For holding modular tool shanks with ABS-interface.
Order No. HSK D1 A D2 l1 M
SHORT
= 100
= 160
610005-01610005-02610005-03610005-04610005-05610005-07
610005-011610005-021610005-031610005-041610005-051
610005-611610005-621610005-631610005-641610005-651
100100100100100100
100100100100100
100100100100100
162227324060
1622273240
1622273240
505050506070
100100100100100
160160160160160
3848607889
140
3848607889
3848607889
171921242740
1719212427
1719212427
M M8M10M12M16M20M32
M8M10M12M16M20
M8M10M12M16M20
HSK-A 100
42
HS
K-A
10
0
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Shell mill holder
Application:
Technical Design:
Includes:
Accessories:
With extended flange. Runout of outer taper to D1 ≤ 0,006 mm.
Clamping screw and drive keys.
See page 134.
For adapting shell mills with transverse slot.
Order No. HSK D1 A D2 l1
SHORT
= 100
= 160
610005-21610005-22610005-23610005-24610005-25
610005-211
610005-619
610005-221
610005-629
610005-231
610005-639
610005-241610005-251
610005-649610005-659
100100100100100
100100100100100
100100100100100
1622273240
1622273240
1622273240
5050505060
100100100100100
160160160160160
3848607889
3848607889
3848607889
1719212427
1719212427
1719212427
M
M8M10M12M16M20
M8M10M12M16M20
M8M10M12M16M20
M
43
HS
K-A
10
0
HSK-A 100
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Shell mill holder »Cool Tool«
Application:
Technical Design:
Includes:
Accessories andSpareparts:
For adapting shell mills with coolant through to the cutting edges.
Clamping screw and drive keys.
See page 134.
With extended flange. Runout of outer taper to D1 ≤ 0,006 mm.
Order No. HSK D1 A D2 l1 l2 M
SHORT
= 100
= 160
610006-01610006-02610006-03610006-04610006-05
610006-011610006-021610006-031610006-041610006-051
610006-61610006-62610006-63610006-64610006-65
100100100100100
100100100100100
100100100100100
1622273240
1622273240
1622273240
6060606070
100100100100100
160160160160160
3240485870
3240485870
3240485870
1719212427
2731333841
2731333841
2731333841
1719212427
1719212427
M
M8M10M12M16M20
M8M10M12M16M20
M8M10M12M16M20
HSK-A 100
44
HS
K-A
10
0
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
For adapting shell mills with transverse and longitudinal groove.
See page 135.
Application:
Technical Design:
Includes:
Accessories:
Combi shell mill holder
Runout of outer taper to D1 ≤ 0,006 mm.
Clamping screw, drive key and adjusting spring.
Order No. HSK MK M A
610014-02610014-03610014-04
100100100
234
M10M12M16
120150170
Order No. HSK MK A D
610013-01610013-02610013-03610013-04
100100100100
1234
110120150170
25324048
M
45
HS
K-A
10
0
HSK-A 100
Morse taper adapter according to DIN 228A
BalancedG 6,3 at 8 min-1.000
Application:
Technical Design: Runout of outer taper to D1 ≤ 0,008 mm.
Morse taper adapter according to DIN 228B
BalancedG 6,3 at 8 min-1.000
Application:
Technical Design: Runout of outer taper to D1 ≤ 0,008 mm.
For holding morse taper tools with tang according to DIN 228A.
For holding morse taper tools with tang according to DIN 228B.
Order No. HSK Clamping range D1 A D2
610095-31610095-32
100100
1-131-16
122127
4356
46
HSK-A 100
HS
K-A
10
0
Short drill chuck
Fine balancedG 6,3 at 8 min-1.000
Wrench.
Application:
Technical Design:
For clamping tools with cylindrical shank. Also suitable for tools with internal coolant.
HS
K A
40
+ A
50
4050
4050
3442
2025
2026
3542
8,0510,54
912
1114
M12x1M16x1
HSK d1 d9 max. l1 f1 f2 min. b1 b2 b3 M
TOOL HOLDERSWITH SHAFT HSK A40+A50
d1
M
l1 f1
f2
d9b3 b1 b2
48
Order No. HSK
40 EXTRA SHORT
EXTRA SHORT
SHORT
SHORT
50
ER Clamping range A D
604002-001604002-002604002-003
604002-01604002-07
604002-02604002-03
605002-001605002-002605002-003
605002-01605002-02605002-03
404040
4040
4040
505050
505050
162532
1611
2532
162532
162532
1–10
1–10
1–16
1–16
2–20
1–101–7
1–162–20
2–20
1–101–162–20
607070
8080
80100
607080
100100100
28
28
4250
28
19
4250
4250
284250Sealed versions see
page 130.
49
HS
K-A
40
+ A
50
HSK-A 40 + A 50
Application:
Technical Design:
Includes:
Accessories:
For clamping tools with cylindrical shank in collets ER
Runout of outer taper to inner taper. Due to adjusted taper tolerances of the ER-Inner taper and the collet taper max. runout of ≤ 8µ at 2,5 X D.
Clamping nut.
See page 128.
Collet chuck ER
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Order No. HSK D1 A D2 L M1
40
50
604004-01604004-02604004-03604004-04604004-05604004-06
605004-01605004-02605004-03605004-04605004-06605004-08
40
505050505050
4040404040
6
6
8
8
10
10
12
12
14
16
16
20
606060707575
656565808080
25
25
28
28
35
35
42
42
42
48
48
52
35
35
35
35
41
41
48
48
48
51
51
53
M6
M6
M8
M8
M10
M10
M12
M12
M12
M14
M14
M16
M
SHORT
SHORT
50
HSK-A 40 + A 50
HS
K-A
40
+ A
50
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Endmill holder Weldon
Application:
Technical Design:
Includes:
Accessories:
For clamping tools with cylindrical shank according to DIN 1835 B.
Runout of outer taper to D1 ≤ 0,003 mm. Tolerance of bore H4 (more accurate as DIN).
Clamping screw.
See page 132.
Order No. HSK D1 A D2 D3 V L M40
50
604021-13604021-14604021-15604021-01604021-02604021-03604021-04604021-05604021-06
605021-13605021-14605021-15605021-01605021-02605021-03605021-04605021-05605021-06605021-07605021-08
404040404040404040
5050505050505050505050
3456810121416
34568101214161820
606060808080909090
60606080808590909595
100
121212212124242727
1212122121242427273333
171717272732323434
1717172727323234344242
---
101010101010
---
1010101010101010
---
373742484851
---
3737424848515153
---
M5M6
M8x1M10x1M10x1M12x1
---
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1
M
SHORT
SHORT
51
HS
K-A
40
+ A
50
HSK-A 40 + A 50
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
See page 133.
For clamping tools with cylindrical shank of solid carbide or HSS, tol. h6.Application:
Technical Design:
Includes:
Accessories:
Shrink fit holder
Made of special heat resistant steel. Suitable for inductive shrinking unit. With four additionalthreads for supplementary fine balancing. Runout of outer taper to D1 ≤ 0,003 mm.
Set screw.
Order No. D1 A D2 l1 M
604005-01604005-02
605005-01605005-02605005-03
4040
505050
1622
162227
5060
506060
3848
384860
1719
171921
M8M10
M8M10M12
HSK40
50
M
SHORT
52
HSK-A 40 + A 50
HS
K-A
40
+ A
50
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Shell mill holder
Application:
Technical Design:
Includes:
Accessories:
With extended flange. Runout of outer taper to D1 ≤ 0,006 mm.
Clamping screw and drive keys.
See page 134.
For adapting shell mills with transverse slot.
TOOL HOLDERSWITH SHANK HSK-FORM E
HS
K-F
OR
M E
4050
4051
3442
2025
2026
3542
M12x1M16x1
HSK d1 d9 max. l1 f1 f2 min. M
d1 d9
M
l1 f1
f2
53
Order No. HSK ER A D
404002-001404002-002404002-003
404002-01404002-02
405002-001405002-002405002-003
405002-01405002-03405002-04
404040
4040
505050
505050
111625
1625
162532
162532
606070
8080
607080
100100100
192842
2842
284250
284250
40
50
EXTRA SHORT
EXTRA SHORT
= 80
= 100
Sealed versions seepages 130, 131.
54
HSK-E 40 + E 50
HS
K-E
40
+ E
50
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Application:
Technical Design:
Includes:
Accessories:
For clamping tools with cylindrical shank in collets ER
Runout of outer taper to inner taper. Due to adjusted taper tolerances of the ER-Inner taper and the collet taper max. runout of ≤ 8µ at 2,5 X D.
Clamping nut.
See page 128.
Collet chuck ER
Order No. HSK D1 A D2 D3 V L M
404021-13404021-14404021-15404021-01404021-02404021-03404021-04404021-05404021-06
405021-13405021-14405021-15405021-01405021-02405021-03405021-04405021-05405021-06
404040404040404040
505050505050505050
3456810121416
3456810121416
606060808080909090
606060808085909095
121212212124242727
121212212124242727
171717272732323434
171717272732323434
---
101010101010
---
101010101010
---
373742484851
---
373742484851
---
M5M6
M8x1M10x1M10x1M12x1
---
M5M6
M8x1M10x1M10x1M12x1
50
40 SHORT
SHORT
M
55
HS
K-E
40
+ E
50
HSK-E 40 + E 50
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
See page 133.
For clamping tools with cylindrical shank of solid carbide or HSS, tol. h6.Application:
Technical Design:
Includes:
Accessories:
Shrink fit holder 4,5 °
Made of special heat resistant steel. Suitable for inductive shrinking unit. With four additionalthreads for supplementary fine balancing. Runout of outer taper to D1 ≤ 0,003 mm.
Set screw.
404051-513404051-514404051-515404051-51404051-52404051-53404051-54
40404040404040
345681012
80808080808080
9101112141618
16171819212325
Order No. HSK D1 A D2 D340
404051-13404051-14404051-15404051-01404051-02404051-03404051-04
404051-313404051-314404051-315404051-31404051-32404051-33404051-34
40404040404040
40404040404040
345681012
345681012
60606060606060
70707070707070
9101112141618
9101112141618
14151617192123
15161718202224
= 60
= 70
= 80
56
HSK-E 40 + E 50
HS
K-E
40
+ E
50
Fine balancedG 2,5 at 0 min-1.000
Shrink fit holder 3°
For clamping tools with cylindrical shank of solid carbide or HSS, tol. h6.Application:
Technical Design: Made of special heat resistant steel. Suitable for inductive shrinking unit. Runout of outer taper to D1 ≤ 0,003 mm.
Order No. HSK D1 A D2 D350
405051-13405051-14405051-15405051-01405051-02405051-03405051-04
405051-313405051-314405051-315405051-31405051-32405051-33405051-34
405051-513405051-514405051-515405051-51405051-52405051-53405051-54
50505050505050
50505050505050
50505050505050
345681012
345681012
345681012
70707070707070
80808080808080
100100100100100100100
9101112141618
9101112141618
9101112141618
14151617192123
15161718202224
17181920222426
= 70
= 80
= 100
57
HS
K-E
40
+ E
50
HSK-E 40 + E 50
For clamping tools with cylindrical shank of solid carbide or HSS, tol. h6.Application:
Technical Design: Made of special heat resistant steel. Suitable for inductive shrinking unit. Runout of outer taper to D1 ≤ 0,003 mm.
Fine balancedG 2,5 at 0 min-1.000
Shrink fit holder 3°
4050
68,4101,75
44,4569,85
63,5597,5
19,119,1
3535
3,23,2
M16M24
1725
50 16,1 22,8 25
80 25,7 35,5 37,7
SK l1 d1 d6 f3 f2 min. a M d3 d8 max. b l6 l7
TOOL HOLDERSWITH SHANK ISO 7388-1, FORM AD/AFFORMER DIN 69871, FORM AD/B
d1
M
l1
a
d8 d6
f3
f2
l6 l7
d3
b
DIN
69
871
58
Order No. SK ER Clamping range A D
714002-81714002-83714002-84
714002-61714002-63714002-64714002-65
714002-31714002-32714002-33714002-34714002-35
714002-01714002-02714002-03714002-04714002-05
40404040
4040404040
4040404040
404040
16
16
20
16
16
20
25
25
25
253240
3240
3240
32
1–101–13
1–131–10
1–10
1–10
1–16
1–16
1–16
1–16
2–20
2–20
2–20
2–20
4–26
4–26
4–26
7070707070
100100100100100
160160160160
200200200
2834425063
2834425063
28425063
284250
= 70
= 100
= 160
= 200
Sealed versions seepages 130, 131.
59
SK 40 DIN 69871Form AD/B
DIN
69
871
SK
40
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Application:
Technical Design:
Includes:
Accessories:
For clamping tools with cylindrical shank in collets ER.
Runout of outer taper to inner taper. Due to adjusted taper tolerances of the ER-Inner taper and the collet taper max. runout of ≤ 8µ at 2,5 X D.
Clamping nut.
See page 128.
Collet chuck ER
Order No. SK ER Clamping range A D
16 1–10 100 22
= 100
= 160
714002-41714002-43714002-45
404040
11 1–7 100 16
25 1–16 100 35
111625
1–71–10
160160160
1622351–16
404040
714002-42714002-44714002-46
Sealed versions seepages 130, 131.
60
SK 40 DIN 69871
DIN
69
871
SK
40
Form AD/B
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Collet chuck ER »Mini«
Application:
Technical Design:
Includes:
Accessories:
For clamping tools with cylindrical shank in collets ER.
Runout of outer taper to inner taper. Due to adjusted taper tolerances of the ER-Inner taper and the collet taper.max. runout of ≤ 8µ at 2,5 X D.
Clamping nut.
See page 128.
Order No. SK D1 A D2 L MSHORT
= 100
= 160
714004714004-02714004-03714004-04714004-05714004-06714004-07714004-08714004-09714004-10
-01
714004-31714004-32714004-33714004-34714004-35714004-36714004-38
714004-61714004-62714004-63714004-64714004-65714004-66714004-68
40404040404040404040
40404040404040
40404040404040
681012141618202532
681012141620
681012141620
5050505050636363
100100
100100100100100100100
160160160160160160160
25283542424848526572
25283542424852
25283542424852
35354148485151536064
35354148485153
35354148485153
M6M8
M10M12M12M14M14M16
M18x2M20x2
M6M8
M10M12M12M14M16
M6M8
M10M12M12M14M16
M
61
SK 40 DIN 69871Form AD/B
DIN
69
871
SK
40
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Endmill holder Weldon
Application:
Technical Design:
Includes:
Accessories:
For clamping tools with cylindrical shank according to DIN 1835 B.
Runout of outer taper to D1 ≤ 0,003 mm. Tolerance of bore H4 (more accurate as DIN).
Clamping screw.
See page 132
Order No. SK D1 A D2 L M
7140041-017140041-027140041-037140041-047140041-057140041-067140041-087140041-097140041-10
7140041-317140041-327140041-337140041-347140041-367140041-38
404040404040404040
404040404040
6
6
8
8
10
10
12
12
14
16
16
20
202532
50505050506363
100100
100100100100100
100
25
25
28
28
35
35
42
42
4248
48
52
52
6572
35
35
35
35
41
41
48
48
4851
5153
536064
M6
M6
M8
M8
M10
M10
M12
M12
M12
M14
M14
M16
M16M18x2M20x2
SHORT
= 100
M
62
SK 40 DIN 69871
DIN
69
871
SK
40
Form AD/B
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
See page 132.
Endmill holder Weldon »Cool Tool«
Application:
Technical Design:
Includes:
Accessories:
Particularly suitable for tools without internal coolant, and for machining at difficult positions with bad chip removal.
Two holes in the toolholder lead the coolant directly to the cutting edge. Coolant holes can be re-sealed with screws for the use of tools with internal coolant holes.
Clamping screw and 2 x M3-screws to plug the coolant holes if needed.
Order No. SK D1 A = 100
D2 D3 L M1 M2
714027-01714027-03714027-05714027-07714027-09714027-11714027-13714027-15
4040404040404040
68101214161820
100100100100100100100100
1315161719212325
2426282932343638
36,5 M6
M6M6M6M8M8M8
M8
36,540,545,545,548,548,550,5
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1
M1
M2
63
SK 40 DIN 69871Form AD/B
DIN
69
871
SK
40
BalancedG 6,3 at 8 min-1.000
See page 132.
Slim endmill holder Weldon
Application:
Technical Design:
Includes:
Accessories:
For clamping tools with cylindrical shank according to DIN 1835 B and E.
Runout of outer taper to D1 ≤ 0,003 mm. Tolerance of bore H4 (more accurate as DIN).
Special clamping screw (with ball head) and set screw.
Order No. SK D1 A D2 D3 V L M
SHORT
714021-13714021-14714021-15714021-01714021-02714021-03714021-04714021-05714021-06714021-07714021-08714021-09714021-10
40404040404040404040404040
345681012141618202532
8080808080808080808080
100100
12121221212424272733334444
17171727273232343442425353
---
10101010101010101010
---
37374248485151535963
---
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1M16x1
M
64
SK 40 DIN 69871
DIN
69
871
SK
40
Form AD/B
See page 133.
For clamping tools with cylindrical shank of solid carbide or HSS, tol. h6.
Extra short shrink fit holderscan be found on page 61,
shrink fit holders »Cool Tool«.
Long versions see next page >>
Application:
Technical Design:
Includes:
Accessories:
Shrink fit holder 4,5 °
Made of special heat resistant steel. Suitable for inductive shrinking unit. With four additionalthreads for supplementary fine balancing. Runout of outer taper to D1 ≤ 0,003 mm.
Set screw.
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Order No. SK D1 A D2 D3 V L M
= 160
= 200
= 130
= 120
404040404040404040
404040
40404040404040404040
404040404040404040
404040404040404040
6810121416182025
345
681012141618202532
6810121416182025
6810121416182025
120120120120120120120120120
130130130
130130130130130130130130130130
160160160160160160160160160
200200200200200200200200200
212124242727333344
212124
21212424272733334444
212124242727333344
212124242727333344
272732323434424253
272732
27273232343442425353
272732323434424253
272732323434424253
101010101010101010
---
10101010101010101010
101010101010101010
101010101010101010
373742484851515359
---
37374248485151535963
373742484851515359
373742484851515359
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1
---
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1M16x1
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1
714021-31714021-32714021-33714021-34714021-35714021-36714021-37714021-38714021-39
714021-513714021-514714021-515
714021-51714021-52714021-53714021-54714021-55714021-56714021-57714021-58714021-59714021-60
714021-61714021-62714021-63714021-64714021-65714021-66714021-67714021-68714021-69
714021-81714021-82714021-83714021-84714021-85714021-86714021-87714021-88714021-89
65
SK 40 DIN 69871Form AD/B
DIN
69
871
SK
40
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Shrink fit holder 4,5 °
Order No. SK D1 A D2 D3 V L M
7140219-037140219-047140219-067140219-087140219-09
4040404040
1012162025
6565656575
2626293545
-----
-----
4248515359
-----
EXTRASHORT
M
404040404040404040
6810121416182025
272732323434424253
101010101010101010
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1
714021-019714021-029714021-039714021-049714021-059714021-069714021-079714021-089714021-099
SHORT
714021-139*714021-149*714021-159*
404040
345
8080808080808080808080
100
262629212124242727333344
---
---
424851373742484851515359
---
* Cool tool holes can not be plugged.
66
SK 40 DIN 69871
DIN
69
871
SK
40
Form AD/B
See page 134.
Shrink fit holder »Cool Tool« 4,5°
Extra short version withoutlength setting screw
Long versions see next page >>
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Application:
Technical Design:
Includes:
Accessories:
Particularly suitable for tools without internal coolant, and for machining at difficult positions with bad chip removal.
Two holes in the toolholder lead the coolant directly to the cutting edge. Coolant holes can be re-sealed with screws for the use of tools wirh internal coolant holes.
Set screw and 2 x M3 screws to plug the coolant holes if needed.
Order No. SK D1 A D2 D3 V L M
4040404040404040
40404040404040404040404040
68101214161820
345681012141618202532
120120120120120120120120
2121242427273333
121212
44
212124242727333344
2727323234344242
171717
53
272732323434424253
1010101010101010
---
10101010101010101010
3737424848515153
---
63
373742484851515359
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1
---
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1M16x1
714021-319714021-329714021-339714021-349714021-359714021-369714021-379714021-389
714021-5139*714021-5149*714021-5159*714021-519714021-529714021-539714021-549714021-559714021-569714021-579714021-589714021-599714021-609
130130130130130130130130130130130130130
= 120
= 130
67
SK 40 DIN 69871Form AD/B
DIN
69
871
SK
40
* Cool tool holes can not be plugged.
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Shrink fit holder »Cool Tool« 4,5°
Order No. SK D1 A = 120
D2 D3 V L M
714021-413714021-414714021-415714021-41714021-42714021-43714021-44
40404040404040
345681012
120120120120120120120
999
15151818
25252530303232
---
10101010
---
37374248
---
M5M6
M8x1M10x1
M
68
SK 40 DIN 69871
DIN
69
871
SK
40
Form AD/B
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
See page 133.
Extended slim shrink fit holder
Application:
Technical Design:
Includes:
Accessories:
For clamping tools with cylindrical shank of solid carbide or HSS, tol. h6.
Made of special heat resistant steel. Suitable for inductive shrinking unit. Runout of outer taper to D1 ≤ 0,003 mm.
Set screw.
Order No. SK D1 A D2 D3
= 80
= 120
714051-01714051-02714051-03714051-04
714051-31714051-32714051-33714051-34
40404040
40404040
681012
681012
80808080
120120120120
12141618
12141618
19212325
23252729
69
SK 40 DIN 69871Form AD/B
DIN
69
871
SK
40
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Application:
Technical Design:
Shrink fit holder 3°
For clamping tools with cylindrical shank of solid carbide or HSS, tol. h6.
Made of special heat resistant steel. Suitable for inductive shrinking unit. Runout of outer taper to D1 ≤ 0,003 mm.
Order No. SK M
M
L D1 D2
714008-01714008-02714008-03714010-01714010-02714010-03714010-04714010-06714012-01714012-02714012-03714012-04714012-06714016-01714016-02714016-03714016-04714016-06
404040404040404040404040404040404040
M8M8M8
M10M10M10M10M10M12M12M12M12M12M16M16M16M16M16
255075255075
100150255075
100150255075
100150
13,813,813,8181818181821212121212929292929
152325232530354524303538482934354048
70
SK 40 DIN 69871
DIN
69
871
SK
40
Form AD/B
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
For clamping threaded shank end mill bodies.
Thread shank adapter
Application:
Technical Design: Runout of outer taper to D1 ≤ 0,005 mm.
100100100100
160160160
SHORT
= 100
= 160
7140051-017140051-027140051-037140051-04
7140051-317140051-327140051-337140051-34
M
71
SK 40 DIN 69871Form AD/B
DIN
69
871
SK
40
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Shell mill holder »Cool Tool«
Application:
Technical Design:
Includes:
Accessories andSpareparts:
For adapting shell mills with coolant through to the cutting edges.
See page 134.
With extended flange. Runout of outer taper to D1 ≤ 0,006 mm.
Clamping screw and drive keys.
Order No. SK D1 A D2 l1 l2 M
SHORT
= 100
= 160
714006-01714006-02714006-03714006-04
714006-31714006-32714006-33714006-34
714006-61714006-62714006-63714006-64
40404040
40404040
40404040
16222732
16222732
16222732
55555560
100100100100
160160160160
32404858
32404858
32404858
17192124
17192124
17192124
27313338
27313338
27313338
M
M8M10M12M16
M8M10M12M16
M8M10M12M16
72
SK 40 DIN 69871
DIN
69
871
SK
40
Form AD/B
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
For adapting shell mills with transverse and longitudinal groove.
See from page 135.
Application:
Technical Design:
Includes:
Accessories:
Combi shell mill holder
Runout of outer taper to D1 ≤ 0,006 mm.
Clamping screw, drive keys and adjusting spring.
Order No. SK A D2
714095-01714095-02
714095-31714095-32
40
40
40
40
1-131-16
1-131-16
8187
8187
4556
4556
FORM A without internal coolant
FORM AD for tools with internal coolant
73
SK 40 DIN 69871Form AD/B
DIN
69
871
SK
40
Short drill chuck
Wrench.
Application:
Technical Design:
For clamping tools with cylindrical shank. Also suitable for tools with internal coolant.
BalancedG 6,3 at 8 min-1.000
Clamping range D1
Order No. SK ER Clamping range A D
715002-61715002-62715002-63715002-64
715002-01715002-02715002-03715002-04
715002-31715002-32715002-33715002-34
50505050
50505050
50505050
16
16
1625
253240
253240
3240
1–10
1–10
1–10
1–16
1–16
1–16
2–20
2–20
2–20
4–26
4–26
4–26
70707070
100100100100
160160160160
28425063
28425063
28425063
= 70
= 100
= 160
75
DIN
69
871
SK
50
SK 50 DIN 69871Form AD/B
Sealed versions seepages 130, 131.
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Application:
Technical Design:
Includes:
Accessories:
For clamping tools with cylindrical shank in collets ER
Runout of outer taper to inner taper. Due to adjusted taper tolerances of the ER-Inner taper and the Collet taper max. runout of ≤ 8µ at 2,5 X D.
Clamping nut
See page 128.
Collet chuck ER
Order No. SK D1 A D2 L M1SHORT
= 100
= 160
715004715004-02715004-03715004-04715004-05715004-06715004-08715004-09715004-10
-01
715004-31715004-32715004-33715004-34715004-35715004-36715004-38715004-39
715004-61715004-62715004-63715004-64715004-65715004-66715004-68715004-69715004-70
505050505050505050
505050505050505050
5050505050505050
6810121416202532
68101214162025
6810121416202532
6363636363636380
100
100100100100100100100100
160160160160160160160160160
252835424248526572
2528354242485265
252835424248526572
353541484851536064
3535414848515360
353541484851536064
M6M8
M10M12M12M14M16
M18x2M20x2
M6M8
M10M12M12M14M16
M18x2
M6M8
M10M12M12M14M16
M18x2M20x2
M
76
SK 50 DIN 69871Form AD/B
DIN
69
871
SK
50
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Endmill holder Weldon
Application:
Technical Design:
Includes:
Accessories:
For clamping tools with cylindrical shank according to DIN 1835 B.
Runout of outer taper to D1 ≤ 0,003 mm. Tolerance of bore H4 (more accurate as DIN).
Clamping screw.
See page 132
Order No. SK D1 A SHORT
D2 L M
7150041-017150041-027150041-037150041-047150041-057150041-067150041-077150041-087150041-097150041-10
50505050505050505050
68
1012141618202532
636363636363636380
100
25283542424848526572
35354148485151536064
M6M8
M10M12M12M14M14M16
M18x2M20x2
M
77
DIN
69
871
SK
50
SK 50 DIN 69871Form AD/B
See page 132.
Endmill holder Weldon »Cool Tool«
Application:
Technical Design:
Includes:
Accessories:
Particularly suitable for tools without internal coolant, and for machining at difficult positions with bad chip removal.
Two holes in the toolholder lead the coolant directly to the cutting edge. Coolant holes can be re-sealed with screws for the use of tools with internal coolant holes.
Clamping screw and 2 x M3-screws to plug the coolant holes if needed.
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Order No. SK D1 A D2 D3 V L M
SHORT
715021-01715021-02715021-03715021-04715021-05715021-06715021-07715021-08715021-09715021-10
50505050505050505050
681012141618202532
8080808080808080
100100
21212424272733334444
27273232343442425353
10101010101010101010
37374248485151535963
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1M16x1
M
78
SK 50 DIN 69871Form AD/B
DIN
69
871
SK
50
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Long versions see next page >>
See page 133.
For clamping tools with cylindrical shank of solid carbide or HSS, tol. h6.Application:
Technical Design:
Includes:
Accessories:
Made of special heat resistant steel. Suitable for inductive shrinking unit. With four additionalthreads for supplementary fine balancing. Runout of outer taper to D1 ≤ 0,003 mm.
Set screw.
Shrink fit holder 4,5 °
Order No. SK D1 A D2 D3 V L M
= 120
= 160
= 200
= 130
681012141618202532
681012141618202532
681012141618202532
681012141618202532
120120120120120120120120120120
160160160160160160160160160160
200200200200200200200200200200
130130130130130130130130130130
21212424272733334444
21212424272733334444
21212424272733334444
21212424272733334444
27273232343442425353
27273232343442425353
27273232343442425353
27273232343442425353
10101010101010101010
10101010101010101010
10101010101010101010
10101010101010101010
37374248485151535963
37374248485151535963
37374248485151535963
37374248485151535963
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1M16x1
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1M16x1
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1M16x1
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1M16x1
715021-31715021-32715021-33715021-34715021-35715021-36715021-37715021-38715021-39715021-40
715021-51715021-52715021-53715021-54715021-55715021-56715021-57715021-58715021-59715021-60
715021-61715021-62715021-63715021-64715021-65715021-66715021-67715021-68715021-69715021-70
715021-81715021-82715021-83715021-84715021-85715021-86715021-87715021-88715021-89715021-90
50505050505050505050
50505050505050505050
50505050505050505050
50505050505050505050
79
DIN
69
871
SK
50
SK 50 DIN 69871Form AD/B
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Shrink fit holder 4,5 °
Order No. SK D1 A SHORT
D2 D3 V L M
715021-019715021-029715021-039715021-049715021-059715021-069715021-079715021-089715021-099715021-109
50505050505050505050
681012141618202532
8080808080808080
100100
21212424272733334444
27273232343442425353
10101010101010101010
37374248485151535963
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1M16x1
M
80
SK 50 DIN 69871Form AD/B
DIN
69
871
SK
50
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
See page 134.
Shrink fit holder »Cool Tool« 4,5 °
Application:
Technical Design:
Includes:
Accessories:
Particularly suitable for tools without internal coolant, and for machining at difficult positions with bad chip removal.
Two holes in the toolholder lead the coolant directly to the cutting edge. Coolant holes can be re-sealed with screws for the use of tools wirh internal coolant holes.
Set screw and 2 x M3 screws to plug the coolant holes if needed.
Order No. SK D1 A D2 l1 M
SHORT
= 100
= 160
7150051-027150051-037150051-047150051-05
7150051-327150051-337150051-347150051-35
7150051-6217150051-6317150051-6417150051-651
50505050
50505050
50505050
22273240
22273240
22273240
35353550
100100100100
160160160160
48607889
48607889
48607889
19212427
19212427
19212427
M10M12M16M20
M10M12M16M20
M10M12M16M20
M
81
DIN
69
871
SK
50
SK 50 DIN 69871Form AD/B
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Shell mill holder »Cool Tool«
Application:
Technical Design:
Includes:
Accessories andSpareparts:
For adapting shell mills with coolant through to the cutting edges.
See page 134.
With extended flange. Runout of outer taper to D1 ≤ 0,006 mm.
Clamping screw and drive keys.
Order No. SK D1 A D2 l1 l2
= 55
= 100
= 160
715006-02715006-03715006-04715006-05
715006-32715006-33715006-34715006-35
715006-62715006-63715006-64715006-65
50505050
50505050
50505050
22273240
22273240
22273240
55555555
100100100100
160160160160
40485870
40485870
40485870
19212427
19212427
19212427
31333841
31333841
31333841
M
M
M10M12M16M20
M10M12M16M20
M10M12M16M20
82
SK 50 DIN 69871Form AD/B
DIN
69
871
SK
50
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
For adapting shell mills with transverse and longitudinal groove.
See from page 135.
Application:
Technical Design:
Includes:
Accessories:
Combi shell mill holder
Runout of outer taper to D1 ≤ 0,006 mm.
Clamping screw, drive keys and adjusting spring.
83
DIN
69
871
SK
50
SK 50 DIN 69871Form AD/B
Short drill chuck
BalancedG 6,3 at 8 min-1.000
Wrench.
Application:
Technical Design:
For clamping tools with cylindrical shank. Also suitable for tools with internal coolant.
Order No. SK A D2
715095-01715095-02
715095-31715095-32
50
50
50
50
1-131-16
1-131-16
9197
9197
4356
4356
FORM A without internal coolant
FORM AD for tools with internal coolant
Clamping range D1
TOOL HOLDERSWITH SHANK ISO 7388-2, FORM JD/JFFORMER MAS-BT, FORM AD/B
MA
S-B
T
30*4050
*Version AD.
48,465,4
101,8
31,7544,45
69,85
4663
100
2025
35
22
3
M12M16
M24
12,517
25
16,116,1
25,7
16,322,6
35,4
BT l1 d1 d5 f a M d3 b l
84
d1 d5
b
d3 M
a
fl1
Order No. BT ER Clamping range A D
753002-01753002-02753002-03753002-04
753002-22753002-23753002-24
753002-31753002-32753002-33753002-34
30303030
303030
30303030
11162025
162025
11162025
1–7
1–7
1–10
1–10
1–10
1–131–16
1–131–16
1–131–16
60606060
808080
19
28
28
3442
3442
100100100100
19283442
SHORT
LONG
85
BT
30
BT 30 Form AD
Sealed versions seepages 130,131.
Application:
Technical Design:
Includes:
Accessories:
For clamping tools with cylindrical shank in collets ER
Runout of outer taper to inner taper. Due to adjusted taper tolerances of the ER-Inner taper and the collet taper max. runout of ≤ 8µ at 2,5 X D.
Clamping nut.
See page 128.
Collet chuck ER
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Order No. BT D1 A D2 D3 V L M
SHORT
753021-13753021-14753021-15753021-01753021-02753021-03753021-04753021-05753021-06753021-07753021-08
3030303030303030303030
34568101214161820
8080808080808080809090
1212122121242427273333
1717172727323234344242
---
1010101010101010
---
3737424848515153
---
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1
M
86
BT
30
BT 30 Form AD
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
See page 133.
For clamping tools with cylindrical shank of solid carbide or HSS, tol. h6.Application:
Technical Design:
Includes:
Accessories:
Shrink fit holder 4,5 °
Made of special heat resistant steel. Suitable for inductive shrinking unit. With four additionalthreads for supplementary fine balancing. Runout of outer taper to D1 ≤ 0,003 mm.
Set screw.
Order No. BT ER Clamping range A D
754002-01754002-03754002-04754002-05
754002-31754002-33754002-34
754002-61754002-63754002-64
40404040
404040
404040
16253240
162532
162532
1–10
1–10
1–10
1–16
1–16
1–16
2–204–26
2–20
2–20
70707070
28425063
100100100
160160160
284250
284250
= 70
= 100
= 160
87
BT
40
BT 40 Form AD/B
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Sealed versions seepages 130,131.
Application:
Technical Design:
Includes:
Accessories:
For clamping tools with cylindrical shank in collets ER
Runout of outer taper to inner taper. Due to adjusted taper tolerances of the ER-Inner taper and the collet taper max. runout of ≤ 8µ at 2,5 X D.
Clamping nut.
See page 128.
Collet chuck ER
Order No. BT ER Clamping range A D1
16 1–10 100 22
= 100
= 160
754002-41754002-43754002-45
404040
11 1–7 100 16
25 1–16 100 35
111625
1–71–10
160160160
1622351–16
404040
754002-42754002-44754002-46
88
BT
40
BT 40Form AD/B
Sealed versions seepages 130,131.
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Collet chuck ER »Mini«
Application:
Technical Design:
Includes:
Accessories:
For clamping tools with cylindrical shank in collets ER.
Runout of outer taper to inner taper. Due to adjusted taper tolerances of the ER-Inner taper and the collet taper.max. runout of ≤ 8µ at 2,5 X D.
Clamping nut.
See page 128.
Order No. BT D1 A D2 L MSHORT
= 100
754004-01754004-02754004-03754004-04754004-05754004-06754004-07754004-08754004-09754004-10
754004-31754004-32754004-33754004-34754004-36754004-38
40404040404040404040
404040404040
681012141618202532
6810121620
505063636363636390
100
100100100100100100
25283542424848526572
252835424852
35354148485151536064
353541485153
M6M8
M10M12M12M14M14M16
M18x2M20x2
M6M8
M10M12M14M16
M
89
BT
40
BT 40 Form AD/B
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Endmill holder Weldon
Application:
Technical Design:
Includes:
Accessories:
For clamping tools with cylindrical shank according to DIN 1835 B.
Runout of outer taper to D1 ≤ 0,003 mm. Tolerance of bore H4 (more accurate as DIN).
Clamping screw.
See page 132.
Order No. BT D1 A D2 D3 V L M
SHORT
754021-13754021-14754021-15754021-01754021-02754021-03754021-04754021-05754021-06754021-07754021-08754021-09
404040404040404040404040
3456810121416182025
9090909090909090909090
100
121212212124242727333344
171717272732323434424253
---
101010101010101010
---
373742484851515359
---
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1
M
90
BT
40
BT
40
BT 40 Form AD/B
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Long versions see next page >>
See page 133.
For clamping tools with cylindrical shank of solid carbide or HSS, tol. h6.Application:
Technical Design:
Includes:
Accessories:
Made of special heat resistant steel. Suitable for inductive shrinking unit. With four additionalthreads for supplementary fine balancing. Runout of outer taper to D1 ≤ 0,003 mm.
Set screw.
Shrink fit holder 4,5 °
Order No. BT D1 A D2 D3 V L M
= 120
= 160
= 200
= 130
6810121416182025
6810121416182025
6810121416182025
6810121416182025
120120120120120120120120120
160160160160160160160160160
200200200200200200200200200
130130130130130130130130130
212124242727333344
212124242727333344
212124242727333344
212124242727333344
272732323434424253
272732323434424253
272732323434424253
272732323434424253
101010101010101010
101010101010101010
101010101010101010
101010101010101010
373742484851515359
373742484851515359
373742484851515359
373742484851515359
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1
754021-31754021-32754021-33754021-34754021-35754021-36754021-37754021-38754021-39
754021-51754021-52754021-53754021-54754021-55754021-56754021-57754021-58754021-59
754021-61754021-62754021-63754021-64754021-65754021-66754021-67754021-68754021-69
754021-81754021-82754021-83754021-84754021-85754021-86754021-87754021-88754021-89
404040404040404040
404040404040404040
404040404040404040
404040404040404040
91
BT
40
BT 40 Form AD/B
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Shrink fit holder 4,5 °
Order No. BT D1 A= SHORT
D2 D3 V L M
754021-019754021-029754021-039754021-049754021-059754021-069754021-079754021-089754021-099
404040404040404040
6810121416182025
9090909090909090
100
212124242727333344
272732323434424253
101010101010101010
373742484851515359
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1
M
92
BT
40
BT
40
BT 40 Form AD/B
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
See page 132.
Shrink fit holder »Cool Tool« 4,5 °
Application:
Technical Design:
Includes:
Accessories:
Particularly suitable for tools without internal coolant, and for machining at difficult positions with bad chip removal.
Two holes in the toolholder lead the coolant directly to the cutting edge. Coolant holes can be re-sealed with screws for the use of tools with internal coolant holes.
Set screw and 2 x M3 screws to plug the coolant holes if needed.
Order No. BT D1 A D2 l1 M
7540051-017540051-027540051-037540051-047540051-05
7540051-317540051-327540051-337540051-34
4040404040
40404040
1622273240
16222732
3535355050
100100100100
3848607889
38486078
1719212427
17192124
M8M10M12M16M20
M8M10M12M16
93
BT
40
BT 40 Form AD/B
M
SHORT
= 100
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Shell mill holder »Cool Tool«
Application:
Technical Design:
Includes:
Accessories andSpareparts:
For adapting shell mills with coolant through to the cutting edges.
See page 134.
With extended flange. Runout of outer taper to D1 ≤ 0,006 mm.
Clamping screw and drive keys.
Order No. BT D1 A D2 l1 l2 M
754006-01754006-02754006-03754006-04
40404040
16222732
55555560
32404858
17192124
27313338
M
M8M10M12M16
94
BT
40
BT
40
BT 40 Form AD/B
SHORT
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
For adapting shell mills with transverse and longitudinal groove.
See page 135.
Application:
Technical Design:
Includes:
Accessories:
Combi shell mill holder
Runout of outer taper to D1 ≤ 0,006 mm.
Clamping screw, drive keys and adjusting spring.
Order No. BT Clamping range A D2
754095-01754095-02
754095-31754095-32
40
40
40
40
1-131-16
1-131-16
8995
8995
4556
4556
95
BT
40
BT 40
Short drill chuck
BalancedG 6,3 at 8 min-1.000
Wrench.
Application:
Technical Design:
For clamping tools with cylindrical shank. Also suitable for tools with internal coolant.
FORM A without internal coolant
FORM AD for tools with internal coolant
Order No. BT ER A D Clamping range
755002-01755002-02755002-03755002-04
755002-31755002-32755002-33755002-34
755002-61755002-62755002-63755002-64
50505050
50505050
50505050
16253240
16253240
16253240
70707080
100100100100
160160160160
28425063
28425063
28425063
1–101–162–204–26
1–101–162–204–26
1–101–162–204–26
96
BT
50
BT 50Form AD/B
SHORT
= 100
= 160
Sealed versions seepages 130,131.
Application:
Technical Design:
Includes:
Accessories:
For clamping tools with cylindrical shank in collets ER
Runout of outer taper to inner taper. Due to adjusted taper tolerances of the ER-Inner taper and the collet taper max. runout of ≤ 8µ at 2,5 X D.
Clamping nut.
See page 128.
Collet chuck ER
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Order No. BT D1 A D2 L M
755004-01755004-02755004-03755004-04755004-06755004-08755004-09755004-10
5050505050505050
68101216202532
636370808080
100105
2528354248526572
3535414851536064
M6M8
M10M12M14M16
M18x2M20x2
M
97
BT
50
BT 50 Form AD/B
SHORT
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Endmill holder Weldon
Application:
Technical Design:
Includes:
Accessories:
For clamping tools with cylindrical shank according to DIN 1835 B.
Runout of outer taper to D1 ≤ 0,003 mm. Tolerance of bore H4 (more accurate as DIN).
Clamping screw.
See page 132.
M
98
BT
50
BT 50 Form AD/B
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Long versions see next page >>
See page 133.
For clamping tools with cylindrical shank of solid carbide or HSS, tol. h6.Application:
Technical Design:
Includes:
Accessories:
Shrink fit holder 4,5 °
Made of special heat resistant steel. Suitable for inductive shrinking unit. With four additionalthreads for supplementary fine balancing. Runout of outer taper to D1 ≤ 0,003 mm.
Set screw.
Order No. BT D1 A D2 D3 V L M= 100
= 160
= 200
= 130
681012141618202532
681012141618202532
681012141618202532
681012141618202532
100100100100100100100100100100
160160160160160160160160160160
200200200200200200200200200200
130130130130130130130130130130
21212424272733334444
21212424272733334444
21212424272733334444
21212424272733334444
27273232343442425353
27273232343442425353
27273232343442425353
27273232343442425353
10101010101010101010
10101010101010101010
10101010101010101010
10101010101010101010
37374248485151535963
37374248485151535963
37374248485151535963
37374248485151535963
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1M16x1
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1M16x1
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1M16x1
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1M16x1
755021-01755021-02755021-03755021-04755021-05755021-06755021-07755021-08755021-09755021-10
755021-51755021-52755021-53755021-54755021-55755021-56755021-57755021-58755021-59755021-60
755021-61755021-62755021-63755021-64755021-65755021-66755021-67755021-68755021-69755021-70
755021-81755021-82755021-83755021-84755021-85755021-86755021-87755021-88755021-89755021-90
50505050505050505050
50505050505050505050
50505050505050505050
50505050505050505050
99
BT
50
BT 50 Form AD/B
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Shrink fit holder 4,5 °
Order No. BT D1 A D2 l1 M
7550051-027550051-037550051-047550051-05
7550051-327550051-337550051-34
50505050
505050
22273240
222732
55555555
100100100
48607889
486078
19212427
192124
M8M10M12M16
M8M10M12
M
= 100
= 55
100
BT
50
BT 50 Form AD/B
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Shell mill holder »Cool Tool«
Application:
Technical Design:
Includes:
Accessories andSpareparts:
For adapting shell mills with coolant through to the cutting edges.
See page 134.
With extended flange. Runout of outer taper to D1 ≤ 0,006 mm.
Clamping screw and drive keys.
Order No. BT D1 A D2 l1 l2 M
755006-02755006-03755006-04755006-05
50505050
22273240
70707070
40485870
19212427
31333841
M
M8M10M12M16
= 70
101
BT
50
BT 50 Form AD/B
For adapting shell mills with transverse and longitudinal groove.
See page 135.
Application:
Technical Design:
Includes:
Accessories:
Combi shell mill holder
Runout of outer taper to D1 ≤ 0,006 mm.
Clamping screw, drive keys and adjusting spring.
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Order No. BT Clamping range A D2
755095-01755095-02
5050
1-131-16
111116
4550
102
BT
50
BT 50 Form AD
Short drill chuck
BalancedG 6,3 at 8 min-1.000
Wrench.
Application:
Technical Design:
For clamping tools with cylindrical shank. Also suitable for tools with internal coolant.
104
The size designation of our toolholders CORUM with nominal diameter 63 mm is:
C6
We are proud to present our new generation of tool holders: CORUM. The shape of the polygonal section, similar to a heart, was the inspiration for the name (»Cor«, lat. for »heart«).
With this expansion in our product range, we offer anattractive alternative in the polygon toolholders. Accordingto our slogan “the µ-maker”, we guarantee also with thesetoolholders highest precision and quality. In addition to the perfect polygonal shape our toolholders convince by many thoughtful details:
• Fine balanced design G2,5 25.000/min.• Bore for Balluff-Chip as standard• Hard reworked functional surfaces on the inside geometry, thereby the clamping shoulder concentricity is more accurate than ISO standard (2)• Many extended versions as standard.
X -20,0000 -10,0000 0,0000 10,0000 20,0000
-20,0000
-10,0000
0,0000
10,0000
20,0000
10 µm
X
Y
Y
1000 : 1
x’ = Dm/2 x cos y - 2 x e cos(2y) + e x cos(4y)x’ = Dm/2 x cos y - 2 x e cos(2y) + e x cos(4y)
1
2
The certified polygon shape of our CORUM tool holder by an independent
testing company. Please note the almost perfect overlap of the reference and
actual geometry.
CORUM – Tool holders with polygon shank
TOOL HOLDERSWITH POLYGONAL SHANK CORUM
PO
LY
GO
NA
L S
HA
FT
CO
RU
M
C d1 l2 l3 M
d1 M
l2 l3
5
8
4
6
50
80
40
63
30
48
24
38
20
30
20
22
M16x1,5
M20x2
M14x1,5
M20x2
105
Order No. C ER A D2
306302-01306302-02306302-03306302-04
304002-01304002-02304002-03
305002-01305002-02305002-03
306302-31306302-32306302-33306302-34
306302-52306302-53
6666
444
555
6666
66
16253240
162532
162532
16253240
2532
60606065
705555
555560
100100100100
130130
28425063
284250
284250
28425063
4250
306302-61306302-62306302-63
308002-01308002-02308002-03308002-04
666
8888
162532
16253240
160160160
65707070
284250
28425063
SHORT
SHORT
SHORT
= 100
= 130
= 160
SHORT
106
CORUM
CO
RU
M
Application:
Technical Design:
Includes:
Accessories:
For clamping tools with cylindrical shank in collets ER
Runout of outer taper to inner taper. Due to adjusted taper tolerances of the ER-Inner taper and the collet taper max. runout of ≤ 8µ at 2,5 X D.
Clamping nut.
See page 128.
Collet chuck ER
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Sealed versions seepages 130,131.
Order No. C ER A D2
306302-21306302-22
306302-23306302-24
66
66
1116
1116
100100
160160
1622
1622
= 100
= 160
107
CORUM
CO
RU
MC
OR
UM
Sealed versions seepages 130,131.
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Collet chuck ER »Mini«
Application:
Technical Design:
Includes:
Accessories:
For clamping tools with cylindrical shank in collets ER.
Runout of outer taper to inner taper. Due to adjusted taper tolerances of the ER-Inner taper and the collet taper.max. runout of ≤ 8µ at 2,5 X D.
Clamping nut.
See page 128.
M1
108
CO
RU
M
CORUM
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Endmill holder Weldon
Application:
Technical Design:
Includes:
Accessories:
For clamping tools with cylindrical shank according to DIN 1835 B.
Runout of outer taper to D1 ≤ 0,003 mm. Tolerance of bore H4 (more accurate as DIN).
Clamping screw.
See page 132.
Order No. C D1 A D2 M
306304-01306304-02306304-03306304-04306304-05306304-06306304-07306304-08306304-09306304-10
308004-01308004-02308004-03308004-04308004-05308004-06308004-07308004-08308004-09308004-10
306304-31306304-32306304-33306304-34306304-35306304-36306304-37306304-38
304004-01304004-02304004-03304004-04304004-05304004-06
305004-01305004-02305004-03305004-04305004-05305004-06305004-07305004-08305004-09
6666666666
8888888888
66666666
444444
555555555
6
6
6
6
6
8
8
8
8
8
10
10
10
10
10
12
12
12
12
12
14
14
14
14
14
1618202532
1618202532
161820
16
16182025
55556060606565658090
70707070707070708080
100100100100100100100100
505050555555
505055606060606080
25
25
25
25
25
28
28
28
28
28
35
35
35
35
35
42
42
42
42
42
444850526572
444850526572
44485052
4448
4448505265
M6
M6
M6
M6
M6
M8
M8
M8
M8
M8
M10
M10
M10
M10
M10
M12
M12
M12
M12
M12
M12
M12
M12
M12
M12
M14M14M16
M18x2M20x2
M14M14M16
M18x2M20x2
M14M14M16
M14
M14M14M16
M18x2SHORT
SHORT
SHORT
= 100
SHORT
109
CORUM
CO
RU
MC
OR
UM
Endmill holder Weldon
Order No. C D A D2 L M1 M2
6306309-01306309-02306309-03306309-04306309-05306309-06306309-07306309-08306309-09306309-10
6 68
1012141618202532
75757580808080859095
25283542444950526572
36,536,540,545,545,548,548,550,556,560,5
M6 M5M8 M6
M10 M8M12 M10M12 M10M14 M12M14 M12M16 M16
M18x2 M20M20x2 M20
66666666
M1
M2
SHORT
110
CO
RU
M
CORUM
BalancedG 6,3 at 8 min-1.000
See page 133.
Endmill holder Whistle Notch
For clamping tools with cylindrical shank according to DIN 1835 E. Application:
Technical Design:
Includes:
Accessories:
Runout of outer taper to D1 ≤ 0,003 mm. Tolerance of bore H4 (more accurate as DIN).
Clamping screw and set screw.
M1
Order No. C D1 A D2 D3 V L M1
304021-01304021-02304021-03304021-04304021-05304021-06304021-07304021-08
305021-01305021-02305021-03305021-04305021-05305021-06305021-07305021-08305021-09
44444444
555555555
68101214161820
6810121416182025
7575757580808085
757575758080808590
2112122121242427
212124242727333344
2717172727323234
272732323434424253
1010101010101010
101010101010101010
3636424747505052
363642474750505258
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1
306321-13306321-14306321-15306321-01306321-02306321-03306321-04306321-05306321-06306321-07306321-08306321-09306321-10
6666666666666
345681012141618202532
80808080808080858585859095
12121221212424272733334444
17171727273232343440405253
---
10101010101010101010
---
36364247475050525862
---
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1M16x1
SHORT
SHORT
SHORT
111
CORUM
CO
RU
MC
OR
UM
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Long versions see next page >>
See page 133.
For clamping tools with cylindrical shank of solid carbide or HSS, tol. h6.Application:
Technical Design:
Includes:
Accessories:
Shrink fit holder 4,5 °
Made of special heat resistant steel. Suitable for inductive shrinking unit. With four additionalthreads for supplementary fine balancing. Runout of outer taper to D1 ≤ 0,003 mm.
Set screw.
Order No. C D1 A = 120
= 160
D2 D3 V L M1
306321-31306321-32306321-33306321-34306321-35306321-36306321-37306321-38306321-39306321-40
306321-61306321-62306321-63306321-64306321-65306321-66306321-67306321-68306321-69306321-70
308021-01308021-02308021-03308021-04308021-05308021-06308021-07308021-08308021-09308021-10
6666666666
6666666666
8888888888
681012141618202532
681012141618202532
681012141618202532
120120120120120120120120120120
160160160160160160160160160160
80808080858585859095
21212424272742424444
21212424272742424444
21212424272742424444
27273232343444445353
27273232343444445353
27273232343444445353
10101010101010101010
10101010101010101010
10101010101010101010
36364247475050525858
36364247475050525858
36364247475050525858
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1M16x1
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1M16x1
M5M6
M8x1M10x1M10x1M12x1M12x1M16x1M16x1M16x1
SHORT
112
CORUM
CO
RU
M
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
See page 133.
For clamping tools with cylindrical shank of solid carbide or HSS, tol. h6.Application:
Technical Design:
Includes:
Accessories:
Shrink fit holder 4,5 °
Made of special heat resistant steel. Suitable for inductive shrinking unit. With four additionalthreads for supplementary fine balancing. Runout of outer taper to D1 ≤ 0,003 mm.
Set screw.
Order No. D1 A D2 l1 M
306305-21306305-22306305-23306305-24
305005-21305005-22305005-23305005-24
304005-21304005-22
306305-211306305-221306305-231306305-241
308005-21308005-22308005-23308005-24
6666
5555
44
6666
8888
16222732
16222732
1622
16222732
16222732
40252525
35252540
3225
65656565
50505060
38486063
38486063
3848
17192124
17192124
1719
17192124
17192124
38486063
38486063
C
M8M10M12M16
M8M10M12M16
M8M10
M8M10M12M16
M8M10M12M16
M
SHORT
SHORT
SHORT
SHORT
= 65
113
CORUM
CO
RU
MC
OR
UM
or max. residual imbalance ≤ 1 gmm
Fine balancedG 2,5 at min-125.000
Shell mill holder »Cool Tool«
Application:
Technical Design:
Includes:
Accessories andSpareparts:
For adapting shell mills with coolant through to the cutting edges.
See page 134.
With extended flange. Runout of outer taper to D1 ≤ 0,006 mm.
Clamping screw and drive keys.
ACCESSORIES AND SPARE PARTS
AC
CE
SS
OR
IES
AN
D S
PA
RE
PA
RT
S
114
Order No. D ER A
119-49119-50119-51
162025
111620
169163164
COLLET CHUCK EXTENSIONS
Collet chuck extensions »Mini«
SHORT
115
Application:
Includes:
Accessories: See page 133.
Clamping nut.
For the extension of tool holders. Cylindrical shank can be clamped in end mill holder or collet chuck.
AC
CE
SS
OR
IES
Order No. D3 D1 D2 A
= 160
D 3
2112-132112-142116-132116-142116-152116-012120-152120-012120-022125-022125-032125-042125-052125-062132-032132-042132-052132-062132-072132-08
1212161616162020202525252525323232323232
343456568810121416101214161820
88
101010101414141920202022242427272727
160160160160160160160160160160160160160160160160160160160160
Application: For the extension of tool holders. Cylindrical shank can be clamped in end mill holder or collet chuck.
Shrink fit extensions without length adjustment screw
116
SHRINK FIT EXTENSIONS
AC
CE
SS
OR
IES
Order No. D3 D1 D2 A
2120-612120-622125-622125-632125-642125-652125-662132-632132-642132-652132-662132-68
202025252525253232323232
688101214161012141620
141419202020222424272727
300300300300300300300300300300300300
= 300
D 3
117
SHRINK FIT EXTENSIONS
Shrink fit extensions without length adjustment screw
Application: For the extension of tool holders. Cylindrical shank can be clamped in end mill holder or collet chuck.
AC
CE
SS
OR
IES
Order No. D3 D1 D2 A
2120-0192125-0292125-0392132-0392132-0492132-0592132-069
20252532323232
681010121416
14192024242727
160160160160160160160
D 3
= 160
118
Shrink fit extensions »cool tool« without length adjustment screw
Application: For the extension of tool holders. Cylindrical shank can be clamped in end mill holder or collet chuck.
AC
CE
SS
OR
IES
SHRINK FIT EXTENSIONS
Order No. D3 D1 D2 A V L M
211621-01212021-01212021-02212521-02212521-03212521-04212521-05212521-06213221-03213221-04213221-05213221-06213221-07213221-08
1620202525252525323232323232
668810121416101214161820
1014141920202022242427272727
160160160160160160160160160160160160160160
1010101010101010101010101010
3737373742484851424848515153
M5M5M6M6
M8x1M10x1M10x1M12x1M8x1
M10x1M10x1M12x1M12x1M16x1
M
D 3
= 160
119
AC
CE
SS
OR
IES
Shrink fit extensions with length adjustment screw
Application:
Includes:
Accessories: See page 133.
Clamping screw.
For the extension of tool holders. Cylindrical shank can be clamped in end mill holder or collet chuck.
SHRINK FIT EXTENSIONS
Order No.
Order No.
7124-017124-21
7124-01B7124-21B
M16M24
M16M24
4050
4050
1928
1928
1421
1421
1725
1725
5474
5474
2634
2634
2025
2025
SK
SK
D1
D1
D2
D2
D3
D3
L1
L1
L2
L2
L3
L3
M
M
15°
Pull stud DIN 69872 Form A, with through hole
Pull stud DIN 69872 Form B, without through hole, with O-Ring on the collar
120
PULL STUD
AC
CE
SS
OR
IES
Order No.
Order No.
7425-117425-31
7425-11B7425-31B
M16M24
M16M24
4050
4050
18,9529,1
18,9529,1
12,9519,6
12,9519,6
1725
1725
44,565,5
44,565,5
16,425,55
16,425,55
11,517,95
11,517,95
SK
SK
D1
D1
D2
D2
D3
D3
L1
L1
L2
L2
L3
L3
M
M
Pull stud ISO 7388 B with through hole
Pull stud ISO 7388 B without through hole, with O-Ring on the collar
121
PULL STUD
AC
CE
SS
OR
IES
Order No.
7526-117526-31
M16M24
4050
1523
1017
1725
6085
3545
2835
BT D1 D2 D3 L1 L2 L3 M
α
D1 D2 M D3
L1
L2
L3
D1 D2 M D3
L1
L2
L3
Pull stud MAS 403 30° and 45°
Pull stud Mori-Seiki MAS 90°
122
Order No.
7525-517524-117524-01*7525-117524-317525-31
M12M16M16M16M24M24
304040405050
30 4545304530
111515152323
71010101717
12,51717172525
4360
57,2608585
2335
32,2354545
1828
25,2283535
BT Degree D2 D1 D3 L1 L2 L3 M
* BT 40 45° 3 mm shortened.
AC
CE
SS
OR
IES
PULL STUD
Order No.
Order No.
7528-117528-31
7424-62*7424-61
M16M24
M16M16
4050
4040
1928
18,79618,796
1421
12,44612,446
1725
1717
5474
41,344,5
2934
16,319,3
2325
11,214,03
BT
SK
D1
D1
D2
D2
D3
D3
L1
L1
L2
L2
L3
L3
M
M
* 3mm extended.
L1
L2
L3
D1 D2 M D3
L1
L2
L3
D1 D2 M D3
15°
45°
Pull stud JIS B 6339 with through hole
Pull stud ANSI-CAT 40 (Mazak) with through hole and sealing at the end face
123
PULL STUD
AC
CE
SS
OR
IES
Order No.
7424-31 M2450 28,95 20,82 25 65,4 25,4 17,78
SK D1 D2 D3 L1 L2 L3 M
M
Order No.
7125-417125-42
M16M24
4050
2539,3
21,132
1725
5365
2525
13,613,35
SK D1 D2 D3 L1 L2 L3 M
Pull stud ANSI-CAT 50 (Mazak) with through hole and recess for O-Ring
Pull stud Ott-Ringnut with through hole
124
AC
CE
SS
OR
IES
PULL STUD
Order No.
7125-467125-47
M16M24
4050
2539,3
21,132
1725
5365
2525
13,613,35
SK D1 D2 D3 L1 L2 L3 M
Order No.
7125-117125-12
M16M24
4050
2539,3
21,132
1725
5365
2525
13,613,35
SK D1 D2 D3 L1 L2 L3 M
MM
Pull stud Ott-Ringnut without through hole, sealed
Pull stud Ott-Ringnut with internal thread
125
AC
CE
SS
OR
IES
PULL STUD
Order No.
7428-01 M1640 17 41,3 16,3
SK D L1 L2 M
D
Pull stud with thread S20x2
126
AC
CE
SS
OR
IES
PULL STUD
Order No.
Order No.
Order No.
M D l
603224604024605024606324608024610024
603225604025605025606325608025610025
228032228040228050228063228080228100
3240506380
100
3240506380
100
3240506380
100
M10x1M12x1M16x1M18x1M20x1,5M24x1,5
68
10121416
262933
36,539,543,5
HSK
HSK
HSK
DM
Coolant tube
Wrench for coolant tube
Taper cleaner
127
ACCESSORIES
AC
CE
SS
OR
IES
Order No.
Order No.
Order No.
Diam.
Diam.
increasing
increasing Pieces/Set
124-0xxx
124-1xxx
124-2xxx
124-3xxx
124-4xxx
124-5xxx
11
16
20
25
32
40
1,0-2,53,0-7,01,0-2,53,0-10,01,0-2,53,0-13,01,0-2,53,0-16,02,0-2,53,0-20,04,0-26,0
0,50,50,5
10,5
10,5
10,5
11
ER
ER
ER sw
124-oS124-1S124-2S124-3S124-4S124-5S
162-02162-03162-04162-05162-06162-07
0,511111
131012151823
1,0-7,01,0-10,02,0-13,02,0-16,03,0-20,04,0-26,0
111620253240
111620253240
172530---
· High precision design with concentricity and repeat accuracy of 5 µ.
· All lengthwise edges deburred and rounded additionally. This protects the inner cone of the chuck and provides consistently high concentricity.
· Increased holding forces and rigidity by super-finish-version.
ER-collets – repeatable accuracy 5 µ
Collet set
Wrench
Please complete the item no. with the respective diameter ofthe collet, i.e. ER 16 with Ø 2,5 = 124-1025.
128
ACCESSORIES
AC
CE
SS
OR
IES
Order No.
Order No.
ER
ER
162-22162-23162-24162-25
107-10M107-20M107-30M107-40M
11162025
11162025
Wrench ER Mini
Nuts ER Mini
Nuts ER
Order No. ER
107-10107-20107-30107-40107-50107-60
111620253240
172530
111222
-
fig. 1 fig. 2
--
SW fig.
129
AC
CE
SS
OR
IES
ACCESSORIES
Sealed ER-collets with jet nozzels »Cool Tool« – repeatable accuracy of collet 2 µ
· Highest runout accuracy combined with effective cooling and chip removal.
· Applicable up to 120 bar.
· Only shanks with nominal size can be used, tolerance h8.
· Shanks with lateral clamping flat can only be used limited. Which means the clamping flat has to be behind the sealing plug, otherwise the coolant can leak along the shank.
fig.: Collet with jet nozzels »Cool Tool« for tool holders without internal cooling.
Order No. Diameter
129-3xx
129-4xx
25
32
4/6/8/10/12/144/6/8/10/12
14/16/18
ER
Sealed ER-collets – repeatable accuracy of collet 5 µ
· For tools with internal coolant up to 120 bar!
· Only shanks with standard dimensions can be used, tolerance h8.
· Shanks with lateral clamping flat can only be used limited, which means the clamping flat has to be behind the sealing plug, otherwise the coolant can leak along the shank.
Order No.
128-1xx
128-2xx
128-3xx
128-4xx
128-5xx
16
20
25
32
40
3/4/6/8/105/7/9
3/4/6/810/12
5/7/9/114/6/8/10/12
14/163/5/7/9/11
13/154/6/8/10/1214/16/18/20
3/5/7/9/1113/15/17/19
6/8/10/12/1416/18/20/25
ER
fig.: internal cooling with sealed collet.
Please complete the item number with therespective diameter of the collet, i.e. ER 25 with Ø 8 = 129-308.
Please complete the item number with therespective diameter of the collet, i.e. ER 25 with Ø 10 = 128-310.
ACCESSORIES FOR INTERNAL COOLANT FOR ER COLLET CHUCKS
130
AC
CE
SS
OR
IES
Diameter
ACCESSORIES FOR INTERNAL COOLANT FOR ER COLLET CHUCKS
Order No.
107-21107-31107-41107-51107-61
1620253240
2530---
ER SW
Sealable ER -Nuts
Please note:Sealable clamping nuts are 5 mm longer than regular clamping nuts.Due to this the overall length of the chucks also increases by 5 mm.
Order No.
107-21xxx107-31xxx107-41xxx107-51xxx107-61xxx
1620253240
ER
Sealing discs for sealable ER clamping nuts
The sealing discs are available in steps of 0,5 mm.This means, the discs can cover a range of 0,4 mm from normal size shank down to smaller diameters. For example, to clamp a drill of dia. 5,7 a disc of the size 6 mm will be used.
Please note! For high pressure of 100 bar, the size of the shankhas to be the same as the nominal size of the disc.
For ordering please complete the item number with the diameterof the disc,
· i.e.: sealing disc for ER 25 with diameter 5,5 = 107-41055· i.e.: sealing disc for ER 32 with diameter 12 = 107-5112
· for using with sealing discs, for sealing conventional ER-collets.· for tools with internal cooling up to 100 bar.
131
AC
CE
SS
OR
IES
Order No.
Order No.
Order No.
Thread
Thread
Thread
235-02235-03235-04235-05235-06235-07235-08235-09
236-02236-03
242-01
M6M8
M10M12M14M16
M18x2M20x2
M6M8
M3
68
1012+1416+18
202532
6-1214-20
6-32
Order No. Threadfor Ø
for Ø
for Ø
for Ø
238-01238-02238-03238-04238-06238-08
M5M6
M8x1M10x1M12x1M16x1
68
1012 + 1416 + 18
20
Clamping screw for endmill holder
Clamping screw for slim endmill holder with ball head
Plug screw for cool tool bore
Length adjustment screw for slim endmill holder
132
AC
CE
SS
OR
IES
ACCESSORIES
Order No.
Order No.
Order No.
Thread
Thread
Thread
for Ø
for Ø
for Ø
235-02235-03235-04235-05235-06235-07235-08235-09
237-01237-02237-03237-04237-05237-06237-07237-08237-09
238-01238-02238-03238-04238-06238-08
M6M8
M10M12M14M16
M18x2M20x2
M5M6M8
M10M10M12M12M16M20
M5M6
M8x1M10x1M12x1M16x1
68
1012+1416+18
202532
68
101214161820
25+32
68
1012+1416+18
20+25+32
Clamping screw for Whistle-Notch
Length adjustment screw for Whistle-Notch
Length adjustment screw for shrink fit holder
133
AC
CE
SS
OR
IES
ACCESSORIES
Order No. for Ø
226-03226-04226-05226-06226-07226-08226-09
16222732405060
Wrench for shell mill holder
Clamping screw for shell mill holder
Order No. Thread
225-03225-04225-05225-06225-07225-08225-09
16222732405060
M8M10M12M16M20M24M30
Drive key for shell mill holder
134
Order No.
240-01240-02240-03240-04240-05240-06240-07
16222732405060
240-01240-02240-43240-04240-05
SK40 SHORT for Ø
162227
3240
AC
CE
SS
OR
IES
for Ø
for Ø
ACCESSORIES
Order No. for Ø
240-31240-32240-33240-34240-35240-36240-37
16222732405060
Drive key for CORUM
Order No. for Ø
226-03226-04226-05226-06226-07
1622273240
Wrench for combi shell mill holder
135
ACCESSORIES
Drive key screws
240-01240-02240-43240-44
240-01240-02240-43240-44
240-01240-02240-43240-44
C4 for Ø
C5 for Ø
C6 for Ø
C8 for Ø
1622
16
16
16
22
22
22
27
27
27
32
32
32
240-01240-42
Order No.
AC
CE
SS
OR
IES
Order No.
400-01400-02400-03400-04400-05400-06400-07
253240506380
100
ABS
Spare parts for ABS holders
Clamping set consisting of taperedscrew and clamping screw.
Order No.
224-03224-04224-05224-06224-07
1622273240
for Ø
Drive key
Order No.
223-02223-03223-04223-05223-06
1622273240
for Ø
Adjustment spring
136
ACCESSORIES
Clamping screw for combi shell mill holder
Order No. for Ø
225-03225-04225-05225-06225-07
1622273240
Thread
M8M10M12M16M20
AC
CE
SS
OR
IES
NOTES
137
138
Prices valid until 31.12.2015. Our previous price documents become invalid Any further claims of the Buyer are excluded. If the delivery becomes with the publication of this catalogue. impossible due to Acts of God, there is no claim to performance. The day of
delivery is the day of the agreement or the readiness for dispatch. The risk Please take note of the following detailed information when placing your passes to the recipient on this day.orders:1. The prices are non-binding basic prices in euros/unit, plus VAT, ex works, 5. Shipping and packagingexcluding packaging. The shipping is carried out at the recipient's account and risk. If the 2. The minimum order value is 50.00 euros net. In the case of orders under shipping is delayed as a consequence of circumstances which we are not the minimum order value, we will increase the order value to 50.00 euros net. responsible for, the risk passes to the Purchaser from the day of the readiness 3. Basically speaking, goods returned for crediting for goods from service for dispatch. The goods are packed and shipped according to normal trade properly rendered due to orders placed incorrectly by the customer are only practice. The responsibility for shipment at the lowest possible price is not accepted within 10 days after delivery subject to deduction of a 15% assumed. The packaging is invoiced and will not be taken back.rewarehousing charge, at least, however, 30.00 euros.4. Our invoices shall be paid 10 days after delivery with 2% settlement 6. Warrantydiscount or 30 days net. The liability for defects commences with the day of the delivery for all 5. In the event of the placing of an order, we require that our conditions of defects which we are responsible for, which occur within 10 days from the date sale are known and have been accepted, unless special agreements have been of shipment and are notified to us immediately in writing, at the latest entered into in writing. however within two weeks after the defect has been determined. We will 6. All illustrations in the catalogue are non-binding. Subject to technical remedy all defects that occur due to faulty material or craftsmanship free of changes without prior notice, errors excepted. The copyright for text, graphic charge, namely by repairing, by reconditioning or by delivering new parts. All design and pictorial representation is held by K. Schüssler GmbH & Co. KG. further claims, e.g. rescission of the contract, reduction of the purchase price,
compensatory damages, offsetting as well as rights of retention are excluded. Conditions of sale: We will not be liable for repairs which are carried out by third parties, for
damage caused by natural wear and tear or by improper handling and for parts 1. General which do not come from our own production. The Buyer must provide us with
The terms of delivery are an integral part of all supply contracts and are the requisite time and opportunity for undertaking the necessary repairs or accepted with the placing of the order. Any deviating terms and conditions of replacement deliveries, otherwise we shall be released from the liability for business on the part of the Buyer shall not be binding on us, even if we do not defects. We may refuse to remedy defects as long as the Purchaser does not expressly object. meet his obligations.
2. Offer and order confirmation: 7. Retention of titleAll offers are non-binding, also with regard to the delivery periods. It is The products shall remain our property until such time as payment has
possible to deviate from the offer in the event of design modifications. been made. The retention of title shall continue even if individual receivables Dimensions, weights, illustrations, output figures and drawings are only are included in a current account and the balance has been deducted and binding for the design if expressly confirmed as such in writing. The agree- accepted. The Purchaser shall only be entitled and authorised to resell the ments become legally binding with the written order confirmation. If the reserved goods, provided that the purchase-price claim from the resale passes Client makes drawings etc. available, he shall be responsible for ensuring that to us in accordance with the above conditions and the Purchaser himself third-party rights are not violated. retains the title in the reserved goods until such time as full payment of the
purchase price has been made by the customer. The Purchaser is not 3. Prices and payment authorised to make any other disposition. The Purchaser already assigns his
The prices valid on the day of delivery are used for invoicing. Our prices receivables from a resale of the reserved goods to us if he is not in possession shall apply for delivery ex supply plant, excluding the costs for the packaging. of these before he has acquired the title in them. In this respect, it is Our invoices shall be paid – unless otherwise agreed – 10 days after delivery irrespective of whether he sells the reserved goods to one or several with 2% settlement discount or 30 days net. The withholding of payments or customers, together with other goods which do not belong to us. The assigned offsetting with other receivables is prohibited. In the case of payments by receivables are used as security for our receivables to the amount of the value cheque, the obligation to pay is only fulfilled when the proceeds have been of the reserved goods sold in each case. The Purchaser must notify us credited to our account; in the case of bills of exchange with the payment on immediately in the event of attachments, confiscations or other dispositions the due date. Default interest, discount charges etc. shall be borne by the by third parties.Customer. We will only supply against payment in advance or security if the financial position of the Customer is bad. In this case, any unmatured bills of 8. Place of performance and jurisdictionexchange or cheques become due for payment immediately. The place of performance for deliveries and payments and the place of
jurisdiction is Tübingen. This shall apply to any proceedings restricted to 4. Delivery documentary evidence, summary bill of exchange enforcement proceedings
Delivery periods commence with the day of fulfilment of any advance and cheque payment enforcement proceedings. In the event of foreign performance obligations (including, for example, advance payment) of the business transactions, Tübingen or a different court can be designated at our Purchaser and all technical and other requirements for commencing the discretion as the place of jurisdiction for all disputes arising from this order. production. The delivery period shall be reasonably extended in the event that Similarly, the decision regarding the applicable law is left to us.unforeseen obstacles occur at our plant or at our subcontractors (e.g. plant disruptions, goods becoming scrap, delays in the delivery of essential raw materials), insofar as these affect the production or delivery. We shall not be responsible for the above-mentioned circumstances even during the delay in performance. The Purchaser is notified of the start and end of delivery obstacles.
Default in delivery occurs if we culpably delay the delivery. The default in delivery can be claimed after granting a reasonable grace period.
STANDARD CONDITIONS OF SALE
HOW TO REACH US
Continue on the A81 to Singencoming from the north andfrom the west on the A81 to the south of Stuttgart. ExitA81 to Rottenburg. Drivetowards from Rottenburgto Hechingen and Bodelshausen.
Bodelshausen
139
to Heilbronn
Airport Stuttgart
Main road
Highway
to Ulm
Stuttgart
In Bodelshausenyou will find usdirectly at thelocal main roadBahnhofstra e 108.
Coming from the south,exit the A8 at Empfingen and follow the directionto Haigerloch. From Haigerloch further towards to Hechingen and Bodelshausen.
Coming from the east,exit the A8 at StuttgartAirport and follow the B27towards Tübingen. Exit theB27 at Bodelshausen.
to Singen
to Karlsruhe
Karl Schüssler GmbH & Co. KG
Bahnhofstraße 108
72411 Bodelshausen / Germany
Phone +49 74 71 / 95 90-0
Fax +49 74 71 / 95 90-90
info@k-schuessler.de
www.k-schuessler.de
top related