garmin nuvi 2460 lmt speaker replacement nuvi 2460 lmt speaker replacement this guide will allow you...

Garmin nuvi 2460 LMT Speaker ReplacementThis guide will allow you to replace a faulty or defective speaker.

Geschrieben von: Ricardo Audain

Garmin nuvi 2460 LMT Speaker Replacement

© iFixit — CC BY-NC-SA de.iFixit.com Seite 1 von 6

WERKZEUGE:T10 Torx Screwdriver (1)

Tweezers (1)

iFixit Opening Tools (1)

Garmin nuvi 2460 LMT Speaker Replacement

© iFixit — CC BY-NC-SA de.iFixit.com Seite 2 von 6

Schritt 1 — Back Cover

Locate the four screws in the fourcorners of the back panel.

Schritt 2

Using a T5 Torx Screwdriver, beginunscrewing the four 11.0 mmscrews from the back panel.

Garmin nuvi 2460 LMT Speaker Replacement

© iFixit — CC BY-NC-SA de.iFixit.com Seite 3 von 6

Schritt 3

Using a plastic opening tool orsimilar object, find the groove in theside of the device and begin pryingopen the back panel. Work the toolaround the entire panel until it popsoff.

Schritt 4

Lift the beige clamp using a tweezeror your fingernail and remove theconnector.

Garmin nuvi 2460 LMT Speaker Replacement

© iFixit — CC BY-NC-SA de.iFixit.com Seite 4 von 6

Schritt 5

Lift the connector gently from thesocket.

Schritt 6 — Speaker

Lift and separate the speakerconnector cable using a pair oftweezers.

Garmin nuvi 2460 LMT Speaker Replacement

© iFixit — CC BY-NC-SA de.iFixit.com Seite 5 von 6

To reassemble your device, follow these instructions in reverse order.

Dieses Dokument wurde zuletzt angelegt am 2017-11-29 10:14:22 PM.

Schritt 7

Gently lift the speaker out of theback cover using a plastic openingtool.

Apply force as needed if there isglue holding the speaker in place.

Garmin nuvi 2460 LMT Speaker Replacement

© iFixit — CC BY-NC-SA de.iFixit.com Seite 6 von 6