gas insulated transmission lines
Post on 16-Jan-2017
148 Views
Preview:
TRANSCRIPT
A PRESENTATION ON
Loss LESS Transmission BY GAS INSULATED transmission LINE
BY: RAHUL MEHRA
CONTENTS
GAS INSULATED LINE (GIL) BASIC LAYOUT OF GIL MAIN COMPONENTS GENERATIONS OF GIL INSTALLATION OF GIL TECHNICAL DATA COMPARISON OF LOSSES ADVANTAGES DISADVANTAGES APPLICATIONS SUMMARY REFERENCES
GAS INSULATED LINE Gas Insulated Line invented in 1965 by Massachusetts Institute of Technology.
GIL consists Aluminium conductor surrounded by mixture of N2 and SF6 inside the enclosure.
GIL system first installation in Black Forest as long ago as 1975 of about 4km. length.
GIL system can be used both in above & below ground.
BASIC LAYOUT OF GIL
MAIN COMPONENTSConductors & enclosuresInsulators & particle trapsPlug in contactsAluminum bellowsEnclosure joints
GENERTIONS OF GIL
1st Generation 2nd Generation pure SF6
Aluminium pipes with straight beads
9m long transport units
Hand welding
Application of disc spacers
N2-SF6 gas mixture Spiral welded aluminium pipes Transportation units between
11.5m and 13.5m Automated Orbital welding Bending of the whole tube
possible to radii > 400 m
Application of support insulators
INSTALLATION OF GIL
1. Aboveground Installation
GIL are unaffected by high ambient temperatures, intensive solar radiation or severe atmospheric pollution.
High transmission power can be achieved with aboveground installation.
Corrosion protection is not required.
2. Tunnel Installation With this method of installation
the land above the tunnel can be fully restored to agricultural use.
The system stays accessible for easy inspection and high transmission capacity is ensured.
3. Vertical Installation
Top solution especially for cavern hydropower plants.
GIL systems pose no fire risk, they can be installed in a tunnel
4. Direct burial Installation
These systems are coated with a continuous polyethylene to safeguard corrosion resistant Aluminium alloy.
The land can be returned to agricultural use with very minor restrictions.
COMPARISON OF LOSSES
ADVANTAGES High transmission capacity Low transmission losses Low capacitance High reliability High operational safety (no fire risk, no external impact
in case of internal failures). No practical ageing of components Very low external magnetic field No interference with the communication systems
DISADVANTAGES
Length of each GIL section is limited. Particle contamination lower the insulating reliability of
GIL. Breakdown of insulator. Earthquake resistant design must be considered. SF6 gas is harmful to ozone.
Installation in tunnels
Ideal for environments that are sensitive to electro-magnetic fields.
Suitable for metropolitan areas where high energy rate is required.
Well suited for high power transmission.
APPLICATIONS
SUMMARY
Sealed for lifetime Continous welded High capacity Low losses Long lifetime through particle trap No reactive compensation (1000km) No ageing of insulation Automatic reclosure functionality Low external electromagnetic fields No fire hazard
REFERENCES[1]. Koch H.,Kumar A., Christl N., Lei X., Povh D., Retzmann D., Advanced Technologies for Power Transmission and Distribution – Benefits and Impact of Innovations, Siemens Brochure, 2010.
[2]. Hillers T., Koch H., Gas-Insulated Transmission Lines (GIL): The solution for high power transmission underground, IEEE, PES Power Delivery Conference, Madrid, Spain, 08/1999.
[3]. Giebel G., Nielson H., Hurley B., Bigger transmission distance with lower load factors: the European dilemma, Modern Power System, 10/2005. [4]. IEC 62271-203 High-voltage switchgear and control gear – Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV, IEC and Geneva, Switzerland, 2003-11.
[5]. Benato R., Fellin L, Marzenta D., Paolucci A., Gas-Insulated Transmission Lines: excellent performance and low environmental impact, Vol.1 pp. 385–405, Napoli, Italia, 12.–18. May 2000.
Thank You
top related