gateway testbed build instructions version · 2017. 6. 16. · gateway testbed build instructions...
Post on 17-Aug-2021
7 Views
Preview:
TRANSCRIPT
Gateway Testbed Build Instructions Version 3
Project Lead The Way © and Carnegie Mellon Robotics Academy © / For use with VEX® Robotics Systems Gateway Testbed Build Instructions Version 3• 1
MATERIALS QUANTITY MATERIALS QUANTITY 1 1
8112 4
15 1 1 1 1 5
BASEPLATE VEX CORTEX SCREW, 8-32 x 3/4” LONG SCREW, 8-32 x 1/2” LONG SCREW, 6-32 x 3/4” LONG SCREW, 6-32 x 1/2” LONG NUT, 8-32 BUMP SWITCH LIMIT SWITCH LINE TRACKER POTENTIOMETER 2” DRIVE SHAFT 36 TOOTH GEAR 1
6 1 1 3 3 2 2 2 1 1 2
SHAFT COLLAR BATTERY STRAP SLOTTED ANGLE DELRIN BEARING 2 WIRE MOTOR(393) SPACER 2.75” WHEEL 2” STANDOFF BATTERY GREEN LED LIGHT MOTOR CONTROLLER CLAW KIT 1
PARTS LIST
Gateway Testbed Build Instructions Version 3
Project Lead The Way © and Carnegie Mellon Robotics Academy © / For use with VEX® Robotics Systems Gateway Testbed Build Instructions Version 3• 2
x4 x4
3/4”
Base Plate Cortex
x2x2
1/2”
Bump Switch
Note: Unless otherwise stated, the screw size is 8/32”
Gateway Testbed Build Instructions Version 3
Project Lead The Way © and Carnegie Mellon Robotics Academy © / For use with VEX® Robotics Systems Gateway Testbed Build Instructions Version 3• 3
x2 x2
1/2”
Limit Switch
x1 x1
1/2”
Line Tracker
Gateway Testbed Build Instructions Version 3
Project Lead The Way © and Carnegie Mellon Robotics Academy © / For use with VEX® Robotics Systems Gateway Testbed Build Instructions Version 3• 4
x2 x2
3/4”
Potentiometer
x1 x1x136 Tooth Gear 2” Drive Shaft Shaft Collar
Gateway Testbed Build Instructions Version 3
Project Lead The Way © and Carnegie Mellon Robotics Academy © / For use with VEX® Robotics Systems Gateway Testbed Build Instructions Version 3• 5
x2x2
1/2”
Battery Strap
x2 x2x2
3/4”
Slotted Angle Delrin Bearing
Gateway Testbed Build Instructions Version 3
Project Lead The Way © and Carnegie Mellon Robotics Academy © / For use with VEX® Robotics Systems Gateway Testbed Build Instructions Version 3• 6
x2 x2x2 x2 x2 x22-Wire Motor (393) 2” Drive Shaft Small Spacer Shaft Collar
x2 x22.75” Wheel Shaft Collar
6-32 x 1/2” 6-32 x 3/4”
Gateway Testbed Build Instructions Version 3
Project Lead The Way © and Carnegie Mellon Robotics Academy © / For use with VEX® Robotics Systems Gateway Testbed Build Instructions Version 3• 7
x2 x2x1 x1 x2 x1Shaft Collar2-Wire Motor (393) 2” Drive Shaft 12 Tooth Gear
Note: Items (except Motor)included in the Claw Kit.
6-32 x 1/2”
Gateway Testbed Build Instructions Version 3
Project Lead The Way © and Carnegie Mellon Robotics Academy © / For use with VEX® Robotics Systems Gateway Testbed Build Instructions Version 3• 8
x2
1/2”
x2x2
1/2”
2” Standoff
Gateway Testbed Build Instructions Version 3
Project Lead The Way © and Carnegie Mellon Robotics Academy © / For use with VEX® Robotics Systems Gateway Testbed Build Instructions Version 3• 9
Line FollowerPotentiometer
Limit SwitchBump Switch
Green LED
Left MotorRight Motor
Battery
Green LED
Claw
Motor Controller (x2)
This side will connect to
motor.
This side will connect to
Cortex
top related