gearbox manual dg450 2017...pole position dg450–revision: 004 gearbox manual 60 in gearboxes 4.7....

Gearbox Manual DG450

2017

2 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

Warning Please be aware that information in this manual may be inaccurate, incomplete or contain typographical errors. The content of this manual is subject to

change without notice and should, therefore, be used for informational purposes only. Consequently, replacement parts must always by ordered according

to the part number engraved on the part.

If you find information in this manual that is incorrect or incomplete, we would appreciate your comments and suggestions.

3 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

Contents Warning ............................................................................................................................................................................................................................................. 2

Contents ............................................................................................................................................................................................................................................ 3

1. Technical Specifications................................................................................................................................................................................................................. 5

1.1. General Specifications ............................................................................................................................................................................................................ 6

1.2. General Dimensions ................................................................................................................................................................................................................ 7

1.3. Oil System ............................................................................................................................................................................................................................... 8

2. Gearbox Assembly ......................................................................................................................................................................................................................... 9

2.1. General Instruction Notes..................................................................................................................................................................................................... 10

2.2. Bearing Assembly .................................................................................................................................................................................................................. 11

2.3. Gearbox Assembly Ford ........................................................................................................................................................................................................ 13

2.4. Gearbox Assembly BMW ...................................................................................................................................................................................................... 41

2.5. Rotary Sensor ........................................................................................................................................................................................................................ 45

3. Gear Ratio List ............................................................................................................................................................................................................................. 47

4. Accessories .................................................................................................................................................................................................................................. 49

4.1. Bellhousings / Adaptor Plates ............................................................................................................................................................................................... 50

4.2. Gearbox Brackets .................................................................................................................................................................................................................. 53

4.3. Gear Lever ............................................................................................................................................................................................................................. 54

4.4. DMS Gear Lever .................................................................................................................................................................................................................... 56

4.5. Gear Lever Brackets .............................................................................................................................................................................................................. 58

4.6. Gear Indicator ....................................................................................................................................................................................................................... 59

4.7. Display Unit ........................................................................................................................................................................................................................... 60

4.8. Switchbox .............................................................................................................................................................................................................................. 61

4.9. Oil Breather Catchtank ......................................................................................................................................................................................................... 62

4 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

4.10. Paddleshift System ............................................................................................................................................................................................................. 63

5. Assembly Tooling ......................................................................................................................................................................................................................... 65

6. Contact Information .................................................................................................................................................................................................................... 67

6.1. Contact Details ...................................................................................................................................................................................................................... 68

Appendix A: Technical Bulletins ...................................................................................................................................................................................................... 69

Appendix B: Amendments ............................................................................................................................................................................................................... 71

5 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

1. Technical Specifications

6 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

1.1. General Specifications

DG450

Application Circuit, Hill Climb & Rally

Type 6-Speed Sequential

Torque rating 450 Nm

Weight (dry weight) 37 kg

7 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

1.2. General Dimensions

8 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

1.3. Oil System A gerotor internal-gear pump is fitted as standard in the DG450. The oil can be fed to an external oil cooler from the oil-out port and returned to the

gearbox using the oil-in port. On the right and left side of the main housing an M12x1.50 thread is provided to mount oil temperature and pressure sensors.

On top of the gearbox a D-06 adaptor is mounted which needs to be connected to an oil catch tank or has to be replaced with a breather.

Oil Type Motul 75W140 Gear Competition

Oil Quantity T.b.a.

9 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

2. Gearbox Assembly

10 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

2.1. General Instruction Notes The following information is intended for mechanics to (dis)assemble the gearbox. This is illustrated using exploded views including the corresponding Bill Of

Materials (BOM). Specific notes related to the (dis)assembly of a part are shown in the notes column of the BOM. For more details on the bearing

installation see §2.2 Bearing Assembly.

Please read the manual and make sure all parts are present before starting to assemble. Also ensure that all parts are clean and undamaged. It is strongly

recommended to replace K-nuts, seals and circlips after removal. Only genuine Drenth Gearboxes parts should be used when overhauling the gearbox.

11 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

2.2. Bearing Assembly To reduce the risk of bearing or casing damage, heat mounting is used to install or remove bearings. Drenth Gearboxes highly recommend to use an oven to

ensure an even heat distribution. Casings should not be heated above 130°C. Fit the bearings promptly after removing the casing from the oven to avoid

extra heating cycles being required.

12 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

13 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

2.3. Gearbox Assembly Ford

14 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

15 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

16 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

17 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

18 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

19 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

20 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

21 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

22 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

23 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

24 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

25 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

26 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

27 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

28 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

29 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

30 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

31 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

32 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

33 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

34 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

35 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

36 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

37 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

38 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

39 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

40 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

41 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

2.4. Gearbox Assembly BMW

42 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

43 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

44 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

45 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

2.5. Rotary Sensor

The gearboxes come with a Penny & Giles SRH280DP rotary sensor. The rotary sensor signal is used to show the engaged gear on the Drenth Display Unit /

Drenth Gear Indicator or any other display. For correct gear indication, it is necessary that rotary sensor is properly connected and calibrated. Information

related to the wiring of the sensor is shown in the table below.

Cable Colour Description

Red + 5 V Supply

Yellow Output 1

White Output 2

Black 0 V Supply (GND)

Depending on the type of gearbox, Output 1 or Output 2 is used. The table below shows which output is used for the different types of gearboxes:

Gearbox Type Output Cable Colour

DG350 Output 2 White

DG350 Direct Replacement Output 1 Yellow

DG400 Output 2 White

DG450 Output 2 White

DG500 Output 2 White

DGT250 Output 2 White

DGT350 Output 2 White

Mitsubishi Lancer Evolution VI-IX Output 1 Yellow

Mitsubishi Lancer Evolution X Output 1 Yellow

MPG Output 1 White

46 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

The connection diagrams when using output 1 or output 2 are shown below:

Please note that the above information does not apply to other sensors!

47 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

3. Gear Ratio List

48 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

The available gear ratios for the DG350 are shown in the table below. In addition, customer specific gear ratios can be developed, produced and supplied.

Layshaft Ratios Gear Ratios Drop Gear Ratio

1st 2nd, 3rd, 4th, 5th & 6th

2.500 1.933 1.556 1.160 0.889 1.300 0.960

2.286 1.875 1.474 1.136 0.857 1.250 0.916

1.824 1.412 1.107 0.828 1.208 0.880

1.765 1.381 1.091 1.182 0.846

1.722 1.350 1.042 1.136 0.828

1.667 1.300 1.000 1.091 0.800

1.632 1.250 0.960 1.042 0.769

1.611 1.182 0.923 1.000

49 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

4. Accessories

50 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

4.1. Bellhousings / Adaptor Plates Drenth Gearboxes offers a variety of removable bellhousings and adaptor plates to mount the DG450 into different vehicles. In addition, bellhousings and

adaptor plates for customer specific applications can be developed, produced and supplied.

51 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

52 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

53 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

1

4.2. Gearbox Brackets The Drenth gearbox brackets are designed to mount the DG400 using the existing chassis mounting points of the specific vehicle. Please note that these

brackets can only be used in vehicles where the chassis mounting points and/or the position of the engine have not been modified.

54 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

4.3. Gear Lever Drenth Gearboxes offers a one-piece aluminium gear lever which, in combination with shift rods or a push/pull cable, can be used on any Drenth sequential

gearbox to change gear. Several gearbox and chassis mounted brackets are available for mounting the gear lever at the desired position.

In order to suit a variety of applications, the gear lever comes in two different lengths:

• 260 mm • 360 mm

55 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

56 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

4.4. DMS Gear Lever Drenth Gearboxes offers a one-piece DMS aluminium gear lever with integrated electronics which, in combination with shift rods or a push/pull cable, can

be used on any Drenth sequential gearbox to change gear. The analogue output signal of the gear lever electronics can be used to configure the ignition cut

enabling flat-shifting. An optional Switchbox is used to convert the analogue signal when a digital output signal for programming the ignition cut is required.

The DMS gear lever can also be used to program down shift throttle blip if the car is equipped with drive-by-wire. In addition, several gearbox and chassis

mounted brackets are available for mounting the gear lever at the desired position.

In order to suit a variety of applications, the gear lever comes in two different lengths:

• 260 mm • 360 mm

57 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

58 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

4.5. Gear Lever Brackets Drenth Gearboxes offers various types of gear lever brackets for mounting the (DMS) gear lever in the car. There can be chosen between two types of

brackets, namely gearbox mounted gear lever brackets and tunnel mounted gear lever brackets.

59 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

4.6. Gear Indicator Designed to work seamlessly with every Drenth sequential gearbox, the gear indicator uses the rotary sensor signal to show the selected gear. Using the

supplied software, it is possible to show up to 8 forward gears as well as neutral and reverse on the display with integrated light sensor. In addition, the gear

indicator features an option to control the reversing light.

Features:

- Gear indication

- Reverse light

- Automatic calibration

60 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

4.7. Display Unit Designed to work seamlessly with every Drenth sequential gearbox, the display unit uses the rotary sensor signal to show the selected gear. Using the

supplied software, it is possible to show up to 8 forward gears as well as neutral and reverse on the display with integrated light sensor. In addition, the

display unit features an adjustable shift light and an option to control throttle blip or the reversing light. In combination with the DMS gear lever, the display

unit can be used for flat-shifting which allows the user to set the cut time for each gear separately. This is also possible when using any other load cell,

Switchbox or switch.

Features:

• Gear indication • Shift light • Flat-shifting • Down shift throttle blip / Reverse light • Automatic calibration • DMS Gear Lever calibration

61 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

4.8. Switchbox The Drenth Gearboxes Switchbox is an analog-to-digital converter which is used in combination with the Drenth Display Unit or a programmable ECU to

enable flat-shifting. When a digital output signal is required for setting the ignition cut the Switchbox is used to convert the analogue signal. Because the

Switchbox is equipped with two potentiometers, the upshift and downshift threshold levels can be adjusted as desired.

Features:

• Adjustable downshift threshold voltage

• Adjustable upshift threshold voltage

62 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

4.9. Oil Breather Catchtank Drenth Gearboxes recommends the use of an Oil Breather Catch Tank for breathing the gearbox. Therefore Drenth Gearboxes offers a universal catch tank

which can be used with any gearbox. The set includes the breather catch tank, oil hose and the necessary adaptors.

63 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

4.10. Paddleshift System The DG450 can be equipped with a paddleshift system allowing the driver to change gears by using steering wheel mounted shift paddles. For mounting the

actuators of the different paddleshift systems, Drenth Gearboxes has developed various brackets for the DG450. If the preferred paddleshift system has a

safety feature which prevent the driver from selecting neutral and reverse accidentally during downshifts, then the mechanical blocking system can be

replaced and / or removed. In this case the following parts are required:

64 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

65 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

5. Assembly Tooling

66 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

Optionally, Drenth Gearboxes provide tools which are used for assembling and disassembling the DG450. The tools listed below make it possible to perform

maintenance on the DG450:

67 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

6. Contact Information

68 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

6.1. Contact Details Drenth Motorsport Gearboxes

Fleuweweg 10

7468 AG Enter

The Netherlands

www.drenth-gearboxes.com

Spare Parts: +31 (0)547 38 26 96 sales@drenth-gearboxes.com

69 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

Appendix A: Technical Bulletins

70 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

71 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

Appendix B: Amendments

72 Gearbox Manual DG450– Revision: 004 Pole Position

In Gearboxes

Date Page Modification 18-10-2017 1st Issue of completely revised manual

29-06-2018 61-62 Added chapter 4.9 Paddleshift System

03-07-2018 57 Added chapter 4.5 Gear Lever Brackets

18-07-2018 52 8

Added Adaptor Plates Changed oil type to Motul 75W140 Gear Competion

14-10-2019 46 Position Rotary Sensor added

T +31 (0)547 38 26 96 E sales@drenth-gearboxes.com W www.drenth-gearboxes.com