high throughput automation for epa method 200.7 & 200

Elemental Scientific

Elemental ScientificICP | ICPMS | AA

High Throughput Automation for EPAMethod 200.7 & 200.8

Stephen J. Mangum Elemental Scientific

NEMC Conference 2021

• SampleSense Enviro• Reduces EPA methods sample to sample time• Provides Quality Assurance for sample loading• Eliminates method timing• Eliminates loading variability due to sample viscosity

Improves Sample throughput without data compromise

New Automation Creating High Throughput

SampleSense Enviro

• What is SampleSense Enviro?

• DXCi Intelligent Autosampler

• SampleSense FAST• Vacuum control valve

• Pergo Argon Humidifier

DXCi: The Intelligent Autocorrecting Autosampler

• Monitors autosampler probe position in 3 axes of motion

• Intelligently corrects the position

• Reports unmoved obstructions

• Eliminates analytical interruptions

• Available in 2DXCi, 4DXCi, 8DXCi, 14DXCi

• All SampleSense systems will include new DXCi

New DXCi Intelligent Position‐Correcting Autosampler

• Optical sensors monitor for arrival of solution front at both entrance and exit.

• Solution arrival at both locations provides confirmation that sample loop is fully loaded

• Air bubbles during the sample loop loading are detected

SampleSense Valve – how does it work?

Exit Sample In

Sensors

SensorIndicators

SampleSense Enviro: Optimized QC Workflow

• Intelligent Sample Loading Verification• SampleSense Enviro reports non‐sample events:

• Capped Sample Vials• Underfilled Sample Vials• Underfilled/Empty QC Standards

• Log of “Un‐Sensed” Samples is Generated

SampleSense Enviro: Low Sample Consumption

• Vacuum‐Control Valve:• Trapping valve minimizes sample consumption. • Automatically shutting off the vacuum to conserve valuable sample.

• SampleSense Enviro consumes < 2.5 mL of sample*.• The black line shows the original level of 6 mL sample • Post analysis, 3.5 mL of sample remains for a potential reanalysis.

* System using 1.5 mL loop size

SampleSense Enviro Flow Diagram

Step 1:

Step 2:

When both sensors are triggered, vacuum valve closes and then sample valve switches to inject.

Step 3:

SampleSense Enviro Analytical Cycle

Experimental: Instrument Setup & Method conditions

Method settings use standard analytical conditions(Analytes, replicates, sample flow, etc.)

Method uses 3 replicates Uses < 2.5 mL sample/injection Probe washout and loop rinse are part of FAST method

Example ICP‐OES Time Savings (U.S. EPA Method 200.7)

Standard Valving System• 1:16 per sample

Sample Id Acquisition Time

Blank 8/22/2018 12:16:46 PMCal-1 8/22/2018 12:20:32 PMCal-2 8/22/2018 12:24:18 PMCal-3 8/22/2018 12:28:06 PMCal-4 8/22/2018 12:31:18 PMCal-5 8/22/2018 12:34:31 PM

Sample Id Acquisition Time

BLANK 8/22/2018 5:27:48 PMCal-1 8/22/2018 5:29:45 PMCal-2 8/22/2018 5:31:40 PMCal-3 8/22/2018 5:33:00 PMCal-4 8/22/2018 5:34:16 PMCal-5 8/22/2018 5:35:32 PM

Standard autosampler• 3:12 per sample

SampleSense Enviro System• 0:45 per sample

A Few Examples of Calibrations

Pergo ‐ Argon Humidifier

Benefits• Dissolves salt crystals at nebulizer tip

• Reduces long term drift• Improves stability• Improves detection limits

Experimental: Calibration and Data

100.0%

120.0%

140.0%

160.0%

180.0%

200.0%

1 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55

% Recov

Row Index Number

Y‐Axial

Sc‐Radial

Sc‐Axial

• Calibration for As 193

• IS plot over sample run

0.999997

Internal Standard Recovery

0:00 0:28 0:57 1:26 1:55 2:24 2:52 3:21 3:50 4:19 4:48

IS Recov

Time (hours)

Drift without pergo

Sc 45 (IS)(cps)

Ge 72 (IS)(cps)

In 115 (IS)(cps)

Ir 193 (IS)(cps)

Rh 103(cps)

Tb 159(cps)

Internal Standard Recovery

0:00 0:28 0:57 1:26 1:55 2:24 2:52 3:21 3:50 4:19 4:48

IS Recov

Time (hours)

Stable Signal with pergo

Sc 45 (IS)(cps)

Ge 72 (IS)(cps)

In 115 (IS)(cps)

Ir 193 (IS)(cps)

Rh 103(cps)

Tb 159(cps)

Benefits Summary

Questions??

SampleSense Enviro – provides fastest, most economical, most intelligent analysis

high throughput automation for epa method 200.7 & 200

Documents

trace metal considerations when phosphorus removal ......

scope of accreditation to iso guide 34:2009 … guide...

2014 catalog of analytical standards - msscientific catalog...

high throughput genotoxicity profiling of the us epa toxcast...

analytically monitoring the effect of fracturing activity...

simplify and improve metals prep in your lab with hotblock...

hqacol03-20190703072909...2019/06/05 · epa 1664b epa...

4 - compatibility and stability brian icp conf 2016 icp...

chemserve environmental analysis chemical · chemserve...

icp method 200.7

2017 list of laboratories certified by … list of...

operation & instruction manual - envexp.com manuals... ·...

h a ft - us department of energy etals-icp 200.7-metals-icp...

2013 price list - american analytical services, inc ... ·...

oregon - anatek labs · matrix reference code analyte code...

blah blah blah - american association for laboratory...

operation & instruction manual - davis · troubleshooting...

the analysis of water and wastes by u.s. epa method 200.7...

emsl.com - cinnaminson... · epa 200.7 rev. 4.4 epa 200.8...

2017 list of laboratories certified by...