importing androidx86 into virtualization software

Importing Androidx86 into

Virtualization Software This document will show how to import the Androidx86 virtual machine into VirtualBox, but

this will also work in VMWare.

Let’s get started.

1. Go to IntroAndroidSecurity download | SourceForge.net

2. Click the External Link dialog box and select Androidx86

The download of the Androidx86 emulator will start. **Make sure to remember where

you saved the file as you will need this location later**

3. Open your virtualization software. In my case it’s VirtualBox

Below is a screenshot of the home page of VirtualBox.

Note: your home page will look different as I have virtual machines from other

endeavors.

4. Go to File → Import Appliance

5. The Import Appliance dialog box will open

6. Click on the folder on the right side and navigate to the location where you saved the

Androidx86 emulator from step 2. Note: In my instance, I have it in my downloads folder

7. Click on the Next button

8. The next screen is the appliance settings.

9. Click Import as we’re not changing anything on this screen.

10. The virtualization software will then start the importing process

11. Once the importing process is done the virtual machine will show inside the home page

12. Double click the Androidx86 virtual machine to start it

13. When the virtual machine starts, select the second option and press Enter

We’re selecting the second option as we need the emulator to complete a script to get

our host (computer) network settings.

14. A script will kick off after a while you will be presented with a command prompt

15. At this point type exit and press Enter

16. Type exit again and press Enter for the script to continue

17. Once the script is done the Android emulator will start

18. When the emulator starts you might be presented with a dialog box to ask if you want

to close app or wait. Select wait.

19. The emulator will start

20. Select the button with the 6 dots and select the terminal emulator

21. When the terminal starts enter the command ifconfig

22. Observe the wlan0 IP address

23. Great! The wlan0 has a valid IP4 address

24. Next, click on File → Close

25. Select Power Off The Machine and Press OK

26. At this point we’re back at the virtualization (in my case VirtualBox) home page

27. Double click on the Androidx86 virtual machine to start it

28. When the virtual machine starts, keep it on the first option and press Enter

29. The Android emulator will start

30. When the emulator starts you will be presented with the home screen

31. Click on the button with the six dots

32. Select Terminal Emulator

33. The terminal emulator will start

34. Enter the command ifconfig

35. Take notice of the wlan0 IP address – we will need that for our lab