mcgraw-hill©the mcgraw-hill companies, inc., 2004 1 chapter 16 connecting lans, backbone networks,...

1McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004

Chapter 16

Connecting LANs,Backbone Networks,

and Virtual LANs

2McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004

16.1 Connecting Devices16.1 Connecting Devices

Repeaters

Hubs

Bridges

Two-Layer Switches

3McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004

Figure 16.1 Connecting devices

4McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004

Figure 16.2 Repeater

5McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004

A repeater connects segments of a LAN.

NoteNote::

6McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004

A repeater forwards every frame; it has no filtering capability.

NoteNote::

7McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004

A repeater is a regenerator, not an amplifier.

NoteNote::

8McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004

Figure 16.3 Function of a repeater

9McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004

Figure 16.4 Hubs

10McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004

A bridge has a table used in filtering decisions.

NoteNote::

11McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004

Figure 16.5 Bridge

12McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004

A bridge does not change the physical (MAC) addresses in a frame.

NoteNote::

13McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004

Figure 16.6 Learning bridge

14McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004

Figure 16.7 Loop problem

15McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004

Figure 16.8 Prior to spanning tree application

16McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004

Figure 16.9 Applying spanning tree

17McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004

Figure 16.10 Forwarding ports and blocking ports

18McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004

16.2 Backbone Networks16.2 Backbone Networks

Bus Backbone

Star Backbone

Connecting Remote LANs

19McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004

In a bus backbone, the topology of the backbone is a bus.

NoteNote::

20McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004

Figure 16.11 Bus backbone

21McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004

In a star backbone, the topology of the backbone is a star; the backbone is

just one switch.

NoteNote::

22McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004

Figure 16.12 Star backbone

23McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004

Figure 16.13 Connecting remote LANs

24McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004

A point-to-point link acts as a LAN in a remote backbone connected by

remote bridges.

NoteNote::

25McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004

16.3 Virtual LANs16.3 Virtual LANs

Membership

Configuration

IEEE Standard

Advantages

26McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004

Figure 16.14 A switch connecting three LANs

27McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004

Figure 16.15 A switch using VLAN software

28McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004

Figure 16.16 Two switches in a backbone using VLAN software

29McGraw-Hill ©The McGraw-Hill Companies, Inc., 2004

VLANs create broadcast domains.

NoteNote::