microseismic interpretations and applications: beyond srv€¦ · craig cipolla, hess corporation...

Microseismic Interpretations and Applications:

Beyond SRV

MicroSeismic, Inc. User Group Meeting

Wednesday, February 19, 2014

Craig Cipolla, Hess Corporation

Reference: SPE 168596

Stimulated Reservoir Volume (SRV)

• First introduced by Fisher et al. (2004), Barnett Shale. o Fracture growth may be much more complex in unconventional

reservoirs.

o Microseismic volume could be correlated to production in specific areas.

Figure 22 from SPE 90051 Figure 4 from SPE 90051

Stimulated Reservoir Volume (SRV)

• Further defined by Mayerhofer et al. (2008) o Drainage volume may be limited to SRV.

o Fracture area is a key factor that controls productivity.

Figure 11 from SPE 119890

SRV-based Production Models

Figure 4 from SPE 90051

xf

ksrvkm

kfwf

The Missing Link The relationship between fracture geometry and conductivity and

well productivity and drainage volume.

Reference: SPE 168596

What is Stimulated Reservoir Volume (SRV)?

• Completion/Fracturing Engineers

– Microseismic volume

– Fracture geometry

– Maximum drainage distance

• Reservoir Engineers

– Drainage volume or area

– Stimulated region permeability, ksrv

– Effective fracture length

Focus on Microseismic

Focus on Production

Beyond SRV Microseismic Image

Natural Fractures (DFN)

Stress Regime (3D MEM) Hydraulic

fracture

Natural

fracture

Network Fracture Model

Complex Hydraulic Fractures

calibration using microseismic data

Beyond SRV Complex Hydraulic Fractures

Numerical Reservoir Simulation

• Discretely grid the complex hydraulic fracture

• Propped and un-propped fractures

• Stress sensitive fracture conductivity

Maintain the fidelity between the hydraulic fracture model and

numerical reservoir simulation

Pressure distribution at 10-years

Shale Gas Example: Microseismic

~4500 ft Lateral Cased & Cemented, Plug & Perf, 4 clusters/stage, 70 bpm

Hybrid Treatment Design: 12% 100-mesh, 75% 30/50 ceramic, 13% 20/40 ceramic

15 stages 109,000 bbls 4,400,000 lbs

Pi = 7650 psi

Ø= 4.7 %

Gas GR= 0.65

h= 132 ft

Tr= 180oF

Reference: SPE 168596

Shale Gas Example: Microseismic Volume SRV/ESV = 1800 MMft3

Hydraulic fracture area = ?

Fracture conductivity = ?

Distribution of conductivity = ?

Propped & un-propped fracture area = ?

Planar Fracture Model

Microseismic observation well

Fluid Efficiency ~ 76%

Total fracture area = 36 MM ft2

Total propped area = 13 MM ft2

Fracture area-pay = 14 MM ft2

Propped area-pay = 5 MM ft2

Planar Fractures Matched to MSM

Area =17.9 MMft2

Propped = 7.3 MMft2

Area-Pay = 12.2 MMft2

Prop-Pay = 5.4 MMft2

Fluid Efficiency ~ 42%

Microseismic observation well

Complex Fracture Modeling: 50 ft DFN

50 ft DFN

50 ft DFN Network

Fracture

Geometry

Complex Fracture Modeling: 50 ft DFN

Total fracture area = 29.7MM ft2

Total propped area = 8.4MM ft2

Fracture area-pay = 16.1MM ft2

Propped area-pay = 3.7MM ft2

Average xf ~ 400 ft Proppant concentration ~ 0.5 lb/ft2

50 ft DFN

Microseismic observation well

Fluid Efficiency ~ 74%

Complex Fracture Modeling: 50 ft DFN

Production Modeling

Shale Gas Example

15 stages, 4 clusters/stage

4,571 kgal, 4,430 klbs

Reference: SPE 168596

Reservoir Simulation Model Grid: 50-ft DFN Discrete gridding of the hydraulic fracture maintains the fidelity between

the fracture model and reservoir simulation

Honor fracture model distribution of propped fracture conductivity and un-propped fractures

Un-Propped Conductivity

0.01

0.1

1

10

0 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000

Co

nd

uct

ivit

y (m

d-f

t)

Closure Stress (psi)

Reference: Suarez, R. 2013. “Fracture Conductivity Measurements on Small and Large Scale Samples – Rock proppant and Rock Fluid Sensitivity.” Slides presented at the SPE Workshop on Hydraulic Fracture Mechanics Considerations for Unconventional Reservoirs, Rancho Palos Verdes, California, U.S.A., 11-13 September.

σmin

Current closure stress

at 4000 psi FBHP

Closure stress at

1500 psi FBHP

0

1000

2000

3000

4000

5000

6000

7000

8000

0

1,000,000

2,000,000

3,000,000

4,000,000

5,000,000

6,000,000

7,000,000

8,000,000

0 500 1000 1500 2000 2500 3000 3500 4000

BH

P (

psi

)

Gas

(M

CF)

Days

Network Fractures and Planar Fractures

75 ft DFN: 20 nd

50 ft DFN: 25 nd

BHP

History Forecast

BHP 50 ft DFN, UPC~0: 275 nd

Hydraulic fracture complexity can significantly impact recovery

Planar: 32 nd

Understanding matrix permeability is important

50-ft DFN – Base Case Forecast

Pressures at 10 years 10-yr recovery = 6.0 BCF

km = 25 nd Ø = 5%

Sw=20% H=132 ft

Pi= 7650

Un-propped conductivity may be a key factor when optimizing well spacing

50 ft DFN (UPC~0)

Pressure distribution at 10-years 10-yr recovery = 6.6 BCF

km = 275 nd Ø = 5%

Sw=20% H=132 ft

Pi= 7650

Un-propped conductivity may be a key factor when optimizing well spacing

Stage Spacing

15 stages, 4 clusters/stage

4,571 kgal, 4,430 klbs

versus

8 stages, 4 clusters/stage

2285 bbls, 2,215 klbs

Reference: SPE 168596

0

1,000,000

2,000,000

3,000,000

4,000,000

5,000,000

6,000,000

7,000,000

0 500 1000 1500 2000 2500 3000 3500 4000

Gas

(M

CF)

Days

Effect of Stage Spacing: 10-yr Recovery

8-stages

50 ft DFN, Network Hydraulic Fractures

15-stages

18% difference in production Almost twice the proppant, fluid, stages (1.875 X)

Over-lap and interference results in lower incremental production compared to planar fractures

Fracture Complexity & Stage Spacing

0

1

2

3

4

5

6

7

8

50-DFN 75-DFN Planar

1-y

ear

Gas

(B

CF)

Fracture Geometry

8-stages

15-stages18% 24% 69%

1-year

0

1

2

3

4

5

6

7

8

50-DFN 75-DFN Planar

10

-ye

ar G

as (

BC

F)

Fracture Geometry

8-stages

15-stages

18% 17%

38%

10-years

Fracture morphology may significantly impact optimum

stage spacing

More Incremental production for planar fractures

Tight Oil Example Microseismic Data: ~3000 ft section

500 ft 500 ft

Un-cemented ball-drop completion with swell packers 45 bpm,1600 bbl XL-gel, 110,000 lbs 20/40 ceramic proppant (per stage)

ko = 600 nd

Pi = 7030 psi

Ø= 5.1 %

Bo= 1.82 STB/RB

PBP= 3150 psi

µo= 0.37 cp

co= 1.13E-05 psi-1

h= 77 ft

Rsi= 1552 scf/bbl

Reservoir Data

Microseismic data from ~3000 ft of lateral “adapted” from SPE 166274

Tight oil example incorporates: Geomechanical study (3D MEM) Reservoir simulation history match (3-yrs production)

333 ft spacing (30 stages/10,000 ft)

Pressure distribution at 10-years

Stage spacing changes fracture complexity and “apparent” system permeability (ksrv)

42,000 bbls

ko=0.0006 md

Two phase flow : Oil and Gas

192 ft spacing (52 stages/10,000 ft) Stage spacing changes fracture complexity and “apparent” system permeability (ksrv)

51,000 bbls

Pressure distribution at 10-years

ko=0.0006 md

Two phase flow : Oil and Gas

Linear Flow Analysis: Network Fractures and Stage Spacing

0

0.002

0.004

0.006

0.008

0.01

0.012

0.014

100 150 200 250 300 350 400 450 500

k (m

d)

Stage Spacing (ft)

ksrv could be a function of stage spacing

Actual: ko=0.0006 md, xf~250 ft

xf = 190 ft

xf = 150 ft

xf = 145 ft

Fracture complexity and connectivity may change with different stage spacing

ksrv

Fracture Complexity and Permeability Assumptions Effect Optimum Stage Spacing

0

10

20

30

40

50

60

70

0 100 200 300 400 500 600 700

10 y

r O

il (M

STB

/100

0 ft

of

late

ral)

Stage Spacing (ft)

RTA results: ksrv = 0.01 md, xf=150 ft

Network fracture model: k=600 nd

(Linear flow analysis, Planar Fractures)

Conclusions

• The interpretation and application of microseismic images should include mass balance and fracture mechanics.

• Integrating fracture modeling, microseismic data, and production modeling may be required for completion optimization.

• RTA and LFA can provide important insights into well performance, but ksrv and xf may not be appropriate for completion optimization.

• Changes in stage spacing and fracture treatment design will likely result in different “apparent” permeability or ksrv.